mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-26 21:54:37 +08:00
Code Issues Packages Projects Releases Wiki Activity

gpio: zynq: Remove non driver model code

Browse Source 
Remove non driver model support as it moved
to driver model. Dont need non driver model
anymore.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This commit is contained in:
Siva Durga Prasad Paladugu 2016-03-10 16:27:40 +05:30 committed by Michal Simek
parent 2978ae23fa
commit de77a03bf2
2 changed files with 1 additions and 159 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/mach-zynq/include/mach/gpio.h
View File

@ -8,8 +8,6 @@
#ifndef _ZYNQ_GPIO_H
#define _ZYNQ_GPIO_H
#define ZYNQ_GPIO_BASE_ADDRESS 0xE000A000
/* Maximum banks */
#define ZYNQ_GPIO_MAX_BANK 4

158
drivers/gpio/zynq_gpio.c
View File

@ -13,8 +13,6 @@
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/errno.h>
#ifdef CONFIG_DM_GPIO
#include <dm.h>
#include <fdtdec.h>
@ -23,7 +21,6 @@ DECLARE_GLOBAL_DATA_PTR;
struct zynq_gpio_privdata {
phys_addr_t base;
};
#endif
/**
* zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
@ -65,7 +62,7 @@ static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
}
}
int gpio_is_valid(unsigned gpio)
static int gpio_is_valid(unsigned gpio)
{
return (gpio >= 0) && (gpio < ZYNQ_GPIO_NR_GPIOS);
}
@ -79,158 +76,6 @@ static int check_gpio(unsigned gpio)
return 0;
}
#ifndef CONFIG_DM_GPIO
/**
* gpio_get_value - Get the state of the specified pin of GPIO device
* @gpio: gpio pin number within the device
*
* This function reads the state of the specified pin of the GPIO device.
*
* Return: 0 if the pin is low, 1 if pin is high.
*/
int gpio_get_value(unsigned gpio)
{
u32 data;
unsigned int bank_num, bank_pin_num;
if (check_gpio(gpio) < 0)
return -1;
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
data = readl(ZYNQ_GPIO_BASE_ADDRESS +
ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
return (data >> bank_pin_num) & 1;
}
/**
* gpio_set_value - Modify the value of the pin with specified value
* @gpio: gpio pin number within the device
* @value: value used to modify the value of the specified pin
*
* This function calculates the register offset (i.e to lower 16 bits or
* upper 16 bits) based on the given pin number and sets the value of a
* gpio pin to the specified value. The value is either 0 or non-zero.
*/
int gpio_set_value(unsigned gpio, int value)
{
unsigned int reg_offset, bank_num, bank_pin_num;
if (check_gpio(gpio) < 0)
return -1;
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
/* only 16 data bits in bit maskable reg */
bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM;
reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num);
} else {
reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num);
}
/*
* get the 32 bit value to be written to the mask/data register where
* the upper 16 bits is the mask and lower 16 bits is the data
*/
value = !!value;
value = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) &
((value << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK);
writel(value, ZYNQ_GPIO_BASE_ADDRESS + reg_offset);
return 0;
}
/**
* gpio_direction_input - Set the direction of the specified GPIO pin as input
* @gpio: gpio pin number within the device
*
* This function uses the read-modify-write sequence to set the direction of
* the gpio pin as input.
*
* Return: -1 if invalid gpio specified, 0 if successul
*/
int gpio_direction_input(unsigned gpio)
{
u32 reg;
unsigned int bank_num, bank_pin_num;
if (check_gpio(gpio) < 0)
return -1;
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
/* bank 0 pins 7 and 8 are special and cannot be used as inputs */
if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
return -1;
/* clear the bit in direction mode reg to set the pin as input */
reg = readl(ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
reg &= ~BIT(bank_pin_num);
writel(reg, ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
return 0;
}
/**
* gpio_direction_output - Set the direction of the specified GPIO pin as output
* @gpio: gpio pin number within the device
* @value: value to be written to specified pin
*
* This function sets the direction of specified GPIO pin as output, configures
* the Output Enable register for the pin and uses zynq_gpio_set to set
* the value of the pin to the value specified.
*
* Return: 0 always
*/
int gpio_direction_output(unsigned gpio, int value)
{
u32 reg;
unsigned int bank_num, bank_pin_num;
if (check_gpio(gpio) < 0)
return -1;
zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
/* set the GPIO pin as output */
reg = readl(ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
reg |= BIT(bank_pin_num);
writel(reg, ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
/* configure the output enable reg for the pin */
reg = readl(ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
reg |= BIT(bank_pin_num);
writel(reg, ZYNQ_GPIO_BASE_ADDRESS + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
/* set the state of the pin */
gpio_set_value(gpio, value);
return 0;
}
/**
* Request a gpio before using it.
*
* NOTE: Argument 'label' is unused.
*/
int gpio_request(unsigned gpio, const char *label)
{
if (check_gpio(gpio) < 0)
return -1;
return 0;
}
/**
* Reset and free the gpio after using it.
*/
int gpio_free(unsigned gpio)
{
return 0;
}
#else
static int zynq_gpio_get_value(struct udevice *dev, unsigned gpio)
{
u32 data;
@ -368,4 +213,3 @@ U_BOOT_DRIVER(gpio_zynq) = {
.probe = zynq_gpio_probe,
.priv_auto_alloc_size = sizeof(struct zynq_gpio_privdata),
};
#endif