mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-25 13:14:19 +08:00
arm64: dts: rockchip: Add support for Khadas Edge
Add devicetree support for Khadas Edge. Khadas Edge is an expandable Rockchip RK3399 board with goldfinger. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP - USB 3.0, 2.0 - USB Type C power and data - 16MB SPI Flash - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Nick Xie
Kever Yang
parent
16593ccd07
commit
a839828fa1
@ -108,6 +108,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
|
||||
rk3399-ficus.dtb \
|
||||
rk3399-firefly.dtb \
|
||||
rk3399-gru-bob.dtb \
|
||||
rk3399-khadas-edge.dtb \
|
||||
rk3399-nanopc-t4.dtb \
|
||||
rk3399-nanopi-m4.dtb \
|
||||
rk3399-nanopi-neo4.dtb \
|
||||
|
||||
13
arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
Normal file
13
arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
Normal file
@ -0,0 +1,13 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2019 Nick Xie <nick@khadas.com>
|
||||
*/
|
||||
|
||||
#include "rk3399-u-boot.dtsi"
|
||||
#include "rk3399-sdram-lpddr4-100.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
|
||||
};
|
||||
};
|
||||
13
arch/arm/dts/rk3399-khadas-edge.dts
Normal file
13
arch/arm/dts/rk3399-khadas-edge.dts
Normal file
@ -0,0 +1,13 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
|
||||
* (https://www.khadas.com)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399-khadas-edge.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Khadas Edge";
|
||||
compatible = "khadas,edge", "rockchip,rk3399";
|
||||
};
|
||||
804
arch/arm/dts/rk3399-khadas-edge.dtsi
Normal file
804
arch/arm/dts/rk3399-khadas-edge.dtsi
Normal file
@ -0,0 +1,804 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
|
||||
* (https://www.khadas.com)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vsys_3v3>;
|
||||
};
|
||||
|
||||
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vsys_5v0>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
vin-supply = <&vsys_3v3>;
|
||||
};
|
||||
|
||||
vsys: vsys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vsys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vsys_3v3: vsys-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vsys_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vsys>;
|
||||
};
|
||||
|
||||
vsys_5v0: vsys-5v0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vsys_5v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vsys>;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <18000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwrbtn>;
|
||||
|
||||
power {
|
||||
debounce-interval = <100>;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "GPIO Key Power";
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
|
||||
|
||||
sys-led {
|
||||
label = "sys_led";
|
||||
linux,default-trigger = "heartbeat";
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
user-led {
|
||||
label = "user_led";
|
||||
default-state = "off";
|
||||
gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 150 200 255>;
|
||||
#cooling-cells = <2>;
|
||||
fan-supply = <&vsys_5v0>;
|
||||
pwms = <&pwm0 0 40000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_thermal {
|
||||
trips {
|
||||
cpu_warm: cpu_warm {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_hot: cpu_hot {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map2 {
|
||||
trip = <&cpu_warm>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map3 {
|
||||
trip = <&cpu_hot>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu_thermal {
|
||||
trips {
|
||||
gpu_warm: gpu_warm {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
gpu_hot: gpu_hot {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map1 {
|
||||
trip = <&gpu_warm>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map2 {
|
||||
trip = <&gpu_hot>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vsys_3v3>;
|
||||
vcc2-supply = <&vsys_3v3>;
|
||||
vcc3-supply = <&vsys_3v3>;
|
||||
vcc4-supply = <&vsys_3v3>;
|
||||
vcc6-supply = <&vsys_3v3>;
|
||||
vcc7-supply = <&vsys_3v3>;
|
||||
vcc8-supply = <&vsys_3v3>;
|
||||
vcc9-supply = <&vsys_3v3>;
|
||||
vcc10-supply = <&vsys_3v3>;
|
||||
vcc11-supply = <&vsys_3v3>;
|
||||
vcc12-supply = <&vsys_3v3>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_apio2: LDO_REG1 {
|
||||
regulator-name = "vcc1v8_apio2";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_vldo2: LDO_REG2 {
|
||||
regulator-name = "vcc_vldo2";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmupll: LDO_REG3 {
|
||||
regulator-name = "vcc1v8_pmupll";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG4 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_vldo5: LDO_REG5 {
|
||||
regulator-name = "vcc_vldo5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_codec: LDO_REG7 {
|
||||
regulator-name = "vcc1v8_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cpu_b_sleep>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vsys_3v3>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpu_sleep>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vsys_3v3>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <160>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
rockchip,playback-channels = <2>;
|
||||
rockchip,capture-channels = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
bt656-supply = <&vcc1v8_apio2>;
|
||||
audio-supply = <&vcc1v8_codec>;
|
||||
sdmmc-supply = <&vccio_sd>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu1830-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_reg_on_h: bt-reg-on-h {
|
||||
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
buttons {
|
||||
pwrbtn: pwrbtn {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
sys_led_gpio: sys_led-gpio {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
user_led_gpio: user_led-gpio {
|
||||
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
cpu_b_sleep: cpu-b-sleep {
|
||||
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
gpu_sleep: gpu-sleep {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_host_wake_l: wifi-host-wake-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
/* WiFi & BT combo module Ampak AP6356S */
|
||||
bus-width = <4>;
|
||||
cap-sdio-irq;
|
||||
cap-sd-highspeed;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vcc1v8_s3>;
|
||||
vmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
brcm,drive-strength = <5>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <4000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
|
||||
vbat-supply = <&vsys_3v3>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
|
||||
F: configs/evb-rk3399_defconfig
|
||||
F: configs/firefly-rk3399_defconfig
|
||||
|
||||
KHADAS-EDGE
|
||||
M: Nick Xie <nick@khadas.com>
|
||||
S: Maintained
|
||||
F: configs/khadas-edge-rk3399_defconfig
|
||||
F: arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
|
||||
|
||||
NANOPC-T4
|
||||
M: Jagan Teki <jagan@amarulasolutions.com>
|
||||
S: Maintained
|
||||
|
||||
59
configs/khadas-edge-rk3399_defconfig
Normal file
59
configs/khadas-edge-rk3399_defconfig
Normal file
@ -0,0 +1,59 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_SYS_TEXT_BASE=0x00200000
|
||||
CONFIG_ROCKCHIP_RK3399=y
|
||||
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_SPL_STACK_R_ADDR=0x80000
|
||||
CONFIG_DEBUG_UART_BASE=0xFF1A0000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge.dtb"
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
|
||||
CONFIG_TPL=y
|
||||
CONFIG_SYS_PROMPT="kedge# "
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3399-khadas-edge"
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_GMAC_ROCKCHIP=y
|
||||
CONFIG_PMIC_RK8XX=y
|
||||
CONFIG_REGULATOR_PWM=y
|
||||
CONFIG_REGULATOR_RK8XX=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_RAM_RK3399_LPDDR4=y
|
||||
CONFIG_BAUDRATE=1500000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_GENERIC=y
|
||||
CONFIG_USB_HOST_ETHER=y
|
||||
CONFIG_USB_ETHER_ASIX=y
|
||||
CONFIG_USB_ETHER_ASIX88179=y
|
||||
CONFIG_USB_ETHER_MCS7830=y
|
||||
CONFIG_USB_ETHER_RTL8152=y
|
||||
CONFIG_USB_ETHER_SMSC95XX=y
|
||||
CONFIG_SPL_TINY_MEMSET=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
Loading…
Reference in New Issue
Block a user