Merge branch '2021-07-28-build-improvements'

- Assorted Makefile cleanups - A few code / build cleanups
2024-11-25 21:24:21 +08:00 · 2021-07-28 18:51:16 -04:00 · 2021-07-28 18:51:16 -04:00 · bbcacdf4cd
commit bbcacdf4cd
parent 22ecb12132 537892065a
548 changed files with 1233 additions and 1188 deletions
--- a/15
+++ b/15
@ -802,16 +802,19 @@ c_flags := $(KBUILD_CFLAGS) $(cpp_flags)

 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)

-libs-y += lib/
+libs-$(CONFIG_API) += api/
 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+libs-y += cmd/
+libs-y += common/
 libs-$(CONFIG_OF_EMBED) += dts/
+libs-y += env/
+libs-y += lib/
 libs-y += fs/
 libs-y += net/
 libs-y += disk/
 libs-y += drivers/
 libs-y += drivers/dma/
 libs-y += drivers/gpio/
-libs-y += drivers/i2c/
 libs-y += drivers/net/
 libs-y += drivers/net/phy/
 libs-y += drivers/power/ \
@ -841,10 +844,6 @@ libs-y += drivers/usb/musb/
 libs-y += drivers/usb/musb-new/
 libs-y += drivers/usb/phy/
 libs-y += drivers/usb/ulpi/
-libs-y += cmd/
-libs-y += common/
-libs-y += env/
-libs-$(CONFIG_API) += api/
 ifdef CONFIG_POST
 libs-y += post/
 endif
@ -1128,7 +1127,7 @@ endif
 	$(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
 		$(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
 	$(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
-	$(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_I2C))
+	$(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
 	@# Check that this build does not use CONFIG options that we do not
 	@# know about unless they are in Kconfig. All the existing CONFIG
 	@# options are whitelisted, so new ones should not be added.
@ -2100,7 +2099,7 @@ CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \

 # Directories & files removed with 'make mrproper'
 MRPROPER_DIRS  += include/config include/generated spl tpl \
-		  .tmp_objdiff doc/output
+		  .tmp_objdiff doc/output include/asm

 # Remove include/asm symlink created by U-Boot before v2014.01
 MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
--- a/25
+++ b/25
@ -128,7 +128,7 @@ Examples:
 Directory Hierarchy:
 ====================

-/arch			Architecture specific files
+/arch			Architecture-specific files
  /arc			Files generic to ARC architecture
  /arm			Files generic to ARM architecture
  /m68k			Files generic to m68k architecture
@ -142,16 +142,16 @@ Directory Hierarchy:
  /sh			Files generic to SH architecture
  /x86			Files generic to x86 architecture
  /xtensa		Files generic to Xtensa architecture
-/api			Machine/arch independent API for external apps
-/board			Board dependent files
+/api			Machine/arch-independent API for external apps
+/board			Board-dependent files
 /cmd			U-Boot commands functions
-/common			Misc architecture independent functions
+/common			Misc architecture-independent functions
 /configs		Board default configuration files
 /disk			Code for disk drive partition handling
-/doc			Documentation (don't expect too much)
-/drivers		Commonly used device drivers
-/dts			Contains Makefile for building internal U-Boot fdt.
-/env			Environment files
+/doc			Documentation (a mix of ReST and READMEs)
+/drivers		Device drivers
+/dts			Makefile for building internal U-Boot fdt.
+/env			Environment support
 /examples		Example code for standalone applications, etc.
 /fs			Filesystem code (cramfs, ext2, jffs2, etc.)
 /include		Header Files
@ -161,7 +161,7 @@ Directory Hierarchy:
 /post			Power On Self Test
 /scripts		Various build scripts and Makefiles
 /test			Various unit test files
-/tools			Tools to build S-Record or U-Boot images, etc.
+/tools			Tools to build and sign FIT images, etc.

 Software Configuration:
 =======================
@ -1461,9 +1461,12 @@ The following options need to be configured:
 		In such cases CONFIG_GPIO_LED_INVERTED_TABLE may be defined
 		with a list of GPIO LEDs that have inverted polarity.

- I2C Support:	CONFIG_SYS_I2C
+- I2C Support:	CONFIG_SYS_I2C_LEGACY

-		This enable the NEW i2c subsystem, and will allow you to use
+		Note: This is deprecated in favour of driver model. Use
+		CONFIG_DM_I2C instead.
+
+		This enable the legacy i2c subsystem, and will allow you to use
 		i2c commands at the u-boot command line (as long as you set
 		    CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE
 		    for defining speed and slave address
--- a/arch/Kconfig
+++ b/arch/Kconfig
@ -229,8 +229,8 @@ config X86
 	# Thing to enable for when SPL/TPL are enabled: SPL
 	imply SPL_DM
 	imply SPL_OF_LIBFDT
-	imply SPL_DRIVERS_MISC_SUPPORT
-	imply SPL_GPIO_SUPPORT
+	imply SPL_DRIVERS_MISC
+	imply SPL_GPIO
 	imply SPL_PINCTRL
 	imply SPL_LIBCOMMON_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
@ -243,8 +243,8 @@ config X86
 	imply SPL_SYSCON
 	# TPL
 	imply TPL_DM
-	imply TPL_DRIVERS_MISC_SUPPORT
-	imply TPL_GPIO_SUPPORT
+	imply TPL_DRIVERS_MISC
+	imply TPL_GPIO
 	imply TPL_PINCTRL
 	imply TPL_LIBCOMMON_SUPPORT
 	imply TPL_LIBGENERIC_SUPPORT
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -954,7 +954,7 @@ config ARCH_SOCFPGA
 	select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64
 	select SPL_SERIAL_SUPPORT
 	select SPL_SYSRESET
-	select SPL_WATCHDOG_SUPPORT
+	select SPL_WATCHDOG
 	select SUPPORT_SPL
 	select SYS_NS16550
 	select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
@ -1019,11 +1019,11 @@ config ARCH_SUNXI
 	imply FIT
 	imply OF_LIBFDT_OVERLAY
 	imply PRE_CONSOLE_BUFFER
-	imply SPL_GPIO_SUPPORT
+	imply SPL_GPIO
 	imply SPL_LIBCOMMON_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT if MMC
-	imply SPL_POWER_SUPPORT
+	imply SPL_POWER
 	imply SPL_SERIAL_SUPPORT
 	imply USB_GADGET

--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@ -329,7 +329,7 @@ static void erratum_rcw_src(void)
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009203
 static void erratum_a009203(void)
 {
-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 	u8 __iomem *ptr;
 #ifdef I2C1_BASE_ADDR
 	ptr = (u8 __iomem *)(I2C1_BASE_ADDR + I2C_DEBUG_REG);
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@ -88,8 +88,8 @@ void board_init_f(ulong dummy)
 	preloader_console_init();
 	spl_set_bd();

-#ifdef CONFIG_SYS_I2C
-#ifdef CONFIG_SPL_I2C_SUPPORT
+#ifdef CONFIG_SYS_I2C_LEGACY
+#ifdef CONFIG_SPL_I2C
 	i2c_init_all();
 #endif
 #endif
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@ -184,7 +184,7 @@
 #define TZPC_BASE				0x02200000
 #define TZPCDECPROT_0_SET_BASE			(TZPC_BASE + 0x804)
 #if !CONFIG_IS_ENABLED(DM_I2C)
-#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_LEGACY
 #define CONFIG_SYS_I2C_EARLY_INIT
 #endif
 #define SRDS_MAX_LANES  8
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@ -78,7 +78,7 @@ endif

 if ARCH_EXYNOS5

-config SPL_GPIO_SUPPORT
+config SPL_GPIO
 	default y

 config SPL_LIBCOMMON_SUPPORT
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@ -301,7 +301,7 @@ config TARGET_MX6DL_MAMOJ
 	select PINCTRL
 	select SPL
 	select SPL_DM if SPL
-	select SPL_GPIO_SUPPORT if SPL
+	select SPL_GPIO if SPL
 	select SPL_LIBCOMMON_SUPPORT if SPL
 	select SPL_LIBDISK_SUPPORT if SPL
 	select SPL_LIBGENERIC_SUPPORT if SPL
@ -312,9 +312,9 @@ config TARGET_MX6DL_MAMOJ
 	select SPL_SEPARATE_BSS if SPL
 	select SPL_SERIAL_SUPPORT if SPL
 	select SPL_USB_GADGET if SPL
-	select SPL_USB_HOST_SUPPORT if SPL
+	select SPL_USB_HOST if SPL
 	select SPL_USB_SDP_SUPPORT if SPL
-	select SPL_WATCHDOG_SUPPORT if SPL
+	select SPL_WATCHDOG if SPL
 	select SUPPORT_SPL
 	imply CMD_DM

--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@ -96,7 +96,7 @@
 */
 #if defined(CONFIG_CMD_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
 #ifndef CONFIG_SYS_I2C_SOFT
-#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_LEGACY
 #define CONFIG_SYS_I2C_MVTWSI
 #endif
 #define CONFIG_SYS_I2C_SLAVE		0x0
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@ -264,7 +264,7 @@ config MVEBU_SPL_BOOT_DEVICE_MMC
 	# GPIO needed for eMMC/SD card presence detection
 	select SPL_DM_GPIO
 	select SPL_DM_MMC
-	select SPL_GPIO_SUPPORT
+	select SPL_GPIO
 	select SPL_LIBDISK_SUPPORT
 	select SPL_MMC_SUPPORT

--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@ -15,15 +15,15 @@ config OMAP34XX
 	imply NAND_OMAP_GPMC
 	imply SPL_FS_EXT4
 	imply SPL_FS_FAT
-	imply SPL_GPIO_SUPPORT
-	imply SPL_I2C_SUPPORT
+	imply SPL_GPIO
+	imply SPL_I2C
 	imply SPL_LIBCOMMON_SUPPORT
 	imply SPL_LIBDISK_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
 	imply SPL_NAND_SUPPORT
 	imply SPL_OMAP3_ID_NAND
-	imply SPL_POWER_SUPPORT
+	imply SPL_POWER
 	imply SPL_SERIAL_SUPPORT
 	imply SYS_I2C_OMAP24XX
 	imply SYS_THUMB_BUILD
@ -37,15 +37,15 @@ config OMAP44XX
 	imply SPL_DISPLAY_PRINT
 	imply SPL_FS_EXT4
 	imply SPL_FS_FAT
-	imply SPL_GPIO_SUPPORT
-	imply SPL_I2C_SUPPORT
+	imply SPL_GPIO
+	imply SPL_I2C
 	imply SPL_LIBCOMMON_SUPPORT
 	imply SPL_LIBDISK_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
 	imply SPL_NAND_SIMPLE
 	imply SPL_NAND_SUPPORT
-	imply SPL_POWER_SUPPORT
+	imply SPL_POWER
 	imply SPL_SERIAL_SUPPORT
 	imply SYS_I2C_OMAP24XX
 	imply SYS_THUMB_BUILD
@ -61,8 +61,8 @@ config OMAP54XX
 	imply SPL_ENV_SUPPORT
 	imply SPL_FS_EXT4
 	imply SPL_FS_FAT
-	imply SPL_GPIO_SUPPORT
-	imply SPL_I2C_SUPPORT
+	imply SPL_GPIO
+	imply SPL_I2C
 	imply SPL_LIBCOMMON_SUPPORT
 	imply SPL_LIBDISK_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
@ -70,7 +70,7 @@ config OMAP54XX
 	imply SPL_NAND_AM33XX_BCH
 	imply SPL_NAND_AM33XX_BCH
 	imply SPL_NAND_SUPPORT
-	imply SPL_POWER_SUPPORT
+	imply SPL_POWER
 	imply SPL_SERIAL_SUPPORT
 	imply SYS_I2C_OMAP24XX

--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@ -41,19 +41,19 @@ config TARGET_AM335X_EVM
 	imply SPL_ENV_SUPPORT
 	imply SPL_FS_EXT4
 	imply SPL_FS_FAT
-	imply SPL_GPIO_SUPPORT
-	imply SPL_I2C_SUPPORT
+	imply SPL_GPIO
+	imply SPL_I2C
 	imply SPL_LIBCOMMON_SUPPORT
 	imply SPL_LIBDISK_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
 	imply SPL_NAND_SUPPORT
 	imply SPL_OF_LIBFDT
-	imply SPL_POWER_SUPPORT
+	imply SPL_POWER
 	imply SPL_SEPARATE_BSS
 	imply SPL_SERIAL_SUPPORT
 	imply SPL_SYS_MALLOC_SIMPLE
-	imply SPL_WATCHDOG_SUPPORT
+	imply SPL_WATCHDOG
 	imply SPL_YMODEM_SUPPORT
 	help
 	  This option specifies support for the AM335x
@ -225,16 +225,16 @@ config TARGET_AM43XX_EVM
 	imply SPL_ENV_SUPPORT
 	imply SPL_FS_EXT4
 	imply SPL_FS_FAT
-	imply SPL_GPIO_SUPPORT
-	imply SPL_I2C_SUPPORT
+	imply SPL_GPIO
+	imply SPL_I2C
 	imply SPL_LIBCOMMON_SUPPORT
 	imply SPL_LIBDISK_SUPPORT
 	imply SPL_LIBGENERIC_SUPPORT
 	imply SPL_MMC_SUPPORT
 	imply SPL_NAND_SUPPORT
-	imply SPL_POWER_SUPPORT
+	imply SPL_POWER
 	imply SPL_SERIAL_SUPPORT
-	imply SPL_WATCHDOG_SUPPORT
+	imply SPL_WATCHDOG
 	imply SPL_YMODEM_SUPPORT
 	help
 	  This option specifies support for the AM43xx
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@ -209,7 +209,7 @@ int cpu_mmc_init(struct bd_info *bis)
 #if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
 	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
 	(!CONFIG_IS_ENABLED(DM_USB) || !CONFIG_IS_ENABLED(OF_CONTROL)) && \
-	(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_MUSB_NEW_SUPPORT))
+	(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_MUSB_NEW))

 static struct musb_hdrc_config musb_config = {
 	.multipoint     = 1,
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@ -104,7 +104,7 @@ void save_omap_boot_params(void)
 			sys_boot_device = 1;
 			break;
 #endif
-#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT)
+#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH)
 		case BOOT_DEVICE_CPGMAC:
 			sys_boot_device = 1;
 			break;
@ -202,10 +202,10 @@ void spl_board_init(void)
 #if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
 	gpmc_init();
 #endif
-#if defined(CONFIG_SPL_I2C_SUPPORT) && !CONFIG_IS_ENABLED(DM_I2C)
+#if defined(CONFIG_SPL_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
 	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
-#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
+#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW)
 	arch_misc_init();
 #endif
 #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@ -56,7 +56,7 @@ config ROCKCHIP_RK3188
 	select SPL_REGMAP
 	select SPL_SYSCON
 	select SPL_RAM
-	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_DRIVERS_MISC
 	select SPL_ROCKCHIP_EARLYRETURN_TO_BROM
 	select SPL_ROCKCHIP_BACK_TO_BROM
 	select BOARD_LATE_INIT
@ -82,7 +82,7 @@ config ROCKCHIP_RK322X
 	select TPL_OF_LIBFDT
 	select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
 	select TPL_NEEDS_SEPARATE_STACK if TPL
-	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_DRIVERS_MISC
 	imply ROCKCHIP_COMMON_BOARD
 	imply SPL_SERIAL_SUPPORT
 	imply SPL_ROCKCHIP_COMMON_BOARD
@ -108,7 +108,7 @@ config ROCKCHIP_RK3288
 	imply SPL_ROCKCHIP_COMMON_BOARD
 	imply TPL_CLK
 	imply TPL_DM
-	imply TPL_DRIVERS_MISC_SUPPORT
+	imply TPL_DRIVERS_MISC
 	imply TPL_LIBCOMMON_SUPPORT
 	imply TPL_LIBGENERIC_SUPPORT
 	imply TPL_NEEDS_SEPARATE_TEXT_BASE
@ -219,7 +219,7 @@ config ROCKCHIP_RK3399
 	select TPL_NEEDS_SEPARATE_STACK if TPL
 	select SPL_SEPARATE_BSS
 	select SPL_SERIAL_SUPPORT
-	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_DRIVERS_MISC
 	select CLK
 	select FIT
 	select PINCTRL
@ -238,7 +238,7 @@ config ROCKCHIP_RK3399
 	imply TPL_LIBCOMMON_SUPPORT
 	imply TPL_LIBGENERIC_SUPPORT
 	imply TPL_SYS_MALLOC_SIMPLE
-	imply TPL_DRIVERS_MISC_SUPPORT
+	imply TPL_DRIVERS_MISC
 	imply TPL_OF_CONTROL
 	imply TPL_DM
 	imply TPL_REGMAP
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@ -154,7 +154,7 @@ config SYS_SOC
 config SYS_MALLOC_F_LEN
 	default 0x2000

-config SPL_DRIVERS_MISC_SUPPORT
+config SPL_DRIVERS_MISC
 	default y

 config SPL_LIBCOMMON_SUPPORT
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@ -218,7 +218,7 @@ void spl_perform_fixups(struct spl_image_info *spl_image)
 			   "u-boot,spl-boot-device", boot_ofpath);
 }

-#if defined(SPL_GPIO_SUPPORT)
+#if defined(SPL_GPIO)
 static void rk3399_force_power_on_reset(void)
 {
 	ofnode node;
@ -250,7 +250,7 @@ void spl_board_init(void)
 {
 	led_setup();

-#if defined(SPL_GPIO_SUPPORT)
+#if defined(SPL_GPIO)
 	struct rockchip_cru *cru = rockchip_get_cru();

 	/*
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@ -31,8 +31,8 @@ config STM32F7
 	select SPL_DM
 	select SPL_DM_RESET
 	select SPL_DM_SEQ_ALIAS
-	select SPL_DRIVERS_MISC_SUPPORT
-	select SPL_GPIO_SUPPORT
+	select SPL_DRIVERS_MISC
+	select SPL_GPIO
 	select SPL_LIBCOMMON_SUPPORT
 	select SPL_LIBGENERIC_SUPPORT
 	select SPL_MTD_SUPPORT
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@ -5,9 +5,9 @@ config SPL
 	select SPL_CLK
 	select SPL_DM
 	select SPL_DM_SEQ_ALIAS
-	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_DRIVERS_MISC
 	select SPL_FRAMEWORK
-	select SPL_GPIO_SUPPORT
+	select SPL_GPIO
 	select SPL_LIBCOMMON_SUPPORT
 	select SPL_LIBGENERIC_SUPPORT
 	select SPL_OF_CONTROL
@ -17,7 +17,7 @@ config SPL
 	select SPL_DM_RESET
 	select SPL_SERIAL_SUPPORT
 	select SPL_SYSCON
-	select SPL_WATCHDOG_SUPPORT if WATCHDOG
+	select SPL_WATCHDOG if WATCHDOG
 	imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
 	imply SPL_BOOTSTAGE if BOOTSTAGE
 	imply SPL_DISPLAY_PRINT
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@ -339,7 +339,7 @@ void board_init_f(ulong dummy)
 	spl_init();
 	preloader_console_init();

-#ifdef CONFIG_SPL_I2C_SUPPORT
+#ifdef CONFIG_SPL_I2C
 	/* Needed early by sunxi_board_init if PMU is enabled */
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@ -1,6 +1,6 @@
 if ARCH_TEGRA

-config SPL_GPIO_SUPPORT
+config SPL_GPIO
 	default y

 config SPL_LIBCOMMON_SUPPORT
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@ -122,7 +122,7 @@ config MPC83XX_SDHC_SUPPORT
 config MPC83XX_SATA_SUPPORT
 	bool

-config MPC83XX_SECOND_I2C_SUPPORT
+config MPC83XX_SECOND_I2C
 	bool

 config MPC83XX_LDP_PIN
@ -138,14 +138,14 @@ config ARCH_MPC8308
 	select MPC83XX_TSEC1_SUPPORT
 	select MPC83XX_TSEC2_SUPPORT
 	select MPC83XX_PCIE1_SUPPORT
-	select MPC83XX_SECOND_I2C_SUPPORT
+	select MPC83XX_SECOND_I2C

 config ARCH_MPC8309
 	bool
 	select ARCH_MPC830X
 	select MPC83XX_QUICC_ENGINE
 	select MPC83XX_PCI_SUPPORT
-	select MPC83XX_SECOND_I2C_SUPPORT
+	select MPC83XX_SECOND_I2C
 	select SYS_FSL_ERRATUM_ESDHC111
 	select FSL_ELBC

@ -158,7 +158,7 @@ config ARCH_MPC831X
 config ARCH_MPC8313
 	bool
 	select ARCH_MPC831X
-	select MPC83XX_SECOND_I2C_SUPPORT
+	select MPC83XX_SECOND_I2C
 	select FSL_ELBC

 config ARCH_MPC832X
@ -176,14 +176,14 @@ config ARCH_MPC8349
 	select MPC83XX_TSEC1_SUPPORT
 	select MPC83XX_TSEC2_SUPPORT
 	select MPC83XX_LDP_PIN
-	select MPC83XX_SECOND_I2C_SUPPORT
+	select MPC83XX_SECOND_I2C

 config ARCH_MPC8360
 	bool
 	select MPC83XX_QUICC_ENGINE
 	select MPC83XX_PCI_SUPPORT
 	select MPC83XX_LDP_PIN
-	select MPC83XX_SECOND_I2C_SUPPORT
+	select MPC83XX_SECOND_I2C

 config ARCH_MPC837X
 	bool
@ -195,7 +195,7 @@ config ARCH_MPC837X
 	select MPC83XX_SDHC_SUPPORT
 	select MPC83XX_SATA_SUPPORT
 	select MPC83XX_LDP_PIN
-	select MPC83XX_SECOND_I2C_SUPPORT
+	select MPC83XX_SECOND_I2C
 	select FSL_ELBC

 config SYS_IMMR
--- a/arch/riscv/cpu/fu740/Kconfig
+++ b/arch/riscv/cpu/fu740/Kconfig
@ -37,4 +37,4 @@ config SIFIVE_FU740
 	imply PWM_SIFIVE
 	imply DM_I2C
 	imply SYS_I2C_OCORES
-	imply SPL_I2C_SUPPORT
+	imply SPL_I2C
--- a/board/Arcturus/ucp1020/spl.c
+++ b/board/Arcturus/ucp1020/spl.c
@ -106,7 +106,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	env_relocate();
 #endif

-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 	i2c_init_all();
 #else
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
--- a/board/compulab/common/Makefile
+++ b/board/compulab/common/Makefile
@ -5,6 +5,6 @@
 # Author: Igor Grinberg <grinberg@compulab.co.il>

 obj-y				+= common.o
-obj-$(CONFIG_SYS_I2C)		+= eeprom.o
+obj-$(CONFIG_SYS_I2C_LEGACY)		+= eeprom.o
 obj-$(CONFIG_LCD)		+= omap3_display.o
 obj-$(CONFIG_SMC911X)		+= omap3_smc911x.o
--- a/board/compulab/common/eeprom.h
+++ b/board/compulab/common/eeprom.h
@ -10,7 +10,7 @@
 #define _EEPROM_
 #include <errno.h>

-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus);
 u32 cl_eeprom_get_board_rev(uint eeprom_bus);
 int cl_eeprom_get_product_name(uchar *buf, uint eeprom_bus);
--- a/board/engicam/stm32mp1/spl.c
+++ b/board/engicam/stm32mp1/spl.c
@ -13,7 +13,7 @@ static u32 opp_voltage_mv __section(".data");

 void board_vddcore_init(u32 voltage_mv)
 {
-	if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER_SUPPORT))
+	if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER))
 		opp_voltage_mv = voltage_mv;
 }

--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@ -213,7 +213,7 @@ void board_init_f(ulong dummy)

 	preloader_console_init();

-#ifdef CONFIG_SPL_I2C_SUPPORT
+#ifdef CONFIG_SPL_I2C
 	i2c_init_all();
 #endif

--- a/board/freescale/p1_p2_rdb_pc/spl.c
+++ b/board/freescale/p1_p2_rdb_pc/spl.c
@ -99,7 +99,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	env_relocate();
 #endif

-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 	i2c_init_all();
 #else
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
--- a/board/phytec/phycore_rk3288/phycore-rk3288.c
+++ b/board/phytec/phycore_rk3288/phycore-rk3288.c
@ -89,7 +89,7 @@ static int phycore_init(void)
 	if (ret)
 		return ret;

-#if defined(CONFIG_SPL_POWER_SUPPORT)
+#if defined(CONFIG_SPL_POWER)
 	/* Increase USB input current to 2A */
 	ret = rk818_spl_configure_usb_input_current(pmic, 2000);
 	if (ret)
--- a/board/renesas/draak/draak.c
+++ b/board/renesas/draak/draak.c
@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;

 int board_early_init_f(void)
 {
-#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
+#if defined(CONFIG_SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
 	/* DVFS for reset */
 	mstp_clrbits_le32(SMSTPCR9, SMSTPCR9, DVFS_MSTP926);
 #endif
--- a/board/renesas/salvator-x/salvator-x.c
+++ b/board/renesas/salvator-x/salvator-x.c
@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;

 int board_early_init_f(void)
 {
-#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
+#if defined(CONFIG_SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
 	/* DVFS for reset */
 	mstp_clrbits_le32(SMSTPCR9, SMSTPCR9, DVFS_MSTP926);
 #endif
@ -78,7 +78,7 @@ int board_init(void)

 void reset_cpu(void)
 {
-#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
+#if defined(CONFIG_SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
 	i2c_reg_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x20, 0x80);
 #else
 	/* only CA57 ? */
--- a/board/renesas/ulcb/ulcb.c
+++ b/board/renesas/ulcb/ulcb.c
@ -35,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR;

 int board_early_init_f(void)
 {
-#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH)
+#if defined(CONFIG_SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
 	/* DVFS for reset */
 	mstp_clrbits_le32(SMSTPCR9, SMSTPCR9, DVFS_MSTP926);
 #endif
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@ -288,7 +288,7 @@ int board_late_init(void)
 #endif

 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))
 static void cpsw_control(int enabled)
 {
 	/* VTP can be added here */
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@ -171,7 +171,7 @@ int read_eeprom(void)
 }

 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))
 static void cpsw_control(int enabled)
 {
 	/* VTP can be added here */
@ -220,7 +220,7 @@ int board_eth_init(struct bd_info *bis)
 {
 	int n = 0;
 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))
 	struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 #ifdef CONFIG_FACTORYSET
 	int rv;
--- a/board/somlabs/visionsom-6ull/visionsom-6ull.c
+++ b/board/somlabs/visionsom-6ull/visionsom-6ull.c
@ -104,7 +104,7 @@ int board_init(void)
 	/* Address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 #endif

--- a/board/st/stm32mp1/spl.c
+++ b/board/st/stm32mp1/spl.c
@ -17,13 +17,13 @@ static u32 opp_voltage_mv __section(".data");

 void board_vddcore_init(u32 voltage_mv)
 {
-	if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER_SUPPORT))
+	if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER))
 		opp_voltage_mv = voltage_mv;
 }

 int board_early_init_f(void)
 {
-	if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER_SUPPORT))
+	if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER))
 		stpmic1_init(opp_voltage_mv);

 	return 0;
--- a/board/tcl/sl50/board.c
+++ b/board/tcl/sl50/board.c
@ -250,7 +250,7 @@ int board_late_init(void)
 #endif

 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))
 static void cpsw_control(int enabled)
 {
 	/* VTP can be added here */
@ -302,7 +302,7 @@ static struct cpsw_platform_data cpsw_data = {
 * Build in only these cases to avoid warnings about unused variables
 * when we build an SPL that has neither option but full U-Boot will.
 */
-#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER)) \
+#if ((defined(CONFIG_SPL_ETH) || defined(CONFIG_SPL_USB_ETHER)) \
 		&& defined(CONFIG_SPL_BUILD)) || \
 	((defined(CONFIG_DRIVER_TI_CPSW) || \
 	  defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
@ -324,7 +324,7 @@ int board_eth_init(struct bd_info *bis)
 	mac_addr[5] = (mac_lo & 0xFF00) >> 8;

 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))
 	if (!env_get("ethaddr")) {
 		printf("<ethaddr> not set. Validating first E-fuse MAC\n");

--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@ -588,7 +588,7 @@ void sdram_init(void)
 #endif

 #if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_SPL_BUILD) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)))
 static void request_and_set_gpio(int gpio, char *name, int val)
 {
 	int ret;
@ -724,7 +724,7 @@ int board_init(void)
 #endif

 #if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_SPL_BUILD) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)))
 	if (board_is_icev2()) {
 		int rv;
 		u32 reg;
--- a/board/tqc/tqma6/tqma6.c
+++ b/board/tqc/tqma6/tqma6.c
@ -171,7 +171,7 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs)
 #endif
 #endif

-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 static struct i2c_pads_info tqma6_i2c3_pads = {
 	/* I2C3: on board LM75, M24C64,  */
 	.scl = {
@ -216,7 +216,7 @@ int board_init(void)
 #ifndef CONFIG_DM_SPI
 	tqma6_iomuxc_spi();
 #endif
-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 	tqma6_setup_i2c();
 #endif

--- a/board/vscom/baltos/board.c
+++ b/board/vscom/baltos/board.c
@ -379,7 +379,7 @@ int board_late_init(void)
 #endif

 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))
 static void cpsw_control(int enabled)
 {
 	/* VTP can be added here */
@ -421,7 +421,7 @@ static struct cpsw_platform_data cpsw_data = {
 };
 #endif

-#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER)) \
+#if ((defined(CONFIG_SPL_ETH) || defined(CONFIG_SPL_USB_ETHER)) \
 		&& defined(CONFIG_SPL_BUILD)) || \
 	((defined(CONFIG_DRIVER_TI_CPSW) || \
 	  defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \
@ -450,7 +450,7 @@ int board_eth_init(struct bd_info *bis)
 	mac_addr[5] = (mac_lo & 0xFF00) >> 8;

 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	(defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))
 	if (!env_get("ethaddr")) {
 		printf("<ethaddr> not set. Validating first E-fuse MAC\n");

--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@ -167,7 +167,7 @@ config CMD_TLV_EEPROM
 config SPL_CMD_TLV_EEPROM
 	bool "tlv_eeprom for SPL"
 	depends on SPL_I2C_EEPROM
-	select SPL_DRIVERS_MISC_SUPPORT
+	select SPL_DRIVERS_MISC
 	help
 	  Read system EEPROM data block in ONIE Tlvinfo format from SPL.

--- a/cmd/date.c
+++ b/cmd/date.c
@ -46,7 +46,7 @@ static int do_date(struct cmd_tbl *cmdtp, int flag, int argc,
 		printf("Cannot find RTC: err=%d\n", rcode);
 		return CMD_RET_FAILURE;
 	}
-#elif defined(CONFIG_SYS_I2C)
+#elif defined(CONFIG_SYS_I2C_LEGACY)
 	old_bus = i2c_get_bus_num();
 	i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
 #else
@ -119,7 +119,7 @@ static int do_date(struct cmd_tbl *cmdtp, int flag, int argc,
 	}

 	/* switch back to original I2C bus */
-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 	i2c_set_bus_num(old_bus);
 #elif !defined(CONFIG_DM_RTC)
 	I2C_SET_BUS(old_bus);
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@ -75,7 +75,7 @@ void eeprom_init(int bus)
 	/* I2C EEPROM */
 #if CONFIG_IS_ENABLED(DM_I2C)
 	eeprom_i2c_bus = bus;
-#elif defined(CONFIG_SYS_I2C)
+#elif defined(CONFIG_SYS_I2C_LEGACY)
 	if (bus >= 0)
 		i2c_set_bus_num(bus);
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@ -98,7 +98,7 @@ static uint	i2c_mm_last_alen;
 * pairs.  The following macros take care of this */

 #if defined(CONFIG_SYS_I2C_NOPROBES)
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS)
 static struct
 {
 	uchar	bus;
@ -114,7 +114,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
 #define COMPARE_BUS(b,i)	((b) == 0)	/* Make compiler happy */
 #define COMPARE_ADDR(a,i)	(i2c_no_probes[(i)] == (a))
 #define NO_PROBE_ADDR(i)	i2c_no_probes[(i)]
-#endif	/* defined(CONFIG_SYS_I2C) */
+#endif	/* defined(CONFIG_SYS_I2C_LEGACY) */
 #endif

 #define DISP_LINE_LEN	16
@ -209,7 +209,7 @@ void i2c_init_board(void)
 *
 * Returns I2C bus speed in Hz.
 */
-#if !defined(CONFIG_SYS_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
+#if !defined(CONFIG_SYS_I2C_LEGACY) && !CONFIG_IS_ENABLED(DM_I2C)
 /*
 * TODO: Implement architecture-specific get/set functions
 * Should go away, if we switched completely to new multibus support
@ -1725,7 +1725,7 @@ static void show_bus(struct udevice *bus)
 *
 * Returns zero always.
 */
-#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
 			   char *const argv[])
 {
@ -1811,7 +1811,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
 * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
 * on error.
 */
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \
+#if defined(CONFIG_SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) || \
 		CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
 			  char *const argv[])
@ -1834,7 +1834,7 @@ static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
 		printf("Current bus is %d\n", bus_no);
 	} else {
 		bus_no = simple_strtoul(argv[1], NULL, 10);
-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY)
 		if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
 			printf("Invalid bus %d\n", bus_no);
 			return -1;
@ -1852,7 +1852,7 @@ static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,

 	return ret ? CMD_RET_FAILURE : 0;
 }
-#endif  /* defined(CONFIG_SYS_I2C) */
+#endif  /* defined(CONFIG_SYS_I2C_LEGACY) */

 /**
 * do_i2c_bus_speed() - Handle the "i2c speed" command-line command
@ -1951,7 +1951,7 @@ static int do_i2c_reset(struct cmd_tbl *cmdtp, int flag, int argc,
 		printf("Error: Not supported by the driver\n");
 		return CMD_RET_FAILURE;
 	}
-#elif defined(CONFIG_SYS_I2C)
+#elif defined(CONFIG_SYS_I2C_LEGACY)
 	i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
 #else
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@ -1960,11 +1960,11 @@ static int do_i2c_reset(struct cmd_tbl *cmdtp, int flag, int argc,
 }

 static struct cmd_tbl cmd_i2c_sub[] = {
-#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 	U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
 #endif
 	U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if defined(CONFIG_SYS_I2C) || \
+#if defined(CONFIG_SYS_I2C_LEGACY) || \
 	defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
 	U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
 #endif  /* CONFIG_I2C_MULTI_BUS */
@ -2036,12 +2036,12 @@ static int do_i2c(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 /***************************************************/
 #ifdef CONFIG_SYS_LONGHELP
 static char i2c_help_text[] =
-#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 	"bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
 	"i2c " /* That's the prefix for the crc32 command below. */
 #endif
 	"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if defined(CONFIG_SYS_I2C) || \
+#if defined(CONFIG_SYS_I2C_LEGACY) || \
 	defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
 	"i2c dev [dev] - show or set current I2C bus\n"
 #endif  /* CONFIG_I2C_MULTI_BUS */
--- a/common/Kconfig.boot
+++ b/common/Kconfig.boot
@ -184,7 +184,7 @@ config SPL_FIT_SIGNATURE
 	depends on SPL_LOAD_FIT || SPL_LOAD_FIT_FULL
 	select FIT_SIGNATURE
 	select SPL_FIT
-	select SPL_CRYPTO_SUPPORT
+	select SPL_CRYPTO
 	select SPL_HASH_SUPPORT
 	select SPL_RSA
 	select SPL_RSA_VERIFY
--- a/common/Makefile
+++ b/common/Makefile
@ -72,7 +72,7 @@ obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
 obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o

-ifdef CONFIG_SPL_USB_HOST_SUPPORT
+ifdef CONFIG_SPL_USB_HOST
 obj-y += usb.o
 obj-y += usb_hub.o
 obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
--- a/common/board_f.c
+++ b/common/board_f.c
@ -244,7 +244,7 @@ __weak int dram_init_banksize(void)
 	return 0;
 }

-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY)
 static int init_func_i2c(void)
 {
 	puts("I2C:   ");
@ -871,7 +871,7 @@ static const init_fnc_t init_sequence_f[] = {
 	misc_init_f,
 #endif
 	INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY)
 	init_func_i2c,
 #endif
 #if defined(CONFIG_VID) && !defined(CONFIG_SPL)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@ -511,7 +511,7 @@ config SPL_CPU
 	  may improve boot performance. Enable this option to build the
 	  drivers in drivers/cpu as part of an SPL build.

-config SPL_CRYPTO_SUPPORT
+config SPL_CRYPTO
 	bool "Support crypto drivers"
 	help
 	  Enable crypto drivers in SPL. These drivers can be used to
@ -548,7 +548,7 @@ config SPL_DMA
 	  the CPU moving the data. Enable this option to build the drivers
 	  in drivers/dma as part of an SPL build.

-config SPL_DRIVERS_MISC_SUPPORT
+config SPL_DRIVERS_MISC
 	bool "Support misc drivers"
 	help
 	  Enable miscellaneous drivers in SPL. These drivers perform various
@ -582,7 +582,7 @@ config SPL_SAVEENV
 	  "reboot_image" and act accordingly and change the reboot_image
 	  to default mode using setenv and save the environment.

-config SPL_ETH_SUPPORT
+config SPL_ETH
 	bool "Support Ethernet"
 	depends on SPL_ENV_SUPPORT
 	help
@ -636,7 +636,7 @@ config SPL_FPGA
 	  as early as possible during boot, and this option can enable that
 	  within SPL.

-config SPL_GPIO_SUPPORT
+config SPL_GPIO
 	bool "Support GPIO in SPL"
 	help
 	  Enable support for GPIOs (General-purpose Input/Output) in SPL.
@ -647,7 +647,7 @@ config SPL_GPIO_SUPPORT
 	  for example. Enable this option to build the drivers in
 	  drivers/gpio as part of an SPL build.

-config SPL_I2C_SUPPORT
+config SPL_I2C
 	bool "Support I2C"
 	help
 	  Enable support for the I2C (Inter-Integrated Circuit) bus in SPL.
@ -761,7 +761,7 @@ config SPL_MTD_SUPPORT
 	  devices. See SPL_NAND_SUPPORT and SPL_ONENAND_SUPPORT for how
 	  to enable specific MTD drivers.

-config SPL_MUSB_NEW_SUPPORT
+config SPL_MUSB_NEW
 	bool "Support new Mentor Graphics USB"
 	help
 	  Enable support for Mentor Graphics USB in SPL. This is a new
@ -926,7 +926,7 @@ config SPL_NET_SUPPORT
 	  This permits SPL to load U-Boot over a network link rather than
 	  from an on-board peripheral. Environment support is required since
 	  the network stack uses a number of environment variables. See also
-	  SPL_ETH_SUPPORT.
+	  SPL_ETH.

 if SPL_NET_SUPPORT
 config SPL_NET_VCI_STRING
@ -1034,7 +1034,7 @@ config SPL_DM_RESET
 	  by using the generic reset API provided by driver model.
 	  This enables the drivers in drivers/reset as part of an SPL build.

-config SPL_POWER_SUPPORT
+config SPL_POWER
 	bool "Support power drivers"
 	help
 	  Enable support for power control in SPL. This includes support
@ -1192,7 +1192,7 @@ config SPL_THERMAL
 	  automatic power-off when the temperature gets too high or low. Other
 	  devices may be discrete but connected on a suitable bus.

-config SPL_USB_HOST_SUPPORT
+config SPL_USB_HOST
 	bool "Support USB host drivers"
 	select HAVE_BLOCK_DEVICE
 	help
@ -1205,7 +1205,7 @@ config SPL_USB_HOST_SUPPORT

 config SPL_USB_STORAGE
 	bool "Support loading from USB"
-	depends on SPL_USB_HOST_SUPPORT && !(BLK && !DM_USB)
+	depends on SPL_USB_HOST && !(BLK && !DM_USB)
 	help
 	  Enable support for USB devices in SPL. This allows use of USB
 	  devices such as hard drives and flash drivers for loading U-Boot.
@ -1229,7 +1229,7 @@ config SPL_USB_ETHER
 	  USB-connected Ethernet link (such as a USB Ethernet dongle) rather
 	  than from an onboard peripheral. Environment support is required
 	  since the network stack uses a number of environment variables.
-	  See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT.
+	  See also SPL_NET_SUPPORT and SPL_ETH.

 config SPL_DFU
 	bool "Support DFU (Device Firmware Upgrade)"
@ -1275,7 +1275,7 @@ config SPL_SDP_USB_DEV
 	  so it can be used in compiled environment.
 endif

-config SPL_WATCHDOG_SUPPORT
+config SPL_WATCHDOG
 	bool "Support watchdog drivers"
 	imply SPL_WDT if !HW_WATCHDOG
 	help
@ -1477,7 +1477,7 @@ config TPL_BOOTROM_SUPPORT
 	  BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the
 	  boot device list, if not implemented for a given board)

-config TPL_DRIVERS_MISC_SUPPORT
+config TPL_DRIVERS_MISC
 	bool "Support misc drivers in TPL"
 	help
 	  Enable miscellaneous drivers in TPL. These drivers perform various
@ -1490,7 +1490,7 @@ config TPL_ENV_SUPPORT
 	help
 	  Enable environment support in TPL. See SPL_ENV_SUPPORT for details.

-config TPL_GPIO_SUPPORT
+config TPL_GPIO
 	bool "Support GPIO in TPL"
 	help
 	  Enable support for GPIOs (General-purpose Input/Output) in TPL.
@ -1501,10 +1501,10 @@ config TPL_GPIO_SUPPORT
 	  for example. Enable this option to build the drivers in
 	  drivers/gpio as part of an TPL build.

-config TPL_I2C_SUPPORT
+config TPL_I2C
 	bool "Support I2C"
 	help
-	  Enable support for the I2C bus in TPL. See SPL_I2C_SUPPORT for
+	  Enable support for the I2C bus in TPL. See SPL_I2C for
 	  details.

 config TPL_LIBCOMMON_SUPPORT
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@ -707,7 +707,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 	spl_board_init();
 #endif

-#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) && CONFIG_IS_ENABLED(WDT)
+#if defined(CONFIG_SPL_WATCHDOG) && CONFIG_IS_ENABLED(WDT)
 	initr_watchdog();
 #endif

--- a/common/spl/spl_net.c
+++ b/common/spl/spl_net.c
@ -15,7 +15,7 @@
 #include <net.h>
 #include <linux/libfdt.h>

-#if defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER)
+#if defined(CONFIG_SPL_ETH) || defined(CONFIG_SPL_USB_ETHER)
 static ulong spl_net_load_read(struct spl_load_info *load, ulong sector,
 			       ulong count, void *buf)
 {
@ -69,7 +69,7 @@ static int spl_net_load_image(struct spl_image_info *spl_image,
 }
 #endif

-#ifdef CONFIG_SPL_ETH_SUPPORT
+#ifdef CONFIG_SPL_ETH
 int spl_net_load_image_cpgmac(struct spl_image_info *spl_image,
 			      struct spl_boot_device *bootdev)
 {
--- a/common/stdio.c
+++ b/common/stdio.c
@ -336,7 +336,7 @@ int stdio_add_devices(void)
 				       dev->name);
 		}
 	}
-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
 	i2c_init_all();
 #endif
 	if (IS_ENABLED(CONFIG_DM_VIDEO)) {
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@ -11,7 +11,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@ -9,7 +9,7 @@ CONFIG_MMC1_CD_PIN="PG13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_AXP152_POWER=y
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@ -15,7 +15,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_DFU_RAM=y
--- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@ -13,7 +13,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_SPL_SPI_SUNXI=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_SCSI_AHCI=y
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@ -11,7 +11,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_SCSI_AHCI=y
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@ -9,7 +9,7 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig
+++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig
@ -11,7 +11,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@ -12,7 +12,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/A20-Olimex-SOM-EVB_defconfig
+++ b/configs/A20-Olimex-SOM-EVB_defconfig
@ -13,7 +13,7 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
--- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
+++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
@ -13,7 +13,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_PHY_ADDR=3
--- a/configs/A20-Olimex-SOM204-EVB_defconfig
+++ b/configs/A20-Olimex-SOM204-EVB_defconfig
@ -12,7 +12,7 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_PHY_ADDR=3
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@ -14,5 +14,5 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_USB_MUSB_HOST=y
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@ -15,6 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
--- a/configs/Auxtek-T003_defconfig
+++ b/configs/Auxtek-T003_defconfig
@ -8,7 +8,7 @@ CONFIG_DRAM_EMR1=0
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_AXP152_POWER=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@ -6,7 +6,7 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PG13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_AXP152_POWER=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
--- a/configs/Bananapi_M2_Ultra_defconfig
+++ b/configs/Bananapi_M2_Ultra_defconfig
@ -11,7 +11,7 @@ CONFIG_USB1_VBUS_PIN="PH23"
 CONFIG_USB2_VBUS_PIN="PH23"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_RGMII=y
 CONFIG_SUN8I_EMAC=y
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@ -9,7 +9,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@ -11,7 +11,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
--- a/configs/CHIP_defconfig
+++ b/configs/CHIP_defconfig
@ -7,7 +7,7 @@ CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_CHIP_DIP_SCAN=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_DFU_RAM=y
 # CONFIG_MMC is not set
--- a/configs/CHIP_pro_defconfig
+++ b/configs/CHIP_pro_defconfig
@ -5,7 +5,7 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@ -14,7 +14,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_VIDEO_LCD_SPI_CS="PA0"
 CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@ -8,7 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@ -8,7 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@ -13,7 +13,7 @@ CONFIG_SATAPWR="PH12"
 CONFIG_GMAC_TX_DELAY=1
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_SCSI_AHCI=y
--- a/configs/Empire_electronix_d709_defconfig
+++ b/configs/Empire_electronix_d709_defconfig
@ -16,6 +16,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
--- a/configs/Empire_electronix_m712_defconfig
+++ b/configs/Empire_electronix_m712_defconfig
@ -15,6 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@ -15,5 +15,5 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_USB_MUSB_HOST=y
--- a/configs/Itead_Ibox_A20_defconfig
+++ b/configs/Itead_Ibox_A20_defconfig
@ -8,7 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/Lamobo_R1_defconfig
+++ b/configs/Lamobo_R1_defconfig
@ -10,7 +10,7 @@ CONFIG_SATAPWR="PB3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_B53_SWITCH=y
 CONFIG_B53_PHY_PORTS=0x1f
--- a/configs/Linksprite_pcDuino3_Nano_defconfig
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@ -10,7 +10,7 @@ CONFIG_SATAPWR="PH2"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@ -8,7 +8,7 @@ CONFIG_DRAM_ZQ=122
 CONFIG_SATAPWR="PH2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@ -6,7 +6,7 @@ CONFIG_MACH_SUN4I=y
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
--- a/configs/MK808C_defconfig
+++ b/configs/MK808C_defconfig
@ -5,6 +5,6 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
--- a/configs/MSI_Primo73_defconfig
+++ b/configs/MSI_Primo73_defconfig
@ -10,4 +10,4 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@ -8,7 +8,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@ -9,7 +9,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
--- a/configs/Mele_M5_defconfig
+++ b/configs/Mele_M5_defconfig
@ -9,7 +9,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@ -6,7 +6,7 @@ CONFIG_MACH_SUN4I=y
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
--- a/configs/Orangepi_defconfig
+++ b/configs/Orangepi_defconfig
@ -12,7 +12,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/Orangepi_mini_defconfig
+++ b/configs/Orangepi_mini_defconfig
@ -14,7 +14,7 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
--- a/configs/P1010RDB-PA_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig
@ -7,7 +7,7 @@ CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PA=y
@ -26,9 +26,9 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_NAND_BOOT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
-CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_TPL_DRIVERS_MISC=y
 CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
+CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_TPL_NAND_SUPPORT=y
 CONFIG_TPL_SERIAL_SUPPORT=y
--- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
@ -8,7 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
 CONFIG_SPL_TEXT_BASE=0xD0001000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PA=y
@ -25,7 +25,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MMC_BOOT=y
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
--- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa_36b"
 CONFIG_SPL_TEXT_BASE=0xD0001000
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
@ -27,7 +27,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_SPI_BOOT=y
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ b/configs/P1010RDB-PA_NAND_defconfig
@ -7,7 +7,7 @@ CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PA=y
@ -25,9 +25,9 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_NAND_BOOT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
-CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_TPL_DRIVERS_MISC=y
 CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
+CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_TPL_NAND_SUPPORT=y
 CONFIG_TPL_SERIAL_SUPPORT=y
--- a/configs/P1010RDB-PA_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_SDCARD_defconfig
@ -8,7 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
 CONFIG_SPL_TEXT_BASE=0xD0001000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PA=y
@ -24,7 +24,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MMC_BOOT=y
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
--- a/configs/P1010RDB-PA_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_SPIFLASH_defconfig
@ -8,7 +8,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
 CONFIG_SPL_TEXT_BASE=0xD0001000
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
@ -26,7 +26,7 @@ CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_SPI_BOOT=y
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
--- a/configs/P1010RDB-PB_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig
@ -7,7 +7,7 @@ CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PB=y
@ -26,9 +26,9 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_NAND_BOOT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
-CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_TPL_DRIVERS_MISC=y
 CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
+CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_TPL_NAND_SUPPORT=y
 CONFIG_TPL_SERIAL_SUPPORT=y
--- a/Show More
+++ b/Show More