mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-01 08:33:31 +08:00
Code Issues Packages Projects Releases Wiki Activity

Exynos5420: Remove code for enabling read leveling

Browse Source 
This patch intends to remove all code which enables hardware read
leveling. All characterization environments may not cope up with
h/w read leveling enabled, so we must disable this.
Also, disabling h/w read leveling improves the MIF LVcc value
(LVcc value is the value at which DDR will fail to work properly).
Improving LVcc means we have enough voltage margin for MIF.
When h/w leveling is enabled, we have almost zero volatge margin.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
This commit is contained in:
Akshay Saraswat 2014-05-26 19:18:06 +05:30 committed by Minkyu Kang
parent cfde7588d8
commit aacdd79095
1 changed files with 0 additions and 71 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

71
arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
View File

@ -519,77 +519,6 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
&drex1->directcmd);
}
if (mem->read_leveling_enable) {
/* Set Read DQ Calibration */
val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
for (chip = 0; chip < mem->chips_to_configure; chip++) {
writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
&drex0->directcmd);
writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
&drex1->directcmd);
}
val = readl(&phy0_ctrl->phy_con1);
val |= READ_LEVELLING_DDR3;
writel(val, &phy0_ctrl->phy_con1);
val = readl(&phy1_ctrl->phy_con1);
val |= READ_LEVELLING_DDR3;
writel(val, &phy1_ctrl->phy_con1);
val = readl(&phy0_ctrl->phy_con2);
val |= (RDLVL_EN | RDLVL_INCR_ADJ);
writel(val, &phy0_ctrl->phy_con2);
val = readl(&phy1_ctrl->phy_con2);
val |= (RDLVL_EN | RDLVL_INCR_ADJ);
writel(val, &phy1_ctrl->phy_con2);
setbits_le32(&drex0->rdlvl_config,
CTRL_RDLVL_DATA_ENABLE);
i = TIMEOUT;
while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO)
!= RDLVL_COMPLETE_CHO) && (i > 0)) {
/*
* TODO(waihong): Comment on how long this take
* to timeout
*/
sdelay(100);
i--;
}
if (!i)
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
clrbits_le32(&drex0->rdlvl_config,
CTRL_RDLVL_DATA_ENABLE);
setbits_le32(&drex1->rdlvl_config,
CTRL_RDLVL_DATA_ENABLE);
i = TIMEOUT;
while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO)
!= RDLVL_COMPLETE_CHO) && (i > 0)) {
/*
* TODO(waihong): Comment on how long this take
* to timeout
*/
sdelay(100);
i--;
}
if (!i)
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
clrbits_le32(&drex1->rdlvl_config,
CTRL_RDLVL_DATA_ENABLE);
val = (0x3 << DIRECT_CMD_BANK_SHIFT);
for (chip = 0; chip < mem->chips_to_configure; chip++) {
writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
&drex0->directcmd);
writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
&drex1->directcmd);
}
update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3);
update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3);
}
/* Common Settings for Leveling */
val = PHY_CON12_RESET_VAL;
writel((val + n_lock_w_phy0), &phy0_ctrl->phy_con12);