Merge branch 'master' of git://git.denx.de/u-boot-x86

2024-11-24 12:44:23 +08:00 · 2015-02-10 10:42:56 -05:00 · 2015-02-10 10:42:56 -05:00 · db7a7dee68
commit db7a7dee68
parent c956662cc3 ba877efb80
102 changed files with 11497 additions and 272 deletions
--- a/5
+++ b/5
@ -729,8 +729,9 @@ ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
 endif
 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf

-# We can't do this yet due to the need for binary blobs
-# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+ifneq ($(BUILD_ROM),)
+ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+endif

 # enable combined SPL/u-boot/dtb rules for tegra
 ifneq ($(CONFIG_TEGRA),)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@ -41,6 +41,30 @@ config TARGET_CROWNBAY
 	  Intel Platform Controller Hub EG20T, other system components and
 	  peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.

+config TARGET_MINNOWMAX
+	bool "Support Intel Minnowboard MAX"
+	help
+	  This is the Intel Minnowboard MAX. It contains an Atom E3800
+	  processor in a small form factor with Ethernet, micro-SD, USB 2,
+	  USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
+	  It requires some binary blobs - see README.x86 for details.
+
+	  Note that PCIE_ECAM_BASE is set up by the FSP so the value used
+	  by U-Boot matches that value.
+
+config TARGET_GALILEO
+	bool "Support Intel Galileo"
+	help
+	  This is the Intel Galileo board, which is the first in a family of
+	  Arduino-certified development and prototyping boards based on Intel
+	  architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
+	  single-core, single-thread, Intel Pentium processor instrunction set
+	  architecture (ISA) compatible, operating at speeds up to 400Mhz,
+	  along with 256MB DDR3 memory. It supports a wide range of industry
+	  standard I/O interfaces, including a full-sized mini-PCIe slot,
+	  one 100Mb Ethernet port, a microSD card slot, a USB host port and
+	  a USB client port.
+
 endchoice

 config RAMBASE
@ -324,6 +348,54 @@ config FRAMEBUFFER_VESA_MODE

 endmenu

+config HAVE_FSP
+	bool "Add an Firmware Support Package binary"
+	help
+	  Select this option to add an Firmware Support Package binary to
+	  the resulting U-Boot image. It is a binary blob which U-Boot uses
+	  to set up SDRAM and other chipset specific initialization.
+
+	  Note: Without this binary U-Boot will not be able to set up its
+	  SDRAM so will not boot.
+
+config FSP_FILE
+	string "Firmware Support Package binary filename"
+	depends on HAVE_FSP
+	default "fsp.bin"
+	help
+	  The filename of the file to use as Firmware Support Package binary
+	  in the board directory.
+
+config FSP_ADDR
+	hex "Firmware Support Package binary location"
+	depends on HAVE_FSP
+	default 0xfffc0000
+	help
+	  FSP is not Position Independent Code (PIC) and the whole FSP has to
+	  be rebased if it is placed at a location which is different from the
+	  perferred base address specified during the FSP build. Use Intel's
+	  Binary Configuration Tool (BCT) to do the rebase.
+
+	  The default base address of 0xfffc0000 indicates that the binary must
+	  be located at offset 0xc0000 from the beginning of a 1MB flash device.
+
+config FSP_TEMP_RAM_ADDR
+	hex
+	default 0x2000000
+	help
+	  Stack top address which is used in FspInit after DRAM is ready and
+	  CAR is disabled.
+
+source "arch/x86/cpu/baytrail/Kconfig"
+
+source "arch/x86/cpu/coreboot/Kconfig"
+
+source "arch/x86/cpu/ivybridge/Kconfig"
+
+source "arch/x86/cpu/quark/Kconfig"
+
+source "arch/x86/cpu/queensbay/Kconfig"
+
 config TSC_CALIBRATION_BYPASS
 	bool "Bypass Time-Stamp Counter (TSC) calibration"
 	default n
@ -344,16 +416,28 @@ config TSC_FREQ_IN_MHZ
 	help
 	  The running frequency in MHz of Time-Stamp Counter (TSC).

-source "arch/x86/cpu/coreboot/Kconfig"
-
-source "arch/x86/cpu/ivybridge/Kconfig"
-
-source "arch/x86/cpu/queensbay/Kconfig"
-
 source "board/coreboot/coreboot/Kconfig"

 source "board/google/chromebook_link/Kconfig"

 source "board/intel/crownbay/Kconfig"

+source "board/intel/minnowmax/Kconfig"
+
+source "board/intel/galileo/Kconfig"
+
+config PCIE_ECAM_BASE
+	hex
+	default 0xe0000000
+	help
+	  This is the memory-mapped address of PCI configuration space, which
+	  is only available through the Enhanced Configuration Access
+	  Mechanism (ECAM) with PCI Express. It can be set up almost
+	  anywhere. Before it is set up, it is possible to access PCI
+	  configuration space through I/O access, but memory access is more
+	  convenient. Using this, PCI can be scanned and configured. This
+	  should be set to a region that does not conflict with memory
+	  assigned to PCI devices - i.e. the memory and prefetch regions, as
+	  passed to pci_set_region().
+
 endmenu
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@ -12,9 +12,11 @@ extra-y	= start.o
 obj-$(CONFIG_X86_RESET_VECTOR) += resetvec.o start16.o
 obj-y	+= interrupts.o cpu.o call64.o

+obj-$(CONFIG_INTEL_BAYTRAIL) += baytrail/
 obj-$(CONFIG_SYS_COREBOOT) += coreboot/
 obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/
 obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/
+obj-$(CONFIG_INTEL_QUARK) += quark/
 obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
 obj-y += lapic.o
 obj-y += mtrr.o
--- a/arch/x86/cpu/baytrail/Kconfig
+++ b/arch/x86/cpu/baytrail/Kconfig
@ -0,0 +1,9 @@
+#
+# Copyright (C) 2015 Google, Inc
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+config INTEL_BAYTRAIL
+	bool
+	select HAVE_FSP
--- a/arch/x86/cpu/baytrail/Makefile
+++ b/arch/x86/cpu/baytrail/Makefile
@ -0,0 +1,10 @@
+#
+# Copyright (C) 2015 Google, Inc
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += early_uart.o
+obj-y += fsp_configs.o
+obj-y += pci.o
+obj-y += valleyview.o
--- a/arch/x86/cpu/baytrail/early_uart.c
+++ b/arch/x86/cpu/baytrail/early_uart.c
@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+
+#define PCI_DEV_CONFIG(segbus, dev, fn) ( \
+		(((segbus) & 0xfff) << 20) | \
+		(((dev) & 0x1f) << 15) | \
+		(((fn)  & 0x07) << 12))
+
+/* Platform Controller Unit */
+#define LPC_DEV			0x1f
+#define LPC_FUNC		0
+
+/* Enable UART */
+#define UART_CONT		0x80
+
+/* SCORE Pad definitions */
+#define UART_RXD_PAD			82
+#define UART_TXD_PAD			83
+
+/* Pad base: PAD_CONF0[n]= PAD_BASE + 16 * n */
+#define GPSCORE_PAD_BASE	(IO_BASE_ADDRESS + IO_BASE_OFFSET_GPSCORE)
+
+/* IO Memory */
+#define IO_BASE_ADDRESS			0xfed0c000
+#define  IO_BASE_OFFSET_GPSCORE		0x0000
+#define  IO_BASE_OFFSET_GPNCORE		0x1000
+#define  IO_BASE_OFFSET_GPSSUS		0x2000
+#define IO_BASE_SIZE			0x4000
+
+static inline unsigned int score_pconf0(int pad_num)
+{
+	return GPSCORE_PAD_BASE + pad_num * 16;
+}
+
+static void score_select_func(int pad, int func)
+{
+	uint32_t reg;
+	uint32_t pconf0_addr = score_pconf0(pad);
+
+	reg = readl(pconf0_addr);
+	reg &= ~0x7;
+	reg |= func & 0x7;
+	writel(reg, pconf0_addr);
+}
+
+static void pci_write_config32(int dev, unsigned int where, u32 value)
+{
+	unsigned long addr;
+
+	addr = CONFIG_PCIE_ECAM_BASE | dev | (where & ~3);
+	writel(value, addr);
+}
+
+/* This can be called after memory-mapped PCI is working */
+int setup_early_uart(void)
+{
+	/* Enable the legacy UART hardware. */
+	pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT, 1);
+
+	/*
+	 * Set up the pads to the UART function. This allows the signals to
+	 * leave the chip
+	 */
+	score_select_func(UART_RXD_PAD, 1);
+	score_select_func(UART_TXD_PAD, 1);
+
+	/* TODO(sjg@chromium.org): Call debug_uart_init() */
+
+	return 0;
+}
--- a/arch/x86/cpu/baytrail/fsp_configs.c
+++ b/arch/x86/cpu/baytrail/fsp_configs.c
@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#include <common.h>
+#include <asm/arch/fsp/azalia.h>
+#include <asm/fsp/fsp_support.h>
+
+/* ALC262 Verb Table - 10EC0262 */
+static const uint32_t verb_table_data13[] = {
+	/* Pin Complex (NID 0x11) */
+	0x01171cf0,
+	0x01171d11,
+	0x01171e11,
+	0x01171f41,
+	/* Pin Complex (NID 0x12) */
+	0x01271cf0,
+	0x01271d11,
+	0x01271e11,
+	0x01271f41,
+	/* Pin Complex (NID 0x14) */
+	0x01471c10,
+	0x01471d40,
+	0x01471e01,
+	0x01471f01,
+	/* Pin Complex (NID 0x15) */
+	0x01571cf0,
+	0x01571d11,
+	0x01571e11,
+	0x01571f41,
+	/* Pin Complex (NID 0x16) */
+	0x01671cf0,
+	0x01671d11,
+	0x01671e11,
+	0x01671f41,
+	/* Pin Complex (NID 0x18) */
+	0x01871c20,
+	0x01871d98,
+	0x01871ea1,
+	0x01871f01,
+	/* Pin Complex (NID 0x19) */
+	0x01971c21,
+	0x01971d98,
+	0x01971ea1,
+	0x01971f02,
+	/* Pin Complex (NID 0x1A) */
+	0x01a71c2f,
+	0x01a71d30,
+	0x01a71e81,
+	0x01a71f01,
+	/* Pin Complex */
+	0x01b71c1f,
+	0x01b71d40,
+	0x01b71e21,
+	0x01b71f02,
+	/* Pin Complex */
+	0x01c71cf0,
+	0x01c71d11,
+	0x01c71e11,
+	0x01c71f41,
+	/* Pin Complex */
+	0x01d71c01,
+	0x01d71dc6,
+	0x01d71e14,
+	0x01d71f40,
+	/* Pin Complex */
+	0x01e71cf0,
+	0x01e71d11,
+	0x01e71e11,
+	0x01e71f41,
+	/* Pin Complex */
+	0x01f71cf0,
+	0x01f71d11,
+	0x01f71e11,
+	0x01f71f41,
+};
+
+/*
+ * This needs to be in ROM since if we put it in CAR, FSP init loses it when
+ * it drops CAR.
+ *
+ * TODO(sjg@chromium.org): Move to device tree when FSP allows it
+ *
+ * VerbTable: (RealTek ALC262)
+ * Revision ID = 0xFF, support all steps
+ * Codec Verb Table For AZALIA
+ * Codec Address: CAd value (0/1/2)
+ * Codec Vendor: 0x10EC0262
+ */
+static const struct pch_azalia_verb_table azalia_verb_table[] = {
+	{
+		{
+			0x10ec0262,
+			0x0000,
+			0xff,
+			0x01,
+			0x000b,
+			0x0002,
+		},
+		verb_table_data13
+	}
+};
+
+const struct pch_azalia_config azalia_config = {
+	.pme_enable = 1,
+	.docking_supported = 1,
+	.docking_attached = 0,
+	.hdmi_codec_enable = 1,
+	.azalia_v_ci_enable = 1,
+	.rsvdbits = 0,
+	.azalia_verb_table_num = 1,
+	.azalia_verb_table = azalia_verb_table,
+	.reset_wait_timer_us = 300
+};
+
+void update_fsp_upd(struct upd_region *fsp_upd)
+{
+	struct memory_down_data *mem;
+
+	/*
+	 * Configure everything here to avoid the poor hard-pressed user
+	 * needing to run Intel's binary configuration tool. It may also allow
+	 * us to support the 1GB single core variant easily.
+	 *
+	 * TODO(sjg@chromium.org): Move to device tree
+	 */
+	fsp_upd->mrc_init_tseg_size = 8;
+	fsp_upd->mrc_init_mmio_size = 0x800;
+	fsp_upd->emmc_boot_mode = 0xff;
+	fsp_upd->enable_sdio = 1;
+	fsp_upd->enable_sdcard = 1;
+	fsp_upd->enable_hsuart0 = 1;
+	fsp_upd->azalia_config_ptr = (uint32_t)&azalia_config;
+	fsp_upd->enable_i2_c0 = 0;
+	fsp_upd->enable_i2_c2 = 0;
+	fsp_upd->enable_i2_c3 = 0;
+	fsp_upd->enable_i2_c4 = 0;
+	fsp_upd->enable_xhci = 0;
+	fsp_upd->igd_render_standby = 1;
+
+	mem = &fsp_upd->memory_params;
+	mem->enable_memory_down = 1;
+	mem->dram_speed = 1;
+	mem->dimm_width = 1;
+	mem->dimm_density = 2;
+	mem->dimm_tcl = 0xb;
+	mem->dimm_trpt_rcd = 0xb;
+	mem->dimm_twr = 0xc;
+	mem->dimm_twtr = 6;
+	mem->dimm_trrd = 6;
+	mem->dimm_trtp = 6;
+	mem->dimm_tfaw = 0x14;
+}
--- a/arch/x86/cpu/baytrail/pci.c
+++ b/arch/x86/cpu/baytrail/pci.c
@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+#include <asm/fsp/fsp_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_pci_setup_hose(struct pci_controller *hose)
+{
+	hose->first_busno = 0;
+	hose->last_busno = 0;
+
+	/* PCI memory space */
+	pci_set_region(hose->regions + 0,
+		       CONFIG_PCI_MEM_BUS,
+		       CONFIG_PCI_MEM_PHYS,
+		       CONFIG_PCI_MEM_SIZE,
+		       PCI_REGION_MEM);
+
+	/* PCI IO space */
+	pci_set_region(hose->regions + 1,
+		       CONFIG_PCI_IO_BUS,
+		       CONFIG_PCI_IO_PHYS,
+		       CONFIG_PCI_IO_SIZE,
+		       PCI_REGION_IO);
+
+	pci_set_region(hose->regions + 2,
+		       CONFIG_PCI_PREF_BUS,
+		       CONFIG_PCI_PREF_PHYS,
+		       CONFIG_PCI_PREF_SIZE,
+		       PCI_REGION_PREFETCH);
+
+	pci_set_region(hose->regions + 3,
+		       0,
+		       0,
+		       gd->ram_size,
+		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+	hose->region_count = 4;
+}
--- a/arch/x86/cpu/baytrail/valleyview.c
+++ b/arch/x86/cpu/baytrail/valleyview.c
@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <pci_ids.h>
+#include <asm/post.h>
+
+static struct pci_device_id mmc_supported[] = {
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDIO },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDCARD },
+};
+
+int cpu_mmc_init(bd_t *bis)
+{
+	printf("mmc init\n");
+	return pci_mmc_init("ValleyView SDHCI", mmc_supported,
+			    ARRAY_SIZE(mmc_supported));
+}
+
+int arch_cpu_init(void)
+{
+	int ret;
+
+	post_code(POST_CPU_INIT);
+#ifdef CONFIG_SYS_X86_TSC_TIMER
+	timer_set_base(rdtsc());
+#endif
+
+	ret = x86_cpu_init_f();
+	if (ret)
+		return ret;
+
+	return 0;
+}
--- a/arch/x86/cpu/ivybridge/gma.c
+++ b/arch/x86/cpu/ivybridge/gma.c
@ -758,7 +758,8 @@ int gma_func0_init(pci_dev_t dev, struct pci_controller *hose,

 #ifdef CONFIG_VIDEO
 	start = get_timer(0);
-	ret = pci_run_vga_bios(dev, int15_handler, false);
+	ret = pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE |
+			       PCI_ROM_ALLOW_FALLBACK);
 	debug("BIOS ran in %lums\n", get_timer(start));
 #endif
 	/* Post VBIOS init */
--- a/arch/x86/cpu/ivybridge/sdram.c
+++ b/arch/x86/cpu/ivybridge/sdram.c
@ -757,7 +757,7 @@ int dram_init(void)
 		.mchbar = DEFAULT_MCHBAR,
 		.dmibar = DEFAULT_DMIBAR,
 		.epbar = DEFAULT_EPBAR,
-		.pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
+		.pciexbar = CONFIG_PCIE_ECAM_BASE,
 		.smbusbar = SMBUS_IO_BASE,
 		.wdbbar = 0x4000000,
 		.wdbsize = 0x1000,
--- a/arch/x86/cpu/quark/Kconfig
+++ b/arch/x86/cpu/quark/Kconfig
@ -0,0 +1,126 @@
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+config INTEL_QUARK
+	bool
+	select HAVE_RMU
+	select TSC_CALIBRATION_BYPASS
+
+if INTEL_QUARK
+
+config HAVE_RMU
+	bool "Add a Remote Management Unit (RMU) binary"
+	help
+	  Select this option to add a Remote Management Unit (RMU) binary
+	  to the resulting U-Boot image. It is a data block (up to 64K) of
+	  machine-specific code which must be put in the flash for the RMU
+	  within the Quark SoC processor to access when powered up before
+	  system BIOS is executed.
+
+config RMU_FILE
+	string "Remote Management Unit (RMU) binary filename"
+	depends on HAVE_RMU
+	default "rmu.bin"
+	help
+	  The filename of the file to use as Remote Management Unit (RMU)
+	  binary in the board directory.
+
+config RMU_ADDR
+	hex "Remote Management Unit (RMU) binary location"
+	depends on HAVE_RMU
+	default 0xfff00000
+	help
+	  The location of the RMU binary is determined by a strap. It must be
+	  put in flash at a location matching the strap-determined base address.
+
+	  The default base address of 0xfff00000 indicates that the binary must
+	  be located at offset 0 from the beginning of a 1MB flash device.
+
+config HAVE_CMC
+	bool
+	default HAVE_RMU
+
+config CMC_FILE
+	string
+	depends on HAVE_CMC
+	default RMU_FILE
+
+config CMC_ADDR
+	hex
+	depends on HAVE_CMC
+	default RMU_ADDR
+
+config ESRAM_BASE
+	hex
+	default 0x80000000
+	help
+	  Embedded SRAM (eSRAM) memory-mapped base address.
+
+config PCIE_ECAM_BASE
+	hex
+	default 0xe0000000
+
+config RCBA_BASE
+	hex
+	default 0xfed1c000
+	help
+	  Root Complex register block memory-mapped base address.
+
+config ACPI_PM1_BASE
+	hex
+	default 0x1000
+	help
+	  ACPI Power Managment 1 (PM1) i/o-mapped base address.
+	  This device is defined in ACPI specification, with 16 bytes in size.
+
+config ACPI_PBLK_BASE
+	hex
+	default 0x1010
+	help
+	  ACPI Processor Block (PBLK) i/o-mapped base address.
+	  This device is defined in ACPI specification, with 16 bytes in size.
+
+config SPI_DMA_BASE
+	hex
+	default 0x1020
+	help
+	  SPI DMA i/o-mapped base address.
+
+config GPIO_BASE
+	hex
+	default 0x1080
+	help
+	  GPIO i/o-mapped base address.
+
+config ACPI_GPE0_BASE
+	hex
+	default 0x1100
+	help
+	  ACPI General Purpose Event 0 (GPE0) i/o-mapped base address.
+	  This device is defined in ACPI specification, with 64 bytes in size.
+
+config WDT_BASE
+	hex
+	default 0x1140
+	help
+	  Watchdog timer i/o-mapped base address.
+
+config SYS_CAR_ADDR
+	hex
+	default ESRAM_BASE
+
+config SYS_CAR_SIZE
+	hex
+	default 0x8000
+	help
+	  Space in bytes in eSRAM used as Cache-As-ARM (CAR).
+	  Note this size must not exceed eSRAM's total size.
+
+config TSC_FREQ_IN_MHZ
+	int
+	default 400
+
+endif
--- a/arch/x86/cpu/quark/Makefile
+++ b/arch/x86/cpu/quark/Makefile
@ -0,0 +1,9 @@
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += car.o dram.o msg_port.o quark.o
+obj-y += mrc.o mrc_util.o hte.o smc.o
+obj-$(CONFIG_PCI) += pci.o
--- a/arch/x86/cpu/quark/car.S
+++ b/arch/x86/cpu/quark/car.S
@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/pci.h>
+#include <asm/post.h>
+#include <asm/arch/quark.h>
+#include <asm/arch/msg_port.h>
+
+.globl car_init
+car_init:
+	post_code(POST_CAR_START)
+
+	/*
+	 * Quark SoC contains an embedded 512KiB SRAM (eSRAM) that is
+	 * initialized by hardware. eSRAM is the ideal place to be used
+	 * for Cache-As-RAM (CAR) before system memory is available.
+	 *
+	 * Relocate this eSRAM to a suitable location in the physical
+	 * memory map and enable it.
+	 */
+
+	/* Host Memory Bound Register P03h:R08h */
+	mov	$((MSG_PORT_HOST_BRIDGE << 16) | (HM_BOUND << 8)), %eax
+	mov	$(DRAM_BASE + DRAM_MAX_SIZE + ESRAM_SIZE), %edx
+	lea	1f, %esp
+	jmp	msg_port_write
+1:
+
+	/* eSRAM Block Page Control Register P05h:R82h */
+	mov	$((MSG_PORT_MEM_MGR << 16) | (ESRAM_BLK_CTRL << 8)), %eax
+	mov	$(ESRAM_BLOCK_MODE | (CONFIG_ESRAM_BASE >> 24)), %edx
+	lea	2f, %esp
+	jmp	msg_port_write
+2:
+
+	post_code(POST_CAR_CPU_CACHE)
+	jmp	car_init_ret
+
+msg_port_read:
+	/*
+	 * Parameter:
+	 *   eax[23:16] - Message Port ID
+	 *   eax[15:08] - Register Address
+	 *
+	 * Return Value:
+	 *   eax - Message Port Register value
+	 *
+	 * Return Address: esp
+	 */
+
+	or	$((MSG_OP_READ << 24) | MSG_BYTE_ENABLE), %eax
+	mov	%eax, %ebx
+
+	/* Write MCR B0:D0:F0:RD0 */
+	mov	$(PCI_CFG_EN | MSG_CTRL_REG), %eax
+	mov	$PCI_REG_ADDR, %dx
+	out	%eax, %dx
+	mov	$PCI_REG_DATA, %dx
+	mov	%ebx, %eax
+	out	%eax, %dx
+
+	/* Read MDR B0:D0:F0:RD4 */
+	mov	$(PCI_CFG_EN | MSG_DATA_REG), %eax
+	mov	$PCI_REG_ADDR, %dx
+	out	%eax, %dx
+	mov	$PCI_REG_DATA, %dx
+	in	%dx, %eax
+
+	jmp	*%esp
+
+msg_port_write:
+	/*
+	 * Parameter:
+	 *   eax[23:16] - Message Port ID
+	 *   eax[15:08] - Register Address
+	 *   edx        - Message Port Register value to write
+	 *
+	 * Return Address: esp
+	 */
+
+	or	$((MSG_OP_WRITE << 24) | MSG_BYTE_ENABLE), %eax
+	mov	%eax, %esi
+	mov	%edx, %edi
+
+	/* Write MDR B0:D0:F0:RD4 */
+	mov	$(PCI_CFG_EN | MSG_DATA_REG), %eax
+	mov	$PCI_REG_ADDR, %dx
+	out	%eax, %dx
+	mov	$PCI_REG_DATA, %dx
+	mov	%edi, %eax
+	out	%eax, %dx
+
+	/* Write MCR B0:D0:F0:RD0 */
+	mov	$(PCI_CFG_EN | MSG_CTRL_REG), %eax
+	mov	$PCI_REG_ADDR, %dx
+	out	%eax, %dx
+	mov	$PCI_REG_DATA, %dx
+	mov	%esi, %eax
+	out	%eax, %dx
+
+	jmp	*%esp
--- a/arch/x86/cpu/quark/dram.c
+++ b/arch/x86/cpu/quark/dram.c
@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/post.h>
+#include <asm/arch/mrc.h>
+#include <asm/arch/quark.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int mrc_configure_params(struct mrc_params *mrc_params)
+{
+	const void *blob = gd->fdt_blob;
+	int node;
+	int mrc_flags;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_QRK_MRC);
+	if (node < 0) {
+		debug("%s: Cannot find MRC node\n", __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * TODO:
+	 *
+	 * We need support fast boot (MRC cache) in the future.
+	 *
+	 * Set boot mode to cold boot for now
+	 */
+	mrc_params->boot_mode = BM_COLD;
+
+	/*
+	 * TODO:
+	 *
+	 * We need determine ECC by pin strap state
+	 *
+	 * Disable ECC by default for now
+	 */
+	mrc_params->ecc_enables = 0;
+
+	mrc_flags = fdtdec_get_int(blob, node, "flags", 0);
+	if (mrc_flags & MRC_FLAG_SCRAMBLE_EN)
+		mrc_params->scrambling_enables = 1;
+	else
+		mrc_params->scrambling_enables = 0;
+
+	mrc_params->dram_width = fdtdec_get_int(blob, node, "dram-width", 0);
+	mrc_params->ddr_speed = fdtdec_get_int(blob, node, "dram-speed", 0);
+	mrc_params->ddr_type = fdtdec_get_int(blob, node, "dram-type", 0);
+
+	mrc_params->rank_enables = fdtdec_get_int(blob, node, "rank-mask", 0);
+	mrc_params->channel_enables = fdtdec_get_int(blob, node,
+		"chan-mask", 0);
+	mrc_params->channel_width = fdtdec_get_int(blob, node,
+		"chan-width", 0);
+	mrc_params->address_mode = fdtdec_get_int(blob, node, "addr-mode", 0);
+
+	mrc_params->refresh_rate = fdtdec_get_int(blob, node,
+		"refresh-rate", 0);
+	mrc_params->sr_temp_range = fdtdec_get_int(blob, node,
+		"sr-temp-range", 0);
+	mrc_params->ron_value = fdtdec_get_int(blob, node,
+		"ron-value", 0);
+	mrc_params->rtt_nom_value = fdtdec_get_int(blob, node,
+		"rtt-nom-value", 0);
+	mrc_params->rd_odt_value = fdtdec_get_int(blob, node,
+		"rd-odt-value", 0);
+
+	mrc_params->params.density = fdtdec_get_int(blob, node,
+		"dram-density", 0);
+	mrc_params->params.cl = fdtdec_get_int(blob, node, "dram-cl", 0);
+	mrc_params->params.ras = fdtdec_get_int(blob, node, "dram-ras", 0);
+	mrc_params->params.wtr = fdtdec_get_int(blob, node, "dram-wtr", 0);
+	mrc_params->params.rrd = fdtdec_get_int(blob, node, "dram-rrd", 0);
+	mrc_params->params.faw = fdtdec_get_int(blob, node, "dram-faw", 0);
+
+	debug("MRC dram_width %d\n", mrc_params->dram_width);
+	debug("MRC rank_enables %d\n", mrc_params->rank_enables);
+	debug("MRC ddr_speed %d\n", mrc_params->ddr_speed);
+	debug("MRC flags: %s\n",
+	      (mrc_params->scrambling_enables) ? "SCRAMBLE_EN" : "");
+
+	debug("MRC density=%d tCL=%d tRAS=%d tWTR=%d tRRD=%d tFAW=%d\n",
+	      mrc_params->params.density, mrc_params->params.cl,
+	      mrc_params->params.ras, mrc_params->params.wtr,
+	      mrc_params->params.rrd, mrc_params->params.faw);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	struct mrc_params mrc_params;
+	int ret;
+
+	memset(&mrc_params, 0, sizeof(struct mrc_params));
+	ret = mrc_configure_params(&mrc_params);
+	if (ret)
+		return ret;
+
+	/* Set up the DRAM by calling the memory reference code */
+	mrc_init(&mrc_params);
+	if (mrc_params.status)
+		return -EIO;
+
+	gd->ram_size = mrc_params.mem_size;
+	post_code(POST_DRAM);
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = 0;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
+ * It overrides the default implementation found elsewhere which simply
+ * picks the end of ram, wherever that may be. The location of the stack,
+ * the relocation address, and how far U-Boot is moved by relocation are
+ * set in the global data structure.
+ */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	return gd->ram_size;
+}
--- a/arch/x86/cpu/quark/hte.c
+++ b/arch/x86/cpu/quark/hte.c
@ -0,0 +1,396 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#include <common.h>
+#include <asm/arch/mrc.h>
+#include <asm/arch/msg_port.h>
+#include "mrc_util.h"
+#include "hte.h"
+
+/**
+ * Enable HTE to detect all possible errors for the given training parameters
+ * (per-bit or full byte lane).
+ */
+static void hte_enable_all_errors(void)
+{
+	msg_port_write(HTE, 0x000200A2, 0xFFFFFFFF);
+	msg_port_write(HTE, 0x000200A3, 0x000000FF);
+	msg_port_write(HTE, 0x000200A4, 0x00000000);
+}
+
+/**
+ * Go and read the HTE register in order to find any error
+ *
+ * @return: The errors detected in the HTE status register
+ */
+static u32 hte_check_errors(void)
+{
+	return msg_port_read(HTE, 0x000200A7);
+}
+
+/**
+ * Wait until HTE finishes
+ */
+static void hte_wait_for_complete(void)
+{
+	u32 tmp;
+
+	ENTERFN();
+
+	do {} while ((msg_port_read(HTE, 0x00020012) & BIT30) != 0);
+
+	tmp = msg_port_read(HTE, 0x00020011);
+	tmp |= BIT9;
+	tmp &= ~(BIT12 | BIT13);
+	msg_port_write(HTE, 0x00020011, tmp);
+
+	LEAVEFN();
+}
+
+/**
+ * Clear registers related with errors in the HTE
+ */
+static void hte_clear_error_regs(void)
+{
+	u32 tmp;
+
+	/*
+	 * Clear all HTE errors and enable error checking
+	 * for burst and chunk.
+	 */
+	tmp = msg_port_read(HTE, 0x000200A1);
+	tmp |= BIT8;
+	msg_port_write(HTE, 0x000200A1, tmp);
+}
+
+/**
+ * Execute a basic single-cache-line memory write/read/verify test using simple
+ * constant pattern, different for READ_TRAIN and WRITE_TRAIN modes.
+ *
+ * See hte_basic_write_read() which is the external visible wrapper.
+ *
+ * @mrc_params: host structure for all MRC global data
+ * @addr: memory adress being tested (must hit specific channel/rank)
+ * @first_run: if set then the HTE registers are configured, otherwise it is
+ *             assumed configuration is done and we just re-run the test
+ * @mode: READ_TRAIN or WRITE_TRAIN (the difference is in the pattern)
+ *
+ * @return: byte lane failure on each bit (for Quark only bit0 and bit1)
+ */
+static u16 hte_basic_data_cmp(struct mrc_params *mrc_params, u32 addr,
+			      u8 first_run, u8 mode)
+{
+	u32 pattern;
+	u32 offset;
+
+	if (first_run) {
+		msg_port_write(HTE, 0x00020020, 0x01B10021);
+		msg_port_write(HTE, 0x00020021, 0x06000000);
+		msg_port_write(HTE, 0x00020022, addr >> 6);
+		msg_port_write(HTE, 0x00020062, 0x00800015);
+		msg_port_write(HTE, 0x00020063, 0xAAAAAAAA);
+		msg_port_write(HTE, 0x00020064, 0xCCCCCCCC);
+		msg_port_write(HTE, 0x00020065, 0xF0F0F0F0);
+		msg_port_write(HTE, 0x00020061, 0x00030008);
+
+		if (mode == WRITE_TRAIN)
+			pattern = 0xC33C0000;
+		else /* READ_TRAIN */
+			pattern = 0xAA5555AA;
+
+		for (offset = 0x80; offset <= 0x8F; offset++)
+			msg_port_write(HTE, offset, pattern);
+	}
+
+	msg_port_write(HTE, 0x000200A1, 0xFFFF1000);
+	msg_port_write(HTE, 0x00020011, 0x00011000);
+	msg_port_write(HTE, 0x00020011, 0x00011100);
+
+	hte_wait_for_complete();
+
+	/*
+	 * Return bits 15:8 of HTE_CH0_ERR_XSTAT to check for
+	 * any bytelane errors.
+	 */
+	return (hte_check_errors() >> 8) & 0xFF;
+}
+
+/**
+ * Examine a single-cache-line memory with write/read/verify test using multiple
+ * data patterns (victim-aggressor algorithm).
+ *
+ * See hte_write_stress_bit_lanes() which is the external visible wrapper.
+ *
+ * @mrc_params: host structure for all MRC global data
+ * @addr: memory adress being tested (must hit specific channel/rank)
+ * @loop_cnt: number of test iterations
+ * @seed_victim: victim data pattern seed
+ * @seed_aggressor: aggressor data pattern seed
+ * @victim_bit: should be 0 as auto-rotate feature is in use
+ * @first_run: if set then the HTE registers are configured, otherwise it is
+ *             assumed configuration is done and we just re-run the test
+ *
+ * @return: byte lane failure on each bit (for Quark only bit0 and bit1)
+ */
+static u16 hte_rw_data_cmp(struct mrc_params *mrc_params, u32 addr,
+			   u8 loop_cnt, u32 seed_victim, u32 seed_aggressor,
+			   u8 victim_bit, u8 first_run)
+{
+	u32 offset;
+	u32 tmp;
+
+	if (first_run) {
+		msg_port_write(HTE, 0x00020020, 0x00910024);
+		msg_port_write(HTE, 0x00020023, 0x00810024);
+		msg_port_write(HTE, 0x00020021, 0x06070000);
+		msg_port_write(HTE, 0x00020024, 0x06070000);
+		msg_port_write(HTE, 0x00020022, addr >> 6);
+		msg_port_write(HTE, 0x00020025, addr >> 6);
+		msg_port_write(HTE, 0x00020062, 0x0000002A);
+		msg_port_write(HTE, 0x00020063, seed_victim);
+		msg_port_write(HTE, 0x00020064, seed_aggressor);
+		msg_port_write(HTE, 0x00020065, seed_victim);
+
+		/*
+		 * Write the pattern buffers to select the victim bit
+		 *
+		 * Start with bit0
+		 */
+		for (offset = 0x80; offset <= 0x8F; offset++) {
+			if ((offset % 8) == victim_bit)
+				msg_port_write(HTE, offset, 0x55555555);
+			else
+				msg_port_write(HTE, offset, 0xCCCCCCCC);
+		}
+
+		msg_port_write(HTE, 0x00020061, 0x00000000);
+		msg_port_write(HTE, 0x00020066, 0x03440000);
+		msg_port_write(HTE, 0x000200A1, 0xFFFF1000);
+	}
+
+	tmp = 0x10001000 | (loop_cnt << 16);
+	msg_port_write(HTE, 0x00020011, tmp);
+	msg_port_write(HTE, 0x00020011, tmp | BIT8);
+
+	hte_wait_for_complete();
+
+	/*
+	 * Return bits 15:8 of HTE_CH0_ERR_XSTAT to check for
+	 * any bytelane errors.
+	 */
+	return (hte_check_errors() >> 8) & 0xFF;
+}
+
+/**
+ * Use HW HTE engine to initialize or test all memory attached to a given DUNIT.
+ * If flag is MRC_MEM_INIT, this routine writes 0s to all memory locations to
+ * initialize ECC. If flag is MRC_MEM_TEST, this routine will send an 5AA55AA5
+ * pattern to all memory locations on the RankMask and then read it back.
+ * Then it sends an A55AA55A pattern to all memory locations on the RankMask
+ * and reads it back.
+ *
+ * @mrc_params: host structure for all MRC global data
+ * @flag: MRC_MEM_INIT or MRC_MEM_TEST
+ *
+ * @return: errors register showing HTE failures. Also prints out which rank
+ *          failed the HTE test if failure occurs. For rank detection to work,
+ *          the address map must be left in its default state. If MRC changes
+ *          the address map, this function must be modified to change it back
+ *          to default at the beginning, then restore it at the end.
+ */
+u32 hte_mem_init(struct mrc_params *mrc_params, u8 flag)
+{
+	u32 offset;
+	int test_num;
+	int i;
+
+	/*
+	 * Clear out the error registers at the start of each memory
+	 * init or memory test run.
+	 */
+	hte_clear_error_regs();
+
+	msg_port_write(HTE, 0x00020062, 0x00000015);
+
+	for (offset = 0x80; offset <= 0x8F; offset++)
+		msg_port_write(HTE, offset, ((offset & 1) ? 0xA55A : 0x5AA5));
+
+	msg_port_write(HTE, 0x00020021, 0x00000000);
+	msg_port_write(HTE, 0x00020022, (mrc_params->mem_size >> 6) - 1);
+	msg_port_write(HTE, 0x00020063, 0xAAAAAAAA);
+	msg_port_write(HTE, 0x00020064, 0xCCCCCCCC);
+	msg_port_write(HTE, 0x00020065, 0xF0F0F0F0);
+	msg_port_write(HTE, 0x00020066, 0x03000000);
+
+	switch (flag) {
+	case MRC_MEM_INIT:
+		/*
+		 * Only 1 write pass through memory is needed
+		 * to initialize ECC
+		 */
+		test_num = 1;
+		break;
+	case MRC_MEM_TEST:
+		/* Write/read then write/read with inverted pattern */
+		test_num = 4;
+		break;
+	default:
+		DPF(D_INFO, "Unknown parameter for flag: %d\n", flag);
+		return 0xFFFFFFFF;
+	}
+
+	DPF(D_INFO, "hte_mem_init");
+
+	for (i = 0; i < test_num; i++) {
+		DPF(D_INFO, ".");
+
+		if (i == 0) {
+			msg_port_write(HTE, 0x00020061, 0x00000000);
+			msg_port_write(HTE, 0x00020020, 0x00110010);
+		} else if (i == 1) {
+			msg_port_write(HTE, 0x00020061, 0x00000000);
+			msg_port_write(HTE, 0x00020020, 0x00010010);
+		} else if (i == 2) {
+			msg_port_write(HTE, 0x00020061, 0x00010100);
+			msg_port_write(HTE, 0x00020020, 0x00110010);
+		} else {
+			msg_port_write(HTE, 0x00020061, 0x00010100);
+			msg_port_write(HTE, 0x00020020, 0x00010010);
+		}
+
+		msg_port_write(HTE, 0x00020011, 0x00111000);
+		msg_port_write(HTE, 0x00020011, 0x00111100);
+
+		hte_wait_for_complete();
+
+		/* If this is a READ pass, check for errors at the end */
+		if ((i % 2) == 1) {
+			/* Return immediately if error */
+			if (hte_check_errors())
+				break;
+		}
+	}
+
+	DPF(D_INFO, "done\n");
+
+	return hte_check_errors();
+}
+
+/**
+ * Execute a basic single-cache-line memory write/read/verify test using simple
+ * constant pattern, different for READ_TRAIN and WRITE_TRAIN modes.
+ *
+ * @mrc_params: host structure for all MRC global data
+ * @addr: memory adress being tested (must hit specific channel/rank)
+ * @first_run: if set then the HTE registers are configured, otherwise it is
+ *             assumed configuration is done and we just re-run the test
+ * @mode: READ_TRAIN or WRITE_TRAIN (the difference is in the pattern)
+ *
+ * @return: byte lane failure on each bit (for Quark only bit0 and bit1)
+ */
+u16 hte_basic_write_read(struct mrc_params *mrc_params, u32 addr,
+			 u8 first_run, u8 mode)
+{
+	u16 errors;
+
+	ENTERFN();
+
+	/* Enable all error reporting in preparation for HTE test */
+	hte_enable_all_errors();
+	hte_clear_error_regs();
+
+	errors = hte_basic_data_cmp(mrc_params, addr, first_run, mode);
+
+	LEAVEFN();
+
+	return errors;
+}
+
+/**
+ * Examine a single-cache-line memory with write/read/verify test using multiple
+ * data patterns (victim-aggressor algorithm).
+ *
+ * @mrc_params: host structure for all MRC global data
+ * @addr: memory adress being tested (must hit specific channel/rank)
+ * @first_run: if set then the HTE registers are configured, otherwise it is
+ *             assumed configuration is done and we just re-run the test
+ *
+ * @return: byte lane failure on each bit (for Quark only bit0 and bit1)
+ */
+u16 hte_write_stress_bit_lanes(struct mrc_params *mrc_params,
+			       u32 addr, u8 first_run)
+{
+	u16 errors;
+	u8 victim_bit = 0;
+
+	ENTERFN();
+
+	/* Enable all error reporting in preparation for HTE test */
+	hte_enable_all_errors();
+	hte_clear_error_regs();
+
+	/*
+	 * Loop through each bit in the bytelane.
+	 *
+	 * Each pass creates a victim bit while keeping all other bits the same
+	 * as aggressors. AVN HTE adds an auto-rotate feature which allows us
+	 * to program the entire victim/aggressor sequence in 1 step.
+	 *
+	 * The victim bit rotates on each pass so no need to have software
+	 * implement a victim bit loop like on VLV.
+	 */
+	errors = hte_rw_data_cmp(mrc_params, addr, HTE_LOOP_CNT,
+				 HTE_LFSR_VICTIM_SEED, HTE_LFSR_AGRESSOR_SEED,
+				 victim_bit, first_run);
+
+	LEAVEFN();
+
+	return errors;
+}
+
+/**
+ * Execute a basic single-cache-line memory write or read.
+ * This is just for receive enable / fine write-levelling purpose.
+ *
+ * @addr: memory adress being tested (must hit specific channel/rank)
+ * @first_run: if set then the HTE registers are configured, otherwise it is
+ *             assumed configuration is done and we just re-run the test
+ * @is_write: when non-zero memory write operation executed, otherwise read
+ */
+void hte_mem_op(u32 addr, u8 first_run, u8 is_write)
+{
+	u32 offset;
+	u32 tmp;
+
+	hte_enable_all_errors();
+	hte_clear_error_regs();
+
+	if (first_run) {
+		tmp = is_write ? 0x01110021 : 0x01010021;
+		msg_port_write(HTE, 0x00020020, tmp);
+
+		msg_port_write(HTE, 0x00020021, 0x06000000);
+		msg_port_write(HTE, 0x00020022, addr >> 6);
+		msg_port_write(HTE, 0x00020062, 0x00800015);
+		msg_port_write(HTE, 0x00020063, 0xAAAAAAAA);
+		msg_port_write(HTE, 0x00020064, 0xCCCCCCCC);
+		msg_port_write(HTE, 0x00020065, 0xF0F0F0F0);
+		msg_port_write(HTE, 0x00020061, 0x00030008);
+
+		for (offset = 0x80; offset <= 0x8F; offset++)
+			msg_port_write(HTE, offset, 0xC33C0000);
+	}
+
+	msg_port_write(HTE, 0x000200A1, 0xFFFF1000);
+	msg_port_write(HTE, 0x00020011, 0x00011000);
+	msg_port_write(HTE, 0x00020011, 0x00011100);
+
+	hte_wait_for_complete();
+}
--- a/arch/x86/cpu/quark/hte.h
+++ b/arch/x86/cpu/quark/hte.h
@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#ifndef _HTE_H_
+#define _HTE_H_
+
+enum {
+	MRC_MEM_INIT,
+	MRC_MEM_TEST
+};
+
+enum {
+	READ_TRAIN,
+	WRITE_TRAIN
+};
+
+/*
+ * EXP_LOOP_CNT field of HTE_CMD_CTL
+ *
+ * This CANNOT be less than 4!
+ */
+#define HTE_LOOP_CNT		5
+
+/* random seed for victim */
+#define HTE_LFSR_VICTIM_SEED	0xF294BA21
+
+/* random seed for aggressor */
+#define HTE_LFSR_AGRESSOR_SEED	0xEBA7492D
+
+u32 hte_mem_init(struct mrc_params *mrc_params, u8 flag);
+u16 hte_basic_write_read(struct mrc_params *mrc_params, u32 addr,
+			 u8 first_run, u8 mode);
+u16 hte_write_stress_bit_lanes(struct mrc_params *mrc_params,
+			       u32 addr, u8 first_run);
+void hte_mem_op(u32 addr, u8 first_run, u8 is_write);
+
+#endif /* _HTE_H_ */
--- a/arch/x86/cpu/quark/mrc.c
+++ b/arch/x86/cpu/quark/mrc.c
@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+/*
+ * This is the main Quark Memory Reference Code (MRC)
+ *
+ * These functions are generic and should work for any Quark-based board.
+ *
+ * MRC requires two data structures to be passed in which are initialized by
+ * mrc_adjust_params().
+ *
+ * The basic flow is as follows:
+ * 01) Check for supported DDR speed configuration
+ * 02) Set up Memory Manager buffer as pass-through (POR)
+ * 03) Set Channel Interleaving Mode and Channel Stride to the most aggressive
+ *     setting possible
+ * 04) Set up the Memory Controller logic
+ * 05) Set up the DDR_PHY logic
+ * 06) Initialise the DRAMs (JEDEC)
+ * 07) Perform the Receive Enable Calibration algorithm
+ * 08) Perform the Write Leveling algorithm
+ * 09) Perform the Read Training algorithm (includes internal Vref)
+ * 10) Perform the Write Training algorithm
+ * 11) Set Channel Interleaving Mode and Channel Stride to the desired settings
+ *
+ * DRAM unit configuration based on Valleyview MRC.
+ */
+
+#include <common.h>
+#include <asm/arch/mrc.h>
+#include <asm/arch/msg_port.h>
+#include "mrc_util.h"
+#include "smc.h"
+
+static const struct mem_init init[] = {
+	{ 0x0101, BM_COLD | BM_FAST | BM_WARM | BM_S3, clear_self_refresh       },
+	{ 0x0200, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_ddr_timing_control  },
+	{ 0x0103, BM_COLD | BM_FAST                  , prog_decode_before_jedec },
+	{ 0x0104, BM_COLD | BM_FAST                  , perform_ddr_reset        },
+	{ 0x0300, BM_COLD | BM_FAST           | BM_S3, ddrphy_init              },
+	{ 0x0400, BM_COLD | BM_FAST                  , perform_jedec_init       },
+	{ 0x0105, BM_COLD | BM_FAST                  , set_ddr_init_complete    },
+	{ 0x0106,           BM_FAST | BM_WARM | BM_S3, restore_timings          },
+	{ 0x0106, BM_COLD                            , default_timings          },
+	{ 0x0500, BM_COLD                            , rcvn_cal                 },
+	{ 0x0600, BM_COLD                            , wr_level                 },
+	{ 0x0120, BM_COLD                            , prog_page_ctrl           },
+	{ 0x0700, BM_COLD                            , rd_train                 },
+	{ 0x0800, BM_COLD                            , wr_train                 },
+	{ 0x010b, BM_COLD                            , store_timings            },
+	{ 0x010c, BM_COLD | BM_FAST | BM_WARM | BM_S3, enable_scrambling        },
+	{ 0x010d, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_ddr_control         },
+	{ 0x010e, BM_COLD | BM_FAST | BM_WARM | BM_S3, prog_dra_drb             },
+	{ 0x010f,                     BM_WARM | BM_S3, perform_wake             },
+	{ 0x0110, BM_COLD | BM_FAST | BM_WARM | BM_S3, change_refresh_period    },
+	{ 0x0111, BM_COLD | BM_FAST | BM_WARM | BM_S3, set_auto_refresh         },
+	{ 0x0112, BM_COLD | BM_FAST | BM_WARM | BM_S3, ecc_enable               },
+	{ 0x0113, BM_COLD | BM_FAST                  , memory_test              },
+	{ 0x0114, BM_COLD | BM_FAST | BM_WARM | BM_S3, lock_registers           }
+};
+
+/* Adjust configuration parameters before initialization sequence */
+static void mrc_adjust_params(struct mrc_params *mrc_params)
+{
+	const struct dram_params *dram_params;
+	uint8_t dram_width;
+	uint32_t rank_enables;
+	uint32_t channel_width;
+
+	ENTERFN();
+
+	/* initially expect success */
+	mrc_params->status = MRC_SUCCESS;
+
+	dram_width = mrc_params->dram_width;
+	rank_enables = mrc_params->rank_enables;
+	channel_width = mrc_params->channel_width;
+
+	/*
+	 * Setup board layout (must be reviewed as is selecting static timings)
+	 * 0 == R0 (DDR3 x16), 1 == R1 (DDR3 x16),
+	 * 2 == DV (DDR3 x8), 3 == SV (DDR3 x8).
+	 */
+	if (dram_width == X8)
+		mrc_params->board_id = 2;	/* select x8 layout */
+	else
+		mrc_params->board_id = 0;	/* select x16 layout */
+
+	/* initially no memory */
+	mrc_params->mem_size = 0;
+
+	/* begin of channel settings */
+	dram_params = &mrc_params->params;
+
+	/*
+	 * Determine column bits:
+	 *
+	 * Column: 11 for 8Gbx8, else 10
+	 */
+	mrc_params->column_bits[0] =
+		((dram_params[0].density == 4) &&
+		(dram_width == X8)) ? (11) : (10);
+
+	/*
+	 * Determine row bits:
+	 *
+	 * 512Mbx16=12 512Mbx8=13
+	 * 1Gbx16=13   1Gbx8=14
+	 * 2Gbx16=14   2Gbx8=15
+	 * 4Gbx16=15   4Gbx8=16
+	 * 8Gbx16=16   8Gbx8=16
+	 */
+	mrc_params->row_bits[0] = 12 + (dram_params[0].density) +
+		(((dram_params[0].density < 4) &&
+		(dram_width == X8)) ? (1) : (0));
+
+	/*
+	 * Determine per-channel memory size:
+	 *
+	 * (For 2 RANKs, multiply by 2)
+	 * (For 16 bit data bus, divide by 2)
+	 *
+	 * DENSITY WIDTH MEM_AVAILABLE
+	 * 512Mb   x16   0x008000000 ( 128MB)
+	 * 512Mb   x8    0x010000000 ( 256MB)
+	 * 1Gb     x16   0x010000000 ( 256MB)
+	 * 1Gb     x8    0x020000000 ( 512MB)
+	 * 2Gb     x16   0x020000000 ( 512MB)
+	 * 2Gb     x8    0x040000000 (1024MB)
+	 * 4Gb     x16   0x040000000 (1024MB)
+	 * 4Gb     x8    0x080000000 (2048MB)
+	 */
+	mrc_params->channel_size[0] = (1 << dram_params[0].density);
+	mrc_params->channel_size[0] *= (dram_width == X8) ? 2 : 1;
+	mrc_params->channel_size[0] *= (rank_enables == 0x3) ? 2 : 1;
+	mrc_params->channel_size[0] *= (channel_width == X16) ? 1 : 2;
+
+	/* Determine memory size (convert number of 64MB/512Mb units) */
+	mrc_params->mem_size += mrc_params->channel_size[0] << 26;
+
+	LEAVEFN();
+}
+
+static void mrc_mem_init(struct mrc_params *mrc_params)
+{
+	int i;
+
+	ENTERFN();
+
+	/* MRC started */
+	mrc_post_code(0x01, 0x00);
+
+	if (mrc_params->boot_mode != BM_COLD) {
+		if (mrc_params->ddr_speed != mrc_params->timings.ddr_speed) {
+			/* full training required as frequency changed */
+			mrc_params->boot_mode = BM_COLD;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(init); i++) {
+		uint64_t my_tsc;
+
+		if (mrc_params->boot_mode & init[i].boot_path) {
+			uint8_t major = init[i].post_code >> 8 & 0xff;
+			uint8_t minor = init[i].post_code >> 0 & 0xff;
+			mrc_post_code(major, minor);
+
+			my_tsc = rdtsc();
+			init[i].init_fn(mrc_params);
+			DPF(D_TIME, "Execution time %llx", rdtsc() - my_tsc);
+		}
+	}
+
+	/* display the timings */
+	print_timings(mrc_params);
+
+	/* MRC complete */
+	mrc_post_code(0x01, 0xff);
+
+	LEAVEFN();
+}
+
+void mrc_init(struct mrc_params *mrc_params)
+{
+	ENTERFN();
+
+	DPF(D_INFO, "MRC Version %04x %s %s\n", MRC_VERSION,
+	    __DATE__, __TIME__);
+
+	/* Set up the data structures used by mrc_mem_init() */
+	mrc_adjust_params(mrc_params);
+
+	/* Initialize system memory */
+	mrc_mem_init(mrc_params);
+
+	LEAVEFN();
+}
--- a/arch/x86/cpu/quark/mrc_util.c
+++ b/arch/x86/cpu/quark/mrc_util.c
--- a/arch/x86/cpu/quark/mrc_util.h
+++ b/arch/x86/cpu/quark/mrc_util.h
@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#ifndef _MRC_UTIL_H_
+#define _MRC_UTIL_H_
+
+/* Turn on this macro to enable MRC debugging output */
+#undef  MRC_DEBUG
+
+/* MRC Debug Support */
+#define DPF		debug_cond
+
+/* debug print type */
+
+#ifdef MRC_DEBUG
+#define D_ERROR		0x0001
+#define D_INFO		0x0002
+#define D_REGRD		0x0004
+#define D_REGWR		0x0008
+#define D_FCALL		0x0010
+#define D_TRN		0x0020
+#define D_TIME		0x0040
+#else
+#define D_ERROR		0
+#define D_INFO		0
+#define D_REGRD		0
+#define D_REGWR		0
+#define D_FCALL		0
+#define D_TRN		0
+#define D_TIME		0
+#endif
+
+#define ENTERFN(...)	debug_cond(D_FCALL, "<%s>\n", __func__)
+#define LEAVEFN(...)	debug_cond(D_FCALL, "</%s>\n", __func__)
+#define REPORTFN(...)	debug_cond(D_FCALL, "<%s/>\n", __func__)
+
+/* Generic Register Bits */
+#define BIT0		0x00000001
+#define BIT1		0x00000002
+#define BIT2		0x00000004
+#define BIT3		0x00000008
+#define BIT4		0x00000010
+#define BIT5		0x00000020
+#define BIT6		0x00000040
+#define BIT7		0x00000080
+#define BIT8		0x00000100
+#define BIT9		0x00000200
+#define BIT10		0x00000400
+#define BIT11		0x00000800
+#define BIT12		0x00001000
+#define BIT13		0x00002000
+#define BIT14		0x00004000
+#define BIT15		0x00008000
+#define BIT16		0x00010000
+#define BIT17		0x00020000
+#define BIT18		0x00040000
+#define BIT19		0x00080000
+#define BIT20		0x00100000
+#define BIT21		0x00200000
+#define BIT22		0x00400000
+#define BIT23		0x00800000
+#define BIT24		0x01000000
+#define BIT25		0x02000000
+#define BIT26		0x04000000
+#define BIT27		0x08000000
+#define BIT28		0x10000000
+#define BIT29		0x20000000
+#define BIT30		0x40000000
+#define BIT31		0x80000000
+
+/* Message Bus Port */
+#define MEM_CTLR	0x01
+#define HOST_BRIDGE	0x03
+#define MEM_MGR		0x05
+#define HTE		0x11
+#define DDRPHY		0x12
+
+/* number of sample points */
+#define SAMPLE_CNT	3
+/* number of PIs to increment per sample */
+#define SAMPLE_DLY	26
+
+enum {
+	/* indicates to decrease delays when looking for edge */
+	BACKWARD,
+	/* indicates to increase delays when looking for edge */
+	FORWARD
+};
+
+enum {
+	RCVN,
+	WDQS,
+	WDQX,
+	RDQS,
+	VREF,
+	WCMD,
+	WCTL,
+	WCLK,
+	MAX_ALGOS,
+};
+
+void mrc_write_mask(u32 unit, u32 addr, u32 data, u32 mask);
+void mrc_alt_write_mask(u32 unit, u32 addr, u32 data, u32 mask);
+void mrc_post_code(uint8_t major, uint8_t minor);
+void delay_n(uint32_t ns);
+void delay_u(uint32_t ms);
+void select_mem_mgr(void);
+void select_hte(void);
+void dram_init_command(uint32_t data);
+void dram_wake_command(void);
+void training_message(uint8_t channel, uint8_t rank, uint8_t byte_lane);
+
+void set_rcvn(uint8_t channel, uint8_t rank,
+	      uint8_t byte_lane, uint32_t pi_count);
+uint32_t get_rcvn(uint8_t channel, uint8_t rank, uint8_t byte_lane);
+void set_rdqs(uint8_t channel, uint8_t rank,
+	      uint8_t byte_lane, uint32_t pi_count);
+uint32_t get_rdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane);
+void set_wdqs(uint8_t channel, uint8_t rank,
+	      uint8_t byte_lane, uint32_t pi_count);
+uint32_t get_wdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane);
+void set_wdq(uint8_t channel, uint8_t rank,
+	     uint8_t byte_lane, uint32_t pi_count);
+uint32_t get_wdq(uint8_t channel, uint8_t rank, uint8_t byte_lane);
+void set_wcmd(uint8_t channel, uint32_t pi_count);
+uint32_t get_wcmd(uint8_t channel);
+void set_wclk(uint8_t channel, uint8_t rank, uint32_t pi_count);
+uint32_t get_wclk(uint8_t channel, uint8_t rank);
+void set_wctl(uint8_t channel, uint8_t rank, uint32_t pi_count);
+uint32_t get_wctl(uint8_t channel, uint8_t rank);
+void set_vref(uint8_t channel, uint8_t byte_lane, uint32_t setting);
+uint32_t get_vref(uint8_t channel, uint8_t byte_lane);
+
+uint32_t get_addr(uint8_t channel, uint8_t rank);
+uint32_t sample_dqs(struct mrc_params *mrc_params, uint8_t channel,
+		    uint8_t rank, bool rcvn);
+void find_rising_edge(struct mrc_params *mrc_params, uint32_t delay[],
+		      uint8_t channel, uint8_t rank, bool rcvn);
+uint32_t byte_lane_mask(struct mrc_params *mrc_params);
+uint32_t check_rw_coarse(struct mrc_params *mrc_params, uint32_t address);
+uint32_t check_bls_ex(struct mrc_params *mrc_params, uint32_t address);
+void lfsr32(uint32_t *lfsr_ptr);
+void clear_pointers(void);
+void print_timings(struct mrc_params *mrc_params);
+
+#endif /* _MRC_UTIL_H_ */
--- a/arch/x86/cpu/quark/msg_port.c
+++ b/arch/x86/cpu/quark/msg_port.c
@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/arch/device.h>
+#include <asm/arch/msg_port.h>
+
+void msg_port_setup(int op, int port, int reg)
+{
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_REG,
+			       (((op) << 24) | ((port) << 16) |
+			       (((reg) << 8) & 0xff00) | MSG_BYTE_ENABLE));
+}
+
+u32 msg_port_read(u8 port, u32 reg)
+{
+	u32 value;
+
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_EXT_REG,
+			       reg & 0xffffff00);
+	msg_port_setup(MSG_OP_READ, port, reg);
+	pci_read_config_dword(QUARK_HOST_BRIDGE, MSG_DATA_REG, &value);
+
+	return value;
+}
+
+void msg_port_write(u8 port, u32 reg, u32 value)
+{
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_DATA_REG, value);
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_EXT_REG,
+			       reg & 0xffffff00);
+	msg_port_setup(MSG_OP_WRITE, port, reg);
+}
+
+u32 msg_port_alt_read(u8 port, u32 reg)
+{
+	u32 value;
+
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_EXT_REG,
+			       reg & 0xffffff00);
+	msg_port_setup(MSG_OP_ALT_READ, port, reg);
+	pci_read_config_dword(QUARK_HOST_BRIDGE, MSG_DATA_REG, &value);
+
+	return value;
+}
+
+void msg_port_alt_write(u8 port, u32 reg, u32 value)
+{
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_DATA_REG, value);
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_EXT_REG,
+			       reg & 0xffffff00);
+	msg_port_setup(MSG_OP_ALT_WRITE, port, reg);
+}
+
+u32 msg_port_io_read(u8 port, u32 reg)
+{
+	u32 value;
+
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_EXT_REG,
+			       reg & 0xffffff00);
+	msg_port_setup(MSG_OP_IO_READ, port, reg);
+	pci_read_config_dword(QUARK_HOST_BRIDGE, MSG_DATA_REG, &value);
+
+	return value;
+}
+
+void msg_port_io_write(u8 port, u32 reg, u32 value)
+{
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_DATA_REG, value);
+	pci_write_config_dword(QUARK_HOST_BRIDGE, MSG_CTRL_EXT_REG,
+			       reg & 0xffffff00);
+	msg_port_setup(MSG_OP_IO_WRITE, port, reg);
+}
--- a/arch/x86/cpu/quark/pci.c
+++ b/arch/x86/cpu/quark/pci.c
@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+#include <asm/arch/device.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_pci_setup_hose(struct pci_controller *hose)
+{
+	hose->first_busno = 0;
+	hose->last_busno = 0;
+
+	/* PCI memory space */
+	pci_set_region(hose->regions + 0,
+		       CONFIG_PCI_MEM_BUS,
+		       CONFIG_PCI_MEM_PHYS,
+		       CONFIG_PCI_MEM_SIZE,
+		       PCI_REGION_MEM);
+
+	/* PCI IO space */
+	pci_set_region(hose->regions + 1,
+		       CONFIG_PCI_IO_BUS,
+		       CONFIG_PCI_IO_PHYS,
+		       CONFIG_PCI_IO_SIZE,
+		       PCI_REGION_IO);
+
+	pci_set_region(hose->regions + 2,
+		       CONFIG_PCI_PREF_BUS,
+		       CONFIG_PCI_PREF_PHYS,
+		       CONFIG_PCI_PREF_SIZE,
+		       PCI_REGION_PREFETCH);
+
+	pci_set_region(hose->regions + 3,
+		       0,
+		       0,
+		       gd->ram_size,
+		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+	hose->region_count = 4;
+}
+
+int board_pci_post_scan(struct pci_controller *hose)
+{
+	return 0;
+}
+
+int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
+{
+	/*
+	 * TODO:
+	 *
+	 * For some unknown reason, the PCI enumeration process hangs
+	 * when it scans to the PCIe root port 0 (D23:F0) & 1 (D23:F1).
+	 *
+	 * For now we just skip these two devices, and this needs to
+	 * be revisited later.
+	 */
+	if (dev == QUARK_HOST_BRIDGE ||
+	    dev == QUARK_PCIE0 || dev == QUARK_PCIE1) {
+		return 1;
+	}
+
+	return 0;
+}
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/post.h>
+#include <asm/processor.h>
+#include <asm/arch/device.h>
+#include <asm/arch/msg_port.h>
+#include <asm/arch/quark.h>
+
+static struct pci_device_id mmc_supported[] = {
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_SDIO },
+};
+
+/*
+ * TODO:
+ *
+ * This whole routine should be removed until we fully convert the ICH SPI
+ * driver to DM and make use of DT to pass the bios control register offset
+ */
+static void unprotect_spi_flash(void)
+{
+	u32 bc;
+
+	bc = pci_read_config32(QUARK_LEGACY_BRIDGE, 0xd8);
+	bc |= 0x1;	/* unprotect the flash */
+	pci_write_config32(QUARK_LEGACY_BRIDGE, 0xd8, bc);
+}
+
+static void quark_setup_bars(void)
+{
+	/* GPIO - D31:F0:R44h */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA,
+			       CONFIG_GPIO_BASE | IO_BAR_EN);
+
+	/* ACPI PM1 Block - D31:F0:R48h */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK,
+			       CONFIG_ACPI_PM1_BASE | IO_BAR_EN);
+
+	/* GPE0 - D31:F0:R4Ch */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK,
+			       CONFIG_ACPI_GPE0_BASE | IO_BAR_EN);
+
+	/* WDT - D31:F0:R84h */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA,
+			       CONFIG_WDT_BASE | IO_BAR_EN);
+
+	/* RCBA - D31:F0:RF0h */
+	pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA,
+			       CONFIG_RCBA_BASE | MEM_BAR_EN);
+
+	/* ACPI P Block - Msg Port 04:R70h */
+	msg_port_write(MSG_PORT_RMU, PBLK_BA,
+		       CONFIG_ACPI_PBLK_BASE | IO_BAR_EN);
+
+	/* SPI DMA - Msg Port 04:R7Ah */
+	msg_port_write(MSG_PORT_RMU, SPI_DMA_BA,
+		       CONFIG_SPI_DMA_BASE | IO_BAR_EN);
+
+	/* PCIe ECAM */
+	msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL,
+		       CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
+	msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG,
+		       CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
+}
+
+int arch_cpu_init(void)
+{
+	struct pci_controller *hose;
+	int ret;
+
+	post_code(POST_CPU_INIT);
+#ifdef CONFIG_SYS_X86_TSC_TIMER
+	timer_set_base(rdtsc());
+#endif
+
+	ret = x86_cpu_init_f();
+	if (ret)
+		return ret;
+
+	ret = pci_early_init_hose(&hose);
+	if (ret)
+		return ret;
+
+	/*
+	 * Quark SoC has some non-standard BARs (excluding PCI standard BARs)
+	 * which need be initialized with suggested values
+	 */
+	quark_setup_bars();
+
+	unprotect_spi_flash();
+
+	return 0;
+}
+
+int print_cpuinfo(void)
+{
+	post_code(POST_CPU_INFO);
+	return default_print_cpuinfo();
+}
+
+void reset_cpu(ulong addr)
+{
+	/* cold reset */
+	outb(0x08, PORT_RESET);
+}
+
+int cpu_mmc_init(bd_t *bis)
+{
+	return pci_mmc_init("Quark SDHCI", mmc_supported,
+			    ARRAY_SIZE(mmc_supported));
+}
--- a/arch/x86/cpu/quark/smc.c
+++ b/arch/x86/cpu/quark/smc.c
--- a/arch/x86/cpu/quark/smc.h
+++ b/arch/x86/cpu/quark/smc.h
@ -0,0 +1,446 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#ifndef _SMC_H_
+#define _SMC_H_
+
+/* System Memory Controller Register Defines */
+
+/* Memory Controller Message Bus Registers Offsets */
+#define DRP			0x00
+#define DTR0			0x01
+#define DTR1			0x02
+#define DTR2			0x03
+#define DTR3			0x04
+#define DTR4			0x05
+#define DPMC0			0x06
+#define DPMC1			0x07
+#define DRFC			0x08
+#define DSCH			0x09
+#define DCAL			0x0A
+#define DRMC			0x0B
+#define PMSTS			0x0C
+#define DCO			0x0F
+#define DSTAT			0x20
+#define SSKPD0			0x4A
+#define SSKPD1			0x4B
+#define DECCCTRL		0x60
+#define DECCSTAT		0x61
+#define DECCSBECNT		0x62
+#define DECCSBECA		0x68
+#define DECCSBECS		0x69
+#define DECCDBECA		0x6A
+#define DECCDBECS		0x6B
+#define DFUSESTAT		0x70
+#define SCRMSEED		0x80
+#define SCRMLO			0x81
+#define SCRMHI			0x82
+
+/* DRAM init command */
+#define DCMD_MRS1(rnk, dat)	(0 | ((rnk) << 22) | (1 << 3) | ((dat) << 6))
+#define DCMD_REF(rnk)		(1 | ((rnk) << 22))
+#define DCMD_PRE(rnk)		(2 | ((rnk) << 22))
+#define DCMD_PREA(rnk)		(2 | ((rnk) << 22) | (BIT10 << 6))
+#define DCMD_ACT(rnk, row)	(3 | ((rnk) << 22) | ((row) << 6))
+#define DCMD_WR(rnk, col)	(4 | ((rnk) << 22) | ((col) << 6))
+#define DCMD_RD(rnk, col)	(5 | ((rnk) << 22) | ((col) << 6))
+#define DCMD_ZQCS(rnk)		(6 | ((rnk) << 22))
+#define DCMD_ZQCL(rnk)		(6 | ((rnk) << 22) | (BIT10 << 6))
+#define DCMD_NOP(rnk)		(7 | ((rnk) << 22))
+
+#define DDR3_EMRS1_DIC_40	(0)
+#define DDR3_EMRS1_DIC_34	(1)
+
+#define DDR3_EMRS1_RTTNOM_0	(0)
+#define DDR3_EMRS1_RTTNOM_60	(0x04)
+#define DDR3_EMRS1_RTTNOM_120	(0x40)
+#define DDR3_EMRS1_RTTNOM_40	(0x44)
+#define DDR3_EMRS1_RTTNOM_20	(0x200)
+#define DDR3_EMRS1_RTTNOM_30	(0x204)
+
+#define DDR3_EMRS2_RTTWR_60	(1 << 9)
+#define DDR3_EMRS2_RTTWR_120	(1 << 10)
+
+/* BEGIN DDRIO Registers */
+
+/* DDR IOs & COMPs */
+#define DDRIODQ_BL_OFFSET	0x0800
+#define DDRIODQ_CH_OFFSET	((NUM_BYTE_LANES / 2) * DDRIODQ_BL_OFFSET)
+#define DDRIOCCC_CH_OFFSET	0x0800
+#define DDRCOMP_CH_OFFSET	0x0100
+
+/* CH0-BL01-DQ */
+#define DQOBSCKEBBCTL		0x0000
+#define DQDLLTXCTL		0x0004
+#define DQDLLRXCTL		0x0008
+#define DQMDLLCTL		0x000C
+#define B0RXIOBUFCTL		0x0010
+#define B0VREFCTL		0x0014
+#define B0RXOFFSET1		0x0018
+#define B0RXOFFSET0		0x001C
+#define B1RXIOBUFCTL		0x0020
+#define B1VREFCTL		0x0024
+#define B1RXOFFSET1		0x0028
+#define B1RXOFFSET0		0x002C
+#define DQDFTCTL		0x0030
+#define DQTRAINSTS		0x0034
+#define B1DLLPICODER0		0x0038
+#define B0DLLPICODER0		0x003C
+#define B1DLLPICODER1		0x0040
+#define B0DLLPICODER1		0x0044
+#define B1DLLPICODER2		0x0048
+#define B0DLLPICODER2		0x004C
+#define B1DLLPICODER3		0x0050
+#define B0DLLPICODER3		0x0054
+#define B1RXDQSPICODE		0x0058
+#define B0RXDQSPICODE		0x005C
+#define B1RXDQPICODER32		0x0060
+#define B1RXDQPICODER10		0x0064
+#define B0RXDQPICODER32		0x0068
+#define B0RXDQPICODER10		0x006C
+#define B01PTRCTL0		0x0070
+#define B01PTRCTL1		0x0074
+#define B01DBCTL0		0x0078
+#define B01DBCTL1		0x007C
+#define B0LATCTL0		0x0080
+#define B1LATCTL0		0x0084
+#define B01LATCTL1		0x0088
+#define B0ONDURCTL		0x008C
+#define B1ONDURCTL		0x0090
+#define B0OVRCTL		0x0094
+#define B1OVRCTL		0x0098
+#define DQCTL			0x009C
+#define B0RK2RKCHGPTRCTRL	0x00A0
+#define B1RK2RKCHGPTRCTRL	0x00A4
+#define DQRK2RKCTL		0x00A8
+#define DQRK2RKPTRCTL		0x00AC
+#define B0RK2RKLAT		0x00B0
+#define B1RK2RKLAT		0x00B4
+#define DQCLKALIGNREG0		0x00B8
+#define DQCLKALIGNREG1		0x00BC
+#define DQCLKALIGNREG2		0x00C0
+#define DQCLKALIGNSTS0		0x00C4
+#define DQCLKALIGNSTS1		0x00C8
+#define DQCLKGATE		0x00CC
+#define B0COMPSLV1		0x00D0
+#define B1COMPSLV1		0x00D4
+#define B0COMPSLV2		0x00D8
+#define B1COMPSLV2		0x00DC
+#define B0COMPSLV3		0x00E0
+#define B1COMPSLV3		0x00E4
+#define DQVISALANECR0TOP	0x00E8
+#define DQVISALANECR1TOP	0x00EC
+#define DQVISACONTROLCRTOP	0x00F0
+#define DQVISALANECR0BL		0x00F4
+#define DQVISALANECR1BL		0x00F8
+#define DQVISACONTROLCRBL	0x00FC
+#define DQTIMINGCTRL		0x010C
+
+/* CH0-ECC */
+#define ECCDLLTXCTL		0x2004
+#define ECCDLLRXCTL		0x2008
+#define ECCMDLLCTL		0x200C
+#define ECCB1DLLPICODER0	0x2038
+#define ECCB1DLLPICODER1	0x2040
+#define ECCB1DLLPICODER2	0x2048
+#define ECCB1DLLPICODER3	0x2050
+#define ECCB01DBCTL0		0x2078
+#define ECCB01DBCTL1		0x207C
+#define ECCCLKALIGNREG0		0x20B8
+#define ECCCLKALIGNREG1		0x20BC
+#define ECCCLKALIGNREG2		0x20C0
+
+/* CH0-CMD */
+#define CMDOBSCKEBBCTL		0x4800
+#define CMDDLLTXCTL		0x4808
+#define CMDDLLRXCTL		0x480C
+#define CMDMDLLCTL		0x4810
+#define CMDRCOMPODT		0x4814
+#define CMDDLLPICODER0		0x4820
+#define CMDDLLPICODER1		0x4824
+#define CMDCFGREG0		0x4840
+#define CMDPTRREG		0x4844
+#define CMDCLKALIGNREG0		0x4850
+#define CMDCLKALIGNREG1		0x4854
+#define CMDCLKALIGNREG2		0x4858
+#define CMDPMCONFIG0		0x485C
+#define CMDPMDLYREG0		0x4860
+#define CMDPMDLYREG1		0x4864
+#define CMDPMDLYREG2		0x4868
+#define CMDPMDLYREG3		0x486C
+#define CMDPMDLYREG4		0x4870
+#define CMDCLKALIGNSTS0		0x4874
+#define CMDCLKALIGNSTS1		0x4878
+#define CMDPMSTS0		0x487C
+#define CMDPMSTS1		0x4880
+#define CMDCOMPSLV		0x4884
+#define CMDBONUS0		0x488C
+#define CMDBONUS1		0x4890
+#define CMDVISALANECR0		0x4894
+#define CMDVISALANECR1		0x4898
+#define CMDVISACONTROLCR	0x489C
+#define CMDCLKGATE		0x48A0
+#define CMDTIMINGCTRL		0x48A4
+
+/* CH0-CLK-CTL */
+#define CCOBSCKEBBCTL		0x5800
+#define CCRCOMPIO		0x5804
+#define CCDLLTXCTL		0x5808
+#define CCDLLRXCTL		0x580C
+#define CCMDLLCTL		0x5810
+#define CCRCOMPODT		0x5814
+#define CCDLLPICODER0		0x5820
+#define CCDLLPICODER1		0x5824
+#define CCDDR3RESETCTL		0x5830
+#define CCCFGREG0		0x5838
+#define CCCFGREG1		0x5840
+#define CCPTRREG		0x5844
+#define CCCLKALIGNREG0		0x5850
+#define CCCLKALIGNREG1		0x5854
+#define CCCLKALIGNREG2		0x5858
+#define CCPMCONFIG0		0x585C
+#define CCPMDLYREG0		0x5860
+#define CCPMDLYREG1		0x5864
+#define CCPMDLYREG2		0x5868
+#define CCPMDLYREG3		0x586C
+#define CCPMDLYREG4		0x5870
+#define CCCLKALIGNSTS0		0x5874
+#define CCCLKALIGNSTS1		0x5878
+#define CCPMSTS0		0x587C
+#define CCPMSTS1		0x5880
+#define CCCOMPSLV1		0x5884
+#define CCCOMPSLV2		0x5888
+#define CCCOMPSLV3		0x588C
+#define CCBONUS0		0x5894
+#define CCBONUS1		0x5898
+#define CCVISALANECR0		0x589C
+#define CCVISALANECR1		0x58A0
+#define CCVISACONTROLCR		0x58A4
+#define CCCLKGATE		0x58A8
+#define CCTIMINGCTL		0x58AC
+
+/* COMP */
+#define CMPCTRL			0x6800
+#define SOFTRSTCNTL		0x6804
+#define MSCNTR			0x6808
+#define NMSCNTRL		0x680C
+#define LATCH1CTL		0x6814
+#define COMPVISALANECR0		0x681C
+#define COMPVISALANECR1		0x6820
+#define COMPVISACONTROLCR	0x6824
+#define COMPBONUS0		0x6830
+#define TCOCNTCTRL		0x683C
+#define DQANAODTPUCTL		0x6840
+#define DQANAODTPDCTL		0x6844
+#define DQANADRVPUCTL		0x6848
+#define DQANADRVPDCTL		0x684C
+#define DQANADLYPUCTL		0x6850
+#define DQANADLYPDCTL		0x6854
+#define DQANATCOPUCTL		0x6858
+#define DQANATCOPDCTL		0x685C
+#define CMDANADRVPUCTL		0x6868
+#define CMDANADRVPDCTL		0x686C
+#define CMDANADLYPUCTL		0x6870
+#define CMDANADLYPDCTL		0x6874
+#define CLKANAODTPUCTL		0x6880
+#define CLKANAODTPDCTL		0x6884
+#define CLKANADRVPUCTL		0x6888
+#define CLKANADRVPDCTL		0x688C
+#define CLKANADLYPUCTL		0x6890
+#define CLKANADLYPDCTL		0x6894
+#define CLKANATCOPUCTL		0x6898
+#define CLKANATCOPDCTL		0x689C
+#define DQSANAODTPUCTL		0x68A0
+#define DQSANAODTPDCTL		0x68A4
+#define DQSANADRVPUCTL		0x68A8
+#define DQSANADRVPDCTL		0x68AC
+#define DQSANADLYPUCTL		0x68B0
+#define DQSANADLYPDCTL		0x68B4
+#define DQSANATCOPUCTL		0x68B8
+#define DQSANATCOPDCTL		0x68BC
+#define CTLANADRVPUCTL		0x68C8
+#define CTLANADRVPDCTL		0x68CC
+#define CTLANADLYPUCTL		0x68D0
+#define CTLANADLYPDCTL		0x68D4
+#define CHNLBUFSTATIC		0x68F0
+#define COMPOBSCNTRL		0x68F4
+#define COMPBUFFDBG0		0x68F8
+#define COMPBUFFDBG1		0x68FC
+#define CFGMISCCH0		0x6900
+#define COMPEN0CH0		0x6904
+#define COMPEN1CH0		0x6908
+#define COMPEN2CH0		0x690C
+#define STATLEGEN0CH0		0x6910
+#define STATLEGEN1CH0		0x6914
+#define DQVREFCH0		0x6918
+#define CMDVREFCH0		0x691C
+#define CLKVREFCH0		0x6920
+#define DQSVREFCH0		0x6924
+#define CTLVREFCH0		0x6928
+#define TCOVREFCH0		0x692C
+#define DLYSELCH0		0x6930
+#define TCODRAMBUFODTCH0	0x6934
+#define CCBUFODTCH0		0x6938
+#define RXOFFSETCH0		0x693C
+#define DQODTPUCTLCH0		0x6940
+#define DQODTPDCTLCH0		0x6944
+#define DQDRVPUCTLCH0		0x6948
+#define DQDRVPDCTLCH0		0x694C
+#define DQDLYPUCTLCH0		0x6950
+#define DQDLYPDCTLCH0		0x6954
+#define DQTCOPUCTLCH0		0x6958
+#define DQTCOPDCTLCH0		0x695C
+#define CMDDRVPUCTLCH0		0x6968
+#define CMDDRVPDCTLCH0		0x696C
+#define CMDDLYPUCTLCH0		0x6970
+#define CMDDLYPDCTLCH0		0x6974
+#define CLKODTPUCTLCH0		0x6980
+#define CLKODTPDCTLCH0		0x6984
+#define CLKDRVPUCTLCH0		0x6988
+#define CLKDRVPDCTLCH0		0x698C
+#define CLKDLYPUCTLCH0		0x6990
+#define CLKDLYPDCTLCH0		0x6994
+#define CLKTCOPUCTLCH0		0x6998
+#define CLKTCOPDCTLCH0		0x699C
+#define DQSODTPUCTLCH0		0x69A0
+#define DQSODTPDCTLCH0		0x69A4
+#define DQSDRVPUCTLCH0		0x69A8
+#define DQSDRVPDCTLCH0		0x69AC
+#define DQSDLYPUCTLCH0		0x69B0
+#define DQSDLYPDCTLCH0		0x69B4
+#define DQSTCOPUCTLCH0		0x69B8
+#define DQSTCOPDCTLCH0		0x69BC
+#define CTLDRVPUCTLCH0		0x69C8
+#define CTLDRVPDCTLCH0		0x69CC
+#define CTLDLYPUCTLCH0		0x69D0
+#define CTLDLYPDCTLCH0		0x69D4
+#define FNLUPDTCTLCH0		0x69F0
+
+/* PLL */
+#define MPLLCTRL0		0x7800
+#define MPLLCTRL1		0x7808
+#define MPLLCSR0		0x7810
+#define MPLLCSR1		0x7814
+#define MPLLCSR2		0x7820
+#define MPLLDFT			0x7828
+#define MPLLMON0CTL		0x7830
+#define MPLLMON1CTL		0x7838
+#define MPLLMON2CTL		0x783C
+#define SFRTRIM			0x7850
+#define MPLLDFTOUT0		0x7858
+#define MPLLDFTOUT1		0x785C
+#define MASTERRSTN		0x7880
+#define PLLLOCKDEL		0x7884
+#define SFRDEL			0x7888
+#define CRUVISALANECR0		0x78F0
+#define CRUVISALANECR1		0x78F4
+#define CRUVISACONTROLCR	0x78F8
+#define IOSFVISALANECR0		0x78FC
+#define IOSFVISALANECR1		0x7900
+#define IOSFVISACONTROLCR	0x7904
+
+/* END DDRIO Registers */
+
+/* DRAM Specific Message Bus OpCodes */
+#define MSG_OP_DRAM_INIT	0x68
+#define MSG_OP_DRAM_WAKE	0xCA
+
+#define SAMPLE_SIZE		6
+
+/* must be less than this number to enable early deadband */
+#define EARLY_DB		0x12
+/* must be greater than this number to enable late deadband */
+#define LATE_DB			0x34
+
+#define CHX_REGS		(11 * 4)
+#define FULL_CLK		128
+#define HALF_CLK		64
+#define QRTR_CLK		32
+
+#define MCEIL(num, den)		((uint8_t)((num + den - 1) / den))
+#define MMAX(a, b)		((a) > (b) ? (a) : (b))
+#define DEAD_LOOP()		for (;;);
+
+#define MIN_RDQS_EYE		10	/* in PI Codes */
+#define MIN_VREF_EYE		10	/* in VREF Codes */
+/* how many RDQS codes to jump while margining */
+#define RDQS_STEP		1
+/* how many VREF codes to jump while margining */
+#define VREF_STEP		1
+/* offset into "vref_codes[]" for minimum allowed VREF setting */
+#define VREF_MIN		0x00
+/* offset into "vref_codes[]" for maximum allowed VREF setting */
+#define VREF_MAX		0x3F
+#define RDQS_MIN		0x00	/* minimum RDQS delay value */
+#define RDQS_MAX		0x3F	/* maximum RDQS delay value */
+
+/* how many WDQ codes to jump while margining */
+#define WDQ_STEP		1
+
+enum {
+	B,	/* BOTTOM VREF */
+	T	/* TOP VREF */
+};
+
+enum {
+	L,	/* LEFT RDQS */
+	R	/* RIGHT RDQS */
+};
+
+/* Memory Options */
+
+/* enable STATIC timing settings for RCVN (BACKUP_MODE) */
+#undef BACKUP_RCVN
+/* enable STATIC timing settings for WDQS (BACKUP_MODE) */
+#undef BACKUP_WDQS
+/* enable STATIC timing settings for RDQS (BACKUP_MODE) */
+#undef BACKUP_RDQS
+/* enable STATIC timing settings for WDQ (BACKUP_MODE) */
+#undef BACKUP_WDQ
+/* enable *COMP overrides (BACKUP_MODE) */
+#undef BACKUP_COMPS
+/* enable the RD_TRAIN eye check */
+#undef RX_EYE_CHECK
+
+/* enable Host to Memory Clock Alignment */
+#define HMC_TEST
+/* enable multi-rank support via rank2rank sharing */
+#define R2R_SHARING
+/* disable signals not used in 16bit mode of DDRIO */
+#define FORCE_16BIT_DDRIO
+
+#define PLATFORM_ID		1
+
+void clear_self_refresh(struct mrc_params *mrc_params);
+void prog_ddr_timing_control(struct mrc_params *mrc_params);
+void prog_decode_before_jedec(struct mrc_params *mrc_params);
+void perform_ddr_reset(struct mrc_params *mrc_params);
+void ddrphy_init(struct mrc_params *mrc_params);
+void perform_jedec_init(struct mrc_params *mrc_params);
+void set_ddr_init_complete(struct mrc_params *mrc_params);
+void restore_timings(struct mrc_params *mrc_params);
+void default_timings(struct mrc_params *mrc_params);
+void rcvn_cal(struct mrc_params *mrc_params);
+void wr_level(struct mrc_params *mrc_params);
+void prog_page_ctrl(struct mrc_params *mrc_params);
+void rd_train(struct mrc_params *mrc_params);
+void wr_train(struct mrc_params *mrc_params);
+void store_timings(struct mrc_params *mrc_params);
+void enable_scrambling(struct mrc_params *mrc_params);
+void prog_ddr_control(struct mrc_params *mrc_params);
+void prog_dra_drb(struct mrc_params *mrc_params);
+void perform_wake(struct mrc_params *mrc_params);
+void change_refresh_period(struct mrc_params *mrc_params);
+void set_auto_refresh(struct mrc_params *mrc_params);
+void ecc_enable(struct mrc_params *mrc_params);
+void memory_test(struct mrc_params *mrc_params);
+void lock_registers(struct mrc_params *mrc_params);
+
+#endif /* _SMC_H_ */
--- a/arch/x86/cpu/queensbay/Kconfig
+++ b/arch/x86/cpu/queensbay/Kconfig
@ -11,44 +11,6 @@ config INTEL_QUEENSBAY

 if INTEL_QUEENSBAY

-config HAVE_FSP
-	bool "Add an Firmware Support Package binary"
-	help
-	  Select this option to add an Firmware Support Package binary to
-	  the resulting U-Boot image. It is a binary blob which U-Boot uses
-	  to set up SDRAM and other chipset specific initialization.
-
-	  Note: Without this binary U-Boot will not be able to set up its
-	  SDRAM so will not boot.
-
-config FSP_FILE
-	string "Firmware Support Package binary filename"
-	depends on HAVE_FSP
-	default "fsp.bin"
-	help
-	  The filename of the file to use as Firmware Support Package binary
-	  in the board directory.
-
-config FSP_ADDR
-	hex "Firmware Support Package binary location"
-	depends on HAVE_FSP
-	default 0xfffc0000
-	help
-	  FSP is not Position Independent Code (PIC) and the whole FSP has to
-	  be rebased if it is placed at a location which is different from the
-	  perferred base address specified during the FSP build. Use Intel's
-	  Binary Configuration Tool (BCT) to do the rebase.
-
-	  The default base address of 0xfffc0000 indicates that the binary must
-	  be located at offset 0xc0000 from the beginning of a 1MB flash device.
-
-config FSP_TEMP_RAM_ADDR
-	hex
-	default 0x2000000
-	help
-	  Stack top address which is used in FspInit after DRAM is ready and
-	  CAR is disabled.
-
 config HAVE_CMC
 	bool "Add a Chipset Micro Code state machine binary"
 	help
--- a/arch/x86/cpu/queensbay/Makefile
+++ b/arch/x86/cpu/queensbay/Makefile
@ -4,6 +4,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #

-obj-y += tnc_car.o tnc_dram.o tnc.o topcliff.o
-obj-y += fsp_configs.o fsp_support.o
+obj-y += fsp_configs.o
+obj-y += tnc.o topcliff.o
 obj-$(CONFIG_PCI) += tnc_pci.o
--- a/arch/x86/cpu/queensbay/fsp_configs.c
+++ b/arch/x86/cpu/queensbay/fsp_configs.c
@ -6,7 +6,7 @@
 */

 #include <common.h>
-#include <asm/arch/fsp/fsp_support.h>
+#include <asm/fsp/fsp_support.h>

 void update_fsp_upd(struct upd_region *fsp_upd)
 {
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@ -9,7 +9,7 @@
 #include <asm/pci.h>
 #include <asm/post.h>
 #include <asm/arch/tnc.h>
-#include <asm/arch/fsp/fsp_support.h>
+#include <asm/fsp/fsp_support.h>
 #include <asm/processor.h>

 static void unprotect_spi_flash(void)
@ -43,30 +43,3 @@ int arch_cpu_init(void)

 	return 0;
 }
-
-int print_cpuinfo(void)
-{
-	post_code(POST_CPU_INFO);
-	return default_print_cpuinfo();
-}
-
-void reset_cpu(ulong addr)
-{
-	/* cold reset */
-	outb(0x06, PORT_RESET);
-}
-
-void board_final_cleanup(void)
-{
-	u32 status;
-
-	/* call into FspNotify */
-	debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
-	status = fsp_notify(NULL, INIT_PHASE_BOOT);
-	if (status != FSP_SUCCESS)
-		debug("fail, error code %x\n", status);
-	else
-		debug("OK\n");
-
-	return;
-}
--- a/arch/x86/cpu/queensbay/tnc_pci.c
+++ b/arch/x86/cpu/queensbay/tnc_pci.c
@ -7,7 +7,7 @@
 #include <common.h>
 #include <pci.h>
 #include <asm/pci.h>
-#include <asm/arch/fsp/fsp_support.h>
+#include <asm/fsp/fsp_support.h>

 DECLARE_GLOBAL_DATA_PTR;

@ -44,18 +44,3 @@ void board_pci_setup_hose(struct pci_controller *hose)

 	hose->region_count = 4;
 }
-
-int board_pci_post_scan(struct pci_controller *hose)
-{
-	u32 status;
-
-	/* call into FspNotify */
-	debug("Calling into FSP (notify phase INIT_PHASE_PCI): ");
-	status = fsp_notify(NULL, INIT_PHASE_PCI);
-	if (status != FSP_SUCCESS)
-		debug("fail, error code %x\n", status);
-	else
-		debug("OK\n");
-
-	return 0;
-}
--- a/arch/x86/cpu/queensbay/topcliff.c
+++ b/arch/x86/cpu/queensbay/topcliff.c
@ -5,43 +5,16 @@
 */

 #include <common.h>
-#include <errno.h>
-#include <malloc.h>
-#include <pci.h>
+#include <mmc.h>
 #include <pci_ids.h>
-#include <sdhci.h>

 static struct pci_device_id mmc_supported[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_0 },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SDIO_1 },
-	{ }
 };

 int cpu_mmc_init(bd_t *bis)
 {
-	struct sdhci_host *mmc_host;
-	pci_dev_t devbusfn;
-	u32 iobase;
-	int ret;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mmc_supported); i++) {
-		devbusfn =  pci_find_devices(mmc_supported, i);
-		if (devbusfn == -1)
-			return -ENODEV;
-
-		mmc_host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
-		if (!mmc_host)
-			return -ENOMEM;
-
-		mmc_host->name = "Topcliff SDHCI";
-		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &iobase);
-		mmc_host->ioaddr = (void *)iobase;
-		mmc_host->quirks = 0;
-		ret = add_sdhci(mmc_host, 0, 0);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
+	return pci_mmc_init("Topcliff SDHCI", mmc_supported,
+			    ARRAY_SIZE(mmc_supported));
 }
--- a/arch/x86/dts/Makefile
+++ b/arch/x86/dts/Makefile
@ -1,5 +1,7 @@
 dtb-y += chromebook_link.dtb \
-	crownbay.dtb
+	crownbay.dtb \
+	galileo.dtb \
+	minnowmax.dtb

 targets += $(dtb-y)

--- a/arch/x86/dts/galileo.dts
+++ b/arch/x86/dts/galileo.dts
@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/mrc/quark.h>
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Intel Galileo";
+	compatible = "intel,galileo", "intel,quark";
+
+	config {
+		silent_console = <0>;
+	};
+
+	chosen {
+		stdout-path = &pciuart0;
+	};
+
+	mrc {
+		compatible = "intel,quark-mrc";
+		flags = <MRC_FLAG_SCRAMBLE_EN>;
+		dram-width = <DRAM_WIDTH_X8>;
+		dram-speed = <DRAM_FREQ_800>;
+		dram-type = <DRAM_TYPE_DDR3>;
+		rank-mask = <DRAM_RANK(0)>;
+		chan-mask = <DRAM_CHANNEL(0)>;
+		chan-width = <DRAM_CHANNEL_WIDTH_X16>;
+		addr-mode = <DRAM_ADDR_MODE0>;
+		refresh-rate = <DRAM_REFRESH_RATE_785US>;
+		sr-temp-range = <DRAM_SRT_RANGE_NORMAL>;
+		ron-value = <DRAM_RON_34OHM>;
+		rtt-nom-value = <DRAM_RTT_NOM_120OHM>;
+		rd-odt-value = <DRAM_RD_ODT_OFF>;
+		dram-density = <DRAM_DENSITY_1G>;
+		dram-cl = <6>;
+		dram-ras = <0x0000927c>;
+		dram-wtr = <0x00002710>;
+		dram-rrd = <0x00002710>;
+		dram-faw = <0x00009c40>;
+	};
+
+	pci {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		compatible = "intel,pci";
+		device_type = "pci";
+
+		pciuart0: uart@14,5 {
+			compatible = "pci8086,0936.00",
+					"pci8086,0936",
+					"pciclass,070002",
+					"pciclass,0700",
+					"x86-uart";
+			reg = <0x0000a500 0x0 0x0 0x0 0x0
+			       0x0200a510 0x0 0x0 0x0 0x0>;
+			reg-shift = <2>;
+			clock-frequency = <44236800>;
+			current-speed = <115200>;
+		};
+	};
+
+	gpioa {
+		compatible = "intel,ich6-gpio";
+		u-boot,dm-pre-reloc;
+		reg = <0 0x20>;
+		bank-name = "A";
+	};
+
+	gpiob {
+		compatible = "intel,ich6-gpio";
+		u-boot,dm-pre-reloc;
+		reg = <0x20 0x20>;
+		bank-name = "B";
+	};
+
+	spi {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "intel,ich-spi";
+		spi-flash@0 {
+			#size-cells = <1>;
+			#address-cells = <1>;
+			reg = <0>;
+			compatible = "winbond,w25q64", "spi-flash";
+			memory-map = <0xff800000 0x00800000>;
+		};
+	};
+
+};
--- a/arch/x86/dts/microcode/m0130673322.dtsi
+++ b/arch/x86/dts/microcode/m0130673322.dtsi
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+/include/ "serial.dtsi"
+
+/ {
+	model = "Intel Minnowboard Max";
+	compatible = "intel,minnowmax", "intel,baytrail";
+
+	aliases {
+		serial0 = &serial;
+	};
+
+	config {
+		silent_console = <0>;
+	};
+
+	chosen {
+		stdout-path = "/serial";
+	};
+
+	spi {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "intel,ich";
+		spi-flash@0 {
+			reg = <0>;
+			compatible = "sst,25vf016b", "spi-flash";
+			memory-map = <0xff800000 0x00800000>;
+		};
+	};
+
+	microcode {
+		update@0 {
+#include "microcode/m0130673322.dtsi"
+		};
+	};
+
+};
--- a/arch/x86/dts/serial.dtsi
+++ b/arch/x86/dts/serial.dtsi
@ -1,5 +1,5 @@
 / {
-	serial {
+	serial: serial {
 		compatible = "x86-uart";
 		reg = <0x3f8 8>;
 		reg-shift = <0>;
--- a/arch/x86/include/asm/arch-baytrail/fsp/azalia.h
+++ b/arch/x86/include/asm/arch-baytrail/fsp/azalia.h
@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#ifndef _FSP_AZALIA_H_
+#define _FSP_AZALIA_H_
+
+struct __packed pch_azalia_verb_table_header {
+	uint32_t vendor_device_id;
+	uint16_t sub_system_id;
+	uint8_t revision_id;		/* 0xff applies to all steppings */
+	uint8_t front_panel_support;
+	uint16_t number_of_rear_jacks;
+	uint16_t number_of_front_jacks;
+};
+
+struct __packed pch_azalia_verb_table {
+	struct pch_azalia_verb_table_header verb_table_header;
+	const uint32_t *verb_table_data;
+};
+
+struct __packed pch_azalia_config {
+	uint8_t pme_enable:1;
+	uint8_t docking_supported:1;
+	uint8_t docking_attached:1;
+	uint8_t hdmi_codec_enable:1;
+	uint8_t azalia_v_ci_enable:1;
+	uint8_t rsvdbits:3;
+	/* number of verb tables provided by platform */
+	uint8_t azalia_verb_table_num;
+	const struct pch_azalia_verb_table *azalia_verb_table;
+	/* delay timer after azalia reset */
+	uint16_t reset_wait_timer_us;
+};
+
+#endif
--- a/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
+++ b/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#ifndef __FSP_VPD_H
+#define __FSP_VPD_H
+
+struct memory_down_data {
+	uint8_t enable_memory_down;
+	uint8_t dram_speed;
+	uint8_t dram_type;
+	uint8_t dimm_0_enable;
+	uint8_t dimm_1_enable;
+	uint8_t dimm_width;
+	uint8_t dimm_density;
+	uint8_t dimm_bus_width;
+	uint8_t dimm_sides;			/* Ranks Per dimm_ */
+	uint8_t dimm_tcl;			/* tCL */
+	/* tRP and tRCD in DRAM clk - 5:12.5ns, 6:15ns, etc. */
+	uint8_t dimm_trpt_rcd;
+	uint8_t dimm_twr;			/* tWR in DRAM clk  */
+	uint8_t dimm_twtr;			/* tWTR in DRAM clk */
+	uint8_t dimm_trrd;			/* tRRD in DRAM clk */
+	uint8_t dimm_trtp;			/* tRTP in DRAM clk */
+	uint8_t dimm_tfaw;			/* tFAW in DRAM clk */
+};
+
+struct __packed upd_region {
+	uint64_t signature;			/* Offset 0x0000 */
+	uint8_t reserved0[24];			/* Offset 0x0008 */
+	uint16_t mrc_init_tseg_size;		/* Offset 0x0020 */
+	uint16_t mrc_init_mmio_size;		/* Offset 0x0022 */
+	uint8_t mrc_init_spd_addr1;		/* Offset 0x0024 */
+	uint8_t mrc_init_spd_addr2;		/* Offset 0x0025 */
+	uint8_t emmc_boot_mode;			/* Offset 0x0026 */
+	uint8_t enable_sdio;			/* Offset 0x0027 */
+	uint8_t enable_sdcard;			/* Offset 0x0028 */
+	uint8_t enable_hsuart0;			/* Offset 0x0029 */
+	uint8_t enable_hsuart1;			/* Offset 0x002a */
+	uint8_t enable_spi;			/* Offset 0x002b */
+	uint8_t reserved1;			/* Offset 0x002c */
+	uint8_t enable_sata;			/* Offset 0x002d */
+	uint8_t sata_mode;			/* Offset 0x002e */
+	uint8_t enable_azalia;			/* Offset 0x002f */
+	uint32_t azalia_config_ptr;		/* Offset 0x0030 */
+	uint8_t enable_xhci;			/* Offset 0x0034 */
+	uint8_t enable_lpe;			/* Offset 0x0035 */
+	uint8_t lpss_sio_enable_pci_mode;	/* Offset 0x0036 */
+	uint8_t enable_dma0;			/* Offset 0x0037 */
+	uint8_t enable_dma1;			/* Offset 0x0038 */
+	uint8_t enable_i2_c0;			/* Offset 0x0039 */
+	uint8_t enable_i2_c1;			/* Offset 0x003a */
+	uint8_t enable_i2_c2;			/* Offset 0x003b */
+	uint8_t enable_i2_c3;			/* Offset 0x003c */
+	uint8_t enable_i2_c4;			/* Offset 0x003d */
+	uint8_t enable_i2_c5;			/* Offset 0x003e */
+	uint8_t enable_i2_c6;			/* Offset 0x003f */
+	uint8_t enable_pwm0;			/* Offset 0x0040 */
+	uint8_t enable_pwm1;			/* Offset 0x0041 */
+	uint8_t enable_hsi;			/* Offset 0x0042 */
+	uint8_t igd_dvmt50_pre_alloc;		/* Offset 0x0043 */
+	uint8_t aperture_size;			/* Offset 0x0044 */
+	uint8_t gtt_size;			/* Offset 0x0045 */
+	uint32_t serial_debug_port_address;	/* Offset 0x0046 */
+	uint8_t serial_debug_port_type;		/* Offset 0x004a */
+	uint8_t mrc_debug_msg;			/* Offset 0x004b */
+	uint8_t isp_enable;			/* Offset 0x004c */
+	uint8_t scc_enable_pci_mode;		/* Offset 0x004d */
+	uint8_t igd_render_standby;		/* Offset 0x004e */
+	uint8_t txe_uma_enable;			/* Offset 0x004f */
+	uint8_t os_selection;			/* Offset 0x0050 */
+	uint8_t emmc45_ddr50_enabled;		/* Offset 0x0051 */
+	uint8_t emmc45_hs200_enabled;		/* Offset 0x0052 */
+	uint8_t emmc45_retune_timer_value;	/* Offset 0x0053 */
+	uint8_t unused_upd_space1[156];		/* Offset 0x0054 */
+	struct memory_down_data memory_params;	/* Offset 0x00f0 */
+	uint16_t terminator;			/* Offset 0x0100 */
+};
+
+#define VPD_IMAGE_ID		0x3157454956594C56	/* 'VLYVIEW1' */
+#define VPD_IMAGE_REV		0x00000303
+
+struct __packed vpd_region {
+	uint64_t sign;				/* Offset 0x0000 */
+	uint32_t img_rev;			/* Offset 0x0008 */
+	uint32_t upd_offset;			/* Offset 0x000c */
+	uint8_t unused[16];			/* Offset 0x0010 */
+	uint32_t fsp_res_memlen;		/* Offset 0x0020 */
+	uint8_t platform_type;			/* Offset 0x0024 */
+	uint8_t enable_secure_boot;		/* Offset 0x0025 */
+};
+#endif
--- a/arch/x86/include/asm/arch-baytrail/gpio.h
+++ b/arch/x86/include/asm/arch-baytrail/gpio.h
@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _X86_ARCH_GPIO_H_
+#define _X86_ARCH_GPIO_H_
+
+/* Where in config space is the register that points to the GPIO registers? */
+#define PCI_CFG_GPIOBASE 0x44
+
+#endif /* _X86_ARCH_GPIO_H_ */
--- a/arch/x86/include/asm/arch-ivybridge/sandybridge.h
+++ b/arch/x86/include/asm/arch-ivybridge/sandybridge.h
@ -43,7 +43,7 @@
 #define DEFAULT_EPBAR		0xfed19000	/* 4 KB */
 #define DEFAULT_RCBABASE	0xfed1c000
 /* 4 KB per PCIe device */
-#define DEFAULT_PCIEXBAR	CONFIG_MMCONF_BASE_ADDRESS
+#define DEFAULT_PCIEXBAR	CONFIG_PCIE_ECAM_BASE

 /* Device 0:0.0 PCI configuration space (Host Bridge) */
 #define EPBAR		0x40
--- a/arch/x86/include/asm/arch-quark/device.h
+++ b/arch/x86/include/asm/arch-quark/device.h
@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _QUARK_DEVICE_H_
+#define _QUARK_DEVICE_H_
+
+#include <pci.h>
+
+#define QUARK_HOST_BRIDGE	PCI_BDF(0, 0, 0)
+#define QUARK_MMC_SDIO		PCI_BDF(0, 20, 0)
+#define QUARK_UART0		PCI_BDF(0, 20, 1)
+#define QUARK_USB_DEVICE	PCI_BDF(0, 20, 2)
+#define QUARK_USB_EHCI		PCI_BDF(0, 20, 3)
+#define QUARK_USB_OHCI		PCI_BDF(0, 20, 4)
+#define QUARK_UART1		PCI_BDF(0, 20, 5)
+#define QUARK_EMAC0		PCI_BDF(0, 20, 6)
+#define QUARK_EMAC1		PCI_BDF(0, 20, 7)
+#define QUARK_SPI0		PCI_BDF(0, 21, 0)
+#define QUARK_SPI1		PCI_BDF(0, 21, 1)
+#define QUARK_I2C_GPIO		PCI_BDF(0, 21, 2)
+#define QUARK_PCIE0		PCI_BDF(0, 23, 0)
+#define QUARK_PCIE1		PCI_BDF(0, 23, 1)
+#define QUARK_LEGACY_BRIDGE	PCI_BDF(0, 31, 0)
+
+#endif /* _QUARK_DEVICE_H_ */
--- a/arch/x86/include/asm/arch-quark/gpio.h
+++ b/arch/x86/include/asm/arch-quark/gpio.h
@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _X86_ARCH_GPIO_H_
+#define _X86_ARCH_GPIO_H_
+
+/* Where in config space is the register that points to the GPIO registers? */
+#define PCI_CFG_GPIOBASE 0x44
+
+#endif /* _X86_ARCH_GPIO_H_ */
--- a/arch/x86/include/asm/arch-quark/mrc.h
+++ b/arch/x86/include/asm/arch-quark/mrc.h
@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ *
+ * SPDX-License-Identifier:	Intel
+ */
+
+#ifndef _MRC_H_
+#define _MRC_H_
+
+#define MRC_VERSION	0x0111
+
+/* architectural definitions */
+#define NUM_CHANNELS	1	/* number of channels */
+#define NUM_RANKS	2	/* number of ranks per channel */
+#define NUM_BYTE_LANES	4	/* number of byte lanes per channel */
+
+/* software limitations */
+#define MAX_CHANNELS	1
+#define MAX_RANKS	2
+#define MAX_BYTE_LANES	4
+
+#define MAX_SOCKETS	1
+#define MAX_SIDES	1
+#define MAX_ROWS	(MAX_SIDES * MAX_SOCKETS)
+
+/* Specify DRAM and channel width */
+enum {
+	X8,	/* DRAM width */
+	X16,	/* DRAM width & Channel Width */
+	X32	/* Channel Width */
+};
+
+/* Specify DRAM speed */
+enum {
+	DDRFREQ_800,
+	DDRFREQ_1066
+};
+
+/* Specify DRAM type */
+enum {
+	DDR3,
+	DDR3L
+};
+
+/*
+ * density: 0=512Mb, 1=Gb, 2=2Gb, 3=4Gb
+ * cl: DRAM CAS Latency in clocks
+ * ras: ACT to PRE command period
+ * wtr: Delay from start of internal write transaction to internal read command
+ * rrd: ACT to ACT command period (JESD79 specific to page size 1K/2K)
+ * faw: Four activate window (JESD79 specific to page size 1K/2K)
+ *
+ * ras/wtr/rrd/faw timings are in picoseconds
+ *
+ * Refer to JEDEC spec (or DRAM datasheet) when changing these values.
+ */
+struct dram_params {
+	uint8_t density;
+	uint8_t cl;
+	uint32_t ras;
+	uint32_t wtr;
+	uint32_t rrd;
+	uint32_t faw;
+};
+
+/*
+ * Delay configuration for individual signals
+ * Vref setting
+ * Scrambler seed
+ */
+struct mrc_timings {
+	uint32_t rcvn[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t rdqs[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t wdqs[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t wdq[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t vref[NUM_CHANNELS][NUM_BYTE_LANES];
+	uint32_t wctl[NUM_CHANNELS][NUM_RANKS];
+	uint32_t wcmd[NUM_CHANNELS];
+	uint32_t scrambler_seed;
+	/* need to save for the case of frequency change */
+	uint8_t ddr_speed;
+};
+
+/* Boot mode defined as bit mask (1<<n) */
+enum {
+	BM_UNKNOWN,
+	BM_COLD = 1,	/* full training */
+	BM_FAST = 2,	/* restore timing parameters */
+	BM_S3   = 4,	/* resume from S3 */
+	BM_WARM = 8
+};
+
+/* MRC execution status */
+#define MRC_SUCCESS	0	/* initialization ok */
+#define MRC_E_MEMTEST	1	/* memtest failed */
+
+/*
+ * Memory Reference Code parameters
+ *
+ * It includes 3 parts:
+ * - input parameters like boot mode and DRAM parameters
+ * - context parameters for MRC internal state
+ * - output parameters like initialization result and memory size
+ */
+struct mrc_params {
+	/* Input parameters */
+	uint32_t boot_mode;		/* BM_COLD, BM_FAST, BM_WARM, BM_S3 */
+	/* DRAM parameters */
+	uint8_t dram_width;		/* x8, x16 */
+	uint8_t ddr_speed;		/* DDRFREQ_800, DDRFREQ_1066 */
+	uint8_t ddr_type;		/* DDR3, DDR3L */
+	uint8_t ecc_enables;		/* 0, 1 (memory size reduced to 7/8) */
+	uint8_t scrambling_enables;	/* 0, 1 */
+	/* 1, 3 (1'st rank has to be populated if 2'nd rank present) */
+	uint32_t rank_enables;
+	uint32_t channel_enables;	/* 1 only */
+	uint32_t channel_width;		/* x16 only */
+	/* 0, 1, 2 (mode 2 forced if ecc enabled) */
+	uint32_t address_mode;
+	/* REFRESH_RATE: 1=1.95us, 2=3.9us, 3=7.8us, others=RESERVED */
+	uint8_t refresh_rate;
+	/* SR_TEMP_RANGE: 0=normal, 1=extended, others=RESERVED */
+	uint8_t sr_temp_range;
+	/*
+	 * RON_VALUE: 0=34ohm, 1=40ohm, others=RESERVED
+	 * (select MRS1.DIC driver impedance control)
+	 */
+	uint8_t ron_value;
+	/* RTT_NOM_VALUE: 0=40ohm, 1=60ohm, 2=120ohm, others=RESERVED */
+	uint8_t rtt_nom_value;
+	/* RD_ODT_VALUE: 0=off, 1=60ohm, 2=120ohm, 3=180ohm, others=RESERVED */
+	uint8_t rd_odt_value;
+	struct dram_params params;
+	/* Internally used context parameters */
+	uint32_t board_id;	/* board layout (use x8 or x16 memory) */
+	uint32_t hte_setup;	/* when set hte reconfiguration requested */
+	uint32_t menu_after_mrc;
+	uint32_t power_down_disable;
+	uint32_t tune_rcvn;
+	uint32_t channel_size[NUM_CHANNELS];
+	uint32_t column_bits[NUM_CHANNELS];
+	uint32_t row_bits[NUM_CHANNELS];
+	uint32_t mrs1;		/* register content saved during training */
+	uint8_t first_run;
+	/* Output parameters */
+	/* initialization result (non zero specifies error code) */
+	uint32_t status;
+	/* total memory size in bytes (excludes ECC banks) */
+	uint32_t mem_size;
+	/* training results (also used on input) */
+	struct mrc_timings timings;
+};
+
+/*
+ * MRC memory initialization structure
+ *
+ * post_code: a 16-bit post code of a specific initialization routine
+ * boot_path: bitwise or of BM_COLD, BM_FAST, BM_WARM and BM_S3
+ * init_fn: real memory initialization routine
+ */
+struct mem_init {
+	uint16_t post_code;
+	uint16_t boot_path;
+	void (*init_fn)(struct mrc_params *mrc_params);
+};
+
+/* MRC platform data flags */
+#define MRC_FLAG_ECC_EN		0x00000001
+#define MRC_FLAG_SCRAMBLE_EN	0x00000002
+#define MRC_FLAG_MEMTEST_EN	0x00000004
+/* 0b DDR "fly-by" topology else 1b DDR "tree" topology */
+#define MRC_FLAG_TOP_TREE_EN	0x00000008
+/* If set ODR signal is asserted to DRAM devices on writes */
+#define MRC_FLAG_WR_ODT_EN	0x00000010
+
+/**
+ * mrc_init - Memory Reference Code initialization entry routine
+ *
+ * @mrc_params: parameters for MRC
+ */
+void mrc_init(struct mrc_params *mrc_params);
+
+#endif /* _MRC_H_ */
--- a/arch/x86/include/asm/arch-quark/msg_port.h
+++ b/arch/x86/include/asm/arch-quark/msg_port.h
@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _QUARK_MSG_PORT_H_
+#define _QUARK_MSG_PORT_H_
+
+/*
+ * In the Quark SoC, some chipset commands are accomplished by utilizing
+ * the internal message network within the host bridge (D0:F0). Accesses
+ * to this network are accomplished by populating the message control
+ * register (MCR), Message Control Register eXtension (MCRX) and the
+ * message data register (MDR).
+ */
+#define MSG_CTRL_REG		0xd0	/* Message Control Register */
+#define MSG_DATA_REG		0xd4	/* Message Data Register */
+#define MSG_CTRL_EXT_REG	0xd8	/* Message Control Register EXT */
+
+/* Normal Read/Write OpCodes */
+#define MSG_OP_READ		0x10
+#define MSG_OP_WRITE		0x11
+
+/* Alternative Read/Write OpCodes */
+#define MSG_OP_ALT_READ		0x06
+#define MSG_OP_ALT_WRITE	0x07
+
+/* IO Read/Write OpCodes */
+#define MSG_OP_IO_READ		0x02
+#define MSG_OP_IO_WRITE		0x03
+
+/* All byte enables */
+#define MSG_BYTE_ENABLE		0xf0
+
+#ifndef __ASSEMBLY__
+
+/**
+ * msg_port_setup - set up the message port control register
+ *
+ * @op:     message bus access opcode
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ */
+void msg_port_setup(int op, int port, int reg);
+
+/**
+ * msg_port_read - read a message port register using normal opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ *
+ * @return: message port register value
+ */
+u32 msg_port_read(u8 port, u32 reg);
+
+/**
+ * msg_port_write - write a message port register using normal opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ * @value:  register value to write
+ */
+void msg_port_write(u8 port, u32 reg, u32 value);
+
+/**
+ * msg_port_alt_read - read a message port register using alternative opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ *
+ * @return: message port register value
+ */
+u32 msg_port_alt_read(u8 port, u32 reg);
+
+/**
+ * msg_port_alt_write - write a message port register using alternative opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ * @value:  register value to write
+ */
+void msg_port_alt_write(u8 port, u32 reg, u32 value);
+
+/**
+ * msg_port_io_read - read a message port register using I/O opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ *
+ * @return: message port register value
+ */
+u32 msg_port_io_read(u8 port, u32 reg);
+
+/**
+ * msg_port_io_write - write a message port register using I/O opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ * @value:  register value to write
+ */
+void msg_port_io_write(u8 port, u32 reg, u32 value);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _QUARK_MSG_PORT_H_ */
--- a/arch/x86/include/asm/arch-quark/quark.h
+++ b/arch/x86/include/asm/arch-quark/quark.h
@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _QUARK_H_
+#define _QUARK_H_
+
+/* Message Bus Ports */
+#define MSG_PORT_MEM_ARBITER	0x00
+#define MSG_PORT_HOST_BRIDGE	0x03
+#define MSG_PORT_RMU		0x04
+#define MSG_PORT_MEM_MGR	0x05
+#define MSG_PORT_SOC_UNIT	0x31
+
+/* Port 0x00: Memory Arbiter Message Port Registers */
+
+/* Enhanced Configuration Space */
+#define AEC_CTRL		0x00
+
+/* Port 0x03: Host Bridge Message Port Registers */
+
+/* Host Memory I/O Boundary */
+#define HM_BOUND		0x08
+
+/* Extended Configuration Space */
+#define HEC_REG			0x09
+
+/* Port 0x04: Remote Management Unit Message Port Registers */
+
+/* ACPI PBLK Base Address Register */
+#define PBLK_BA			0x70
+
+/* SPI DMA Base Address Register */
+#define SPI_DMA_BA		0x7a
+
+/* Port 0x05: Memory Manager Message Port Registers */
+
+/* eSRAM Block Page Control */
+#define ESRAM_BLK_CTRL		0x82
+#define ESRAM_BLOCK_MODE	0x10000000
+
+/* DRAM */
+#define DRAM_BASE		0x00000000
+#define DRAM_MAX_SIZE		0x80000000
+
+/* eSRAM */
+#define ESRAM_SIZE		0x80000
+
+/* Memory BAR Enable */
+#define MEM_BAR_EN		0x00000001
+
+/* I/O BAR Enable */
+#define IO_BAR_EN		0x80000000
+
+/* 64KiB of RMU binary in flash */
+#define RMU_BINARY_SIZE		0x10000
+
+/* Legacy Bridge PCI Configuration Registers */
+#define LB_GBA			0x44
+#define LB_PM1BLK		0x48
+#define LB_GPE0BLK		0x4c
+#define LB_ACTL			0x58
+#define LB_PABCDRC		0x60
+#define LB_PEFGHRC		0x64
+#define LB_WDTBA		0x84
+#define LB_BCE			0xd4
+#define LB_BC			0xd8
+#define LB_RCBA			0xf0
+
+#endif /* _QUARK_H_ */
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h
@ -10,8 +10,6 @@
 #ifndef __VPDHEADER_H__
 #define __VPDHEADER_H__

-#define UPD_TERMINATOR	0x55AA
-
 struct __packed upd_region {
 	u64	sign;			/* Offset 0x0000 */
 	u64	reserved;		/* Offset 0x0008 */
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h
@ -8,6 +8,8 @@
 #ifndef __FSP_API_H__
 #define __FSP_API_H__

+#include <linux/linkage.h>
+
 /*
 * FspInit continuation function prototype.
 * Control will be returned to this callback function after FspInit API call.
@ -47,9 +49,9 @@ struct fsp_notify_params {
 };

 /* FspInit API function prototype */
-typedef u32 (*fsp_init_f)(struct fsp_init_params *params);
+typedef asmlinkage u32 (*fsp_init_f)(struct fsp_init_params *params);

 /* FspNotify API function prototype */
-typedef u32 (*fsp_notify_f)(struct fsp_notify_params *params);
+typedef asmlinkage u32 (*fsp_notify_f)(struct fsp_notify_params *params);

 #endif
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h
@ -16,7 +16,7 @@
 #include "fsp_platform.h"
 #include "fsp_infoheader.h"
 #include "fsp_bootmode.h"
-#include "fsp_vpd.h"
+#include <asm/arch/fsp/fsp_vpd.h>

 struct shared_data {
 	struct fsp_header	*fsp_hdr;
@ -26,6 +26,8 @@ struct shared_data {

 #define FSP_LOWMEM_BASE		0x100000UL
 #define FSP_HIGHMEM_BASE	0x100000000ULL
+#define UPD_TERMINATOR		0x55AA
+

 /**
 * FSP Continuation assembly helper routine
@ -61,7 +63,7 @@ void fsp_continue(struct shared_data *shared_data, u32 status,
 *
 * @retval: the offset of FSP header. If signature is invalid, returns 0.
 */
-u32 find_fsp_header(void);
+struct fsp_header *find_fsp_header(void);

 /**
 * FSP initialization wrapper function.
--- a/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@ -1,4 +1,3 @@
-
 /*
 * (C) Copyright 2002
 * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
@ -9,6 +8,14 @@
 #ifndef _PCI_I386_H_
 #define _PCI_I386_H_

+/* bus mapping constants (used for PCI core initialization) */
+#define PCI_REG_ADDR	0xcf8
+#define PCI_REG_DATA	0xcfc
+
+#define PCI_CFG_EN	0x80000000
+
+#ifndef __ASSEMBLY__
+
 #define DEFINE_PCI_DEVICE_TABLE(_table) \
 	const struct pci_device_id _table[]

@ -49,4 +56,6 @@ void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value);
 void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value);
 void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value);

-#endif
+#endif /* __ASSEMBLY__ */
+
+#endif /* _PCI_I386_H_ */
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@ -39,6 +39,9 @@ ulong board_get_usable_ram_top(ulong total_size);
 void dram_init_banksize(void);
 int default_print_cpuinfo(void);

+/* Set up a UART which can be used with printch(), printhex8(), etc. */
+int setup_early_uart(void);
+
 void setup_pcat_compatibility(void);

 void isa_unmap_rom(u32 addr);
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@ -25,6 +25,7 @@ obj-y	+= string.o
 obj-$(CONFIG_SYS_X86_TSC_TIMER)	+= tsc_timer.o
 obj-$(CONFIG_VIDEO_VGA)	+= video.o
 obj-$(CONFIG_CMD_ZBOOT)	+= zimage.o
+obj-$(CONFIG_HAVE_FSP) += fsp/

 extra-$(CONFIG_USE_PRIVATE_LIBGCC) := lib.a

--- a/arch/x86/lib/cmd_hob.c
+++ b/arch/x86/lib/cmd_hob.c
@ -7,7 +7,7 @@
 #include <common.h>
 #include <command.h>
 #include <linux/compiler.h>
-#include <asm/arch/fsp/fsp_support.h>
+#include <asm/fsp/fsp_support.h>

 DECLARE_GLOBAL_DATA_PTR;

--- a/arch/x86/lib/fsp/Makefile
+++ b/arch/x86/lib/fsp/Makefile
@ -0,0 +1,10 @@
+#
+# Copyright (C) 2015 Google, Inc
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += fsp_car.o
+obj-y += fsp_common.o
+obj-y += fsp_dram.o
+obj-y += fsp_support.o
--- a/arch/x86/cpu/queensbay/tnc_car.S
+++ b/arch/x86/cpu/queensbay/tnc_car.S
--- a/arch/x86/lib/fsp/fsp_common.c
+++ b/arch/x86/lib/fsp/fsp_common.c
@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/post.h>
+#include <asm/processor.h>
+#include <asm/fsp/fsp_support.h>
+
+int print_cpuinfo(void)
+{
+	post_code(POST_CPU_INFO);
+	return default_print_cpuinfo();
+}
+
+void reset_cpu(ulong addr)
+{
+	/* cold reset */
+	outb(0x06, PORT_RESET);
+}
+
+
+int board_pci_post_scan(struct pci_controller *hose)
+{
+	u32 status;
+
+	/* call into FspNotify */
+	debug("Calling into FSP (notify phase INIT_PHASE_PCI): ");
+	status = fsp_notify(NULL, INIT_PHASE_PCI);
+	if (status != FSP_SUCCESS)
+		debug("fail, error code %x\n", status);
+	else
+		debug("OK\n");
+
+	return 0;
+}
+
+void board_final_cleanup(void)
+{
+	u32 status;
+
+	/* call into FspNotify */
+	debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
+	status = fsp_notify(NULL, INIT_PHASE_BOOT);
+	if (status != FSP_SUCCESS)
+		debug("fail, error code %x\n", status);
+	else
+		debug("OK\n");
+
+	return;
+}
--- a/arch/x86/cpu/queensbay/tnc_dram.c
+++ b/arch/x86/cpu/queensbay/tnc_dram.c
@ -5,7 +5,7 @@
 */

 #include <common.h>
-#include <asm/arch/fsp/fsp_support.h>
+#include <asm/fsp/fsp_support.h>
 #include <asm/e820.h>
 #include <asm/post.h>

--- a/arch/x86/cpu/queensbay/fsp_support.c
+++ b/arch/x86/cpu/queensbay/fsp_support.c
@ -6,7 +6,7 @@
 */

 #include <common.h>
-#include <asm/arch/fsp/fsp_support.h>
+#include <asm/fsp/fsp_support.h>
 #include <asm/post.h>

 /**
@ -30,7 +30,7 @@ static bool compare_guid(const struct efi_guid *guid1,
 		return false;
 }

-u32 __attribute__((optimize("O0"))) find_fsp_header(void)
+struct fsp_header *__attribute__((optimize("O0"))) find_fsp_header(void)
 {
 	/*
 	 * This function may be called before the a stack is established,
@ -84,7 +84,7 @@ u32 __attribute__((optimize("O0"))) find_fsp_header(void)
 		fsp = 0;
 	}

-	return (u32)fsp;
+	return (struct fsp_header *)fsp;
 }

 void fsp_continue(struct shared_data *shared_data, u32 status, void *hob_list)
@ -124,25 +124,29 @@ void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf)
 	struct fsp_init_params *params_ptr;
 	struct upd_region *fsp_upd;

-	fsp_hdr = (struct fsp_header *)find_fsp_header();
+#ifdef CONFIG_DEBUG_UART
+	setup_early_uart();
+#endif
+
+	fsp_hdr = find_fsp_header();
 	if (fsp_hdr == NULL) {
 		/* No valid FSP info header was found */
 		panic("Invalid FSP header");
 	}

-	fsp_upd = (struct upd_region *)&shared_data.fsp_upd;
+	fsp_upd = &shared_data.fsp_upd;
 	memset(&rt_buf, 0, sizeof(struct fspinit_rtbuf));

 	/* Reserve a gap in stack top */
 	rt_buf.common.stack_top = (u32 *)stack_top - 32;
 	rt_buf.common.boot_mode = boot_mode;
-	rt_buf.common.upd_data = (struct upd_region *)fsp_upd;
+	rt_buf.common.upd_data = fsp_upd;

 	/* Get VPD region start */
 	fsp_vpd = (struct vpd_region *)(fsp_hdr->img_base +
 			fsp_hdr->cfg_region_off);

-	/* Verifify the VPD data region is valid */
+	/* Verify the VPD data region is valid */
 	assert((fsp_vpd->img_rev == VPD_IMAGE_REV) &&
 	       (fsp_vpd->sign == VPD_IMAGE_ID));

@ -150,7 +154,7 @@ void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf)
 	memcpy(fsp_upd, (void *)(fsp_hdr->img_base + fsp_vpd->upd_offset),
 	       sizeof(struct upd_region));

-	/* Verifify the UPD data region is valid */
+	/* Verify the UPD data region is valid */
 	assert(fsp_upd->terminator == UPD_TERMINATOR);

 	/* Override any UPD setting if required */
--- a/arch/x86/lib/pci_type1.c
+++ b/arch/x86/lib/pci_type1.c
@ -12,6 +12,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <pci.h>
+#include <asm/pci.h>

 #define cfg_read(val, addr, op)		(*val = op((int)(addr)))
 #define cfg_write(val, addr, op)	op((val), (int)(addr))
@ -21,7 +22,7 @@ static int								\
 type1_##rw##_config_##size(struct pci_controller *hose,			\
 			      pci_dev_t dev, int offset, type val)	\
 {									\
-	outl(dev | (offset & 0xfc) | 0x80000000, (int)hose->cfg_addr);	\
+	outl(dev | (offset & 0xfc) | PCI_CFG_EN, (int)hose->cfg_addr);	\
 	cfg_##rw(val, hose->cfg_data + (offset & mask), op);		\
 	return 0;							\
 }
@ -34,10 +35,6 @@ TYPE1_PCI_OP(write, byte, u8, outb, 3)
 TYPE1_PCI_OP(write, word, u16, outw, 2)
 TYPE1_PCI_OP(write, dword, u32, outl, 0)

-/* bus mapping constants (used for PCI core initialization) */
-#define PCI_REG_ADDR		0x00000cf8
-#define PCI_REG_DATA		0x00000cfc
-
 void pci_setup_type1(struct pci_controller *hose)
 {
 	pci_set_ops(hose,
--- a/board/google/chromebook_link/Kconfig
+++ b/board/google/chromebook_link/Kconfig
@ -22,8 +22,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select MARK_GRAPHICS_MEM_WRCOMB
 	select BOARD_ROMSIZE_KB_8192

-config MMCONF_BASE_ADDRESS
-	hex
+config PCIE_ECAM_BASE
 	default 0xf0000000

 config EARLY_POST_CROS_EC
--- a/board/intel/galileo/Kconfig
+++ b/board/intel/galileo/Kconfig
@ -0,0 +1,21 @@
+if TARGET_GALILEO
+
+config SYS_BOARD
+	default "galileo"
+
+config SYS_VENDOR
+	default "intel"
+
+config SYS_SOC
+	default "quark"
+
+config SYS_CONFIG_NAME
+	default "galileo"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select X86_RESET_VECTOR
+	select INTEL_QUARK
+	select BOARD_ROMSIZE_KB_1024
+
+endif
--- a/board/intel/galileo/MAINTAINERS
+++ b/board/intel/galileo/MAINTAINERS
@ -0,0 +1,6 @@
+INTEL GALILEO BOARD
+M:	Bin Meng <bmeng.cn@gmail.com>
+S:	Maintained
+F:	board/intel/galileo/
+F:	include/configs/galileo.h
+F:	configs/galileo_defconfig
--- a/board/intel/galileo/Makefile
+++ b/board/intel/galileo/Makefile
@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= galileo.o start.o
--- a/board/intel/galileo/galileo.c
+++ b/board/intel/galileo/galileo.c
@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	return 0;
+}
+
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
+{
+	return;
+}
--- a/board/intel/galileo/start.S
+++ b/board/intel/galileo/start.S
@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+	jmp	early_board_init_ret
--- a/board/intel/minnowmax/Kconfig
+++ b/board/intel/minnowmax/Kconfig
@ -0,0 +1,24 @@
+if TARGET_MINNOWMAX
+
+config SYS_BOARD
+	default "minnowmax"
+
+config SYS_VENDOR
+	default "intel"
+
+config SYS_SOC
+	default "baytrail"
+
+config SYS_CONFIG_NAME
+	default "minnowmax"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select X86_RESET_VECTOR
+	select INTEL_BAYTRAIL
+	select BOARD_ROMSIZE_KB_8192
+
+config PCIE_ECAM_BASE
+	default 0xe0000000
+
+endif
--- a/board/intel/minnowmax/MAINTAINERS
+++ b/board/intel/minnowmax/MAINTAINERS
@ -0,0 +1,6 @@
+CircuitCo Minnowboard Max
+M:	Simon Glass <sjg@chromium.org>
+S:	Maintained
+F:	board/intel/minnowmax
+F:	include/configs/minnowmax.h
+F:	configs/minnowmax_defconfig
--- a/board/intel/minnowmax/Makefile
+++ b/board/intel/minnowmax/Makefile
@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015, Google, Inc
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= minnowmax.o start.o
--- a/board/intel/minnowmax/minnowmax.c
+++ b/board/intel/minnowmax/minnowmax.c
@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2015, Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ibmpc.h>
+#include <asm/pnp_def.h>
+#include <netdev.h>
+#include <smsc_lpc47m.h>
+
+#define SERIAL_DEV PNP_DEV(0x2e, 4)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	lpc47m_enable_serial(SERIAL_DEV, UART0_BASE);
+
+	return 0;
+}
+
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
+{
+	return;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
--- a/board/intel/minnowmax/start.S
+++ b/board/intel/minnowmax/start.S
@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2015, Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+	jmp	early_board_init_ret
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@ -217,8 +217,10 @@ void scsi_init(void)
 		       (busdevfunc >> 8) & 0x7);
 	}
 #endif
+	bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci");
 	scsi_low_level_init(busdevfunc);
 	scsi_scan(1);
+	bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI);
 }
 #endif

--- a/configs/galileo_defconfig
+++ b/configs/galileo_defconfig
@ -0,0 +1,6 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff10000"
+CONFIG_X86=y
+CONFIG_TARGET_GALILEO=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
+CONFIG_DEFAULT_DEVICE_TREE="galileo"
--- a/configs/minnowmax_defconfig
+++ b/configs/minnowmax_defconfig
@ -0,0 +1,13 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000"
+CONFIG_X86=y
+CONFIG_TARGET_MINNOWMAX=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
+CONFIG_DEFAULT_DEVICE_TREE="minnowmax"
+CONFIG_VIDEO_X86=y
+CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
+CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
+CONFIG_DEBUG_UART_NS16550=y
+CONFIG_DEBUG_UART=y
+CONFIG_MMCONF_BASE_ADDRESS=0xe0000000
+CONFIG_HAVE_INTEL_ME=y
--- a/doc/README.x86
+++ b/doc/README.x86
@ -18,11 +18,11 @@ U-Boot supports running as a coreboot [1] payload on x86. So far only Link
 on other x86 boards since coreboot deals with most of the low-level details.

 U-Boot also supports booting directly from x86 reset vector without coreboot,
-aka raw support or bare support. Currently Link and Intel Crown Bay board
-support running U-Boot 'bare metal'.
+aka raw support or bare support. Currently Link, Intel Crown Bay, Intel
+Minnowboard Max and Intel Galileo support running U-Boot 'bare metal'.

-As for loading OS, U-Boot supports directly booting a 32-bit or 64-bit Linux
-kernel as part of a FIT image. It also supports a compressed zImage.
+As for loading an OS, U-Boot supports directly booting a 32-bit or 64-bit
+Linux kernel as part of a FIT image. It also supports a compressed zImage.

 Build Instructions
 ------------------
@ -47,13 +47,15 @@ Change the 'Board configuration file' and 'Board Device Tree Source (dts) file'
 to point to a new board. You can also change the Cache-As-RAM (CAR) related
 settings here if the default values do not fit your new board.

-Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
+Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
 little bit tricky, as generally it requires several binary blobs which are not
 shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is
 not turned on by default in the U-Boot source tree. Firstly, you need turn it
-on by uncommenting the following line in the main U-Boot Makefile:
+on by enabling the ROM build:

-# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+$ export BUILD_ROM=y
+
+This tells the Makefile to build u-boot.rom as a target.

 Link-specific instructions:

@ -108,6 +110,50 @@ Now you can build U-Boot and obtain u-boot.rom
 $ make crownbay_defconfig
 $ make all

+Intel Minnowboard Max instructions:
+
+This uses as FSP as with Crown Bay, except it is for the Atom E3800 series.
+Download this and get the .fd file (BAYTRAIL_FSP_GOLD_003_16-SEP-2014.fd at
+the time of writing). Put it in the board directory:
+board/intel/minnowmax/fsp.bin
+
+Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
+directory: board/intel/minnowmax/vga.bin
+
+You still need two more binary blobs. These come from the sample SPI image
+provided in the FSP (SPI.bin at the time of writing).
+
+Use ifdtool in the U-Boot tools directory to extract the images from that
+file, for example:
+
+   $ ./tools/ifdtool -x BayleyBay/SPI.bin
+   $ cp flashregion_2_intel_me.bin board/intel/minnowmax/me.bin
+   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
+
+Now you can build U-Boot and obtain u-boot.rom
+
+$ make minnowmax_defconfig
+$ make all
+
+Intel Galileo instructions:
+
+Only one binary blob is needed for Remote Management Unit (RMU) within Intel
+Quark SoC. Not like FSP, U-Boot does not call into the binary. The binary is
+needed by the Quark SoC itself.
+
+You can get the binary blob from Quark Board Support Package from Intel website:
+
+* ./QuarkSocPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin
+
+Rename the file and put it to the board directory by:
+
+   $ cp RMU.bin board/intel/galileo/rmu.bin
+
+Now you can build U-Boot and obtain u-boot.rom
+
+$ make galileo_defconfig
+$ make all
+
 Test with coreboot
 ------------------
 For testing U-Boot as the coreboot payload, there are things that need be paid
@ -126,11 +172,21 @@ Make sure 0x1110000 matches CONFIG_SYS_TEXT_BASE and 0x1110015 matches the
 symbol address of _start (in arch/x86/cpu/start.S).

 If you want to use ELF as the coreboot payload, change U-Boot configuration to
-use CONFIG_OF_EMBED.
+use CONFIG_OF_EMBED instead of CONFIG_OF_SEPARATE.
+
+To enable video you must enable these options in coreboot:
+
+   - Set framebuffer graphics resolution (1280x1024 32k-color (1:5:5))
+   - Keep VESA framebuffer
+
+At present it seems that for Minnowboard Max, coreboot does not pass through
+the video information correctly (it always says the resolution is 0x0). This
+works correctly for link though.
+

 CPU Microcode
 -------------
-Modern CPU usually requires a special bit stream called microcode [5] to be
+Modern CPUs usually require a special bit stream called microcode [5] to be
 loaded on the processor after power up in order to function properly. U-Boot
 has already integrated these as hex dumps in the source tree.

@ -162,6 +218,69 @@ mtrr - List and set the Memory Type Range Registers (MTRR). These are used to
 	 mode to use. U-Boot sets up some reasonable values but you can
 	 adjust then with this command.

+Development Flow
+----------------
+These notes are for those who want to port U-Boot to a new x86 platform.
+
+Since x86 CPUs boot from SPI flash, a SPI flash emulator is a good investment.
+The Dediprog em100 can be used on Linux. The em100 tool is available here:
+
+   http://review.coreboot.org/p/em100.git
+
+On Minnowboard Max the following command line can be used:
+
+   sudo em100 -s -p LOW -d u-boot.rom -c W25Q64DW -r
+
+A suitable clip for connecting over the SPI flash chip is here:
+
+   http://www.dediprog.com/pd/programmer-accessories/EM-TC-8
+
+This allows you to override the SPI flash contents for development purposes.
+Typically you can write to the em100 in around 1200ms, considerably faster
+than programming the real flash device each time. The only important
+limitation of the em100 is that it only supports SPI bus speeds up to 20MHz.
+This means that images must be set to boot with that speed. This is an
+Intel-specific feature - e.g. tools/ifttool has an option to set the SPI
+speed in the SPI descriptor region.
+
+If your chip/board uses an Intel Firmware Support Package (FSP) it is fairly
+easy to fit it in. You can follow the Minnowboard Max implementation, for
+example. Hopefully you will just need to create new files similar to those
+in arch/x86/cpu/baytrail which provide Bay Trail support.
+
+If you are not using an FSP you have more freedom and more responsibility.
+The ivybridge support works this way, although it still uses a ROM for
+graphics and still has binary blobs containing Intel code. You should aim to
+support all important peripherals on your platform including video and storage.
+Use the device tree for configuration where possible.
+
+For the microcode you can create a suitable device tree file using the
+microcode tool:
+
+  ./tools/microcode-tool -d microcode.dat create <model>
+
+or if you only have header files and not the full Intel microcode.dat database:
+
+  ./tools/microcode-tool -H BAY_TRAIL_FSP_KIT/Microcode/M0130673322.h \
+	-H BAY_TRAIL_FSP_KIT/Microcode/M0130679901.h \
+	create all
+
+These are written to arch/x86/dts/microcode/ by default.
+
+Note that it is possible to just add the micrcode for your CPU if you know its
+model. U-Boot prints this information when it starts
+
+   CPU: x86_64, vendor Intel, device 30673h
+
+so here we can use the M0130673322 file.
+
+If you platform can display POST codes on two little 7-segment displays on
+the board, then you can use post_code() calls from C or assembler to monitor
+boot progress. This can be good for debugging.
+
+If not, you can try to get serial working as early as possible. The early
+debug serial port may be useful here. See setup_early_uart() for an example.
+
 TODO List
 ---------
 - Audio
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@ -24,6 +24,7 @@ obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o
 obj-$(CONFIG_MXC_MMC) += mxcmmc.o
 obj-$(CONFIG_MXS_MMC) += mxsmmc.o
 obj-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
+obj-$(CONFIG_X86) += pci_mmc.o
 obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
 obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
 obj-$(CONFIG_S3C_SDI) += s3c_sdi.o
--- a/drivers/mmc/pci_mmc.c
+++ b/drivers/mmc/pci_mmc.c
@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2015, Google, Inc
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <sdhci.h>
+#include <asm/pci.h>
+
+int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported,
+		 int num_ids)
+{
+	struct sdhci_host *mmc_host;
+	pci_dev_t devbusfn;
+	u32 iobase;
+	int ret;
+	int i;
+
+	for (i = 0; i < num_ids; i++) {
+		devbusfn = pci_find_devices(mmc_supported, i);
+		if (devbusfn == -1)
+			return -ENODEV;
+
+		mmc_host = malloc(sizeof(struct sdhci_host));
+		if (!mmc_host)
+			return -ENOMEM;
+
+		mmc_host->name = (char *)name;
+		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &iobase);
+		mmc_host->ioaddr = (void *)iobase;
+		mmc_host->quirks = 0;
+		ret = add_sdhci(mmc_host, 0, 0);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@ -15,6 +15,7 @@
 #include <common.h>

 #include <command.h>
+#include <errno.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <pci.h>
@ -236,6 +237,48 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
 	return -1;
 }

+pci_dev_t pci_find_class(uint find_class, int index)
+{
+	int bus;
+	int devnum;
+	pci_dev_t bdf;
+	uint32_t class;
+
+	for (bus = 0; bus <= pci_last_busno(); bus++) {
+		for (devnum = 0; devnum < PCI_MAX_PCI_DEVICES - 1; devnum++) {
+			pci_read_config_dword(PCI_BDF(bus, devnum, 0),
+					      PCI_CLASS_REVISION, &class);
+			if (class >> 16 == 0xffff)
+				continue;
+
+			for (bdf = PCI_BDF(bus, devnum, 0);
+					bdf <= PCI_BDF(bus, devnum,
+						PCI_MAX_PCI_FUNCTIONS - 1);
+					bdf += PCI_BDF(0, 0, 1)) {
+				pci_read_config_dword(bdf, PCI_CLASS_REVISION,
+						      &class);
+				class >>= 8;
+
+				if (class != find_class)
+					continue;
+				/*
+				 * Decrement the index. We want to return the
+				 * correct device, so index is 0 for the first
+				 * matching device, 1 for the second, etc.
+				 */
+				if (index) {
+					index--;
+					continue;
+				}
+				/* Return index'th controller. */
+				return bdf;
+			}
+		}
+	}
+
+	return -ENODEV;
+}
+
 pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index)
 {
 	struct pci_device_id ids[2] = { {}, {0, 0} };
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@ -228,11 +228,12 @@ int vbe_get_video_info(struct graphic_device *gdev)
 #endif
 }

-int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate)
+int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), int exec_method)
 {
 	struct pci_rom_header *rom, *ram;
 	int vesa_mode = -1;
 	uint16_t class;
+	bool emulate;
 	int ret;

 	/* Only execute VGA ROMs */
@ -262,6 +263,29 @@ int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate)
 	vesa_mode = CONFIG_FRAMEBUFFER_VESA_MODE;
 #endif
 	debug("Selected vesa mode %#x\n", vesa_mode);
+
+	if (exec_method & PCI_ROM_USE_NATIVE) {
+#ifdef CONFIG_X86
+		emulate = false;
+#else
+		if (!(exec_method & PCI_ROM_ALLOW_FALLBACK)) {
+			printf("BIOS native execution is only available on x86\n");
+			return -ENOSYS;
+		}
+		emulate = true;
+#endif
+	} else {
+#ifdef CONFIG_BIOSEMU
+		emulate = true;
+#else
+		if (!(exec_method & PCI_ROM_ALLOW_FALLBACK)) {
+			printf("BIOS emulation not available - see CONFIG_BIOSEMU\n");
+			return -ENOSYS;
+		}
+		emulate = false;
+#endif
+	}
+
 	if (emulate) {
 #ifdef CONFIG_BIOSEMU
 		BE_VGAInfo *info;
@ -274,9 +298,6 @@ int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate)
 				  vesa_mode, &mode_info);
 		if (ret)
 			return ret;
-#else
-		printf("BIOS emulation not available - see CONFIG_BIOSEMU\n");
-		return -ENOSYS;
 #endif
 	} else {
 #ifdef CONFIG_X86
@ -284,9 +305,6 @@ int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate)

 		bios_run_on_x86(dev, (unsigned long)ram, vesa_mode,
 				&mode_info);
-#else
-		printf("BIOS native execution is only available on x86\n");
-		return -ENOSYS;
 #endif
 	}
 	debug("Final vesa mode %#x\n", mode_info.video_mode);
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@ -7,6 +7,7 @@
 */

 #include <common.h>
+#include <errno.h>
 #include <malloc.h>
 #include <spi.h>
 #include <pci.h>
@ -21,6 +22,7 @@
 struct ich_ctlr {
 	pci_dev_t dev;		/* PCI device number */
 	int ich_version;	/* Controller version, 7 or 9 */
+	bool use_sbase;		/* Use SBASE instead of RCB */
 	int ichspi_lock;
 	int locked;
 	uint8_t *opmenu;
@ -145,7 +147,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	 * ICH 7 SPI controller only supports array read command
 	 * and byte program command for SST flash
 	 */
-	if (ctlr.ich_version == 7) {
+	if (ctlr.ich_version == 7 || ctlr.use_sbase) {
 		ich->slave.op_mode_rx = SPI_OPM_RX_AS;
 		ich->slave.op_mode_tx = SPI_OPM_TX_BP;
 	}
@ -175,13 +177,15 @@ void spi_free_slave(struct spi_slave *slave)
 static int get_ich_version(uint16_t device_id)
 {
 	if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC ||
-	    device_id == PCI_DEVICE_ID_INTEL_ITC_LPC)
+	    device_id == PCI_DEVICE_ID_INTEL_ITC_LPC ||
+	    device_id == PCI_DEVICE_ID_INTEL_QRK_ILB)
 		return 7;

 	if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
 	     device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) ||
 	    (device_id >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN &&
-	     device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX))
+	     device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX) ||
+	    device_id == PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC)
 		return 9;

 	return 0;
@ -204,14 +208,14 @@ static int ich9_can_do_33mhz(pci_dev_t dev)
 	return speed == 1;
 }

-static int ich_find_spi_controller(pci_dev_t *devp, int *ich_versionp)
+static int ich_find_spi_controller(struct ich_ctlr *ich)
 {
 	int last_bus = pci_last_busno();
 	int bus;

 	if (last_bus == -1) {
 		debug("No PCI busses?\n");
-		return -1;
+		return -ENODEV;
 	}

 	for (bus = 0; bus <= last_bus; bus++) {
@ -225,24 +229,33 @@ static int ich_find_spi_controller(pci_dev_t *devp, int *ich_versionp)
 		device_id = ids >> 16;

 		if (vendor_id == PCI_VENDOR_ID_INTEL) {
-			*devp = dev;
-			*ich_versionp = get_ich_version(device_id);
-			return 0;
+			ich->dev = dev;
+			ich->ich_version = get_ich_version(device_id);
+			if (device_id == PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC)
+				ich->use_sbase = true;
+			return ich->ich_version == 0 ? -ENODEV : 0;
 		}
 	}

 	debug("ICH SPI: No ICH found.\n");
-	return -1;
+	return -ENODEV;
 }

 static int ich_init_controller(struct ich_ctlr *ctlr)
 {
 	uint8_t *rcrb; /* Root Complex Register Block */
 	uint32_t rcba; /* Root Complex Base Address */
+	uint32_t sbase_addr;
+	uint8_t *sbase;

 	pci_read_config_dword(ctlr->dev, 0xf0, &rcba);
 	/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */
 	rcrb = (uint8_t *)(rcba & 0xffffc000);
+
+	/* SBASE is similar */
+	pci_read_config_dword(ctlr->dev, 0x54, &sbase_addr);
+	sbase = (uint8_t *)(sbase_addr & 0xfffffe00);
+
 	if (ctlr->ich_version == 7) {
 		struct ich7_spi_regs *ich7_spi;

@ -262,7 +275,10 @@ static int ich_init_controller(struct ich_ctlr *ctlr)
 	} else if (ctlr->ich_version == 9) {
 		struct ich9_spi_regs *ich9_spi;

-		ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800);
+		if (ctlr->use_sbase)
+			ich9_spi = (struct ich9_spi_regs *)sbase;
+		else
+			ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800);
 		ctlr->ichspi_lock = ich_readw(&ich9_spi->hsfs) & HSFS_FLOCKDN;
 		ctlr->opmenu = ich9_spi->opmenu;
 		ctlr->menubytes = sizeof(ich9_spi->opmenu);
@ -282,12 +298,13 @@ static int ich_init_controller(struct ich_ctlr *ctlr)
 		      ctlr->ich_version);
 		return -1;
 	}
-	debug("ICH SPI: Version %d detected\n", ctlr->ich_version);

 	/* Work out the maximum speed we can support */
 	ctlr->max_speed = 20000000;
 	if (ctlr->ich_version == 9 && ich9_can_do_33mhz(ctlr->dev))
 		ctlr->max_speed = 33000000;
+	debug("ICH SPI: Version %d detected at %p, speed %ld\n",
+	      ctlr->ich_version, ctlr->base, ctlr->max_speed);

 	ich_set_bbar(ctlr, 0);

@ -298,7 +315,7 @@ void spi_init(void)
 {
 	uint8_t bios_cntl;

-	if (ich_find_spi_controller(&ctlr.dev, &ctlr.ich_version)) {
+	if (ich_find_spi_controller(&ctlr)) {
 		printf("ICH SPI: Cannot find device\n");
 		return;
 	}
@ -312,10 +329,20 @@ void spi_init(void)
 	 * Disable the BIOS write protect so write commands are allowed.  On
 	 * v9, deassert SMM BIOS Write Protect Disable.
 	 */
-	pci_read_config_byte(ctlr.dev, 0xdc, &bios_cntl);
-	if (ctlr.ich_version == 9)
-		bios_cntl &= ~(1 << 5);
-	pci_write_config_byte(ctlr.dev, 0xdc, bios_cntl | 0x1);
+	if (ctlr.use_sbase) {
+		struct ich9_spi_regs *ich9_spi;
+
+		ich9_spi = (struct ich9_spi_regs *)ctlr.base;
+		bios_cntl = ich_readb(&ich9_spi->bcr);
+		bios_cntl &= ~(1 << 5);	/* clear Enable InSMM_STS (EISS) */
+		bios_cntl |= 1;		/* Write Protect Disable (WPD) */
+		ich_writeb(bios_cntl, &ich9_spi->bcr);
+	} else {
+		pci_read_config_byte(ctlr.dev, 0xdc, &bios_cntl);
+		if (ctlr.ich_version == 9)
+			bios_cntl &= ~(1 << 5);
+		pci_write_config_byte(ctlr.dev, 0xdc, bios_cntl | 0x1);
+	}
 }

 int spi_claim_bus(struct spi_slave *slave)
--- a/drivers/spi/ich.h
+++ b/drivers/spi/ich.h
@ -37,18 +37,19 @@ struct ich9_spi_regs {
 	uint8_t opmenu[8];		/* 0x98 */
 	uint32_t bbar;
 	uint8_t _reserved3[12];
-	uint32_t fdoc;
+	uint32_t fdoc;			/* 0xb0 */
 	uint32_t fdod;
 	uint8_t _reserved4[8];
-	uint32_t afc;
+	uint32_t afc;			/* 0xc0 */
 	uint32_t lvscc;
 	uint32_t uvscc;
 	uint8_t _reserved5[4];
-	uint32_t fpb;
+	uint32_t fpb;			/* 0xd0 */
 	uint8_t _reserved6[28];
-	uint32_t srdl;
+	uint32_t srdl;			/* 0xf0 */
 	uint32_t srdc;
-	uint32_t srd;
+	uint32_t scs;
+	uint32_t bcr;
 } __packed;

 enum {
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@ -47,6 +47,7 @@ obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
 obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o
 obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
 obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
+obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o

 # designware
 obj-$(CONFIG_USB_DWC2) += dwc2.o
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@ -34,57 +34,6 @@ static struct pci_device_id ehci_pci_ids[] = {
 	{0, 0}
 };
 #else
-static pci_dev_t ehci_find_class(int index)
-{
-	int bus;
-	int devnum;
-	pci_dev_t bdf;
-	uint32_t class;
-
-	for (bus = 0; bus <= pci_last_busno(); bus++) {
-		for (devnum = 0; devnum < PCI_MAX_PCI_DEVICES-1; devnum++) {
-			pci_read_config_dword(PCI_BDF(bus, devnum, 0),
-					      PCI_CLASS_REVISION, &class);
-			if (class >> 16 == 0xffff)
-				continue;
-
-			for (bdf = PCI_BDF(bus, devnum, 0);
-					bdf <= PCI_BDF(bus, devnum,
-						PCI_MAX_PCI_FUNCTIONS - 1);
-					bdf += PCI_BDF(0, 0, 1)) {
-				pci_read_config_dword(bdf, PCI_CLASS_REVISION,
-						      &class);
-				class >>= 8;
-				/*
-				 * Here be dragons! In case we have multiple
-				 * PCI EHCI controllers, this function will
-				 * be called multiple times as well. This
-				 * function will scan the PCI busses, always
-				 * starting from bus 0, device 0, function 0,
-				 * until it finds an USB controller. The USB
-				 * stack gives us an 'index' of a controller
-				 * that is currently being registered, which
-				 * is a number, starting from 0 and growing
-				 * in ascending order as controllers are added.
-				 * To avoid probing the same controller in tne
-				 * subsequent runs of this function, we will
-				 * skip 'index - 1' detected controllers and
-				 * report the index'th controller.
-				 */
-				if (class != PCI_CLASS_SERIAL_USB_EHCI)
-					continue;
-				if (index) {
-					index--;
-					continue;
-				}
-				/* Return index'th controller. */
-				return bdf;
-			}
-		}
-	}
-
-	return -ENODEV;
-}
 #endif

 /*
@ -102,7 +51,7 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 #ifdef CONFIG_PCI_EHCI_DEVICE
 	pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
 #else
-	pdev = ehci_find_class(index);
+	pdev = pci_find_class(PCI_CLASS_SERIAL_USB_EHCI, index);
 #endif
 	if (pdev < 0) {
 		printf("EHCI host controller not found\n");
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2015, Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <pci.h>
+#include <usb.h>
+
+#include "xhci.h"
+
+/*
+ * Create the appropriate control structures to manage a new XHCI host
+ * controller.
+ */
+int xhci_hcd_init(int index, struct xhci_hccr **ret_hccr,
+		  struct xhci_hcor **ret_hcor)
+{
+	struct xhci_hccr *hccr;
+	struct xhci_hcor *hcor;
+	pci_dev_t pdev;
+	uint32_t cmd;
+	int len;
+
+	pdev = pci_find_class(PCI_CLASS_SERIAL_USB_XHCI, index);
+	if (pdev < 0) {
+		printf("XHCI host controller not found\n");
+		return -1;
+	}
+
+	hccr = (struct xhci_hccr *)pci_map_bar(pdev,
+			PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
+	len = HC_LENGTH(xhci_readl(&hccr->cr_capbase));
+	hcor = (struct xhci_hcor *)((uint32_t)hccr + len);
+
+	debug("XHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
+	      (uint32_t)hccr, (uint32_t)hcor, len);
+
+	*ret_hccr = hccr;
+	*ret_hcor = hcor;
+
+	/* enable busmaster */
+	pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MASTER;
+	pci_write_config_dword(pdev, PCI_COMMAND, cmd);
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding * to the XHCI host
+ * controller
+ */
+void xhci_hcd_stop(int index)
+{
+}
--- a/drivers/video/vesa_fb.c
+++ b/drivers/video/vesa_fb.c
@ -23,6 +23,7 @@ struct pci_device_id vesa_video_ids[] = {
 	{ .vendor = 0x1002, .device = 0x5159 },
 	{ .vendor = 0x1002, .device = 0x4752 },
 	{ .vendor = 0x1002, .device = 0x5452 },
+	{ .vendor = 0x8086, .device = 0x0f31 },
 	{},
 };

@ -41,8 +42,10 @@ void *video_hw_init(void)
 			printf("no card detected\n");
 			return NULL;
 		}
-		printf("bdf %x\n", dev);
-		ret = pci_run_vga_bios(dev, NULL, true);
+		bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
+		ret = pci_run_vga_bios(dev, NULL, PCI_ROM_USE_NATIVE |
+				       PCI_ROM_ALLOW_FALLBACK);
+		bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
 		if (ret) {
 			printf("failed to run video BIOS: %d\n", ret);
 			return NULL;
@ -58,7 +61,7 @@ void *video_hw_init(void)
 	sprintf(gdev->modeIdent, "%dx%dx%d", gdev->winSizeX, gdev->winSizeY,
 		bits_per_pixel);
 	printf("%s\n", gdev->modeIdent);
-	debug("Framex buffer at %x\n", gdev->pciBase);
+	debug("Frame buffer at %x\n", gdev->pciBase);

 	return (void *)gdev;
 }
--- a/include/bootstage.h
+++ b/include/bootstage.h
@ -86,9 +86,9 @@ enum bootstage_id {
 	BOOTSTAGE_ID_POST_FAIL_R,	/* Post failure reported after reloc */

 	/*
-	 * This set is reported ony by x86, and the meaning is different. In
+	 * This set is reported only by x86, and the meaning is different. In
 	 * this case we are reporting completion of a particular stage.
-	 * This should probably change in he x86 code (which doesn't report
+	 * This should probably change in the x86 code (which doesn't report
 	 * errors in any case), but discussion this can perhaps wait until we
 	 * have a generic board implementation.
 	 */
@ -194,6 +194,7 @@ enum bootstage_id {
 	BOOTSTAGE_ID_MAIN_CPU_READY,

 	BOOTSTAGE_ID_ACCUM_LCD,
+	BOOTSTAGE_ID_ACCUM_SCSI,

 	/* a few spare for the user, from here */
 	BOOTSTAGE_ID_USER,
--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_X86_SERIAL
+
+/* ns16550 UART is memory-mapped in Quark SoC */
+#undef  CONFIG_SYS_NS16550_PORT_MAPPED
+
+#define CONFIG_PCI_MEM_BUS		0x90000000
+#define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE		0x20000000
+
+#define CONFIG_PCI_PREF_BUS		0xb0000000
+#define CONFIG_PCI_PREF_PHYS		CONFIG_PCI_PREF_BUS
+#define CONFIG_PCI_PREF_SIZE		0x20000000
+
+#define CONFIG_PCI_IO_BUS		0x2000
+#define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE		0xe000
+
+#define CONFIG_SYS_EARLY_PCI_INIT
+#define CONFIG_PCI_PNP
+
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial\0" \
+					"stdout=serial\0" \
+					"stderr=serial\0"
+
+/* SATA is not supported in Quark SoC */
+#undef CONFIG_SCSI_AHCI
+#undef CONFIG_CMD_SCSI
+
+/* Video is not supported in Quark SoC */
+#undef CONFIG_VIDEO
+#undef CONFIG_CFB_CONSOLE
+
+/* SD/MMC support */
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SDMA
+#define CONFIG_CMD_MMC
+
+#endif	/* __CONFIG_H */
--- a/include/configs/minnowmax.h
+++ b/include/configs/minnowmax.h
@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_X86_SERIAL
+#define CONFIG_SMSC_LPC47M
+
+#define CONFIG_PCI_MEM_BUS		0xd0000000
+#define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE		0x10000000
+
+#define CONFIG_PCI_PREF_BUS		0xc0000000
+#define CONFIG_PCI_PREF_PHYS		CONFIG_PCI_PREF_BUS
+#define CONFIG_PCI_PREF_SIZE		0x10000000
+
+#define CONFIG_PCI_IO_BUS		0x2000
+#define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE		0xe000
+
+#define CONFIG_SYS_EARLY_PCI_INIT
+#define CONFIG_PCI_PNP
+#define CONFIG_RTL8169
+#define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,serial\0" \
+					"stdout=vga,serial\0" \
+					"stderr=vga,serial\0"
+
+#define CONFIG_SCSI_DEV_LIST            \
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}
+#define CONFIG_SPI_FLASH_SST
+
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SDMA
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
+
+#define CONFIG_X86_OPTION_ROM_FILE		vga.bin
+#define CONFIG_X86_OPTION_ROM_ADDR		0xfff90000
+
+#ifndef CONFIG_SYS_COREBOOT
+#define CONFIG_VIDEO_VESA
+#endif
+#define VIDEO_IO_OFFSET				0
+#define CONFIG_X86EMU_RAW_IO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#define CONFIG_FIT_SIGNATURE
+#define CONFIG_RSA
+
+/* Avoid a warning in the Realtek Ethernet driver */
+#define CONFIG_SYS_CACHELINE_SIZE 16
+
+#endif	/* __CONFIG_H */
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@ -39,7 +39,6 @@
 /* SATA AHCI storage */

 #define CONFIG_SCSI_AHCI
-#define CONFIG_SATA_INTEL
 #ifdef CONFIG_SCSI_AHCI
 #define CONFIG_LIBATA
 #define CONFIG_SYS_64BIT_LBA
@ -245,6 +244,9 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

+#define CONFIG_BOOTSTAGE
+#define CONFIG_CMD_BOOTSTAGE
+
 #define CONFIG_CMD_USB

 #define CONFIG_EXTRA_ENV_SETTINGS \
--- a/include/dt-bindings/mrc/quark.h
+++ b/include/dt-bindings/mrc/quark.h
@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Intel Quark MRC bindings include several properties
+ * as part of an Intel Quark MRC node. In most cases,
+ * the value of these properties uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_QRK_MRC_H_
+#define _DT_BINDINGS_QRK_MRC_H_
+
+/* MRC platform data flags */
+#define MRC_FLAG_ECC_EN		0x00000001
+#define MRC_FLAG_SCRAMBLE_EN	0x00000002
+#define MRC_FLAG_MEMTEST_EN	0x00000004
+/* 0b DDR "fly-by" topology else 1b DDR "tree" topology */
+#define MRC_FLAG_TOP_TREE_EN	0x00000008
+/* If set ODR signal is asserted to DRAM devices on writes */
+#define MRC_FLAG_WR_ODT_EN	0x00000010
+
+/* DRAM width */
+#define DRAM_WIDTH_X8		0
+#define DRAM_WIDTH_X16		1
+#define DRAM_WIDTH_X32		2
+
+/* DRAM speed */
+#define DRAM_FREQ_800		0
+#define DRAM_FREQ_1066		1
+
+/* DRAM type */
+#define DRAM_TYPE_DDR3		0
+#define DRAM_TYPE_DDR3L		1
+
+/* DRAM rank mask */
+#define DRAM_RANK(n)		(1 << (n))
+
+/* DRAM channel mask */
+#define DRAM_CHANNEL(n)		(1 << (n))
+
+/* DRAM channel width */
+#define DRAM_CHANNEL_WIDTH_X8	0
+#define DRAM_CHANNEL_WIDTH_X16	1
+#define DRAM_CHANNEL_WIDTH_X32	2
+
+/* DRAM address mode */
+#define DRAM_ADDR_MODE0		0
+#define DRAM_ADDR_MODE1		1
+#define DRAM_ADDR_MODE2		2
+
+/* DRAM refresh rate */
+#define DRAM_REFRESH_RATE_195US	1
+#define DRAM_REFRESH_RATE_39US	2
+#define DRAM_REFRESH_RATE_785US	3
+
+/* DRAM SR temprature range */
+#define DRAM_SRT_RANGE_NORMAL	0
+#define DRAM_SRT_RANGE_EXTENDED	1
+
+/* DRAM ron value */
+#define DRAM_RON_34OHM		0
+#define DRAM_RON_40OHM		1
+
+/* DRAM rtt nom value */
+#define DRAM_RTT_NOM_40OHM	0
+#define DRAM_RTT_NOM_60OHM	1
+#define DRAM_RTT_NOM_120OHM	2
+
+/* DRAM rd odt value */
+#define DRAM_RD_ODT_OFF		0
+#define DRAM_RD_ODT_60OHM	1
+#define DRAM_RD_ODT_120OHM	2
+#define DRAM_RD_ODT_180OHM	3
+
+/* DRAM density */
+#define DRAM_DENSITY_512M	0
+#define DRAM_DENSITY_1G		1
+#define DRAM_DENSITY_2G		2
+#define DRAM_DENSITY_4G		3
+
+#endif /* _DT_BINDINGS_QRK_MRC_H_ */
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@ -167,6 +167,7 @@ enum fdt_compat_id {
 	COMPAT_INTEL_GMA,		/* Intel Graphics Media Accelerator */
 	COMPAT_AMS_AS3722,		/* AMS AS3722 PMIC */
 	COMPAT_INTEL_ICH_SPI,		/* Intel ICH7/9 SPI controller */
+	COMPAT_INTEL_QRK_MRC,		/* Intel Quark MRC */

 	COMPAT_COUNT,
 };
--- a/include/mmc.h
+++ b/include/mmc.h
@ -438,6 +438,20 @@ int board_mmc_init(bd_t *bis);
 int cpu_mmc_init(bd_t *bis);
 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);

+struct pci_device_id;
+
+/**
+ * pci_mmc_init() - set up PCI MMC devices
+ *
+ * This finds all the matching PCI IDs and sets them up as MMC devices.
+ *
+ * @name:		Name to use for devices
+ * @mmc_supported:	PCI IDs to search for
+ * @num_ids:		Number of elements in @mmc_supported
+ */
+int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported,
+		 int num_ids);
+
 /* Set block count limit because of 16 bit register limit on some hardware*/
 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
--- a/include/pci.h
+++ b/include/pci.h
@ -644,8 +644,7 @@ extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);

 extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index);
 extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index);
-extern pci_dev_t pci_find_class(int wanted_class, int wanted_sub_code,
-				int wanted_prog_if, int index);
+pci_dev_t pci_find_class(unsigned int find_class, int index);

 extern int pci_hose_config_device(struct pci_controller *hose,
 				  pci_dev_t dev,
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@ -1346,6 +1346,7 @@

 #define PCI_VENDOR_ID_REALTEK		0x10ec
 #define PCI_DEVICE_ID_REALTEK_8139	0x8139
+#define PCI_DEVICE_ID_REALTEK_8168	0x8168

 #define PCI_VENDOR_ID_XILINX		0x10ee
 #define PCI_DEVICE_ID_RME_DIGI96	0x3fc0
@ -2591,9 +2592,17 @@
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
 #define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
+#define PCI_DEVICE_ID_INTEL_QRK_SDIO	0x08A7
+#define PCI_DEVICE_ID_INTEL_QRK_UART	0x0936
+#define PCI_DEVICE_ID_INTEL_QRK_EMAC	0x0937
+#define PCI_DEVICE_ID_INTEL_QRK_ILB	0x095E
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
 #define PCI_DEVICE_ID_INTEL_CENTERTON_ILB	0x0c60
+#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDIO	0x0f15
+#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDCARD	0x0f16
+#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC	0x0f1c
+#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA	0x0f23
 #define PCI_DEVICE_ID_INTEL_82541ER	0x1078
 #define PCI_DEVICE_ID_INTEL_82541GI_LF	0x107c
 #define PCI_DEVICE_ID_INTEL_82542	0x1000
--- a/include/pci_rom.h
+++ b/include/pci_rom.h
@ -33,14 +33,25 @@ struct pci_rom_data {
 	uint16_t reserved_2;
 };

+/*
+ * Determines which execution method is used and whether we allow falling back
+ * to the other if the requested method is not available.
+ */
+enum pci_rom_emul {
+	PCI_ROM_EMULATE		= 0 << 0,
+	PCI_ROM_USE_NATIVE	= 1 << 0,
+	PCI_ROM_ALLOW_FALLBACK	= 1 << 1,
+};
+
 /**
 * pci_run_vga_bios() - Run the VGA BIOS in an x86 PC
 *
 * @dev:	Video device containing the BIOS
 * @int15_handler:	Function to call to handle int 0x15
- * @emulate:	true to use the x86 emulator, false to run native
+ * @exec_method:	flags from enum pci_rom_emul
 */
-int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate);
+int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void),
+		     int exec_method);

 /**
 * board_map_oprom_vendev() - map several PCI IDs to the one the ROM expects
--- a/Show More
+++ b/Show More