mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 04:34:22 +08:00
mips: mtmips: add support for MediaTek MT7620 SoC
This patch adds support for MediaTek MT7620 SoC. All files are dedicated for u-boot. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
This commit is contained in:
Weijie Gao
Daniel Schwierzeck
parent
f0a865bd55
commit
dd4fdc0b14
14
arch/mips/dts/mt7620-u-boot.dtsi
Normal file
14
arch/mips/dts/mt7620-u-boot.dtsi
Normal file
@ -0,0 +1,14 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*/
|
||||
|
||||
&uartlite {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&uartfull {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
296
arch/mips/dts/mt7620.dtsi
Normal file
296
arch/mips/dts/mt7620.dtsi
Normal file
@ -0,0 +1,296 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
#include <dt-bindings/clock/mt7620-clk.h>
|
||||
#include <dt-bindings/reset/mt7620-reset.h>
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mediatek,mt7620-soc";
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
compatible = "mti,mips24KEc";
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
clk48m: clk48m@0 {
|
||||
compatible = "fixed-clock";
|
||||
|
||||
clock-frequency = <48000000>;
|
||||
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
sysc: sysc@10000000 {
|
||||
compatible = "mediatek,mt7620-sysc";
|
||||
reg = <0x10000000 0x100>;
|
||||
};
|
||||
|
||||
clkctrl: clkctrl@10000030 {
|
||||
compatible = "mediatek,mt7620-clk";
|
||||
mediatek,sysc = <&sysc>;
|
||||
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
rstctrl: rstctrl@10000034 {
|
||||
compatible = "mediatek,mtmips-reset";
|
||||
reg = <0x10000034 0x4>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
reboot: resetctl-reboot {
|
||||
compatible = "resetctl-reboot";
|
||||
|
||||
resets = <&rstctrl SYS_RST>;
|
||||
reset-names = "sysreset";
|
||||
};
|
||||
|
||||
uartfull: uartfull@10000500 {
|
||||
compatible = "mediatek,mt7620-uart";
|
||||
reg = <10000500 0x100>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uartf_gpio_pins>;
|
||||
|
||||
clocks = <&clkctrl CLK_UARTF>;
|
||||
|
||||
resets = <&rstctrl UARTF_RST>;
|
||||
reset-names = "uartf";
|
||||
|
||||
clock-frequency = <40000000>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uartlite: uartlite@10000c00 {
|
||||
compatible = "mediatek,mt7620-uart";
|
||||
reg = <0x10000c00 0x100>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uartl_pins>;
|
||||
|
||||
clocks = <&clkctrl CLK_UARTL>;
|
||||
|
||||
resets = <&rstctrl UARTL_RST>;
|
||||
reset-names = "uartl";
|
||||
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
pinctrl: pinctrl@10000060 {
|
||||
compatible = "mediatek,mt7620-pinctrl";
|
||||
reg = <0x10000060 0x4>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&state_default>;
|
||||
|
||||
state_default: pin_state {
|
||||
sutif_pins {
|
||||
groups = "sutif";
|
||||
function = "none";
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
groups = "nand";
|
||||
function = "nand";
|
||||
};
|
||||
|
||||
sd_pins: sd_pins {
|
||||
groups = "nand";
|
||||
function = "sd";
|
||||
};
|
||||
|
||||
spi_single_pins: spi_single_pins {
|
||||
groups = "spi";
|
||||
function = "spi";
|
||||
};
|
||||
|
||||
spi_dual_pins: spi_dual_pins {
|
||||
spi_master_pins {
|
||||
groups = "spi";
|
||||
function = "spi";
|
||||
};
|
||||
|
||||
spi_cs1_pin {
|
||||
groups = "spi cs1";
|
||||
function = "spi cs1";
|
||||
};
|
||||
};
|
||||
|
||||
uartl_pins: uartl_pins {
|
||||
groups = "uartl";
|
||||
function = "uartl";
|
||||
};
|
||||
|
||||
uartf_pins: uartf_pins {
|
||||
groups = "uartf";
|
||||
function = "uartf";
|
||||
};
|
||||
|
||||
uartf_pcm_pins: uartf_pcm_pins {
|
||||
groups = "uartf";
|
||||
function = "uartf pcm";
|
||||
};
|
||||
|
||||
uartf_i2s_pins: uartf_i2s_pins {
|
||||
groups = "uartf";
|
||||
function = "i2s uartf";
|
||||
};
|
||||
|
||||
uartf_gpio_pins: uartf_gpio_pins {
|
||||
groups = "uartf";
|
||||
function = "uartf gpio";
|
||||
};
|
||||
};
|
||||
|
||||
watchdog: watchdog@10000120 {
|
||||
compatible = "mediatek,mt7620-wdt";
|
||||
reg = <0x10000120 0x10>;
|
||||
|
||||
resets = <&rstctrl TIMER_RST>;
|
||||
reset-names = "wdt";
|
||||
};
|
||||
|
||||
gpio0: gpio0@10000600 {
|
||||
compatible = "mediatek,mt7620-gpio";
|
||||
reg = <0x10000600 0x34>;
|
||||
|
||||
resets = <&rstctrl PIO_RST>;
|
||||
reset-names = "pio";
|
||||
|
||||
mediatek,bank-name = "PIOA";
|
||||
mediatek,gpio-num = <24>;
|
||||
mediatek,register-map = <0x20 0x24 0x2c 0x30>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio1: gpio1@10000638 {
|
||||
compatible = "mediatek,mt7620-gpio";
|
||||
reg = <0x10000638 0x24>;
|
||||
|
||||
resets = <&rstctrl PIO_RST>;
|
||||
reset-names = "pio";
|
||||
|
||||
mediatek,bank-name = "PIOB";
|
||||
mediatek,gpio-num = <16>;
|
||||
mediatek,register-map = <0x10 0x14 0x1c 0x20>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio2: gpio2@10000660 {
|
||||
compatible = "mediatek,mt7620-gpio";
|
||||
reg = <0x10000660 0x24>;
|
||||
|
||||
resets = <&rstctrl PIO_RST>;
|
||||
reset-names = "pio";
|
||||
|
||||
mediatek,bank-name = "PIOC";
|
||||
mediatek,gpio-num = <32>;
|
||||
mediatek,register-map = <0x10 0x14 0x1c 0x20>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpio3: gpio3@10000688 {
|
||||
compatible = "mediatek,mt7620-gpio";
|
||||
reg = <0x10000688 0x24>;
|
||||
|
||||
resets = <&rstctrl PIO_RST>;
|
||||
reset-names = "pio";
|
||||
|
||||
mediatek,bank-name = "PIOD";
|
||||
mediatek,gpio-num = <1>;
|
||||
mediatek,register-map = <0x10 0x14 0x1c 0x20>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
spi0: spi@10000b00 {
|
||||
compatible = "mediatek,mt7620-spi";
|
||||
reg = <0x10000b00 0x100>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_single_pins>;
|
||||
|
||||
resets = <&rstctrl SPI_RST>;
|
||||
reset-names = "spi";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clocks = <&clkctrl CLK_SPI>;
|
||||
};
|
||||
|
||||
eth: eth@10100000 {
|
||||
compatible = "mediatek,mt7620-eth";
|
||||
reg = <0x10100000 0x10000
|
||||
0x10110000 0x8000>;
|
||||
reg-names = "fe", "esw";
|
||||
|
||||
mediatek,sysc = <&sysc>;
|
||||
|
||||
resets = <&rstctrl EPHY_RST>,
|
||||
<&rstctrl ESW_RST>,
|
||||
<&rstctrl FE_RST>;
|
||||
reset-names = "ephy", "esw", "fe";
|
||||
|
||||
clocks = <&clkctrl CLK_EPHY>,
|
||||
<&clkctrl CLK_ESW>,
|
||||
<&clkctrl CLK_FE>;
|
||||
clock-names = "ephy", "esw", "fe";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_phy: mt7620-usb-phy {
|
||||
compatible = "mediatek,mt7620-usbphy";
|
||||
|
||||
#phy-cells = <0>;
|
||||
|
||||
mediatek,sysc = <&sysc>;
|
||||
|
||||
clocks = <&clkctrl CLK_UPHY_48M>, <&clkctrl CLK_UPHY_12M>;
|
||||
clock-names = "uphy48m", "uphy12m";
|
||||
|
||||
resets = <&rstctrl UHST_RST>, <&rstctrl UDEV_RST>;
|
||||
reset-names = "uhst", "udev";
|
||||
};
|
||||
|
||||
ehci@101c0000 {
|
||||
compatible = "generic-ehci";
|
||||
reg = <0x101c0000 0x1000>;
|
||||
|
||||
phys = <&usb_phy>;
|
||||
phy-names = "usb";
|
||||
};
|
||||
|
||||
mmc: mmc@10130000 {
|
||||
compatible = "mediatek,mt7620-mmc";
|
||||
reg = <0x10130000 0x4000>;
|
||||
builtin-cd = <1>;
|
||||
r_smpl = <1>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd_pins>;
|
||||
|
||||
clocks = <&clk48m>, <&clkctrl CLK_SDHC>;
|
||||
clock-names = "source", "hclk";
|
||||
|
||||
resets = <&rstctrl SDHC_RST>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
@ -5,6 +5,7 @@ config SYS_MALLOC_F_LEN
|
||||
default 0x1000
|
||||
|
||||
config SYS_SOC
|
||||
default "mt7620" if SOC_MT7620
|
||||
default "mt7628" if SOC_MT7628
|
||||
|
||||
config SYS_DCACHE_SIZE
|
||||
@ -31,10 +32,26 @@ config SPL_PAYLOAD
|
||||
|
||||
config BUILD_TARGET
|
||||
default "u-boot-with-spl.bin" if SPL
|
||||
default "u-boot.bin"
|
||||
|
||||
choice
|
||||
prompt "MediaTek MIPS SoC select"
|
||||
|
||||
config SOC_MT7620
|
||||
bool "MT7620"
|
||||
select MIPS_L1_CACHE_SHIFT_5
|
||||
select SYS_MIPS_CACHE_INIT_RAM_LOAD
|
||||
select PINCTRL_MT7620
|
||||
select MT7620_SERIAL
|
||||
select MISC
|
||||
select SPL_SEPARATE_BSS if SPL
|
||||
select SPL_LOADER_SUPPORT if SPL
|
||||
select SPL_OF_CONTROL if SPL_DM
|
||||
select SPL_OF_PLATDATA if SPL_DM
|
||||
select SPL_DM_SERIAL if SPL_DM
|
||||
help
|
||||
This supports MediaTek MT7620.
|
||||
|
||||
config SOC_MT7628
|
||||
bool "MT7628"
|
||||
select MIPS_L1_CACHE_SHIFT_5
|
||||
@ -59,6 +76,7 @@ config SOC_MT7628
|
||||
|
||||
endchoice
|
||||
|
||||
source "arch/mips/mach-mtmips/mt7620/Kconfig"
|
||||
source "arch/mips/mach-mtmips/mt7628/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
||||
@ -5,4 +5,5 @@ obj-y += ddr_init.o
|
||||
obj-y += ddr_cal.o
|
||||
obj-$(CONFIG_SPL_BUILD) += spl.o
|
||||
|
||||
obj-$(CONFIG_SOC_MT7620) += mt7620/
|
||||
obj-$(CONFIG_SOC_MT7628) += mt7628/
|
||||
|
||||
54
arch/mips/mach-mtmips/include/mach/mt7620-sysc.h
Normal file
54
arch/mips/mach-mtmips/include/mach/mt7620-sysc.h
Normal file
@ -0,0 +1,54 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*
|
||||
* Definitions of ioctl requests of MT7620 sysc driver
|
||||
*/
|
||||
|
||||
#ifndef _MT7620_SYSC_H_
|
||||
#define _MT7620_SYSC_H_
|
||||
|
||||
#include <linux/types.h>
|
||||
|
||||
enum mt7620_sysc_requests {
|
||||
MT7620_SYSC_IOCTL_GET_CLK,
|
||||
MT7620_SYSC_IOCTL_GET_CHIP_REV,
|
||||
MT7620_SYSC_IOCTL_SET_GE1_MODE,
|
||||
MT7620_SYSC_IOCTL_SET_GE2_MODE,
|
||||
MT7620_SYSC_IOCTL_SET_USB_MODE,
|
||||
MT7620_SYSC_IOCTL_SET_PCIE_MODE
|
||||
};
|
||||
|
||||
struct mt7620_sysc_clks {
|
||||
u32 cpu_clk;
|
||||
u32 sys_clk;
|
||||
u32 xtal_clk;
|
||||
u32 peri_clk;
|
||||
};
|
||||
|
||||
struct mt7620_sysc_chip_rev {
|
||||
bool bga;
|
||||
u32 ver : 4;
|
||||
u32 eco : 4;
|
||||
};
|
||||
|
||||
enum mt7620_sysc_ge_mode {
|
||||
MT7620_SYSC_GE_RGMII,
|
||||
MT7620_SYSC_GE_MII,
|
||||
MT7620_SYSC_GE_RMII,
|
||||
MT7620_SYSC_GE_ESW_PHY,
|
||||
};
|
||||
|
||||
enum mt7620_sysc_usb_mode {
|
||||
MT7620_SYSC_USB_DEVICE_MODE,
|
||||
MT7620_SYSC_USB_HOST_MODE
|
||||
};
|
||||
|
||||
enum mt7620_sysc_pcie_mode {
|
||||
MT7620_SYSC_PCIE_EP_MODE,
|
||||
MT7620_SYSC_PCIE_RC_MODE
|
||||
};
|
||||
|
||||
#endif /* _MT7620_SYSC_H_ */
|
||||
54
arch/mips/mach-mtmips/mt7620/Kconfig
Normal file
54
arch/mips/mach-mtmips/mt7620/Kconfig
Normal file
@ -0,0 +1,54 @@
|
||||
|
||||
if SOC_MT7620
|
||||
|
||||
config DEBUG_UART_BOARD_INIT
|
||||
default y
|
||||
|
||||
choice
|
||||
prompt "Board select"
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "CPU frequency select"
|
||||
default CPU_FREQ_580MHZ
|
||||
|
||||
config CPU_FREQ_480MHZ
|
||||
bool "480MHz"
|
||||
|
||||
config CPU_FREQ_500MHZ
|
||||
bool "500MHz"
|
||||
|
||||
config CPU_FREQ_520MHZ
|
||||
bool "520MHz"
|
||||
|
||||
config CPU_FREQ_540MHZ
|
||||
bool "540MHz"
|
||||
|
||||
config CPU_FREQ_560MHZ
|
||||
bool "560MHz"
|
||||
|
||||
config CPU_FREQ_580MHZ
|
||||
bool "580MHz"
|
||||
|
||||
config CPU_FREQ_600MHZ
|
||||
bool "600MHz"
|
||||
|
||||
config CPU_FREQ_620MHZ
|
||||
bool "620MHz"
|
||||
|
||||
endchoice
|
||||
|
||||
config CPU_FREQ_MULTI
|
||||
int
|
||||
range 0 7
|
||||
default 0 if CPU_FREQ_480MHZ
|
||||
default 1 if CPU_FREQ_500MHZ
|
||||
default 2 if CPU_FREQ_520MHZ
|
||||
default 3 if CPU_FREQ_540MHZ
|
||||
default 4 if CPU_FREQ_560MHZ
|
||||
default 5 if CPU_FREQ_580MHZ
|
||||
default 6 if CPU_FREQ_600MHZ
|
||||
default 7 if CPU_FREQ_620MHZ
|
||||
|
||||
endif
|
||||
10
arch/mips/mach-mtmips/mt7620/Makefile
Normal file
10
arch/mips/mach-mtmips/mt7620/Makefile
Normal file
@ -0,0 +1,10 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
obj-y += lowlevel_init.o
|
||||
obj-y += init.o
|
||||
obj-y += dram.o
|
||||
obj-y += serial.o
|
||||
|
||||
ifndef CONFIG_SPL_BUILD
|
||||
obj-y += sysc.o
|
||||
endif
|
||||
113
arch/mips/mach-mtmips/mt7620/dram.c
Normal file
113
arch/mips/mach-mtmips/mt7620/dram.c
Normal file
@ -0,0 +1,113 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*/
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <linux/io.h>
|
||||
#include <mach/ddr.h>
|
||||
#include <mach/mc.h>
|
||||
#include "mt7620.h"
|
||||
|
||||
/* SDR parameters */
|
||||
#define SDR_CFG0_VAL 0x51B283B3
|
||||
#define SDR_CFG1_VAL 0xC00003A9
|
||||
|
||||
/* DDR2 DQ_DLY */
|
||||
#define DDR2_DQ_DLY 0x88888888
|
||||
|
||||
/* DDR2 DQS_DLY */
|
||||
#define DDR2_DQS_DLY 0x88888888
|
||||
|
||||
static const struct mc_ddr_cfg ddr1_cfgs_200mhz[] = {
|
||||
[DRAM_8MB] = { 0x34A1EB94, 0x20262324, 0x28000033, 0x00000002, 0x00000000 },
|
||||
[DRAM_16MB] = { 0x34A1EB94, 0x202A2324, 0x28000033, 0x00000002, 0x00000000 },
|
||||
[DRAM_32MB] = { 0x34A1E5CA, 0x202E2324, 0x28000033, 0x00000002, 0x00000000 },
|
||||
[DRAM_64MB] = { 0x3421E5CA, 0x20322324, 0x28000033, 0x00000002, 0x00000000 },
|
||||
[DRAM_128MB] = { 0x241B05CA, 0x20362334, 0x28000033, 0x00000002, 0x00000000 },
|
||||
};
|
||||
|
||||
static const struct mc_ddr_cfg ddr1_cfgs_160mhz[] = {
|
||||
[DRAM_8MB] = { 0x239964A1, 0x20262323, 0x00000033, 0x00000002, 0x00000000 },
|
||||
[DRAM_16MB] = { 0x239964A1, 0x202A2323, 0x00000033, 0x00000002, 0x00000000 },
|
||||
[DRAM_32MB] = { 0x239964A1, 0x202E2323, 0x00000033, 0x00000002, 0x00000000 },
|
||||
[DRAM_64MB] = { 0x239984A1, 0x20322323, 0x00000033, 0x00000002, 0x00000000 },
|
||||
[DRAM_128MB] = { 0x239AB4A1, 0x20362333, 0x00000033, 0x00000002, 0x00000000 },
|
||||
};
|
||||
|
||||
static const struct mc_ddr_cfg ddr2_cfgs_200mhz[] = {
|
||||
[DRAM_32MB] = { 0x2519E2E5, 0x222E2323, 0x68000C43, 0x00000416, 0x0000000A },
|
||||
[DRAM_64MB] = { 0x249AA2E5, 0x22322323, 0x68000C43, 0x00000416, 0x0000000A },
|
||||
[DRAM_128MB] = { 0x249B42E5, 0x22362323, 0x68000C43, 0x00000416, 0x0000000A },
|
||||
[DRAM_256MB] = { 0x249CE2E5, 0x223A2323, 0x68000C43, 0x00000416, 0x0000000A },
|
||||
};
|
||||
|
||||
static const struct mc_ddr_cfg ddr2_cfgs_160mhz[] = {
|
||||
[DRAM_32MB] = { 0x23918250, 0x222E2322, 0x40000A43, 0x00000416, 0x00000006 },
|
||||
[DRAM_64MB] = { 0x239A2250, 0x22322322, 0x40000A43, 0x00000416, 0x00000008 },
|
||||
[DRAM_128MB] = { 0x2392A250, 0x22362322, 0x40000A43, 0x00000416, 0x00000008 },
|
||||
[DRAM_256MB] = { 0x24140250, 0x223A2322, 0x40000A43, 0x00000416, 0x00000008 },
|
||||
};
|
||||
|
||||
static void mt7620_memc_reset(int assert)
|
||||
{
|
||||
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
||||
|
||||
if (assert)
|
||||
setbits_32(sysc + SYSCTL_RSTCTL_REG, MC_RST);
|
||||
else
|
||||
clrbits_32(sysc + SYSCTL_RSTCTL_REG, MC_RST);
|
||||
}
|
||||
|
||||
void mt7620_dram_init(void)
|
||||
{
|
||||
void __iomem *sysc;
|
||||
bool lspd = false;
|
||||
int ddr_type, aux;
|
||||
struct mc_ddr_init_param param;
|
||||
|
||||
sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
||||
ddr_type = (readl(sysc + SYSCTL_SYSCFG0_REG) & DRAM_TYPE_M)
|
||||
>> DRAM_TYPE_S;
|
||||
aux = readl(sysc + SYSCTL_CPLL_CFG1_REG) &
|
||||
(CPU_CLK_AUX1 | CPU_CLK_AUX0);
|
||||
|
||||
if (aux == CPU_CLK_AUX1 || aux == CPU_CLK_AUX0)
|
||||
lspd = true;
|
||||
|
||||
mt7620_memc_reset(1);
|
||||
__udelay(200);
|
||||
|
||||
param.memc = ioremap_nocache(MEMCTL_BASE, MEMCTL_SIZE);
|
||||
param.dq_dly = DDR2_DQ_DLY;
|
||||
param.dqs_dly = DDR2_DQS_DLY;
|
||||
param.mc_reset = mt7620_memc_reset;
|
||||
param.memsize = 0;
|
||||
param.bus_width = 0;
|
||||
|
||||
if (ddr_type == DRAM_DDR1) {
|
||||
if (lspd)
|
||||
param.cfgs = ddr1_cfgs_160mhz;
|
||||
else
|
||||
param.cfgs = ddr1_cfgs_200mhz;
|
||||
|
||||
ddr1_init(¶m);
|
||||
} else if (ddr_type == DRAM_DDR2) {
|
||||
if (lspd)
|
||||
param.cfgs = ddr2_cfgs_160mhz;
|
||||
else
|
||||
param.cfgs = ddr2_cfgs_200mhz;
|
||||
|
||||
ddr2_init(¶m);
|
||||
} else {
|
||||
param.sdr_cfg0 = SDR_CFG0_VAL;
|
||||
param.sdr_cfg1 = SDR_CFG1_VAL;
|
||||
|
||||
sdr_init(¶m);
|
||||
}
|
||||
}
|
||||
193
arch/mips/mach-mtmips/mt7620/init.c
Normal file
193
arch/mips/mach-mtmips/mt7620/init.c
Normal file
@ -0,0 +1,193 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <asm/global_data.h>
|
||||
#include <linux/io.h>
|
||||
#include "mt7620.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
static const char * const dram_type[] = {
|
||||
"SDRAM", "DDR", "DDR2", "SDRAM"
|
||||
};
|
||||
|
||||
static const char * const boot_mode[(CHIP_MODE_M >> CHIP_MODE_S) + 1] = {
|
||||
[1] = "NAND 4-cycles 2KB-page",
|
||||
[2] = "SPI-NOR 3-Byte Addr",
|
||||
[3] = "SPI-NOR 4-Byte Addr",
|
||||
[10] = "NAND 4-cycles 512B-page",
|
||||
[11] = "NAND 5-cycles 2KB-page",
|
||||
[12] = "NAND 3-cycles 512B-page",
|
||||
};
|
||||
|
||||
static void cpu_pll_init(void)
|
||||
{
|
||||
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
||||
u32 pllmul = CONFIG_CPU_FREQ_MULTI;
|
||||
|
||||
/* Make sure the pll multiplier is valid */
|
||||
if (pllmul > 7)
|
||||
pllmul = 7;
|
||||
|
||||
/* Set init CPU clock to 480MHz */
|
||||
clrsetbits_32(sysc + SYSCTL_CPLL_CFG1_REG, CPU_CLK_AUX1, CPU_CLK_AUX0);
|
||||
|
||||
/* Enable software control of CPU PLL */
|
||||
setbits_32(sysc + SYSCTL_CPLL_CFG0_REG, CPLL_SW_CFG);
|
||||
|
||||
/* CPU PLL power down */
|
||||
setbits_32(sysc + SYSCTL_CPLL_CFG1_REG, CPLL_PD);
|
||||
|
||||
/* PLL configuration */
|
||||
clrsetbits_32(sysc + SYSCTL_CPLL_CFG0_REG, PLL_MULT_RATIO_M |
|
||||
PLL_DIV_RATIO_M | SSC_UP_BOUND_M | SSC_EN,
|
||||
(pllmul << PLL_MULT_RATIO_S) | SSC_SWING_M);
|
||||
|
||||
/* CPU PLL power up */
|
||||
clrbits_32(sysc + SYSCTL_CPLL_CFG1_REG, CPLL_PD);
|
||||
|
||||
/* Wait for CPU PLL locked */
|
||||
while (!(readl(sysc + SYSCTL_CPLL_CFG1_REG) & CPLL_LD))
|
||||
;
|
||||
|
||||
/* Set final CPU clock source */
|
||||
clrbits_32(sysc + SYSCTL_CPLL_CFG1_REG, CPU_CLK_AUX1 | CPU_CLK_AUX0);
|
||||
|
||||
/* Adjust CPU clock */
|
||||
clrsetbits_32(sysc + SYSCTL_CPU_SYS_CLKCFG_REG,
|
||||
CPU_FDIV_M | CPU_FFRAC_M,
|
||||
(1 << CPU_FDIV_S) | (1 << CPU_FFRAC_S));
|
||||
}
|
||||
|
||||
void mt7620_init(void)
|
||||
{
|
||||
u32 cpu_clk;
|
||||
|
||||
cpu_pll_init();
|
||||
|
||||
/*
|
||||
* Set timer freq, which will be used during DRAM initialization
|
||||
* Note that this function is using a temporary gd which will be
|
||||
* destroyed after leaving this function.
|
||||
*/
|
||||
mt7620_get_clks(&cpu_clk, NULL, NULL);
|
||||
gd->arch.timer_freq = cpu_clk / 2;
|
||||
|
||||
mt7620_dram_init();
|
||||
}
|
||||
|
||||
void mt7620_get_clks(u32 *cpu_clk, u32 *sys_clk, u32 *xtal_clk)
|
||||
{
|
||||
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
||||
u32 val, multi, div, fdiv, ffrac, dram_type, sys_div;
|
||||
u32 cpu_freq, xtal_freq;
|
||||
|
||||
static const u32 div_ratio_table[] = {2, 3, 4, 8};
|
||||
|
||||
val = readl(sysc + SYSCTL_SYSCFG0_REG);
|
||||
|
||||
dram_type = (val & DRAM_TYPE_M) >> DRAM_TYPE_S;
|
||||
|
||||
if (val & XTAL_FREQ_SEL)
|
||||
xtal_freq = 40000000;
|
||||
else
|
||||
xtal_freq = 20000000;
|
||||
|
||||
val = readl(sysc + SYSCTL_CPLL_CFG1_REG);
|
||||
if (val & CPU_CLK_AUX1) {
|
||||
cpu_freq = xtal_freq;
|
||||
} else if (val & CPU_CLK_AUX0) {
|
||||
cpu_freq = 480000000;
|
||||
} else {
|
||||
val = readl(sysc + SYSCTL_CPLL_CFG0_REG);
|
||||
if (val & CPLL_SW_CFG) {
|
||||
multi = (val & PLL_MULT_RATIO_M) >> PLL_MULT_RATIO_S;
|
||||
div = (val & PLL_DIV_RATIO_M) >> PLL_DIV_RATIO_S;
|
||||
cpu_freq = (multi + 24) * 40000000 /
|
||||
div_ratio_table[div];
|
||||
} else {
|
||||
cpu_freq = 600000000;
|
||||
}
|
||||
}
|
||||
|
||||
val = readl(sysc + SYSCTL_CUR_CLK_STS_REG);
|
||||
ffrac = (val & CUR_CPU_FFRAC_M) >> CUR_CPU_FFRAC_S;
|
||||
fdiv = (val & CUR_CPU_FDIV_M) >> CUR_CPU_FDIV_S;
|
||||
cpu_freq = (cpu_freq * ffrac) / fdiv;
|
||||
|
||||
switch (dram_type) {
|
||||
case DRAM_SDRAM_E1:
|
||||
sys_div = 4;
|
||||
break;
|
||||
case DRAM_DDR1:
|
||||
case DRAM_DDR2:
|
||||
sys_div = 3;
|
||||
break;
|
||||
case DRAM_SDRAM:
|
||||
sys_div = 5;
|
||||
break;
|
||||
}
|
||||
|
||||
if (cpu_clk)
|
||||
*cpu_clk = cpu_freq;
|
||||
|
||||
if (sys_clk)
|
||||
*sys_clk = cpu_freq / sys_div;
|
||||
|
||||
if (xtal_clk)
|
||||
*xtal_clk = xtal_freq;
|
||||
}
|
||||
|
||||
int print_cpuinfo(void)
|
||||
{
|
||||
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
||||
u32 cpu_clk, bus_clk, xtal_clk;
|
||||
u32 val, ver, eco, pkg, dram, chipmode;
|
||||
const char *bootdev;
|
||||
|
||||
val = readl(sysc + SYSCTL_CHIP_REV_ID_REG);
|
||||
ver = (val & VER_M) >> VER_S;
|
||||
eco = (val & ECO_M) >> ECO_S;
|
||||
pkg = !!(val & PKG_ID);
|
||||
|
||||
val = readl(sysc + SYSCTL_SYSCFG0_REG);
|
||||
dram = (val & DRAM_TYPE_M) >> DRAM_TYPE_S;
|
||||
chipmode = (val & CHIP_MODE_M) >> CHIP_MODE_S;
|
||||
|
||||
bootdev = boot_mode[chipmode];
|
||||
if (!bootdev)
|
||||
bootdev = "Unsupported boot mode";
|
||||
|
||||
printf("CPU: MediaTek MT7620%c ver:%u eco:%u\n",
|
||||
pkg ? 'A' : 'N', ver, eco);
|
||||
|
||||
printf("Boot: %s, %s\n", dram_type[dram], bootdev);
|
||||
|
||||
mt7620_get_clks(&cpu_clk, &bus_clk, &xtal_clk);
|
||||
|
||||
/* Set final timer frequency */
|
||||
gd->arch.timer_freq = cpu_clk / 2;
|
||||
|
||||
printf("Clock: CPU: %uMHz, Bus: %uMHz, XTAL: %uMHz\n",
|
||||
cpu_clk / 1000000, bus_clk / 1000000, xtal_clk / 1000000);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
ulong notrace get_tbclk(void)
|
||||
{
|
||||
return gd->arch.timer_freq;
|
||||
}
|
||||
|
||||
void _machine_restart(void)
|
||||
{
|
||||
void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
||||
|
||||
while (1)
|
||||
writel(SYS_RST, sysc + SYSCTL_RSTCTL_REG);
|
||||
}
|
||||
53
arch/mips/mach-mtmips/mt7620/lowlevel_init.S
Normal file
53
arch/mips/mach-mtmips/mt7620/lowlevel_init.S
Normal file
@ -0,0 +1,53 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <asm-offsets.h>
|
||||
#include <asm/regdef.h>
|
||||
#include <asm/asm.h>
|
||||
|
||||
.set noreorder
|
||||
|
||||
NESTED(lowlevel_init, 0, ra)
|
||||
/* Save ra and do real lowlevel initialization */
|
||||
move s0, ra
|
||||
|
||||
/*
|
||||
* Use SRAM from 802.11n MAC/BBP, 16KiB (0x10184000 ~ 0x10187fff)
|
||||
* NOTE: non-word operations may fail in this SRAM.
|
||||
* Use it as stack only for CPU/DRAM init which only has word operations.
|
||||
*/
|
||||
PTR_LI sp, 0xb0187f00
|
||||
|
||||
/* We still need a temporary gd for udelay */
|
||||
PTR_SUBU \
|
||||
sp, sp, GD_SIZE # reserve space for gd
|
||||
li t0, -16
|
||||
and sp, sp, t0 # force 16 byte alignment
|
||||
move k0, sp # save gd pointer
|
||||
|
||||
move fp, sp
|
||||
|
||||
/* Clear gd */
|
||||
move t0, k0
|
||||
1:
|
||||
PTR_S zero, 0(t0)
|
||||
PTR_ADDIU t0, PTRSIZE
|
||||
blt t0, t1, 1b
|
||||
nop
|
||||
|
||||
/* Do CPU & DRAM initialization */
|
||||
PTR_LA t9, mt7620_init
|
||||
jalr t9
|
||||
nop
|
||||
|
||||
/* Restore ra */
|
||||
move ra, s0
|
||||
|
||||
jr ra
|
||||
nop
|
||||
END(lowlevel_init)
|
||||
103
arch/mips/mach-mtmips/mt7620/mt7620.h
Normal file
103
arch/mips/mach-mtmips/mt7620/mt7620.h
Normal file
@ -0,0 +1,103 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*/
|
||||
|
||||
#ifndef _MT7620_H_
|
||||
#define _MT7620_H_
|
||||
|
||||
#include <linux/bitops.h>
|
||||
|
||||
#define SYSCTL_BASE 0x10000000
|
||||
#define SYSCTL_SIZE 0x100
|
||||
#define MEMCTL_BASE 0x10000300
|
||||
#define MEMCTL_SIZE 0x100
|
||||
#define UARTFULL_BASE 0x10000500
|
||||
#define UARTFULL_SIZE 0x100
|
||||
#define UARTLITE_BASE 0x10000c00
|
||||
#define UARTLITE_SIZE 0x100
|
||||
|
||||
#define SYSCTL_CHIP_REV_ID_REG 0x0c
|
||||
#define PKG_ID BIT(16)
|
||||
#define PKG_ID_A 1
|
||||
#define PKG_ID_N 0
|
||||
#define VER_S 8
|
||||
#define VER_M GENMASK(11, 8)
|
||||
#define ECO_S 0
|
||||
#define ECO_M GENMASK(3, 0)
|
||||
|
||||
#define SYSCTL_SYSCFG0_REG 0x10
|
||||
#define XTAL_FREQ_SEL BIT(6)
|
||||
#define XTAL_40MHZ 1
|
||||
#define XTAL_20MHZ 0
|
||||
#define DRAM_TYPE_S 4
|
||||
#define DRAM_TYPE_M GENMASK(5, 4)
|
||||
#define DRAM_SDRAM 3
|
||||
#define DRAM_DDR2 2
|
||||
#define DRAM_DDR1 1
|
||||
#define DRAM_SDRAM_E1 0
|
||||
#define CHIP_MODE_S 0
|
||||
#define CHIP_MODE_M GENMASK(3, 0)
|
||||
|
||||
#define SYSCTL_SYSCFG1_REG 0x14
|
||||
#define GE2_MODE_S 14
|
||||
#define GE2_MODE_M GENMASK(15, 14)
|
||||
#define GE1_MODE_S 12
|
||||
#define GE1_MODE_M GENMASK(13, 12)
|
||||
#define USB0_HOST_MODE BIT(10)
|
||||
#define PCIE_RC_MODE BIT(8)
|
||||
#define GE_MODE_M GENMASK(1, 0)
|
||||
|
||||
#define SYSCTL_RSTCTL_REG 0x34
|
||||
#define MC_RST BIT(10)
|
||||
#define SYS_RST BIT(0)
|
||||
|
||||
#define SYSCTL_CLKCFG0_REG 0x2c
|
||||
#define PERI_CLK_SEL BIT(4)
|
||||
|
||||
#define SYSCTL_CPU_SYS_CLKCFG_REG 0x3c
|
||||
#define CPU_OCP_RATIO_S 16
|
||||
#define CPU_OCP_RATIO_M GENMASK(19, 16)
|
||||
#define CPU_FDIV_S 8
|
||||
#define CPU_FDIV_M GENMASK(12, 8)
|
||||
#define CPU_FFRAC_S 0
|
||||
#define CPU_FFRAC_M GENMASK(4, 0)
|
||||
|
||||
#define SYSCTL_CUR_CLK_STS_REG 0x44
|
||||
#define CUR_CPU_OCP_RATIO_S 16
|
||||
#define CUR_CPU_OCP_RATIO_M GENMASK(19, 16)
|
||||
#define CUR_CPU_FDIV_S 8
|
||||
#define CUR_CPU_FDIV_M GENMASK(12, 8)
|
||||
#define CUR_CPU_FFRAC_S 0
|
||||
#define CUR_CPU_FFRAC_M GENMASK(4, 0)
|
||||
|
||||
#define SYSCTL_CPLL_CFG0_REG 0x54
|
||||
#define CPLL_SW_CFG BIT(31)
|
||||
#define PLL_MULT_RATIO_S 16
|
||||
#define PLL_MULT_RATIO_M GENMASK(18, 16)
|
||||
#define PLL_DIV_RATIO_S 10
|
||||
#define PLL_DIV_RATIO_M GENMASK(11, 10)
|
||||
#define SSC_UP_BOUND_S 8
|
||||
#define SSC_UP_BOUND_M GENMASK(9, 8)
|
||||
#define SSC_EN BIT(7)
|
||||
#define SSC_SWING_S 4
|
||||
#define SSC_SWING_M GENMASK(6, 4)
|
||||
|
||||
#define SYSCTL_CPLL_CFG1_REG 0x58
|
||||
#define CPLL_PD BIT(26)
|
||||
#define CPU_CLK_AUX1 BIT(25)
|
||||
#define CPU_CLK_AUX0 BIT(24)
|
||||
#define CPLL_LD BIT(23)
|
||||
|
||||
#define SYSCTL_GPIOMODE_REG 0x60
|
||||
#define UARTL_GPIO_MODE BIT(5)
|
||||
#define UARTF_SHARE_MODE_S 2
|
||||
#define UARTF_SHARE_MODE_M GENMASK(4, 2)
|
||||
#define UARTF_MODE_UARTF_GPIO 5
|
||||
|
||||
void mt7620_dram_init(void);
|
||||
void mt7620_get_clks(u32 *cpu_clk, u32 *sys_clk, u32 *xtal_clk);
|
||||
|
||||
#endif /* _MT7620_H_ */
|
||||
36
arch/mips/mach-mtmips/mt7620/serial.c
Normal file
36
arch/mips/mach-mtmips/mt7620/serial.c
Normal file
@ -0,0 +1,36 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*/
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/addrspace.h>
|
||||
#include "mt7620.h"
|
||||
|
||||
void board_debug_uart_init(void)
|
||||
{
|
||||
void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
||||
|
||||
#if CONFIG_DEBUG_UART_BASE == 0xb0000500 /* KSEG1ADDR(UARTFULL_BASE) */
|
||||
clrsetbits_32(base + SYSCTL_GPIOMODE_REG, UARTF_SHARE_MODE_M,
|
||||
UARTF_MODE_UARTF_GPIO << UARTF_SHARE_MODE_S);
|
||||
#else
|
||||
clrbits_32(base + SYSCTL_GPIOMODE_REG, UARTL_GPIO_MODE);
|
||||
#endif
|
||||
}
|
||||
|
||||
void mtmips_spl_serial_init(void)
|
||||
{
|
||||
#ifdef CONFIG_SPL_SERIAL_SUPPORT
|
||||
void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
|
||||
|
||||
#if CONFIG_CONS_INDEX == 1
|
||||
clrbits_32(base + SYSCTL_GPIOMODE_REG, UARTL_GPIO_MODE);
|
||||
#elif CONFIG_CONS_INDEX == 2
|
||||
clrsetbits_32(base + SYSCTL_GPIOMODE_REG, UARTF_SHARE_MODE_M,
|
||||
UARTF_MODE_UARTF_GPIO << UARTF_SHARE_MODE_S);
|
||||
#endif
|
||||
#endif /* CONFIG_SPL_SERIAL_SUPPORT */
|
||||
}
|
||||
172
arch/mips/mach-mtmips/mt7620/sysc.c
Normal file
172
arch/mips/mach-mtmips/mt7620/sysc.c
Normal file
@ -0,0 +1,172 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*
|
||||
* Misc driver for manipulating System control registers
|
||||
*/
|
||||
|
||||
#include <dm.h>
|
||||
#include <misc.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/addrspace.h>
|
||||
#include <dm/device_compat.h>
|
||||
#include <mach/mt7620-sysc.h>
|
||||
#include "mt7620.h"
|
||||
|
||||
struct mt7620_sysc_priv {
|
||||
void __iomem *base;
|
||||
};
|
||||
|
||||
static int mt7620_sysc_read(struct udevice *dev, int offset, void *buf,
|
||||
int size)
|
||||
{
|
||||
struct mt7620_sysc_priv *priv = dev_get_priv(dev);
|
||||
u32 val;
|
||||
|
||||
if (offset % sizeof(u32) || size != sizeof(u32) ||
|
||||
offset >= SYSCTL_SIZE)
|
||||
return -EINVAL;
|
||||
|
||||
val = readl(priv->base + offset);
|
||||
|
||||
if (buf)
|
||||
*(u32 *)buf = val;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mt7620_sysc_write(struct udevice *dev, int offset, const void *buf,
|
||||
int size)
|
||||
{
|
||||
struct mt7620_sysc_priv *priv = dev_get_priv(dev);
|
||||
u32 val;
|
||||
|
||||
if (offset % sizeof(u32) || size != sizeof(u32) ||
|
||||
offset >= SYSCTL_SIZE || !buf)
|
||||
return -EINVAL;
|
||||
|
||||
val = *(u32 *)buf;
|
||||
writel(val, priv->base + offset);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mt7620_sysc_ioctl(struct udevice *dev, unsigned long request,
|
||||
void *buf)
|
||||
{
|
||||
struct mt7620_sysc_priv *priv = dev_get_priv(dev);
|
||||
struct mt7620_sysc_chip_rev *chip_rev;
|
||||
struct mt7620_sysc_clks *clks;
|
||||
u32 val, shift;
|
||||
|
||||
if (!buf)
|
||||
return -EINVAL;
|
||||
|
||||
switch (request) {
|
||||
case MT7620_SYSC_IOCTL_GET_CLK:
|
||||
clks = buf;
|
||||
mt7620_get_clks(&clks->cpu_clk, &clks->sys_clk,
|
||||
&clks->xtal_clk);
|
||||
|
||||
val = readl(priv->base + SYSCTL_CLKCFG0_REG);
|
||||
if (val & PERI_CLK_SEL)
|
||||
clks->peri_clk = clks->xtal_clk;
|
||||
else
|
||||
clks->peri_clk = 40000000;
|
||||
|
||||
return 0;
|
||||
|
||||
case MT7620_SYSC_IOCTL_GET_CHIP_REV:
|
||||
chip_rev = buf;
|
||||
|
||||
val = readl(priv->base + SYSCTL_CHIP_REV_ID_REG);
|
||||
|
||||
chip_rev->bga = !!(val & PKG_ID);
|
||||
chip_rev->ver = (val & VER_M) >> VER_S;
|
||||
chip_rev->eco = (val & ECO_M) >> ECO_S;
|
||||
|
||||
return 0;
|
||||
|
||||
case MT7620_SYSC_IOCTL_SET_GE1_MODE:
|
||||
case MT7620_SYSC_IOCTL_SET_GE2_MODE:
|
||||
val = *(u32 *)buf;
|
||||
|
||||
if (val > MT7620_SYSC_GE_ESW_PHY)
|
||||
return -EINVAL;
|
||||
|
||||
if (request == MT7620_SYSC_IOCTL_SET_GE1_MODE)
|
||||
shift = GE1_MODE_S;
|
||||
else
|
||||
shift = GE2_MODE_S;
|
||||
|
||||
clrsetbits_32(priv->base + SYSCTL_SYSCFG1_REG,
|
||||
GE_MODE_M << shift, val << shift);
|
||||
|
||||
return 0;
|
||||
|
||||
case MT7620_SYSC_IOCTL_SET_USB_MODE:
|
||||
val = *(u32 *)buf;
|
||||
|
||||
if (val == MT7620_SYSC_USB_DEVICE_MODE)
|
||||
val = 0;
|
||||
else if (val == MT7620_SYSC_USB_HOST_MODE)
|
||||
val = USB0_HOST_MODE;
|
||||
|
||||
clrsetbits_32(priv->base + SYSCTL_SYSCFG1_REG,
|
||||
USB0_HOST_MODE, val);
|
||||
|
||||
return 0;
|
||||
|
||||
case MT7620_SYSC_IOCTL_SET_PCIE_MODE:
|
||||
val = *(u32 *)buf;
|
||||
|
||||
if (val == MT7620_SYSC_PCIE_EP_MODE)
|
||||
val = 0;
|
||||
else if (val == MT7620_SYSC_PCIE_RC_MODE)
|
||||
val = PCIE_RC_MODE;
|
||||
|
||||
clrsetbits_32(priv->base + SYSCTL_SYSCFG1_REG,
|
||||
PCIE_RC_MODE, val);
|
||||
|
||||
return 0;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static int mt7620_sysc_probe(struct udevice *dev)
|
||||
{
|
||||
struct mt7620_sysc_priv *priv = dev_get_priv(dev);
|
||||
|
||||
priv->base = dev_remap_addr_index(dev, 0);
|
||||
if (!priv->base) {
|
||||
dev_err(dev, "failed to map sysc registers\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct misc_ops mt7620_sysc_ops = {
|
||||
.read = mt7620_sysc_read,
|
||||
.write = mt7620_sysc_write,
|
||||
.ioctl = mt7620_sysc_ioctl,
|
||||
};
|
||||
|
||||
static const struct udevice_id mt7620_sysc_ids[] = {
|
||||
{ .compatible = "mediatek,mt7620-sysc" },
|
||||
{ }
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(mt7620_sysc) = {
|
||||
.name = "mt7620_sysc",
|
||||
.id = UCLASS_MISC,
|
||||
.of_match = mt7620_sysc_ids,
|
||||
.probe = mt7620_sysc_probe,
|
||||
.ops = &mt7620_sysc_ops,
|
||||
.priv_auto = sizeof(struct mt7620_sysc_priv),
|
||||
.flags = DM_FLAG_PRE_RELOC,
|
||||
};
|
||||
46
include/configs/mt7620.h
Normal file
46
include/configs/mt7620.h
Normal file
@ -0,0 +1,46 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (C) 2020 MediaTek Inc. All Rights Reserved.
|
||||
*
|
||||
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_MT7620_H
|
||||
#define __CONFIG_MT7620_H
|
||||
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
#define CONFIG_SYS_MIPS_TIMER_FREQ 290000000
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||||
|
||||
#define CONFIG_SYS_MALLOC_LEN 0x100000
|
||||
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x80010000
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
|
||||
|
||||
#define CONFIG_SYS_BOOTM_LEN 0x1000000
|
||||
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_CBSIZE 1024
|
||||
|
||||
/* Serial common */
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||||
|
||||
/* SPL */
|
||||
#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SPL_BSS_START_ADDR 0x80010000
|
||||
#define CONFIG_SPL_BSS_MAX_SIZE 0x10000
|
||||
#define CONFIG_SPL_MAX_SIZE 0x10000
|
||||
#define CONFIG_SPL_PAD_TO 0
|
||||
|
||||
/* Dummy value */
|
||||
#define CONFIG_SYS_UBOOT_BASE 0
|
||||
|
||||
#endif /* __CONFIG_MT7620_H */
|
||||
Loading…
Reference in New Issue
Block a user