Merge with git://www.denx.de/git/u-boot.git

This commit is contained in:
Peter Pearse 2007-09-18 11:12:58 +01:00
commit afd477b227
82 changed files with 265 additions and 177 deletions

View File

@ -1794,13 +1794,13 @@ MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
MPC8349ITXGP_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mpc8349itx
@mkdir -p $(obj)board/freescale/mpc8349itx
@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
@if [ "$(findstring GP,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale

View File

@ -34,6 +34,8 @@
#undef PCIE_ENDPOINT
/* #define PCIE_ENDPOINT 1 */
DECLARE_GLOBAL_DATA_PTR;
int ppc440spe_init_pcie_rootport(int port);
void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
@ -322,8 +324,6 @@ int pci_pre_init(struct pci_controller * hose )
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
DECLARE_GLOBAL_DATA_PTR;
/*-------------------------------------------------------------------+
* Disable everything
*-------------------------------------------------------------------*/

View File

@ -32,6 +32,8 @@
void show_reset_reg(void);
#endif
DECLARE_GLOBAL_DATA_PTR;
int lcd_init(void);
int board_early_init_f (void)
@ -266,8 +268,6 @@ int pci_pre_init(struct pci_controller * hose )
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
DECLARE_GLOBAL_DATA_PTR;
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/

View File

@ -34,6 +34,8 @@
#include "yucca.h"
#include "../cpu/ppc4xx/440spe_pcie.h"
DECLARE_GLOBAL_DATA_PTR;
#undef PCIE_ENDPOINT
/* #define PCIE_ENDPOINT 1 */
@ -668,8 +670,6 @@ int pci_pre_init(struct pci_controller * hose )
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
DECLARE_GLOBAL_DATA_PTR;
/*-------------------------------------------------------------------+
* Disable everything
*-------------------------------------------------------------------*/

View File

@ -30,6 +30,8 @@
#include "psd4256.h"
#endif
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
#if (BFIN_CPU == ADSP_BF531)
@ -46,7 +48,6 @@ int checkboard(void)
long int initdram(int board_type)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef DEBUG
int brate;
char *tmp = getenv("baudrate");

View File

@ -30,6 +30,8 @@
#include <asm/io.h>
#include "bf533-stamp.h"
DECLARE_GLOBAL_DATA_PTR;
#define STATUS_LED_OFF 0
#define STATUS_LED_ON 1
@ -55,7 +57,6 @@ int checkboard(void)
long int initdram(int board_type)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef DEBUG
printf("SDRAM attributes:\n");
printf

View File

@ -32,6 +32,8 @@
#include <asm/io.h>
#include "ether_bf537.h"
DECLARE_GLOBAL_DATA_PTR;
#define POST_WORD_ADDR 0xFF903FFC
/*
@ -132,7 +134,6 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
long int initdram(int board_type)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef DEBUG
int brate;
char *tmp = getenv("baudrate");

View File

@ -29,6 +29,8 @@
#include <common.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
printf("CPU: ADSP BF561\n");
@ -39,7 +41,6 @@ int checkboard(void)
long int initdram(int board_type)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef DEBUG
int brate;
char *tmp = getenv("baudrate");

View File

@ -27,7 +27,7 @@
#include <i2c.h>
#include <usb.h>
#ifdef CONFIG_CMD_BSB
#ifdef CONFIG_CMD_BSP
int do_i2c(char *argv[])
{

View File

@ -31,6 +31,8 @@
#define MACH_TYPE_DAVINCI_EVM 901
DECLARE_GLOBAL_DATA_PTR;
extern void i2c_init(int speed, int slaveaddr);
extern void timer_init(void);
extern int eth_hw_init(void);
@ -115,8 +117,6 @@ void dsp_on(void)
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
@ -202,8 +202,6 @@ int misc_init_r (void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

View File

@ -31,6 +31,8 @@
#define MACH_TYPE_SCHMOOGIE 1255
DECLARE_GLOBAL_DATA_PTR;
extern void i2c_init(int speed, int slaveaddr);
extern void timer_init(void);
extern int eth_hw_init(void);
@ -115,8 +117,6 @@ void dsp_on(void)
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_SCHMOOGIE;
@ -244,8 +244,6 @@ int misc_init_r (void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

View File

@ -31,6 +31,8 @@
#define MACH_TYPE_SONATA 1254
DECLARE_GLOBAL_DATA_PTR;
extern void i2c_init(int speed, int slaveaddr);
extern void timer_init(void);
extern int eth_hw_init(void);
@ -115,8 +117,6 @@ void dsp_on(void)
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_SONATA;
@ -199,8 +199,6 @@ int misc_init_r (void)
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

View File

@ -229,6 +229,7 @@
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
#define CFG_ENV_OFFSET CFG_ENV_SECT_SIZE
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
#define CFG_DIRECT_FLASH_TFTP

View File

@ -25,10 +25,9 @@
#include <common.h>
#include <command.h>
#include <watchdog.h>
#include <asm/cache.h>
#ifdef CONFIG_FSL_PIXIS
#include <asm/cache.h>
#include "pixis.h"

View File

@ -204,7 +204,7 @@ int mii_discover_phy(struct eth_device *dev)
}
#endif /* CFG_DISCOVER_PHY */
int mii_init(void) __attribute__((weak,alias("__mii_init")));
void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{

View File

@ -203,7 +203,7 @@ int mii_discover_phy(struct eth_device *dev)
}
#endif /* CFG_DISCOVER_PHY */
int mii_init(void) __attribute__((weak,alias("__mii_init")));
void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{

View File

@ -221,7 +221,7 @@ int mii_discover_phy(struct eth_device *dev)
}
#endif /* CFG_DISCOVER_PHY */
int mii_init(void) __attribute__((weak,alias("__mii_init")));
void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{

View File

@ -33,10 +33,11 @@
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#ifndef CFG_8313ERDB_BROKEN_PMC
static void resume_from_sleep(void)
{
DECLARE_GLOBAL_DATA_PTR;
u32 magic = *(u32 *)0;
typedef void (*func_t)(void);

View File

@ -28,8 +28,7 @@
#include <common.h>
#include <clps7111.h>
/* ------------------------------------------------------------------------- */
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@ -37,8 +36,6 @@
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
/* Activate LED flasher */
IO_LEDFLSH = 0x40;
@ -53,8 +50,6 @@ int board_init (void)
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

View File

@ -200,7 +200,7 @@ int mii_discover_phy(struct eth_device *dev)
}
#endif /* CFG_DISCOVER_PHY */
int mii_init(void) __attribute__((weak,alias("__mii_init")));
void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{

View File

@ -200,7 +200,7 @@ int mii_discover_phy(struct eth_device *dev)
}
#endif /* CFG_DISCOVER_PHY */
int mii_init(void) __attribute__((weak,alias("__mii_init")));
void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{

View File

@ -201,7 +201,7 @@ int mii_discover_phy(struct eth_device *dev)
}
#endif /* CFG_DISCOVER_PHY */
int mii_init(void) __attribute__((weak,alias("__mii_init")));
void mii_init(void) __attribute__((weak,alias("__mii_init")));
void __mii_init(void)
{

View File

@ -38,6 +38,8 @@ extern void ft_cpu_setup (void *blob, bd_t *bd);
#undef DEBUG
DECLARE_GLOBAL_DATA_PTR;
extern void flush_data_cache (void);
extern void invalidate_l1_instruction_cache (void);
extern void tsi108_init_f (void);
@ -46,8 +48,6 @@ int display_mem_map (void);
void after_reloc (ulong dest_addr)
{
DECLARE_GLOBAL_DATA_PTR;
/*
* Jump to the main U-Boot board init code
*/

View File

@ -33,6 +33,8 @@
#include <asm/processor.h>
#include <tsi108.h>
DECLARE_GLOBAL_DATA_PTR;
extern void mpicInit (int verbose);
/*
@ -141,7 +143,6 @@ unsigned long get_board_bus_clk (void)
int board_early_init_f (void)
{
DECLARE_GLOBAL_DATA_PTR;
ulong i;
gd->mem_clk = 0;
@ -583,7 +584,6 @@ unsigned long get_l2cr (void)
int misc_init_r (void)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef CFG_CLK_SPREAD /* Initialize Spread-Spectrum Clock generation */
ulong i;

View File

@ -40,6 +40,8 @@ static uchar cs8900_chksum(ushort data)
#endif
DECLARE_GLOBAL_DATA_PTR;
extern void print_vcma9_info(void);
extern int vcma9_cantest(int);
extern int vcma9_nandtest(void);
@ -53,8 +55,6 @@ extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
DECLARE_GLOBAL_DATA_PTR;
if (strcmp(argv[1], "info") == 0)
{
print_vcma9_info();

View File

@ -35,7 +35,7 @@
#include <linux/mtd/nand.h>
#endif
/* ------------------------------------------------------------------------- */
DECLARE_GLOBAL_DATA_PTR;
#define FCLK_SPEED 1
@ -74,7 +74,6 @@ static inline void delay (unsigned long loops)
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
@ -128,8 +127,6 @@ int board_init (void)
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

View File

@ -31,8 +31,7 @@
#include <common.h>
#include <clps7111.h>
/* ------------------------------------------------------------------------- */
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscellaneous platform dependent initialisations
@ -40,8 +39,6 @@
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
/* arch number MACH_TYPE_ARMADILLO - not official*/
gd->bd->bi_arch_number = 83;
@ -53,8 +50,6 @@ int board_init (void)
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;

View File

@ -381,9 +381,11 @@ static struct pci_config_table pci_stxgp3_config_table[] = {
static struct pci_controller hose[] = {
#ifndef CONFIG_PCI_PNP
{ config_table: pci_stxgp3_config_table,},
#ifdef CONFIG_MPC85XX_PCI2
#else
{},
#endif
#ifdef CONFIG_MPC85XX_PCI2
{},
#endif
};

View File

@ -145,6 +145,7 @@ SECTIONS
. = ALIGN(256);
__init_end = .;
. = .;
__bss_start = .;
.bss :
{

View File

@ -43,6 +43,8 @@
#include "mt48lc16m16a2-75.h"
#endif
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_PS2MULT
void ps2mult_early_init(void);
#endif
@ -477,8 +479,6 @@ int silent_boot (void)
int board_early_init_f (void)
{
DECLARE_GLOBAL_DATA_PTR;
if (silent_boot())
gd->flags |= GD_FLG_SILENT;

View File

@ -161,7 +161,11 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
ulong addr, off, size;
char *cmd, *s;
nand_info_t *nand;
#ifdef CFG_NAND_QUIET
int quiet = CFG_NAND_QUIET;
#else
int quiet = 0;
#endif
const char *quiet_str = getenv("quiet");
/* at least two arguments please */
@ -452,7 +456,7 @@ U_BOOT_CMD(nand, 5, 1, do_nand,
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read[.jffs2] - addr off|partition size\n"
"nand write[.jffs2] - addr off|partiton size - read/write `size' bytes starting\n"
"nand write[.jffs2] - addr off|partition size - read/write `size' bytes starting\n"
" at offset `off' to/from memory address `addr'\n"
"nand erase [clean] [off size] - erase `size' bytes from\n"
" offset `off' (entire device if not specified)\n"

View File

@ -51,18 +51,7 @@
* a seperate section. Note that ENV_CRC is only defined when building
* U-Boot itself.
*/
#if (defined(CONFIG_CMI) || \
defined(CONFIG_FADS) || \
defined(CONFIG_HYMOD) || \
defined(CONFIG_ICU862) || \
defined(CONFIG_R360MPI) || \
defined(CONFIG_TQM8xxL) || \
defined(CONFIG_RRVISION) || \
defined(CONFIG_TRAB) || \
defined(CONFIG_PPCHAMELEONEVB) || \
defined(CONFIG_M5271EVB) || \
defined(CONFIG_IDMR) || \
defined(CONFIG_NAND_U_BOOT)) && \
#if (defined(CFG_USE_PPCENV) || defined(CONFIG_NAND_U_BOOT)) && \
defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */
/* XXX - This only works with GNU C */
# define __PPCENV__ __attribute__ ((section(".ppcenv")))

View File

@ -129,8 +129,6 @@ serial_puts (const char *s)
void serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
unsigned short divisor = 0;
switch (gd->baudrate) {

View File

@ -76,7 +76,6 @@ void calc_baud(void)
void serial_setbrg(void)
{
int i;
DECLARE_GLOBAL_DATA_PTR;
calc_baud();

View File

@ -22,6 +22,8 @@
#include <i2c.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#define bfin_read16(addr) ({ unsigned __v; \
__asm__ __volatile__ (\
"%0 = w[%1] (z);\n\t"\
@ -68,7 +70,6 @@
#ifdef DEBUG_I2C
#define PRINTD(fmt,args...) do { \
DECLARE_GLOBAL_DATA_PTR; \
if (gd->have_console) \
printf(fmt ,##args); \
} while (0)

View File

@ -52,6 +52,8 @@
#include <asm/io.h>
#include "serial.h"
DECLARE_GLOBAL_DATA_PTR;
unsigned long pll_div_fact;
void calc_baud(void)
@ -74,7 +76,6 @@ void calc_baud(void)
void serial_setbrg(void)
{
int i;
DECLARE_GLOBAL_DATA_PTR;
calc_baud();

View File

@ -52,6 +52,8 @@
#include "serial.h"
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
unsigned long pll_div_fact;
void calc_baud(void)
@ -74,7 +76,6 @@ void calc_baud(void)
void serial_setbrg(void)
{
int i;
DECLARE_GLOBAL_DATA_PTR;
calc_baud();

View File

@ -31,6 +31,8 @@
#include <asm/immap.h>
DECLARE_GLOBAL_DATA_PTR;
int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
{
volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
@ -48,8 +50,6 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
int checkcpu(void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
u16 msk;
u16 id = 0;

View File

@ -30,6 +30,8 @@
#include <asm/immap.h>
DECLARE_GLOBAL_DATA_PTR;
/* PLL min/max specifications */
#define MAX_FVCO 500000 /* KHz */
#define MAX_FSYS 80000 /* KHz */
@ -208,8 +210,6 @@ int clock_pll(int fsys, int flags)
*/
int get_clocks(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000;
gd->cpu_clk = (gd->bus_clk * 3);
return (0);

View File

@ -29,6 +29,8 @@
#include <common.h>
#include <mpc86xx.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Breathe some life into the CPU...
*
@ -38,7 +40,6 @@
void cpu_init_f(void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_lbc_t *memctl = &immap->im_lbc;

View File

@ -29,6 +29,7 @@
#include <mpc86xx.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
void get_sys_info(sys_info_t *sysInfo)
{
@ -96,7 +97,6 @@ void get_sys_info(sys_info_t *sysInfo)
int get_clocks(void)
{
DECLARE_GLOBAL_DATA_PTR;
sys_info_t sys_info;
get_sys_info(&sys_info);

View File

@ -34,6 +34,8 @@
#include <command.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_KGDB)
int (*debugger_exception_handler)(struct pt_regs *) = 0;
#endif
@ -50,8 +52,6 @@ extern unsigned long search_exception_table(unsigned long);
void
print_backtrace(unsigned long *sp)
{
DECLARE_GLOBAL_DATA_PTR;
int cnt = 0;
unsigned long i;

View File

@ -210,9 +210,12 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
if (!opts->quiet) {
unsigned long long n =(unsigned long long)
(erase.addr+meminfo->erasesize-opts->offset)
* 100;
int percent = (int)do_div(n, erase_length);
(erase.addr + meminfo->erasesize - opts->offset)
* 100;
int percent;
do_div(n, erase_length);
percent = (int)n;
/* output progress message only at whole percent
* steps to reduce the number of messages printed
@ -478,7 +481,11 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts)
if (!opts->quiet) {
unsigned long long n = (unsigned long long)
(opts->length-imglen) * 100;
int percent = (int)do_div(n, opts->length);
int percent;
do_div(n, opts->length);
percent = (int)n;
/* output progress message only at whole percent
* steps to reduce the number of messages printed
* on (slow) serial consoles
@ -653,7 +660,11 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts)
if (!opts->quiet) {
unsigned long long n = (unsigned long long)
(opts->length-imglen) * 100;
int percent = (int)do_div(n ,opts->length);
int percent;
do_div(n, opts->length);
percent = (int)n;
/* output progress message only at whole percent
* steps to reduce the number of messages printed
* on (slow) serial consoles

View File

@ -30,6 +30,8 @@
qe_map_t *qe_immr = NULL;
static qe_snum_t snums[QE_NUM_OF_SNUM];
DECLARE_GLOBAL_DATA_PTR;
void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
{
u32 cecr;
@ -51,8 +53,6 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data)
uint qe_muram_alloc(uint size, uint align)
{
DECLARE_GLOBAL_DATA_PTR;
uint retloc;
uint align_mask, off;
uint savebase;
@ -158,8 +158,6 @@ void qe_put_snum(u8 snum)
void qe_init(uint qe_base)
{
DECLARE_GLOBAL_DATA_PTR;
/* Init the QE IMMR base */
qe_immr = (qe_map_t *)qe_base;
@ -204,7 +202,6 @@ void qe_assign_page(uint snum, uint para_ram_base)
int qe_set_brg(uint brg, uint rate)
{
DECLARE_GLOBAL_DATA_PTR;
volatile uint *bp;
u32 divisor;
int div16 = 0;

View File

@ -1262,10 +1262,10 @@ uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
case MIIM_LXT971_SR2_100HDX:
priv->speed = 100;
priv->duplexity = 0;
break;
default:
priv->speed = 100;
priv->duplexity = 1;
break;
}
} else {
priv->speed = 0;

View File

@ -64,6 +64,8 @@
#include "usbdcore_mpc8xx.h"
#include "usbdcore_ep0.h"
DECLARE_GLOBAL_DATA_PTR;
#define ERR(fmt, args...)\
serial_printf("ERROR : [%s] %s:%d: "fmt,\
__FILE__,__FUNCTION__,__LINE__, ##args)
@ -1216,7 +1218,6 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
#elif defined(CFG_USB_BRGCLK)
/* This has been tested with brgclk == 50MHz */
DECLARE_GLOBAL_DATA_PTR;
int divisor = 0;
if (gd->cpu_clk < 48000000L) {

View File

@ -158,7 +158,8 @@
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_QUIET 1
/*-----------------------------------------------------------------------
* PCI stuff

View File

@ -399,6 +399,8 @@
#define CFG_ENV_ADDR_REDUND 0xFFFFA000
#define CFG_ENV_SIZE_REDUND 0x2000
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
#define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */
#define CFG_NVRAM_SIZE 242 /* NVRAM size */

View File

@ -165,7 +165,8 @@
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_QUIET 1
/*-----------------------------------------------------------------------
* PCI stuff

View File

@ -206,6 +206,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Cache Configuration

View File

@ -156,6 +156,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Cache Configuration

View File

@ -39,28 +39,44 @@
#undef CONFIG_8xx_CONS_SMC1
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 19200
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BOOTCOMMAND "bootm 40020000" /* autoboot command */
#define CONFIG_BAUDRATE 115200
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOARD_TYPES 1 /* support board types */
#define CONFIG_BOOTARGS "root=/dev/nfs rw " \
"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \
"nfsaddrs=10.0.0.99:10.0.0.2"
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"flash_nfs=run nfsargs addip;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/fps850L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
* BOOTP options
*/
@ -80,24 +96,32 @@
#define CONFIG_BOOTP_NTPSERVER
#define CONFIG_BOOTP_TIMEOFFSET
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_CONSOLE
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_LOADB
#undef CONFIG_CMD_CACHE
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else

View File

@ -40,18 +40,37 @@
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 115200
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BOOTCOMMAND "bootm 40040000" /* autoboot command */
#define CONFIG_BOARD_TYPES 1 /* support board types */
#define CONFIG_BOOTARGS "root=/dev/nfs rw " \
"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \
"nfsaddrs=10.0.0.99:10.0.0.2"
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"flash_nfs=run nfsargs addip;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/fps850L/uImage\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
@ -79,11 +98,11 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
@ -95,7 +114,14 @@
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else

View File

@ -217,7 +217,8 @@
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_QUIET 1
/*-----------------------------------------------------------------------
* PCI stuff

View File

@ -157,7 +157,8 @@
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_QUIET 1
/*-----------------------------------------------------------------------
* PCI stuff

View File

@ -234,6 +234,7 @@
#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment sector */
#define CFG_ENV_SIZE 0x4000 /* Used Size of Environment Sector */
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Cache Configuration

View File

@ -54,13 +54,12 @@
*/
#ifndef CONFIG_MONITOR_IS_IN_RAM
#define CFG_ENV_OFFSET 0x4000
#define CFG_ENV_SECT_SIZE 0x2000
#define CFG_ENV_IS_IN_FLASH 1
#else
#define CFG_ENV_ADDR 0xffe04000
#endif
#define CFG_ENV_SECT_SIZE 0x2000
#define CFG_ENV_IS_IN_FLASH 1
#endif
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*
* BOOTP options

View File

@ -177,7 +177,8 @@
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_QUIET 1
/*-----------------------------------------------------------------------
* PCI stuff

View File

@ -429,6 +429,8 @@
#define CFG_ENV_ADDR_REDUND 0xFFFFA000
#define CFG_ENV_SIZE_REDUND 0x2000
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
#endif /* ENVIRONMENT_IN_EEPROM */

View File

@ -233,6 +233,7 @@
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment */
#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment sector */
#define CFG_ENV_SIZE 0x4000 /* Used Size of Environment sector */
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Cache Configuration

View File

@ -235,6 +235,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Cache Configuration
*/

View File

@ -70,8 +70,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM823L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -205,6 +206,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -70,8 +70,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM823M/uImage\0" \
"kernel_addr=40080000\0" \
"ramdisk_addr=40180000\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -202,6 +203,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -66,8 +66,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM850L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -192,6 +193,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -64,8 +64,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM850M/uImage\0" \
"kernel_addr=40080000\0" \
"ramdisk_addr=40180000\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -191,6 +192,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -69,8 +69,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM855L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -196,6 +197,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -69,8 +69,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM855M/uImage\0" \
"kernel_addr=40080000\0" \
"ramdisk_addr=40180000\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -231,6 +232,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -69,8 +69,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM860L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -199,6 +200,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -69,8 +69,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM860M/uImage\0" \
"kernel_addr=40080000\0" \
"ramdisk_addr=40180000\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -198,6 +199,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -72,8 +72,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM862L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
"fdt_addr=40040000\0" \
"kernel_addr=40060000\0" \
"ramdisk_addr=40200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -200,6 +201,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -72,8 +72,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM862M/uImage\0" \
"kernel_addr=40080000\0" \
"ramdisk_addr=40180000\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -201,6 +202,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -81,8 +81,9 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM866M/uImage\0" \
"kernel_addr=40080000\0" \
"ramdisk_addr=40180000\0" \
"fdt_addr=40080000\0" \
"kernel_addr=400A0000\0" \
"ramdisk_addr=40280000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@ -241,6 +242,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -163,7 +163,8 @@
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CFG_NAND_QUIET 1
/*-----------------------------------------------------------------------
* PCI stuff

View File

@ -183,10 +183,9 @@
#define CFG_LONGHELP 1
#define CFG_MEMTEST_START \
({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
({ gd->bd->bi_dram[0].start; })
#define CFG_MEMTEST_END \
({ \
DECLARE_GLOBAL_DATA_PTR; \
gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; \
})
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }

View File

@ -171,8 +171,9 @@
#define CFG_ENV_IS_IN_FLASH 1
#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */
#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */
#define CFG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */
#define CFG_ENV_SIZE 0x00010000 /* Set whole sector as env */
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
#endif
/*-----------------------------------------------------------------------

View File

@ -406,6 +406,7 @@
#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */
#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Cache Configuration

View File

@ -125,6 +125,8 @@
#define CFG_ENV_IS_IN_FLASH
#endif /* !CONFIG_MONITOR_IS_IN_RAM */
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
#define CFG_PROMPT "=> "
#define CFG_LONGHELP /* undef to save memory */

View File

@ -419,6 +419,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/* Initial value of the on-board touch screen brightness */
#define CFG_BRIGHTNESS 0x20

View File

@ -207,6 +207,8 @@
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*-----------------------------------------------------------------------
* Hardware Information Block
*/

View File

@ -42,6 +42,8 @@
int post_flag;
#endif
DECLARE_GLOBAL_DATA_PTR;
#ifndef CFG_NO_FLASH
extern flash_info_t flash_info[];
#endif
@ -126,8 +128,6 @@ static void display_flash_config(ulong size)
static int init_baudrate(void)
{
DECLARE_GLOBAL_DATA_PTR;
char tmp[64];
int i = getenv_r("baudrate", tmp, sizeof(tmp));
gd->bd->bi_baudrate = gd->baudrate = (i > 0)
@ -139,7 +139,6 @@ static int init_baudrate(void)
#ifdef DEBUG
static void display_global_data(void)
{
DECLARE_GLOBAL_DATA_PTR;
bd_t *bd;
bd = gd->bd;
printf("--flags:%x\n", gd->flags);
@ -256,7 +255,6 @@ void init_cplbtables(void)
void board_init_f(ulong bootflag)
{
DECLARE_GLOBAL_DATA_PTR;
ulong addr;
bd_t *bd;
int i;
@ -325,7 +323,6 @@ static int init_func_i2c(void)
void board_init_r(gd_t * id, ulong dest_addr)
{
DECLARE_GLOBAL_DATA_PTR;
ulong size;
extern void malloc_bin_reloc(void);
char *s, *e;

View File

@ -32,14 +32,14 @@
#ifdef CONFIG_POST
DECLARE_GLOBAL_DATA_PTR;
#define POST_MAX_NUMBER 32
#define BOOTMODE_MAGIC 0xDEAD0000
int post_init_f(void)
{
DECLARE_GLOBAL_DATA_PTR;
int res = 0;
unsigned int i;
@ -62,7 +62,6 @@ int post_init_f(void)
void post_bootmode_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
int bootmode = post_bootmode_get(0);
int newword;
@ -109,20 +108,17 @@ int post_bootmode_get(unsigned int *last_test)
/* POST tests run before relocation only mark status bits .... */
static void post_log_mark_start(unsigned long testid)
{
DECLARE_GLOBAL_DATA_PTR;
gd->post_log_word |= (testid) << 16;
}
static void post_log_mark_succ(unsigned long testid)
{
DECLARE_GLOBAL_DATA_PTR;
gd->post_log_word |= testid;
}
/* ... and the messages are output once we are relocated */
void post_output_backlog(void)
{
DECLARE_GLOBAL_DATA_PTR;
int j;
for (j = 0; j < post_list_size; j++) {
@ -372,8 +368,6 @@ int post_log(char *format, ...)
void post_reloc(void)
{
DECLARE_GLOBAL_DATA_PTR;
unsigned int i;
/*

View File

@ -541,11 +541,11 @@ restart:
case NETLOOP_SUCCESS:
if (NetBootFileXferSize > 0) {
char buf[10];
char buf[20];
printf("Bytes transferred = %ld (%lx hex)\n",
NetBootFileXferSize,
NetBootFileXferSize);
sprintf(buf, "%lx", NetBootFileXferSize);
sprintf(buf, "%lX", NetBootFileXferSize);
setenv("filesize", buf);
sprintf(buf, "%lX", (unsigned long)load_addr);