Commit Graph

641 Commits

Author SHA1 Message Date
Tom Rini
aa6e94deab global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Michal Simek
b40d154ced xilinx: zynqmp: Fix SPL_FS_LOAD_PAYLOAD_NAME usage
SPL_FS_LOAD_PAYLOAD_NAME depends on SPL to be enabled.
If SPL is not enabled code still expects SPL_FS_LOAD_PAYLOAD_NAME to be
present. That's why setup proper dependency in the code.
And by doing so also change the logic around dfu_alt_info string
composition to be simpler.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/3989c390a4acae13a1b05c040e14fb3d68bced02.1669986373.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Michal Simek
74673ca705 arm64: zynqmp: Do not include psu_init to U-Boot by default
The commit ed35de6170 ("Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to
Kconfig") converted CONFIG_ZYNQMP_PSU_INIT_ENABLED symbol and enabled it by
default which is not correct configuration.
Intention of this config was to have it enabled by default for SPL and
provide an option to users to also do low level initialization directly
from U-Boot.
That's why it is necessary to define second symbol with SPL marking in it
and properly use symbols depends on usage in Makefile.
Also disable ZYNQMP_PSU_INIT_ENABLED from boards which enables it by
default. CONFIG_SPL_ZYNQMP_PSU_INIT_ENABLED is enabled by default when SPL
is enabled.

Reported-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d5fcbd66b05bf0d7ef594e66464ee23b48c5e4cc.1669969083.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Luca Ceresoli
9129a6b49a board/xilinx/zynqmp/MAINTAINERS: change e-mail address for Luca Ceresoli
My Bootlin address is the preferred one now.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20221203214939.56608-1-luca@lucaceresoli.net
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-12-05 08:55:55 +01:00
Michal Simek
2e3c10eea0 xilinx: Remove unused ZYNQ_MAC_IN_EEPROM/ZYNQ_GEM_I2C_MAC_OFFSET entries
The commit ba74bcf3e0 ("xilinx: common: Remove
zynq_board_read_rom_ethaddr()") removed zynq_board_read_rom_ethaddr()
because xlnx,eeprom link via DT chosen node is no longer used. But forget
to remove Kconfig entries which are used by this code only.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/f97451ed33409838efea4071553b6da795cfc578.1669192026.git.michal.simek@amd.com
2022-12-05 08:55:55 +01:00
Michal Simek
f3538a3cbe xilinx: Add option to select SC id instead of DUT id for SC support
Reading MAC address from on board EEPROM requires different type for System
Controller (SC).

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/90bb7cc5463568a690b979f18c8d42556986b46d.1669204122.git.michal.simek@amd.com
2022-12-05 08:55:54 +01:00
Michal Simek
7ca9662d7f arm64: zynqmp: Create vck190 spl link for revB
vck190 system controller low level setup is the same for revB that's why
also create symlink to revA.

Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-22 15:02:07 +01:00
Venkatesh Yadav Abbarapu
ba74bcf3e0 xilinx: common: Remove zynq_board_read_rom_ethaddr()
Removing the zynq_board_read_rom_ethaddr() function as
xlnx,eeprom is not used anymore. As all board dts to use
nvmem alias instead of xlnx,eeprom.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20221017094818.17996-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-11-22 15:02:07 +01:00
Michal Simek
0b33770b54 xilinx: zynqmp: Load pmufw configuration before checking access
Before this patch you could see in the log:
U-Boot SPL 2022.10-rc5 (Sep 29 2022 - 15:29:27 +0200)
PMUFW:	v1.1
Loading new PMUFW cfg obj (32 bytes)
PMUFW:  No permission to change config object
Loading new PMUFW cfg obj (2032 bytes)

where it is visible that permission is check before sending PMUFW
configuration (big size).

When this patch is applied it is visible that order is correct.
U-Boot SPL 2022.10-rc5 (Sep 29 2022 - 15:47:08 +0200)
Loading new PMUFW cfg obj (2032 bytes)
PMUFW:	v1.1
Loading new PMUFW cfg obj (32 bytes)

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a0bf4f46d670023da4f848790eece6fff22090c2.1664962765.git.michal.simek@amd.com
2022-10-10 12:28:08 +02:00
Heinrich Schuchardt
872a9b81ee xilinx: common: fix board_late_init_xilinx()
Compiling with GCC-12 leads to an error:

    +board/xilinx/common/board.c:479:37: error: the comparison will always
     evaluate as 'true' for the address of 'mac_addr' will never be NULL
     [-Werror=address]
    +  479 |                                 if (!desc->mac_addr[i])
    +      |                                     ^

Remove the redundant check.

Fixes: a03b594738 ("xilinx: board: Add support for additional card detection")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Link: https://lore.kernel.org/r/20221008091317.52838-1-heinrich.schuchardt@canonical.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-10-10 12:28:08 +02:00
Venkatesh Yadav Abbarapu
f60be62d77 xilinx: zynqmp: change the type of multiboot variable
In function ‘set_dfu_alt_info’ a comparison of a u8 value against
0 is done. Since it is always false, change the signature of this
function to use an `int` instead, which match the type used in caller:
`multi_boot()`.

Fix the following warning triggered with W=1:

board/xilinx/zynqmp/zynqmp.c:651:23:
warning: comparison is always false due to limited range of data type
[-Wtype-limits]
651 |         if (multiboot < 0)

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20221004055254.26246-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-10-10 12:28:08 +02:00
Venkatesh Yadav Abbarapu
faf6a286f1 xilinx: common: Add print_cpuinfo() declaration
cpu-info.c defines print_cpuinfo(), but neglected to
include its declaration, causing the following sparse and
compile time warnings:

board/xilinx/common/cpu-info.c:10:5:
warning: no previous prototype for 'print_cpuinfo'
[-Wmissing-prototypes]

Include init.h, which includes the missing declaration.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20221004055053.26047-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-10-10 12:28:08 +02:00
Venkatesh Yadav Abbarapu
e1a193b951 xilinx: common: Fix static checker warnings
Avoid signed extension for uuid and byte.

Eliminate the below smatch warnings:
board/xilinx/common/board.c:128 xilinx_eeprom_legacy_cleanup()
warn: impossible condition '(byte == 255) => ((-128)-127 == 255)'

board/xilinx/common/board.c:466 board_late_init_xilinx()
warn: argument 3 to %02x specifier has type 'char'
board/xilinx/common/board.c:466 board_late_init_xilinx()
warn: argument 4 to %02x specifier has type 'char'

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20220926065242.4355-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-10-05 11:36:54 +02:00
Michal Simek
2fe55d1827 xilinx: zynq: Enable early eeprom decoding
Xilinx Zynq evaluation boards have factory program content in eeprom.
Enable reading and decoding eeprom content to get information about board
name, revision and especially getting ethernet mac address.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/db334bd3c0a377074a43b7ae479fade98efb545f.1664265344.git.michal.simek@amd.com
2022-10-05 08:43:53 +02:00
Tom Rini
55ccdee315 Xilinx changes for v2023.01-rc1 (round 2)
xilinx:
 - Add support for new Versal NET SOC
 
 zynqmp:
 - Use mdio bus for ethernet phy description
 - Wire ethernet phy reset via i2c-gpio
 
 versal:
 - Config cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYzGwogAKCRDKSWXLKUoM
 Ial4AJ9+4WHn0MV2X7gK1fyh4lUW7ggPhQCggsYlSoACgMgdji17SAPhCv/W3IA=
 =BmA9
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.01-rc1-v2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2023.01-rc1 (round 2)

xilinx:
- Add support for new Versal NET SOC

zynqmp:
- Use mdio bus for ethernet phy description
- Wire ethernet phy reset via i2c-gpio

versal:
- Config cleanup
2022-09-26 11:28:14 -04:00
Michal Simek
f6aebdf676 arm64: versal-net: Add support for Versal NET platform
Versal NET platform is based on Versal chip which is reusing a lot of IPs.
For more information about new IPs please take a look at DT which describe
currently supported devices.
The patch is adding architecture and board support with soc detection
algorithm. Generic setting should be very similar to Versal but it will
likely diverge in longer run.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/320206853dc370ce290a4e7b6d0bb26b05206021.1663589964.git.michal.simek@amd.com
2022-09-26 14:23:29 +02:00
Pali Rohár
049704f808 board_f: Fix types for board_get_usable_ram_top()
Commit 37dc958947 ("global_data.h: Change ram_top type to phys_addr_t")
changed type of ram_top member from ulong to phys_addr_t but did not
changed types in board_get_usable_ram_top() function which returns value
for ram_top.

So change ulong to phys_addr_t type also in board_get_usable_ram_top()
signature and implementations.

Fixes: 37dc958947 ("global_data.h: Change ram_top type to phys_addr_t")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-23 15:12:42 -04:00
Michal Simek
39d3c3cfaa xilinx: common: Add support for SOC detection
Code supports board detection based on information available in EEPROM in
legacy or FRU format. But this is not enough for emulation and simulation
systems which are lacking these identification EEPROMs. But SOC itself has
normally registers for SOC identification. Based on them it is possible to
compose detected name. That's why prepare infrastructure in common location
for SOC platform detection which is called before board platform detection.
SOC platform detection shouldn't detect real silicon and should fallback to
current existing mechanism to identify boards based on EEPROMs.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/329a8da338927b082e26a958bf69bb18af072420.1662460837.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Michal Simek
a32c3e9e4f arm64: xilinx: Move board_get_usable_ram_top() to common location
The commit ce39ee28ec ("zynqmp: Do not place u-boot to reserved memory
location") adds functionality for ZynqMP to read reserved memory node and
do not place U-Boot to reserved location. This functionality is generic
across all Xilinx SOCs that's why move it to common location to be used by
all Xilinx SOCs.

On zynq platform this is also fixing issue where U-Boot was placed to
locating which was reserved already which ends up with error message
"ERROR: reserving fdt memory region failed (addr=30000000 size=10000000
flags=4)" which is shown when bdinfo is called.

Tested on vck190, zcu102, zc706 and kc705 to cover all platforms.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b0817807912f7c7af6a8e1cf9ee04e5ab5de5f6a.1661430188.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Michal Simek
88eaca26f6 xilinx: Define only mmc devnum not partition
The commit 53b406369e ("DFU: Check the number of arguments and argument
string strictly") added strict control over string that 0:1 partition
definition is not valid anymore that's why use only device number without
partition ID. Device is specified by 2nd parameter and partition by 3rd.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/840eca944f4f2abeeb63b5d724f9ba5fe9a9213b.1660055571.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Michal Simek
93020aa3dc xilinx: zynq: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME for dfu_alt_info
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME stores the name of firmware file to be
loaded by SPL. Name can be selected via Kconfig that's why use the macro.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/601fbc2dfd16b4708fc6b5f86954e10add43334e.1660055571.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Michal Simek
ce183fd79c xilinx: Fix logic when dfu_alt_info is generated
Generate dfu_alt_info only when it is not defined.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/464e4b325c644e52a660df9cf44eeb4d80427f6a.1660055571.git.michal.simek@amd.com
2022-09-13 11:32:48 +02:00
Janne Ylalehto
cf5c48d102 xilinx: zynqmp: Fix AES with a user provided key
The user provided key address was not flushed in struct aes because of
the flushing location in the function.

Signed-off-by: Janne Ylalehto <ylalehto@gmail.com>
Link: https://lore.kernel.org/r/20220816124525.19671-1-ylalehto@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-09-12 12:03:17 +02:00
Oleksandr Suvorov
d7fcbfc19b fpga: xilinx: add bitstream flags to driver desc
Store a set of supported bitstream types in xilinx_desc structure.
It will be used to determine whether an FPGA image is able to be
loaded with a given driver.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Tested-by: Ricardo Salveti <ricardo@foundries.io>
Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Link: https://lore.kernel.org/r/20220722141614.297383-4-oleksandr.suvorov@foundries.io
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-07-26 09:34:21 +02:00
Michal Simek
4a1bfcd7aa xilinx: common: Use strlcpy instead of strncpy
It is recommendation done by checkpatch to all the time have \0 terminated
strings.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c7bfab50c40f6213f1b347b5e4674e382e83cb94.1658413156.git.michal.simek@amd.com
2022-07-26 08:25:16 +02:00
Michal Simek
ee5a4b87a1 xilinx: Wire uuid reading from FRU
UUID is already recorded when FRU is parsed but it is not copied to local
structures and exported to variable that's why simply add it.
Data is saved in binary format but there must be conversion to string for
exporting it to variable and string should be in uuid format too.

One way how to use it directly is to setup pxeuuid based on it. For
example via preboot with "setenv pxeuuid ${board_uuid}"

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/1dfa4b4220a508abc05351da2119880811b77612.1658413156.git.michal.simek@amd.com
2022-07-26 08:25:16 +02:00
Ashok Reddy Soma
65168910ad zynqmp: Run board_get_usable_ram_top() only on main U-Boot
With commit ce39ee28ec ("zynqmp: Do not place u-boot to reserved memory
location"), the function board_get_usable_ram_top() is allocating
MMU_SECTION_SIZE of about 2MB using lmb_alloc(). But we dont have this
much memory in case of mini U-Boot.

Keep these functions which use lmb under CONFIG_LMB so that they are
compiled and used only when LMB is enabled.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/75e52def75f573e554a6b177a78504c128cb0c4a.1657183534.git.michal.simek@amd.com
2022-07-26 08:23:54 +02:00
Stefan Herbrechtsmeier
036ef47b32 arm64: zynqmp: Move helper functions below header includes
Move helper functions in psu_init files below header includes to avoid
forward declarations.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-15-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
f93c1c8f3f xilinx: zynqmp: make spi flash support optional
The set_dfu_alt_info function use the CONFIG_SYS_SPI_U_BOOT_OFFS define
to set the dfu_alt_info environment variable for qspi boot mode. Guard
the usage of CONFIG_SYS_SPI_U_BOOT_OFFS to make spi flash support
optional.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-11-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
86ceedd84e xilinx: common: Separate display cpu info function
Move the print_cpuinfo function of CONFIG_DISPLAY_CPUINFO into its own
source file to support reuse by other board vendors.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-10-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
381ede9e38 xilinx: cpuinfo: Print soc machine
Print the soc machine in the print_cpuinfo function.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-9-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
a1e618a1b9 soc: xilinx: zynqmp: Add machine identification support
Add machine identification support based on the
zynqmp_get_silicon_idcode_name function and use the soc_get_machine
function of the soc uclass to get silicon idcode name for the fpga init.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-8-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
d43d78ef03 xilinx: zynqmp: Merge device lists
Merge the svd / xck devices into to the common zynqmp device list.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-6-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
71278c0e59 xilinx: zynqmp: Reuse shift macros to define masks
Reuse the shift macros to define the masks.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-5-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
9bc5a24dea xilinx: zynqmp: Add macro for device type mask
Add a macro for the device type mask of the id code.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-4-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Stefan Herbrechtsmeier
bcf6f71bd7 xilinx: zynqmp: Replace strncat with strlcat
Replace strncat with strlcat to always produce a valid null-terminated
string.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Link: https://lore.kernel.org/r/20220620163650.18756-3-stefan.herbrechtsmeier-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:37:27 +02:00
Ovidiu Panait
9df16c5937 microblaze: add support for handling PVR data
Add helper code for PVR (Processor Version Register) data handling. It
will be used by the UCLASS_CPU driver to populate cpuinfo fields at
runtime.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-13-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Ovidiu Panait
064057fdbe microblaze: Kconfig: introduce XILINX_MICROBLAZE0_FPGA_FAMILY option
Provide a static Kconfig value for the target FPGA archtitecture, as it is
done in Linux. The cpu-uclass driver will cross-check it with the value
read from PVR10 register.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-12-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Ovidiu Panait
84488fc693 microblaze: cache: introduce Kconfig options for icache/dcache sizes
Replace XILINX_DCACHE_BYTE_SIZE macro with two Kconfig symbols for
instruction and data caches sizes, respectively:
CONFIG_XILINX_MICROBLAZE0_ICACHE_SIZE
CONFIG_XILINX_MICROBLAZE0_DCACHE_SIZE

Also, get rid of the hardcoded value in icache_disable().

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-8-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com> (s/bralid/brlid/g)
2022-06-24 14:16:00 +02:00
Ovidiu Panait
8daf89678e microblaze: cache: improve icache Kconfig options
Replace CONFIG_ICACHE with a Kconfig option more limited in scope -
XILINX_MICROBLAZE0_USE_WIC. It should be enabled if the processor supports
the "wic" (Write to Instruction Cache) instruction. It will be used to
guard "wic" invocations in microblaze cache code.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-6-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Ovidiu Panait
ef0a592ae8 microblaze: cache: improve dcache Kconfig options
Replace CONFIG_DCACHE with a Kconfig option more limited in scope -
XILINX_MICROBLAZE0_USE_WDC. It should be enabled if the processor supports
the "wdc" (Write to Data Cache) instruction. It will be used to guard
"wdc" invocations in microblaze cache code.

Also, drop all ifdefs around flush_cache() calls and only keep one
CONFIG_IS_ENABLED() guard within flush_cache() itself.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20220531181435.3473549-5-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:16:00 +02:00
Ashok Reddy Soma
2eeceb4842 arm64: versal: Add support to load an app at EL1
Add support to switch to EL1 and load an EL1 app from U-Boot which is
executing at EL2 or EL3 in aarch64 mode.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Link: https://lore.kernel.org/r/20220506055345.1921-1-ashok.reddy.soma@xilinx.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24 14:11:05 +02:00
Michal Simek
93216276f5 xilinx: fru: Replace spaces with \0 in detected revision
Also fix board revision field where spaces are used instead of \0.
The same change was done for board name by commit 530560b6f8 ("xilinx:
fru: Replace spaces with \0 in detected name").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e069e5134e57899e859786ad8ba48721df6df752.1653911444.git.michal.simek@amd.com
2022-06-06 09:32:26 +02:00
Neal Frager
6be41ea4e6 arm64: zynqmp: zynqmp-sm-k26-revA: Fix DP PLL configuration
This patch fixes the DP audio and video PLL configurations for the zynqmp-sm-k26-revA som.

The Linux DP driver expects the DP to be using the following PLL config:
  - DP video PLL should use the VPLL (0x0)
  - DP audio PLL should use the RPLL (0x3)
  - DP system time clock PLL should use RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
Register 0xFD1A007C configures the DP system time clock PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/fa7e9abc419c9d7648405d1c62367dbe701d09b8.1652709736.git.michal.simek@amd.com
2022-05-18 13:17:54 +02:00
Neal Frager
2946c551f1 arm64: zynqmp: zynqmp-zcu102-revA: Fix DP PLL configuration
This patch fixes the DP audio and video PLL configurations for the
zynqmp-zcu102-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
  - DP video PLL should use the VPLL (0x0)
  - DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/b2eb87758e0cd4844e1754da8c58fce58d9cf683.1651740949.git.michal.simek@amd.com
2022-05-18 13:17:18 +02:00
Neal Frager
a3659640e0 arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration
This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
  - DP video PLL should use the VPLL (0x0)
  - DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com
2022-05-18 13:17:18 +02:00
Neal Frager
80b8bbbf98 arm64: zynqmp: zynqmp-zcu106-rev1.0: Fix DP PLL configuration
This patch fixes the DP audio and video PLL configurations for the zynqmp-zcu106-rev1.0 evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
  - DP video PLL should use the VPLL (0x0)
  - DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ae42ad6185418713a473660c8d15903299af7764.1652192319.git.michal.simek@amd.com
2022-05-18 13:17:18 +02:00
Michal Simek
9c563e916c xilinx: Handle board_get_usable_ram_top(0) properly
board_get_usable_ram_top() was designed for getting the top most location
for U-Boot allocation that's why function itself supports via total_size
parameter to find out where the right location for U-Boot is.
But function itself is also reused by different (EFI) which is passing
total_size as 0 to find out where the usable ram top is. For this case
doesn't make sense (a waste time) to call any lmb functions.
That's why simply return gd->ram_top.

And gd->ram_top is filled already based on previous call for U-Boot iself.
The same solution is also used by stm32mp by commit 92b611e8b0 ("stm32mp:
correctly handle board_get_usable_ram_top(0)") and commit c8510e397f
("stm32mp: Fix board_get_usable_ram_top()").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/44470619e74f3e480b70deac24578e3e0d5c907e.1651225945.git.michal.simek@amd.com
2022-05-13 09:10:02 +02:00
Peng Fan
d8c033a9cd xilinx: versal: board: use CONFIG_COUNTER_FREQUENCY
Since versal has CONFIG_COUNTER_FREQUENCY, so use it. And
COUNTER_FREQUENCY will be dropped.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2022-04-21 14:32:40 -04:00
Michal Simek
fcbdd7a070 .mailmap: Start to use new amd.com email address
Xilinx has been acquired by AMD that's why emails should be also updated.
The patch is updating .mailmap file and also MAINTAINERS files as was done
by commit 5cd1ecb994 ("ppc: qemu: Update MAINTAINERS for correct email
address").
The rest of my emails are not going to change.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-04-19 14:51:11 -04:00