ARM: dts: uniphier: sync with Linux 5.1-rc4

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit is contained in:
Masahiro Yamada 2019-04-12 18:55:50 +09:00
parent 216800acf1
commit cd33feda6b
8 changed files with 160 additions and 19 deletions

View File

@ -33,7 +33,7 @@
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0 0x000>;
clocks = <&sys_clk 33>;
enable-method = "psci";
@ -42,7 +42,7 @@
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0 0x001>;
clocks = <&sys_clk 33>;
enable-method = "psci";

View File

@ -43,7 +43,7 @@
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
compatible = "arm,cortex-a72";
reg = <0 0x000>;
clocks = <&sys_clk 32>;
enable-method = "psci";
@ -53,7 +53,7 @@
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
compatible = "arm,cortex-a72";
reg = <0 0x001>;
clocks = <&sys_clk 32>;
enable-method = "psci";
@ -63,7 +63,7 @@
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0 0x100>;
clocks = <&sys_clk 33>;
enable-method = "psci";
@ -73,7 +73,7 @@
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0 0x101>;
clocks = <&sys_clk 33>;
enable-method = "psci";
@ -206,13 +206,10 @@
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device = <&cpu0
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_alert>;
cooling-device = <&cpu2
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@ -891,6 +888,53 @@
};
};
pcie: pcie@66000000 {
compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
status = "disabled";
reg-names = "dbi", "link", "config";
reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
<0x2fff0000 0x10000>;
#address-cells = <3>;
#size-cells = <2>;
clocks = <&sys_clk 24>;
resets = <&sys_rst 24>;
num-lanes = <1>;
num-viewport = <1>;
bus-range = <0x0 0xff>;
device_type = "pci";
ranges =
/* downstream I/O */
<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
/* non-prefetchable memory */
<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
#interrupt-cells = <1>;
interrupt-names = "dma", "msi";
interrupts = <0 224 4>, <0 225 4>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */
<0 0 0 2 &pcie_intc 1>, /* INTB */
<0 0 0 3 &pcie_intc 2>, /* INTC */
<0 0 0 4 &pcie_intc 3>; /* INTD */
phy-names = "pcie-phy";
phys = <&pcie_phy>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <0 226 4>;
};
};
pcie_phy: phy@66038000 {
compatible = "socionext,uniphier-ld20-pcie-phy";
reg = <0x66038000 0x4000>;
#phy-cells = <0>;
clocks = <&sys_clk 24>;
resets = <&sys_rst 24>;
socionext,syscon = <&soc_glue>;
};
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";

View File

@ -235,6 +235,16 @@
};
};
dmac: dma-controller@5a000000 {
compatible = "socionext,uniphier-mio-dmac";
reg = <0x5a000000 0x1000>;
interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
<0 71 4>, <0 72 4>, <0 73 4>;
clocks = <&mio_clk 7>;
resets = <&mio_rst 7>;
#dma-cells = <1>;
};
sd: sdhc@5a400000 {
compatible = "socionext,uniphier-sd-v2.91";
status = "disabled";
@ -246,6 +256,8 @@
clocks = <&mio_clk 0>;
reset-names = "host", "bridge";
resets = <&mio_rst 0>, <&mio_rst 3>;
dma-names = "rx-tx";
dmas = <&dmac 4>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
@ -263,6 +275,8 @@
clocks = <&mio_clk 1>;
reset-names = "host", "bridge", "hw";
resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
dma-names = "rx-tx";
dmas = <&dmac 6>;
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;

View File

@ -269,6 +269,16 @@
};
};
dmac: dma-controller@5a000000 {
compatible = "socionext,uniphier-mio-dmac";
reg = <0x5a000000 0x1000>;
interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
<0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
clocks = <&mio_clk 7>;
resets = <&mio_rst 7>;
#dma-cells = <1>;
};
sd: sdhc@5a400000 {
compatible = "socionext,uniphier-sd-v2.91";
status = "disabled";
@ -280,6 +290,8 @@
clocks = <&mio_clk 0>;
reset-names = "host", "bridge";
resets = <&mio_rst 0>, <&mio_rst 3>;
dma-names = "rx-tx";
dmas = <&dmac 4>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
@ -297,6 +309,8 @@
clocks = <&mio_clk 1>;
reset-names = "host", "bridge", "hw";
resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
dma-names = "rx-tx";
dmas = <&dmac 5>;
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;
@ -313,6 +327,8 @@
clocks = <&mio_clk 2>;
reset-names = "host", "bridge";
resets = <&mio_rst 2>, <&mio_rst 5>;
dma-names = "rx-tx";
dmas = <&dmac 6>;
bus-width = <4>;
cap-sd-highspeed;
};

View File

@ -141,8 +141,10 @@
cooling-maps {
map {
trip = <&cpu_alert>;
cooling-device = <&cpu0
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};

View File

@ -109,6 +109,10 @@
status = "okay";
};
&pcie {
status = "okay";
};
&nand {
status = "okay";
};

View File

@ -39,7 +39,7 @@
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0 0x000>;
clocks = <&sys_clk 33>;
enable-method = "psci";
@ -48,7 +48,7 @@
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0 0x001>;
clocks = <&sys_clk 33>;
enable-method = "psci";
@ -57,7 +57,7 @@
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0 0x002>;
clocks = <&sys_clk 33>;
enable-method = "psci";
@ -66,7 +66,7 @@
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
compatible = "arm,cortex-a53";
reg = <0 0x003>;
clocks = <&sys_clk 33>;
enable-method = "psci";
@ -765,6 +765,53 @@
};
};
pcie: pcie@66000000 {
compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
status = "disabled";
reg-names = "dbi", "link", "config";
reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
<0x2fff0000 0x10000>;
#address-cells = <3>;
#size-cells = <2>;
clocks = <&sys_clk 24>;
resets = <&sys_rst 24>;
num-lanes = <1>;
num-viewport = <1>;
bus-range = <0x0 0xff>;
device_type = "pci";
ranges =
/* downstream I/O */
<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
/* non-prefetchable memory */
<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
#interrupt-cells = <1>;
interrupt-names = "dma", "msi";
interrupts = <0 224 4>, <0 225 4>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */
<0 0 0 2 &pcie_intc 1>, /* INTB */
<0 0 0 3 &pcie_intc 2>, /* INTC */
<0 0 0 4 &pcie_intc 3>; /* INTD */
phy-names = "pcie-phy";
phys = <&pcie_phy>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <0 226 4>;
};
};
pcie_phy: phy@66038000 {
compatible = "socionext,uniphier-pxs3-pcie-phy";
reg = <0x66038000 0x4000>;
#phy-cells = <0>;
clocks = <&sys_clk 24>;
resets = <&sys_rst 24>;
socionext,syscon = <&soc_glue>;
};
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";

View File

@ -239,6 +239,16 @@
};
};
dmac: dma-controller@5a000000 {
compatible = "socionext,uniphier-mio-dmac";
reg = <0x5a000000 0x1000>;
interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
<0 71 4>, <0 72 4>, <0 73 4>;
clocks = <&mio_clk 7>;
resets = <&mio_rst 7>;
#dma-cells = <1>;
};
sd: sdhc@5a400000 {
compatible = "socionext,uniphier-sd-v2.91";
status = "disabled";
@ -250,6 +260,8 @@
clocks = <&mio_clk 0>;
reset-names = "host", "bridge";
resets = <&mio_rst 0>, <&mio_rst 3>;
dma-names = "rx-tx";
dmas = <&dmac 4>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
@ -267,6 +279,8 @@
clocks = <&mio_clk 1>;
reset-names = "host", "bridge", "hw";
resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
dma-names = "rx-tx";
dmas = <&dmac 6>;
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;