mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-23 12:14:32 +08:00
ae3b5928d6
Coreboot provides the CMOS layout in the tables it passes to U-Boot. Use that to build an editor for the CMOS settings. Signed-off-by: Simon Glass <sjg@chromium.org>
191 lines
6.4 KiB
ReStructuredText
191 lines
6.4 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. sectionauthor:: Bin Meng <bmeng.cn@gmail.com>
|
|
|
|
Coreboot
|
|
========
|
|
|
|
Build Instructions for U-Boot as coreboot payload
|
|
-------------------------------------------------
|
|
Building U-Boot as a coreboot payload is just like building U-Boot for targets
|
|
on other architectures, like below::
|
|
|
|
$ make coreboot_defconfig
|
|
$ make all
|
|
|
|
Test with coreboot
|
|
------------------
|
|
For testing U-Boot as the coreboot payload, there are things that need be paid
|
|
attention to. coreboot supports loading an ELF executable and a 32-bit plain
|
|
binary, as well as other supported payloads. With the default configuration,
|
|
U-Boot is set up to use a separate Device Tree Blob (dtb). As of today, the
|
|
generated u-boot-dtb.bin needs to be packaged by the cbfstool utility (a tool
|
|
provided by coreboot) manually as coreboot's 'make menuconfig' does not provide
|
|
this capability yet. The command is as follows::
|
|
|
|
# in the coreboot root directory
|
|
$ ./build/util/cbfstool/cbfstool build/coreboot.rom add-flat-binary \
|
|
-f u-boot-dtb.bin -n fallback/payload -c lzma -l 0x1110000 -e 0x1110000
|
|
|
|
Make sure 0x1110000 matches CONFIG_TEXT_BASE, which is the symbol address
|
|
of _x86boot_start (in arch/x86/cpu/start.S).
|
|
|
|
If you want to use ELF as the coreboot payload, change U-Boot configuration to
|
|
use CONFIG_OF_EMBED instead of CONFIG_OF_SEPARATE.
|
|
|
|
To enable video you must enable CONFIG_GENERIC_LINEAR_FRAMEBUFFER in coreboot:
|
|
|
|
- Devices->Display->Framebuffer mode->Linear "high resolution" framebuffer
|
|
|
|
At present it seems that for Minnowboard Max, coreboot does not pass through
|
|
the video information correctly (it always says the resolution is 0x0). This
|
|
works correctly for link though.
|
|
|
|
You can run via QEMU using::
|
|
|
|
qemu-system-x86_64 -bios build/coreboot.rom -serial mon:stdio
|
|
|
|
The `-serial mon:stdio` part shows both output in the display and on the
|
|
console. It is optional. You can add `nographic` as well to *only* get console
|
|
output.
|
|
|
|
To run with a SATA drive called `$DISK`::
|
|
|
|
qemu-system-x86_64 -bios build/coreboot.rom -serial mon:stdio \
|
|
-drive id=disk,file=$DISK,if=none \
|
|
-device ahci,id=ahci \
|
|
-device ide-hd,drive=disk,bus=ahci.0
|
|
|
|
Then you can scan it with `scsi scan` and access it normally.
|
|
|
|
To use 4GB of memory, typically necessary for booting Linux distros, add
|
|
`-m 4GB`.
|
|
|
|
64-bit U-Boot
|
|
-------------
|
|
|
|
In addition to the 32-bit 'coreboot' build there is a 'coreboot64' build. This
|
|
produces an image which can be booted from coreboot (32-bit). Internally it
|
|
works by using a 32-bit SPL binary to switch to 64-bit for running U-Boot. It
|
|
can be useful for running UEFI applications, for example with the coreboot
|
|
build in `$CBDIR`::
|
|
|
|
DISK=ubuntu-23.04-desktop-amd64.iso
|
|
CBDIR=~/coreboot/build
|
|
|
|
cp $CBDIR/coreboot.rom.in coreboot.rom
|
|
cbfstool coreboot.rom add-flat-binary -f u-boot-x86-with-spl.bin \
|
|
-n fallback/payload -c lzma -l 0x1110000 -e 0x1110000
|
|
|
|
qemu-system-x86_64 -m 2G -smp 4 -bios coreboot.rom \
|
|
-drive id=disk,file=$DISK,if=none \
|
|
-device ahci,id=ahci \
|
|
-device ide-hd,drive=disk,bus=ahci.0 \
|
|
|
|
This allows booting and installing various distros, many of which are
|
|
64-bit-only, so cannot work with the 32-bit 'coreboot' build.
|
|
|
|
USB keyboard
|
|
------------
|
|
|
|
The `CONFIG_USE_PREBOOT` option is enabled by default, meaning that USB starts
|
|
up just before the command-line starts. This allows user interaction on
|
|
non-laptop devices which use a USB keyboard.
|
|
|
|
CBFS access
|
|
-----------
|
|
|
|
You can use the 'cbfs' commands to access the Coreboot filesystem::
|
|
|
|
=> cbfsinit
|
|
=> cbfsinfo
|
|
|
|
CBFS version: 0x31313132
|
|
ROM size: 0x100000
|
|
Boot block size: 0x4
|
|
CBFS size: 0xffdfc
|
|
Alignment: 64
|
|
Offset: 0x200
|
|
|
|
=> cbfsls
|
|
size type name
|
|
------------------------------------------
|
|
32 cbfs header cbfs master header
|
|
16720 17 fallback/romstage
|
|
53052 17 fallback/ramstage
|
|
398 raw config
|
|
715 raw revision
|
|
117 raw build_info
|
|
4044 raw fallback/dsdt.aml
|
|
640 cmos layout cmos_layout.bin
|
|
17804 17 fallback/postcar
|
|
335797 payload fallback/payload
|
|
607000 null (empty)
|
|
10752 bootblock bootblock
|
|
|
|
12 file(s)
|
|
|
|
=>
|
|
|
|
Memory map
|
|
----------
|
|
|
|
========== ==================================================================
|
|
Address Region at that address
|
|
========== ==================================================================
|
|
ffffffff Top of ROM (and last byte of 32-bit address space)
|
|
7a9fd000 Typical top of memory available to U-Boot
|
|
(use cbsysinfo to see where memory range 'table' starts)
|
|
10000000 Memory reserved by coreboot for mapping PCI devices
|
|
(typical size 2151000, includes framebuffer)
|
|
1920000 CONFIG_SYS_CAR_ADDR, fake Cache-as-RAM memory, used during startup
|
|
1110000 CONFIG_TEXT_BASE (start address of U-Boot code, before reloc)
|
|
110000 CONFIG_BLOBLIST_ADDR (before being relocated)
|
|
100000 CONFIG_PRE_CON_BUF_ADDR
|
|
f0000 ACPI tables set up by U-Boot
|
|
(typically redirects to 7ab10030 or similar)
|
|
500 Location of coreboot sysinfo table, used during startup
|
|
========== ==================================================================
|
|
|
|
|
|
Debug UART
|
|
----------
|
|
|
|
It is possible to enable the debug UART with coreboot. To do this, use the
|
|
info from the cbsysinfo command to locate the UART base. For example::
|
|
|
|
=> cbsysinfo
|
|
...
|
|
Serial I/O port: 00000000
|
|
base : 00000000
|
|
pointer : 767b51bc
|
|
type : 2
|
|
base : fe03e000
|
|
baud : 0d115200
|
|
regwidth : 4
|
|
input_hz : 0d1843200
|
|
PCI addr : 00000010
|
|
...
|
|
|
|
Here you can see that the UART base is fe03e000, regwidth is 4 (1 << 2) and the
|
|
input clock is 1843200. So you can add the following CONFIG options::
|
|
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_DEBUG_UART_BASE=fe03e000
|
|
CONFIG_DEBUG_UART_CLOCK=1843200
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_DEBUG_UART_ANNOUNCE=y
|
|
|
|
coreboot in CI
|
|
--------------
|
|
|
|
CI runs tests using a pre-built coreboot image. This ensures that U-Boot can
|
|
boot as a coreboot payload, based on a known-good build of coreboot.
|
|
|
|
To update the `coreboot.rom` file which is used, see ``tools/Dockerfile``
|
|
|
|
Editing CMOS RAM settings
|
|
-------------------------
|
|
|
|
U-Boot supports creating a configuration editor to edit coreboot CMOS-RAM
|
|
settings. See :ref:`cedit_cb_load`.
|