mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2025-01-24 11:43:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

dm: arm: ls1021a: add i2c DM support

Browse Source 
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1021A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
This commit is contained in:
Biwen Li 2019-12-31 15:33:44 +08:00 committed by Priyanka Jain
parent a0affb367a
commit 9ebde8849a
29 changed files with 330 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

96
board/freescale/common/dcu_sii9022a.c
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*/
#include <asm/io.h>
@ -63,7 +64,101 @@ int dcu_set_dvi_encoder(struct fb_videomode *videomode)
u8 temp;
u16 temp1, temp2;
u32 temp3;
#ifdef CONFIG_DM_I2C
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_DVI_BUS_NUM,
CONFIG_SYS_I2C_DVI_ADDR,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
CONFIG_SYS_I2C_DVI_BUS_NUM);
return ret;
}
/* Enable TPI transmitter mode */
temp = TPI_TRANS_MODE_ENABLE;
dm_i2c_write(dev, TPI_TRANS_MODE_REG, &temp, 1);
/* Enter into D0 state, full operation */
dm_i2c_read(dev, TPI_PWR_STAT_REG, &temp, 1);
temp &= ~TPI_PWR_STAT_MASK;
temp |= TPI_PWR_STAT_D0;
dm_i2c_write(dev, TPI_PWR_STAT_REG, &temp, 1);
/* Enable source termination */
temp = TPI_SET_PAGE_SII9022A;
dm_i2c_write(dev, TPI_SET_PAGE_REG, &temp, 1);
temp = TPI_SET_OFFSET_SII9022A;
dm_i2c_write(dev, TPI_SET_OFFSET_REG, &temp, 1);
dm_i2c_read(dev, TPI_RW_ACCESS_REG, &temp, 1);
temp |= TPI_RW_EN_SRC_TERMIN;
dm_i2c_write(dev, TPI_RW_ACCESS_REG, &temp, 1);
/* Set TPI system control */
temp = TPI_SYS_TMDS_OUTPUT | TPI_SYS_AV_NORAML | TPI_SYS_DVI_MODE;
dm_i2c_write(dev, TPI_SYS_CTRL_REG, &temp, 1);
/* Set pixel clock */
temp1 = PICOS2KHZ(videomode->pixclock) / 10;
temp = (u8)(temp1 & 0xFF);
dm_i2c_write(dev, PIXEL_CLK_LSB_REG, &temp, 1);
temp = (u8)(temp1 >> 8);
dm_i2c_write(dev, PIXEL_CLK_MSB_REG, &temp, 1);
/* Set total pixels per line */
temp1 = videomode->hsync_len + videomode->left_margin +
videomode->xres + videomode->right_margin;
temp = (u8)(temp1 & 0xFF);
dm_i2c_write(dev, TOTAL_PIXELS_LSB_REG, &temp, 1);
temp = (u8)(temp1 >> 8);
dm_i2c_write(dev, TOTAL_PIXELS_MSB_REG, &temp, 1);
/* Set total lines */
temp2 = videomode->vsync_len + videomode->upper_margin +
videomode->yres + videomode->lower_margin;
temp = (u8)(temp2 & 0xFF);
dm_i2c_write(dev, TOTAL_LINES_LSB_REG, &temp, 1);
temp = (u8)(temp2 >> 8);
dm_i2c_write(dev, TOTAL_LINES_MSB_REG, &temp, 1);
/* Set vertical frequency in Hz */
temp3 = temp1 * temp2;
temp3 = (PICOS2KHZ(videomode->pixclock) * 1000) / temp3;
temp1 = (u16)temp3 * 100;
temp = (u8)(temp1 & 0xFF);
dm_i2c_write(dev, VERT_FREQ_LSB_REG, &temp, 1);
temp = (u8)(temp1 >> 8);
dm_i2c_write(dev, VERT_FREQ_MSB_REG, &temp, 1);
/* Set TPI input bus and pixel repetition data */
temp = TPI_INBUS_CLOCK_RATIO_1 | TPI_INBUS_FULL_PIXEL_WIDE |
TPI_INBUS_RISING_EDGE;
dm_i2c_write(dev, TPI_INBUS_FMT_REG, &temp, 1);
/* Set TPI AVI Input format data */
temp = TPI_INPUT_CLR_DEPTH_8BIT | TPI_INPUT_VRANGE_EXPAN_AUTO |
TPI_INPUT_CLR_RGB;
dm_i2c_write(dev, TPI_INPUT_FMT_REG, &temp, 1);
/* Set TPI AVI Output format data */
temp = TPI_OUTPUT_CLR_DEPTH_8BIT | TPI_OUTPUT_VRANGE_COMPRE_AUTO |
TPI_OUTPUT_CLR_HDMI_RGB;
dm_i2c_write(dev, TPI_OUTPUT_FMT_REG, &temp, 1);
/* Set TPI audio configuration write data */
temp = TPI_AUDIO_PASS_BASIC;
dm_i2c_write(dev, TPI_AUDIO_HANDING_REG, &temp, 1);
temp = TPI_AUDIO_INTF_I2S | TPI_AUDIO_INTF_NORMAL |
TPI_AUDIO_TYPE_PCM;
dm_i2c_write(dev, TPI_AUDIO_INTF_REG, &temp, 1);
temp = TPI_AUDIO_SAMP_SIZE_16BIT | TPI_AUDIO_SAMP_FREQ_44K;
dm_i2c_write(dev, TPI_AUDIO_FREQ_REG, &temp, 1);
#else
i2c_set_bus_num(CONFIG_SYS_I2C_DVI_BUS_NUM);
/* Enable TPI transmitter mode */
@ -147,6 +242,7 @@ int dcu_set_dvi_encoder(struct fb_videomode *videomode)
temp = TPI_AUDIO_SAMP_SIZE_16BIT | TPI_AUDIO_SAMP_FREQ_44K;
i2c_write(CONFIG_SYS_I2C_DVI_ADDR, TPI_AUDIO_FREQ_REG, 1, &temp, 1);
#endif
return 0;
}

81
board/freescale/common/diu_ch7301.c
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
* Authors: Priyanka Jain <Priyanka.Jain@freescale.com>
* Wang Dongsheng <dongsheng.wang@freescale.com>
*
@ -51,6 +52,85 @@ int diu_set_dvi_encoder(unsigned int pixclock)
u8 temp;
temp = I2C_DVI_TEST_PATTERN_VAL;
#ifdef CONFIG_DM_I2C
struct udevice *dev;
ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_DVI_BUS_NUM,
CONFIG_SYS_I2C_DVI_ADDR,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
CONFIG_SYS_I2C_DVI_BUS_NUM);
return ret;
}
ret = dm_i2c_write(dev, I2C_DVI_TEST_PATTERN_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select proper dvi test pattern\n");
return ret;
}
temp = I2C_DVI_INPUT_DATA_FORMAT_VAL;
ret = dm_i2c_write(dev, I2C_DVI_INPUT_DATA_FORMAT_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi input data format\n");
return ret;
}
/* Set Sync polarity register */
temp = I2C_DVI_SYNC_POLARITY_VAL;
ret = dm_i2c_write(dev, I2C_DVI_SYNC_POLARITY_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi syc polarity\n");
return ret;
}
/* Set PLL registers based on pixel clock rate*/
if (pixclock > 65000000) {
temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_CHARGE_CNTL_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll charge_cntl\n");
return ret;
}
temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_DIVIDER_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll divider\n");
return ret;
}
temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_FILTER_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll filter\n");
return ret;
}
} else {
temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_CHARGE_CNTL_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll charge_cntl\n");
return ret;
}
temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_DIVIDER_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll divider\n");
return ret;
}
temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL;
ret = dm_i2c_write(dev, I2C_DVI_PLL_FILTER_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi pll filter\n");
return ret;
}
}
temp = I2C_DVI_POWER_MGMT_VAL;
ret = dm_i2c_write(dev, I2C_DVI_POWER_MGMT_REG, &temp, 1);
if (ret) {
puts("I2C: failed to select dvi power mgmt\n");
return ret;
}
#else
ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_TEST_PATTERN_REG, 1,
&temp, 1);
if (ret) {
@ -128,6 +208,7 @@ int diu_set_dvi_encoder(unsigned int pixclock)
puts("I2C: failed to select dvi power mgmt\n");
return ret;
}
#endif
udelay(500);

46
board/freescale/ls1021aqds/dcu.c
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*
* FSL DCU Framebuffer driver
*/
@ -15,11 +16,23 @@
DECLARE_GLOBAL_DATA_PTR;
static int select_i2c_ch_pca9547(u8 ch)
static int select_i2c_ch_pca9547(u8 ch, int bus_num)
{
int ret;
#ifdef CONFIG_DM_I2C
struct udevice *dev;
ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
ret = dm_i2c_write(dev, 0, &ch, 1);
#else
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
@ -51,6 +64,28 @@ int platform_dcu_init(struct fb_info *fbinfo,
u8 ch;
/* Mux I2C3+I2C4 as HSYNC+VSYNC */
#ifdef CONFIG_DM_I2C
struct udevice *dev;
/* QIXIS device mount on I2C1 bus*/
ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_QIXIS_ADDR,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
0);
return ret;
}
ret = dm_i2c_read(dev, QIXIS_DCU_BRDCFG5, &ch, 1);
if (ret) {
printf("Error: failed to read I2C @%02x\n",
CONFIG_SYS_I2C_QIXIS_ADDR);
return ret;
}
ch &= 0x1F;
ch |= 0xA0;
ret = dm_i2c_write(dev, QIXIS_DCU_BRDCFG5, &ch, 1);
#else
ret = i2c_read(CONFIG_SYS_I2C_QIXIS_ADDR, QIXIS_DCU_BRDCFG5,
1, &ch, 1);
if (ret) {
@ -62,6 +97,7 @@ int platform_dcu_init(struct fb_info *fbinfo,
ch |= 0xA0;
ret = i2c_write(CONFIG_SYS_I2C_QIXIS_ADDR, QIXIS_DCU_BRDCFG5,
1, &ch, 1);
#endif
if (ret) {
printf("Error: failed to write I2C @%02x\n",
CONFIG_SYS_I2C_QIXIS_ADDR);
@ -76,10 +112,14 @@ int platform_dcu_init(struct fb_info *fbinfo,
pixval = 1000000000 / dcu_fb_videomode->pixclock;
pixval *= 1000;
#ifndef CONFIG_DM_I2C
i2c_set_bus_num(CONFIG_SYS_I2C_DVI_BUS_NUM);
select_i2c_ch_pca9547(I2C_MUX_CH_CH7301);
#endif
select_i2c_ch_pca9547(I2C_MUX_CH_CH7301,
CONFIG_SYS_I2C_DVI_BUS_NUM);
diu_set_dvi_encoder(pixval);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT,
CONFIG_SYS_I2C_DVI_BUS_NUM);
} else {
return 0;
}

21
board/freescale/ls1021aqds/ls1021aqds.c
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*/
#include <common.h>
@ -139,11 +140,23 @@ unsigned long get_board_ddr_clk(void)
return 66666666;
}
int select_i2c_ch_pca9547(u8 ch)
int select_i2c_ch_pca9547(u8 ch, int bus_num)
{
int ret;
#ifdef CONFIG_DM_I2C
struct udevice *dev;
ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
ret = dm_i2c_write(dev, 0, &ch, 1);
#else
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
@ -158,8 +171,10 @@ int dram_init(void)
* When resuming from deep sleep, the I2C channel may not be
* in the default channel. So, switch to the default channel
* before accessing DDR SPD.
*
* PCA9547(0x77) mount on I2C1 bus
*/
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
return fsl_initdram();
}
@ -408,7 +423,7 @@ int board_init(void)
erratum_a009942_check_cpo();
#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
#ifndef CONFIG_SYS_FSL_NO_SERDES
fsl_serdes_init();

27
board/freescale/ls1021atwr/ls1021atwr.c
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*/
#include <common.h>
@ -447,14 +448,37 @@ void board_init_f(ulong dummy)
/* program the regulator (MC34VR500) to support deep sleep */
void ls1twr_program_regulator(void)
{
unsigned int i2c_bus;
u8 i2c_device_id;
#define LS1TWR_I2C_BUS_MC34VR500 1
#define MC34VR500_ADDR 0x8
#define MC34VR500_DEVICEID 0x4
#define MC34VR500_DEVICEID_MASK 0x0f
#ifdef CONFIG_DM_I2C
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(LS1TWR_I2C_BUS_MC34VR500, MC34VR500_ADDR,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
LS1TWR_I2C_BUS_MC34VR500);
return;
}
i2c_device_id = dm_i2c_reg_read(dev, 0x0) &
MC34VR500_DEVICEID_MASK;
if (i2c_device_id != MC34VR500_DEVICEID) {
printf("The regulator (MC34VR500) does not exist. The device does not support deep sleep.\n");
return;
}
dm_i2c_reg_write(dev, 0x31, 0x4);
dm_i2c_reg_write(dev, 0x4d, 0x4);
dm_i2c_reg_write(dev, 0x6d, 0x38);
dm_i2c_reg_write(dev, 0x6f, 0x37);
dm_i2c_reg_write(dev, 0x71, 0x30);
#else
unsigned int i2c_bus;
i2c_bus = i2c_get_bus_num();
i2c_set_bus_num(LS1TWR_I2C_BUS_MC34VR500);
i2c_device_id = i2c_reg_read(MC34VR500_ADDR, 0x0) &
@ -471,6 +495,7 @@ void ls1twr_program_regulator(void)
i2c_reg_write(MC34VR500_ADDR, 0x71, 0x30);
i2c_set_bus_num(i2c_bus);
#endif
}
#endif

2
configs/ls1021aiot_qspi_defconfig
View File

@ -45,3 +45,5 @@ CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aiot_sdcard_defconfig
View File

@ -51,3 +51,5 @@ CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_ddr4_nor_defconfig
View File

@ -67,3 +67,5 @@ CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_ddr4_nor_lpuart_defconfig
View File

@ -67,3 +67,5 @@ CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_nand_defconfig
View File

@ -82,3 +82,5 @@ CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_nor_SECURE_BOOT_defconfig
View File

@ -66,3 +66,5 @@ CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_nor_defconfig
View File

@ -68,3 +68,5 @@ CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_nor_lpuart_defconfig
View File

@ -68,3 +68,5 @@ CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_qspi_defconfig
View File

@ -69,3 +69,5 @@ CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_sdcard_ifc_defconfig
View File

@ -81,3 +81,5 @@ CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021aqds_sdcard_qspi_defconfig
View File

@ -81,3 +81,5 @@ CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atsn_qspi_defconfig
View File

@ -57,3 +57,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atsn_sdcard_defconfig
View File

@ -68,3 +68,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atwr_nor_SECURE_BOOT_defconfig
View File

@ -60,3 +60,5 @@ CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atwr_nor_defconfig
View File

@ -62,3 +62,5 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atwr_nor_lpuart_defconfig
View File

@ -63,3 +63,5 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atwr_qspi_defconfig
View File

@ -67,3 +67,5 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
View File

@ -74,3 +74,5 @@ CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atwr_sdcard_ifc_defconfig
View File

@ -75,3 +75,5 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

2
configs/ls1021atwr_sdcard_qspi_defconfig
View File

@ -78,3 +78,5 @@ CONFIG_USB_XHCI_DWC3=y
CONFIG_VIDEO_FSL_DCU_FB=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y

7
include/configs/ls1021aiot.h
View File

@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2016 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*/
#ifndef __CONFIG_H
@ -97,7 +98,13 @@
* I2C
*/
#define CONFIG_CMD_I2C
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
#else
#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
#endif
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */

6
include/configs/ls1021aqds.h
View File

@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*/
#ifndef __CONFIG_H
@ -331,7 +332,12 @@ unsigned long get_board_ddr_clk(void);
/*
* I2C
*/
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
#else
#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
#endif
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */

7
include/configs/ls1021atsn.h
View File

@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0
* Copyright 2016-2018 NXP Semiconductors
* Copyright 2016-2019 NXP Semiconductors
* Copyright 2019 Vladimir Oltean <olteanv@gmail.com>
*/
@ -107,7 +107,12 @@
#define CONFIG_BAUDRATE 115200
/* I2C */
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
#else
#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
#endif
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */

7
include/configs/ls1021atwr.h
View File

@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
*/
#ifndef __CONFIG_H
@ -209,7 +210,12 @@
/*
* I2C
*/
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
#else
#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
#endif
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
@ -446,6 +452,7 @@
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#undef CONFIG_DM_I2C
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif