mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-23 12:14:32 +08:00
e28468076b
Add build instructions for the WeTek Hub and WeTek Play2 boards. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-15-christianshewitt@gmail.com [narmstrong: fixed doc build] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
112 lines
3.3 KiB
ReStructuredText
112 lines
3.3 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
U-Boot for WeTek Hub (S905)
|
|
===========================
|
|
|
|
WeTek Hub is a small form-factor Android STB manufactured by WeTek with the following
|
|
specification:
|
|
|
|
- Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
|
|
- ARM Mali 450 GPU
|
|
- 1GB DDR3 SDRAM
|
|
- 8GB eMMC
|
|
- Gigabit Ethernet
|
|
- HDMI 2.0 4K/60Hz display
|
|
- 1x USB otg
|
|
- microSD
|
|
- UART jack
|
|
- Infrared receiver
|
|
|
|
Schematics are not publicly available but have been shared privately to maintainers.
|
|
|
|
U-Boot Compilation
|
|
------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ export CROSS_COMPILE=aarch64-none-elf-
|
|
$ make wetek-hub_defconfig
|
|
$ make
|
|
|
|
U-Boot Signing with Pre-Built FIP repo
|
|
--------------------------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
|
|
$ cd amlogic-boot-fip
|
|
$ mkdir my-output-dir
|
|
$ ./build-fip.sh wetek-hub /path/to/u-boot/u-boot.bin my-output-dir
|
|
|
|
U-Boot Manual Signing
|
|
---------------------
|
|
|
|
Amlogic does not provide sources for the firmware and tools needed to create a bootloader
|
|
image and WeTek has not publicly shared the U-Boot sources needed to build FIP binaries
|
|
for signing. However you can download them from the amlogic-fip-repo.
|
|
|
|
.. code-block:: bash
|
|
|
|
$ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
|
|
$ cd amlogic-boot-fip/wetek-hub
|
|
$ export FIPDIR=$PWD
|
|
|
|
Go back to the mainline U-Boot source tree then:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ mkdir fip
|
|
|
|
$ cp $FIPDIR/bl2.bin fip/
|
|
$ cp $FIPDIR/acs.bin fip/
|
|
$ cp $FIPDIR/bl21.bin fip/
|
|
$ cp $FIPDIR/bl30.bin fip/
|
|
$ cp $FIPDIR/bl301.bin fip/
|
|
$ cp $FIPDIR/bl31.img fip/
|
|
$ cp u-boot.bin fip/bl33.bin
|
|
|
|
$ $FIPDIR/blx_fix.sh \
|
|
fip/bl30.bin \
|
|
fip/zero_tmp \
|
|
fip/bl30_zero.bin \
|
|
fip/bl301.bin \
|
|
fip/bl301_zero.bin \
|
|
fip/bl30_new.bin \
|
|
bl30
|
|
|
|
$ $FIPDIR/fip_create --bl30 fip/bl30_new.bin \
|
|
--bl31 fip/bl31.img \
|
|
--bl33 fip/bl33.bin \
|
|
fip/fip.bin
|
|
|
|
$ sed -i 's/\x73\x02\x08\x91/\x1F\x20\x03\xD5/' fip/bl2.bin
|
|
$ python3 $FIPDIR/acs_tool.py fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
|
|
|
|
$ $FIPDIR/blx_fix.sh \
|
|
fip/bl2_acs.bin \
|
|
fip/zero_tmp \
|
|
fip/bl2_zero.bin \
|
|
fip/bl21.bin \
|
|
fip/bl21_zero.bin \
|
|
fip/bl2_new.bin \
|
|
bl2
|
|
|
|
$ cat fip/bl2_new.bin fip/fip.bin > fip/boot_new.bin
|
|
|
|
$ $FIPDIR/aml_encrypt_gxb --bootsig \
|
|
--input fip/boot_new.bin
|
|
--output fip/u-boot.bin
|
|
|
|
Then write U-Boot to SD or eMMC with:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ DEV=/dev/boot_device
|
|
$ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 conv=fsync
|
|
$ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 seek=9 skip=8 count=87 conv=fsync,notrunc
|
|
$ dd if=/dev/zero of=fip/u-boot.bin.gxbb bs=512 seek=8 count=1 conv=fsync,notrunc
|
|
$ dd if=bl1.bin.hardkernel of=fip/u-boot.bin.gxbb bs=512 seek=2 skip=2 count=1 conv=fsync,notrunc
|
|
$ ./aml_chksum fip/u-boot.bin.gxbb
|
|
$ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
|
$ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=1 count=440
|