spi: Rename SPI_SUPPORT to SPI

Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2021-08-08 12:20:14 -06:00 committed by Tom Rini
parent 52510486c5
commit ea2ca7e17e
110 changed files with 116 additions and 117 deletions

View File

@ -824,7 +824,6 @@ libs-y += drivers/power/ \
drivers/power/pmic/ \
drivers/power/battery/ \
drivers/power/regulator/
libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/

View File

@ -261,7 +261,7 @@ config X86
imply SPL_LIBGENERIC_SUPPORT
imply SPL_SERIAL
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI_SUPPORT
imply SPL_SPI
imply SPL_OF_CONTROL
imply SPL_TIMER
imply SPL_REGMAP

View File

@ -990,7 +990,7 @@ config ARCH_SOCFPGA
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI_SUPPORT
imply SPL_SPI
imply L2X0_CACHE
config ARCH_SUNXI

View File

@ -31,7 +31,7 @@ void board_init_f(ulong dummy)
u32 spl_boot_device(void)
{
#if defined(CONFIG_SPL_SPI_SUPPORT)
#if defined(CONFIG_SPL_SPI)
return BOOT_DEVICE_SPI;
#elif defined(CONFIG_SPL_MMC)
return BOOT_DEVICE_MMC1;

View File

@ -282,7 +282,7 @@ config MVEBU_SPL_BOOT_DEVICE_SPI
imply SPL_DM_SPI
imply SPL_SPI_FLASH_SUPPORT
imply SPL_SPI_LOAD
imply SPL_SPI_SUPPORT
imply SPL_SPI
select SPL_BOOTROM_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_MMC

View File

@ -22,7 +22,7 @@ config SPL
imply SPL_BOOTSTAGE if BOOTSTAGE
imply SPL_DISPLAY_PRINT
imply SPL_LIBDISK_SUPPORT
imply SPL_SPI_LOAD if SPL_SPI_SUPPORT
imply SPL_SPI_LOAD if SPL_SPI
config SYS_SOC
default "stm32mp"

View File

@ -24,7 +24,7 @@ config SPL_SERIAL
config SPL_SPI_FLASH_SUPPORT
default y if ZYNQ_QSPI
config SPL_SPI_SUPPORT
config SPL_SPI
default y if ZYNQ_QSPI
config ZYNQ_DDRC_INIT

View File

@ -45,7 +45,7 @@ u32 spl_boot_device(void)
u32 mode;
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
case ZYNQ_BM_QSPI:
mode = BOOT_DEVICE_SPI;
break;

View File

@ -21,7 +21,7 @@ config SPL_SERIAL
config SPL_SPI_FLASH_SUPPORT
default y if ZYNQ_QSPI
config SPL_SPI_SUPPORT
config SPL_SPI
default y if ZYNQ_QSPI
config SYS_BOARD

View File

@ -104,7 +104,7 @@ u32 spl_boot_device(void)
case SW_SATA_MODE:
return BOOT_DEVICE_SATA;
#endif
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
case QSPI_MODE_24BIT:
case QSPI_MODE_32BIT:
return BOOT_DEVICE_SPI;

View File

@ -88,7 +88,7 @@ config CPU_ADDR_BITS
config APL_SPI_FLASH_BOOT
bool "Support booting with SPI-flash driver instead memory-mapped SPI"
select TPL_SPI_FLASH_SUPPORT
select TPL_SPI_SUPPORT
select TPL_SPI
select TPL_DM_SPI
select TPL_DM_SPI_FLASH
help

View File

@ -172,7 +172,7 @@ int board_mmc_getcd(struct mmc *mmc)
void spl_board_init(void)
{
#if defined(CONFIG_SPL_SPI_SUPPORT)
#if defined(CONFIG_SPL_SPI)
if (sc_rm_is_resource_owned(-1, SC_R_FSPI_0)) {
if (sc_pm_set_resource_power_mode(-1, SC_R_FSPI_0, SC_PM_PW_MODE_ON)) {
puts("Warning: failed to initialize FSPI0\n");
@ -185,7 +185,7 @@ void spl_board_init(void)
void spl_board_prepare_for_boot(void)
{
#if defined(CONFIG_SPL_SPI_SUPPORT)
#if defined(CONFIG_SPL_SPI)
if (sc_rm_is_resource_owned(-1, SC_R_FSPI_0)) {
if (sc_pm_set_resource_power_mode(-1, SC_R_FSPI_0, SC_PM_PW_MODE_OFF)) {
puts("Warning: failed to turn off FSPI0\n");

View File

@ -157,15 +157,15 @@ static void cl_som_imx7_spl_dram_cfg(void)
}
}
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
static void cl_som_imx7_spl_spi_init(void)
{
cl_som_imx7_espi1_pads_set();
}
#else /* !CONFIG_SPL_SPI_SUPPORT */
#else /* !CONFIG_SPL_SPI */
static void cl_som_imx7_spl_spi_init(void) {}
#endif /* CONFIG_SPL_SPI_SUPPORT */
#endif /* CONFIG_SPL_SPI */
void board_init_f(ulong dummy)
{

View File

@ -302,7 +302,7 @@ static void cm_fx6_setup_uart(void)
enable_uart_clk(1);
}
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
static void cm_fx6_setup_ecspi(void)
{
cm_fx6_set_ecspi_iomux();

View File

@ -273,7 +273,7 @@ static void spl_dram_init(void)
#endif
}
#ifdef CONFIG_SPL_SPI_SUPPORT
#ifdef CONFIG_SPL_SPI
static void displ5_init_ecspi(void)
{
displ5_set_iomux_ecspi_spl();

View File

@ -1119,7 +1119,7 @@ config SPL_SERIAL
unless there are space reasons not to. Even then, consider
enabling SPL_USE_TINY_PRINTF which is a small printf() version.
config SPL_SPI_SUPPORT
config SPL_SPI
bool "Support SPI drivers"
help
Enable support for using SPI in SPL. This is used for connecting
@ -1131,14 +1131,14 @@ config SPL_SPI_SUPPORT
config SPL_SPI_FLASH_SUPPORT
bool "Support SPI flash drivers"
depends on SPL_SPI_SUPPORT
depends on SPL_SPI
help
Enable support for using SPI flash in SPL, and loading U-Boot from
SPI flash. SPI flash (Serial Peripheral Bus flash) is named after
the SPI bus that is used to connect it to a system. It is a simple
but fast bidirectional 4-wire bus (clock, chip select and two data
lines). This enables the drivers in drivers/mtd/spi as part of an
SPL build. This normally requires SPL_SPI_SUPPORT.
SPL build. This normally requires SPL_SPI.
if SPL_SPI_FLASH_SUPPORT
@ -1602,10 +1602,10 @@ config TPL_SPI_LOAD
Enable support for loading next stage, U-Boot or otherwise, from
SPI NOR in U-Boot TPL.
config TPL_SPI_SUPPORT
config TPL_SPI
bool "Support SPI drivers"
help
Enable support for using SPI in TPL. See SPL_SPI_SUPPORT for
Enable support for using SPI in TPL. See SPL_SPI for
details.
config TPL_DM_SPI

View File

@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_PHYS_64BIT=y

View File

@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
CONFIG_FIT=y

View File

@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_PHYS_64BIT=y

View File

@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
CONFIG_FIT=y

View File

@ -11,7 +11,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y

View File

@ -11,7 +11,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PC=y

View File

@ -11,7 +11,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P1020RDB_PD=y

View File

@ -11,7 +11,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y

View File

@ -11,7 +11,7 @@ CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_P2020RDB=y

View File

@ -14,7 +14,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1024RDB=y
CONFIG_FIT=y

View File

@ -11,7 +11,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042D4RDB=y
CONFIG_FIT=y

View File

@ -12,7 +12,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
CONFIG_FIT=y

View File

@ -13,7 +13,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080RDB=y
CONFIG_FIT=y

View File

@ -13,7 +13,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080RDB=y
CONFIG_T2080RDB_REV_D=y

View File

@ -23,7 +23,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3

View File

@ -9,7 +9,7 @@ CONFIG_AM33XX=y
# CONFIG_SPL_MMC is not set
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_BOARD_SETUP=y

View File

@ -12,7 +12,7 @@ CONFIG_TARGET_AM57XX_EVM=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x280000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ARMV7_LPAE=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y

View File

@ -15,7 +15,7 @@ CONFIG_TARGET_AM57XX_EVM=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x280000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ARMV7_LPAE=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y

View File

@ -17,7 +17,7 @@ CONFIG_TARGET_AM57XX_EVM=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x280000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ARMV7_LPAE=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y

View File

@ -21,7 +21,7 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y

View File

@ -22,7 +22,7 @@ CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
# CONFIG_DISPLAY_CPUINFO is not set

View File

@ -22,7 +22,7 @@ CONFIG_ENV_OFFSET_REDUND=0x6A0000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_PSCI_RESET is not set
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

View File

@ -23,7 +23,7 @@ CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x2000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set

View File

@ -23,7 +23,7 @@ CONFIG_ENV_OFFSET_REDUND=0x6A0000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_PSCI_RESET is not set
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

View File

@ -22,7 +22,7 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y

View File

@ -11,7 +11,7 @@ CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ZYNQ_MAC_IN_EEPROM=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa
CONFIG_DEBUG_UART=y

View File

@ -25,7 +25,7 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=18432000
CONFIG_ENV_OFFSET_REDUND=0x180000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068"

View File

@ -18,7 +18,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x30000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_EXPERT is not set
CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_FIT is not set

View File

@ -21,7 +21,7 @@ CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
CONFIG_SPL=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_CMD_BMODE is not set
# CONFIG_EXPERT is not set
CONFIG_SYS_LOAD_ADDR=0x10700000

View File

@ -19,7 +19,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x30000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_EXPERT is not set
CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_FIT is not set

View File

@ -13,7 +13,7 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800

View File

@ -14,7 +14,7 @@ CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
CONFIG_DEBUG_UART_BASE=0xff1a0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"

View File

@ -12,7 +12,7 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800

View File

@ -13,7 +13,7 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800

View File

@ -13,7 +13,7 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800

View File

@ -16,7 +16,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y

View File

@ -20,7 +20,7 @@ CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_CMD_BMODE is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y

View File

@ -19,7 +19,7 @@ CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y

View File

@ -20,7 +20,7 @@ CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_LTO=y
CONFIG_SYS_LOAD_ADDR=0xc0700000
CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"

View File

@ -18,7 +18,7 @@ CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_LTO=y
CONFIG_SYS_LOAD_ADDR=0xc0700000
CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"

View File

@ -25,7 +25,7 @@ CONFIG_SPL=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_ENV_OFFSET_REDUND=0x110000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y

View File

@ -27,7 +27,7 @@ CONFIG_SPL=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_ENV_OFFSET_REDUND=0x130000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set

View File

@ -24,7 +24,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x130000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set

View File

@ -12,7 +12,7 @@ CONFIG_TARGET_DRA7XX_EVM=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x280000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ARMV7_LPAE=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y

View File

@ -15,7 +15,7 @@ CONFIG_TARGET_DRA7XX_EVM=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x280000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ARMV7_LPAE=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y

View File

@ -17,7 +17,7 @@ CONFIG_TARGET_DRA7XX_EVM=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x280000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ARMV7_LPAE=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y

View File

@ -21,7 +21,7 @@ CONFIG_ENV_OFFSET_REDUND=0x2E0000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3

View File

@ -22,7 +22,7 @@ CONFIG_ENV_OFFSET_REDUND=0xB80000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3

View File

@ -16,7 +16,7 @@ CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xFF1c0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_ANDROID_BOOT_IMAGE=y

View File

@ -22,7 +22,7 @@ CONFIG_DEBUG_UART_BASE=0x21ec000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y

View File

@ -23,7 +23,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3

View File

@ -19,7 +19,7 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x90000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_FIT=y

View File

@ -22,7 +22,7 @@ CONFIG_ENV_OFFSET_REDUND=0x6A0000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_PSCI_RESET is not set
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

View File

@ -20,7 +20,7 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000

View File

@ -22,7 +22,7 @@ CONFIG_ENV_OFFSET_REDUND=0x6A0000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_PSCI_RESET is not set
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

View File

@ -20,7 +20,7 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000

View File

@ -21,7 +21,7 @@ CONFIG_ENV_OFFSET_REDUND=0x700000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_PSCI_RESET is not set
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

View File

@ -22,7 +22,7 @@ CONFIG_ENV_OFFSET_REDUND=0x700000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000

View File

@ -19,7 +19,7 @@ CONFIG_DEFAULT_DEVICE_TREE="keystone-k2e-evm"
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_USE_BOOTCOMMAND is not set

View File

@ -18,7 +18,7 @@ CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm"
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_USE_BOOTCOMMAND is not set

View File

@ -19,7 +19,7 @@ CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm"
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_USE_BOOTCOMMAND is not set

View File

@ -19,7 +19,7 @@ CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm"
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_USE_BOOTCOMMAND is not set

View File

@ -23,7 +23,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3

View File

@ -17,7 +17,7 @@ CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x3f0000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_PSCI_RESET is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y

View File

@ -23,7 +23,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3

View File

@ -15,7 +15,7 @@ CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xFF180000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_FIT=y

View File

@ -22,7 +22,7 @@ CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x110000
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y

View File

@ -10,7 +10,7 @@ CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_BOOTDELAY=3

View File

@ -23,7 +23,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3

View File

@ -13,7 +13,7 @@ CONFIG_TARGET_PUMA_RK3399=y
CONFIG_DEBUG_UART_BASE=0xFF180000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"

View File

@ -20,7 +20,7 @@ CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3

View File

@ -21,7 +21,7 @@ CONFIG_ENV_OFFSET_REDUND=0x2E0000
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3

View File

@ -13,7 +13,7 @@ CONFIG_TARGET_ROC_PC_RK3399=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set

View File

@ -13,7 +13,7 @@ CONFIG_TARGET_ROC_PC_RK3399=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set

View File

@ -11,7 +11,7 @@ CONFIG_TARGET_ROCKPRO64_RK3399=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_USE_PREBOOT=y

View File

@ -20,7 +20,7 @@ CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3

View File

@ -19,7 +19,7 @@ CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xf801c000
CONFIG_DEBUG_UART_CLOCK=82000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x22000000

View File

@ -23,7 +23,7 @@ CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xf8020000
CONFIG_DEBUG_UART_CLOCK=83000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x22000000

View File

@ -23,7 +23,7 @@ CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x22000000

View File

@ -23,7 +23,7 @@ CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xfc00c000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x22000000

View File

@ -23,7 +23,7 @@ CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xfc00c000
CONFIG_DEBUG_UART_CLOCK=88000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0x22000000

View File

@ -8,7 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
CONFIG_SPL_MMC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_TARGET_SIFIVE_UNLEASHED=y
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y

View File

@ -7,7 +7,7 @@ CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="hifive-unmatched-a00"
CONFIG_SPL_MMC=y
CONFIG_SPL=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_TARGET_SIFIVE_UNMATCHED=y
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y

View File

@ -23,7 +23,7 @@ CONFIG_SPL_SERIAL=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3

Some files were not shown because too many files have changed in this diff Show More