mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 04:34:22 +08:00
ti814x_evm: add ti814x evm board support
Add TI814X EVM board directory, config file, and MAINTAINERS entry. Enable build. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com> [trini: Adapt to recent omap_hsmmc requirements, Matt re-tested] Signed-off-by: Tom Rini <trini@ti.com>
This commit is contained in:
Matt Porter
Tom Rini
parent
6213a68fe8
commit
ea7b96b6aa
@ -833,6 +833,10 @@ Stelian Pop <stelian@popies.net>
|
||||
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
|
||||
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
|
||||
|
||||
Matt Porter <mporter@ti.com>
|
||||
|
||||
ti814x_evm ARM ARMV7 (TI814x Soc)
|
||||
|
||||
Dave Purdy <david.c.purdy@gmail.com>
|
||||
|
||||
pogo_e02 ARM926EJS (Kirkwood SoC)
|
||||
|
||||
2
Makefile
2
Makefile
@ -331,7 +331,7 @@ LIBS-y += api/libapi.o
|
||||
LIBS-y += post/libpost.o
|
||||
LIBS-y += test/libtest.o
|
||||
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
|
||||
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
|
||||
endif
|
||||
|
||||
|
||||
@ -32,7 +32,7 @@ COBJS += cache_v7.o
|
||||
COBJS += cpu.o
|
||||
COBJS += syslib.o
|
||||
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6),)
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),)
|
||||
SOBJS += lowlevel_init.o
|
||||
endif
|
||||
|
||||
|
||||
@ -36,7 +36,7 @@ COBJS += emif-common.o
|
||||
COBJS += vc.o
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
|
||||
COBJS += boot-common.o
|
||||
SOBJS += lowlevel_init.o
|
||||
endif
|
||||
|
||||
46
board/ti/ti814x/Makefile
Normal file
46
board/ti/ti814x/Makefile
Normal file
@ -0,0 +1,46 @@
|
||||
#
|
||||
# Makefile
|
||||
#
|
||||
# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||
# kind, whether express or implied; without even the implied warranty
|
||||
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
ifdef CONFIG_SPL_BUILD
|
||||
COBJS := mux.o
|
||||
endif
|
||||
|
||||
COBJS += evm.o
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
198
board/ti/ti814x/evm.c
Normal file
198
board/ti/ti814x/evm.c
Normal file
@ -0,0 +1,198 @@
|
||||
/*
|
||||
* evm.c
|
||||
*
|
||||
* Board functions for TI814x EVM
|
||||
*
|
||||
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <errno.h>
|
||||
#include <spl.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/omap.h>
|
||||
#include <asm/arch/ddr_defs.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/mmc_host_def.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/emif.h>
|
||||
#include <asm/gpio.h>
|
||||
#include "evm.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
|
||||
static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
|
||||
#endif
|
||||
|
||||
/* UART Defines */
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
#define UART_RESET (0x1 << 1)
|
||||
#define UART_CLK_RUNNING_MASK 0x1
|
||||
#define UART_SMART_IDLE_EN (0x1 << 0x3)
|
||||
|
||||
static void rtc32k_enable(void)
|
||||
{
|
||||
struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
|
||||
|
||||
/*
|
||||
* Unlock the RTC's registers. For more details please see the
|
||||
* RTC_SS section of the TRM. In order to unlock we need to
|
||||
* write these specific values (keys) in this order.
|
||||
*/
|
||||
writel(0x83e70b13, &rtc->kick0r);
|
||||
writel(0x95a4f1e0, &rtc->kick1r);
|
||||
|
||||
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
|
||||
writel((1 << 3) | (1 << 6), &rtc->osc);
|
||||
}
|
||||
|
||||
static void uart_enable(void)
|
||||
{
|
||||
u32 regVal;
|
||||
|
||||
/* UART softreset */
|
||||
regVal = readl(&uart_base->uartsyscfg);
|
||||
regVal |= UART_RESET;
|
||||
writel(regVal, &uart_base->uartsyscfg);
|
||||
while ((readl(&uart_base->uartsyssts) &
|
||||
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
|
||||
;
|
||||
|
||||
/* Disable smart idle */
|
||||
regVal = readl(&uart_base->uartsyscfg);
|
||||
regVal |= UART_SMART_IDLE_EN;
|
||||
writel(regVal, &uart_base->uartsyscfg);
|
||||
}
|
||||
|
||||
static void wdt_disable(void)
|
||||
{
|
||||
writel(0xAAAA, &wdtimer->wdtwspr);
|
||||
while (readl(&wdtimer->wdtwwps) != 0x0)
|
||||
;
|
||||
writel(0x5555, &wdtimer->wdtwspr);
|
||||
while (readl(&wdtimer->wdtwwps) != 0x0)
|
||||
;
|
||||
}
|
||||
|
||||
static const struct cmd_control evm_ddr2_cctrl_data = {
|
||||
.cmd0csratio = 0x80,
|
||||
.cmd0dldiff = 0x04,
|
||||
.cmd0iclkout = 0x00,
|
||||
|
||||
.cmd1csratio = 0x80,
|
||||
.cmd1dldiff = 0x04,
|
||||
.cmd1iclkout = 0x00,
|
||||
|
||||
.cmd2csratio = 0x80,
|
||||
.cmd2dldiff = 0x04,
|
||||
.cmd2iclkout = 0x00,
|
||||
};
|
||||
|
||||
static const struct emif_regs evm_ddr2_emif0_regs = {
|
||||
.sdram_config = 0x40801ab2,
|
||||
.ref_ctrl = 0x10000c30,
|
||||
.sdram_tim1 = 0x0aaaf552,
|
||||
.sdram_tim2 = 0x043631d2,
|
||||
.sdram_tim3 = 0x00000327,
|
||||
.emif_ddr_phy_ctlr_1 = 0x00000007
|
||||
};
|
||||
|
||||
static const struct emif_regs evm_ddr2_emif1_regs = {
|
||||
.sdram_config = 0x40801ab2,
|
||||
.ref_ctrl = 0x10000c30,
|
||||
.sdram_tim1 = 0x0aaaf552,
|
||||
.sdram_tim2 = 0x043631d2,
|
||||
.sdram_tim3 = 0x00000327,
|
||||
.emif_ddr_phy_ctlr_1 = 0x00000007
|
||||
};
|
||||
|
||||
const struct dmm_lisa_map_regs evm_lisa_map_regs = {
|
||||
.dmm_lisa_map_0 = 0x00000000,
|
||||
.dmm_lisa_map_1 = 0x00000000,
|
||||
.dmm_lisa_map_2 = 0x806c0300,
|
||||
.dmm_lisa_map_3 = 0x806c0300,
|
||||
};
|
||||
|
||||
static const struct ddr_data evm_ddr2_data = {
|
||||
.datardsratio0 = ((0x35<<10) | (0x35<<0)),
|
||||
.datawdsratio0 = ((0x20<<10) | (0x20<<0)),
|
||||
.datawiratio0 = ((0<<10) | (0<<0)),
|
||||
.datagiratio0 = ((0<<10) | (0<<0)),
|
||||
.datafwsratio0 = ((0x90<<10) | (0x90<<0)),
|
||||
.datawrsratio0 = ((0x50<<10) | (0x50<<0)),
|
||||
.datauserank0delay = 1,
|
||||
.datadldiff0 = 0x4,
|
||||
};
|
||||
#endif
|
||||
|
||||
/*
|
||||
* early system init of muxing and clocks.
|
||||
*/
|
||||
void s_init(void)
|
||||
{
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
/* WDT1 is already running when the bootloader gets control
|
||||
* Disable it to avoid "random" resets
|
||||
*/
|
||||
wdt_disable();
|
||||
|
||||
/* Setup the PLLs and the clocks for the peripherals */
|
||||
pll_init();
|
||||
|
||||
/* Enable RTC32K clock */
|
||||
rtc32k_enable();
|
||||
|
||||
/* Set UART pins */
|
||||
enable_uart0_pin_mux();
|
||||
|
||||
/* Set MMC pins */
|
||||
enable_mmc1_pin_mux();
|
||||
|
||||
/* Enable UART */
|
||||
uart_enable();
|
||||
|
||||
gd = &gdata;
|
||||
|
||||
preloader_console_init();
|
||||
|
||||
config_dmm(&evm_lisa_map_regs);
|
||||
|
||||
config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,
|
||||
&evm_ddr2_emif0_regs, 0);
|
||||
config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,
|
||||
&evm_ddr2_emif1_regs, 1);
|
||||
#endif
|
||||
}
|
||||
|
||||
/*
|
||||
* Basic board specific setup. Pinmux has been handled already.
|
||||
*/
|
||||
int board_init(void)
|
||||
{
|
||||
gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
omap_mmc_init(1, 0, 0, -1, -1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
7
board/ti/ti814x/evm.h
Normal file
7
board/ti/ti814x/evm.h
Normal file
@ -0,0 +1,7 @@
|
||||
#ifndef _EVM_H
|
||||
#define _EVM_H
|
||||
|
||||
void enable_uart0_pin_mux(void);
|
||||
void enable_mmc1_pin_mux(void);
|
||||
|
||||
#endif /* _EVM_H */
|
||||
51
board/ti/ti814x/mux.c
Normal file
51
board/ti/ti814x/mux.c
Normal file
@ -0,0 +1,51 @@
|
||||
/*
|
||||
* mux.c
|
||||
*
|
||||
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation version 2.
|
||||
*
|
||||
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||
* kind, whether express or implied; without even the implied warranty
|
||||
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/io.h>
|
||||
#include <i2c.h>
|
||||
#include "evm.h"
|
||||
|
||||
static struct module_pin_mux uart0_pin_mux[] = {
|
||||
{OFFSET(pincntl70), PULLUP_EN | MODE(0x01)}, /* UART0_RXD */
|
||||
{OFFSET(pincntl71), PULLUP_EN | MODE(0x01)}, /* UART0_TXD */
|
||||
{-1},
|
||||
};
|
||||
|
||||
static struct module_pin_mux mmc1_pin_mux[] = {
|
||||
{OFFSET(pincntl1), PULLUP_EN | MODE(0x01)}, /* SD1_CLK */
|
||||
{OFFSET(pincntl2), PULLUP_EN | MODE(0x01)}, /* SD1_CMD */
|
||||
{OFFSET(pincntl3), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[0] */
|
||||
{OFFSET(pincntl4), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[1] */
|
||||
{OFFSET(pincntl5), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[2] */
|
||||
{OFFSET(pincntl6), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[3] */
|
||||
{OFFSET(pincntl74), PULLUP_EN | MODE(0x40)}, /* SD1_POW */
|
||||
{OFFSET(pincntl75), MODE(0x40)}, /* SD1_SDWP */
|
||||
{OFFSET(pincntl80), PULLUP_EN | MODE(0x02)}, /* SD1_SDCD */
|
||||
{-1},
|
||||
};
|
||||
|
||||
void enable_uart0_pin_mux(void)
|
||||
{
|
||||
configure_module_pin_mux(uart0_pin_mux);
|
||||
}
|
||||
|
||||
void enable_mmc1_pin_mux(void)
|
||||
{
|
||||
configure_module_pin_mux(mmc1_pin_mux);
|
||||
}
|
||||
@ -241,6 +241,7 @@ am335x_evm_uart3 arm armv7 am335x ti
|
||||
am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
|
||||
am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
|
||||
am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
|
||||
ti814x_evm arm armv7 ti814x ti am33xx
|
||||
pcm051 arm armv7 pcm051 phytec am33xx pcm051
|
||||
highbank arm armv7 highbank - highbank
|
||||
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
|
||||
|
||||
221
include/configs/ti814x_evm.h
Normal file
221
include/configs/ti814x_evm.h
Normal file
@ -0,0 +1,221 @@
|
||||
/*
|
||||
* ti814x_evm.h
|
||||
*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation version 2.
|
||||
*
|
||||
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||
* kind, whether express or implied; without even the implied warranty
|
||||
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_TI814X_EVM_H
|
||||
#define __CONFIG_TI814X_EVM_H
|
||||
|
||||
#define CONFIG_TI81XX
|
||||
#define CONFIG_TI814X
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#include <asm/arch/omap.h>
|
||||
|
||||
#define CONFIG_DMA_COHERENT
|
||||
#define CONFIG_DMA_COHERENT_SIZE (1 << 20)
|
||||
|
||||
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
|
||||
#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* Use HUSH for command parsing */
|
||||
#define CONFIG_SYS_PROMPT "U-Boot# "
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_TI8148EVM
|
||||
|
||||
#define CONFIG_OF_LIBFDT
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG /* for ramdisk support */
|
||||
|
||||
/* commands to include */
|
||||
# include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_VERSION_VARIABLE
|
||||
|
||||
#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */
|
||||
#define CONFIG_ENV_VARS_UBOOT_CONFIG
|
||||
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"loadaddr=0x80200000\0" \
|
||||
"fdtaddr=0x80F80000\0" \
|
||||
"rdaddr=0x81000000\0" \
|
||||
"bootfile=/boot/uImage\0" \
|
||||
"fdtfile=\0" \
|
||||
"console=ttyO0,115200n8\0" \
|
||||
"optargs=\0" \
|
||||
"mmcdev=0\0" \
|
||||
"mmcroot=/dev/mmcblk0p2 ro\0" \
|
||||
"mmcrootfstype=ext4 rootwait\0" \
|
||||
"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
|
||||
"ramrootfstype=ext2\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${mmcroot} " \
|
||||
"rootfstype=${mmcrootfstype}\0" \
|
||||
"bootenv=uEnv.txt\0" \
|
||||
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
|
||||
"importbootenv=echo Importing environment from mmc ...; " \
|
||||
"env import -t $loadaddr $filesize\0" \
|
||||
"ramargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${ramroot} " \
|
||||
"rootfstype=${ramrootfstype}\0" \
|
||||
"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
|
||||
"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
|
||||
"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"ramboot=echo Booting from ramdisk ...; " \
|
||||
"run ramargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"fdtfile=ti814x-evm.dtb\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
||||
"echo SD/MMC found on device ${mmcdev};" \
|
||||
"if run loadbootenv; then " \
|
||||
"echo Loaded environment from ${bootenv};" \
|
||||
"run importbootenv;" \
|
||||
"fi;" \
|
||||
"if test -n $uenvcmd; then " \
|
||||
"echo Running uenvcmd ...;" \
|
||||
"run uenvcmd;" \
|
||||
"fi;" \
|
||||
"if run loaduimage; then " \
|
||||
"run mmcboot;" \
|
||||
"fi;" \
|
||||
"fi;" \
|
||||
|
||||
/* Clock Defines */
|
||||
#define V_OSCK 24000000 /* Clock output from T2 */
|
||||
#define V_SCLK (V_OSCK >> 1)
|
||||
|
||||
#define CONFIG_CMD_ECHO
|
||||
|
||||
/* max number of command args */
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
|
||||
/* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_CBSIZE 512
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
|
||||
+ sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START PHYS_DRAM_1
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
|
||||
+ PHYS_DRAM_1_SIZE - (8 << 12))
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */
|
||||
#define CONFIG_SYS_HZ 1000 /* 1ms clock */
|
||||
|
||||
#define CONFIG_OMAP_GPIO
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_OMAP_HSMMC
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_EXT2
|
||||
|
||||
/**
|
||||
* Physical Memory Map
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 1 /* 1 banks of DRAM */
|
||||
#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
|
||||
#define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */
|
||||
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/**
|
||||
* Platform/Board specific defs
|
||||
*/
|
||||
#define CONFIG_SYS_TIMERBASE 0x4802E000
|
||||
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/* NS16550 Configuration */
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK (48000000)
|
||||
#define CONFIG_SYS_NS16550_COM1 0x48020000 /* Base EVM has UART0 */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET
|
||||
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
|
||||
/* Defines for SPL */
|
||||
#define CONFIG_SPL
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_TEXT_BASE 0x40300000
|
||||
#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
|
||||
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
|
||||
|
||||
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
|
||||
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
|
||||
|
||||
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
|
||||
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
|
||||
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
|
||||
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
|
||||
#define CONFIG_SPL_MMC_SUPPORT
|
||||
#define CONFIG_SPL_FAT_SUPPORT
|
||||
|
||||
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
||||
#define CONFIG_SPL_LIBDISK_SUPPORT
|
||||
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
||||
#define CONFIG_SPL_SERIAL_SUPPORT
|
||||
#define CONFIG_SPL_GPIO_SUPPORT
|
||||
#define CONFIG_SPL_YMODEM_SUPPORT
|
||||
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
|
||||
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
|
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
||||
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
|
||||
/*
|
||||
* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
|
||||
* 64 bytes before this address should be set aside for u-boot.img's
|
||||
* header. That is 0x800FFFC0--0x80800000 should not be used for any
|
||||
* other needs.
|
||||
*/
|
||||
#define CONFIG_SYS_TEXT_BASE 0x80800000
|
||||
#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
|
||||
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
|
||||
|
||||
/*
|
||||
* Since SPL did pll and ddr initialization for us,
|
||||
* we don't need to do it twice.
|
||||
*/
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
|
||||
/* Unsupported features */
|
||||
#undef CONFIG_USE_IRQ
|
||||
|
||||
#endif /* ! __CONFIG_TI814X_EVM_H */
|
||||
@ -84,7 +84,7 @@ LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
|
||||
LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
|
||||
LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o
|
||||
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
|
||||
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
|
||||
endif
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user