diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 5566310d948..aae3f096b23 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -14,7 +14,6 @@ endif obj-$(CONFIG_TI816X) += clock_ti816x.o obj-y += sys_info.o -obj-y += mem.o obj-y += ddr.o obj-y += emif4.o obj-y += board.o diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c deleted file mode 100644 index 56c9e7dbceb..00000000000 --- a/arch/arm/cpu/armv7/am33xx/mem.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * (C) Copyright 2010 - * Texas Instruments, - * - * Author : - * Mansoor Ahamed - * - * Initial Code from: - * Manikandan Pillai - * Richard Woodruff - * Syed Mohammed Khasim - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -struct gpmc *gpmc_cfg; - - -void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, - u32 size) -{ - writel(0, &cs->config7); - sdelay(1000); - /* Delay for settling */ - writel(gpmc_config[0], &cs->config1); - writel(gpmc_config[1], &cs->config2); - writel(gpmc_config[2], &cs->config3); - writel(gpmc_config[3], &cs->config4); - writel(gpmc_config[4], &cs->config5); - writel(gpmc_config[5], &cs->config6); - /* Enable the config */ - writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | - (1 << 6)), &cs->config7); - sdelay(2000); -} - -/***************************************************** - * gpmc_init(): init gpmc bus - * Init GPMC for x16, MuxMode (SDRAM in x32). - * This code can only be executed from SRAM or SDRAM. - *****************************************************/ -void gpmc_init(void) -{ - /* putting a blanket check on GPMC based on ZeBu for now */ - gpmc_cfg = (struct gpmc *)GPMC_BASE; -#if defined(CONFIG_NOR) -/* configure GPMC for NOR */ - const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1, - STNOR_GPMC_CONFIG2, - STNOR_GPMC_CONFIG3, - STNOR_GPMC_CONFIG4, - STNOR_GPMC_CONFIG5, - STNOR_GPMC_CONFIG6, - STNOR_GPMC_CONFIG7 - }; - u32 size = GPMC_SIZE_16M; - u32 base = CONFIG_SYS_FLASH_BASE; -#elif defined(CONFIG_NAND) -/* configure GPMC for NAND */ - const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, - M_NAND_GPMC_CONFIG2, - M_NAND_GPMC_CONFIG3, - M_NAND_GPMC_CONFIG4, - M_NAND_GPMC_CONFIG5, - M_NAND_GPMC_CONFIG6, - 0 - }; - u32 size = GPMC_SIZE_256M; - u32 base = CONFIG_SYS_NAND_BASE; -#else - const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 }; - u32 size = 0; - u32 base = 0; -#endif - /* global settings */ - writel(0x00000008, &gpmc_cfg->sysconfig); - writel(0x00000000, &gpmc_cfg->irqstatus); - writel(0x00000000, &gpmc_cfg->irqenable); -#ifdef CONFIG_NOR - writel(0x00000200, &gpmc_cfg->config); -#else - writel(0x00000012, &gpmc_cfg->config); -#endif - /* - * Disable the GPMC0 config set by ROM code - */ - writel(0, &gpmc_cfg->cs[0].config7); - sdelay(1000); - /* enable chip-select specific configurations */ - enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size); -} diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 59f5352b26d..5f5132f6617 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -27,8 +27,4 @@ obj-y += boot-common.o obj-y += lowlevel_init.o endif -ifndef CONFIG_SPL_BUILD -ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) obj-y += mem-common.o -endif -endif diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c index afc1bc185e4..944ef840a16 100644 --- a/arch/arm/cpu/armv7/omap-common/mem-common.c +++ b/arch/arm/cpu/armv7/omap-common/mem-common.c @@ -2,31 +2,136 @@ * (C) Copyright 2010 * Texas Instruments, * - * Steve Sakoman + * Author : + * Mansoor Ahamed + * + * Initial Code from: + * Manikandan Pillai + * Richard Woodruff + * Syed Mohammed Khasim * * SPDX-License-Identifier: GPL-2.0+ */ +#include +#include #include +#include #include +#include +#include struct gpmc *gpmc_cfg; +#if defined(CONFIG_OMAP34XX) +/******************************************************** + * mem_ok() - test used to see if timings are correct + * for a part. Helps in guessing which part + * we are currently using. + *******************************************************/ +u32 mem_ok(u32 cs) +{ + u32 val1, val2, addr; + u32 pattern = 0x12345678; + + addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs); + + writel(0x0, addr + 0x400); /* clear pos A */ + writel(pattern, addr); /* pattern to pos B */ + writel(0x0, addr + 4); /* remove pattern off the bus */ + val1 = readl(addr + 0x400); /* get pos A value */ + val2 = readl(addr); /* get val2 */ + writel(0x0, addr + 0x400); /* clear pos A */ + + if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ + return 0; + else + return 1; +} +#endif + +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size) +{ + writel(0, &cs->config7); + sdelay(1000); + /* Delay for settling */ + writel(gpmc_config[0], &cs->config1); + writel(gpmc_config[1], &cs->config2); + writel(gpmc_config[2], &cs->config3); + writel(gpmc_config[3], &cs->config4); + writel(gpmc_config[4], &cs->config5); + writel(gpmc_config[5], &cs->config6); + /* Enable the config */ + writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | + (1 << 6)), &cs->config7); + sdelay(2000); +} + /***************************************************** * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). * This code can only be executed from SRAM or SDRAM. *****************************************************/ void gpmc_init(void) { + /* putting a blanket check on GPMC based on ZeBu for now */ gpmc_cfg = (struct gpmc *)GPMC_BASE; - +#if defined(CONFIG_NOR) +/* configure GPMC for NOR */ + const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1, + STNOR_GPMC_CONFIG2, + STNOR_GPMC_CONFIG3, + STNOR_GPMC_CONFIG4, + STNOR_GPMC_CONFIG5, + STNOR_GPMC_CONFIG6, + STNOR_GPMC_CONFIG7 + }; + u32 size = GPMC_SIZE_16M; + u32 base = CONFIG_SYS_FLASH_BASE; +#elif defined(CONFIG_NAND) +/* configure GPMC for NAND */ + const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, + 0 + }; + u32 size = GPMC_SIZE_256M; + u32 base = CONFIG_SYS_NAND_BASE; +#elif defined(CONFIG_CMD_ONENAND) + const u32 gpmc_regs[GPMC_MAX_REG] = { ONENAND_GPMC_CONFIG1, + ONENAND_GPMC_CONFIG2, + ONENAND_GPMC_CONFIG3, + ONENAND_GPMC_CONFIG4, + ONENAND_GPMC_CONFIG5, + ONENAND_GPMC_CONFIG6, + 0 + }; + u32 base = PISMO1_ONEN_BASE; + u32 size = PISMO1_ONEN_SIZE; +#else + const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 }; + u32 size = 0; + u32 base = 0; +#endif /* global settings */ - writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */ - writel(0, &gpmc_cfg->timeout_control);/* timeout disable */ - + writel(0x00000008, &gpmc_cfg->sysconfig); + writel(0x00000000, &gpmc_cfg->irqstatus); + writel(0x00000000, &gpmc_cfg->irqenable); + writel(0x00000000, &gpmc_cfg->timeout_control); +#ifdef CONFIG_NOR + writel(0x00000200, &gpmc_cfg->config); +#else + writel(0x00000012, &gpmc_cfg->config); +#endif /* * Disable the GPMC0 config set by ROM code - * It conflicts with our MPDB (both at 0x08000000) */ writel(0, &gpmc_cfg->cs[0].config7); + sdelay(1000); + /* enable chip-select specific configurations */ + enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size); } diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile index 39ff2575bc5..cf860463532 100644 --- a/arch/arm/cpu/armv7/omap3/Makefile +++ b/arch/arm/cpu/armv7/omap3/Makefile @@ -9,7 +9,6 @@ obj-y := lowlevel_init.o obj-y += board.o obj-y += clock.o -obj-y += mem.o obj-y += sys_info.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_OMAP3_ID_NAND) += spl_id_nand.o diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 18041913c41..bdb1435291a 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -344,6 +344,7 @@ enum { * MAP - Map this CS to which address(GPMC address space)- Absolute address * >>24 before being used. */ +#define GPMC_SIZE_256M 0x0 #define GPMC_SIZE_128M 0x8 #define GPMC_SIZE_64M 0xC #define GPMC_SIZE_32M 0xE