diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index d7b3763cf9e..d7414e216bd 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -125,6 +125,11 @@ config TARGET_P1020RDB_PC
 	select SUPPORT_SPL
 	select SUPPORT_TPL
 
+config TARGET_P1020RDB_PD
+	bool "Support P1020RDB-PD"
+	select SUPPORT_SPL
+	select SUPPORT_TPL
+
 
 config TARGET_P1_P2_RDB_PC
 	bool "Support p1_p2_rdb_pc"
diff --git a/board/freescale/p1_p2_rdb_pc/Kconfig b/board/freescale/p1_p2_rdb_pc/Kconfig
index 6fa68595c08..c46e04e08dc 100644
--- a/board/freescale/p1_p2_rdb_pc/Kconfig
+++ b/board/freescale/p1_p2_rdb_pc/Kconfig
@@ -1,6 +1,7 @@
 if TARGET_P1_P2_RDB_PC		|| \
 	TARGET_P1020MBG		|| \
-	TARGET_P1020RDB_PC
+	TARGET_P1020RDB_PC	|| \
+	TARGET_P1020RDB_PD
 
 config SYS_BOARD
 	default "p1_p2_rdb_pc"
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 2abe84096b2..8291c188465 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -78,7 +78,7 @@ dimm_params_t ddr_raw_timing = {
 	.refresh_rate_ps = 7800000,
 	.tfaw_ps = 30000,
 };
-#elif (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD))
+#elif (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 /* Micron MT41J512M8_187E */
 dimm_params_t ddr_raw_timing = {
 	.n_ranks = 2,
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 1a8744e6887..33f2c7e1339 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -428,7 +428,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 {
 	phys_addr_t base;
 	phys_size_t size;
-#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC)
+#if defined(CONFIG_TARGET_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC)
 	const char *soc_usb_compat = "fsl-usb2-dr";
 	int usb_err, usb1_off, usb2_off;
 #endif
@@ -478,7 +478,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 	}
 #endif
 
-#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC)
+#if defined(CONFIG_TARGET_P1020RDB_PD) || defined(CONFIG_TARGET_P1020RDB_PC)
 /* Delete USB2 node as it is muxed with eLBC */
 	usb1_off = fdt_node_offset_by_compatible(blob, -1,
 		soc_usb_compat);
diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c
index d88c06f1afd..7cba411007f 100644
--- a/board/freescale/p1_p2_rdb_pc/tlb.c
+++ b/board/freescale/p1_p2_rdb_pc/tlb.c
@@ -85,7 +85,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, 0,
 			0, 8, BOOKE_PAGESZ_1G, 1),
 
-#if defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD)
 	/* 2G DDR on P1020MBG, map the second 1G */
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
 			CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig
index f2d8fe21245..86cf9527620 100644
--- a/configs/P1020RDB-PD_NAND_defconfig
+++ b/configs/P1020RDB-PD_NAND_defconfig
@@ -2,12 +2,12 @@ CONFIG_PPC=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PD=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y
diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig
index 80516e0b501..7131bceb280 100644
--- a/configs/P1020RDB-PD_SDCARD_defconfig
+++ b/configs/P1020RDB-PD_SDCARD_defconfig
@@ -6,12 +6,12 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PD=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig
index 6ac21e70420..3bc9afdddfc 100644
--- a/configs/P1020RDB-PD_SPIFLASH_defconfig
+++ b/configs/P1020RDB-PD_SPIFLASH_defconfig
@@ -7,12 +7,12 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PD=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig
index ecb227250cd..1cae0664259 100644
--- a/configs/P1020RDB-PD_defconfig
+++ b/configs/P1020RDB-PD_defconfig
@@ -1,11 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1020RDB_PD=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index edb5395f28c..010a9edb93e 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -58,7 +58,7 @@
  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
  */
-#if defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_BOARDNAME "P1020RDB-PD"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1020
@@ -336,7 +336,7 @@
 #define SPD_EEPROM_ADDRESS 0x52
 #undef CONFIG_FSL_DDR_INTERACTIVE
 
-#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD))
+#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 #define CONFIG_SYS_SDRAM_SIZE_LAW	LAW_SIZE_2G
 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
 #else
@@ -406,7 +406,7 @@
 /*
  * Local Bus Definitions
  */
-#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD))
+#if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
 #define CONFIG_SYS_FLASH_BASE		0xec000000
 #elif defined(CONFIG_P1020UTM)
@@ -455,7 +455,7 @@
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_CMD_NAND
-#if defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 #else
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(16 * 1024)
@@ -466,7 +466,7 @@
 	| BR_PS_8	/* Port Size = 8 bit */ \
 	| BR_MS_FCM	/* MSEL = FCM */ \
 	| BR_V)	/* valid */
-#if defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_SYS_NAND_OR_PRELIM	(OR_AM_32KB \
 	| OR_FCM_PGS	/* Large Page*/ \
 	| OR_FCM_CSCT \
@@ -853,7 +853,7 @@
 #endif
 #endif
 
-#if defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
 #endif
 
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 81118af497d..6d7b5ffb850 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3384,7 +3384,6 @@ CONFIG_OS_ENV_ADDR
 CONFIG_OTHBOOTARGS
 CONFIG_OVERWRITE_ETHADDR_ONCE
 CONFIG_P1020
-CONFIG_P1020RDB_PD
 CONFIG_P1020UTM
 CONFIG_P1021
 CONFIG_P1021RDB