diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile
index 128829a0079..db60e308c73 100644
--- a/arch/x86/cpu/broadwell/Makefile
+++ b/arch/x86/cpu/broadwell/Makefile
@@ -7,3 +7,4 @@
 obj-y += cpu.o
 obj-y += iobp.o
 obj-y += pch.o
+obj-y += pinctrl_broadwell.o
diff --git a/arch/x86/cpu/broadwell/pinctrl_broadwell.c b/arch/x86/cpu/broadwell/pinctrl_broadwell.c
new file mode 100644
index 00000000000..2a3fcedd0db
--- /dev/null
+++ b/arch/x86/cpu/broadwell/pinctrl_broadwell.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <pch.h>
+#include <pci.h>
+#include <asm/cpu.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/gpio.h>
+#include <dt-bindings/gpio/x86-gpio.h>
+#include <dm/pinctrl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+	MAX_GPIOS	= 95,
+};
+
+#define PIRQ_SHIFT	16
+#define CONF_MASK	0xffff
+
+struct pin_info {
+	int node;
+	int phandle;
+	bool mode_gpio;
+	bool dir_input;
+	bool invert;
+	bool trigger_level;
+	bool output_high;
+	bool sense_disable;
+	bool owner_gpio;
+	bool route_smi;
+	bool irq_enable;
+	bool reset_rsmrst;
+	bool pirq_apic_route;
+};
+
+static int broadwell_pinctrl_read_configs(struct udevice *dev,
+					  struct pin_info *conf, int max_pins)
+{
+	const void *blob = gd->fdt_blob;
+	int count = 0;
+	int node;
+
+	debug("%s: starting\n", __func__);
+	for (node = fdt_first_subnode(blob, dev->of_offset);
+	     node > 0;
+	     node = fdt_next_subnode(blob, node)) {
+		int phandle = fdt_get_phandle(blob, node);
+
+		if (!phandle)
+			continue;
+		if (count == max_pins)
+			return -ENOSPC;
+
+		/* We've found a new configuration */
+		memset(conf, '\0', sizeof(*conf));
+		conf->node = node;
+		conf->phandle = phandle;
+		conf->mode_gpio = fdtdec_get_bool(blob, node, "mode-gpio");
+		if (fdtdec_get_int(blob, node, "direction", -1) == PIN_INPUT)
+			conf->dir_input = true;
+		conf->invert = fdtdec_get_bool(blob, node, "invert");
+		if (fdtdec_get_int(blob, node, "trigger", -1) == TRIGGER_LEVEL)
+			conf->trigger_level = true;
+		if (fdtdec_get_int(blob, node, "output-value", -1) == 1)
+			conf->output_high = true;
+		conf->sense_disable = fdtdec_get_bool(blob, node,
+						      "sense-disable");
+		if (fdtdec_get_int(blob, node, "owner", -1) == OWNER_GPIO)
+			conf->owner_gpio = true;
+		if (fdtdec_get_int(blob, node, "route", -1) == ROUTE_SMI)
+			conf->route_smi = true;
+		conf->irq_enable = fdtdec_get_bool(blob, node, "irq-enable");
+		conf->reset_rsmrst = fdtdec_get_bool(blob, node,
+						     "reset-rsmrst");
+		if (fdtdec_get_int(blob, node, "pirq-apic", -1) ==
+				PIRQ_APIC_ROUTE)
+			conf->pirq_apic_route = true;
+		debug("config: phandle=%d\n", phandle);
+		count++;
+		conf++;
+	}
+	debug("%s: Found %d configurations\n", __func__, count);
+
+	return count;
+}
+
+static int broadwell_pinctrl_lookup_phandle(struct pin_info *conf,
+					    int conf_count, int phandle)
+{
+	int i;
+
+	for (i = 0; i < conf_count; i++) {
+		if (conf[i].phandle == phandle)
+			return i;
+	}
+
+	return -ENOENT;
+}
+
+static int broadwell_pinctrl_read_pins(struct udevice *dev,
+		struct pin_info *conf, int conf_count, int gpio_conf[],
+		int num_gpios)
+{
+	const void *blob = gd->fdt_blob;
+	int count = 0;
+	int node;
+
+	for (node = fdt_first_subnode(blob, dev->of_offset);
+	     node > 0;
+	     node = fdt_next_subnode(blob, node)) {
+		int len, i;
+		const u32 *prop = fdt_getprop(blob, node, "config", &len);
+
+		if (!prop)
+			continue;
+
+		/* There are three cells per pin */
+		count = len / (sizeof(u32) * 3);
+		debug("Found %d GPIOs to configure\n", count);
+		for (i = 0; i < count; i++) {
+			uint gpio = fdt32_to_cpu(prop[i * 3]);
+			uint phandle = fdt32_to_cpu(prop[i * 3 + 1]);
+			int val;
+
+			if (gpio >= num_gpios) {
+				debug("%s: GPIO %d out of range\n", __func__,
+				      gpio);
+				return -EDOM;
+			}
+			val = broadwell_pinctrl_lookup_phandle(conf, conf_count,
+							       phandle);
+			if (val < 0) {
+				debug("%s: Cannot find phandle %d\n", __func__,
+				      phandle);
+				return -EINVAL;
+			}
+			gpio_conf[gpio] = val |
+				fdt32_to_cpu(prop[i * 3 + 2]) << PIRQ_SHIFT;
+		}
+	}
+
+	return 0;
+}
+
+static void broadwell_pinctrl_commit(struct pch_lp_gpio_regs *regs,
+				     struct pin_info *pin_info,
+				     int gpio_conf[], int count)
+{
+	u32 owner_gpio[GPIO_BANKS] = {0};
+	u32 route_smi[GPIO_BANKS] = {0};
+	u32 irq_enable[GPIO_BANKS] = {0};
+	u32 reset_rsmrst[GPIO_BANKS] = {0};
+	u32 pirq2apic = 0;
+	int set, bit, gpio = 0;
+
+	for (gpio = 0; gpio < MAX_GPIOS; gpio++) {
+		int confnum = gpio_conf[gpio] & CONF_MASK;
+		struct pin_info *pin = &pin_info[confnum];
+		u32 val;
+
+		val = pin->mode_gpio << CONFA_MODE_SHIFT |
+			pin->dir_input << CONFA_DIR_SHIFT |
+			pin->invert << CONFA_INVERT_SHIFT |
+			pin->trigger_level << CONFA_TRIGGER_SHIFT |
+			pin->output_high << CONFA_OUTPUT_SHIFT;
+		outl(val, &regs->config[gpio].conf_a);
+		outl(pin->sense_disable << CONFB_SENSE_SHIFT,
+		     &regs->config[gpio].conf_b);
+
+		/* Determine set and bit based on GPIO number */
+		set = gpio / GPIO_PER_BANK;
+		bit = gpio % GPIO_PER_BANK;
+
+		/* Apply settings to set specific bits */
+		owner_gpio[set] |= pin->owner_gpio << bit;
+		route_smi[set] |= pin->route_smi << bit;
+		irq_enable[set] |= pin->irq_enable << bit;
+		reset_rsmrst[set] |= pin->reset_rsmrst << bit;
+
+		/* PIRQ to IO-APIC map */
+		if (pin->pirq_apic_route)
+			pirq2apic |= gpio_conf[gpio] >> PIRQ_SHIFT;
+		debug("gpio %d: conf %d, mode_gpio %d, dir_input %d, output_high %d\n",
+		      gpio, confnum, pin->mode_gpio, pin->dir_input,
+		      pin->output_high);
+	}
+
+	for (set = 0; set < GPIO_BANKS; set++) {
+		outl(owner_gpio[set], &regs->own[set]);
+		outl(route_smi[set], &regs->gpi_route[set]);
+		outl(irq_enable[set], &regs->gpi_ie[set]);
+		outl(reset_rsmrst[set], &regs->rst_sel[set]);
+	}
+
+	outl(pirq2apic, &regs->pirq_to_ioxapic);
+}
+
+static int broadwell_pinctrl_probe(struct udevice *dev)
+{
+	struct pch_lp_gpio_regs *regs;
+	struct pin_info conf[12];
+	int gpio_conf[MAX_GPIOS];
+	struct udevice *pch;
+	int conf_count;
+	u32 gpiobase;
+	int ret;
+
+	ret = uclass_first_device(UCLASS_PCH, &pch);
+	if (ret)
+		return ret;
+	if (!pch)
+		return -ENODEV;
+	debug("%s: start\n", __func__);
+
+	/* Only init once, before relocation */
+	if (gd->flags & GD_FLG_RELOC)
+		return 0;
+
+	/*
+	 * Get the memory/io base address to configure every pins.
+	 * IOBASE is used to configure the mode/pads
+	 * GPIOBASE is used to configure the direction and default value
+	 */
+	ret = pch_get_gpio_base(pch, &gpiobase);
+	if (ret) {
+		debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
+		      gpiobase);
+		return -EINVAL;
+	}
+
+	conf_count = broadwell_pinctrl_read_configs(dev, conf,
+						    ARRAY_SIZE(conf));
+	if (conf_count < 0) {
+		debug("%s: Cannot read configs: err=%d\n", __func__, ret);
+		return conf_count;
+	}
+
+	/*
+	 * Assume that pin settings are provided for every pin. Pins not
+	 * mentioned will get the first config mentioned in the list.
+	 */
+	ret = broadwell_pinctrl_read_pins(dev, conf, conf_count, gpio_conf,
+					  MAX_GPIOS);
+	if (ret) {
+		debug("%s: Cannot read pin settings: err=%d\n", __func__, ret);
+		return ret;
+	}
+
+	regs = (struct pch_lp_gpio_regs *)gpiobase;
+	broadwell_pinctrl_commit(regs, conf, gpio_conf, ARRAY_SIZE(conf));
+
+	debug("%s: done\n", __func__);
+
+	return 0;
+}
+
+static const struct udevice_id broadwell_pinctrl_match[] = {
+	{ .compatible = "intel,x86-broadwell-pinctrl",
+		.data = X86_SYSCON_PINCONF },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(broadwell_pinctrl) = {
+	.name = "broadwell_pinctrl",
+	.id = UCLASS_SYSCON,
+	.of_match = broadwell_pinctrl_match,
+	.probe = broadwell_pinctrl_probe,
+};
diff --git a/arch/x86/include/asm/arch-broadwell/gpio.h b/arch/x86/include/asm/arch-broadwell/gpio.h
new file mode 100644
index 00000000000..0ed881b72d3
--- /dev/null
+++ b/arch/x86/include/asm/arch-broadwell/gpio.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * From Coreboot src/soc/intel/broadwell/include/soc/gpio.h
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_GPIO
+#define __ASM_ARCH_GPIO
+
+#define GPIO_PER_BANK	32
+#define GPIO_BANKS	3
+
+struct broadwell_bank_platdata {
+	uint16_t base_addr;
+	const char *bank_name;
+	int bank;
+};
+
+/* PCH-LP GPIOBASE Registers */
+struct pch_lp_gpio_regs {
+	u32 own[GPIO_BANKS];
+	u32 reserved0;
+
+	u16 pirq_to_ioxapic;
+	u16 reserved1[3];
+	u32 blink;
+	u32 ser_blink;
+
+	u32 ser_blink_cmdsts;
+	u32 ser_blink_data;
+	u16 gpi_nmi_en;
+	u16 gpi_nmi_sts;
+	u32 reserved2;
+
+	u32 gpi_route[GPIO_BANKS];
+	u32 reserved3;
+
+	u32 reserved4[4];
+
+	u32 alt_gpi_smi_sts;
+	u32 alt_gpi_smi_en;
+	u32 reserved5[2];
+
+	u32 rst_sel[GPIO_BANKS];
+	u32 reserved6;
+
+	u32 reserved9[3];
+	u32 gpio_gc;
+
+	u32 gpi_is[GPIO_BANKS];
+	u32 reserved10;
+
+	u32 gpi_ie[GPIO_BANKS];
+	u32 reserved11;
+
+	u32 reserved12[24];
+
+	struct {
+		u32 conf_a;
+		u32 conf_b;
+	} config[GPIO_BANKS * GPIO_PER_BANK];
+};
+check_member(pch_lp_gpio_regs, gpi_ie[0], 0x90);
+check_member(pch_lp_gpio_regs, config[0], 0x100);
+
+enum {
+	CONFA_MODE_SHIFT	= 0,
+	CONFA_MODE_GPIO		= 1 << CONFA_MODE_SHIFT,
+
+	CONFA_DIR_SHIFT		= 2,
+	CONFA_DIR_INPUT		= 1 << CONFA_DIR_SHIFT,
+
+	CONFA_INVERT_SHIFT	= 3,
+	CONFA_INVERT		= 1 << CONFA_INVERT_SHIFT,
+
+	CONFA_TRIGGER_SHIFT	= 4,
+	CONFA_TRIGGER_LEVEL	= 1 << CONFA_TRIGGER_SHIFT,
+
+	CONFA_LEVEL_SHIFT	= 30,
+	CONFA_LEVEL_HIGH	= 1UL << CONFA_LEVEL_SHIFT,
+
+	CONFA_OUTPUT_SHIFT	= 31,
+	CONFA_OUTPUT_HIGH	= 1UL << CONFA_OUTPUT_SHIFT,
+
+	CONFB_SENSE_SHIFT	= 2,
+	CONFB_SENSE_DISABLE	= 1 << CONFB_SENSE_SHIFT,
+};
+
+#endif
diff --git a/doc/device-tree-bindings/gpio/intel,x86-broadwell-pinctrl.txt b/doc/device-tree-bindings/gpio/intel,x86-broadwell-pinctrl.txt
new file mode 100644
index 00000000000..a644381e0af
--- /dev/null
+++ b/doc/device-tree-bindings/gpio/intel,x86-broadwell-pinctrl.txt
@@ -0,0 +1,208 @@
+Intel x86 PINCTRL/GPIO controller
+
+Pin-muxing on broadwell devices can be described with a node for the PINCTRL
+master node and a set of child nodes for each required pin state on the SoC.
+These pin states use phandles and are referred to but a configuration section
+which lists all pins in the device.
+
+The PINCTRL master node requires the following properties:
+- compatible : "intel,x86-broadwell-pinctrl"
+
+Pin state nodes must be sub-nodes of the pinctrl master node. The must have
+a phandle. They can contain the following optional properties:
+- mode-gpio	- forces the pin into GPIO mode
+- output-value	- sets the default output value of the GPIO, 0 (low, default)
+			or 1 (high)
+- direction	- sets the direction of the gpio, either PIN_INPUT (default)
+			or PIN_OUTPUT
+- invert	- the input pin is inverted
+- trigger	- sets the trigger type, either TRIGGER_EDGE (default) or
+			TRIGGER_LEVEL
+- sense-disable - the input state sense is disabled
+- owner		0 sets the owner of the pin, either OWNER_ACPI (default) or
+			ONWER_GPIO
+- route		- sets whether the pin is routed, either PIRQ_APIC_MASK or
+			PIRQ_APIC_ROUTE
+- irq-enable	- the interrupt is enabled
+- reset-rsmrst	- the pin will only be reset by RSMRST
+- pirq-apic	- the pin will be routed to the IOxAPIC
+
+The first pin state will be the default, so pins without a configuration will
+use that.
+
+The pin configuration node is also a sub-node of the pinctrl master node, but
+does not have a phandle. It has a single property:
+
+- config	- configuration to use for each pin. Each entry has of 3 cells:
+			- GPIO number (0..94)
+			- phandle of configuration (above)
+			- interrupt number (0..15)
+
+		  There should be one entry for each pin (i.e. 95 entries).
+		  But missing pins will receive the default configuration.
+
+Example:
+
+pch_pinctrl {
+	compatible = "intel,x86-broadwell-pinctrl";
+
+	/* Put this first: it is the default */
+	gpio_unused: gpio-unused {
+		mode-gpio;
+		direction = <PIN_INPUT>;
+		owner = <OWNER_GPIO>;
+		sense-disable;
+	};
+
+	gpio_acpi_sci: acpi-sci {
+		mode-gpio;
+		direction = <PIN_INPUT>;
+		invert;
+		route = <ROUTE_SCI>;
+	};
+
+	gpio_acpi_smi: acpi-smi {
+		mode-gpio;
+		direction = <PIN_INPUT>;
+		invert;
+		route = <ROUTE_SMI>;
+	};
+
+	gpio_input: gpio-input {
+		mode-gpio;
+		direction = <PIN_INPUT>;
+		owner = <OWNER_GPIO>;
+	};
+
+	gpio_input_invert: gpio-input-invert {
+		mode-gpio;
+		direction = <PIN_INPUT>;
+		owner = <OWNER_GPIO>;
+		invert;
+	};
+
+	gpio_native: gpio-native {
+	};
+
+	gpio_out_high: gpio-out-high {
+		mode-gpio;
+		direction = <PIN_OUTPUT>;
+		output-value = <1>;
+		owner = <OWNER_GPIO>;
+		sense-disable;
+	};
+
+	gpio_out_low: gpio-out-low {
+		mode-gpio;
+		direction = <PIN_OUTPUT>;
+		output-value = <0>;
+		owner = <OWNER_GPIO>;
+		sense-disable;
+	};
+
+	gpio_pirq: gpio-pirq {
+		mode-gpio;
+		direction = <PIN_INPUT>;
+		owner = <OWNER_GPIO>;
+		pirq-apic = <PIRQ_APIC_ROUTE>;
+	};
+
+	soc_gpio@0 {
+		config =
+			<0 &gpio_unused 0>,	/* unused */
+			<1 &gpio_unused 0>,	/* unused */
+			<2 &gpio_unused 0>,	/* unused */
+			<3 &gpio_unused 0>,	/* unused */
+			<4 &gpio_native 0>,	/* native: i2c0_sda_gpio4 */
+			<5 &gpio_native 0>,	/* native: i2c0_scl_gpio5 */
+			<6 &gpio_native 0>,	/* native: i2c1_sda_gpio6 */
+			<7 &gpio_native 0>,	/* native: i2c1_scl_gpio7 */
+			<8 &gpio_acpi_sci 0>,	/* pch_lte_wake_l */
+			<9 &gpio_input_invert 0>,/* trackpad_int_l (wake) */
+			<10 &gpio_acpi_sci 0>,	/* pch_wlan_wake_l */
+			<11 &gpio_unused 0>,	/* unused */
+			<12 &gpio_unused 0>,	/* unused */
+			<13 &gpio_pirq 3>,	/* trackpad_int_l (pirql) */
+			<14 &gpio_pirq 4>,	/* touch_int_l (pirqm) */
+			<15 &gpio_unused 0>,	/* unused (strap) */
+			<16 &gpio_input 0>,	/* pch_wp */
+			<17 &gpio_unused 0>,	/* unused */
+			<18 &gpio_unused 0>,	/* unused */
+			<19 &gpio_unused 0>,	/* unused */
+			<20 &gpio_native 0>,	/* pcie_wlan_clkreq_l */
+			<21 &gpio_out_high 0>,	/* pp3300_ssd_en */
+			<22 &gpio_unused 0>,	/* unused */
+			<23 &gpio_out_low 0>,	/* pp3300_autobahn_en */
+			<24 &gpio_unused 0>,	/* unused */
+			<25 &gpio_input 0>,	/* ec_in_rw */
+			<26 &gpio_unused 0>,	/* unused */
+			<27 &gpio_acpi_sci 0>,	/* pch_wake_l */
+			<28 &gpio_unused 0>,	/* unused */
+			<29 &gpio_unused 0>,	/* unused */
+			<30 &gpio_native 0>,	/* native: pch_suswarn_l */
+			<31 &gpio_native 0>,	/* native: acok_buf */
+			<32 &gpio_native 0>,	/* native: lpc_clkrun_l */
+			<33 &gpio_native 0>,	/* native: ssd_devslp */
+			<34 &gpio_acpi_smi 0>,	/* ec_smi_l */
+			<35 &gpio_acpi_smi 0>,	/* pch_nmi_dbg_l (route in nmi_en) */
+			<36 &gpio_acpi_sci 0>,	/* ec_sci_l */
+			<37 &gpio_unused 0>,	/* unused */
+			<38 &gpio_unused 0>,	/* unused */
+			<39 &gpio_unused 0>,	/* unused */
+			<40 &gpio_native 0>,	/* native: pch_usb1_oc_l */
+			<41 &gpio_native 0>,	/* native: pch_usb2_oc_l */
+			<42 &gpio_unused 0>,	/* wlan_disable_l */
+			<43 &gpio_out_high 0>,	/* pp1800_codec_en */
+			<44 &gpio_unused 0>,	/* unused */
+			<45 &gpio_acpi_sci 0>,	/* dsp_int - codec wake */
+			<46 &gpio_pirq 6>,	/* hotword_det_l_3v3 (pirqo) - codec irq */
+			<47 &gpio_out_low 0>,	/* ssd_reset_l */
+			<48 &gpio_unused 0>,	/* unused */
+			<49 &gpio_unused 0>,	/* unused */
+			<50 &gpio_unused 0>,	/* unused */
+			<51 &gpio_unused 0>,	/* unused */
+			<52 &gpio_input 0>,	/* sim_det */
+			<53 &gpio_unused 0>,	/* unused */
+			<54 &gpio_unused 0>,	/* unused */
+			<55 &gpio_unused 0>,	/* unused */
+			<56 &gpio_unused 0>,	/* unused */
+			<57 &gpio_out_high 0>,	/* codec_reset_l */
+			<58 &gpio_unused 0>,	/* unused */
+			<59 &gpio_out_high 0>,	/* lte_disable_l */
+			<60 &gpio_unused 0>,	/* unused */
+			<61 &gpio_native 0>,	/* native: pch_sus_stat */
+			<62 &gpio_native 0>,	/* native: pch_susclk */
+			<63 &gpio_native 0>,	/* native: pch_slp_s5_l */
+			<64 &gpio_unused 0>,	/* unused */
+			<65 &gpio_input 0>,	/* ram_id3 */
+			<66 &gpio_input 0>,	/* ram_id3_old (strap) */
+			<67 &gpio_input 0>,	/* ram_id0 */
+			<68 &gpio_input 0>,	/* ram_id1 */
+			<69 &gpio_input 0>,	/* ram_id2 */
+			<70 &gpio_unused 0>,	/* unused */
+			<71 &gpio_native 0>,	/* native: modphy_en */
+			<72 &gpio_unused 0>,	/* unused */
+			<73 &gpio_unused 0>,	/* unused */
+			<74 &gpio_unused 0>,	/* unused */
+			<75 &gpio_unused 0>,	/* unused */
+			<76 &gpio_unused 0>,	/* unused */
+			<77 &gpio_unused 0>,	/* unused */
+			<78 &gpio_unused 0>,	/* unused */
+			<79 &gpio_unused 0>,	/* unused */
+			<80 &gpio_unused 0>,	/* unused */
+			<81 &gpio_unused 0>,	/* unused */
+			<82 &gpio_native 0>,	/* native: ec_rcin_l */
+			<83 &gpio_native 0>,	/* gspi0_cs */
+			<84 &gpio_native 0>,	/* gspi0_clk */
+			<85 &gpio_native 0>,	/* gspi0_miso */
+			<86 &gpio_native 0>,	/* gspi0_mosi (strap) */
+			<87 &gpio_unused 0>,	/* unused */
+			<88 &gpio_unused 0>,	/* unused */
+			<89 &gpio_out_high 0>,	/* pp3300_sd_en */
+			<90 &gpio_unused 0>,	/* unused */
+			<91 &gpio_unused 0>,	/* unused */
+			<92 &gpio_unused 0>,	/* unused */
+			<93 &gpio_unused 0>,	/* unused */
+			<94 &gpio_unused 0 >;	/* unused */
+	};
+};
diff --git a/include/dt-bindings/gpio/x86-gpio.h b/include/dt-bindings/gpio/x86-gpio.h
index 7f1de30c0bf..3998a8e0c69 100644
--- a/include/dt-bindings/gpio/x86-gpio.h
+++ b/include/dt-bindings/gpio/x86-gpio.h
@@ -28,4 +28,16 @@
 #define PULL_STR_2K		0
 #define PULL_STR_20K	2
 
+#define ROUTE_SCI	0
+#define ROUTE_SMI	1
+
+#define OWNER_ACPI	0
+#define OWNER_GPIO	1
+
+#define PIRQ_APIC_MASK	0
+#define PIRQ_APIC_ROUTE	1
+
+#define TRIGGER_EDGE	0
+#define TRIGGER_LEVEL	1
+
 #endif