cmd_i2c.c: sorted commands alphabetically

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
This commit is contained in:
Frans Meulenbroeks 2010-02-25 10:12:15 +01:00 committed by Wolfgang Denk
parent bfc3b77ebe
commit fb0070e910

View File

@ -1302,25 +1302,24 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
i2c, 6, 1, do_i2c,
"I2C sub-system",
"speed [speed] - show or set I2C bus speed\n"
#if defined(CONFIG_I2C_MUX)
"i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\n"
"bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
#endif /* CONFIG_I2C_MUX */
"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
#if defined(CONFIG_I2C_MULTI_BUS)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
"i2c probe - show devices on the I2C bus\n"
"i2c reset - re-init the I2C Controller\n"
"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device"
#if defined(CONFIG_CMD_SDRAM)
"\n"
"i2c sdram chip - print SDRAM configuration information"
"i2c sdram chip - print SDRAM configuration information\n"
#endif
"i2c speed [speed] - show or set I2C bus speed"
);
#if defined(CONFIG_I2C_MUX)