serial: Convert ARM_DCC to Kconfig

The symbol "CONFIG_ARM_DCC" is used to control building drivers/serial/arm_dcc.c. Provide a simple Kconfig entry for this. Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tom McLeod <tom.mcleod@opalkelly.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2024-11-24 12:44:23 +08:00 · 2020-06-02 17:26:33 -04:00 · 2020-06-02 17:26:33 -04:00 · c2a38411d1
commit c2a38411d1
parent 07d90d8bd4
26 changed files with 27 additions and 5 deletions
--- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
+++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
@ -55,6 +55,7 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
--- a/configs/bitmain_antminer_s9_defconfig
+++ b/configs/bitmain_antminer_s9_defconfig
@ -66,6 +66,7 @@ CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 # CONFIG_WATCHDOG is not set
 CONFIG_WDT=y
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@ -48,6 +48,7 @@ CONFIG_PHY_XILINX=y
 CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_DEBUG_UART_ZYNQ=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
--- a/configs/topic_miami_defconfig
+++ b/configs/topic_miami_defconfig
@ -49,6 +49,7 @@ CONFIG_SF_DEFAULT_SPEED=108000000
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_DEBUG_UART_ZYNQ=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
--- a/configs/topic_miamilite_defconfig
+++ b/configs/topic_miamilite_defconfig
@ -49,6 +49,7 @@ CONFIG_SF_DEFAULT_SPEED=108000000
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_DEBUG_UART_ZYNQ=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
--- a/configs/topic_miamiplus_defconfig
+++ b/configs/topic_miamiplus_defconfig
@ -49,6 +49,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 # CONFIG_NETDEVICES is not set
 CONFIG_DEBUG_UART_ZYNQ=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
--- a/configs/xilinx_versal_mini_defconfig
+++ b/configs/xilinx_versal_mini_defconfig
@ -54,4 +54,5 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_DM_WARN is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 # CONFIG_MMC is not set
+CONFIG_ARM_DCC=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_versal_mini_emmc0_defconfig
+++ b/configs/xilinx_versal_mini_emmc0_defconfig
@ -52,5 +52,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_ARM_DCC=y
 CONFIG_FAT_WRITE=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_versal_mini_emmc1_defconfig
+++ b/configs/xilinx_versal_mini_emmc1_defconfig
@ -52,5 +52,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_ARM_DCC=y
 CONFIG_FAT_WRITE=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@ -69,6 +69,7 @@ CONFIG_PHY_FIXED=y
 CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
+CONFIG_ARM_DCC=y
 CONFIG_PL01X_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@ -88,6 +88,7 @@ CONFIG_PHY_REALTEK=y
 CONFIG_PHY_XILINX=y
 CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQ_QSPI=y
--- a/configs/xilinx_zynqmp_mini_defconfig
+++ b/configs/xilinx_zynqmp_mini_defconfig
@ -52,5 +52,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_DM_WARN is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
 # CONFIG_MMC is not set
+CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_zynqmp_mini_emmc0_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig
@ -55,5 +55,6 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_zynqmp_mini_emmc1_defconfig
+++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig
@ -55,5 +55,6 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_zynqmp_mini_nand_defconfig
+++ b/configs/xilinx_zynqmp_mini_nand_defconfig
@ -51,5 +51,6 @@ CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ARASAN=y
 CONFIG_SYS_NAND_MAX_CHIPS=2
+CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_zynqmp_mini_nand_single_defconfig
+++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig
@ -50,5 +50,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ARASAN=y
+CONFIG_ARM_DCC=y
 CONFIG_PANIC_HANG=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/xilinx_zynqmp_mini_qspi_defconfig
+++ b/configs/xilinx_zynqmp_mini_qspi_defconfig
@ -60,6 +60,7 @@ CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_ARM_DCC=y
 CONFIG_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
 CONFIG_PANIC_HANG=y
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@ -116,6 +116,7 @@ CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_SPI=y
 CONFIG_ZYNQ_SPI=y
--- a/configs/zynq_cse_nand_defconfig
+++ b/configs/zynq_cse_nand_defconfig
@ -56,4 +56,5 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ZYNQ=y
+CONFIG_ARM_DCC=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/zynq_cse_nor_defconfig
+++ b/configs/zynq_cse_nor_defconfig
@ -59,4 +59,5 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_CFI_FLASH=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_ARM_DCC=y
 # CONFIG_EFI_LOADER is not set
--- a/configs/zynq_cse_qspi_defconfig
+++ b/configs/zynq_cse_qspi_defconfig
@ -69,5 +69,6 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_DEBUG_UART_ARM_DCC=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_QSPI=y
 # CONFIG_EFI_LOADER is not set
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@ -504,6 +504,12 @@ config ARC_SERIAL
 	  Select this to enable support for ARC UART now typically
 	  only used in Synopsys DesignWare ARC simulators like nSIM.

+config ARM_DCC
+	bool "ARM Debug Communication Channel (DCC) as UART support"
+	depends on ARM
+	help
+	  Select this to enable using the ARM DCC as a form of UART.
+
 config ATMEL_USART
 	bool "Atmel USART support"
 	help
--- a/include/configs/xilinx_versal.h
+++ b/include/configs/xilinx_versal.h
@ -27,7 +27,6 @@
 #endif

 /* Serial setup */
-#define CONFIG_ARM_DCC
 #define CONFIG_CPU_ARMV8

 #define CONFIG_SYS_BAUDRATE_TABLE \
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@ -30,7 +30,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x2000000)

 /* Serial setup */
-#define CONFIG_ARM_DCC
 #define CONFIG_CPU_ARMV8

 #define CONFIG_SYS_BAUDRATE_TABLE \
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@ -33,8 +33,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

-#define CONFIG_ARM_DCC
-
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@ -51,7 +51,6 @@ CONFIG_ARMV7_SECURE_MAX_SIZE
 CONFIG_ARMV7_SECURE_RESERVE_SIZE
 CONFIG_ARMV8_SWITCH_TO_EL1
 CONFIG_ARM_ARCH_CP15_ERRATA
-CONFIG_ARM_DCC
 CONFIG_ARM_FREQ
 CONFIG_ARM_GIC_BASE_ADDRESS
 CONFIG_ARM_PL180_MMCI_BASE