mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-13 14:53:28 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge git://www.denx.de/git/u-boot-imx

Browse Source
This commit is contained in:
Tom Rini 2017-09-20 12:32:34 -04:00
commit e884656c2c
26 changed files with 474 additions and 80 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/arm/include/asm/arch-mx6/sys_proto.h
View File

@ -6,3 +6,10 @@
*/
#include <asm/mach-imx/sys_proto.h>
#define USBPHY_PWD 0x00000000
#define USBPHY_PWD_RXPWDRX (1 << 20) /* receiver block power down */
#define is_usbotg_phy_active(void) (!(readl(USB_PHY0_BASE_ADDR + USBPHY_PWD) & \
USBPHY_PWD_RXPWDRX))

6
arch/arm/include/asm/arch-mx7/clock.h
View File

@ -318,9 +318,9 @@ struct clk_root_map {
};
enum enet_freq {
ENET_25MHz,
ENET_50MHz,
ENET_125MHz,
ENET_25MHZ,
ENET_50MHZ,
ENET_125MHZ,
};
u32 get_root_clk(enum clk_root_index clock_id);

6
arch/arm/mach-imx/mx7/clock.c
View File

@ -966,15 +966,15 @@ int set_clk_enet(enum enet_freq type)
clock_enable(CCGR_ENET2, 0);
switch (type) {
case ENET_125MHz:
case ENET_125MHZ:
enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
break;
case ENET_50MHz:
case ENET_50MHZ:
enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
break;
case ENET_25MHz:
case ENET_25MHZ:
enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
break;

22
arch/arm/mach-imx/spl.c
View File

@ -14,6 +14,7 @@
#include <asm/spl.h>
#include <spl.h>
#include <asm/mach-imx/hab.h>
#include <g_dnl.h>
DECLARE_GLOBAL_DATA_PTR;
@ -31,6 +32,18 @@ u32 spl_boot_device(void)
if (((bmode >> 24) & 0x03) == 0x01) /* Serial Downloader */
return BOOT_DEVICE_BOARD;
/*
* The above method does not detect that the boot ROM used
* serial downloader in case the boot ROM decided to use the
* serial downloader as a fall back (primary boot source failed).
*
* Infer that the boot ROM used the USB serial downloader by
* checking whether the USB PHY is currently active... This
* assumes that SPL did not (yet) initialize the USB PHY...
*/
if (is_usbotg_phy_active())
return BOOT_DEVICE_BOARD;
/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
switch ((reg & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
/* EIM: See 8.5.1, Table 8-9 */
@ -82,6 +95,15 @@ u32 spl_boot_device(void)
}
return BOOT_DEVICE_NONE;
}
#ifdef CONFIG_SPL_USB_GADGET_SUPPORT
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
{
put_unaligned(CONFIG_G_DNL_PRODUCT_NUM + 0xfff, &dev->idProduct);
return 0;
}
#endif
#endif
#if defined(CONFIG_SPL_MMC_SUPPORT)

6
board/bachmann/ot1200/ot1200_spl.c
View File

@ -151,10 +151,4 @@ void board_init_f(ulong dummy)
/* configure MMDC for SDRAM width/size and per-model calibration */
ot1200_spl_dram_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}

3
board/compulab/cm_fx6/spl.c
View File

@ -336,9 +336,6 @@ void board_init_f(ulong dummy)
puts("!!!ERROR!!! DRAM detection failed!!!\n");
hang();
}
memset(__bss_start, 0, __bss_end - __bss_start);
board_init_r(NULL, 0);
}
void board_boot_order(u32 *spl_boot_list)

6
board/engicam/common/spl.c
View File

@ -384,10 +384,4 @@ void board_init_f(ulong dummy)
/* DDR initialization */
spl_dram_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}

2
board/freescale/mx7dsabresd/mx7dsabresd.c
View File

@ -260,7 +260,7 @@ static int setup_fec(void)
(IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK |
IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0);
return set_clk_enet(ENET_125MHz);
return set_clk_enet(ENET_125MHZ);
}

3
board/gateworks/gw_ventana/gw_ventana_spl.c
View File

@ -626,9 +626,6 @@ void board_init_f(ulong dummy)
spl_dram_init(8 << ventana_info.sdram_width,
16 << ventana_info.sdram_size,
board_model);
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
}
void board_boot_order(u32 *spl_boot_list)

2
board/ge/bx50v3/Makefile
View File

@ -5,4 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := bx50v3.o
obj-y := bx50v3.o vpd_reader.o

109
board/ge/bx50v3/bx50v3.c
View File

@ -26,8 +26,19 @@
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <pwm.h>
#include <stdlib.h>
#include "vpd_reader.h"
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SYS_I2C_EEPROM_ADDR
# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#endif
#ifndef CONFIG_SYS_I2C_EEPROM_BUS
#define CONFIG_SYS_I2C_EEPROM_BUS 2
#endif
#define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_HYS)
@ -528,6 +539,102 @@ int overwrite_console(void)
return 1;
}
#define VPD_TYPE_INVALID 0x00
#define VPD_BLOCK_NETWORK 0x20
#define VPD_BLOCK_HWID 0x44
#define VPD_PRODUCT_B850 1
#define VPD_PRODUCT_B650 2
#define VPD_PRODUCT_B450 3
struct vpd_cache {
uint8_t product_id;
uint8_t macbits;
unsigned char mac1[6];
};
/*
* Extracts MAC and product information from the VPD.
*/
static int vpd_callback(
void *userdata,
uint8_t id,
uint8_t version,
uint8_t type,
size_t size,
uint8_t const *data)
{
struct vpd_cache *vpd = (struct vpd_cache *)userdata;
if ( id == VPD_BLOCK_HWID
&& version == 1
&& type != VPD_TYPE_INVALID
&& size >= 1) {
vpd->product_id = data[0];
} else if ( id == VPD_BLOCK_NETWORK
&& version == 1
&& type != VPD_TYPE_INVALID
&& size >= 6) {
vpd->macbits |= 1;
memcpy(vpd->mac1, data, 6);
}
return 0;
}
static void set_eth0_mac_address(unsigned char * mac)
{
uint32_t *ENET_TCR = (uint32_t*)0x21880c4;
uint32_t *ENET_PALR = (uint32_t*)0x21880e4;
uint32_t *ENET_PAUR = (uint32_t*)0x21880e8;
*ENET_TCR |= 0x100; /* ADDINS */
*ENET_PALR |= (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
*ENET_PAUR |= (mac[4] << 24) | (mac[5] << 16);
}
static void process_vpd(struct vpd_cache *vpd)
{
if ( vpd->product_id == VPD_PRODUCT_B850
|| vpd->product_id == VPD_PRODUCT_B650
|| vpd->product_id == VPD_PRODUCT_B450) {
if (vpd->macbits & 1) {
set_eth0_mac_address(vpd->mac1);
}
}
}
static int read_vpd(uint eeprom_bus)
{
struct vpd_cache vpd;
int res;
int size = 1024;
uint8_t *data;
unsigned int current_i2c_bus = i2c_get_bus_num();
res = i2c_set_bus_num(eeprom_bus);
if (res < 0)
return res;
data = (uint8_t *)malloc(size);
if (!data)
return -ENOMEM;
res = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, data, size);
if (res == 0) {
memset(&vpd, 0, sizeof(vpd));
vpd_reader(size, data, &vpd, vpd_callback);
process_vpd(&vpd);
}
free(data);
i2c_set_bus_num(current_i2c_bus);
return res;
}
int board_eth_init(bd_t *bis)
{
setup_iomux_enet();
@ -586,6 +693,8 @@ int board_init(void)
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
read_vpd(CONFIG_SYS_I2C_EEPROM_BUS);
return 0;
}

228
board/ge/bx50v3/vpd_reader.c Normal file
View File

@ -0,0 +1,228 @@
/*
* Copyright 2016 General Electric Company
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "vpd_reader.h"
#include <linux/bch.h>
#include <stdlib.h>
/* BCH configuration */
const struct {
int header_ecc_capability_bits;
int data_ecc_capability_bits;
unsigned int prim_poly;
struct {
int min;
int max;
} galois_field_order;
} bch_configuration = {
.header_ecc_capability_bits = 4,
.data_ecc_capability_bits = 16,
.prim_poly = 0,
.galois_field_order = {
.min = 5,
.max = 15,
},
};
static int calculate_galois_field_order(size_t source_length)
{
int gfo = bch_configuration.galois_field_order.min;
for (; gfo < bch_configuration.galois_field_order.max &&
((((1 << gfo) - 1) - ((int)source_length * 8)) < 0);
gfo++) {
}
if (gfo == bch_configuration.galois_field_order.max) {
return -1;
}
return gfo + 1;
}
static int verify_bch(int ecc_bits, unsigned int prim_poly,
uint8_t * data, size_t data_length,
const uint8_t * ecc, size_t ecc_length)
{
int gfo = calculate_galois_field_order(data_length);
if (gfo < 0) {
return -1;
}
struct bch_control * bch = init_bch(gfo, ecc_bits, prim_poly);
if (!bch) {
return -1;
}
if (bch->ecc_bytes != ecc_length) {
free_bch(bch);
return -1;
}
unsigned * errloc = (unsigned *)calloc(data_length, sizeof(unsigned));
int errors = decode_bch(
bch, data, data_length, ecc, NULL, NULL, errloc);
free_bch(bch);
if (errors < 0) {
free(errloc);
return -1;
}
if (errors > 0) {
for (int n = 0; n < errors; n++) {
if (errloc[n] >= 8 * data_length) {
/* n-th error located in ecc (no need for data correction) */
} else {
/* n-th error located in data */
data[errloc[n] / 8] ^= 1 << (errloc[n] % 8);
}
}
}
free(errloc);
return 0;
}
static const int ID = 0;
static const int LEN = 1;
static const int VER = 2;
static const int TYP = 3;
static const int BLOCK_SIZE = 4;
static const uint8_t HEADER_BLOCK_ID = 0x00;
static const uint8_t HEADER_BLOCK_LEN = 18;
static const uint32_t HEADER_BLOCK_MAGIC = 0xca53ca53;
static const size_t HEADER_BLOCK_VERIFY_LEN = 14;
static const size_t HEADER_BLOCK_ECC_OFF = 14;
static const size_t HEADER_BLOCK_ECC_LEN = 4;
static const uint8_t ECC_BLOCK_ID = 0xFF;
int vpd_reader(
size_t size,
uint8_t * data,
void * userdata,
int (*fn)(
void * userdata,
uint8_t id,
uint8_t version,
uint8_t type,
size_t size,
uint8_t const * data))
{
if ( size < HEADER_BLOCK_LEN
|| data == NULL
|| fn == NULL) {
return -EINVAL;
}
/*
* +--------------------+--------------------+--//--+--------------------+
* | header block | data block | ... | ecc block |
* +--------------------+--------------------+--//--+--------------------+
* : : :
* +------+-------+-----+ +------+-------------+
* | id | magic | ecc | | ... | ecc |
* | len | off | | +------+-------------+
* | ver | size | | :
* | type | | | :
* +------+-------+-----+ :
* : : : :
* <----- [1] ----> <----------- [2] ----------->
*
* Repair (if necessary) the contents of header block [1] by using a
* 4 byte ECC located at the end of the header block. A successful
* return value means that we can trust the header.
*/
int ret = verify_bch(
bch_configuration.header_ecc_capability_bits,
bch_configuration.prim_poly,
data,
HEADER_BLOCK_VERIFY_LEN,
&data[HEADER_BLOCK_ECC_OFF],
HEADER_BLOCK_ECC_LEN);
if (ret < 0) {
return ret;
}
/* Validate header block { id, length, version, type }. */
if ( data[ID] != HEADER_BLOCK_ID
|| data[LEN] != HEADER_BLOCK_LEN
|| data[VER] != 0
|| data[TYP] != 0
|| ntohl(*(uint32_t *)(&data[4])) != HEADER_BLOCK_MAGIC) {
return -EINVAL;
}
uint32_t offset = ntohl(*(uint32_t *)(&data[8]));
uint16_t size_bits = ntohs(*(uint16_t *)(&data[12]));
/* Check that ECC header fits. */
if (offset + 3 >= size) {
return -EINVAL;
}
/* Validate ECC block. */
uint8_t * ecc = &data[offset];
if ( ecc[ID] != ECC_BLOCK_ID
|| ecc[LEN] < BLOCK_SIZE
|| ecc[LEN] + offset > size
|| ecc[LEN] - BLOCK_SIZE != size_bits / 8
|| ecc[VER] != 1
|| ecc[TYP] != 1) {
return -EINVAL;
}
/*
* Use the header block to locate the ECC block and verify the data
* blocks [2] against the ecc block ECC.
*/
ret = verify_bch(
bch_configuration.data_ecc_capability_bits,
bch_configuration.prim_poly,
&data[data[LEN]],
offset - data[LEN],
&data[offset + BLOCK_SIZE],
ecc[LEN] - BLOCK_SIZE);
if (ret < 0) {
return ret;
}
/* Stop after ECC. Ignore possible zero padding. */
size = offset;
for (;;) {
/* Move to next block. */
size -= data[LEN];
data += data[LEN];
if (size == 0) {
/* Finished iterating through blocks. */
return 0;
}
if ( size < BLOCK_SIZE
|| data[LEN] < BLOCK_SIZE) {
/* Not enough data for a header, or short header. */
return -EINVAL;
}
ret = fn(
userdata,
data[ID],
data[VER],
data[TYP],
data[LEN] - BLOCK_SIZE,
&data[BLOCK_SIZE]);
if (ret) {
return ret;
}
}
}

25
board/ge/bx50v3/vpd_reader.h Normal file
View File

@ -0,0 +1,25 @@
/*
* Copyright 2016 General Electric Company
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "common.h"
/*
* Read VPD from given data, verify content, and call callback
* for each vital product data block.
*
* Returns Non-zero on error. Negative numbers encode errno.
*/
int vpd_reader(
size_t size,
uint8_t * data,
void * userdata,
int (*fn)(
void * userdata,
uint8_t id,
uint8_t version,
uint8_t type,
size_t size,
uint8_t const * data));

6
board/kosagi/novena/novena_spl.c
View File

@ -596,10 +596,4 @@ void board_init_f(ulong dummy)
udelay(100);
mmdc_do_write_level_calibration(&novena_ddr_info);
mmdc_do_dqs_calibration(&novena_ddr_info);
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}

6
board/liebherr/mccmon6/spl.c
View File

@ -296,11 +296,5 @@ void board_init_f(ulong dummy)
/* DDR initialization */
spl_dram_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}
#endif

35
board/solidrun/mx6cuboxi/mx6cuboxi.c
View File

@ -349,6 +349,7 @@ static bool is_hummingboard(void)
* Machine selection -
* Machine val1, val2
* -------------------------
* HB2 x x
* HB rev 3.x x 0
* CBi 0 1
* HB 1 1
@ -362,9 +363,37 @@ static bool is_hummingboard(void)
return true;
}
static bool is_hummingboard2(void)
{
int val1;
SETUP_IOMUX_PADS(hb_cbi_sense);
gpio_direction_input(IMX_GPIO_NR(2, 8));
val1 = gpio_get_value(IMX_GPIO_NR(2, 8));
/*
* Machine selection -
* Machine val1
* -------------------
* HB2 0
* HB rev 3.x x
* CBi x
* HB x
*/
if (val1 == 0)
return true;
else
return false;
}
int checkboard(void)
{
if (is_hummingboard())
if (is_hummingboard2())
puts("Board: MX6 Hummingboard2\n");
else if (is_hummingboard())
puts("Board: MX6 Hummingboard\n");
else
puts("Board: MX6 Cubox-i\n");
@ -375,7 +404,9 @@ int checkboard(void)
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (is_hummingboard())
if (is_hummingboard2())
env_set("board_name", "HUMMINGBOARD2");
else if (is_hummingboard())
env_set("board_name", "HUMMINGBOARD");
else
env_set("board_name", "CUBOXI");

17
board/technexion/pico-imx7d/README
View File

@ -47,3 +47,20 @@ Remove power from the pico board.
Put pico board into normal boot mode.
Power up the board and the new updated U-Boot should boot from eMMC.
Building U-Boot to boot with NXP 4.1 kernel:
The NXP 4.1 kernel boots only in secure boot mode on mx7.
Follow the next steps to enable secure boot:
$ make mrproper
$ make pico-imx7d_defconfig
$ make menuconfig
-> ARM architecture
-> [*] Enable support for booting in non-secure mode
-> [*] Boot in secure mode by default
-> Exit
$ make
Flash u-boot.imx using the imx_usb_loader tool.

2
board/technexion/pico-imx7d/pico-imx7d.c
View File

@ -182,7 +182,7 @@ static int setup_fec(void)
(IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK |
IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0);
return set_clk_enet(ENET_125MHz);
return set_clk_enet(ENET_125MHZ);
}
int board_phy_config(struct phy_device *phydev)

13
board/toradex/apalis_imx6/apalis_imx6.c
View File

@ -29,7 +29,6 @@
#include <dm/platform_data/serial_mxc.h>
#include <dm/platdata.h>
#include <fsl_esdhc.h>
#include <g_dnl.h>
#include <i2c.h>
#include <imx_thermal.h>
#include <linux/errno.h>
@ -1224,18 +1223,6 @@ void reset_cpu(ulong addr)
{
}
#ifdef CONFIG_SPL_USB_GADGET_SUPPORT
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
{
unsigned short usb_pid;
usb_pid = TORADEX_USB_PRODUCT_NUM_OFFSET + 0xfff;
put_unaligned(usb_pid, &dev->idProduct);
return 0;
}
#endif
#endif
static struct mxc_serial_platdata mxc_serial_plat = {

13
board/toradex/colibri_imx6/colibri_imx6.c
View File

@ -28,7 +28,6 @@
#include <dm/platform_data/serial_mxc.h>
#include <dm/platdata.h>
#include <fsl_esdhc.h>
#include <g_dnl.h>
#include <i2c.h>
#include <imx_thermal.h>
#include <linux/errno.h>
@ -1108,18 +1107,6 @@ void reset_cpu(ulong addr)
{
}
#ifdef CONFIG_SPL_USB_GADGET_SUPPORT
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
{
unsigned short usb_pid;
usb_pid = TORADEX_USB_PRODUCT_NUM_OFFSET + 0xfff;
put_unaligned(usb_pid, &dev->idProduct);
return 0;
}
#endif
#endif
static struct mxc_serial_platdata mxc_serial_plat = {

2
board/toradex/colibri_imx7/colibri_imx7.c
View File

@ -280,7 +280,7 @@ static int setup_fec(void)
IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK);
#endif
return set_clk_enet(ENET_50MHz);
return set_clk_enet(ENET_50MHZ);
}
int board_phy_config(struct phy_device *phydev)

6
board/udoo/udoo_spl.c
View File

@ -252,11 +252,5 @@ void board_init_f(ulong dummy)
/* DDR initialization */
spl_dram_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}
#endif

6
board/wandboard/spl.c
View File

@ -300,11 +300,5 @@ void board_init_f(ulong dummy)
/* DDR initialization */
spl_dram_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}
#endif

4
configs/mx6sabresd_defconfig
View File

@ -18,6 +18,9 @@ CONFIG_SPL=y
CONFIG_SPL_EXT_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET_SUPPORT=y
CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
@ -31,6 +34,7 @@ CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y

15
include/configs/ge_bx50v3.h
View File

@ -299,4 +299,19 @@
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_SYS_NUM_I2C_BUSES 9
#define CONFIG_SYS_I2C_MAX_HOPS 1
#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
{0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
{0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
{0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
}
#define CONFIG_BCH
#endif /* __GE_BX50V3_CONFIG_H */

4
include/configs/mx6cuboxi.h
View File

@ -106,6 +106,10 @@
"fi; " \
"fi\0" \
"findfdt="\
"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \
"setenv fdtfile imx6q-hummingboard2.dtb; fi; " \
"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \
"setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \
"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \