Merge with git://www.denx.de/git/u-boot.git

Makefile

@@ -1794,13 +1794,13 @@ MPC8349ITX_config \
 MPC8349ITX_LOWBOOT_config \
 MPC8349ITXGP_config:	unconfig
 	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/mpc8349itx
+	@mkdir -p $(obj)board/freescale/mpc8349itx
 	@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
 	@if [ "$(findstring GP,$@)" ] ; then \
-		echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
+		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
 	fi
 	@if [ "$(findstring LOWBOOT,$@)" ] ; then \
-		echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
+		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
 	fi
 	@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
 

board/amcc/katmai/katmai.c

@@ -34,6 +34,8 @@
 #undef PCIE_ENDPOINT
 /* #define PCIE_ENDPOINT 1 */
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int ppc440spe_init_pcie_rootport(int port);
 void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
 
@@ -322,8 +324,6 @@ int pci_pre_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*-------------------------------------------------------------------+
 	 * Disable everything
 	 *-------------------------------------------------------------------*/

board/amcc/taishan/taishan.c

@@ -32,6 +32,8 @@
 void show_reset_reg(void);
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int lcd_init(void);
 
 int board_early_init_f (void)
@@ -266,8 +268,6 @@ int pci_pre_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/

board/amcc/yucca/yucca.c

@@ -34,6 +34,8 @@
 #include "yucca.h"
 #include "../cpu/ppc4xx/440spe_pcie.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef PCIE_ENDPOINT
 /* #define PCIE_ENDPOINT 1 */
 
@@ -668,8 +670,6 @@ int pci_pre_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*-------------------------------------------------------------------+
 	 * Disable everything
 	 *-------------------------------------------------------------------*/

board/bf533-ezkit/bf533-ezkit.c

@@ -30,6 +30,8 @@
 #include "psd4256.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkboard(void)
 {
 #if (BFIN_CPU == ADSP_BF531)
@@ -46,7 +48,6 @@ int checkboard(void)
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	int brate;
 	char *tmp = getenv("baudrate");

board/bf533-stamp/bf533-stamp.c

@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include "bf533-stamp.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define STATUS_LED_OFF 0
 #define STATUS_LED_ON  1
 
@@ -55,7 +57,6 @@ int checkboard(void)
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	printf("SDRAM attributes:\n");
 	printf

board/bf537-stamp/bf537-stamp.c

@@ -32,6 +32,8 @@
 #include <asm/io.h>
 #include "ether_bf537.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define POST_WORD_ADDR 0xFF903FFC
 
 /*
@@ -132,7 +134,6 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	int brate;
 	char *tmp = getenv("baudrate");

board/bf561-ezkit/bf561-ezkit.c

@@ -29,6 +29,8 @@
 #include <common.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int checkboard(void)
 {
 	printf("CPU:   ADSP BF561\n");
@@ -39,7 +41,6 @@ int checkboard(void)
 
 long int initdram(int board_type)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef DEBUG
 	int brate;
 	char *tmp = getenv("baudrate");

board/cm5200/cmd_cm5200.c

@@ -27,7 +27,7 @@
 #include <i2c.h>
 #include <usb.h>
 
-#ifdef CONFIG_CMD_BSB
+#ifdef CONFIG_CMD_BSP
 
 int do_i2c(char *argv[])
 {

board/davinci/dv-evm/dv_board.c

@@ -31,6 +31,8 @@
 
 #define MACH_TYPE_DAVINCI_EVM		901
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void	i2c_init(int speed, int slaveaddr);
 extern void	timer_init(void);
 extern int	eth_hw_init(void);
@@ -115,8 +117,6 @@ void dsp_on(void)
 
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of the board */
 	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
 
@@ -202,8 +202,6 @@ int misc_init_r (void)
 
 int dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/davinci/schmoogie/dv_board.c

@@ -31,6 +31,8 @@
 
 #define MACH_TYPE_SCHMOOGIE		1255
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void	i2c_init(int speed, int slaveaddr);
 extern void	timer_init(void);
 extern int	eth_hw_init(void);
@@ -115,8 +117,6 @@ void dsp_on(void)
 
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of the board */
 	gd->bd->bi_arch_number = MACH_TYPE_SCHMOOGIE;
 
@@ -244,8 +244,6 @@ int misc_init_r (void)
 
 int dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/davinci/sonata/dv_board.c

@@ -31,6 +31,8 @@
 
 #define MACH_TYPE_SONATA		1254
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void	i2c_init(int speed, int slaveaddr);
 extern void	timer_init(void);
 extern int	eth_hw_init(void);
@@ -115,8 +117,6 @@ void dsp_on(void)
 
 int board_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number of the board */
 	gd->bd->bi_arch_number = MACH_TYPE_SONATA;
 
@@ -199,8 +199,6 @@ int misc_init_r (void)
 
 int dram_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/fads/fads.h

@@ -229,6 +229,7 @@
 #define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sector total size	*/
 #define CFG_ENV_OFFSET		CFG_ENV_SECT_SIZE
 #define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment		*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 #define	CFG_DIRECT_FLASH_TFTP
 

board/freescale/common/pixis.c

@@ -25,10 +25,9 @@
 #include <common.h>
 #include <command.h>
 #include <watchdog.h>
-#include <asm/cache.h>
 
 #ifdef CONFIG_FSL_PIXIS
-
+#include <asm/cache.h>
 #include "pixis.h"
 
 

board/freescale/m5235evb/mii.c

@@ -204,7 +204,7 @@ int mii_discover_phy(struct eth_device *dev)
 }
 #endif				/* CFG_DISCOVER_PHY */
 
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
 
 void __mii_init(void)
 {

board/freescale/m5329evb/mii.c

@@ -203,7 +203,7 @@ int mii_discover_phy(struct eth_device *dev)
 }
 #endif				/* CFG_DISCOVER_PHY */
 
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
 
 void __mii_init(void)
 {

board/freescale/m54455evb/mii.c

@@ -221,7 +221,7 @@ int mii_discover_phy(struct eth_device *dev)
 }
 #endif				/* CFG_DISCOVER_PHY */
 
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
 
 void __mii_init(void)
 {

board/freescale/mpc8313erdb/sdram.c

@@ -33,10 +33,11 @@
 
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_8313ERDB_BROKEN_PMC
 static void resume_from_sleep(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	u32 magic = *(u32 *)0;
 
 	typedef void (*func_t)(void);

board/lpc2292sodimm/lpc2292sodimm.c

@@ -28,8 +28,7 @@
 #include <common.h>
 #include <clps7111.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
-
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -37,8 +36,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Activate LED flasher */
 	IO_LEDFLSH = 0x40;
 
@@ -53,8 +50,6 @@ int board_init (void)
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/m5271evb/mii.c

@@ -200,7 +200,7 @@ int mii_discover_phy(struct eth_device *dev)
 }
 #endif				/* CFG_DISCOVER_PHY */
 
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
 
 void __mii_init(void)
 {

board/m5272c3/mii.c

@@ -200,7 +200,7 @@ int mii_discover_phy(struct eth_device *dev)
 }
 #endif				/* CFG_DISCOVER_PHY */
 
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
 
 void __mii_init(void)
 {

board/m5282evb/mii.c

@@ -201,7 +201,7 @@ int mii_discover_phy(struct eth_device *dev)
 }
 #endif				/* CFG_DISCOVER_PHY */
 
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
 
 void __mii_init(void)
 {

board/mpc7448hpc2/mpc7448hpc2.c

@@ -38,6 +38,8 @@ extern void ft_cpu_setup (void *blob, bd_t *bd);
 
 #undef	DEBUG
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void flush_data_cache (void);
 extern void invalidate_l1_instruction_cache (void);
 extern void tsi108_init_f (void);
@@ -46,8 +48,6 @@ int display_mem_map (void);
 
 void after_reloc (ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/*
 	 * Jump to the main U-Boot board init code
 	 */

board/mpc7448hpc2/tsi108_init.c

@@ -33,6 +33,8 @@
 #include <asm/processor.h>
 #include <tsi108.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void mpicInit (int verbose);
 
 /*
@@ -141,7 +143,6 @@ unsigned long get_board_bus_clk (void)
 
 int board_early_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong i;
 
 	gd->mem_clk = 0;
@@ -583,7 +584,6 @@ unsigned long get_l2cr (void)
 
 int misc_init_r (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 #ifdef CFG_CLK_SPREAD	/* Initialize Spread-Spectrum Clock generation */
 	ulong i;
 

board/mpl/vcma9/cmd_vcma9.c

@@ -40,6 +40,8 @@ static uchar cs8900_chksum(ushort data)
 
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void print_vcma9_info(void);
 extern int vcma9_cantest(int);
 extern int vcma9_nandtest(void);
@@ -53,8 +55,6 @@ extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (strcmp(argv[1], "info") == 0)
 	{
 		print_vcma9_info();

board/sbc2410x/sbc2410x.c

@@ -35,7 +35,7 @@
 #include <linux/mtd/nand.h>
 #endif
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
 
 #define FCLK_SPEED 1
 
@@ -74,7 +74,6 @@ static inline void delay (unsigned long loops)
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
@@ -128,8 +127,6 @@ int board_init (void)
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/siemens/SMN42/smn42.c

@@ -31,8 +31,7 @@
 #include <common.h>
 #include <clps7111.h>
 
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
-
 
 /*
  * Miscellaneous platform dependent initialisations
@@ -40,8 +39,6 @@
 
 int board_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* arch number MACH_TYPE_ARMADILLO - not official*/
 	gd->bd->bi_arch_number = 83;
 
@@ -53,8 +50,6 @@ int board_init (void)
 
 int dram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 

board/stxssa/stxssa.c

@@ -381,9 +381,11 @@ static struct pci_config_table pci_stxgp3_config_table[] = {
 static struct pci_controller hose[] = {
 #ifndef CONFIG_PCI_PNP
 	{ config_table: pci_stxgp3_config_table,},
-#ifdef CONFIG_MPC85XX_PCI2
+#else
 	{},
 #endif
+#ifdef CONFIG_MPC85XX_PCI2
+	{},
 #endif
 };
 

board/stxssa/u-boot.lds

@@ -145,6 +145,7 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+  . = .;
   __bss_start = .;
   .bss       :
   {

board/tqm5200/tqm5200.c

@@ -43,6 +43,8 @@
 #include "mt48lc16m16a2-75.h"
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_PS2MULT
 void ps2mult_early_init(void);
 #endif
@@ -477,8 +479,6 @@ int silent_boot (void)
 
 int board_early_init_f (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	if (silent_boot())
 		gd->flags |= GD_FLG_SILENT;
 

common/cmd_nand.c

@@ -161,7 +161,11 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	ulong addr, off, size;
 	char *cmd, *s;
 	nand_info_t *nand;
+#ifdef CFG_NAND_QUIET
+	int quiet = CFG_NAND_QUIET;
+#else
 	int quiet = 0;
+#endif
 	const char *quiet_str = getenv("quiet");
 
 	/* at least two arguments please */
@@ -452,7 +456,7 @@ U_BOOT_CMD(nand, 5, 1, do_nand,
 	"info                  - show available NAND devices\n"
 	"nand device [dev]     - show or set current device\n"
 	"nand read[.jffs2]     - addr off|partition size\n"
-	"nand write[.jffs2]    - addr off|partiton size - read/write `size' bytes starting\n"
+	"nand write[.jffs2]    - addr off|partition size - read/write `size' bytes starting\n"
 	"    at offset `off' to/from memory address `addr'\n"
 	"nand erase [clean] [off size] - erase `size' bytes from\n"
 	"    offset `off' (entire device if not specified)\n"

common/environment.c

@@ -51,18 +51,7 @@
  * a seperate section.  Note that ENV_CRC is only defined when building
  * U-Boot itself.
  */
-#if (defined(CONFIG_CMI)	|| \
+#if (defined(CFG_USE_PPCENV) || defined(CONFIG_NAND_U_BOOT)) && \
-     defined(CONFIG_FADS)	|| \
-     defined(CONFIG_HYMOD)	|| \
-     defined(CONFIG_ICU862)	|| \
-     defined(CONFIG_R360MPI)	|| \
-     defined(CONFIG_TQM8xxL)	|| \
-     defined(CONFIG_RRVISION)	|| \
-     defined(CONFIG_TRAB)   	|| \
-     defined(CONFIG_PPCHAMELEONEVB) || \
-     defined(CONFIG_M5271EVB)	|| \
-     defined(CONFIG_IDMR)	|| \
-     defined(CONFIG_NAND_U_BOOT))	&& \
      defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */
 /* XXX - This only works with GNU C */
 #  define __PPCENV__ __attribute__ ((section(".ppcenv")))

cpu/arm720t/serial.c

@@ -129,8 +129,6 @@ serial_puts (const char *s)
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned short divisor = 0;
 
 	switch (gd->baudrate) {

cpu/bf533/serial.c

@@ -76,7 +76,6 @@ void calc_baud(void)
 void serial_setbrg(void)
 {
 	int i;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	calc_baud();
 

cpu/bf537/i2c.c

@@ -22,6 +22,8 @@
 #include <i2c.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define bfin_read16(addr) ({ unsigned __v; \
 			__asm__ __volatile__ (\
 			"%0 = w[%1] (z);\n\t"\
@@ -68,7 +70,6 @@
 
 #ifdef DEBUG_I2C
 #define PRINTD(fmt,args...)	do {	\
-	DECLARE_GLOBAL_DATA_PTR;	\
 	if (gd->have_console)		\
 		printf(fmt ,##args);	\
 	} while (0)

cpu/bf537/serial.c

@@ -52,6 +52,8 @@
 #include <asm/io.h>
 #include "serial.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 unsigned long pll_div_fact;
 
 void calc_baud(void)
@@ -74,7 +76,6 @@ void calc_baud(void)
 void serial_setbrg(void)
 {
 	int i;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	calc_baud();
 

cpu/bf561/serial.c

@@ -52,6 +52,8 @@
 #include "serial.h"
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 unsigned long pll_div_fact;
 
 void calc_baud(void)
@@ -74,7 +76,6 @@ void calc_baud(void)
 void serial_setbrg(void)
 {
 	int i;
-	DECLARE_GLOBAL_DATA_PTR;
 
 	calc_baud();
 

cpu/mcf532x/cpu.c

@@ -31,6 +31,8 @@
 
 #include <asm/immap.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
 {
 	volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
@@ -48,8 +50,6 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
 
 int checkcpu(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
 	u16 msk;
 	u16 id = 0;

cpu/mcf532x/speed.c

@@ -30,6 +30,8 @@
 
 #include <asm/immap.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* PLL min/max specifications */
 #define MAX_FVCO	500000	/* KHz */
 #define MAX_FSYS	80000	/* KHz */
@@ -208,8 +210,6 @@ int clock_pll(int fsys, int flags)
  */
 int get_clocks(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000;
 	gd->cpu_clk = (gd->bus_clk * 3);
 	return (0);

cpu/mpc86xx/cpu_init.c

@@ -29,6 +29,8 @@
 #include <common.h>
 #include <mpc86xx.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /*
  * Breathe some life into the CPU...
  *
@@ -38,7 +40,6 @@
 
 void cpu_init_f(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
 

cpu/mpc86xx/speed.c

@@ -29,6 +29,7 @@
 #include <mpc86xx.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 void get_sys_info(sys_info_t *sysInfo)
 {
@@ -96,7 +97,6 @@ void get_sys_info(sys_info_t *sysInfo)
 
 int get_clocks(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);

cpu/mpc86xx/traps.c

@@ -34,6 +34,8 @@
 #include <command.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_CMD_KGDB)
 int (*debugger_exception_handler)(struct pt_regs *) = 0;
 #endif
@@ -50,8 +52,6 @@ extern unsigned long search_exception_table(unsigned long);
 void
 print_backtrace(unsigned long *sp)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int cnt = 0;
 	unsigned long i;
 

drivers/nand/nand_util.c

@@ -210,9 +210,12 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 
 		if (!opts->quiet) {
 			unsigned long long n =(unsigned long long)
-				 (erase.addr+meminfo->erasesize-opts->offset)
+				(erase.addr + meminfo->erasesize - opts->offset)
-				 * 100;
+				* 100;
-			int percent = (int)do_div(n, erase_length);
+			int percent;
+
+			do_div(n, erase_length);
+			percent = (int)n;
 
 			/* output progress message only at whole percent
 			 * steps to reduce the number of messages printed
@@ -478,7 +481,11 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts)
 		if (!opts->quiet) {
 			unsigned long long n = (unsigned long long)
 				 (opts->length-imglen) * 100;
-			int percent = (int)do_div(n, opts->length);
+			int percent;
+
+			do_div(n, opts->length);
+			percent = (int)n;
+
 			/* output progress message only at whole percent
 			 * steps to reduce the number of messages printed
 			 * on (slow) serial consoles
@@ -653,7 +660,11 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts)
 		if (!opts->quiet) {
 			unsigned long long n = (unsigned long long)
 				 (opts->length-imglen) * 100;
-			int percent = (int)do_div(n ,opts->length);
+			int percent;
+
+			do_div(n, opts->length);
+			percent = (int)n;
+
 			/* output progress message only at whole percent
 			 * steps to reduce the number of messages printed
 			 * on (slow) serial consoles

drivers/qe/qe.c

@@ -30,6 +30,8 @@
 qe_map_t		*qe_immr = NULL;
 static qe_snum_t	snums[QE_NUM_OF_SNUM];
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
 {
 	u32           cecr;
@@ -51,8 +53,6 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
 
 uint qe_muram_alloc(uint size, uint align)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint	retloc;
 	uint	align_mask, off;
 	uint	savebase;
@@ -158,8 +158,6 @@ void qe_put_snum(u8 snum)
 
 void qe_init(uint qe_base)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	/* Init the QE IMMR base */
 	qe_immr = (qe_map_t *)qe_base;
 
@@ -204,7 +202,6 @@ void qe_assign_page(uint snum, uint para_ram_base)
 
 int qe_set_brg(uint brg, uint rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile uint	*bp;
 	u32		divisor;
 	int		div16 = 0;

drivers/tsec.c

@@ -1262,10 +1262,10 @@ uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
 		case MIIM_LXT971_SR2_100HDX:
 			priv->speed = 100;
 			priv->duplexity = 0;
+			break;
 		default:
 			priv->speed = 100;
 			priv->duplexity = 1;
-			break;
 		}
 	} else {
 		priv->speed = 0;

drivers/usbdcore_mpc8xx.c

@@ -64,6 +64,8 @@
 #include "usbdcore_mpc8xx.h"
 #include "usbdcore_ep0.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define ERR(fmt, args...)\
 	serial_printf("ERROR : [%s] %s:%d: "fmt,\
 				__FILE__,__FUNCTION__,__LINE__, ##args)
@@ -1216,7 +1218,6 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 #elif defined(CFG_USB_BRGCLK)
 
 	/* This has been tested with brgclk == 50MHz */
-	DECLARE_GLOBAL_DATA_PTR;
 	int divisor = 0;
 
 	if (gd->cpu_clk < 48000000L) {

include/configs/ASH405.h

@@ -158,7 +158,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff

include/configs/CATcenter.h

@@ -399,6 +399,8 @@
 #define CFG_ENV_ADDR_REDUND	0xFFFFA000
 #define CFG_ENV_SIZE_REDUND	0x2000
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 #define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
 #define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
 

include/configs/CMS700.h

@@ -165,7 +165,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff

include/configs/FADS823.h

@@ -206,6 +206,7 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
 #define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration

include/configs/FADS850SAR.h

@@ -156,6 +156,7 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
 #define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration

include/configs/FPS850L.h

@@ -39,28 +39,44 @@
 #undef	CONFIG_8xx_CONS_SMC1
 #define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
 #undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		19200
+#define CONFIG_BAUDRATE		115200
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-#define CONFIG_BOOTCOMMAND	"bootm 40020000" /* autoboot command	*/
 
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+#define	CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
-#define CONFIG_BOOTARGS		"root=/dev/nfs rw "			\
+#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-				"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx "	\
+
-				"nfsaddrs=10.0.0.99:10.0.0.2"
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/fps850L/uImage\0"				\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-
 /*
  * BOOTP options
  */
@@ -80,24 +96,32 @@
 #define CONFIG_BOOTP_NTPSERVER
 #define CONFIG_BOOTP_TIMEOFFSET
 
+#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
-#undef CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_BDI
+#define CONFIG_CMD_DATE
-#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_NFS
-#undef CONFIG_CMD_CACHE
+#define CONFIG_CMD_SNTP
 
 
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
 #if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else

include/configs/FPS860L.h

@@ -40,18 +40,37 @@
 #define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
 #undef	CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE		115200
-#if 0
+
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#define	CONFIG_BOOTCOUNT_LIMIT
-#else
+
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-#define CONFIG_BOOTCOMMAND	"bootm 40040000" /* autoboot command	*/
 
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
-#define CONFIG_BOOTARGS		"root=/dev/nfs rw "			\
+#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
-				"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx "	\
+
-				"nfsaddrs=10.0.0.99:10.0.0.2"
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/fps850L/uImage\0"				\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
@@ -79,11 +98,11 @@
 
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
+
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -95,7 +114,14 @@
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
 #if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else

include/configs/HH405.h

@@ -217,7 +217,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff

include/configs/HUB405.h

@@ -157,7 +157,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff

include/configs/ICU862.h

@@ -234,6 +234,7 @@
 
 #define CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment sector	*/
 #define	CFG_ENV_SIZE		0x4000	/* Used Size of Environment Sector	*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration

include/configs/M5271EVB.h

@@ -54,13 +54,12 @@
  */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
 #define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
 #else
 #define CFG_ENV_ADDR		0xffe04000
+#endif
 #define CFG_ENV_SECT_SIZE	0x2000
 #define CFG_ENV_IS_IN_FLASH	1
-#endif
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*
  * BOOTP options

include/configs/PLU405.h

@@ -177,7 +177,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff

include/configs/PPChameleonEVB.h

@@ -429,6 +429,8 @@
 #define CFG_ENV_ADDR_REDUND	0xFFFFA000
 #define CFG_ENV_SIZE_REDUND	0x2000
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 #endif	/* ENVIRONMENT_IN_EEPROM */
 
 

include/configs/R360MPI.h

@@ -233,6 +233,7 @@
 #define	CFG_ENV_OFFSET		0x40000	/* Offset of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment sector	*/
 #define	CFG_ENV_SIZE		0x4000	/* Used Size of Environment sector	*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration

include/configs/RRvision.h

@@ -235,6 +235,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */

include/configs/TQM823L.h

@@ -70,8 +70,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM823L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
+	"fdt_addr=40040000\0"						\
-	"ramdisk_addr=40100000\0"					\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -205,6 +206,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM823M.h

@@ -70,8 +70,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM823M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
+	"fdt_addr=40080000\0"						\
-	"ramdisk_addr=40180000\0"					\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -202,6 +203,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM850L.h

@@ -66,8 +66,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM850L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
+	"fdt_addr=40040000\0"						\
-	"ramdisk_addr=40100000\0"					\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -192,6 +193,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM850M.h

@@ -64,8 +64,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM850M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
+	"fdt_addr=40080000\0"						\
-	"ramdisk_addr=40180000\0"					\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -191,6 +192,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM855L.h

@@ -69,8 +69,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM855L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
+	"fdt_addr=40040000\0"						\
-	"ramdisk_addr=40100000\0"					\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -196,6 +197,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM855M.h

@@ -69,8 +69,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM855M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
+	"fdt_addr=40080000\0"						\
-	"ramdisk_addr=40180000\0"					\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -231,6 +232,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM860L.h

@@ -69,8 +69,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM860L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
+	"fdt_addr=40040000\0"						\
-	"ramdisk_addr=40100000\0"					\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -199,6 +200,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM860M.h

@@ -69,8 +69,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM860M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
+	"fdt_addr=40080000\0"						\
-	"ramdisk_addr=40180000\0"					\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -198,6 +199,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM862L.h

@@ -72,8 +72,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM862L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
+	"fdt_addr=40040000\0"						\
-	"ramdisk_addr=40100000\0"					\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -200,6 +201,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM862M.h

@@ -72,8 +72,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM862M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
+	"fdt_addr=40080000\0"						\
-	"ramdisk_addr=40180000\0"					\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -201,6 +202,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/TQM866M.h

@@ -81,8 +81,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM866M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
+	"fdt_addr=40080000\0"						\
-	"ramdisk_addr=40180000\0"					\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -241,6 +242,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

include/configs/VOH405.h

@@ -163,7 +163,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff

include/configs/atstk1002.h

@@ -183,10 +183,9 @@
 #define CFG_LONGHELP			1
 
 #define CFG_MEMTEST_START						\
-	({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
+	({ gd->bd->bi_dram[0].start; })
 #define CFG_MEMTEST_END							\
 	({								\
-		DECLARE_GLOBAL_DATA_PTR;				\
 		gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;	\
 	})
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }

include/configs/cmi_mpc5xx.h

@@ -171,8 +171,9 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 
 #ifdef	CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00020000		/* Environment starts at this adress 	*/
+#define CFG_ENV_OFFSET		0x00020000	/* Environment starts at this adress 	*/
-#define	CFG_ENV_SIZE		0x00010000		/* Set whole sector as env 		*/
+#define	CFG_ENV_SIZE		0x00010000	/* Set whole sector as env 		*/
+#define	CFG_USE_PPCENV				/* Environment embedded in sect .ppcenv */
 #endif
 
 /*-----------------------------------------------------------------------

include/configs/hymod.h

@@ -406,6 +406,7 @@
 #define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sect real size */
 #define	CFG_ENV_ADDR	(CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration

include/configs/idmr.h

@@ -125,6 +125,8 @@
 #define CFG_ENV_IS_IN_FLASH
 #endif /* !CONFIG_MONITOR_IS_IN_RAM */
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 #define CFG_PROMPT		"=> "
 #define CFG_LONGHELP				/* undef to save memory */
 

include/configs/trab.h

@@ -419,6 +419,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /* Initial value of the on-board touch screen brightness */
 #define CFG_BRIGHTNESS 0x20
 

include/configs/virtlab2.h

@@ -207,6 +207,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */

lib_blackfin/board.c

@@ -42,6 +42,8 @@
 int post_flag;
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_NO_FLASH
 extern flash_info_t flash_info[];
 #endif
@@ -126,8 +128,6 @@ static void display_flash_config(ulong size)
 
 static int init_baudrate(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	char tmp[64];
 	int i = getenv_r("baudrate", tmp, sizeof(tmp));
 	gd->bd->bi_baudrate = gd->baudrate = (i > 0)
@@ -139,7 +139,6 @@ static int init_baudrate(void)
 #ifdef DEBUG
 static void display_global_data(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	bd_t *bd;
 	bd = gd->bd;
 	printf("--flags:%x\n", gd->flags);
@@ -256,7 +255,6 @@ void init_cplbtables(void)
 
 void board_init_f(ulong bootflag)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong addr;
 	bd_t *bd;
 	int i;
@@ -325,7 +323,6 @@ static int init_func_i2c(void)
 
 void board_init_r(gd_t * id, ulong dest_addr)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	ulong size;
 	extern void malloc_bin_reloc(void);
 	char *s, *e;

lib_blackfin/post.c

@@ -32,14 +32,14 @@
 
 #ifdef CONFIG_POST
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define POST_MAX_NUMBER		32
 
 #define BOOTMODE_MAGIC	0xDEAD0000
 
 int post_init_f(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int res = 0;
 	unsigned int i;
 
@@ -62,7 +62,6 @@ int post_init_f(void)
 
 void post_bootmode_init(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int bootmode = post_bootmode_get(0);
 	int newword;
 
@@ -109,20 +108,17 @@ int post_bootmode_get(unsigned int *last_test)
 /* POST tests run before relocation only mark status bits .... */
 static void post_log_mark_start(unsigned long testid)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->post_log_word |= (testid) << 16;
 }
 
 static void post_log_mark_succ(unsigned long testid)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	gd->post_log_word |= testid;
 }
 
 /* ... and the messages are output once we are relocated */
 void post_output_backlog(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int j;
 
 	for (j = 0; j < post_list_size; j++) {
@@ -372,8 +368,6 @@ int post_log(char *format, ...)
 
 void post_reloc(void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned int i;
 
 	/*

net/net.c

@@ -541,11 +541,11 @@ restart:
 
 		case NETLOOP_SUCCESS:
 			if (NetBootFileXferSize > 0) {
-				char buf[10];
+				char buf[20];
 				printf("Bytes transferred = %ld (%lx hex)\n",
 					NetBootFileXferSize,
 					NetBootFileXferSize);
-				sprintf(buf, "%lx", NetBootFileXferSize);
+				sprintf(buf, "%lX", NetBootFileXferSize);
 				setenv("filesize", buf);
 
 				sprintf(buf, "%lX", (unsigned long)load_addr);