configs: imx8mn_bsh_smm_s2: add NAND driver

It allows to boot from NAND.

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
This commit is contained in:
Dario Binacchi 2022-06-26 12:05:15 +02:00 committed by Tom Rini
parent 7f7fb9937c
commit 93899d0746

View File

@ -30,8 +30,10 @@ CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_DMA=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_PROMPT="> "
@ -65,6 +67,9 @@ CONFIG_SYS_NAND_USE_FLASH_BBT=y
CONFIG_NAND_MXS=y
CONFIG_NAND_MXS_DT=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0xD8000
CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x4058000
CONFIG_PHYLIB=y
CONFIG_PHY_NXP_TJA11XX=y
CONFIG_DM_ETH=y