From a023c3c2c8eb7afa7b1f0cea2690d9b02cf4cb1b Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Fri, 20 Mar 2020 14:37:07 +0800 Subject: [PATCH] armv8: ls1028a: clean up the environment variables Move the environment variables from command head file to ls1028ardb specific head file so that they will not mess up with ls1028aqds board. Also updated some variable slightly. There is no function change by this patch. Signed-off-by: Yuantian Tang Signed-off-by: Priyanka Jain --- include/configs/ls1028a_common.h | 86 ------------------------------- include/configs/ls1028ardb.h | 88 ++++++++++++++++++++++++++++++++ 2 files changed, 88 insertions(+), 86 deletions(-) diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 2a38e9106e3..6905694d102 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -74,92 +74,6 @@ func(DHCP, dhcp, na) #include -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "board=ls1028ardb\0" \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "ramdisk_addr=0x800000\0" \ - "ramdisk_size=0x2000000\0" \ - "bootm_size=0x10000000\0" \ - "fdt_addr=0x00f00000\0" \ - "kernel_addr=0x01000000\0" \ - "scriptaddr=0x80000000\0" \ - "scripthdraddr=0x80080000\0" \ - "fdtheader_addr_r=0x80100000\0" \ - "kernelheader_addr_r=0x80200000\0" \ - "load_addr=0xa0000000\0" \ - "kernel_addr_r=0x81000000\0" \ - "fdt_addr_r=0x90000000\0" \ - "ramdisk_addr_r=0xa0000000\0" \ - "kernel_start=0x1000000\0" \ - "kernelheader_start=0x600000\0" \ - "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" \ - "kernelheader_size=0x40000\0" \ - "kernel_addr_sd=0x8000\0" \ - "kernel_size_sd=0x14000\0" \ - "kernelhdr_addr_sd=0x3000\0" \ - "kernelhdr_size_sd=0x20\0" \ - "console=ttyS0,115200\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - BOOTENV \ - "boot_scripts=ls1028ardb_boot.scr\0" \ - "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \ - "scan_dev_for_boot_part=" \ - "part list ${devtype} ${devnum} devplist; " \ - "env exists devplist || setenv devplist 1; " \ - "for distro_bootpart in ${devplist}; do " \ - "if fstype ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "bootfstype; then " \ - "run scan_dev_for_boot; " \ - "fi; " \ - "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ - "boot_a_script=" \ - "load ${devtype} ${devnum}:${distro_bootpart} " \ - "${scriptaddr} ${prefix}${script}; " \ - "env exists secureboot && load ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ - "&& esbc_validate ${scripthdraddr};" \ - "source ${scriptaddr}\0" \ - "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ - "sf probe 0:0 && sf read $load_addr " \ - "$kernel_start $kernel_size ; env exists secureboot &&" \ - "sf read $kernelheader_addr_r $kernelheader_start " \ - "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ - " bootm $load_addr#$board\0" \ - "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ - "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ - "&& hdp load $load_addr 0x2000\0" \ - "sd_bootcmd=echo Trying load from SD ...;" \ - "mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ - "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ - "&& hdp load $load_addr 0x2000\0" \ - "emmc_bootcmd=echo Trying load from EMMC ..;" \ - "mmcinfo; mmc dev 1; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ - "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ - "&& hdp load $load_addr 0x2000\0" - #undef CONFIG_BOOTCOMMAND #define XSPI_NOR_BOOTCOMMAND \ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index a4c3d73d2a1..0f289cb0780 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -72,4 +72,92 @@ #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 +/* Initial environment variables */ +#ifndef SPL_NO_ENV +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "board=ls1028ardb\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "bootm_size=0x10000000\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "kernel_start=0x1000000\0" \ + "kernelheader_start=0x600000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernel_size_sd=0x14000\0" \ + "kernelhdr_addr_sd=0x3000\0" \ + "kernelhdr_size_sd=0x20\0" \ + "console=ttyS0,115200\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + BOOTENV \ + "boot_scripts=ls1028ardb_boot.scr\0" \ + "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ + "sf probe 0:0 && sf read $load_addr " \ + "$kernel_start $kernel_size ; env exists secureboot &&" \ + "sf read $kernelheader_addr_r $kernelheader_start " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + " bootm $load_addr#$board\0" \ + "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ + "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ + "&& hdp load $load_addr 0x2000\0" \ + "sd_bootcmd=echo Trying load from SD ...;" \ + "mmc dev 0;mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ + "mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmc dev 1;mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ + "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ + "&& hdp load $load_addr 0x2000\0" +#endif #endif /* __LS1028A_RDB_H */