/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2012 * Texas Instruments, */ #ifndef _SPL_H_ #define _SPL_H_ #include /* Platform-specific defines */ #include #include #include #include struct blk_desc; struct image_header; /* Value in r0 indicates we booted from U-Boot */ #define UBOOT_NOT_LOADED_FROM_SPL 0x13578642 /* Boot type */ #define MMCSD_MODE_UNDEFINED 0 #define MMCSD_MODE_RAW 1 #define MMCSD_MODE_FS 2 #define MMCSD_MODE_EMMCBOOT 3 /* * u_boot_first_phase() - check if this is the first U-Boot phase * * U-Boot has up to three phases: TPL, SPL and U-Boot proper. Depending on the * build flags we can determine whether the current build is for the first * phase of U-Boot or not. If there is no SPL, then this is U-Boot proper. If * there is SPL but no TPL, the the first phase is SPL. If there is TPL, then * it is the first phase. * * @returns true if this is the first phase of U-Boot * */ static inline bool u_boot_first_phase(void) { if (IS_ENABLED(CONFIG_TPL)) { if (IS_ENABLED(CONFIG_TPL_BUILD)) return true; } else if (IS_ENABLED(CONFIG_SPL)) { if (IS_ENABLED(CONFIG_SPL_BUILD)) return true; } else { return true; } return false; } enum u_boot_phase { PHASE_TPL, /* Running in TPL */ PHASE_SPL, /* Running in SPL */ PHASE_BOARD_F, /* Running in U-Boot before relocation */ PHASE_BOARD_R, /* Running in U-Boot after relocation */ }; /** * spl_phase() - Find out the phase of U-Boot * * This can be used to avoid #ifdef logic and use if() instead. * * For example, to include code only in TPL, you might do: * * #ifdef CONFIG_TPL_BUILD * ... * #endif * * but with this you can use: * * if (spl_phase() == PHASE_TPL) { * ... * } * * To include code only in SPL, you might do: * * #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) * ... * #endif * * but with this you can use: * * if (spl_phase() == PHASE_SPL) { * ... * } * * To include code only in U-Boot proper, you might do: * * #ifndef CONFIG_SPL_BUILD * ... * #endif * * but with this you can use: * * if (spl_phase() == PHASE_BOARD_F) { * ... * } * * @return U-Boot phase */ static inline enum u_boot_phase spl_phase(void) { #ifdef CONFIG_TPL_BUILD return PHASE_TPL; #elif CONFIG_SPL_BUILD return PHASE_SPL; #else DECLARE_GLOBAL_DATA_PTR; if (!(gd->flags & GD_FLG_RELOC)) return PHASE_BOARD_F; else return PHASE_BOARD_R; #endif } /* A string name for SPL or TPL */ #ifdef CONFIG_SPL_BUILD # ifdef CONFIG_TPL_BUILD # define SPL_TPL_NAME "TPL" # else # define SPL_TPL_NAME "SPL" # endif # define SPL_TPL_PROMPT SPL_TPL_NAME ": " #else # define SPL_TPL_NAME "" # define SPL_TPL_PROMPT "" #endif struct spl_image_info { const char *name; u8 os; uintptr_t load_addr; uintptr_t entry_point; #if CONFIG_IS_ENABLED(LOAD_FIT) || CONFIG_IS_ENABLED(LOAD_FIT_FULL) void *fdt_addr; #endif u32 boot_device; u32 size; u32 flags; void *arg; #ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK ulong dcrc_data; ulong dcrc_length; ulong dcrc; #endif }; /* * Information required to load data from a device * * @dev: Pointer to the device, e.g. struct mmc * * @priv: Private data for the device * @bl_len: Block length for reading in bytes * @filename: Name of the fit image file. * @read: Function to call to read from the device */ struct spl_load_info { void *dev; void *priv; int bl_len; const char *filename; ulong (*read)(struct spl_load_info *load, ulong sector, ulong count, void *buf); }; /* * We need to know the position of U-Boot in memory so we can jump to it. We * allow any U-Boot binary to be used (u-boot.bin, u-boot-nodtb.bin, * u-boot.img), hence the '_any'. These is no checking here that the correct * image is found. For example if u-boot.img is used we don't check that * spl_parse_image_header() can parse a valid header. * * Similarly for SPL, so that TPL can jump to SPL. */ binman_sym_extern(ulong, u_boot_any, image_pos); binman_sym_extern(ulong, u_boot_any, size); binman_sym_extern(ulong, spl, image_pos); binman_sym_extern(ulong, spl, size); /** * spl_get_image_pos() - get the image position of the next phase * * This returns the image position to use to load the next phase of U-Boot */ ulong spl_get_image_pos(void); /** * spl_get_image_size() - get the size of the next phase * * This returns the size to use to load the next phase of U-Boot */ ulong spl_get_image_size(void); /** * spl_load_simple_fit_skip_processing() - Hook to allow skipping the FIT * image processing during spl_load_simple_fit(). * * Return true to skip FIT processing, false to preserve the full code flow * of spl_load_simple_fit(). */ bool spl_load_simple_fit_skip_processing(void); /** * spl_load_simple_fit() - Loads a fit image from a device. * @spl_image: Image description to set up * @info: Structure containing the information required to load data. * @sector: Sector number where FIT image is located in the device * @fdt: Pointer to the copied FIT header. * * Reads the FIT image @sector in the device. Loads u-boot image to * specified load address and copies the dtb to end of u-boot image. * Returns 0 on success. */ int spl_load_simple_fit(struct spl_image_info *spl_image, struct spl_load_info *info, ulong sector, void *fdt); #define SPL_COPY_PAYLOAD_ONLY 1 #define SPL_FIT_FOUND 2 /** * spl_load_imx_container() - Loads a imx container image from a device. * @spl_image: Image description to set up * @info: Structure containing the information required to load data. * @sector: Sector number where container image is located in the device * * Reads the container image @sector in the device. Loads u-boot image to * specified load address. */ int spl_load_imx_container(struct spl_image_info *spl_image, struct spl_load_info *info, ulong sector); /* SPL common functions */ void preloader_console_init(void); u32 spl_boot_device(void); /** * spl_mmc_boot_mode() - Lookup function for the mode of an MMC boot source. * @boot_device: ID of the device which the MMC driver wants to read * from. Common values are e.g. BOOT_DEVICE_MMC1, * BOOT_DEVICE_MMC2, BOOT_DEVICE_MMC2_2. * * This function should return one of MMCSD_MODE_FS, MMCSD_MODE_EMMCBOOT, or * MMCSD_MODE_RAW for each MMC boot source which is defined for the target. The * boot_device parameter tells which device the MMC driver is interested in. * * If not overridden, it is weakly defined in common/spl/spl_mmc.c. * * Note: It is important to use the boot_device parameter instead of e.g. * spl_boot_device() as U-Boot is not always loaded from the same device as SPL. */ u32 spl_mmc_boot_mode(const u32 boot_device); int spl_boot_partition(const u32 boot_device); void spl_set_bd(void); /** * spl_set_header_raw_uboot() - Set up a standard SPL image structure * * This sets up the given spl_image which the standard values obtained from * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START, * CONFIG_SYS_TEXT_BASE. * * @spl_image: Image description to set up */ void spl_set_header_raw_uboot(struct spl_image_info *spl_image); /** * spl_parse_image_header() - parse the image header and set up info * * This parses the legacy image header information at @header and sets up * @spl_image according to what is found. If no image header is found, then * a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is * enabled, then this causes a panic. If CONFIG_SPL_RAW_IMAGE_SUPPORT is not * enabled then U-Boot gives up. Otherwise U-Boot sets up the image using * spl_set_header_raw_uboot(), or possibly the bootz header. * * @spl_image: Image description to set up * @header image header to parse * @return 0 if a header was correctly parsed, -ve on error */ int spl_parse_image_header(struct spl_image_info *spl_image, const struct image_header *header); void spl_board_prepare_for_linux(void); void spl_board_prepare_for_boot(void); int spl_board_ubi_load_image(u32 boot_device); int spl_board_boot_device(u32 boot_device); /** * jump_to_image_linux() - Jump to a Linux kernel from SPL * * This jumps into a Linux kernel using the information in @spl_image. * * @spl_image: Image description to set up */ void __noreturn jump_to_image_linux(struct spl_image_info *spl_image); /** * spl_start_uboot() - Check if SPL should start the kernel or U-Boot * * This is called by the various SPL loaders to determine whether the board * wants to load the kernel or U-Boot. This function should be provided by * the board. * * @return 0 if SPL should start the kernel, 1 if U-Boot must be started */ int spl_start_uboot(void); /** * spl_display_print() - Display a board-specific message in SPL * * If CONFIG_SPL_DISPLAY_PRINT is enabled, U-Boot will call this function * immediately after displaying the SPL console banner ("U-Boot SPL ..."). * This function should be provided by the board. */ void spl_display_print(void); /** * struct spl_boot_device - Describes a boot device used by SPL * * @boot_device: A number indicating the BOOT_DEVICE type. There are various * BOOT_DEVICE... #defines and enums in U-Boot and they are not consistently * numbered. * @boot_device_name: Named boot device, or NULL if none. * * Note: Additional fields can be added here, bearing in mind that SPL is * size-sensitive and common fields will be present on all boards. This * struct can also be used to return additional information about the load * process if that becomes useful. */ struct spl_boot_device { uint boot_device; const char *boot_device_name; }; /** * Holds information about a way of loading an SPL image * * @name: User-friendly name for this method (e.g. "MMC") * @boot_device: Boot device that this loader supports * @load_image: Function to call to load image */ struct spl_image_loader { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT const char *name; #endif uint boot_device; /** * load_image() - Load an SPL image * * @spl_image: place to put image information * @bootdev: describes the boot device to load from */ int (*load_image)(struct spl_image_info *spl_image, struct spl_boot_device *bootdev); }; /* Declare an SPL image loader */ #define SPL_LOAD_IMAGE(__name) \ ll_entry_declare(struct spl_image_loader, __name, spl_image_loader) /* * _priority is the priority of this method, 0 meaning it will be the top * choice for this device, 9 meaning it is the bottom choice. * _boot_device is the BOOT_DEVICE_... value * _method is the load_image function to call */ #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT #define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \ SPL_LOAD_IMAGE(_boot_device ## _priority ## _method) = { \ .name = _name, \ .boot_device = _boot_device, \ .load_image = _method, \ } #else #define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \ SPL_LOAD_IMAGE(_boot_device ## _priority ## _method) = { \ .boot_device = _boot_device, \ .load_image = _method, \ } #endif /* SPL FAT image functions */ int spl_load_image_fat(struct spl_image_info *spl_image, struct blk_desc *block_dev, int partition, const char *filename); int spl_load_image_fat_os(struct spl_image_info *spl_image, struct blk_desc *block_dev, int partition); void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image); /* SPL EXT image functions */ int spl_load_image_ext(struct spl_image_info *spl_image, struct blk_desc *block_dev, int partition, const char *filename); int spl_load_image_ext_os(struct spl_image_info *spl_image, struct blk_desc *block_dev, int partition); /** * spl_early_init() - Set up device tree and driver model in SPL if enabled * * Call this function in board_init_f() if you want to use device tree and * driver model early, before board_init_r() is called. * * If this is not called, then driver model will be inactive in SPL's * board_init_f(), and no device tree will be available. */ int spl_early_init(void); /** * spl_init() - Set up device tree and driver model in SPL if enabled * * You can optionally call spl_early_init(), then optionally call spl_init(). * This function will be called from board_init_r() if not called earlier. * * Both spl_early_init() and spl_init() perform a similar function except that * the latter will not set up the malloc() area if * CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN is enabled, since it is assumed to * already be done by a calll to spl_relocate_stack_gd() before board_init_r() * is reached. * * This function will be called from board_init_r() if not called earlier. * * If this is not called, then driver model will be inactive in SPL's * board_init_f(), and no device tree will be available. */ int spl_init(void); #ifdef CONFIG_SPL_BOARD_INIT void spl_board_init(void); #endif /** * spl_was_boot_source() - check if U-Boot booted from SPL * * This will normally be true, but if U-Boot jumps to second U-Boot, it will * be false. This should be implemented by board-specific code. * * @return true if U-Boot booted from SPL, else false */ bool spl_was_boot_source(void); /** * spl_dfu_cmd- run dfu command with chosen mmc device interface * @param usb_index - usb controller number * @param mmc_dev - mmc device nubmer * * @return 0 on success, otherwise error code */ int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr); int spl_mmc_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev); /** * spl_mmc_load() - Load an image file from MMC/SD media * * @param spl_image Image data filled in by loading process * @param bootdev Describes which device to load from * @param filename Name of file to load (in FS mode) * @param raw_part Partition to load from (in RAW mode) * @param raw_sect Sector to load from (in RAW mode) * * @return 0 on success, otherwise error code */ int spl_mmc_load(struct spl_image_info *spl_image, struct spl_boot_device *bootdev, const char *filename, int raw_part, unsigned long raw_sect); int spl_ymodem_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev); /** * spl_invoke_atf - boot using an ARM trusted firmware image */ void spl_invoke_atf(struct spl_image_info *spl_image); /** * bl2_plat_get_bl31_params() - prepare params for bl31. * @bl32_entry address of BL32 executable (secure) * @bl33_entry address of BL33 executable (non secure) * @fdt_addr address of Flat Device Tree * * This function assigns a pointer to the memory that the platform has kept * aside to pass platform specific and trusted firmware related information * to BL31. This memory is allocated by allocating memory to * bl2_to_bl31_params_mem structure which is a superset of all the * structure whose information is passed to BL31 * NOTE: This function should be called only once and should be done * before generating params to BL31 * * @return bl31 params structure pointer */ struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl32_entry, uintptr_t bl33_entry, uintptr_t fdt_addr); /** * spl_optee_entry - entry function for optee * * args defind in op-tee project * https://github.com/OP-TEE/optee_os/ * core/arch/arm/kernel/generic_entry_a32.S * @arg0: pagestore * @arg1: (ARMv7 standard bootarg #1) * @arg2: device tree address, (ARMv7 standard bootarg #2) * @arg3: non-secure entry address (ARMv7 bootarg #0) */ void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3); /** * spl_invoke_opensbi - boot using a RISC-V OpenSBI image */ void spl_invoke_opensbi(struct spl_image_info *spl_image); /** * board_return_to_bootrom - allow for boards to continue with the boot ROM * * If a board (e.g. the Rockchip RK3368 boards) provide some * supporting functionality for SPL in their boot ROM and the SPL * stage wants to return to the ROM code to continue booting, boards * can implement 'board_return_to_bootrom'. */ int board_return_to_bootrom(struct spl_image_info *spl_image, struct spl_boot_device *bootdev); /** * board_spl_fit_post_load - allow process images after loading finished * */ void board_spl_fit_post_load(ulong load_addr, size_t length); /** * board_spl_fit_size_align - specific size align before processing payload * */ ulong board_spl_fit_size_align(ulong size); /** * spl_perform_fixups() - arch/board-specific callback before processing * the boot-payload */ void spl_perform_fixups(struct spl_image_info *spl_image); /* * spl_get_load_buffer() - get buffer for loading partial image data * * Returns memory area which can be populated by partial image data, * ie. uImage or fitImage header. */ struct image_header *spl_get_load_buffer(ssize_t offset, size_t size); #endif