mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 12:44:23 +08:00
configs: add khadas-vim3{l}_android for AOSP support
The Khadas VIM3 and VIM3L board are well supported in AOSP[1]. However, there is no mainline U-Boot support for it. The U-Boot used in AOSP is based on a vendor tree [2] Add all the necessary bits to flash and boot Android for both Khadas VIM3 and VIM3L boards. For Android instructions, refer to [1] [1] https://source.android.com/setup/build/devices#vim3_and_vim3l_boards [2] https://gitlab.com/baylibre/amlogic/atv/u-boot Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211122152207.219023-3-mkorpershoek@baylibre.com
This commit is contained in:
Mattijs Korpershoek
Neil Armstrong
parent
4eff7426c9
commit
f89b90d2d9
@ -4,6 +4,8 @@ S: Maintained
|
||||
L: u-boot-amlogic@groups.io
|
||||
F: board/amlogic/vim3/
|
||||
F: configs/khadas-vim3_defconfig
|
||||
F: configs/khadas-vim3_android_defconfig
|
||||
F: configs/khadas-vim3l_defconfig
|
||||
F: configs/khadas-vim3l_android_defconfig
|
||||
F: doc/board/amlogic/khadas-vim3.rst
|
||||
F: doc/board/amlogic/khadas-vim3l.rst
|
||||
|
||||
107
configs/khadas-vim3_android_defconfig
Normal file
107
configs/khadas-vim3_android_defconfig
Normal file
@ -0,0 +1,107 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_BOARD="vim3"
|
||||
CONFIG_SYS_CONFIG_NAME="khadas-vim3_android"
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_SYS_TEXT_BASE=0x01000000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_ENV_SIZE=0x10000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-a311d-khadas-vim3"
|
||||
CONFIG_MESON_G12A=y
|
||||
CONFIG_DEBUG_UART_BASE=0xff803000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_IDENT_STRING=" khadas-vim3"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_SYS_LOAD_ADDR=0x1000000
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_MISC_INIT_R=y
|
||||
CONFIG_AVB_VERIFY=y
|
||||
# CONFIG_CMD_BDI is not set
|
||||
CONFIG_CMD_ADTIMG=y
|
||||
CONFIG_CMD_ABOOTIMG=y
|
||||
# CONFIG_CMD_IMI is not set
|
||||
CONFIG_CMD_BCB=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_SF_TEST=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
CONFIG_CMD_AVB=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_ADC=y
|
||||
CONFIG_SARADC_MESON=y
|
||||
CONFIG_BUTTON=y
|
||||
CONFIG_BUTTON_ADC=y
|
||||
CONFIG_USB_FUNCTION_FASTBOOT=y
|
||||
CONFIG_FASTBOOT_BUF_ADDR=0x6000000
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=2
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MESON=y
|
||||
CONFIG_MMC_MESON_GX=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_MTD=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_DM_MDIO=y
|
||||
CONFIG_DM_MDIO_MUX=y
|
||||
CONFIG_ETH_DESIGNWARE_MESON8B=y
|
||||
CONFIG_MDIO_MUX_MESON_G12A=y
|
||||
CONFIG_NVME=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIE_DW_MESON=y
|
||||
CONFIG_MESON_G12A_USB_PHY=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_MESON_G12A=y
|
||||
CONFIG_POWER_DOMAIN=y
|
||||
CONFIG_MESON_EE_POWER_DOMAIN=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_DEBUG_UART_SKIP_INIT=y
|
||||
CONFIG_MESON_SERIAL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_MESON_SPIFC=y
|
||||
CONFIG_SYSINFO=y
|
||||
CONFIG_SYSINFO_SMBIOS=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_DWC3=y
|
||||
# CONFIG_USB_DWC3_GADGET is not set
|
||||
CONFIG_USB_DWC3_MESON_G12A=y
|
||||
CONFIG_USB_KEYBOARD=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
|
||||
CONFIG_USB_GADGET_DWC2_OTG=y
|
||||
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
|
||||
CONFIG_DM_VIDEO=y
|
||||
# CONFIG_VIDEO_BPP8 is not set
|
||||
# CONFIG_VIDEO_BPP16 is not set
|
||||
CONFIG_SYS_WHITE_ON_BLACK=y
|
||||
CONFIG_VIDEO_MESON=y
|
||||
CONFIG_VIDEO_DT_SIMPLEFB=y
|
||||
CONFIG_SPLASH_SCREEN=y
|
||||
CONFIG_SPLASH_SCREEN_ALIGN=y
|
||||
CONFIG_VIDEO_BMP_RLE8=y
|
||||
CONFIG_BMP_16BPP=y
|
||||
CONFIG_BMP_24BPP=y
|
||||
CONFIG_BMP_32BPP=y
|
||||
CONFIG_LIBAVB=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
107
configs/khadas-vim3l_android_defconfig
Normal file
107
configs/khadas-vim3l_android_defconfig
Normal file
@ -0,0 +1,107 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_BOARD="vim3"
|
||||
CONFIG_SYS_CONFIG_NAME="khadas-vim3l_android"
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_SYS_TEXT_BASE=0x01000000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_ENV_SIZE=0x10000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-khadas-vim3l"
|
||||
CONFIG_MESON_G12A=y
|
||||
CONFIG_DEBUG_UART_BASE=0xff803000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_IDENT_STRING=" khadas-vim3l"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_SYS_LOAD_ADDR=0x1000000
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_MISC_INIT_R=y
|
||||
CONFIG_AVB_VERIFY=y
|
||||
# CONFIG_CMD_BDI is not set
|
||||
CONFIG_CMD_ADTIMG=y
|
||||
CONFIG_CMD_ABOOTIMG=y
|
||||
# CONFIG_CMD_IMI is not set
|
||||
CONFIG_CMD_BCB=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_SF_TEST=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
CONFIG_CMD_AVB=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_ADC=y
|
||||
CONFIG_SARADC_MESON=y
|
||||
CONFIG_BUTTON=y
|
||||
CONFIG_BUTTON_ADC=y
|
||||
CONFIG_USB_FUNCTION_FASTBOOT=y
|
||||
CONFIG_FASTBOOT_BUF_ADDR=0x6000000
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=2
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_MESON=y
|
||||
CONFIG_MMC_MESON_GX=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_MTD=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_DM_MDIO=y
|
||||
CONFIG_DM_MDIO_MUX=y
|
||||
CONFIG_ETH_DESIGNWARE_MESON8B=y
|
||||
CONFIG_MDIO_MUX_MESON_G12A=y
|
||||
CONFIG_NVME=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIE_DW_MESON=y
|
||||
CONFIG_MESON_G12A_USB_PHY=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_MESON_G12A=y
|
||||
CONFIG_POWER_DOMAIN=y
|
||||
CONFIG_MESON_EE_POWER_DOMAIN=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_DEBUG_UART_SKIP_INIT=y
|
||||
CONFIG_MESON_SERIAL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_MESON_SPIFC=y
|
||||
CONFIG_SYSINFO=y
|
||||
CONFIG_SYSINFO_SMBIOS=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_DWC3=y
|
||||
# CONFIG_USB_DWC3_GADGET is not set
|
||||
CONFIG_USB_DWC3_MESON_G12A=y
|
||||
CONFIG_USB_KEYBOARD=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
|
||||
CONFIG_USB_GADGET_DWC2_OTG=y
|
||||
CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
|
||||
CONFIG_DM_VIDEO=y
|
||||
# CONFIG_VIDEO_BPP8 is not set
|
||||
# CONFIG_VIDEO_BPP16 is not set
|
||||
CONFIG_SYS_WHITE_ON_BLACK=y
|
||||
CONFIG_VIDEO_MESON=y
|
||||
CONFIG_VIDEO_DT_SIMPLEFB=y
|
||||
CONFIG_SPLASH_SCREEN=y
|
||||
CONFIG_SPLASH_SCREEN_ALIGN=y
|
||||
CONFIG_VIDEO_BMP_RLE8=y
|
||||
CONFIG_BMP_16BPP=y
|
||||
CONFIG_BMP_24BPP=y
|
||||
CONFIG_BMP_32BPP=y
|
||||
CONFIG_LIBAVB=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
34
include/configs/khadas-vim3_android.h
Normal file
34
include/configs/khadas-vim3_android.h
Normal file
@ -0,0 +1,34 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Configuration for the khadas VIM3 Android
|
||||
*
|
||||
* Copyright (C) 2021 Baylibre, SAS
|
||||
* Author: Guillaume LA ROQUE <glaroque@baylibre.com>
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define LOGO_UUID "43a3305d-150f-4cc9-bd3b-38fca8693846;"
|
||||
#define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
|
||||
|
||||
#define PARTS_DEFAULT \
|
||||
"uuid_disk=${uuid_gpt_disk};" \
|
||||
"name=logo,start=512K,size=2M,uuid=" LOGO_UUID \
|
||||
"name=misc,size=512K,uuid=${uuid_gpt_misc};" \
|
||||
"name=dtbo,size=8M,uuid=${uuid_gpt_dtbo};" \
|
||||
"name=vbmeta,size=512K,uuid=${uuid_gpt_vbmeta};" \
|
||||
"name=boot,size=32M,bootable,uuid=${uuid_gpt_boot};" \
|
||||
"name=recovery,size=32M,uuid=${uuid_gpt_recovery};" \
|
||||
"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
|
||||
"name=super,size=1792M,uuid=${uuid_gpt_super};" \
|
||||
"name=userdata,size=12786M,uuid=${uuid_gpt_userdata};" \
|
||||
"name=rootfs,size=-,uuid=" ROOT_UUID
|
||||
|
||||
#define EXTRA_ANDROID_ENV_SETTINGS \
|
||||
"board=vim3\0" \
|
||||
"board_name=vim3\0" \
|
||||
|
||||
#include <configs/meson64_android.h>
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
34
include/configs/khadas-vim3l_android.h
Normal file
34
include/configs/khadas-vim3l_android.h
Normal file
@ -0,0 +1,34 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Configuration for the khadas VIM3L Android
|
||||
*
|
||||
* Copyright (C) 2021 Baylibre, SAS
|
||||
* Author: Guillaume LA ROQUE <glaroque@baylibre.com>
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define LOGO_UUID "43a3305d-150f-4cc9-bd3b-38fca8693846;"
|
||||
#define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
|
||||
|
||||
#define PARTS_DEFAULT \
|
||||
"uuid_disk=${uuid_gpt_disk};" \
|
||||
"name=logo,start=512K,size=2M,uuid=" LOGO_UUID \
|
||||
"name=misc,size=512K,uuid=${uuid_gpt_misc};" \
|
||||
"name=dtbo,size=8M,uuid=${uuid_gpt_dtbo};" \
|
||||
"name=vbmeta,size=512K,uuid=${uuid_gpt_vbmeta};" \
|
||||
"name=boot,size=32M,bootable,uuid=${uuid_gpt_boot};" \
|
||||
"name=recovery,size=32M,uuid=${uuid_gpt_recovery};" \
|
||||
"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
|
||||
"name=super,size=1792M,uuid=${uuid_gpt_super};" \
|
||||
"name=userdata,size=12786M,uuid=${uuid_gpt_userdata};" \
|
||||
"name=rootfs,size=-,uuid=" ROOT_UUID
|
||||
|
||||
#define EXTRA_ANDROID_ENV_SETTINGS \
|
||||
"board=vim3l\0" \
|
||||
"board_name=vim3l\0" \
|
||||
|
||||
#include <configs/meson64_android.h>
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
@ -104,6 +104,12 @@
|
||||
"elif test $board_name = sei610; then " \
|
||||
"echo \" Reading DTB for sei610...\"; " \
|
||||
"setenv dtb_index 1;" \
|
||||
"elif test $board_name = vim3l; then " \
|
||||
"echo \" Reading DTB for vim3l...\"; " \
|
||||
"setenv dtb_index 2;" \
|
||||
"elif test $board_name = vim3; then " \
|
||||
"echo \" Reading DTB for vim3...\"; " \
|
||||
"setenv dtb_index 3;" \
|
||||
"else " \
|
||||
"echo Error: Android boot is not supported for $board_name; " \
|
||||
"exit; " \
|
||||
@ -117,6 +123,12 @@
|
||||
"elif test $board_name = sei610; then " \
|
||||
"echo \" Reading DTBO for sei610...\"; " \
|
||||
"setenv dtbo_index 1;" \
|
||||
"elif test $board_name = vim3l; then " \
|
||||
"echo \" Reading DTBO for vim3l...\"; " \
|
||||
"setenv dtbo_index 2;" \
|
||||
"elif test $board_name = vim3; then " \
|
||||
"echo \" Reading DTBO for vim3...\"; " \
|
||||
"setenv dtbo_index 3;" \
|
||||
"else " \
|
||||
"echo Error: Android boot is not supported for $board_name; " \
|
||||
"exit; " \
|
||||
|
||||
Loading…
Reference in New Issue
Block a user