mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-29 07:33:29 +08:00
am335x: Initial support for Silica Pengwyn board
This patch add support for the Silica Pengwyn board [1] The board is based on a TI AM3354 CPU [2] All jumpers removed it will boot from the SDcard, the console is on UART1 accessible via the FDTI -> USB. The on board NAND flash is supported and can act as boot medium, depending on jumper settings. USB Host, USB Device and Ethernet are also provided but untested. [1] http://www.silica.com/product/silica-pengwyn-board.html [2] http://www.ti.com/product/am3354 Signed-off-by: Lothar Felten <lothar.felten@gmail.com> [trini: Move CONFIG_BOARD_LATE_INIT into am335x_evm.h, drop unused spi0_pin_mux from Pengwyn support] Signed-off-by: Tom Rini <trini@ti.com>
This commit is contained in:
Lothar Felten
Tom Rini
parent
3e11350255
commit
da4105dfcd
@ -58,6 +58,22 @@
|
||||
#define MT41J128MJT125_PHY_FIFO_WE 0x100
|
||||
#define MT41J128MJT125_IOCTRL_VALUE 0x18B
|
||||
|
||||
/* Micron MT41K128M16JT-187E */
|
||||
#define MT41K128MJT187E_EMIF_READ_LATENCY 0x06
|
||||
#define MT41K128MJT187E_EMIF_TIM1 0x0888B3DB
|
||||
#define MT41K128MJT187E_EMIF_TIM2 0x36337FDA
|
||||
#define MT41K128MJT187E_EMIF_TIM3 0x501F830F
|
||||
#define MT41K128MJT187E_EMIF_SDCFG 0x61C04AB2
|
||||
#define MT41K128MJT187E_EMIF_SDREF 0x0000093B
|
||||
#define MT41K128MJT187E_ZQ_CFG 0x50074BE4
|
||||
#define MT41K128MJT187E_RATIO 0x40
|
||||
#define MT41K128MJT187E_INVERT_CLKOUT 0x1
|
||||
#define MT41K128MJT187E_RD_DQS 0x3B
|
||||
#define MT41K128MJT187E_WR_DQS 0x85
|
||||
#define MT41K128MJT187E_PHY_WR_DATA 0xC1
|
||||
#define MT41K128MJT187E_PHY_FIFO_WE 0x100
|
||||
#define MT41K128MJT187E_IOCTRL_VALUE 0x18B
|
||||
|
||||
/* Micron MT41J64M16JT-125 */
|
||||
#define MT41J64MJT125_EMIF_SDCFG 0x61C04A32
|
||||
|
||||
|
||||
13
board/silica/pengwyn/Makefile
Normal file
13
board/silica/pengwyn/Makefile
Normal file
@ -0,0 +1,13 @@
|
||||
#
|
||||
# Makefile
|
||||
#
|
||||
# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y)
|
||||
obj-y := mux.o
|
||||
endif
|
||||
|
||||
obj-y += board.o
|
||||
207
board/silica/pengwyn/board.c
Normal file
207
board/silica/pengwyn/board.c
Normal file
@ -0,0 +1,207 @@
|
||||
/*
|
||||
* board.c
|
||||
*
|
||||
* Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/ddr_defs.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <i2c.h>
|
||||
#include <phy.h>
|
||||
#include <cpsw.h>
|
||||
#include "board.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
||||
|
||||
#if defined(CONFIG_SPL_BUILD)
|
||||
|
||||
/* DDR3 RAM timings */
|
||||
static const struct ddr_data ddr3_data = {
|
||||
.datardsratio0 = MT41K128MJT187E_RD_DQS,
|
||||
.datawdsratio0 = MT41K128MJT187E_WR_DQS,
|
||||
.datafwsratio0 = MT41K128MJT187E_PHY_FIFO_WE,
|
||||
.datawrsratio0 = MT41K128MJT187E_PHY_WR_DATA,
|
||||
};
|
||||
|
||||
static const struct cmd_control ddr3_cmd_ctrl_data = {
|
||||
.cmd0csratio = MT41K128MJT187E_RATIO,
|
||||
.cmd0iclkout = MT41K128MJT187E_INVERT_CLKOUT,
|
||||
.cmd1csratio = MT41K128MJT187E_RATIO,
|
||||
.cmd1iclkout = MT41K128MJT187E_INVERT_CLKOUT,
|
||||
.cmd2csratio = MT41K128MJT187E_RATIO,
|
||||
.cmd2iclkout = MT41K128MJT187E_INVERT_CLKOUT,
|
||||
};
|
||||
|
||||
static struct emif_regs ddr3_emif_reg_data = {
|
||||
.sdram_config = MT41K128MJT187E_EMIF_SDCFG,
|
||||
.ref_ctrl = MT41K128MJT187E_EMIF_SDREF,
|
||||
.sdram_tim1 = MT41K128MJT187E_EMIF_TIM1,
|
||||
.sdram_tim2 = MT41K128MJT187E_EMIF_TIM2,
|
||||
.sdram_tim3 = MT41K128MJT187E_EMIF_TIM3,
|
||||
.zq_config = MT41K128MJT187E_ZQ_CFG,
|
||||
.emif_ddr_phy_ctlr_1 = MT41K128MJT187E_EMIF_READ_LATENCY |
|
||||
PHY_EN_DYN_PWRDN,
|
||||
};
|
||||
|
||||
const struct ctrl_ioregs ddr3_ioregs = {
|
||||
.cm0ioctl = MT41K128MJT187E_IOCTRL_VALUE,
|
||||
.cm1ioctl = MT41K128MJT187E_IOCTRL_VALUE,
|
||||
.cm2ioctl = MT41K128MJT187E_IOCTRL_VALUE,
|
||||
.dt0ioctl = MT41K128MJT187E_IOCTRL_VALUE,
|
||||
.dt1ioctl = MT41K128MJT187E_IOCTRL_VALUE,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_SPL_OS_BOOT
|
||||
int spl_start_uboot(void)
|
||||
{
|
||||
/* break into full u-boot on 'c' */
|
||||
return serial_tstc() && serial_getc() == 'c';
|
||||
}
|
||||
#endif
|
||||
|
||||
#define OSC (V_OSCK/1000000)
|
||||
const struct dpll_params dpll_ddr_266 = {
|
||||
266, OSC-1, 1, -1, -1, -1, -1};
|
||||
const struct dpll_params dpll_ddr_303 = {
|
||||
303, OSC-1, 1, -1, -1, -1, -1};
|
||||
const struct dpll_params dpll_ddr_400 = {
|
||||
400, OSC-1, 1, -1, -1, -1, -1};
|
||||
|
||||
void am33xx_spl_board_init(void)
|
||||
{
|
||||
/*
|
||||
* The pengwyn board uses the TPS650250 PMIC without I2C
|
||||
* interface and will output the following fixed voltages:
|
||||
* DCDC1=3V3 (IO) DCDC2=1V5 (DDR) DCDC3=1V26 (Vmpu)
|
||||
* VLDO1=1V8 (IO) VLDO2=1V8(IO)
|
||||
* Vcore=1V1 is fixed, generated by TPS62231
|
||||
*/
|
||||
|
||||
/* Get the frequency */
|
||||
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
|
||||
|
||||
/* Set CORE Frequencies to OPP100 */
|
||||
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
|
||||
|
||||
/* 720MHz cpu, this might change on newer board revisions */
|
||||
dpll_mpu_opp100.m = MPUPLL_M_720;
|
||||
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
|
||||
}
|
||||
|
||||
const struct dpll_params *get_dpll_ddr_params(void)
|
||||
{
|
||||
/* future configs can return other clock settings */
|
||||
return &dpll_ddr_303;
|
||||
}
|
||||
|
||||
void set_uart_mux_conf(void)
|
||||
{
|
||||
enable_uart0_pin_mux();
|
||||
}
|
||||
|
||||
void set_mux_conf_regs(void)
|
||||
{
|
||||
enable_board_pin_mux();
|
||||
}
|
||||
|
||||
void sdram_init(void)
|
||||
{
|
||||
config_ddr(303, &ddr3_ioregs, &ddr3_data,
|
||||
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
|
||||
}
|
||||
#endif /* if CONFIG_SPL_BUILD */
|
||||
|
||||
/*
|
||||
* Basic board specific setup. Pinmux has been handled already.
|
||||
*/
|
||||
int board_init(void)
|
||||
{
|
||||
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
gpmc_init();
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DRIVER_TI_CPSW
|
||||
static void cpsw_control(int enabled)
|
||||
{
|
||||
/* VTP can be added here */
|
||||
return;
|
||||
}
|
||||
|
||||
static struct cpsw_slave_data cpsw_slaves[] = {
|
||||
{
|
||||
.slave_reg_ofs = 0x208,
|
||||
.sliver_reg_ofs = 0xd80,
|
||||
.phy_id = 0,
|
||||
.phy_if = PHY_INTERFACE_MODE_MII,
|
||||
},
|
||||
{
|
||||
.slave_reg_ofs = 0x308,
|
||||
.sliver_reg_ofs = 0xdc0,
|
||||
.phy_id = 1,
|
||||
.phy_if = PHY_INTERFACE_MODE_MII,
|
||||
},
|
||||
};
|
||||
|
||||
static struct cpsw_platform_data cpsw_data = {
|
||||
.mdio_base = CPSW_MDIO_BASE,
|
||||
.cpsw_base = CPSW_BASE,
|
||||
.mdio_div = 0xff,
|
||||
.channels = 8,
|
||||
.cpdma_reg_ofs = 0x800,
|
||||
.slaves = 1,
|
||||
.slave_data = cpsw_slaves,
|
||||
.ale_reg_ofs = 0xd00,
|
||||
.ale_entries = 1024,
|
||||
.host_port_reg_ofs = 0x108,
|
||||
.hw_stats_reg_ofs = 0x900,
|
||||
.bd_ram_ofs = 0x2000,
|
||||
.mac_control = (1 << 5),
|
||||
.control = cpsw_control,
|
||||
.host_port_num = 0,
|
||||
.version = CPSW_CTRL_VERSION_2,
|
||||
};
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rv, n = 0;
|
||||
uint8_t mac_addr[6];
|
||||
uint32_t mac_hi, mac_lo;
|
||||
|
||||
if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
|
||||
printf("<ethaddr> not set. Reading from E-fuse\n");
|
||||
/* try reading mac address from efuse */
|
||||
mac_lo = readl(&cdev->macid0l);
|
||||
mac_hi = readl(&cdev->macid0h);
|
||||
mac_addr[0] = mac_hi & 0xFF;
|
||||
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
||||
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
|
||||
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
|
||||
mac_addr[4] = mac_lo & 0xFF;
|
||||
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
|
||||
|
||||
if (is_valid_ether_addr(mac_addr))
|
||||
eth_setenv_enetaddr("ethaddr", mac_addr);
|
||||
else
|
||||
return n;
|
||||
}
|
||||
|
||||
writel(MII_MODE_ENABLE, &cdev->miisel);
|
||||
|
||||
rv = cpsw_register(&cpsw_data);
|
||||
if (rv < 0)
|
||||
printf("Error %d registering CPSW switch\n", rv);
|
||||
else
|
||||
n += rv;
|
||||
return n;
|
||||
}
|
||||
#endif /* if CONFIG_DRIVER_TI_CPSW */
|
||||
15
board/silica/pengwyn/board.h
Normal file
15
board/silica/pengwyn/board.h
Normal file
@ -0,0 +1,15 @@
|
||||
/*
|
||||
* board.h
|
||||
*
|
||||
* Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
void enable_uart0_pin_mux(void);
|
||||
void enable_board_pin_mux(void);
|
||||
|
||||
#endif
|
||||
98
board/silica/pengwyn/mux.c
Normal file
98
board/silica/pengwyn/mux.c
Normal file
@ -0,0 +1,98 @@
|
||||
/*
|
||||
* mux.c
|
||||
*
|
||||
* Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/io.h>
|
||||
#include "board.h"
|
||||
|
||||
/* UART0 pins E15(rx),E16(tx) [E17(rts),E18(cts)] */
|
||||
static struct module_pin_mux uart0_pin_mux[] = {
|
||||
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
|
||||
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
|
||||
{-1},
|
||||
};
|
||||
|
||||
/* unused: UART1 pins D15(tx),D16(rx),D17(cts),D18(rts) */
|
||||
|
||||
/* I2C pins C16(scl)/C17(sda) */
|
||||
static struct module_pin_mux i2c0_pin_mux[] = {
|
||||
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
|
||||
PULLUDEN | SLEWCTRL)}, /* I2C0_DATA */
|
||||
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
|
||||
PULLUDEN | SLEWCTRL)}, /* I2C0_SCLK */
|
||||
{-1},
|
||||
};
|
||||
|
||||
/* MMC0 pins */
|
||||
static struct module_pin_mux mmc0_pin_mux[] = {
|
||||
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
|
||||
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
|
||||
{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
|
||||
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
|
||||
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
|
||||
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
|
||||
{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
|
||||
{-1},
|
||||
};
|
||||
|
||||
/* MII pins */
|
||||
static struct module_pin_mux mii1_pin_mux[] = {
|
||||
{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */
|
||||
{OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */
|
||||
{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */
|
||||
{OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */
|
||||
{OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */
|
||||
{OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */
|
||||
{OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */
|
||||
{OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */
|
||||
{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */
|
||||
{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */
|
||||
{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */
|
||||
{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */
|
||||
{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */
|
||||
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
|
||||
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
|
||||
{-1},
|
||||
};
|
||||
|
||||
/* NAND pins */
|
||||
static struct module_pin_mux nand_pin_mux[] = {
|
||||
{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
|
||||
{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
|
||||
{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
|
||||
{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
|
||||
{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
|
||||
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
|
||||
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
|
||||
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
|
||||
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
|
||||
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
|
||||
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
|
||||
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
|
||||
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
|
||||
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
|
||||
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
|
||||
{-1},
|
||||
};
|
||||
|
||||
void enable_uart0_pin_mux(void)
|
||||
{
|
||||
configure_module_pin_mux(uart0_pin_mux);
|
||||
}
|
||||
|
||||
void enable_board_pin_mux()
|
||||
{
|
||||
configure_module_pin_mux(i2c0_pin_mux);
|
||||
configure_module_pin_mux(uart0_pin_mux);
|
||||
configure_module_pin_mux(mii1_pin_mux);
|
||||
configure_module_pin_mux(mmc0_pin_mux);
|
||||
configure_module_pin_mux(nand_pin_mux);
|
||||
}
|
||||
@ -256,6 +256,7 @@ Active arm armv7 am33xx phytec pcm051
|
||||
Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <r.meier@siemens.com>
|
||||
Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <r.meier@siemens.com>
|
||||
Active arm armv7 am33xx siemens rut rut - Roger Meier <r.meier@siemens.com>
|
||||
Active arm armv7 am33xx silica pengwyn pengwyn - Lothar Felten <lothar.felten@gmail.com>
|
||||
Active arm armv7 am33xx ti am335x am335x_boneblack am335x_evm:SERIAL1,CONS_INDEX=1,EMMC_BOOT Tom Rini <trini@ti.com>
|
||||
Active arm armv7 am33xx ti am335x am335x_evm am335x_evm:SERIAL1,CONS_INDEX=1,NAND Tom Rini <trini@ti.com>
|
||||
Active arm armv7 am33xx ti am335x am335x_evm_nor am335x_evm:SERIAL1,CONS_INDEX=1,NAND,NOR Tom Rini <trini@ti.com>
|
||||
|
||||
@ -20,6 +20,7 @@
|
||||
|
||||
#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
|
||||
/* Clock Defines */
|
||||
#define V_OSCK 24000000 /* Clock output from T2 */
|
||||
|
||||
208
include/configs/pengwyn.h
Normal file
208
include/configs/pengwyn.h
Normal file
@ -0,0 +1,208 @@
|
||||
/*
|
||||
* pengwyn.h
|
||||
*
|
||||
* Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
|
||||
*
|
||||
* based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_PENGWYN_H
|
||||
#define __CONFIG_PENGWYN_H
|
||||
|
||||
#define CONFIG_NAND
|
||||
#define CONFIG_SERIAL1
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
|
||||
#include <configs/ti_am335x_common.h>
|
||||
|
||||
/* Clock Defines */
|
||||
#define V_OSCK 24000000
|
||||
#define V_SCLK V_OSCK
|
||||
|
||||
/* set env size */
|
||||
#define CONFIG_ENV_SIZE 0x4000
|
||||
|
||||
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"loadaddr=0x80200000\0" \
|
||||
"fdtaddr=0x80F80000\0" \
|
||||
"bootpart=0:2\0" \
|
||||
"bootdir=/boot\0" \
|
||||
"bootfile=zImage\0" \
|
||||
"fdtfile=am335x-pengwyn.dtb\0" \
|
||||
"console=ttyO0,115200n8\0" \
|
||||
"optargs=\0" \
|
||||
"mmcdev=0\0" \
|
||||
"mmcroot=/dev/mmcblk0p2 ro\0" \
|
||||
"mmcrootfstype=ext4 rootwait\0" \
|
||||
"rootpath=/export/rootfs\0" \
|
||||
"nfsopts=nolock\0" \
|
||||
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
|
||||
"::off\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${mmcroot} " \
|
||||
"rootfstype=${mmcrootfstype}\0" \
|
||||
"netargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=/dev/nfs " \
|
||||
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
|
||||
"ip=dhcp\0" \
|
||||
"bootenv=uEnv.txt\0" \
|
||||
"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
|
||||
"importbootenv=echo Importing environment from mmc ...; " \
|
||||
"env import -t $loadaddr $filesize\0" \
|
||||
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
|
||||
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
||||
"mmcloados=run mmcargs; " \
|
||||
"bootz ${loadaddr} - ${fdtaddr};\0" \
|
||||
"mmcboot=mmc dev ${mmcdev}; " \
|
||||
"if mmc rescan; then " \
|
||||
"echo SD/MMC found on device ${mmcdev};" \
|
||||
"if run loadbootenv; then " \
|
||||
"echo Loaded environment from ${bootenv};" \
|
||||
"run importbootenv;" \
|
||||
"fi;" \
|
||||
"if test -n $uenvcmd; then " \
|
||||
"echo Running uenvcmd ...;" \
|
||||
"run uenvcmd;" \
|
||||
"fi;" \
|
||||
"if run loadimage; then " \
|
||||
"run loadfdt;" \
|
||||
"run mmcloados;" \
|
||||
"fi;" \
|
||||
"fi;\0" \
|
||||
"netboot=echo Booting from network ...; " \
|
||||
"setenv autoload no; " \
|
||||
"dhcp; " \
|
||||
"tftp ${loadaddr} ${bootfile}; " \
|
||||
"tftp ${fdtaddr} ${fdtfile}; " \
|
||||
"run netargs; " \
|
||||
"bootz ${loadaddr} - ${fdtaddr}\0" \
|
||||
"mtdids=" MTDIDS_DEFAULT "\0" \
|
||||
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
||||
"nandargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${nandroot} " \
|
||||
"rootfstype=${nandrootfstype}\0" \
|
||||
"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
|
||||
"nandrootfstype=ubifs rootwait=1\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"run nandargs; " \
|
||||
"nand read ${fdtaddr} u-boot-spl-os; " \
|
||||
"nand read ${loadaddr} kernel; " \
|
||||
"bootz ${loadaddr} - ${fdtaddr}\0"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"run mmcboot;" \
|
||||
"run nandboot;"
|
||||
|
||||
/* NS16550 Configuration: primary UART via FDTI */
|
||||
#define CONFIG_SYS_NS16550_COM1 0x44e09000
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
/* I2C Configuration */
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
||||
#define CONFIG_SYS_I2C_MULTI_EEPROMS
|
||||
|
||||
/* SPL */
|
||||
#define CONFIG_SPL_POWER_SUPPORT
|
||||
#define CONFIG_SPL_YMODEM_SUPPORT
|
||||
|
||||
/* General network SPL */
|
||||
#define CONFIG_SPL_NET_SUPPORT
|
||||
#define CONFIG_SPL_ENV_SUPPORT
|
||||
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
|
||||
|
||||
/* NAND support */
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_OMAP_GPMC
|
||||
#define CONFIG_NAND_OMAP_ELM
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
||||
CONFIG_SYS_NAND_PAGE_SIZE)
|
||||
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
||||
#define CONFIG_SYS_NAND_OOBSIZE 64
|
||||
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
||||
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
||||
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
||||
10, 11, 12, 13, 14, 15, 16, 17, \
|
||||
18, 19, 20, 21, 22, 23, 24, 25, \
|
||||
26, 27, 28, 29, 30, 31, 32, 33, \
|
||||
34, 35, 36, 37, 38, 39, 40, 41, \
|
||||
42, 43, 44, 45, 46, 47, 48, 49, \
|
||||
50, 51, 52, 53, 54, 55, 56, 57, }
|
||||
|
||||
#define CONFIG_SYS_NAND_ECCSIZE 512
|
||||
#define CONFIG_SYS_NAND_ECCBYTES 14
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
||||
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
||||
|
||||
#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
|
||||
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
|
||||
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
|
||||
"128k(SPL.backup1)," \
|
||||
"128k(SPL.backup2)," \
|
||||
"128k(SPL.backup3),1792k(u-boot)," \
|
||||
"128k(u-boot-spl-os)," \
|
||||
"128k(u-boot-env),5m(kernel),-(rootfs)"
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
|
||||
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
|
||||
|
||||
/*
|
||||
* USB configuration. We enable MUSB support, both for host and for
|
||||
* gadget. We set USB0 as peripheral and USB1 as host, based on the
|
||||
* board schematic and physical port wired to each. Then for host we
|
||||
* add mass storage support.
|
||||
*/
|
||||
#define CONFIG_USB_MUSB_DSPS
|
||||
#define CONFIG_ARCH_MISC_INIT
|
||||
#define CONFIG_MUSB_GADGET
|
||||
#define CONFIG_MUSB_PIO_ONLY
|
||||
#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
#define CONFIG_MUSB_HOST
|
||||
#define CONFIG_AM335X_USB0
|
||||
#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
|
||||
#define CONFIG_AM335X_USB1
|
||||
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
|
||||
|
||||
#if defined(CONFIG_MUSB_HOST)
|
||||
#define CONFIG_CMD_USB
|
||||
#define CONFIG_USB_STORAGE
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPL_BUILD)
|
||||
/* disable host part of MUSB in SPL */
|
||||
#undef CONFIG_MUSB_HOST
|
||||
/* Disable CPSW SPL support so we fit within the 101KiB limit. */
|
||||
#undef CONFIG_SPL_ETH_SUPPORT
|
||||
#endif
|
||||
|
||||
/* Network */
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_PHYLIB
|
||||
#define CONFIG_PHY_ADDR 1
|
||||
#define CONFIG_PHY_RESET 1
|
||||
#define CONFIG_PHY_NATSEMI
|
||||
|
||||
/* CPSW support */
|
||||
#define CONFIG_SPL_ETH_SUPPORT
|
||||
|
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
|
||||
|
||||
#endif /* ! __CONFIG_PENGWYN_H */
|
||||
@ -13,7 +13,6 @@
|
||||
#define __CONFIG_TI_AM335X_COMMON_H__
|
||||
|
||||
#define CONFIG_AM33XX
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 64
|
||||
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user