diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 7b49ad3b490..28d574fbb80 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -26,29 +26,14 @@ config MACH_PH1_SLD8 endchoice -choice - prompt "UniPhier Support Card select" - optional - -config PFC_MICRO_SUPPORT_CARD - bool "Support card with PFC CPLD" +config MICRO_SUPPORT_CARD + bool "Use Micro Support Card" help - This option provides support for the expansion board with PFC - original address mapping. + This option provides support for the expansion board, available + on some UniPhier reference boards. Say Y to use the on-board UART, Ether, LED devices. -config DCC_MICRO_SUPPORT_CARD - bool "Support card with DCC CPLD" - help - This option provides support for the expansion board with DCC- - arranged address mapping that is compatible with legacy UniPhier - reference boards. - - Say Y to use the on-board UART, Ether, LED devices. - -endchoice - config CMD_PINMON bool "Enable boot mode pins monitor command" default y diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 103db6d7dc6..5f175575e86 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -29,8 +29,7 @@ endif obj-y += timer.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += support_card.o obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h index e3cba5befe2..c039d807f4d 100644 --- a/arch/arm/mach-uniphier/include/mach/board.h +++ b/arch/arm/mach-uniphier/include/mach/board.h @@ -1,6 +1,5 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada + * Copyright (C) 2012-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,8 +7,7 @@ #ifndef ARCH_BOARD_H #define ARCH_BOARD_H -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +#if defined(CONFIG_MICRO_SUPPORT_CARD) void support_card_reset(void); void support_card_init(void); void support_card_late_init(void); diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile index 0c198c65e77..4a2c944aeef 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c deleted file mode 100644 index 5b5958be053..00000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE3); - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ - - sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile index afd9235e9b3..a52b5aa5565 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += pll_init.o early_clkrst_init.o \ pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c deleted file mode 100644 index 877ba79f68d..00000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0400bc01, SBBASE1); /* sub memory */ - writel(0x0800bf01, SBBASE3); /* peripherals */ - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ - - sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ - writel(0x00000001, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile index aff5d640d6f..e3cb39fa50d 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/Makefile +++ b/arch/arm/mach-uniphier/ph1-sld3/Makefile @@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ early_pinctrl.o pll_spectrum.o umc_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o else obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o endif diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c deleted file mode 100644 index f5e24467ced..00000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - /* only address/data multiplex mode is supported */ - - /* XECS0 : boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02); - - /* XECS1 : sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); - - /* XECS2 : peripherals */ - writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20); - writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21); - writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE2); - - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c deleted file mode 100644 index c2267c73eeb..00000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* - * SBCTRL0* does not need settings because PH1-sLD8 has no support for - * XECS0. The boot swap must be enabled to boot from the support card. - */ - - if (boot_is_swapped()) { - /* XECS1 : boot memory if boot swap is on */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - } - - /* XECS4 : sub memory */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); - - /* XECS5 : peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0900bfff, SBBASE1); /* dummy */ - writel(0x0400bc01, SBBASE4); /* sub memory */ - writel(0x0800bf01, SBBASE5); /* peripherals */ - - sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ - sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ - - /* dummy read to assure write process */ - readl(SG_PINCTRL(0)); -} diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c index ea85b20e979..4ca6ffea2dc 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/support_card.c @@ -8,11 +8,9 @@ #include #include -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - -#define PFC_MICRO_SUPPORT_CARD_RESET \ +#define MICRO_SUPPORT_CARD_RESET \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) -#define PFC_MICRO_SUPPORT_CARD_REVISION \ +#define MICRO_SUPPORT_CARD_REVISION \ ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) /* * 0: reset deassert, 1: reset @@ -22,65 +20,22 @@ */ void support_card_reset_deassert(void) { - writel(0, PFC_MICRO_SUPPORT_CARD_RESET); + writel(0, MICRO_SUPPORT_CARD_RESET); } void support_card_reset(void) { - writel(3, PFC_MICRO_SUPPORT_CARD_RESET); + writel(3, MICRO_SUPPORT_CARD_RESET); } static int support_card_show_revision(void) { u32 revision; - revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); - printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); + revision = readl(MICRO_SUPPORT_CARD_REVISION); + printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf); return 0; } -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) - -#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) -#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) -#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) -#define DCC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) - -void support_card_reset_deassert(void) -{ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -void support_card_reset(void) -{ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); - - if (revision >= 0x67) { - printf("(DCC CPLD version 3.%d.%d)\n", - revision >> 4, revision & 0xf); - return 0; - } else { - printf("(DCC CPLD unknown version)\n"); - return -1; - } -} -#endif int check_support_card(void) { @@ -146,28 +101,11 @@ static int mem_is_flash(const struct memory_bank *mem) return ret; } -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* {address, size} */ -static const struct memory_bank memory_banks_boot_swap_off[] = { +/* {address, size} */ +static const struct memory_bank memory_banks[] = { {0x02000000, 0x01f00000}, }; -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x01f00000}, -}; -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x04000000, 0x02000000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x02000000}, - {0x04000000, 0x02000000}, -}; -#endif - static const struct memory_bank *flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; @@ -187,13 +125,8 @@ static void detect_num_flash_banks(void) cfi_flash_num_flash_banks = 0; - if (boot_is_swapped()) { - memory_bank = memory_banks_boot_swap_on; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); - } else { - memory_bank = memory_banks_boot_swap_off; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); - } + memory_bank = memory_banks; + end = memory_bank + ARRAY_SIZE(memory_banks); for (; memory_bank < end; memory_bank++) { if (cfi_flash_num_flash_banks >= diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 13b124b661e..e9744a3483b 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_MACH_PH1_LD4=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref" CONFIG_HUSH_PARSER=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index 0982d9141a3..1b3092dbe74 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref" CONFIG_HUSH_PARSER=y diff --git a/configs/ph1_sld3_defconfig b/configs/ph1_sld3_defconfig index d49513251e3..df908e260b5 100644 --- a/configs/ph1_sld3_defconfig +++ b/configs/ph1_sld3_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y CONFIG_MACH_PH1_SLD3=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref" CONFIG_HUSH_PARSER=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 584c41ab9f6..81515628578 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_MACH_PH1_SLD8=y -CONFIG_PFC_MICRO_SUPPORT_CARD=y +CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref" CONFIG_HUSH_PARSER=y diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index d59564bafd0..7316046952e 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -62,19 +62,10 @@ /* * Support card address map */ -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) -# define CONFIG_SUPPORT_CARD_BASE 0x03f00000 -# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) -# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) -# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000) -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -# define CONFIG_SUPPORT_CARD_BASE 0x08000000 -# define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) -# define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00401630) -# define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00200000) -#endif +#define CONFIG_SUPPORT_CARD_BASE 0x03f00000 +#define CONFIG_SUPPORT_CARD_ETHER_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00000000) +#define CONFIG_SUPPORT_CARD_LED_BASE (CONFIG_SUPPORT_CARD_BASE + 0x00090000) +#define CONFIG_SUPPORT_CARD_UART_BASE (CONFIG_SUPPORT_CARD_BASE + 0x000b0000) #ifdef CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550 @@ -140,7 +131,7 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 /* serial console configuration */ #define CONFIG_BAUDRATE 115200