mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-24 20:54:24 +08:00
Code Issues Packages Projects Releases Wiki Activity

ppc: malta: Drop use of DM_PCI

Browse Source 
Now that DM_PCI is always enabled we don't need to check it. Drop this
old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2021-08-01 18:54:27 -06:00 committed by Tom Rini
parent 990ac1b341
commit d76415c251
1 changed files with 0 additions and 67 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

67
board/imgtec/malta/malta.c
View File

@ -196,7 +196,6 @@ int board_fix_fdt(void *rw_fdt_blob)
}
#endif
#if IS_ENABLED(CONFIG_DM_PCI)
int board_early_init_r(void)
{
struct udevice *dev;
@ -243,69 +242,3 @@ int board_early_init_r(void)
return 0;
}
#else
void pci_init_board(void)
{
pci_dev_t bdf;
u32 val32;
u8 val8;
switch (malta_sys_con()) {
case SYSCON_GT64120:
gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE),
0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
0x10000000, 0x10000000, 128 * 1024 * 1024,
0x00000000, 0x00000000, 0x20000);
break;
default:
case SYSCON_MSC01:
msc01_pci_init((void *)CKSEG1ADDR(MALTA_MSC01_PCI_BASE),
0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
MALTA_MSC01_PCIMEM_MAP,
CKSEG1ADDR(MALTA_MSC01_PCIMEM_BASE),
MALTA_MSC01_PCIMEM_SIZE, MALTA_MSC01_PCIIO_MAP,
0x00000000, MALTA_MSC01_PCIIO_SIZE);
break;
}
bdf = pci_find_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_0, 0);
if (bdf == -1)
panic("Failed to find PIIX4 PCI bridge\n");
/* setup PCI interrupt routing */
pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCA, 10);
pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCB, 10);
pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCC, 11);
pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCD, 11);
/* mux SERIRQ onto SERIRQ pin */
pci_read_config_dword(bdf, PCI_CFG_PIIX4_GENCFG, &val32);
val32 |= PCI_CFG_PIIX4_GENCFG_SERIRQ;
pci_write_config_dword(bdf, PCI_CFG_PIIX4_GENCFG, val32);
/* enable SERIRQ - Linux currently depends upon this */
pci_read_config_byte(bdf, PCI_CFG_PIIX4_SERIRQC, &val8);
val8 |= PCI_CFG_PIIX4_SERIRQC_EN | PCI_CFG_PIIX4_SERIRQC_CONT;
pci_write_config_byte(bdf, PCI_CFG_PIIX4_SERIRQC, val8);
bdf = pci_find_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB, 0);
if (bdf == -1)
panic("Failed to find PIIX4 IDE controller\n");
/* enable bus master & IO access */
val32 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
pci_write_config_dword(bdf, PCI_COMMAND, val32);
/* set latency */
pci_write_config_byte(bdf, PCI_LATENCY_TIMER, 0x40);
/* enable IDE/ATA */
pci_write_config_dword(bdf, PCI_CFG_PIIX4_IDETIM_PRI,
PCI_CFG_PIIX4_IDETIM_IDE);
pci_write_config_dword(bdf, PCI_CFG_PIIX4_IDETIM_SEC,
PCI_CFG_PIIX4_IDETIM_IDE);
}
#endif