mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 04:34:22 +08:00
arm: socfpga: Restructure clock manager driver
Restructure clock manager driver in the preparation to support A10. Move the Gen5 specific code to _gen5 files. - Change all uint32_t to u32 and change to use macro BIT(n) for bit shift. - Check return value from wait_for_bit(). So change return type to int for cm_write_with_phase() and cm_basic_init(). Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
This commit is contained in:
Ley Foon Tan
Marek Vasut
parent
fa8967cfba
commit
de77811589
@ -13,7 +13,8 @@ obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
|
||||
obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
|
||||
|
||||
# QTS-generated config file wrappers
|
||||
obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o
|
||||
obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o \
|
||||
clock_manager_gen5.o
|
||||
obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o \
|
||||
wrap_sdram_config.o
|
||||
CFLAGS_wrap_iocsr_config.o += -I$(srctree)/board/$(BOARDDIR)
|
||||
|
||||
@ -1,10 +1,11 @@
|
||||
/*
|
||||
* Copyright (C) 2013 Altera Corporation <www.altera.com>
|
||||
* Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <wait_bit.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/clock_manager.h>
|
||||
|
||||
@ -13,10 +14,10 @@ DECLARE_GLOBAL_DATA_PTR;
|
||||
static const struct socfpga_clock_manager *clock_manager_base =
|
||||
(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
|
||||
|
||||
static void cm_wait_for_lock(uint32_t mask)
|
||||
void cm_wait_for_lock(u32 mask)
|
||||
{
|
||||
register uint32_t inter_val;
|
||||
uint32_t retry = 0;
|
||||
u32 inter_val;
|
||||
u32 retry = 0;
|
||||
do {
|
||||
inter_val = readl(&clock_manager_base->inter) & mask;
|
||||
if (inter_val == mask)
|
||||
@ -29,510 +30,10 @@ static void cm_wait_for_lock(uint32_t mask)
|
||||
}
|
||||
|
||||
/* function to poll in the fsm busy bit */
|
||||
static void cm_wait_for_fsm(void)
|
||||
int cm_wait_for_fsm(void)
|
||||
{
|
||||
while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
|
||||
;
|
||||
}
|
||||
|
||||
/*
|
||||
* function to write the bypass register which requires a poll of the
|
||||
* busy bit
|
||||
*/
|
||||
static void cm_write_bypass(uint32_t val)
|
||||
{
|
||||
writel(val, &clock_manager_base->bypass);
|
||||
cm_wait_for_fsm();
|
||||
}
|
||||
|
||||
/* function to write the ctrl register which requires a poll of the busy bit */
|
||||
static void cm_write_ctrl(uint32_t val)
|
||||
{
|
||||
writel(val, &clock_manager_base->ctrl);
|
||||
cm_wait_for_fsm();
|
||||
}
|
||||
|
||||
/* function to write a clock register that has phase information */
|
||||
static void cm_write_with_phase(uint32_t value,
|
||||
uint32_t reg_address, uint32_t mask)
|
||||
{
|
||||
/* poll until phase is zero */
|
||||
while (readl(reg_address) & mask)
|
||||
;
|
||||
|
||||
writel(value, reg_address);
|
||||
|
||||
while (readl(reg_address) & mask)
|
||||
;
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup clocks while making no assumptions about previous state of the clocks.
|
||||
*
|
||||
* Start by being paranoid and gate all sw managed clocks
|
||||
* Put all plls in bypass
|
||||
* Put all plls VCO registers back to reset value (bandgap power down).
|
||||
* Put peripheral and main pll src to reset value to avoid glitch.
|
||||
* Delay 5 us.
|
||||
* Deassert bandgap power down and set numerator and denominator
|
||||
* Start 7 us timer.
|
||||
* set internal dividers
|
||||
* Wait for 7 us timer.
|
||||
* Enable plls
|
||||
* Set external dividers while plls are locking
|
||||
* Wait for pll lock
|
||||
* Assert/deassert outreset all.
|
||||
* Take all pll's out of bypass
|
||||
* Clear safe mode
|
||||
* set source main and peripheral clocks
|
||||
* Ungate clocks
|
||||
*/
|
||||
|
||||
void cm_basic_init(const struct cm_config * const cfg)
|
||||
{
|
||||
unsigned long end;
|
||||
|
||||
/* Start by being paranoid and gate all sw managed clocks */
|
||||
|
||||
/*
|
||||
* We need to disable nandclk
|
||||
* and then do another apb access before disabling
|
||||
* gatting off the rest of the periperal clocks.
|
||||
*/
|
||||
writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
|
||||
readl(&clock_manager_base->per_pll.en),
|
||||
&clock_manager_base->per_pll.en);
|
||||
|
||||
/* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
|
||||
writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
|
||||
&clock_manager_base->main_pll.en);
|
||||
|
||||
writel(0, &clock_manager_base->sdr_pll.en);
|
||||
|
||||
/* now we can gate off the rest of the peripheral clocks */
|
||||
writel(0, &clock_manager_base->per_pll.en);
|
||||
|
||||
/* Put all plls in bypass */
|
||||
cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
|
||||
CLKMGR_BYPASS_MAINPLL);
|
||||
|
||||
/* Put all plls VCO registers back to reset value. */
|
||||
writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
|
||||
~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
|
||||
&clock_manager_base->main_pll.vco);
|
||||
writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
|
||||
~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
|
||||
&clock_manager_base->per_pll.vco);
|
||||
writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
|
||||
~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
|
||||
&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/*
|
||||
* The clocks to the flash devices and the L4_MAIN clocks can
|
||||
* glitch when coming out of safe mode if their source values
|
||||
* are different from their reset value. So the trick it to
|
||||
* put them back to their reset state, and change input
|
||||
* after exiting safe mode but before ungating the clocks.
|
||||
*/
|
||||
writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
|
||||
&clock_manager_base->per_pll.src);
|
||||
writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
|
||||
&clock_manager_base->main_pll.l4src);
|
||||
|
||||
/* read back for the required 5 us delay. */
|
||||
readl(&clock_manager_base->main_pll.vco);
|
||||
readl(&clock_manager_base->per_pll.vco);
|
||||
readl(&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
|
||||
/*
|
||||
* We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
|
||||
* with numerator and denominator.
|
||||
*/
|
||||
writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
|
||||
writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
|
||||
writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/*
|
||||
* Time starts here. Must wait 7 us from
|
||||
* BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
|
||||
*/
|
||||
end = timer_get_us() + 7;
|
||||
|
||||
/* main mpu */
|
||||
writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
|
||||
|
||||
/* altera group mpuclk */
|
||||
writel(cfg->altera_grp_mpuclk, &clock_manager_base->altera.mpuclk);
|
||||
|
||||
/* main main clock */
|
||||
writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
|
||||
|
||||
/* main for dbg */
|
||||
writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
|
||||
|
||||
/* main for cfgs2fuser0clk */
|
||||
writel(cfg->cfg2fuser0clk,
|
||||
&clock_manager_base->main_pll.cfgs2fuser0clk);
|
||||
|
||||
/* Peri emac0 50 MHz default to RMII */
|
||||
writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
|
||||
|
||||
/* Peri emac1 50 MHz default to RMII */
|
||||
writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
|
||||
|
||||
/* Peri QSPI */
|
||||
writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
|
||||
|
||||
writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
|
||||
|
||||
/* Peri pernandsdmmcclk */
|
||||
writel(cfg->mainnandsdmmcclk,
|
||||
&clock_manager_base->main_pll.mainnandsdmmcclk);
|
||||
|
||||
writel(cfg->pernandsdmmcclk,
|
||||
&clock_manager_base->per_pll.pernandsdmmcclk);
|
||||
|
||||
/* Peri perbaseclk */
|
||||
writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
|
||||
|
||||
/* Peri s2fuser1clk */
|
||||
writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
|
||||
|
||||
/* 7 us must have elapsed before we can enable the VCO */
|
||||
while (timer_get_us() < end)
|
||||
;
|
||||
|
||||
/* Enable vco */
|
||||
/* main pll vco */
|
||||
writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
|
||||
&clock_manager_base->main_pll.vco);
|
||||
|
||||
/* periferal pll */
|
||||
writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
|
||||
&clock_manager_base->per_pll.vco);
|
||||
|
||||
/* sdram pll vco */
|
||||
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
|
||||
&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/* L3 MP and L3 SP */
|
||||
writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
|
||||
|
||||
writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
|
||||
|
||||
writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
|
||||
|
||||
/* L4 MP, L4 SP, can0, and can1 */
|
||||
writel(cfg->perdiv, &clock_manager_base->per_pll.div);
|
||||
|
||||
writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
|
||||
|
||||
#define LOCKED_MASK \
|
||||
(CLKMGR_INTER_SDRPLLLOCKED_MASK | \
|
||||
CLKMGR_INTER_PERPLLLOCKED_MASK | \
|
||||
CLKMGR_INTER_MAINPLLLOCKED_MASK)
|
||||
|
||||
cm_wait_for_lock(LOCKED_MASK);
|
||||
|
||||
/* write the sdram clock counters before toggling outreset all */
|
||||
writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
|
||||
&clock_manager_base->sdr_pll.ddrdqsclk);
|
||||
|
||||
writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
|
||||
&clock_manager_base->sdr_pll.ddr2xdqsclk);
|
||||
|
||||
writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
|
||||
&clock_manager_base->sdr_pll.ddrdqclk);
|
||||
|
||||
writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
|
||||
&clock_manager_base->sdr_pll.s2fuser2clk);
|
||||
|
||||
/*
|
||||
* after locking, but before taking out of bypass
|
||||
* assert/deassert outresetall
|
||||
*/
|
||||
uint32_t mainvco = readl(&clock_manager_base->main_pll.vco);
|
||||
|
||||
/* assert main outresetall */
|
||||
writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
|
||||
&clock_manager_base->main_pll.vco);
|
||||
|
||||
uint32_t periphvco = readl(&clock_manager_base->per_pll.vco);
|
||||
|
||||
/* assert pheriph outresetall */
|
||||
writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
|
||||
&clock_manager_base->per_pll.vco);
|
||||
|
||||
/* assert sdram outresetall */
|
||||
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
|
||||
CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
|
||||
&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/* deassert main outresetall */
|
||||
writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
|
||||
&clock_manager_base->main_pll.vco);
|
||||
|
||||
/* deassert pheriph outresetall */
|
||||
writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
|
||||
&clock_manager_base->per_pll.vco);
|
||||
|
||||
/* deassert sdram outresetall */
|
||||
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
|
||||
&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/*
|
||||
* now that we've toggled outreset all, all the clocks
|
||||
* are aligned nicely; so we can change any phase.
|
||||
*/
|
||||
cm_write_with_phase(cfg->ddrdqsclk,
|
||||
(uint32_t)&clock_manager_base->sdr_pll.ddrdqsclk,
|
||||
CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
|
||||
|
||||
/* SDRAM DDR2XDQSCLK */
|
||||
cm_write_with_phase(cfg->ddr2xdqsclk,
|
||||
(uint32_t)&clock_manager_base->sdr_pll.ddr2xdqsclk,
|
||||
CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
|
||||
|
||||
cm_write_with_phase(cfg->ddrdqclk,
|
||||
(uint32_t)&clock_manager_base->sdr_pll.ddrdqclk,
|
||||
CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
|
||||
|
||||
cm_write_with_phase(cfg->s2fuser2clk,
|
||||
(uint32_t)&clock_manager_base->sdr_pll.s2fuser2clk,
|
||||
CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
|
||||
|
||||
/* Take all three PLLs out of bypass when safe mode is cleared. */
|
||||
cm_write_bypass(0);
|
||||
|
||||
/* clear safe mode */
|
||||
cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
|
||||
|
||||
/*
|
||||
* now that safe mode is clear with clocks gated
|
||||
* it safe to change the source mux for the flashes the the L4_MAIN
|
||||
*/
|
||||
writel(cfg->persrc, &clock_manager_base->per_pll.src);
|
||||
writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
|
||||
|
||||
/* Now ungate non-hw-managed clocks */
|
||||
writel(~0, &clock_manager_base->main_pll.en);
|
||||
writel(~0, &clock_manager_base->per_pll.en);
|
||||
writel(~0, &clock_manager_base->sdr_pll.en);
|
||||
|
||||
/* Clear the loss of lock bits (write 1 to clear) */
|
||||
writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
|
||||
CLKMGR_INTER_MAINPLLLOST_MASK,
|
||||
&clock_manager_base->inter);
|
||||
}
|
||||
|
||||
static unsigned int cm_get_main_vco_clk_hz(void)
|
||||
{
|
||||
uint32_t reg, clock;
|
||||
|
||||
/* get the main VCO clock */
|
||||
reg = readl(&clock_manager_base->main_pll.vco);
|
||||
clock = cm_get_osc_clk_hz(1);
|
||||
clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
|
||||
CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
|
||||
clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
|
||||
CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
static unsigned int cm_get_per_vco_clk_hz(void)
|
||||
{
|
||||
uint32_t reg, clock = 0;
|
||||
|
||||
/* identify PER PLL clock source */
|
||||
reg = readl(&clock_manager_base->per_pll.vco);
|
||||
reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
|
||||
CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
|
||||
if (reg == CLKMGR_VCO_SSRC_EOSC1)
|
||||
clock = cm_get_osc_clk_hz(1);
|
||||
else if (reg == CLKMGR_VCO_SSRC_EOSC2)
|
||||
clock = cm_get_osc_clk_hz(2);
|
||||
else if (reg == CLKMGR_VCO_SSRC_F2S)
|
||||
clock = cm_get_f2s_per_ref_clk_hz();
|
||||
|
||||
/* get the PER VCO clock */
|
||||
reg = readl(&clock_manager_base->per_pll.vco);
|
||||
clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
|
||||
CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
|
||||
clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
|
||||
CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned long cm_get_mpu_clk_hz(void)
|
||||
{
|
||||
uint32_t reg, clock;
|
||||
|
||||
clock = cm_get_main_vco_clk_hz();
|
||||
|
||||
/* get the MPU clock */
|
||||
reg = readl(&clock_manager_base->altera.mpuclk);
|
||||
clock /= (reg + 1);
|
||||
reg = readl(&clock_manager_base->main_pll.mpuclk);
|
||||
clock /= (reg + 1);
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned long cm_get_sdram_clk_hz(void)
|
||||
{
|
||||
uint32_t reg, clock = 0;
|
||||
|
||||
/* identify SDRAM PLL clock source */
|
||||
reg = readl(&clock_manager_base->sdr_pll.vco);
|
||||
reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
|
||||
CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
|
||||
if (reg == CLKMGR_VCO_SSRC_EOSC1)
|
||||
clock = cm_get_osc_clk_hz(1);
|
||||
else if (reg == CLKMGR_VCO_SSRC_EOSC2)
|
||||
clock = cm_get_osc_clk_hz(2);
|
||||
else if (reg == CLKMGR_VCO_SSRC_F2S)
|
||||
clock = cm_get_f2s_sdr_ref_clk_hz();
|
||||
|
||||
/* get the SDRAM VCO clock */
|
||||
reg = readl(&clock_manager_base->sdr_pll.vco);
|
||||
clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
|
||||
CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
|
||||
clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
|
||||
CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
|
||||
|
||||
/* get the SDRAM (DDR_DQS) clock */
|
||||
reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
|
||||
reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
|
||||
CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
|
||||
clock /= (reg + 1);
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned int cm_get_l4_sp_clk_hz(void)
|
||||
{
|
||||
uint32_t reg, clock = 0;
|
||||
|
||||
/* identify the source of L4 SP clock */
|
||||
reg = readl(&clock_manager_base->main_pll.l4src);
|
||||
reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
|
||||
CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
|
||||
|
||||
if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
|
||||
clock = cm_get_main_vco_clk_hz();
|
||||
|
||||
/* get the clock prior L4 SP divider (main clk) */
|
||||
reg = readl(&clock_manager_base->altera.mainclk);
|
||||
clock /= (reg + 1);
|
||||
reg = readl(&clock_manager_base->main_pll.mainclk);
|
||||
clock /= (reg + 1);
|
||||
} else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
|
||||
clock = cm_get_per_vco_clk_hz();
|
||||
|
||||
/* get the clock prior L4 SP divider (periph_base_clk) */
|
||||
reg = readl(&clock_manager_base->per_pll.perbaseclk);
|
||||
clock /= (reg + 1);
|
||||
}
|
||||
|
||||
/* get the L4 SP clock which supplied to UART */
|
||||
reg = readl(&clock_manager_base->main_pll.maindiv);
|
||||
reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
|
||||
CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
|
||||
clock = clock / (1 << reg);
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned int cm_get_mmc_controller_clk_hz(void)
|
||||
{
|
||||
uint32_t reg, clock = 0;
|
||||
|
||||
/* identify the source of MMC clock */
|
||||
reg = readl(&clock_manager_base->per_pll.src);
|
||||
reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
|
||||
CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
|
||||
|
||||
if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
|
||||
clock = cm_get_f2s_per_ref_clk_hz();
|
||||
} else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
|
||||
clock = cm_get_main_vco_clk_hz();
|
||||
|
||||
/* get the SDMMC clock */
|
||||
reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
|
||||
clock /= (reg + 1);
|
||||
} else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
|
||||
clock = cm_get_per_vco_clk_hz();
|
||||
|
||||
/* get the SDMMC clock */
|
||||
reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
|
||||
clock /= (reg + 1);
|
||||
}
|
||||
|
||||
/* further divide by 4 as we have fixed divider at wrapper */
|
||||
clock /= 4;
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned int cm_get_qspi_controller_clk_hz(void)
|
||||
{
|
||||
uint32_t reg, clock = 0;
|
||||
|
||||
/* identify the source of QSPI clock */
|
||||
reg = readl(&clock_manager_base->per_pll.src);
|
||||
reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
|
||||
CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
|
||||
|
||||
if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
|
||||
clock = cm_get_f2s_per_ref_clk_hz();
|
||||
} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
|
||||
clock = cm_get_main_vco_clk_hz();
|
||||
|
||||
/* get the qspi clock */
|
||||
reg = readl(&clock_manager_base->main_pll.mainqspiclk);
|
||||
clock /= (reg + 1);
|
||||
} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
|
||||
clock = cm_get_per_vco_clk_hz();
|
||||
|
||||
/* get the qspi clock */
|
||||
reg = readl(&clock_manager_base->per_pll.perqspiclk);
|
||||
clock /= (reg + 1);
|
||||
}
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned int cm_get_spi_controller_clk_hz(void)
|
||||
{
|
||||
uint32_t reg, clock = 0;
|
||||
|
||||
clock = cm_get_per_vco_clk_hz();
|
||||
|
||||
/* get the clock prior L4 SP divider (periph_base_clk) */
|
||||
reg = readl(&clock_manager_base->per_pll.perbaseclk);
|
||||
clock /= (reg + 1);
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
static void cm_print_clock_quick_summary(void)
|
||||
{
|
||||
printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
|
||||
printf("DDR %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
|
||||
printf("EOSC1 %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
|
||||
printf("EOSC2 %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
|
||||
printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
|
||||
printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
|
||||
printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
|
||||
printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
|
||||
printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
|
||||
printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
|
||||
return wait_for_bit(__func__, (const u32 *)&clock_manager_base->stat,
|
||||
CLKMGR_STAT_BUSY, false, 20000, false);
|
||||
}
|
||||
|
||||
int set_cpu_clk_info(void)
|
||||
|
||||
524
arch/arm/mach-socfpga/clock_manager_gen5.c
Normal file
524
arch/arm/mach-socfpga/clock_manager_gen5.c
Normal file
@ -0,0 +1,524 @@
|
||||
/*
|
||||
* Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/clock_manager.h>
|
||||
#include <wait_bit.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
static const struct socfpga_clock_manager *clock_manager_base =
|
||||
(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
|
||||
|
||||
/*
|
||||
* function to write the bypass register which requires a poll of the
|
||||
* busy bit
|
||||
*/
|
||||
static void cm_write_bypass(u32 val)
|
||||
{
|
||||
writel(val, &clock_manager_base->bypass);
|
||||
cm_wait_for_fsm();
|
||||
}
|
||||
|
||||
/* function to write the ctrl register which requires a poll of the busy bit */
|
||||
static void cm_write_ctrl(u32 val)
|
||||
{
|
||||
writel(val, &clock_manager_base->ctrl);
|
||||
cm_wait_for_fsm();
|
||||
}
|
||||
|
||||
/* function to write a clock register that has phase information */
|
||||
static int cm_write_with_phase(u32 value, u32 reg_address, u32 mask)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* poll until phase is zero */
|
||||
ret = wait_for_bit(__func__, (const u32 *)reg_address, mask,
|
||||
false, 20000, false);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
writel(value, reg_address);
|
||||
|
||||
return wait_for_bit(__func__, (const u32 *)reg_address, mask,
|
||||
false, 20000, false);
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup clocks while making no assumptions about previous state of the clocks.
|
||||
*
|
||||
* Start by being paranoid and gate all sw managed clocks
|
||||
* Put all plls in bypass
|
||||
* Put all plls VCO registers back to reset value (bandgap power down).
|
||||
* Put peripheral and main pll src to reset value to avoid glitch.
|
||||
* Delay 5 us.
|
||||
* Deassert bandgap power down and set numerator and denominator
|
||||
* Start 7 us timer.
|
||||
* set internal dividers
|
||||
* Wait for 7 us timer.
|
||||
* Enable plls
|
||||
* Set external dividers while plls are locking
|
||||
* Wait for pll lock
|
||||
* Assert/deassert outreset all.
|
||||
* Take all pll's out of bypass
|
||||
* Clear safe mode
|
||||
* set source main and peripheral clocks
|
||||
* Ungate clocks
|
||||
*/
|
||||
|
||||
int cm_basic_init(const struct cm_config * const cfg)
|
||||
{
|
||||
unsigned long end;
|
||||
int ret;
|
||||
|
||||
/* Start by being paranoid and gate all sw managed clocks */
|
||||
|
||||
/*
|
||||
* We need to disable nandclk
|
||||
* and then do another apb access before disabling
|
||||
* gatting off the rest of the periperal clocks.
|
||||
*/
|
||||
writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
|
||||
readl(&clock_manager_base->per_pll.en),
|
||||
&clock_manager_base->per_pll.en);
|
||||
|
||||
/* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
|
||||
writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
|
||||
CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
|
||||
&clock_manager_base->main_pll.en);
|
||||
|
||||
writel(0, &clock_manager_base->sdr_pll.en);
|
||||
|
||||
/* now we can gate off the rest of the peripheral clocks */
|
||||
writel(0, &clock_manager_base->per_pll.en);
|
||||
|
||||
/* Put all plls in bypass */
|
||||
cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
|
||||
CLKMGR_BYPASS_MAINPLL);
|
||||
|
||||
/* Put all plls VCO registers back to reset value. */
|
||||
writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
|
||||
~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
|
||||
&clock_manager_base->main_pll.vco);
|
||||
writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
|
||||
~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
|
||||
&clock_manager_base->per_pll.vco);
|
||||
writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
|
||||
~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
|
||||
&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/*
|
||||
* The clocks to the flash devices and the L4_MAIN clocks can
|
||||
* glitch when coming out of safe mode if their source values
|
||||
* are different from their reset value. So the trick it to
|
||||
* put them back to their reset state, and change input
|
||||
* after exiting safe mode but before ungating the clocks.
|
||||
*/
|
||||
writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
|
||||
&clock_manager_base->per_pll.src);
|
||||
writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
|
||||
&clock_manager_base->main_pll.l4src);
|
||||
|
||||
/* read back for the required 5 us delay. */
|
||||
readl(&clock_manager_base->main_pll.vco);
|
||||
readl(&clock_manager_base->per_pll.vco);
|
||||
readl(&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
|
||||
/*
|
||||
* We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
|
||||
* with numerator and denominator.
|
||||
*/
|
||||
writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
|
||||
writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
|
||||
writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/*
|
||||
* Time starts here. Must wait 7 us from
|
||||
* BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
|
||||
*/
|
||||
end = timer_get_us() + 7;
|
||||
|
||||
/* main mpu */
|
||||
writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
|
||||
|
||||
/* altera group mpuclk */
|
||||
writel(cfg->altera_grp_mpuclk, &clock_manager_base->altera.mpuclk);
|
||||
|
||||
/* main main clock */
|
||||
writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
|
||||
|
||||
/* main for dbg */
|
||||
writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
|
||||
|
||||
/* main for cfgs2fuser0clk */
|
||||
writel(cfg->cfg2fuser0clk,
|
||||
&clock_manager_base->main_pll.cfgs2fuser0clk);
|
||||
|
||||
/* Peri emac0 50 MHz default to RMII */
|
||||
writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
|
||||
|
||||
/* Peri emac1 50 MHz default to RMII */
|
||||
writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
|
||||
|
||||
/* Peri QSPI */
|
||||
writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
|
||||
|
||||
writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
|
||||
|
||||
/* Peri pernandsdmmcclk */
|
||||
writel(cfg->mainnandsdmmcclk,
|
||||
&clock_manager_base->main_pll.mainnandsdmmcclk);
|
||||
|
||||
writel(cfg->pernandsdmmcclk,
|
||||
&clock_manager_base->per_pll.pernandsdmmcclk);
|
||||
|
||||
/* Peri perbaseclk */
|
||||
writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
|
||||
|
||||
/* Peri s2fuser1clk */
|
||||
writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
|
||||
|
||||
/* 7 us must have elapsed before we can enable the VCO */
|
||||
while (timer_get_us() < end)
|
||||
;
|
||||
|
||||
/* Enable vco */
|
||||
/* main pll vco */
|
||||
writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
|
||||
&clock_manager_base->main_pll.vco);
|
||||
|
||||
/* periferal pll */
|
||||
writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
|
||||
&clock_manager_base->per_pll.vco);
|
||||
|
||||
/* sdram pll vco */
|
||||
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
|
||||
&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/* L3 MP and L3 SP */
|
||||
writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
|
||||
|
||||
writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
|
||||
|
||||
writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
|
||||
|
||||
/* L4 MP, L4 SP, can0, and can1 */
|
||||
writel(cfg->perdiv, &clock_manager_base->per_pll.div);
|
||||
|
||||
writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
|
||||
|
||||
cm_wait_for_lock(LOCKED_MASK);
|
||||
|
||||
/* write the sdram clock counters before toggling outreset all */
|
||||
writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
|
||||
&clock_manager_base->sdr_pll.ddrdqsclk);
|
||||
|
||||
writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
|
||||
&clock_manager_base->sdr_pll.ddr2xdqsclk);
|
||||
|
||||
writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
|
||||
&clock_manager_base->sdr_pll.ddrdqclk);
|
||||
|
||||
writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
|
||||
&clock_manager_base->sdr_pll.s2fuser2clk);
|
||||
|
||||
/*
|
||||
* after locking, but before taking out of bypass
|
||||
* assert/deassert outresetall
|
||||
*/
|
||||
u32 mainvco = readl(&clock_manager_base->main_pll.vco);
|
||||
|
||||
/* assert main outresetall */
|
||||
writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
|
||||
&clock_manager_base->main_pll.vco);
|
||||
|
||||
u32 periphvco = readl(&clock_manager_base->per_pll.vco);
|
||||
|
||||
/* assert pheriph outresetall */
|
||||
writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
|
||||
&clock_manager_base->per_pll.vco);
|
||||
|
||||
/* assert sdram outresetall */
|
||||
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
|
||||
CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
|
||||
&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/* deassert main outresetall */
|
||||
writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
|
||||
&clock_manager_base->main_pll.vco);
|
||||
|
||||
/* deassert pheriph outresetall */
|
||||
writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
|
||||
&clock_manager_base->per_pll.vco);
|
||||
|
||||
/* deassert sdram outresetall */
|
||||
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
|
||||
&clock_manager_base->sdr_pll.vco);
|
||||
|
||||
/*
|
||||
* now that we've toggled outreset all, all the clocks
|
||||
* are aligned nicely; so we can change any phase.
|
||||
*/
|
||||
ret = cm_write_with_phase(cfg->ddrdqsclk,
|
||||
(u32)&clock_manager_base->sdr_pll.ddrdqsclk,
|
||||
CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* SDRAM DDR2XDQSCLK */
|
||||
ret = cm_write_with_phase(cfg->ddr2xdqsclk,
|
||||
(u32)&clock_manager_base->sdr_pll.ddr2xdqsclk,
|
||||
CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = cm_write_with_phase(cfg->ddrdqclk,
|
||||
(u32)&clock_manager_base->sdr_pll.ddrdqclk,
|
||||
CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = cm_write_with_phase(cfg->s2fuser2clk,
|
||||
(u32)&clock_manager_base->sdr_pll.s2fuser2clk,
|
||||
CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Take all three PLLs out of bypass when safe mode is cleared. */
|
||||
cm_write_bypass(0);
|
||||
|
||||
/* clear safe mode */
|
||||
cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
|
||||
|
||||
/*
|
||||
* now that safe mode is clear with clocks gated
|
||||
* it safe to change the source mux for the flashes the the L4_MAIN
|
||||
*/
|
||||
writel(cfg->persrc, &clock_manager_base->per_pll.src);
|
||||
writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
|
||||
|
||||
/* Now ungate non-hw-managed clocks */
|
||||
writel(~0, &clock_manager_base->main_pll.en);
|
||||
writel(~0, &clock_manager_base->per_pll.en);
|
||||
writel(~0, &clock_manager_base->sdr_pll.en);
|
||||
|
||||
/* Clear the loss of lock bits (write 1 to clear) */
|
||||
writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
|
||||
CLKMGR_INTER_MAINPLLLOST_MASK,
|
||||
&clock_manager_base->inter);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned int cm_get_main_vco_clk_hz(void)
|
||||
{
|
||||
u32 reg, clock;
|
||||
|
||||
/* get the main VCO clock */
|
||||
reg = readl(&clock_manager_base->main_pll.vco);
|
||||
clock = cm_get_osc_clk_hz(1);
|
||||
clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
|
||||
CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
|
||||
clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
|
||||
CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
static unsigned int cm_get_per_vco_clk_hz(void)
|
||||
{
|
||||
u32 reg, clock = 0;
|
||||
|
||||
/* identify PER PLL clock source */
|
||||
reg = readl(&clock_manager_base->per_pll.vco);
|
||||
reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
|
||||
CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
|
||||
if (reg == CLKMGR_VCO_SSRC_EOSC1)
|
||||
clock = cm_get_osc_clk_hz(1);
|
||||
else if (reg == CLKMGR_VCO_SSRC_EOSC2)
|
||||
clock = cm_get_osc_clk_hz(2);
|
||||
else if (reg == CLKMGR_VCO_SSRC_F2S)
|
||||
clock = cm_get_f2s_per_ref_clk_hz();
|
||||
|
||||
/* get the PER VCO clock */
|
||||
reg = readl(&clock_manager_base->per_pll.vco);
|
||||
clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
|
||||
CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
|
||||
clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
|
||||
CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned long cm_get_mpu_clk_hz(void)
|
||||
{
|
||||
u32 reg, clock;
|
||||
|
||||
clock = cm_get_main_vco_clk_hz();
|
||||
|
||||
/* get the MPU clock */
|
||||
reg = readl(&clock_manager_base->altera.mpuclk);
|
||||
clock /= (reg + 1);
|
||||
reg = readl(&clock_manager_base->main_pll.mpuclk);
|
||||
clock /= (reg + 1);
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned long cm_get_sdram_clk_hz(void)
|
||||
{
|
||||
u32 reg, clock = 0;
|
||||
|
||||
/* identify SDRAM PLL clock source */
|
||||
reg = readl(&clock_manager_base->sdr_pll.vco);
|
||||
reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
|
||||
CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
|
||||
if (reg == CLKMGR_VCO_SSRC_EOSC1)
|
||||
clock = cm_get_osc_clk_hz(1);
|
||||
else if (reg == CLKMGR_VCO_SSRC_EOSC2)
|
||||
clock = cm_get_osc_clk_hz(2);
|
||||
else if (reg == CLKMGR_VCO_SSRC_F2S)
|
||||
clock = cm_get_f2s_sdr_ref_clk_hz();
|
||||
|
||||
/* get the SDRAM VCO clock */
|
||||
reg = readl(&clock_manager_base->sdr_pll.vco);
|
||||
clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
|
||||
CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
|
||||
clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
|
||||
CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
|
||||
|
||||
/* get the SDRAM (DDR_DQS) clock */
|
||||
reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
|
||||
reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
|
||||
CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
|
||||
clock /= (reg + 1);
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned int cm_get_l4_sp_clk_hz(void)
|
||||
{
|
||||
u32 reg, clock = 0;
|
||||
|
||||
/* identify the source of L4 SP clock */
|
||||
reg = readl(&clock_manager_base->main_pll.l4src);
|
||||
reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
|
||||
CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
|
||||
|
||||
if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
|
||||
clock = cm_get_main_vco_clk_hz();
|
||||
|
||||
/* get the clock prior L4 SP divider (main clk) */
|
||||
reg = readl(&clock_manager_base->altera.mainclk);
|
||||
clock /= (reg + 1);
|
||||
reg = readl(&clock_manager_base->main_pll.mainclk);
|
||||
clock /= (reg + 1);
|
||||
} else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
|
||||
clock = cm_get_per_vco_clk_hz();
|
||||
|
||||
/* get the clock prior L4 SP divider (periph_base_clk) */
|
||||
reg = readl(&clock_manager_base->per_pll.perbaseclk);
|
||||
clock /= (reg + 1);
|
||||
}
|
||||
|
||||
/* get the L4 SP clock which supplied to UART */
|
||||
reg = readl(&clock_manager_base->main_pll.maindiv);
|
||||
reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
|
||||
CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
|
||||
clock = clock / (1 << reg);
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned int cm_get_mmc_controller_clk_hz(void)
|
||||
{
|
||||
u32 reg, clock = 0;
|
||||
|
||||
/* identify the source of MMC clock */
|
||||
reg = readl(&clock_manager_base->per_pll.src);
|
||||
reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
|
||||
CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
|
||||
|
||||
if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
|
||||
clock = cm_get_f2s_per_ref_clk_hz();
|
||||
} else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
|
||||
clock = cm_get_main_vco_clk_hz();
|
||||
|
||||
/* get the SDMMC clock */
|
||||
reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
|
||||
clock /= (reg + 1);
|
||||
} else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
|
||||
clock = cm_get_per_vco_clk_hz();
|
||||
|
||||
/* get the SDMMC clock */
|
||||
reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
|
||||
clock /= (reg + 1);
|
||||
}
|
||||
|
||||
/* further divide by 4 as we have fixed divider at wrapper */
|
||||
clock /= 4;
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned int cm_get_qspi_controller_clk_hz(void)
|
||||
{
|
||||
u32 reg, clock = 0;
|
||||
|
||||
/* identify the source of QSPI clock */
|
||||
reg = readl(&clock_manager_base->per_pll.src);
|
||||
reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
|
||||
CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
|
||||
|
||||
if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
|
||||
clock = cm_get_f2s_per_ref_clk_hz();
|
||||
} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
|
||||
clock = cm_get_main_vco_clk_hz();
|
||||
|
||||
/* get the qspi clock */
|
||||
reg = readl(&clock_manager_base->main_pll.mainqspiclk);
|
||||
clock /= (reg + 1);
|
||||
} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
|
||||
clock = cm_get_per_vco_clk_hz();
|
||||
|
||||
/* get the qspi clock */
|
||||
reg = readl(&clock_manager_base->per_pll.perqspiclk);
|
||||
clock /= (reg + 1);
|
||||
}
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
unsigned int cm_get_spi_controller_clk_hz(void)
|
||||
{
|
||||
u32 reg, clock = 0;
|
||||
|
||||
clock = cm_get_per_vco_clk_hz();
|
||||
|
||||
/* get the clock prior L4 SP divider (periph_base_clk) */
|
||||
reg = readl(&clock_manager_base->per_pll.perbaseclk);
|
||||
clock /= (reg + 1);
|
||||
|
||||
return clock;
|
||||
}
|
||||
|
||||
void cm_print_clock_quick_summary(void)
|
||||
{
|
||||
printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
|
||||
printf("DDR %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
|
||||
printf("EOSC1 %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
|
||||
printf("EOSC2 %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
|
||||
printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
|
||||
printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
|
||||
printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
|
||||
printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
|
||||
printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
|
||||
printf("SPI %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
|
||||
}
|
||||
@ -1,317 +1,19 @@
|
||||
/*
|
||||
* Copyright (C) 2013 Altera Corporation <www.altera.com>
|
||||
* Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef _CLOCK_MANAGER_H_
|
||||
#define _CLOCK_MANAGER_H_
|
||||
#ifndef _CLOCK_MANAGER_H_
|
||||
#define _CLOCK_MANAGER_H_
|
||||
|
||||
#ifndef __ASSEMBLER__
|
||||
/* Clock speed accessors */
|
||||
unsigned long cm_get_mpu_clk_hz(void);
|
||||
unsigned long cm_get_sdram_clk_hz(void);
|
||||
unsigned int cm_get_l4_sp_clk_hz(void);
|
||||
unsigned int cm_get_mmc_controller_clk_hz(void);
|
||||
unsigned int cm_get_qspi_controller_clk_hz(void);
|
||||
unsigned int cm_get_spi_controller_clk_hz(void);
|
||||
const unsigned int cm_get_osc_clk_hz(const int osc);
|
||||
const unsigned int cm_get_f2s_per_ref_clk_hz(void);
|
||||
const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
|
||||
|
||||
/* Clock configuration accessors */
|
||||
const struct cm_config * const cm_get_default_config(void);
|
||||
void cm_wait_for_lock(u32 mask);
|
||||
int cm_wait_for_fsm(void);
|
||||
void cm_print_clock_quick_summary(void);
|
||||
#endif
|
||||
|
||||
struct cm_config {
|
||||
/* main group */
|
||||
uint32_t main_vco_base;
|
||||
uint32_t mpuclk;
|
||||
uint32_t mainclk;
|
||||
uint32_t dbgatclk;
|
||||
uint32_t mainqspiclk;
|
||||
uint32_t mainnandsdmmcclk;
|
||||
uint32_t cfg2fuser0clk;
|
||||
uint32_t maindiv;
|
||||
uint32_t dbgdiv;
|
||||
uint32_t tracediv;
|
||||
uint32_t l4src;
|
||||
|
||||
/* peripheral group */
|
||||
uint32_t peri_vco_base;
|
||||
uint32_t emac0clk;
|
||||
uint32_t emac1clk;
|
||||
uint32_t perqspiclk;
|
||||
uint32_t pernandsdmmcclk;
|
||||
uint32_t perbaseclk;
|
||||
uint32_t s2fuser1clk;
|
||||
uint32_t perdiv;
|
||||
uint32_t gpiodiv;
|
||||
uint32_t persrc;
|
||||
|
||||
/* sdram pll group */
|
||||
uint32_t sdram_vco_base;
|
||||
uint32_t ddrdqsclk;
|
||||
uint32_t ddr2xdqsclk;
|
||||
uint32_t ddrdqclk;
|
||||
uint32_t s2fuser2clk;
|
||||
|
||||
/* altera group */
|
||||
uint32_t altera_grp_mpuclk;
|
||||
};
|
||||
|
||||
void cm_basic_init(const struct cm_config * const cfg);
|
||||
|
||||
struct socfpga_clock_manager_main_pll {
|
||||
u32 vco;
|
||||
u32 misc;
|
||||
u32 mpuclk;
|
||||
u32 mainclk;
|
||||
u32 dbgatclk;
|
||||
u32 mainqspiclk;
|
||||
u32 mainnandsdmmcclk;
|
||||
u32 cfgs2fuser0clk;
|
||||
u32 en;
|
||||
u32 maindiv;
|
||||
u32 dbgdiv;
|
||||
u32 tracediv;
|
||||
u32 l4src;
|
||||
u32 stat;
|
||||
u32 _pad_0x38_0x40[2];
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager_per_pll {
|
||||
u32 vco;
|
||||
u32 misc;
|
||||
u32 emac0clk;
|
||||
u32 emac1clk;
|
||||
u32 perqspiclk;
|
||||
u32 pernandsdmmcclk;
|
||||
u32 perbaseclk;
|
||||
u32 s2fuser1clk;
|
||||
u32 en;
|
||||
u32 div;
|
||||
u32 gpiodiv;
|
||||
u32 src;
|
||||
u32 stat;
|
||||
u32 _pad_0x34_0x40[3];
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager_sdr_pll {
|
||||
u32 vco;
|
||||
u32 ctrl;
|
||||
u32 ddrdqsclk;
|
||||
u32 ddr2xdqsclk;
|
||||
u32 ddrdqclk;
|
||||
u32 s2fuser2clk;
|
||||
u32 en;
|
||||
u32 stat;
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager_altera {
|
||||
u32 mpuclk;
|
||||
u32 mainclk;
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager {
|
||||
u32 ctrl;
|
||||
u32 bypass;
|
||||
u32 inter;
|
||||
u32 intren;
|
||||
u32 dbctrl;
|
||||
u32 stat;
|
||||
u32 _pad_0x18_0x3f[10];
|
||||
struct socfpga_clock_manager_main_pll main_pll;
|
||||
struct socfpga_clock_manager_per_pll per_pll;
|
||||
struct socfpga_clock_manager_sdr_pll sdr_pll;
|
||||
struct socfpga_clock_manager_altera altera;
|
||||
u32 _pad_0xe8_0x200[70];
|
||||
};
|
||||
|
||||
#define CLKMGR_CTRL_SAFEMODE (1 << 0)
|
||||
#define CLKMGR_CTRL_SAFEMODE_OFFSET 0
|
||||
|
||||
#define CLKMGR_BYPASS_PERPLLSRC (1 << 4)
|
||||
#define CLKMGR_BYPASS_PERPLLSRC_OFFSET 4
|
||||
#define CLKMGR_BYPASS_PERPLL (1 << 3)
|
||||
#define CLKMGR_BYPASS_PERPLL_OFFSET 3
|
||||
#define CLKMGR_BYPASS_SDRPLLSRC (1 << 2)
|
||||
#define CLKMGR_BYPASS_SDRPLLSRC_OFFSET 2
|
||||
#define CLKMGR_BYPASS_SDRPLL (1 << 1)
|
||||
#define CLKMGR_BYPASS_SDRPLL_OFFSET 1
|
||||
#define CLKMGR_BYPASS_MAINPLL (1 << 0)
|
||||
#define CLKMGR_BYPASS_MAINPLL_OFFSET 0
|
||||
|
||||
#define CLKMGR_INTER_SDRPLLLOCKED_MASK 0x00000100
|
||||
#define CLKMGR_INTER_PERPLLLOCKED_MASK 0x00000080
|
||||
#define CLKMGR_INTER_MAINPLLLOCKED_MASK 0x00000040
|
||||
#define CLKMGR_INTER_PERPLLLOST_MASK 0x00000010
|
||||
#define CLKMGR_INTER_SDRPLLLOST_MASK 0x00000020
|
||||
#define CLKMGR_INTER_MAINPLLLOST_MASK 0x00000008
|
||||
|
||||
#define CLKMGR_STAT_BUSY (1 << 0)
|
||||
|
||||
/* Main PLL */
|
||||
#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN (1 << 0)
|
||||
#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET 16
|
||||
#define CLKMGR_MAINPLLGRP_VCO_DENOM_MASK 0x003f0000
|
||||
#define CLKMGR_MAINPLLGRP_VCO_EN (1 << 1)
|
||||
#define CLKMGR_MAINPLLGRP_VCO_EN_OFFSET 1
|
||||
#define CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET 3
|
||||
#define CLKMGR_MAINPLLGRP_VCO_NUMER_MASK 0x0000fff8
|
||||
#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
|
||||
#define CLKMGR_MAINPLLGRP_VCO_PWRDN (1 << 2)
|
||||
#define CLKMGR_MAINPLLGRP_VCO_PWRDN_OFFSET 2
|
||||
#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
|
||||
#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK 0x00000010
|
||||
#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK 0x00000020
|
||||
#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK 0x00000080
|
||||
#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK 0x00000040
|
||||
#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK 0x00000004
|
||||
#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK 0x00000200
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_MASK 0x00000003
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET 2
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_MASK 0x0000000c
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET 4
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_MASK 0x00000070
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET 7
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK 0x00000380
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_MASK 0x00000003
|
||||
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET 2
|
||||
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_MASK 0x0000000c
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_MASK 0x00000007
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_L4MP (1 << 0)
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_L4SP (1 << 1)
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET 1
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
|
||||
#define CLKMGR_L4_SP_CLK_SRC_MAINPLL 0x0
|
||||
#define CLKMGR_L4_SP_CLK_SRC_PERPLL 0x1
|
||||
|
||||
/* Per PLL */
|
||||
#define CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET 16
|
||||
#define CLKMGR_PERPLLGRP_VCO_DENOM_MASK 0x003f0000
|
||||
#define CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET 3
|
||||
#define CLKMGR_PERPLLGRP_VCO_NUMER_MASK 0x0000fff8
|
||||
#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
|
||||
#define CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET 22
|
||||
#define CLKMGR_PERPLLGRP_VCO_PSRC_MASK 0x00c00000
|
||||
#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
|
||||
#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
|
||||
#define CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET 22
|
||||
#define CLKMGR_PERPLLGRP_VCO_SSRC_MASK 0x00c00000
|
||||
|
||||
#define CLKMGR_VCO_SSRC_EOSC1 0x0
|
||||
#define CLKMGR_VCO_SSRC_EOSC2 0x1
|
||||
#define CLKMGR_VCO_SSRC_F2S 0x2
|
||||
|
||||
#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
|
||||
#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK 0x00000100
|
||||
|
||||
#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET 6
|
||||
#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_MASK 0x000001c0
|
||||
#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET 9
|
||||
#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_MASK 0x00000e00
|
||||
#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
|
||||
#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
|
||||
#define CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_DIV_USBCLK_MASK 0x00000007
|
||||
|
||||
#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_MASK 0x00ffffff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_SRC_NAND_OFFSET 2
|
||||
#define CLKMGR_PERPLLGRP_SRC_NAND_MASK 0x0000000c
|
||||
#define CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET 4
|
||||
#define CLKMGR_PERPLLGRP_SRC_QSPI_MASK 0x00000030
|
||||
#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
|
||||
#define CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_SRC_SDMMC_MASK 0x00000003
|
||||
#define CLKMGR_SDMMC_CLK_SRC_F2S 0x0
|
||||
#define CLKMGR_SDMMC_CLK_SRC_MAIN 0x1
|
||||
#define CLKMGR_SDMMC_CLK_SRC_PER 0x2
|
||||
#define CLKMGR_QSPI_CLK_SRC_F2S 0x0
|
||||
#define CLKMGR_QSPI_CLK_SRC_MAIN 0x1
|
||||
#define CLKMGR_QSPI_CLK_SRC_PER 0x2
|
||||
|
||||
/* SDR PLL */
|
||||
#define CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET 16
|
||||
#define CLKMGR_SDRPLLGRP_VCO_DENOM_MASK 0x003f0000
|
||||
#define CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET 3
|
||||
#define CLKMGR_SDRPLLGRP_VCO_NUMER_MASK 0x0000fff8
|
||||
#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL (1 << 24)
|
||||
#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_OFFSET 24
|
||||
#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_OFFSET 25
|
||||
#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
|
||||
#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
|
||||
#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
|
||||
#define CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET 22
|
||||
#define CLKMGR_SDRPLLGRP_VCO_SSRC_MASK 0x00c00000
|
||||
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET 9
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x00000e00
|
||||
|
||||
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
|
||||
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET 9
|
||||
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x00000e00
|
||||
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET 9
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x00000e00
|
||||
|
||||
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
|
||||
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET 9
|
||||
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x00000e00
|
||||
|
||||
#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
|
||||
#include <asm/arch/clock_manager_gen5.h>
|
||||
#endif
|
||||
#endif /* _CLOCK_MANAGER_H_ */
|
||||
|
||||
322
arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
Normal file
322
arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
Normal file
@ -0,0 +1,322 @@
|
||||
/*
|
||||
* Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef _CLOCK_MANAGER_GEN5_H_
|
||||
#define _CLOCK_MANAGER_GEN5_H_
|
||||
|
||||
#ifndef __ASSEMBLER__
|
||||
|
||||
struct cm_config {
|
||||
/* main group */
|
||||
u32 main_vco_base;
|
||||
u32 mpuclk;
|
||||
u32 mainclk;
|
||||
u32 dbgatclk;
|
||||
u32 mainqspiclk;
|
||||
u32 mainnandsdmmcclk;
|
||||
u32 cfg2fuser0clk;
|
||||
u32 maindiv;
|
||||
u32 dbgdiv;
|
||||
u32 tracediv;
|
||||
u32 l4src;
|
||||
|
||||
/* peripheral group */
|
||||
u32 peri_vco_base;
|
||||
u32 emac0clk;
|
||||
u32 emac1clk;
|
||||
u32 perqspiclk;
|
||||
u32 pernandsdmmcclk;
|
||||
u32 perbaseclk;
|
||||
u32 s2fuser1clk;
|
||||
u32 perdiv;
|
||||
u32 gpiodiv;
|
||||
u32 persrc;
|
||||
|
||||
/* sdram pll group */
|
||||
u32 sdram_vco_base;
|
||||
u32 ddrdqsclk;
|
||||
u32 ddr2xdqsclk;
|
||||
u32 ddrdqclk;
|
||||
u32 s2fuser2clk;
|
||||
|
||||
/* altera group */
|
||||
u32 altera_grp_mpuclk;
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager_main_pll {
|
||||
u32 vco;
|
||||
u32 misc;
|
||||
u32 mpuclk;
|
||||
u32 mainclk;
|
||||
u32 dbgatclk;
|
||||
u32 mainqspiclk;
|
||||
u32 mainnandsdmmcclk;
|
||||
u32 cfgs2fuser0clk;
|
||||
u32 en;
|
||||
u32 maindiv;
|
||||
u32 dbgdiv;
|
||||
u32 tracediv;
|
||||
u32 l4src;
|
||||
u32 stat;
|
||||
u32 _pad_0x38_0x40[2];
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager_per_pll {
|
||||
u32 vco;
|
||||
u32 misc;
|
||||
u32 emac0clk;
|
||||
u32 emac1clk;
|
||||
u32 perqspiclk;
|
||||
u32 pernandsdmmcclk;
|
||||
u32 perbaseclk;
|
||||
u32 s2fuser1clk;
|
||||
u32 en;
|
||||
u32 div;
|
||||
u32 gpiodiv;
|
||||
u32 src;
|
||||
u32 stat;
|
||||
u32 _pad_0x34_0x40[3];
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager_sdr_pll {
|
||||
u32 vco;
|
||||
u32 ctrl;
|
||||
u32 ddrdqsclk;
|
||||
u32 ddr2xdqsclk;
|
||||
u32 ddrdqclk;
|
||||
u32 s2fuser2clk;
|
||||
u32 en;
|
||||
u32 stat;
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager_altera {
|
||||
u32 mpuclk;
|
||||
u32 mainclk;
|
||||
};
|
||||
|
||||
struct socfpga_clock_manager {
|
||||
u32 ctrl;
|
||||
u32 bypass;
|
||||
u32 inter;
|
||||
u32 intren;
|
||||
u32 dbctrl;
|
||||
u32 stat;
|
||||
u32 _pad_0x18_0x3f[10];
|
||||
struct socfpga_clock_manager_main_pll main_pll;
|
||||
struct socfpga_clock_manager_per_pll per_pll;
|
||||
struct socfpga_clock_manager_sdr_pll sdr_pll;
|
||||
struct socfpga_clock_manager_altera altera;
|
||||
u32 _pad_0xe8_0x200[70];
|
||||
};
|
||||
|
||||
/* Clock speed accessors */
|
||||
unsigned long cm_get_mpu_clk_hz(void);
|
||||
unsigned long cm_get_sdram_clk_hz(void);
|
||||
unsigned int cm_get_l4_sp_clk_hz(void);
|
||||
unsigned int cm_get_mmc_controller_clk_hz(void);
|
||||
unsigned int cm_get_qspi_controller_clk_hz(void);
|
||||
unsigned int cm_get_spi_controller_clk_hz(void);
|
||||
const unsigned int cm_get_osc_clk_hz(const int osc);
|
||||
const unsigned int cm_get_f2s_per_ref_clk_hz(void);
|
||||
const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
|
||||
|
||||
/* Clock configuration accessors */
|
||||
int cm_basic_init(const struct cm_config * const cfg);
|
||||
const struct cm_config * const cm_get_default_config(void);
|
||||
#endif /* __ASSEMBLER__ */
|
||||
|
||||
#define LOCKED_MASK \
|
||||
(CLKMGR_INTER_SDRPLLLOCKED_MASK | \
|
||||
CLKMGR_INTER_PERPLLLOCKED_MASK | \
|
||||
CLKMGR_INTER_MAINPLLLOCKED_MASK)
|
||||
|
||||
#define CLKMGR_CTRL_SAFEMODE BIT(0)
|
||||
#define CLKMGR_CTRL_SAFEMODE_OFFSET 0
|
||||
|
||||
#define CLKMGR_BYPASS_PERPLLSRC BIT(4)
|
||||
#define CLKMGR_BYPASS_PERPLLSRC_OFFSET 4
|
||||
#define CLKMGR_BYPASS_PERPLL BIT(3)
|
||||
#define CLKMGR_BYPASS_PERPLL_OFFSET 3
|
||||
#define CLKMGR_BYPASS_SDRPLLSRC BIT(2)
|
||||
#define CLKMGR_BYPASS_SDRPLLSRC_OFFSET 2
|
||||
#define CLKMGR_BYPASS_SDRPLL BIT(1)
|
||||
#define CLKMGR_BYPASS_SDRPLL_OFFSET 1
|
||||
#define CLKMGR_BYPASS_MAINPLL BIT(0)
|
||||
#define CLKMGR_BYPASS_MAINPLL_OFFSET 0
|
||||
|
||||
#define CLKMGR_INTER_MAINPLLLOST_MASK BIT(3)
|
||||
#define CLKMGR_INTER_PERPLLLOST_MASK BIT(4)
|
||||
#define CLKMGR_INTER_SDRPLLLOST_MASK BIT(5)
|
||||
#define CLKMGR_INTER_MAINPLLLOCKED_MASK BIT(6)
|
||||
#define CLKMGR_INTER_PERPLLLOCKED_MASK BIT(7)
|
||||
#define CLKMGR_INTER_SDRPLLLOCKED_MASK BIT(8)
|
||||
|
||||
#define CLKMGR_STAT_BUSY BIT(0)
|
||||
|
||||
/* Main PLL */
|
||||
#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN BIT(0)
|
||||
#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET 16
|
||||
#define CLKMGR_MAINPLLGRP_VCO_DENOM_MASK 0x003f0000
|
||||
#define CLKMGR_MAINPLLGRP_VCO_EN BIT(1)
|
||||
#define CLKMGR_MAINPLLGRP_VCO_EN_OFFSET 1
|
||||
#define CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET 3
|
||||
#define CLKMGR_MAINPLLGRP_VCO_NUMER_MASK 0x0000fff8
|
||||
#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
|
||||
#define CLKMGR_MAINPLLGRP_VCO_PWRDN BIT(2)
|
||||
#define CLKMGR_MAINPLLGRP_VCO_PWRDN_OFFSET 2
|
||||
#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
|
||||
#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK BIT(2)
|
||||
#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK BIT(4)
|
||||
#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK BIT(5)
|
||||
#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK BIT(6)
|
||||
#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK BIT(7)
|
||||
#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK BIT(9)
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_MASK 0x00000003
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET 2
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_MASK 0x0000000c
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET 4
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_MASK 0x00000070
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET 7
|
||||
#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK 0x00000380
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_MASK 0x00000003
|
||||
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET 2
|
||||
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_MASK 0x0000000c
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_MASK 0x00000007
|
||||
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_L4MP BIT(0)
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET 0
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_L4SP BIT(1)
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET 1
|
||||
#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
|
||||
#define CLKMGR_L4_SP_CLK_SRC_MAINPLL 0x0
|
||||
#define CLKMGR_L4_SP_CLK_SRC_PERPLL 0x1
|
||||
|
||||
/* Per PLL */
|
||||
#define CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET 16
|
||||
#define CLKMGR_PERPLLGRP_VCO_DENOM_MASK 0x003f0000
|
||||
#define CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET 3
|
||||
#define CLKMGR_PERPLLGRP_VCO_NUMER_MASK 0x0000fff8
|
||||
#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
|
||||
#define CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET 22
|
||||
#define CLKMGR_PERPLLGRP_VCO_PSRC_MASK 0x00c00000
|
||||
#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
|
||||
#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
|
||||
#define CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET 22
|
||||
#define CLKMGR_PERPLLGRP_VCO_SSRC_MASK 0x00c00000
|
||||
|
||||
#define CLKMGR_VCO_SSRC_EOSC1 0x0
|
||||
#define CLKMGR_VCO_SSRC_EOSC2 0x1
|
||||
#define CLKMGR_VCO_SSRC_F2S 0x2
|
||||
|
||||
#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_MASK 0x000001ff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
|
||||
#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK 0x00000100
|
||||
|
||||
#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET 6
|
||||
#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_MASK 0x000001c0
|
||||
#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET 9
|
||||
#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_MASK 0x00000e00
|
||||
#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
|
||||
#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
|
||||
#define CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_DIV_USBCLK_MASK 0x00000007
|
||||
|
||||
#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_MASK 0x00ffffff
|
||||
|
||||
#define CLKMGR_PERPLLGRP_SRC_NAND_OFFSET 2
|
||||
#define CLKMGR_PERPLLGRP_SRC_NAND_MASK 0x0000000c
|
||||
#define CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET 4
|
||||
#define CLKMGR_PERPLLGRP_SRC_QSPI_MASK 0x00000030
|
||||
#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
|
||||
#define CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET 0
|
||||
#define CLKMGR_PERPLLGRP_SRC_SDMMC_MASK 0x00000003
|
||||
#define CLKMGR_SDMMC_CLK_SRC_F2S 0x0
|
||||
#define CLKMGR_SDMMC_CLK_SRC_MAIN 0x1
|
||||
#define CLKMGR_SDMMC_CLK_SRC_PER 0x2
|
||||
#define CLKMGR_QSPI_CLK_SRC_F2S 0x0
|
||||
#define CLKMGR_QSPI_CLK_SRC_MAIN 0x1
|
||||
#define CLKMGR_QSPI_CLK_SRC_PER 0x2
|
||||
|
||||
/* SDR PLL */
|
||||
#define CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET 16
|
||||
#define CLKMGR_SDRPLLGRP_VCO_DENOM_MASK 0x003f0000
|
||||
#define CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET 3
|
||||
#define CLKMGR_SDRPLLGRP_VCO_NUMER_MASK 0x0000fff8
|
||||
#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL BIT(24)
|
||||
#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_OFFSET 24
|
||||
#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_OFFSET 25
|
||||
#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
|
||||
#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK BIT(31)
|
||||
#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
|
||||
#define CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET 22
|
||||
#define CLKMGR_SDRPLLGRP_VCO_SSRC_MASK 0x00c00000
|
||||
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET 9
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x00000e00
|
||||
|
||||
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
|
||||
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET 9
|
||||
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x00000e00
|
||||
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET 0
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET 9
|
||||
#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x00000e00
|
||||
|
||||
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET 0
|
||||
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
|
||||
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET 9
|
||||
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x00000e00
|
||||
|
||||
#endif /* _CLOCK_MANAGER_GEN5_H_ */
|
||||
@ -127,7 +127,8 @@ void board_init_f(ulong dummy)
|
||||
|
||||
debug("Reconfigure Clock Manager\n");
|
||||
/* reconfigure the PLLs */
|
||||
cm_basic_init(cm_default_cfg);
|
||||
if (cm_basic_init(cm_default_cfg))
|
||||
hang();
|
||||
|
||||
/* Enable bootrom to configure IOs. */
|
||||
sysmgr_config_warmrstcfgio(1);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user