Commit Graph

5637 Commits

Author SHA1 Message Date
Ran Wang
02d2a4d33b configs: p3041ds: enable CONFIG_DM_USB support
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-23 14:08:27 +05:30
Holger Brunck
05577fa518 ppc/km: convert KM_DEF_NETDEV to Kconfig
Remove this from the board header files and move it to Kconfig. Also use
the correct default address for kmtegr1.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
CC: Priyanka Jain <priyanka.jain@nxp.com>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
2019-12-23 14:06:47 +05:30
Diego Rondini
e7c15b7ab8 sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2
Orangepi Zero Plus 2 is an open-source single-board computer, available
in two Allwinner SOC variants, H3 and H5. We add support for H3 variant
here, as the H5 is already supported.

H3 Orangepi Zero Plus 2 has:
- Quad-core Cortex-A7
- 512MB DDR3
- microSD slot and 8GB eMMC
- Debug TTL UART
- HDMI
- Wifi + BT
- OTG + power supply

Sync dts from linux v5.2 commit:
"ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry"
(sha1: 75f9a058838be9880afd75c4cb14e1bf4fe34a0b)
Commit:
"ARM: dts: sun8i: h3: Refactor the pinctrl node names"
(sha1: a4dc791974e568a15f7f37131729b1a6912f4811)
has been avoided as it breaks U-Boot build.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-18 20:14:16 +05:30
Patrick Delaunay
eddd79291d stm32mp1: configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-12-18 11:58:36 +01:00
Tudor Ambarus
96b225b0c8 configs: sama5d27_wlsom1_ek: mmc: Enable SPI NOR ethaddr retrieval
Enable the SPI NOR SFDP support and the Microchip QSPI driver.
CONFIG_SPI_FLASH_SFDP_SUPPORT enables the SFDP Vendor parser,
and for the SST case, the retrieval of the ethaddr from the
SPI NOR flash.

While touching the SPI NOR logic, sync with the
sama5d27_wlsom1_ek_qspiflash_defconfig and enable
CONFIG_SPI_FLASH_SPANSION.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-12-17 09:49:05 +02:00
Tudor Ambarus
3dbd23e8c3 configs: sama5d27_wlsom1_ek: qspiflash: Enable SPI NOR ethaddr retrieval
CONFIG_SPI_FLASH_SFDP_SUPPORT enables the SFDP Vendor parser,
and for the SST case, the retrieval of the ethaddr from the
SPI NOR flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-12-17 09:49:05 +02:00
Simon Glass
a1d6dc3f84 x86: Add chromebook_coral
Add support for coral which is a range of Apollo Lake-based Chromebook
released in 2017. This also includes reef released in 2016, since it is
based on the same SoC.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:30 +08:00
Simon Glass
e556d3d630 x86: Enable pinctrl in SPL and TPL
If these phases are used we typically want to enable pinctrl in then, so
that pad setup and GPIO access are possible.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:24 +08:00
Simon Glass
b31129528e x86: Add an option to control the position of U-Boot
The existing work-around for positioning U-Boot in the ROM when it
actually runs from RAM still exists and there is not obvious way to change
this.

Add a proper Kconfig option to handle this case. This also adds a new bool
property to indicate whether CONFIG_SYS_TEXT_BASE exists.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:19 +08:00
Simon Glass
fbb0efdd27 sandbox: Add a test for IRQ
Add a simple sandbox test for this uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:12 +08:00
Simon Glass
3e17ffbb44 sandbox: Add PCI driver and test for p2sb
Add a sandbox driver and PCI-device emulator for p2sb. Also add a test
which uses a simple 'adder' driver to test the p2sb functionality.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:11 +08:00
Simon Glass
bcee8d6764 dm: gpio: Allow control of GPIO uclass in SPL
At present if CONFIG_SPL_GPIO_SUPPORT is enabled then the GPIO uclass
is included in SPL/TPL without any control for boards. Some boards may
want to disable this to reduce code size where GPIOs are not needed in
SPL or TPL.

Add a new Kconfig option to permit this. Default it to 'y' so that
existing boards work correctly.

Change existing uses of CONFIG_DM_GPIO to CONFIG_IS_ENABLED(DM_GPIO) to
preserve the current behaviour. Also update the 74x164 GPIO driver since
it cannot build with SPL.

This allows us to remove the hacks in config_uncmd_spl.h and
Makefile.uncmd_spl (eventually those files should be removed).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 08:52:29 +08:00
Grygorii Strashko
7da4fb9235 arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfig
Move BOOTP_DNS2 and PHY_TI from dra7xx_evm.h to
dra7xx_evm_defconfig.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-12-13 13:01:54 -05:00
Rasmus Villemoes
875669da3b sysreset_mpc83xx: fix mcp83xx -> mpc83xx typo
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2019-12-13 13:01:53 -05:00
Tom Rini
f39abbbc53 - fix DRAM bank detection for unified binary
- fix 32bit RPi4 config
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl3w+BwSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+NN0P/12PTurFaiQqBWg27iysIwON9McHpUgU
 UvhE/iEgcu6ZOnByElQGda7077zw9pp1toNUd8TvCYhPb1JRN+njd0ALk2k04NRu
 C1s11fbm+SVe7Dizn8PQcJda/efk8vo68jlRVGKPcrH51P+iIvgi5J8K96EQcef5
 zPrQkRUyYP2ucXvvyKbax+B6n7xBSo7dF3psUP+xDSOZkBvxmoWd2QAplRPpJ8/D
 A0FfXSSt89mnCkBvanY7h1B9GGIh7hpJvFK5SJ9SaZbV5q/Z8AaOEFc3Q7q38CKN
 JRlkb5ZHIQ5rTmlww9xU7Ey5YSR3lfE7DmFx7cmw0NLXH14uAnUzVzEVoMPvLV9q
 gT8ueVXI8wLX+0oohAsDKxhCXCZOOKrTPPC967CPyxr+FsJf7WWP3aFmpCoS4lx4
 h2DnZjAurXByYaTejfZL+4bWVYBN5Sk3KGdq5vUyap5iwhqczUDREdkmMnoSYAcv
 pVjhwcl5V+kcdNXji4/1TLQqa3N6JZZRJFNNiYoyBw+b53V2NY5xqCT8BR+xX7Hm
 UypPhIos3lO6pM0kyneQe9RohMD0PR9S6ZsLKh39Mzh30cDcKYXTmnEpy+m+Bqah
 RiVd2ZvhA9Xo4LPLusK3n2hqmRvV0Xmpm78ebQmBFqvgJXM7rK8Qeq4ymQybLX6N
 BgTglX6j5zMw
 =nS+n
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2020.01.2' of https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi

- fix DRAM bank detection for unified binary
- fix 32bit RPi4 config
2019-12-11 09:29:39 -05:00
Tom Rini
addb1d9f5d First set of u-boot-atmel fixes for 2020.01 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJd77jyAAoJEB6zHgIOrC/IyYUH/iAUH4wo5qnOBiQU+MJluaiu
 D8tMiJH13eW4gWnAqdGrOE9Q763asHIMshQpLK+4eXe4f4mZQ7re4CRNcYJrULeY
 2StsJzl4sn/H4P5EiRuUWjkB7wnGRDD6ArH3j1uMJN4lpwCB0ZbqMQZpjt3wI2H4
 KuE42d/ll08Aj0AvwdusffLIxlw5M1Z94uQSHoC3UTkPYN4VD5zXgdxv5eH6PZWe
 paWmHQ0g7fL4UnYGWa0Jpx10SZpcut06dTeVGpsGiEOhaJHvpjYd4JAs/TTUxhFx
 d5ZRjo1fStYmBXQIblhPNlJQkW4cqa/B+81f5aZbN/1yCijJWS2G8anGtY2ikPs=
 =f0dF
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-fixes-2020.01-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

- First set of u-boot-atmel fixes for 2020.01 cycle:
  This set includes a small fix for gpio bank names, one for removing
  unused headers (also touches some other boards), and a fix for the QSPI
  env read on one of the boards.
2019-12-11 08:16:16 -05:00
Matthias Brugger
e5167465a1 ARM: defconfig: Fix 32bit config for RPi4
The rpi_4_32b_defconfig states that only one DRAM bank is present. This
leads to a wrong configuration of the available DRAM. Fix this by
setting the DRAM bank config accordingly.

Fixes: 193279d784 ("RPI: Add defconfigs for rpi4 (32/64)")

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-12-11 10:14:13 +01:00
Tom Rini
fd4b8f813f - fix crash and board reset when drawing RLE8 bitmaps
bigger than the framebuffer resolution
 - reduce dead code in video and console uclass routines
   (tested on mx53cx9020, sama5d2_xplained, stm32mp157c-ev1,
    stm32f746-disco, stm32f769-disco and wandboard)
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXe//LA4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXOqBAJ9N6oTID0v092duxoUoO5xAeqIKxgCfS/YvgGx4
 KGgiPWQv0V1bGxXyYNA=
 =PoNP
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- fix crash and board reset when drawing RLE8 bitmaps
  bigger than the framebuffer resolution
- reduce dead code in video and console uclass routines
  (tested on mx53cx9020, sama5d2_xplained, stm32mp157c-ev1,
   stm32f746-disco, stm32f769-disco and wandboard)
2019-12-10 15:41:15 -05:00
Swapna Gurumani
e50d238a1c configs: sama5d27_som1_ek: Add default config to read ENV from QSPI
In the initial SPI flash setup, the default bus mode being used was 3,
which is incorrect, causing a CRC error when the ENV was being read from
QSPI. Setting the default bus mode to 0 which is the correct mode.

Signed-off-by: Swapna Gurumani <swapna.gurumani@microchip.com>
2019-12-10 12:43:50 +02:00
Tom Rini
520f955902 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- Increase stack size to avoid a stack overflow during distro boot.
- Add hifive-unleashed-a00.dts for SIFIVE FU540.
- Add OF_SEPARATE support for SIFIVE FU540.
- Add SPL support for Andes AX25 AE350.
- Improve U-Boot SPL / OpenSBI smp boot flow for RISC-V.
2019-12-09 21:53:23 -05:00
Rick Chen
cd61e86e6d riscv: ax25-ae350: add SPL configuration
This patch provides four configurations which can support U-Boot SPL
to boot from RAM or FLASH and then boot FIT image including OpenSBI
FW_DYNAMIC firmware and U-Boot proper images from RAM or MMC boot devices.

With ae350_rv[32|64]_spl_defconfigs:

U-Boot SPL will be loaded by gdb or FSBL and runs in RAM in machine mode
and then load FIT image from RAM device on AE350.

With ae350_rv[32|64]_spl_xip_defconfigs:

U-Boot SPL can be burned into SPI flash and run in flash in machine mode
and then load FIT image from SPI flash or MMC device on AE350.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: KC Lin <kclin@andestech.com>
Cc: Alan Kao <alankao@andestech.com>
2019-12-10 08:23:10 +08:00
Rick Chen
31fbf6032d Use dts support from U-Boot via OF_SEPARATE instead of depending from opensbi.
This would help to make the necessary changes in drivers and device trees
in U-Boot tree itself. This feature would also be helpful to not pass
dtb during opensbi builds.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Rick Chen <rick@andestech.com>
2019-12-10 08:23:10 +08:00
Tom Rini
ac1ca99926 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-net 2019-12-09 13:48:22 -05:00
Vignesh Raghavendra
c627abe0de configs: j721e_evm_a72_defconfig: Enable DMA and Ethernet
Enable configs related to DMA and Ethernet so as to support networking at
U-Boot prompt

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-12-09 09:47:43 -06:00
Tom Rini
2f02845817 Fixes for 2020.01
-----------------
 
 - imx8qxp_mek: increase buffer sizes and args number
 - Fixes for imx7ulp
 - imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
 - colibri_imx7: reserve DDR memory for Cortex-M4
 - vining2000: fixes and convert to ethernet DM
 - imx8m: fix rom version check to unbreak some B0 chips
 - tbs2910: Disable VxWorks image booting support
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl3uLqsPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3YEEL/jAKMnREGNHCjvwvxkVVZ7sWHeRtqh+OXb8V
 VnZB0glptth1NDxWyHFZkcsVqjpRlUsm3/lA91xaFXcUB8EWnJMKVReHkB7v0bZW
 zHziN0rNPoTBVocRlpgPXt3zeSOR3Qg+rFesg4zmlXNIVPyvBanpDCxXDK60gdIi
 JDrAdIarP0UMK0roIFLIyvnJ+J/ib1ky1aJI8cdktXb+nSyVrMw5VDdmSBtTCp10
 6o/fJGtWfzXp59a8y9XnnVxNsU2c0URcsswub4fvWhhwJ86xiWGSEfm5Sybql6kS
 6PYjB7jGmdWJjYug7rFthl1Hnn1FULIH9qrxPePtD2ooUUjHPlDmElQqWkHoVlib
 yUAlWG87ZdjhmEMR1iSFlkcBpOD7SlmcvfYZdeedCdtzTwW0kj6lcX9fUKHE+17e
 3SJQtPxpMrVfnUDRn0ciAbwg8+1Tow6sv39j6iYi7jAITny9q16ErdRGup0wB19Y
 tZkmRdnhtjCalrfDoEaRGXZJDE15XQ==
 =L2zo
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191209' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2020.01
-----------------

- imx8qxp_mek: increase buffer sizes and args number
- Fixes for imx7ulp
- imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
- colibri_imx7: reserve DDR memory for Cortex-M4
- vining2000: fixes and convert to ethernet DM
- imx8m: fix rom version check to unbreak some B0 chips
- tbs2910: Disable VxWorks image booting support
2019-12-09 10:32:08 -05:00
Anatolij Gustschin
2cc393f32f video: make BPP and ANSI configs optional
Many boards do not use all selected framebuffer depth
configurations, for such boards there is some unused
code in video and console uclass routines. Make depth
specific code optional to avoid dead code and slightly
reduce binary size. Also make ANSI code optional for
the same reason. When i.e. using only VIDEO_BPP16 the
code size shrinks (below values when using gcc-7.3.0):

  $ ./tools/buildman/buildman -b video-wip -sS wandboard
  ...
  01: Merge git://git.denx.de/u-boot-sh
  02: video: add guards around 16bpp/32bbp code
  03: video: make BPP and ANSI configs optional
         arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-12-06 16:38:51 +01:00
Tom Rini
bead4f2f2c Merge tag 'u-boot-rockchip-20191206' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- rockchip pwm driver update to support all the SoCs
- RK3308 GMAC and pinctrl support
- More UART interface support on PX30 and pmugrf reg fix
- Fixup on misc for eth_addr/serial#
- Other updates on variant SoCs
2019-12-06 10:35:18 -05:00
Marek Vasut
b6b6c1d7bd ARM: imx: vining2000: Enable fitImage support
The fitImage support was enabled in the downstream U-Boot port and the
kernel images on the device are fitImage, yet this functionality is not
enabled in mainline U-Boot. Enable it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
26822fd23c ARM: imx: vining2000: Convert to ethernet DM
Convert the board to ethernet DM support. Adjust board file accordingly,
as the board_eth_init() contains custom clock configuration required for
this board to work. Furthermore, enable FEC1 clock to make FEC1 work as
well.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
5b97abab55 ARM: imx: vining2000: Enable DDR DRAM calibration
Enable DRAM calibration in SPL to improve behavior of the board
in edge conditions of the thermal envelope of the board and make
it even more stable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
7d84f4469f ARM: imx: vining2000: Convert to SPL framework
In preparation for use of DDR DRAM fine-tuning upon boot,
convert the board to SPL framework instead of using DCD
tables to bring up DRAM and pinmux.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Fabio Estevam
1fae23899c warp7: Fix U-Boot corruption after saving the environment
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.

Running "saveenv" followed by a "reset" causes U-Boot to hang because
of this overlap.

Fix this problem by increasing the CONFIG_ENV_OFFSET size.

Also, in order to prevent this same problem in the future, use
CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.

CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Acked-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Joris Offouga <offougajoris@gmail.com>
2019-12-06 12:09:25 +01:00
Ben Wolsieffer
893b4d0df4 rockchip: rk3328: rock64: enable CONFIG_MISC_INIT_R
This enables reading of the cpuid and a static MAC address.

Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06 00:06:23 +08:00
Kever Yang
502573686f rockchip: config: add support for firefly-px30 board
This is a core board named Core-PX30-JD4 with a mainboard from Firefly,
name it as firefly-px30 for now.
This board can re-use the dts of PX30, the only difference is the UART IO,
the firefly use UART2 M1 while evb use UART2 M0.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06 00:06:23 +08:00
Andy Yan
1b8114ac1e rockchip: evb-px5: disable NET
PX5 evb has no ETH port, so disable it.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05 23:53:07 +08:00
Adam Ford
8cc738b9fc ARM: omapl138_lcdk: Shrink code size by building with Thumb
SPL has limited available resources, and the performance between
ARM and Thumb isn't that significant.

This patch builds using Thumb instruction set to reduce the code
size by nearly 6K.

Original:
   text	   data	    bss	    dec	    hex	filename
  26526	   4004	   1376	  31906	   7ca2	spl/u-boot-spl

Thumb:

   text	   data	    bss	    dec	    hex	filename
  20232	   4004	   1376	  25612	   640c	spl/u-boot-spl

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-05 10:28:39 -05:00
Adam Ford
81b564353d ARM: da850-evm: Disable SYS_MMCSD_RAW_MODE_USE_SECTOR
The da850-evm doesn't have the boot pins configured in a way
to make MMC/SD booting an option, and MMC/SD support is not
enabled in SPL.  Therefore, there is no need to support raw mode
mmc/sd support in SPL.

This patch disables CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-12-05 10:28:39 -05:00
Tom Rini
7e5ee346fc Merge git://git.denx.de/u-boot-sh
- Convert some R-Car Gen3 platforms to DM_SPI{,_FLASH}
2019-12-04 18:10:04 -05:00
Tom Rini
0cfccb5401 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 17:18:38 -05:00
Miquel Raynal
f3a02d29e8 dfu: add dependency on the raw NAND core
CONFIG_DFU_NAND needs the raw NAND core being compiled.

Also fix the colibri_vf defconfig to reflect this dependency.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04 17:10:51 -05:00
Miquel Raynal
e81f03248e configs: ls104x/ls108x/ls208x: Build the raw NAND core with TFABOOT
Enabling TFABOOT configuration will compile-in a call to nand_read in
the boot sequence. Handle the situation by also selecting officially
the raw NAND core in this case.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-12-04 17:10:51 -05:00
Miquel Raynal
7db785c703 configs: socfpga: mcvevk: Remove useless UBI infos
There is no flash on this board, there is no reason to define MTD
environment variables nor UBI. Drop them from the configuration file.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Wolfgang Grandegger <wg@aries-embedded.de>
2019-12-04 17:10:51 -05:00
Miquel Raynal
910bc26ee9 configs: remove MTD support from bcm11130 and M54418TWR defconfigs
While the right Kconfig entries were selected, because of the missing
CMD_NAND symbol the raw NAND core was never compiled. Remove it from
the defconfigs otherwise the build will fail.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Also do this on bcm11130_nand]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
452f22e7e3 configs: remove raw NAND core from k2g defconfigs
Due to previous Makefile organization, the raw NAND subdirectory was
not compiled in if CMD_NAND was not enabled. Because the Denali driver
does not compile with these boards (undefined environment offset),
remove the dependency within the defconfig over the controller driver
(was ignored anyway in the past).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
e0a4c2d2a7 configs: move CONFIG_MTD in defconfigs when set in arch includes
Let's be consistent and always declare CONFIG_MTD from the defconfig
file when needed.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
f6434a9561 mtd: ensure MTD is compiled when CMD_MTDPARTS is selected
MTD support must be enabled when using mtdparts. Indeed, functions
like get_mtd_info(), get_mtd_device() and put_mtd_device() are in
drivers/mtd/mtd_uboot.c and are built only with CONFIG_MTD.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
2fa872ee77 mtd: ensure CMD_NAND is compiled when its options are selected
In some files, options of CMD_NAND are selected but not the command
itself. Fix this inconsistency.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
7ccc3f3018 mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selected
Raw NAND support must be enabled when the environment is in NAND.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
00e270473e mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selected
UBI must be enabled when the environment is in UBI.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
f344fb1540 mtd: ensure UBI is compiled when using fastmap
UBI must be enabled when using fastmap, reflect this is defconfigs.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
63ea317245 mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD
MTD must be enabled when there is a SPI NOR flash using the
SPI_FLASH_MTD config entry.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-04 13:26:17 -05:00
Miquel Raynal
d4c2f6b7e3 mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash
Both symbols must be enabled when there is a raw NAND driver
selected. Also enable them when CONFIG_CMD_NAND is selected to avoid
breaking things when we'll further rework the MTD dependency
description.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
[trini: Rebase and migrate a few more boards here]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 13:26:17 -05:00
Marek Vasut
019c9b3ea8 ARM: rmobile: Convert M2N Gose to DM_SPI{,_FLASH}
Enable DM_SPI and DM_SPI_FLASH in U-Boot on M2N Gose.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-04 18:57:05 +01:00
Marek Vasut
d22c65d139 ARM: rmobile: Convert M2W Koelsch to DM_SPI{,_FLASH}
Enable DM_SPI and DM_SPI_FLASH in U-Boot on M2W Koelsch.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-04 18:57:05 +01:00
Marek Vasut
20be3e2ca7 ARM: rmobile: Convert H2 Lager to DM_SPI{,_FLASH}
Enable DM_SPI and DM_SPI_FLASH in U-Boot on H2 Lager.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-12-04 18:57:04 +01:00
Miquel Raynal
888f184abe mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD
Like in Linux, just use CONFIG_MTD to compile the MTD stack.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03 23:04:10 -05:00
Miquel Raynal
1de770d544 mtd: rename CONFIG_MTD -> CONFIG_DM_MTD
CONFIG_MTD must be reserved for the MTD core. Like any other
subsystem, prefix the symbol by DM when it comes to DM support.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
[trini: Add Kconfig files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03 23:04:10 -05:00
Miquel Raynal
88718be300 mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND
Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-03 23:04:10 -05:00
Michal Simek
c9f417b28a arm64: zynqmp: Point zcu216 defconfig to correct dts file
Defconfig is pointing to incorrect DT file which needs to be fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-12-03 12:00:25 -05:00
mingming lee
abf2c68566 ARM: MediaTek: add basic support for MT8518 boards
This adds a general board file based on MT8518 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8518 eMMC board.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
[trini: Migrate env location to defconfig, set ENV_IS_IN_MMC]
Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03 12:00:03 -05:00
Adam Ford
5d7f5ac38e ARM: omapl138_lcdk: Enable SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE
In order to further prepare for full device tree support in SPL,
this patch enables both SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE.
Both of these are already enabled in U-Boot, so SPL will have
the same functionality

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03 08:44:13 -05:00
Adam Ford
cfa84e3206 ARM: omapl138_lcdk: Increase malloc pool before relocation
Driver model requires a malloc pool to allocate memory before
relocations to operate serial and some other devices.  This patch
increases the pool size to 2K.

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03 08:44:13 -05:00
Adam Ford
efa68e82a2 ARM: omapl138_lcdk: Separate BSS in SPL
In preparation to use full device tree support, SPL can separate
BSS from text region.

This patch enables SPL_SEPARATE_BSS.

Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-03 08:43:24 -05:00
Tom Rini
e78f16b751 Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CORTINA_FW_IN_MMC
   CONFIG_SYS_CORTINA_FW_IN_NAND
   CONFIG_SYS_CORTINA_FW_IN_NOR
   CONFIG_SYS_CORTINA_FW_IN_REMOTE
   CONFIG_SYS_CORTINA_FW_IN_SPIFLASH

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03 08:43:24 -05:00
Tom Rini
60f3c01596 Convert CONFIG_PHY_CORTINA to Kconfig
This converts the following to Kconfig:
   CONFIG_PHY_CORTINA

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03 08:43:24 -05:00
Tom Rini
9a94a8994a tbs2910: Disable VxWorks image booting support
There are currently no known users of this functionality on this
platform, disable it to prepare for additional VxWorks functionality
that would cause this platform to fail to link.

Cc: Soeren Moch <smoch@web.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Soeren Moch <smoch@web.de>
2019-12-03 08:43:23 -05:00
Tom Rini
a80a49b237 tbs2910: Disable VxWorks image booting support
There are currently no known users of this functionality on this
platform, disable it to prepare for additional VxWorks functionality
that would cause this platform to fail to link.

Cc: Soeren Moch <smoch@web.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Soeren Moch <smoch@web.de>
2019-12-03 11:13:05 +01:00
Tom Rini
357040645f Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- fsl-qoriq : Minor bug fixes and updates on lx2160a, ls1028a, ls1012a,
  ls1043aqds platforms
2019-12-02 10:53:34 -05:00
Tom Rini
1f3813c2ab Merge branch 'master' of git://git.denx.de/u-boot-mips
- MIPS: remove Micronas VCT boards
2019-12-02 10:53:07 -05:00
Daniel Schwierzeck
2a250ae9b6 MIPS: remove Micronas VCT boards
The deadline for migration to CONFIG_DM is v2020.01. The VCT
baords would need an almost complete rewrite of all drivers to
support driver model.

Unless someone has access to the hardware and volunteers to do the migration,
the board should be scheduled for removal.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
2019-11-29 16:18:35 +01:00
Alex Marginean
873d00a3fb configs: ls1028a: enable CMD_DM
Since at least some of the drivers relevant to LS1028A are now following
DM, it's useful to have dm command enabled by default.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-29 10:38:12 +05:30
Priyanka Jain
7a8d9fd73c configs/lx2160a: Add CONFIG_ENV_SECT_SIZE in defconfig
Define CONFIG_ENV_SECT_SIZE as 0x20000 in lx2160a related defconfigs:
lx2160ardb_tfa_defconfig, lx2160ardb_tfa_SECURE_BOOT_defconfig,
lx2160aqds_tfa_defconfig, lx2160aqds_tfa_SECURE_BOOT_defconfig

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-29 10:38:12 +05:30
Tom Rini
c4f697b291 Merge git://git.denx.de/u-boot-usb
- USB keyboard improvements
2019-11-28 07:34:21 -05:00
Tom Rini
29061447a0 - Solve warning for stih410-b2260
- Device tree alignment on v5.4-rc4 for all stm32 boards
 - Correct the eMMC pin configuration on stm32mp157c-ev1
 - Add DFU and SPI-NAND support for stm32mp1 board
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl3dN0YACgkQ4rK92eCq
 k3WlywgAisVONrdkoC345Kq1vQRcKGYxcWVd0IWkuK3QZ4KrMRQrhEqXhmR7OhWD
 4YrAlgV6FEBTlacfKKsxaL7MJ3VK+h5YLvqoGzZS2Inmrx09v6rOofVTRevmB4Qz
 SlIeUKVBijORmRi31I/WcLdiPgd3RR53wQgAugU3PUpuoUb1Z+sJdOreOkl5qGyZ
 8aRgvG/if8afILXfH/a4IUuPboaVjaC5B20JCzX4M4ks8lHJ3atbtawgj/e41yYv
 Ybq3QudM62g4SvTgJ5/1yqjQ4Oj8dkAY7JyAiXfHa9Kip7s16aBDFklDH7eR9v7F
 IxyoYcFhuPADE7ApdWtij/y/KRS66Q==
 =oVPG
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20191126' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Solve warning for stih410-b2260
- Device tree alignment on v5.4-rc4 for all stm32 boards
- Correct the eMMC pin configuration on stm32mp157c-ev1
- Add DFU and SPI-NAND support for stm32mp1 board
2019-11-28 07:33:16 -05:00
Tom Rini
4b39568cfd Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- powerpc: Fix DM_MMC related build warnings by adding eSDHC device
  module support for T4240RDB, T2080RDB, T1042D4RDB, T1024RDB, P5040DS,
  P4080DS, P3041DS, P2041RDB, P2020RDB, P1020RDB platforms
2019-11-28 07:32:44 -05:00
Alex Marginean
201d8a5cee configs: ls1028a: enable OF_LIBFDT_OVERLAY
LS1028A QDS board supports multiple combinations of SerDes protocols and
multiple add-on cards with Ethernet PHYs.  Some of them require specific
configuration in Linux DT, and the plan is to use DT overlays for them.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27 13:12:19 +05:30
Patrick Delaunay
b4fee16108 stm32mp1: add support for virtual partition read
Add read for OTP and PMIC NVM with alternates
on virtual DFU device.

Serie-cc: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26 10:14:35 +01:00
Patrick Delaunay
0df4b94207 stm32mp1: configs: activate CONFIG_MTD_SPI_NAND
Activate the support of SPI NAND in stm32mp1 U-Boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26 10:14:35 +01:00
Patrick Delaunay
4edce505f1 stm32mp1: activate DFU support and command MTD
Add support of DFU for MMC, MTD, RAM and MTD command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26 10:13:45 +01:00
Patrice Chotard
5c347f3398 configs: stih410-b2260: Enable DM_ETH flag
This patch allows to fix the following compilation warning:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26 10:11:18 +01:00
Tom Rini
4b19b89ca4 - add RPi4 upstream compatible to pinctrl
- fix boot banner on RPi3/4
 - add support for one binary on RPi3/4
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl3a8R4SHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+AfQP/iO4qiJWUsY1WgChKl0wZNnkJKViNu6v
 F7zczCIUyI7krdVb3E3PB/ZJwXY/ay1rQeY91cU/9f0Z3yOlsoiwnEfOT/HwwkmD
 KnS6nhisqL0W1yd8sK8XaLOydIFfe05Do1UvF1JhOl3061R81fdruXygkHlgFXiK
 /hrEXLb9l0Zf4XMSD9hQJZiC/K3qeUZV1KsEdSGArjjTj3kivvS++Z0XD1YZsBVs
 rsEl3ZhPeUmzAxmg26IfyJan02NjWY+MyuoSd8QW5kVGsF4WOgvDuBOY1YJ08C/7
 NhLGkub/XhqHVSaMDwiSoX9d2z7ZqTaw7+IZW38+fCMUFAEHiErqMDq+Zfk1DKCd
 WynOzMj6k+Kli+amHQMHuUqIY54XPwpXdn671C7XbQ8xWh7HhWH/sEHP7ekrSV74
 Et7dy5fcleCcrr8EDhdC5iO2fLKhswq4iT0PbnFMtha4jhPqFVHVaAZDacucJ1/V
 JpfYRkLrmEbva3G1emve80tzlDNDxjraX8G6/6trN+F0xjorcbImp64RtRjgdL62
 DwIuba15BGR18LQJY/yHSHT4h3ReEG5qF9vxX+r6vMiFACZbnBPAP/b/REDQ6LWs
 dwW01JQ343dmZiegBQOe98fRDMGhmTd52mAJ/8p60X+byIh5I4XFKCdEdUpSVBpK
 ARrdtg9vtLxv
 =4Z+A
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2020.01' of https://github.com/mbgg/u-boot

- add RPi4 upstream compatible to pinctrl
- fix boot banner on RPi3/4
- add support for one binary on RPi3/4
2019-11-25 12:56:27 -05:00
Heinrich Schuchardt
dbcbdad92c sandbox: enable USB_KEYBOARD_FN_KEYS
Enable the support of function keys on the USB keyboard. This is necessary
to test the USB keyboard driver.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-25 13:28:53 +01:00
Yinbo Zhu
3fca56ee42 configs: enable eSDHC device module for T4240RDB board
Enable eSDHC device module for T4240RDB board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:28 +05:30
Yinbo Zhu
356152fd94 configs: enable eSDHC device module for T2080RDB board
Enable eSDHC device module for T2080RDB board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:28 +05:30
Yinbo Zhu
830e46528e configs: enable eSDHC device module for T1042D4RDB board
Enable eSDHC device module for T1042D4RDB board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:28 +05:30
Yinbo Zhu
26532cab65 configs: enable eSDHC device module for T1024RDB board
Enable eSDHC device module for T1024RDB board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:28 +05:30
Yinbo Zhu
9eb7ed194d configs: enable eSDHC device module for P5040DS board
Enable eSDHC device module for P5040DS board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:28 +05:30
Yinbo Zhu
6a41f77e24 configs: enable eSDHC device module for P4080DS board
Enable eSDHC device module for P4080DS board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:27 +05:30
Yinbo Zhu
2e83e80094 configs: enable eSDHC device module for P3041DS board
Enable eSDHC device module for P3041DS board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:27 +05:30
Yinbo Zhu
83309ef3d8 configs: enable eSDHC device module for P2041RDB board
Enable eSDHC device module for P2041RDB board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:27 +05:30
Yinbo Zhu
02504ef07e configs: enable eSDHC device module for P2020RDB board
Enable eSDHC device module for P2020RDB board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:27 +05:30
Yinbo Zhu
20186d071e configs: enable eSDHC device module for P1020RDB board
Enable eSDHC device module for P1020RDB board

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 11:54:27 +05:30
Matthias Brugger
5694090670 ARM: defconfig: add unified config for RPi3 and RPi4
Provide a defconfig which allows us to boot Raspberrry Pi 4
and Raspberry Pi 3 Model B/B+
Instead of using the embedded DTB as done in RPi3 we use the
devicetree provided by the firmware.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-24 10:46:28 +01:00
Tom Rini
9a0cbae22a Merge tag 'u-boot-rockchip-20191124' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Clean vid/pid in Kconfig and add fastboot for rk3399
- add 'u-boot, spl-fifo-mode' for mmc
- Use FIT generator for rk3229 optee and rk3368 ATF
- fan53555: add support for Silergy SYR82X and SYR83X
2019-11-23 20:50:11 -05:00
Jagan Teki
d4fba131bb rock960: Enable USB Gadget
Enable DWC3 core, gadget for rock960 board.

This would help to use fastboot by default.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 23:41:44 +08:00
Tom Rini
601c2879f8 Pull request for UEFI sub-system for efi-2020-01-rc4 (2)
Use CONFIG_EFI_LOADER=n for ARM11 except for the Raspberry Pi and the
 Raspberry Pi Zero.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl3ZPGAACgkQxIHbvCwF
 GsQLxQ/9H4Q/IJE/3beMEn3R5tpiibiflH9Q7DucuQwnHQGaMKkTOSpumK6bIebI
 hCXtCQhChdoogq2W69P/+A98nnp8NbEQ7zQuzjEsn4w74IDoeOEPeGatnpJjRdL9
 3I2b75zPw9w5JYkvEe472nOlX5UWGdzDJ/WtVc7trECr6fmd6MNbEWQv9UpVSbAD
 9fXV3bPA5vFA40VJ16hG5TFbU5D8oSVZ5m+tnpBDsWAdcKf8pZPbICFyczvYWnu9
 HeoZT+HXR/+lcEkO/7v1tZ/PAlnc7sbquzYXOWG0xcQBAqWRRub/dNdV7SN2GVT6
 i2nhNb1Di69QAOWh5V9obqHzdDvlCVCBFjwOr705x+VnRaP+udeNVagT9PcwtrAY
 CzIr7nGqob3b14NYhCDr3EMyKrRogg+0WbnoZHiwCib2vrwwoaEY9c0Yw7GpbLwh
 zk/ysUg8MeHxNhLayBZJJauxbdp2Afe7GTaQDVnxmy3tzfOUnpWW/D9An0EIlXWi
 99h+zPj4RV0v7RzDCDFouX7tq17QgeImulgQI4/HEBhZxwxHEAikGiIJNOmykQo8
 1GQvd4s/zQ0qcI7CKciAyx+mUijLsNBVh8BaeRz+BV6sST16/K81/G4xQMjOg9m5
 OQHiI98j9Wsog8CQJ6d/sldtLCDJa8UIANpLtIOMFNz++BAM2rc=
 =zDGP
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-01-rc4-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-01-rc4 (2)

Use CONFIG_EFI_LOADER=n for ARM11 except for the Raspberry Pi and the
Raspberry Pi Zero.
2019-11-23 10:20:18 -05:00
Jagan Teki
a9af59a30a fastboot: rockchip: Select FASTBOOT_FLASH[_MMC_DEV]
Select CONFIG_FASTBOOT_FLASH, CONFIG_FASTBOOT_FLASH_MMC_DEV
for rockchip SoC plaforms in fastboot Kconfig file instead
of defined it in board defconfig.

This eventually drop the explicit configs defined in
supporting board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
132b012ede gadget: rockchip: USB_GADGET_PRODUCT_NUM
Rockchip support differnet or common gadget product number
between Rockchip SoCs like,

0x310a - rk3036
0x320a - rk3229, rk3288
0x330a - rk3328

So, select them on Kconfig based on platform specific
config defined.
   
This eventually drop the explicit configs defined in
supporting board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
89cbceb388 gadget: Select USB_GADGET_VENDOR_NUM for rockchip
Gadget vendor number, 0x2207 is common across all platfroms
supported in Rockchip SoC.

So, select the same number globally, if ARCH_ROCKCHIP.

This eventually drop the explicit configs defined in supported
board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Jagan Teki
89e311d494 gadget: Select USB_GADGET_MANUFACTURER for rockchip
Select the gadget manufacturer as 'Rockchip' for
all rockchip platform SoC's.

This eventually drop the explicit defined added
on supported board defconfig files.

Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Kever Yang
5561a9a229 rockchip: lion-rk3368: Migrate to use common FIT generator
The RK3368 lion board ATF can use bl31.elf like RK3399 and get the FIT
source with generic FIT generator script at:
arch/arm/mach-rockchip/make_fit_atf.py

And then we can use 'BL31' environment to get the path of bl31.elf
instead of copy it into U-Boot folder.

CC: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Kever Yang
65325fba5a rockchip: Convert to use FIT generator for optee
Use generator script so that we can use environment for TEE source.
$TEE for tee.bin, and if file not exist, the script can report a warning,
and meke the build success without a error.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23 22:29:49 +08:00
Heinrich Schuchardt
b7cdecfc19 efi_loader: default EFI_LOADER=n on ARM11
Some of the ARM11 boards have tight limits on the size of U-Boots. Hence
use EFI_LOADER=n as default on ARM11.

Set EFI_LOADER=y for the Raspberry Pi and Raspberry Pi Zero as these boards
have sufficient storage on the SD card.

Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-23 09:19:31 +01:00
Tom Rini
47b48fe186 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Assorted fixes
2019-11-22 10:41:46 -05:00
Tom Rini
71d96eb99e Merge branch 'master' of git://git.denx.de/u-boot-sh
- Assorted Gen3 fixes
2019-11-22 10:24:14 -05:00
Tom Rini
32a238df79 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-21 08:30:45 -05:00
Tom Rini
a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00
Marek Vasut
48f23dd6a4 ARM: socfpga: Fix default mtdparts
The default mtdparts value grew a trailing zero during the Kconfig
conversion. This is because the mtdparts value in the header file
had a \0 at the end, which got misconverted into plain 0 instead of
being dropped.

Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: 43ede0bca7 ("Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT")
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-20 23:46:16 +01:00
Ley Foon Tan
086269e17d configs: Stratix10: Disable CONFIG_SPL_USE_TINY_PRINTF
Commit 2a51e16bd5 ("configs: Make USE_TINY_PRINTF depend on SPL||TPL and be default")
enable USE_TINY_PRINTF by default, disable it for Stratix10.

Resync with savedefconfig.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20 22:32:00 +01:00
Tom Rini
8d8ee47e03 env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not.  In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-20 12:24:50 -05:00
Michael Trimarchi
59b01eb7a1 rockchip: dts: tinker: Add tinker-s board support
Support tinker-s board. The board is equivalent of tinker board
except of emmc.

TODO:
- support of usb current burst when the board is powered from pc

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 18:51:25 +08:00
Andy Yan
208b8cd646 rockchip: rk3308: Add support for ROC-RK3308-CC board
ROC-RK3308-CC is a rk3308 based board designed by
Firelfy, with eMMC and 256MB DDR3 and RTL8188 Wifi
on board.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Andy Yan
9e3de722e4 board: rockchip: Add rk3308 evb support
Add support for rk3308 evaluation board.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Vasily Khoruzhick
de43ca7e3e rockchip: rk3399: split rockpro64 out of evb_rk3399
rockpro64 needs to setup I/O domains in order for USB to work in u-boot.
Since we currently don't have a driver to do that, split it into its own
board file and initialize I/O domains here.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Peter Robinson
16359c58e8 rockchip: rk3399: rock960: Update config for TPL
Enable TPL for rock960 like other rk3399 boards.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Jagan Teki
c0828a0156 configs: Rename roc-rk3399-pc -> roc-pc-rk3399 defconfig
roc-rk3399-pc_defconfig is committed in below

commit <8a681f4c5aa15db51ad0209734859c9fe7c29cfd> ("rockchip: rk3399:
Add ROC-RK3399-PC support")

which doesn't follow the existing defconfigs on rk3399.

So, rename as followed with other rk3399 defconfigs.

Cc: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Heiko Stuebner
deebba82d9 rockchip: add px30-evb board
The px30 evb is an evaluation board for the px30 together with a dsi-
connected display. This adds board and config files for it.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:23:26 +08:00
YouMin Chen
ca93e32139 ram: rk3328: use common sdram driver
RK3328 has a similar controller and phy with PX30, so we can use the
common driver for it and remove the duplicate codes.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 16:23:56 +08:00
Marek Vasut
6da56a11f7 ARM: rmobile: Enable CONFIG_ARCH_FIXUP_FDT_MEMORY on Gen3
Enable CONFIG_ARCH_FIXUP_FDT_MEMORY to let U-Boot patch the
Linux DT memory entries.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-11-15 10:31:54 +01:00
Tom Rini
cb6617a77f defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT
Move this symbol to Kconfig.  As part of this we can drop a UBI-specific
symbol that was a stop-gap for not having this particular symbol in
Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12 11:08:00 -05:00
Tom Rini
38d5fa48f4 pfla02: Migrate CONFIG_ENV_IS_IN_SPI_FLASH to defconfig
This board is setting CONFIG_ENV_IS_IN_SPI_FLASH in the header rather
than defconfig, fix.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12 11:08:00 -05:00
Tom Rini
ba0afaee85 evb-rk3128: Migrate CONFIG_ENV_IS_IN_MMC to defconfig
This board is setting CONFIG_ENV_IS_IN_MMC in the header rather than
defconfig, fix.

Cc: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12 11:08:00 -05:00
Tom Rini
5f7ff6d63e u-boot-imx-20191105
-------------------
 i.MX8MN SoC support
 ROM API image download support
 i.MX8MM enet enabling
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl3BmLkPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3oVwL/2Z7kCMCjudXNjXqJFSVsCizuzaxkYvUDQCK
 g8+P7pdci/xZz8pVvVD5zmpZGRM2hu+7hFQwIlSu7anlRqdW+9cZCAJoeq/4A29c
 TkI3w99R0xTDGFlip0zM4vKlQXmC0I0LYbJPVDLjN+zNkhL6QNS3QptONw/3xPzr
 Vj5+eztasl5JOnkTFE8yZkfbkekgPbO4h43oje5XwRdRQcwzo4qEFZcxZzvucz39
 0RXyvu5qtXvSeVYApXeYcnBD3Mn4rjq26rfn2EEntkO0FbhYBHBjwx3/ozmUaOFR
 7AtNyZZSAZFe03egfX6+ODx7tuOTA0PK1LLdogMjLDrOd70px+P7wxY9QZV6hKw9
 TC4YlboZK2bjsPyOwIraTWVUvU9YjQzlPT0SYjyIono33Av1Um7RDvp+XeyG7VPC
 AYE6luZwhauYNUaGegFPexDxOSRqeAiTLx3kOOeHb4Vb4KkJu4Np7Pma2uiqI00V
 4TpWJwhqQPn7lo/N1X9ymBx6iNvt2Q==
 =sgCz
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191105' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191105
-------------------
i.MX8MN SoC support
ROM API image download support
i.MX8MM enet enabling
2019-11-12 07:18:23 -05:00
Tom Rini
59e5d1e2a5 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-11 20:04:24 -05:00
Tom Rini
086e391bc4 Merge tag 'u-boot-rockchip-20191110' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add support for rockchip pmic rk805,rk809, rk816, rk817
- Add rk3399 board Leez support
- Fix bug in rk3328 ram driver
- Adapt SPL to support ATF bl31 with entry at 0x40000
- Fix the u8 type comparision with '-1'.
- Fix checkpatch warning for multi blank line and review signature.
2019-11-11 14:19:32 -05:00
Tom Rini
0b73ef0c02 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC.
- Few bug fixes and updates related to SPI, hwconfig, ethernet,
  fsl-layerscape, pci, icid, PSCI
2019-11-11 14:19:04 -05:00
Kever Yang
f74a089e47 rockchip: firefly-rk3288: Enable TPL support
This patch enable TPL support for firefly-rk3288 board, which works ths
same way with other RK3288 board like Tinker, evb.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Kever Yang
006ab58d46 rockchip: rk3399: update SPL_STACK_R_ADDR
Use the same SPL_STACK_R_ADDR in Kconfig instead of each board config;
default to 0x4000000(64MB) instead of 0x80000(512KB) for this address
can support all the SoCs including those may have only 64MB memory, and
also reserve enough space for atf, kernel(in falcon mode) loading.

After the ATF entry move to 0x40000, the stack from 0x80000 may be override
when loading ATF bl31.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Kever Yang
4b294886d0 rockchip: evb-px5: defconfig: no need to reserve IRAM for SPL
We use to reserve IRAM to avoid the SPL text overlap with ATF M0 code,
and when we introduce the TPL, the SPL space is in DRAM, we reserve
space to avoid SPL text overlap with ATF bl31.

Now we decide to move ATF entry point to 0x40000 instead of 0x1000,
so that the SPL can have 0x4000 as code size and no need to reserve
space or relocate before loading ATF.

The mainline ATF has update since:
0aad563c rockchip: Update BL31_BASE to 0x40000

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Kever Yang
ae2500f89a rockchip: rk3328: defconfig: no need to reserve IRAM for SPL
We use to reserve IRAM to avoid the SPL text overlap with ATF M0 code,
and when we introduce the TPL, the SPL space is in DRAM, we reserve
space to avoid SPL text overlap with ATF bl31.

Now we decide to move ATF entry point to 0x40000 instead of 0x1000,
so that the SPL can have 0x4000 as code size and no need to reserve
space or relocate before loading ATF.

The mainline ATF has update since:
0aad563c rockchip: Update BL31_BASE to 0x40000

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Kever Yang
5ce94c74a6 rockchip: rk3399: defconfig: no need to reserve IRAM for SPL
We use to reserve IRAM to avoid the SPL text overlap with ATF M0 code,
and when we introduce the TPL, the SPL space is in DRAM, we reserve
space to avoid SPL text overlap with ATF bl31.

Now we decide to move ATF entry point to 0x40000 instead of 0x1000,
so that the SPL can have 0x4000 as code size and no need to reserve
space or relocate before loading ATF.

The mainline ATF has update since:
0aad563c rockchip: Update BL31_BASE to 0x40000

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Andy Yan
a4bbc662fc rockchip: rk3399: Add Leez P710 support
Specification
- Rockchip RK3399
- LPDDR4
- TF sd scard slot
- eMMC
- M.2 B-Key for 4G LTE
- AP6256 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- TYPE-C Power supply

Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1:
"arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
(sha1: 	fc702ed49a8668a17343811ee28214d845bfc5e6)

Signed-off-by: Andy Yan <andyshrk@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Tom Rini
ee1c499851 Merge branch '2019-11-07-master-imports'
- Add Phytium Durian Board
- Assorted bugfixes
- Allow for  make ERR_PTR/PTR_ERR architecture specific
2019-11-08 07:27:45 -05:00
Udit Agarwal
bef1845404 freescale/powerpc: Rename the config CONFIG_SECURE_BOOT name
Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid
conflicts with UEFI secure boot.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 16:32:08 +05:30
Udit Agarwal
5536c3c9d0 freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name
Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict
with UEFI secure boot.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 16:32:08 +05:30
Andrew F. Davis
72077fe160 configs: j721e_evm_r5_defconfig: Remove SPL multi-DTB FIT support
The SPL FIT will only have one DTB, so remove support for multi-DTB. This
also removes an early access to EEPROM used to select the DTB that is not
valid in SPL at the point at which it is accessed, that always returns
false for GP devices and causes a firewall expection on HS.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-07 18:39:18 -05:00
Adam Ford
5d44207d17 configs: omap3_logic_somlv: Remove GPIO from SPL
The SPL is too tight, and it cannot start any longer.  To
help reduce the size of SPL, we need to remove some non-critical
features.

This patch removes SPL_GPIO_SUPPORT to free up some operating space.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-11-07 18:39:18 -05:00
Adam Ford
88279e1b0f Revert "ARM: omap3_logic/omap35_logic: Enable GPIO in SPL"
The SPL is too tight, and it cannot start any longer.  To
help reduce the size of SPL, we need to remove some non-critical
features.

This reverts commit 66063a7c13.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-11-07 18:39:18 -05:00
Keerthy
14dfca69d7 configs: j721e_evm_r5_defconfig: Enable AVS Class 0 & dependent configs
Enable AVS Class 0 & dependent config options.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Tero Kristo
b31e650867 configs: am65x_evm_r5_defconfig: Enable AVS class 0 support
Enable AVS class 0 support for the R5 SPL bootloader.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Tero Kristo
e41dd6c499 configs: am65x_evm_r5_defconfig: Enable TPS62363 regulator support
TPS62363 is used to control the MPU_VDD voltage, so enable the driver
for this.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
liu hao
e3aafef4cf arm: add initial support for the Phytium Durian Board
This adds platform code and the device tree for the Phytium Durian Board.
The initial support comprises the UART and the PCIE.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07 18:01:13 -05:00
Tom Rini
0be2ecd486 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07 17:58:06 -05:00
Heiko Schocher
2a51fe01be mpc85xx, socrates: add DM PCI support
add DM PCI support on the socrates board.
use PCIE_FSL now.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
98beb60a2a mpc85xx, socrates: enable DM serial
switch to DM_SERIAL support.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
92746bac88 mpc85xx, socrates: enable DM I2C
enable DM I2C support for the socrates board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
4c65a449ae mpc85xx, socrates: disable VIDEO
disable video, as not really needed longer.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
a9c909d9e0 mpc85xx, socrates: get rid of DM_USB warning
add some defines and get rid of USB warning.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Heiko Schocher
39642abf56 mpc85xx, socrates: add DM support
enable CONFIG_DM for the socrates board.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Peng Fan
bdcf3a88cc imx: imx8mm-evk: enable ethernet
add phy-reset-gpios to reset phy
Add board_phy_config to configure phy
Enable DM_ETH

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
d239d9d946 imx: add i.MX8MN DDR4 board support
Support pinctrl/clk/sdhc, include ddr4 timing data.

Log:
U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)
Normal Boot
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)

CPU:   Freescale i.MX8MNano rev1.0 at 24 MHz
Reset cause: POR
Model: NXP i.MX8MNano DDR4 EVK board
DRAM:  2 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
84abc8d533 imx8qm: mek: enable dm-spl for pm
with u-boot,dm-spl added for imx8qm-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Simon Glass
e9bae5c534 mx6: tbs2910: Minimise libfdt code size
This board appears to be very near its size limit and cannot accept the
new checking code in libfdt. Disable this code so this the board can
continue to build.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-04 18:15:32 -07:00
Tom Rini
73b6e6ad25 u-boot-imx-20191104
-------------------
 
 - i.MX NAND: nandbcb support for MX6UL / i.MX7
 - i.MX8: support for HAB
 - Convert to DM (opos6ul, mccmon6)
 - Toradex i.MX6ull colibri
 - sync DTS with kernel
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2/6YYPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3qSAL/37iSxotpJEcvCcAg0x96n6na/O0SjT3NkoT
 glPaFXLkzR7hbK5yR3g2P0LuNGRGkCQbuz61Hn4wNLRySVodvIJ1pUITu9GaLnex
 graG/ssqdPMEWU0LDoatr/fgoCQo7DEKOuzRmvHAYus7LZJ6edctOyTXuiMhPZ+T
 DJ51RAUq11CleuA8nnz/iV2WCR8pw9sPS7P016lrDF+sWLIqm+/UMnwiIUV4KVhI
 og/fevJfE52vOdV1the6xgpffQGICckNUFREgXaPo3JsP67icPiUGQ4RiFhHp+ff
 rNyMdD/g6YZOoMoWda989h0l3gBwKjBQ9eGG05V8GEmyxzzkOGa5So2O9NzG90CQ
 vcOlEsC/siNZ87B5VkVkWjmrEnHcICtAFJSSntC7pLxtQMMqMbioRe5w+zmSrWeH
 GYh9cxe3ABLYBxISrT6BTfyXs0cD5tMl6D9snLaGyUzHcH2AGkVTkVabemuMSpIZ
 kBzNRFmx3+3Ync+CoaLA+G1YRXmgSw==
 =zlN+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191104' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191104
-------------------

- i.MX NAND: nandbcb support for MX6UL / i.MX7
- i.MX8: support for HAB
- Convert to DM (opos6ul, mccmon6)
- Toradex i.MX6ull colibri
- sync DTS with kernel

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04 12:57:41 -05:00
Tom Rini
9c17ad33fe tbs2910: Disable Plan9/RTEMS bootm support
We have once again reached a point where this board does not build in
some cases with supported toolchains due to reaching a size constraint.
To regain some space, disable support for Plan 9 / RTEMS images with the
bootm command.

Acked-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-03 19:28:37 -05:00
Tom Rini
b947dd8fc6 tbs2910: Disable Plan9/RTEMS bootm support
We have once again reached a point where this board does not build in
some cases with supported toolchains due to reaching a size constraint.
To regain some space, disable support for Plan 9 / RTEMS images with the
bootm command.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2019-11-03 21:18:00 +01:00
Oliver Graute
eef72440db imx: support i.MX8QM ROM 7720 a1 board
Add i.MX8QM ROM 7720a1 board support

Boot log as below:
U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Advantech iMX8QM Qseven series
Board: ROM-7720-A1 4GB
Build: SCFW 65afe5f6
Boot:  SD2
DRAM:  4 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1
, eth-1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03 21:18:00 +01:00
Hannes Schmelzer
c04ac5bd40 board/BuR/brppt2: initial commit
This commit adds support for the brppt2 board. The board is based on the
i.mx6 dual-lite SoC.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03 21:17:55 +01:00
Peng Fan
8c61eba03d imx8mm: evk: enable bd71837 pmic
Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for
DRAM and linux suspend voltage requirement.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
b1be79b417 opos6uldev: migrate to DM_VIDEO
Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
b72dd938ec imx6ul: opos6ul: migrate to DM_ETH
Migrate to DM_ETH and remove code that is no longer necessary.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03 17:04:16 +01:00
Patrick Wildt
05737f3585 imx: update i.MX8MQ device trees
This updates the i.MX8MQ device trees and, necessarily, also the
i.MX8MQ clock bindings.  These are taken verbatim from from the
Linux kernel version v5.4-rc2, which three small changes which
were already part of the previous device tree:

 * Keep the PSCI reserved memory range
 * Keep the alias for ethernet, so that the MAC address can be set
 * Keep the modified #include for the IOMUXC pins

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
c4cb27e59f mccmon6: defconfig: nor: Enable usage of *_TINY_* drivers in SPL
After this change the SPL size has been reduced from 38K to 34K.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
e4417ed03e ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTB
This commit enabled support for fitImage on mccmon6 when we
switch to DT/DTS (including falcon mode).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
8e64181a99 ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot proper
This commit converts mccmon6's u-boot proper (in a single commit to avoid
build breaks) to use solely DM/DTS.

The DTS description of the mccmon6 has been ported from Linux kernel
(v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
f6a4df3846 imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 board
The TPC70 is equipped with DS1307 RTC device. Add code to enable support
for it.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Claudius Heine
cd71c7597a ARM: imx6: DHCOM i.MX6 PDK: defconfig: Enable MMC support of SPL
Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
3201e5b444 imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT on display5
After the following commit:
commit 772b55723b ("imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC
boot on falcon mode")
it is possible to set the CONFIG_SPL_FORCE_MMC_BOOT flag, which allows
using MMC device as boot device regardless of the device used by Boot ROM
(FBL) as the first boot medium.

Display5 board needs this flag set to allow falcon boot from eMMC device.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Eugeniy Paltsev
43f3031313 ARC: [plat-axs101]: migrate to DM_MMC
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-11-01 16:45:40 +03:00
Alexey Brodkin
0da32633ab arc: emsdp/iotdk: Switch to DM_MMC
Somehow EMSDP & IoT DK boards were skipped on ARC boads conversion
to DM MMC. So doing it now.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-11-01 16:45:40 +03:00
Alexey Brodkin
9f353ad88a arc: emsdp: Increase max FAT cluster size
Some especially large SD-cards come from stock formatted with
larger FAT cluster size so to accommodate those we just increase
what we expect to have here in U-Boot given we have a plenty of
space on EM SDP (16 MiB).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-11-01 16:45:39 +03:00
Tom Rini
cc64810dc6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- H6 dts(i) sync (Clément)
- H6 PIO (Icenowy)
- Fix pll1 clock calculation (Stefan)
- H6 dram, half DQ (Jernej)
- A64 OLinuXino eMMC (Sunil)
2019-10-30 09:04:52 -04:00
Tom Rini
ffc379b42c - bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs
- bmips: various small fixes
 - mtmips: add new drivers for clock, reset-controller and pinctrl
 - mtmips: add support for high speed UART
 - mtmips: update/enhance drivers for SPI and ethernet
 - mtmips: add support for MMC
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl2zFisACgkQKPlOlyTy
 XBgf9RAAkNwLjqUcBz3Ob1briRG5HF4D6bZCpjtkTIO8a2fanUHbSehh30TX8x2X
 z0t/9Sd4OZwAeTxfQ/AlbbVdiB9IMgEb6lJ30Vr88MRNoPhABIQ8hw5xAzFi/6x9
 88YolS/HQo6iR9rzSlaKjdIHhPTH5oQzRJ3JLqSwZzfUNy+zqINEhs3SYCnD2lyV
 gTgiIT3Y5nKrhVHPUCy+jQG+wwWej2NFgwn71vR3/PSQJwxBuasg0qqOKD9hRtpC
 XL6VErE7bf00elO8xjEObYrmB2FpffXJdkazS2HtRYNyKx0quaRNXJt7wqxEVP9L
 M6SmL+S7zBFAetc/iyrlaakPvn7ImehSZkgLYaTPc3yzO+6bgq9tLfBERn/B/s5g
 YyIzPGF66L96nuu0eVGCgSoUBjzBE8l2QTI8dho5xJxjWAUJOWSB0egqfFZzYVFu
 4X37w6Z0j6uTK2oEl7KgJdc0JsZRsAJ8ZiqgOeNeMUTl2RnjGt0Oa7E24Va3n3hM
 5vuEba9nPUFmdC5vlSd2RUK/dB587uKV93r5j54U62clpbiK+VMaRuRVX64ytZvB
 B/0fKyCu+y7bxeZe4/X27jBUOk5yCuxbNI66m+cnnvfHqEmhz5PfDCEK1Dr29oqf
 sCJLgTr7ahyuW4kEoL7KCOBEugPI85fp8/OlqC63M6/Kft0w5sA=
 =6G/J
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-10-25' of git://git.denx.de/u-boot-mips

- bmips: add BCRM NAND support for BCM6368, BCM6328, BCM6362 and BCM63268 SoCs
- bmips: various small fixes
- mtmips: add new drivers for clock, reset-controller and pinctrl
- mtmips: add support for high speed UART
- mtmips: update/enhance drivers for SPI and ethernet
- mtmips: add support for MMC
2019-10-25 20:07:24 -04:00
Tom Rini
15147dc6a9 Merge branch '2019-10-24-ti-imports'
- Enable DFU on dra7xx boards
- Further Keystone 3 platform improvements
2019-10-25 17:33:28 -04:00
Faiz Abbas
18df182b63 configs: dra7xx_evm: Increase the size of SPL_MULTI_DTB_FIT
Expand SPL_MULTI_DTB_FIT to accommodate usb peripheral nodes being
added to support SPL_DFU bootmode.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-25 17:33:21 -04:00
Faiz Abbas
add2242c49 configs: dra7xx_evm: Add Kconfigs for SPL_DFU bootmode
Enable configs for supporting SPL_DFU bootmode.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-25 17:33:21 -04:00
Tom Rini
271103ac0b Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 improvements
- i.MX7 EHCI bugfix
2019-10-25 13:50:51 -04:00
Tom Rini
c9e50bb12a Second set of u-boot-atmel features and fixes for 2020.01 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdspnqAAoJEB6zHgIOrC/Ixi4IAJEEiCZPu6Z3fbkFX/Um7vCX
 eMTltJN8nz4oiSi3xdx3ejueqWdW3F8VuCkHb0j0bVAhMlUlVgwCzfd0cD+D2iwS
 jkrgzASNAr+JeYKYEdWqqfaUxOCd2qfuBu9EXlpvKQLWLt+KRfsOsHWcgR4bf095
 aGCihvd/fKhKYUvbf5cEQnsWa3UwtsKk4Web5MKjxXx3p0iVNlu4KLd/vDWfTios
 X1NqiO5ZjXNrDxyG6Aj8lgDXlE5kfeKaN/aCJU1/0U2cXm8JRu2w2dv1P/e/kU+j
 NHIGzICAG4Lk/4gQTeuohJxLyvj7K3i1H12ik9Qeh4H1/5fsyybyltGUo7H443s=
 =JYe3
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2020.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2020.01 cycle

This feature set includes Eugen's work on a new tiny flexcom driver and
eeprom mac retrieval for the sam9x60-ek board.
2019-10-25 13:50:33 -04:00
Tom Rini
e382713d22 Xilinx/FPGA changes for v2020.01 part 2
common:
 - Fix manual relocation for repeatable commands
 
 arm:
 - Also clean up generated dtbos
 
 microblaze:
 - Add support for Manual relocation in crypto framework
 - Tune and align architecture bootm support
 
 zynq:
 - DT sync ups
 - Some defconfig updates
 - Remove empty board_early_init_f()
 
 zynqmp:
 - Clean firmware handing via drivers/firmware/
 - DT/defconfig name alignments
 - DT cleanups with using firmware based clock driver
 - Some defconfig updates
 - Add IIO ina226 DT description
 - Tune zynqmp_psu_init_minimalize.sh script
 - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216
 
 versal:
 - Clean firmware handing via drivers/firmware/
 - Add gpio support
 - Enable DT overlay/USB/CLK/FPGA
 - DT updates
 - Tune mini configuration
 
 spi:
 - gqspi - Remove unused headers
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXbKa4QAKCRDKSWXLKUoM
 ISzJAJ0YpGS7HziGFVRBlcsyRH8QlWCqOQCfb0jIWzhL8pvj9TA01CdU0Axdbwk=
 =GIpp
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.01-part2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01 part 2

common:
- Fix manual relocation for repeatable commands

arm:
- Also clean up generated dtbos

microblaze:
- Add support for Manual relocation in crypto framework
- Tune and align architecture bootm support

zynq:
- DT sync ups
- Some defconfig updates
- Remove empty board_early_init_f()

zynqmp:
- Clean firmware handing via drivers/firmware/
- DT/defconfig name alignments
- DT cleanups with using firmware based clock driver
- Some defconfig updates
- Add IIO ina226 DT description
- Tune zynqmp_psu_init_minimalize.sh script
- Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216

versal:
- Clean firmware handing via drivers/firmware/
- Add gpio support
- Enable DT overlay/USB/CLK/FPGA
- DT updates
- Tune mini configuration

spi:
- gqspi - Remove unused headers
2019-10-25 11:23:46 -04:00
Weijie Gao
ec54c8c000 configs: mtmips: remove configs which are selected in Kconfig or useless
Some configs are selected in Kconfig and is no longer needed in the
defconfig files. Some configs (power domain, ram) are never used.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Álvaro Fernández Rojas
331bee8786 bmips: enable vr-3032u nand support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Sunil Mohan Adapa
4ed293ae79 arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In
addition, there are two variants without eMMC. One without eMMC and one with SPI
flash. This suggests the need for separate device tree for the three eMMC
variants.

The Linux kernel upstream has chosen to create and use a separate device tree
for the eMMC variants instead of adding eMMC support existing device tree. These
changes to Linux kernel are queued for Linux 5.4.

commit <02bb66b347ff8115f53948f86b884e008ba385b9> ("arm64: dts:
allwinner: a64: Add A64 OlinuXino board (with eMMC)")

This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux
device-tree and a64-olinuxino_defconfig.

Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
[jagan: updated linux-next commit details]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 14:15:49 +05:30
Frieder Schrempf
832ce20278 mtd: spi: Clean up usage of CONFIG_SPI_FLASH_MTD
Most boards currently use SPI_FLASH_MTD only in U-Boot proper, not in
SPL. They often rely on hacks in the board header files to include
this option conditionally. To be able to fix this, we previously
introduced a separate option SPL_SPI_FLASH_MTD.

Therefore we can now adjust the Makefile and change the code in
sf_probe.c and sf_internal.h to use CONFIG_IS_ENABLED(SPI_FLASH_MTD).

We also need to move all occurences of CONFIG_SPI_FLASH_MTD from the
header files to the according defconfigs. The affected boards are
socfpga, aristainetos, cm_fx6, display5, ventana, rcar-gen2, dh_imx6
and da850evm.

We do this all in one patch to guarantee bisectibility.

This change was tested with buildman to make sure it does not
introduce any regressions by comparing the resulting binary sizes.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:32 +05:30
Frieder Schrempf
a9ec8423a9 stm32mp1: configs: Add CONFIG_SPL_SPI_FLASH_MTD
As SPI_FLASH_MTD is used in SPL and U-Boot proper, we enable both,
now that a separate option for SPL was introduced.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
[jagan: drop unrelated change]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:32 +05:30
Jagan Teki
f8cb77ffba configs: sopine-baseboard: Enable SPI-FLASH
SoPine has winbond SPI-FLASH, so enable the same in defconfig
and add aliases for spi0 in -u-boot.dtsi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:31 +05:30
Tom Rini
17fd9915a4 Merge branch '2019-10-24-UFS-support'
- Add Universal Flash Storage (UFS) support
2019-10-24 09:51:48 -04:00
Michal Simek
6bf27ed9ae arm64: zynqmp: Add support for e-a2197-00 System Controller
Add support for System Controller available on e-a2197-00 base board.
System is very similar to p-a2197-00 board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
19096aba4f arm64: zynqmp: Enables SPI_FLASH_BAR
Enable the SPI flash Bank/Extended address register support for all ZynqMP
boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
7e856eff20 ARM: zynq: Disable fdt and evn exist for cse_qspi
Mini u-boot should be really small that's why it is necessary to disable
all unneeded configs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
3e5476c6cd ARM: zynq: Remove unused board_early_init_f()
board_early_init_f added by commit e6cc3b25d7
("arm: zynq: Wire watchdog internals") is no longer needed that's why
remove it also with Kconfig enabling.

Fixes: ccd063e981 ("watchdog: Move watchdog_dev to data section (BSS may not be cleared)")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
2ce5641df0 ARM: zynq: Dont use 4K sector size support for mini qspi configuration
This patch removes 4K sector size support for Zynq mini qspi configuration
in favour of fast erase speed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Siva Durga Prasad Paladugu
542ff688ed arm64: zynqmp: Dont use 4K sector size support for mini qspi configuration
This patch removes 4K sector size support for ZynqMP mini qspi
configuration in favour of fast erase speed.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Siva Durga Prasad Paladugu
6452fb36a4 arm64: zynqmp: Enable Micrel phy support for xilinx zc1275 revB
This patch enables Micrel phy support for Xilinx ZynqMP zc1275
revB board.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
9a133f6fae arm64: versal: Enable BDI for mini mtest configuration
bdi is useful to see how memory is mapped.
Also enable 3 memory banks to be mapped.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
dd7a3291cc arm64: zynqmp: Add support for zcu216
zcu104/6 defconfig was used as source. Standard features are enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
3d5c9060c5 arm64: zynqmp: Add support for m-a2197-03
It is based on m-a2197-01 with some changes in i2c intrastructure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
137c4aef0c arm64: zynqmp: Add support for m-a2197-02
It is based on m-a2197-01 with some changes in i2c intrastructure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
T Karthik Reddy
bf60910025 zynqmp: configs: Add single nand flash mini u-boot configuration
This patch adds configuration for single nand flash mini u-boot.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Siva Durga Prasad Paladugu
5b3b7553bf arm64: versal: Enable UHS support
This patch enables UHS support for Versal platforms.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Siva Durga Prasad Paladugu
24844d3f94 arm64: versal: Enable bit stream loading support for versal platform.
This patch enables bitstream loading support for Versal platform.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00