mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-30 08:03:32 +08:00
arch/arm/dts: Add Turris Omnia device tree
This device tree is taken from mainline Linux kernel commit
7b7db5ab. Added is also a -u-boot.dtsi file with these additions:
- aliases for I2C and SPI devices are added, because i2cmux and
SPI flash doesn't work otherwise
- spi_flash node has been added so that the new DM API works
- the ATSHA204A node is added in the i2c@5 node
- "u-boot,dm-pre-reloc"s are added in needed nodes for SPL
build to work correctly
Signed-off-by: Marek Behun <marek.behun@nic.cz>
create mode 100644 arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
create mode 100644 arch/arm/dts/armada-385-turris-omnia.dts
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Marek Behún
Stefan Roese
parent
2ab7704a6d
commit
c2502e7b82
55
arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
Normal file
55
arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
Normal file
@ -0,0 +1,55 @@
|
||||
/*
|
||||
* Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2cmux;
|
||||
spi0 = &spi0;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
i2cmux: i2cmux@70 {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
i2c@0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
i2c@1 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
i2c@5 {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
/* ATSHA204A at address 0x64 */
|
||||
atsha204a@64 {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "atmel,atsha204a";
|
||||
reg = <0x64>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
spi-flash@0 {
|
||||
compatible = "spi-flash";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
392
arch/arm/dts/armada-385-turris-omnia.dts
Normal file
392
arch/arm/dts/armada-385-turris-omnia.dts
Normal file
@ -0,0 +1,392 @@
|
||||
/*
|
||||
* Device Tree file for the Turris Omnia
|
||||
*
|
||||
* Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
|
||||
* Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "armada-385.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Turris Omnia";
|
||||
compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x40000000>; /* 1024 MB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
||||
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
||||
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
|
||||
|
||||
internal-regs {
|
||||
|
||||
/* USB part of the PCIe2/USB 2.0 port */
|
||||
usb@58000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@a8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sdhci@d8000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhci_pins>;
|
||||
status = "okay";
|
||||
|
||||
bus-width = <8>;
|
||||
no-1-8-v;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
usb3@f0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@f8000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
pcie@1,0 {
|
||||
/* Port 0, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie@2,0 {
|
||||
/* Port 1, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie@3,0 {
|
||||
/* Port 2, Lane 0 */
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Connected to 88E6176 switch, port 6 */
|
||||
ð0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ge0_rgmii_pins>;
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
/* Connected to 88E6176 switch, port 5 */
|
||||
ð1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ge1_rgmii_pins>;
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
/* WAN port */
|
||||
ð2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
phy = <&phy1>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
|
||||
i2cmux@70 {
|
||||
compatible = "nxp,pca9547";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
status = "okay";
|
||||
|
||||
i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
/* STM32F0 command interface at address 0x2a */
|
||||
/* leds device (in STM32F0) at address 0x2b */
|
||||
|
||||
eeprom@54 {
|
||||
compatible = "at,24c64";
|
||||
reg = <0x54>;
|
||||
|
||||
/* The EEPROM contains data for bootloader.
|
||||
* Contents:
|
||||
* struct omnia_eeprom {
|
||||
* u32 magic; (=0x0341a034 in LE)
|
||||
* u32 ramsize; (in GiB)
|
||||
* char regdomain[4];
|
||||
* u32 crc32;
|
||||
* };
|
||||
*/
|
||||
};
|
||||
};
|
||||
|
||||
i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
/* routed to PCIe0/mSATA connector (CN7A) */
|
||||
};
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
|
||||
/* routed to PCIe1/USB2 connector (CN61A) */
|
||||
};
|
||||
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
|
||||
/* routed to PCIe2 connector (CN62A) */
|
||||
};
|
||||
|
||||
i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
|
||||
/* routed to SFP+ */
|
||||
};
|
||||
|
||||
i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
|
||||
/* ATSHA204A at address 0x64 */
|
||||
};
|
||||
|
||||
i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
|
||||
/* exposed on pin header */
|
||||
};
|
||||
|
||||
i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
|
||||
pcawan: gpio@71 {
|
||||
/*
|
||||
* GPIO expander for SFP+ signals and
|
||||
* and phy irq
|
||||
*/
|
||||
compatible = "nxp,pca9538";
|
||||
reg = <0x71>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcawan_pins>;
|
||||
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
status = "okay";
|
||||
|
||||
phy1: phy@1 {
|
||||
status = "okay";
|
||||
compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
|
||||
/* irq is connected to &pcawan pin 7 */
|
||||
};
|
||||
|
||||
/* Switch MV88E6176 at address 0x10 */
|
||||
switch@10 {
|
||||
compatible = "marvell,mv88e6085";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
dsa,member = <0 0>;
|
||||
|
||||
reg = <0x10>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ports@0 {
|
||||
reg = <0>;
|
||||
label = "lan0";
|
||||
};
|
||||
|
||||
ports@1 {
|
||||
reg = <1>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
ports@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
ports@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
ports@4 {
|
||||
reg = <4>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
ports@5 {
|
||||
reg = <5>;
|
||||
label = "cpu";
|
||||
ethernet = <ð1>;
|
||||
phy-mode = "rgmii-id";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
/* port 6 is connected to eth0 */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcawan_pins: pcawan-pins {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
spi0cs0_pins: spi0cs0-pins {
|
||||
marvell,pins = "mpp25";
|
||||
marvell,function = "spi0";
|
||||
};
|
||||
|
||||
spi0cs1_pins: spi0cs1-pins {
|
||||
marvell,pins = "mpp26";
|
||||
marvell,function = "spi0";
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi-nor@0 {
|
||||
compatible = "spansion,s25fl164k", "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x00100000>;
|
||||
label = "U-Boot";
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
reg = <0x00100000 0x00700000>;
|
||||
label = "Rescue system";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
/* Pin header CN10 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
/* Pin header CN11 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user