mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-18 09:13:25 +08:00
board: pm9g45: Migrate to CONFIG_DM
Migrate the following options to CONFIG_DM: CONFIG_DM_GPIO CONFIG_DM_MMC CONFIG_DM_ETH CONFIG_DM_SERIAL CONFIG_DM_USB Signed-off-by: Ilko Iliev <iliev@ronetix.at>
This commit is contained in:
Ilko Iliev
Eugen Hristev
parent
7dee1848d7
commit
d9bd42900c
@ -598,6 +598,8 @@ dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
|
||||
|
||||
dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
|
||||
|
||||
dtb-$(CONFIG_TARGET_PM9G45) += at91sam9m10g45ek.dtb
|
||||
|
||||
dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
|
||||
at91sam9g15ek.dtb \
|
||||
at91sam9g25ek.dtb \
|
||||
|
||||
@ -124,7 +124,7 @@ int board_init(void)
|
||||
/* arch number of AT91SAM9M10G45EK-Board */
|
||||
gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
pm9g45_nand_hw_init();
|
||||
@ -139,15 +139,15 @@ int board_init(void)
|
||||
int dram_init(void)
|
||||
{
|
||||
/* dram_init must store complete ramsize in gd->ram_size */
|
||||
gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
|
||||
PHYS_SDRAM_SIZE);
|
||||
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
||||
CONFIG_SYS_SDRAM_SIZE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init_banksize(void)
|
||||
{
|
||||
gd->bd->bi_dram[0].start = PHYS_SDRAM;
|
||||
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
|
||||
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
|
||||
gd->bd->bi_dram[0].size = CONFIG_SYS_SDRAM_SIZE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -2,27 +2,57 @@ CONFIG_ARM=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_SYS_TEXT_BASE=0x73f00000
|
||||
CONFIG_TARGET_PM9G45=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_DEBUG_UART_BOARD_INIT=y
|
||||
CONFIG_DEBUG_UART_BASE=0xffffee00
|
||||
CONFIG_DEBUG_UART_CLOCK=132000000
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G45"
|
||||
CONFIG_NAND_BOOT=y
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_USE_BOOTARGS=y
|
||||
CONFIG_BOOTARGS="fbcon=rotate:3 console=tty0 console=ttyS0,115200 root=/dev/mtdblock4 mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,1664k(env),2M(linux)ro,-(root) rw rootfstype=jffs2"
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
# CONFIG_CONSOLE_MUX is not set
|
||||
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||
CONFIG_BOARD_EARLY_INIT_F=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_SYS_PROMPT="U-Boot> "
|
||||
# CONFIG_CMD_BDI is not set
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_NAND=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_JFFS2=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
|
||||
CONFIG_ENV_IS_IN_NAND=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_NAND=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_CLK_AT91=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_AT91_GPIO=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_GENERIC_ATMEL_MCI=y
|
||||
CONFIG_NAND_ATMEL=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_MACB=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_AT91=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_DEBUG_UART_ATMEL=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_ATMEL_USART=y
|
||||
CONFIG_TIMER=y
|
||||
CONFIG_ATMEL_PIT_TIMER=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
|
||||
@ -15,110 +15,119 @@
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* SoC must be defined first, before hardware.h is included.
|
||||
* In this case SoC is defined in boards.cfg.
|
||||
*/
|
||||
#include <asm/hardware.h>
|
||||
|
||||
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45"
|
||||
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
||||
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
*/
|
||||
#define CONFIG_AT91_GPIO 1
|
||||
#define CONFIG_ATMEL_USART 1
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
||||
#define CONFIG_USART_ID ATMEL_ID_SYS
|
||||
|
||||
#define CONFIG_SYS_USE_NANDFLASH 1
|
||||
|
||||
/* LED */
|
||||
#define CONFIG_AT91_LED
|
||||
#define CONFIG_RED_LED GPIO_PIN_PD(31) /* this is the user1 led */
|
||||
#define CONFIG_GREEN_LED GPIO_PIN_PD(0) /* this is the user2 led */
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE 1
|
||||
|
||||
#define CONFIG_JFFS2_CMDLINE 1
|
||||
#define CONFIG_JFFS2_NAND 1
|
||||
#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */
|
||||
#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
|
||||
#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
|
||||
/* SDRAM */
|
||||
#define PHYS_SDRAM 0x70000000
|
||||
#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x70000000
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/* NAND flash */
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||
#define CONFIG_SYS_NAND_DBW_8 1
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
||||
#define CONFIG_SYS_NAND_DBW_8
|
||||
/* our ALE is AD21 */
|
||||
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
||||
#define CONFIG_SYS_NAND_MASK_ALE BIT(21)
|
||||
/* our CLE is AD22 */
|
||||
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
||||
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
|
||||
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(3)
|
||||
|
||||
#define CONFIG_SYS_NAND_MASK_CLE BIT(22)
|
||||
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
||||
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD3
|
||||
#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
|
||||
#endif
|
||||
|
||||
/* Ethernet */
|
||||
#define CONFIG_MACB 1
|
||||
#define CONFIG_RMII 1
|
||||
#define CONFIG_NET_RETRY_COUNT 20
|
||||
#define CONFIG_RESET_PHY_R 1
|
||||
#define CONFIG_RESET_PHY_R
|
||||
#define CONFIG_AT91_WANTS_COMMON_PHY
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_USB_ATMEL
|
||||
#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
|
||||
#define CONFIG_USB_OHCI_NEW 1
|
||||
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
||||
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */
|
||||
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
|
||||
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
||||
|
||||
/* board specific(not enough SRAM) */
|
||||
#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000
|
||||
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */
|
||||
#ifdef CONFIG_NAND_BOOT
|
||||
/* bootstrap + u-boot + env in nandflash */
|
||||
#define CONFIG_ENV_OFFSET 0x140000
|
||||
#define CONFIG_ENV_OFFSET_REDUND 0x100000
|
||||
#define CONFIG_ENV_SIZE 0x20000
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
||||
#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"nand read 0x70000000 0x200000 0x300000;" \
|
||||
"bootm 0x70000000"
|
||||
#elif CONFIG_SD_BOOT
|
||||
/* bootstrap + u-boot + env + linux in mmc */
|
||||
#define CONFIG_ENV_SIZE 0x4000
|
||||
|
||||
/* bootstrap + u-boot + env + linux in nandflash */
|
||||
#define CONFIG_ENV_OFFSET 0x60000
|
||||
#define CONFIG_ENV_OFFSET_REDUND 0x80000
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
||||
#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
|
||||
#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \
|
||||
"fatload mmc 0:1 0x72000000 zImage; " \
|
||||
"bootz 0x72000000 - 0x71000000"
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
|
||||
0x1000)
|
||||
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
|
||||
128 * 1024, 0x1000)
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
/* Defines for SPL */
|
||||
#define CONFIG_SPL_TEXT_BASE 0x300000
|
||||
#define CONFIG_SPL_MAX_SIZE 0x010000
|
||||
#define CONFIG_SPL_STACK 0x310000
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN 0x80000
|
||||
|
||||
#ifdef CONFIG_SD_BOOT
|
||||
|
||||
#define CONFIG_SPL_BSS_START_ADDR 0x70000000
|
||||
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000
|
||||
#define CONFIG_SYS_SPL_MALLOC_START 0x70080000
|
||||
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000
|
||||
|
||||
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
|
||||
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
|
||||
|
||||
#elif CONFIG_NAND_BOOT
|
||||
#define CONFIG_SPL_NAND_DRIVERS
|
||||
#define CONFIG_SPL_NAND_BASE
|
||||
#define CONFIG_SPL_NAND_ECC
|
||||
#define CONFIG_SPL_NAND_SOFTECC
|
||||
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
|
||||
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
|
||||
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
|
||||
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
|
||||
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
||||
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
||||
#define CONFIG_SYS_NAND_ECCSIZE 256
|
||||
#define CONFIG_SYS_NAND_ECCBYTES 3
|
||||
#define CONFIG_SYS_NAND_OOBSIZE 64
|
||||
#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
|
||||
48, 49, 50, 51, 52, 53, 54, 55, \
|
||||
56, 57, 58, 59, 60, 61, 62, 63, }
|
||||
#endif
|
||||
|
||||
#define CONFIG_SPL_ATMEL_SIZE
|
||||
#define CONFIG_SYS_MASTER_CLOCK 132096000
|
||||
#define CONFIG_SYS_AT91_PLLA 0x20c73f03
|
||||
#define CONFIG_SYS_MCKR 0x1301
|
||||
#define CONFIG_SYS_MCKR_CSS 0x1302
|
||||
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user