mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-26 21:54:37 +08:00
2f7ab49644
The Anbernic RG35XX series of devices are based around an Allwinner H700 SoC with 1GB of RAM, 2 SD cards, and multiple input buttons. This bootloader has been tested on the Anbernic RG35XX-2024 and RG35XX-H, but should be suitable for the entire lineup of H700 based devices. A future series of updates will add board selection logic to identify and load the correct device tree automatically. Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
28 lines
840 B
Plaintext
28 lines
840 B
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_SUNXI=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h700-anbernic-rg35xx-2024"
|
|
CONFIG_SPL=y
|
|
CONFIG_DRAM_SUN50I_H616_DX_ODT=0x08080808
|
|
CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
|
|
CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e
|
|
CONFIG_DRAM_SUN50I_H616_ODT_EN=0x7887bbbb
|
|
CONFIG_DRAM_SUN50I_H616_TPR2=0x1
|
|
CONFIG_DRAM_SUN50I_H616_TPR6=0x40808080
|
|
CONFIG_DRAM_SUN50I_H616_TPR10=0x402f6633
|
|
CONFIG_DRAM_SUN50I_H616_TPR11=0x1b1f1e1c
|
|
CONFIG_DRAM_SUN50I_H616_TPR12=0x06060606
|
|
CONFIG_DRAM_SUN50I_H616_PHY_ADDR_MAP_1=y
|
|
CONFIG_MACH_SUN50I_H616=y
|
|
CONFIG_SUNXI_DRAM_H616_LPDDR4=y
|
|
CONFIG_DRAM_CLK=672
|
|
CONFIG_R_I2C_ENABLE=y
|
|
CONFIG_SPL_I2C=y
|
|
CONFIG_SPL_SYS_I2C_LEGACY=y
|
|
CONFIG_SYS_I2C_MVTWSI=y
|
|
CONFIG_SYS_I2C_SLAVE=0x7f
|
|
CONFIG_SYS_I2C_SPEED=400000
|
|
CONFIG_REGULATOR_AXP=y
|
|
CONFIG_AXP717_POWER=y
|
|
CONFIG_AXP_DCDC2_VOLT=940
|
|
CONFIG_AXP_DCDC3_VOLT=1100
|