mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-28 07:03:31 +08:00
arm64: zynqmp: Add System Controller for a2197-g/p
Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
This commit is contained in:
Michal Simek
parent
be972b2bd1
commit
917c57845a
@ -248,6 +248,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
|
||||
avnet-ultra96-rev1.dtb \
|
||||
avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \
|
||||
zynqmp-a2197-revA.dtb \
|
||||
zynqmp-a2197-g-revA.dtb \
|
||||
zynqmp-a2197-p-revA.dtb \
|
||||
zynqmp-mini.dtb \
|
||||
zynqmp-mini-emmc0.dtb \
|
||||
zynqmp-mini-emmc1.dtb \
|
||||
|
||||
282
arch/arm/dts/zynqmp-a2197-g-revA.dts
Normal file
282
arch/arm/dts/zynqmp-a2197-g-revA.dts
Normal file
@ -0,0 +1,282 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* dts file for Xilinx Versal a2197 RevA System Controller on MGT
|
||||
*
|
||||
* (C) Copyright 2019, Xilinx, Inc.
|
||||
*
|
||||
* Michal Simek <michal.simek@xilinx.com>
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "zynqmp.dtsi"
|
||||
#include "zynqmp-clk-ccf.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Versal System Controller on a2197 MGT Char board RevA";
|
||||
compatible = "xlnx,zynqmp-a2197-g-revA", "xlnx,zynqmp-a2197-revA",
|
||||
"xlnx,zynqmp-a2197", "xlnx,zynqmp";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gem0;
|
||||
gpio0 = &gpio;
|
||||
i2c0 = &i2c0;
|
||||
mmc0 = &sdhci0;
|
||||
rtc0 = &rtc;
|
||||
serial0 = &uart0;
|
||||
serial1 = &dcc;
|
||||
usb0 = &usb0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon";
|
||||
stdout-path = "serial0:115200n8";
|
||||
xlnx,eeprom = <&eeprom>;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 { /* emmc MIO 13-23 16GB */
|
||||
status = "okay";
|
||||
non-removable;
|
||||
disable-wp;
|
||||
bus-width = <8>;
|
||||
xlnx,mio_bank = <0>;
|
||||
};
|
||||
|
||||
&uart0 { /* uart0 MIO38-39 */
|
||||
status = "okay";
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&gem0 { /* eth MDIO 76/77 */
|
||||
status = "okay";
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "sgmii";
|
||||
is-internal-pcspma;
|
||||
phy0: phy@0 { /* marwell m88e1512 */
|
||||
reg = <0>;
|
||||
reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
/* xlnx,phy-type = <PHY_TYPE_SGMII>; */
|
||||
};
|
||||
/* phy-names = "...";
|
||||
phys = <&lane0 PHY_TYPE_SGMII ... >
|
||||
Note: lane0 sgmii/lane1 usb3 */
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
gpio-line-names = "", "", "", "", "", /* 0 - 4 */
|
||||
"", "", "", "", "", /* 5 - 9 */
|
||||
"", "", "", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
|
||||
"EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
|
||||
"EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
|
||||
"", "", "", "", "", /* 25 - 29 */
|
||||
"", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
|
||||
"LP_I2C0_PMC_SDA", "", "", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
|
||||
"", "", "ETH_RESET_B", "", "", /* 40 - 44 */
|
||||
"", "", "", "", "", /* 45 - 49 */
|
||||
"", "", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
|
||||
"USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
|
||||
"USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */
|
||||
"", "", "", "", "", /* 65 - 69 */
|
||||
"", "", "", "", "", /* 70 - 74 */
|
||||
"", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
|
||||
"SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
|
||||
"SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */
|
||||
"SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */
|
||||
"SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
|
||||
"SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */
|
||||
"VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */
|
||||
"SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */
|
||||
"SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */
|
||||
"SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */
|
||||
"SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */
|
||||
"SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */
|
||||
"PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */
|
||||
"TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */
|
||||
"PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */
|
||||
"MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */
|
||||
"", "", "", "", "", /* 150 - 154 */
|
||||
"", "", "", "", "", /* 155 - 159 */
|
||||
"", "", "", "", "", /* 160 - 164 */
|
||||
"", "", "", "", "", /* 165 - 169 */
|
||||
"", "", "", ""; /* 170 - 174 */
|
||||
};
|
||||
|
||||
&i2c0 { /* MIO 34-35 - can't stay here */
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
scl-gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
|
||||
sda-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
|
||||
i2c-mux@74 { /* u94 */
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
/* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */
|
||||
i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/* Use for storing information about SC board */
|
||||
eeprom: eeprom@50 { /* u96 - 24LC32A - 256B */
|
||||
compatible = "atmel,24c32";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
i2c@1 { /* CM_I2C_SCL - Samtec */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
i2c@2 { /* PMBUS - AFX_PMBUS */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
tps544@d { /* u85 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0xd>;
|
||||
};
|
||||
tps544@10 { /* u73 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x10>;
|
||||
};
|
||||
tps544@11 { /* u76 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x11>;
|
||||
};
|
||||
tps544@12 { /* u77 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x12>;
|
||||
};
|
||||
tps544@13 { /* u80 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x13>;
|
||||
};
|
||||
tps544@14 { /* u81 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x14>;
|
||||
};
|
||||
tps544@15 { /* u83 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x15>;
|
||||
};
|
||||
tps544@16 { /* u63 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x16>;
|
||||
};
|
||||
tps544@17 { /* u66 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x17>;
|
||||
};
|
||||
tps544@18 { /* u67 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x18>;
|
||||
};
|
||||
tps544@19 { /* u69 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x19>;
|
||||
};
|
||||
tps544@1d { /* u88 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x1d>;
|
||||
};
|
||||
tps544@1e { /* u89 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x1e>;
|
||||
};
|
||||
tps544@1f { /* u87 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x1f>;
|
||||
};
|
||||
tps544@20 { /* u71 */
|
||||
compatible = "ti,tps544b25";
|
||||
reg = <0x20>;
|
||||
};
|
||||
ina226@40 { /* u74 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
ina226@41 { /* u75 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
ina226@42 { /* u78 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x42>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
ina226@43 { /* u79 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x43>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
ina226@44 { /* u82 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x44>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
ina226@45 { /* u84 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x45>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
tps53681@c0 { /* u53 - FIXME name - don't know what it does - also vcc_io_soc */
|
||||
compatible = "ti,tps53681"; /* FIXME no linux driver */
|
||||
reg = <0xc0>;
|
||||
};
|
||||
};
|
||||
i2c@3 { /* fmc1 via JA2G */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
eeprom_fmc1: eeprom@50 { /* on FMC */
|
||||
compatible = "atmel,24c04";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
i2c@4 { /* fmc2 via JA3G */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
eeprom_fmc2: eeprom@50 { /* on FMC */
|
||||
compatible = "atmel,24c04";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
i2c@5 { /* fmc3 via JA4G */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
eeprom_fmc3: eeprom@50 { /* on FMC */
|
||||
compatible = "atmel,24c04";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
i2c@6 { /* ddr dimm */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
/* 7 unused */
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 { /* USB0 MIO52-63 */
|
||||
status = "okay";
|
||||
xlnx,usb-polarity = <0>;
|
||||
xlnx,usb-reset-mode = <0>;
|
||||
};
|
||||
|
||||
&dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
maximum-speed = "high-speed";
|
||||
};
|
||||
567
arch/arm/dts/zynqmp-a2197-p-revA.dts
Normal file
567
arch/arm/dts/zynqmp-a2197-p-revA.dts
Normal file
@ -0,0 +1,567 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* dts file for Xilinx Versal a2197 RevA System Controller
|
||||
*
|
||||
* (C) Copyright 2019, Xilinx, Inc.
|
||||
*
|
||||
* Michal Simek <michal.simek@xilinx.com>
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "zynqmp.dtsi"
|
||||
#include "zynqmp-clk-ccf.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Versal System Controller on a2197 Processor Char board RevA"; /* Tenzing */
|
||||
compatible = "xlnx,zynqmp-a2197-p-revA", "xlnx,zynqmp-a2197-revA",
|
||||
"xlnx,zynqmp-a2197", "xlnx,zynqmp";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gem0;
|
||||
gpio0 = &gpio;
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
mmc0 = &sdhci0;
|
||||
mmc1 = &sdhci1;
|
||||
rtc0 = &rtc;
|
||||
serial0 = &uart0;
|
||||
serial1 = &uart1;
|
||||
serial2 = &dcc;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon";
|
||||
stdout-path = "serial0:115200n8";
|
||||
xlnx,eeprom = <&eeprom>;
|
||||
/* xlnx,fmc-eeprom = FIXME */
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */
|
||||
status = "okay";
|
||||
non-removable;
|
||||
disable-wp;
|
||||
bus-width = <8>;
|
||||
xlnx,mio_bank = <0>;
|
||||
};
|
||||
|
||||
&uart0 { /* uart0 MIO38-39 */
|
||||
status = "okay";
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&uart1 { /* uart1 MIO40-41 */
|
||||
status = "okay";
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&sdhci1 { /* sd1 MIO45-51 cd in place */
|
||||
status = "okay";
|
||||
no-1-8-v;
|
||||
disable-wp;
|
||||
xlnx,mio_bank = <1>;
|
||||
};
|
||||
|
||||
&gem0 {
|
||||
status = "okay";
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "sgmii"; /* DTG generates this properly 1512 */
|
||||
is-internal-pcspma;
|
||||
/* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
|
||||
phy0: phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
gpio-line-names = "", "", "", "", "", /* 0 - 4 */
|
||||
"", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */
|
||||
"DC_SYS_CTRL3", "DC_SYS_CTRL4", "DC_SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
|
||||
"EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
|
||||
"EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
|
||||
"", "", "", "", "", /* 25 - 29 */
|
||||
"", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
|
||||
"LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
|
||||
"UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */
|
||||
"SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
|
||||
"SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
|
||||
"USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
|
||||
"USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */
|
||||
"USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
|
||||
"USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
|
||||
"USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
|
||||
"SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
|
||||
"SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */
|
||||
"SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */
|
||||
"SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
|
||||
"SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */
|
||||
"VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */
|
||||
"SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */
|
||||
"SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */
|
||||
"SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */
|
||||
"SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */
|
||||
"SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */
|
||||
"PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */
|
||||
"TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */
|
||||
"PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */
|
||||
"MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */
|
||||
"", "", "", "", "", /* 150 - 154 */
|
||||
"", "", "", "", "", /* 155 - 159 */
|
||||
"", "", "", "", "", /* 160 - 164 */
|
||||
"", "", "", "", "", /* 165 - 169 */
|
||||
"", "", "", ""; /* 170 - 174 */
|
||||
};
|
||||
|
||||
&i2c0 { /* MIO 34-35 - can't stay here */
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
i2c-mux@74 { /* u33 */
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
/* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
|
||||
i2c@0 { /* PMBUS1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/* On connector J98 */
|
||||
reg_vcc_fmc: tps544@7 { /* u80 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x7>;
|
||||
regulator-name = "reg_vcc_fmc";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2600000>;
|
||||
/* enable-gpio = <&gpio0 23 0x4>; optional */
|
||||
};
|
||||
reg_vcc_ram: tps544@8 { /* u83 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x8>;
|
||||
};
|
||||
reg_vcc_pslp: tps544@9 { /* u85 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x9>;
|
||||
};
|
||||
reg_vcc_psfp: tps544@a { /* u86 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0xa>;
|
||||
};
|
||||
reg_vccint: tps53681@c0 { /* u70 - FIXME name - don't know what it does - also vcc_io_soc */
|
||||
compatible = "ti,tps53681"; /* FIXME no linux driver */
|
||||
reg = <0xc0>;
|
||||
/* vccint, vcc_io_soc */
|
||||
};
|
||||
};
|
||||
i2c@1 { /* PMBUS1_INA226 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
/* FIXME check alerts comming to SC */
|
||||
vcc_fmc: ina226@42 { /* u81 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x42>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcc_ram: ina226@43 { /* u82 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x43>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcc_pslp: ina226@44 { /* u84 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x44>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcc_psfp: ina226@45 { /* u87 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x45>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
};
|
||||
i2c@2 { /* PMBUS2 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
/* On connector J104 */
|
||||
reg_vccaus: tps544@d { /* u88 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0xd>;
|
||||
};
|
||||
reg_vccaux_fmc: tps544@e { /* u90 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0xe>;
|
||||
};
|
||||
reg_vcco_500: tps544@f { /* u93 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0xf>;
|
||||
};
|
||||
reg_vcco_501: tps544@10 { /* u95 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x10>;
|
||||
};
|
||||
reg_vcco_502: tps544@11 { /* u97 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x11>;
|
||||
};
|
||||
reg_vcco_503: tps544@12 { /* u99 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x12>;
|
||||
};
|
||||
reg_vcc1v8: tps544@13 { /* u101 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x13>;
|
||||
};
|
||||
reg_vcc3v3: tps544@14 { /* u102 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x14>;
|
||||
};
|
||||
reg_vcc1v2_ddr4: tps544@15 { /* u104 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x15>;
|
||||
};
|
||||
reg_vcc1v1_lp4: tps544@16 { /* u106 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x16>;
|
||||
};
|
||||
reg_vcc1_1V8_lp4: tps544@17 { /* u108 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x17>;
|
||||
};
|
||||
reg_vadj_fmc: tps544@19 { /* u109 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x19>;
|
||||
};
|
||||
reg_mgtyavcc: tps544@1a { /* u111 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x1a>;
|
||||
};
|
||||
reg_mgtyavtt: tps544@1b { /* u114 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x1b>;
|
||||
};
|
||||
reg_mgtyvccaux: tps544@1c { /* u115 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x1c>;
|
||||
};
|
||||
reg_util_1v13: tps544@1d { /* u117 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x1d>;
|
||||
};
|
||||
reg_util_1v8: tps544@1e { /* u118 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x1e>;
|
||||
};
|
||||
reg_util_2v5: tps544@1f { /* u119 - FIXME name - don't know what it does */
|
||||
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
|
||||
reg = <0x1f>;
|
||||
};
|
||||
};
|
||||
i2c@3 { /* PMBUS2_INA226 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
/* FIXME check alerts coming to SC */
|
||||
vccaux: ina226@40 { /* u89 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vccaux_fmc: ina226@41 { /* u91 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcco_500: ina226@42 { /* u92 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x42>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcco_501: ina226@43 { /* u94 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x43>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcco_502: ina226@44 { /* u96 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x44>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcco_503: ina226@45 { /* u98 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x45>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcc_1v8: ina226@46 { /* u100 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x46>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcc_3v3: ina226@47 { /* u103 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x47>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcc_1v2_ddr4: ina226@48 { /* u105 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x48>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
vcc1v1_lp4: ina226@49 { /* u107 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x49>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vadj_fmc: ina226@4a { /* u110 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x4a>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
mgtyavcc: ina226@4b { /* u112 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x4b>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
mgtyavtt: ina226@4c { /* u113 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x4c>;
|
||||
shunt-resistor = <1000>;
|
||||
};
|
||||
mgtyvccaux: ina226@4d { /* u116 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x4d>;
|
||||
shunt-resistor = <5000>;
|
||||
};
|
||||
vcc_bat: ina226@4e { /* u12 */
|
||||
compatible = "ti,ina226";
|
||||
reg = <0x4e>;
|
||||
shunt-resistor = <10000000>; /* 10 ohm */
|
||||
};
|
||||
};
|
||||
i2c@4 { /* LP_I2C_SM */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
/* connected to J212G */
|
||||
/* zynqmp sm alert or samtec J212H */
|
||||
};
|
||||
/* 5-7 unused */
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 { /* i2c1 MIO 36-37 */
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
/* Must be enabled via J242 */
|
||||
eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x51>;
|
||||
};
|
||||
|
||||
i2c-mux@74 { /* u35 */
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
/* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
|
||||
dc_i2c: i2c@0 { /* DC_I2C */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/* Use for storing information about SC board */
|
||||
eeprom: eeprom@54 { /* u34 - m24128 16kB */
|
||||
compatible = "st,24c128", "atmel,24c128";
|
||||
reg = <0x54>;
|
||||
};
|
||||
si570_ref_clk: clock-generator@5d { /* u32 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5d>; /* 570JAC000900DG */
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <156250000>; /* FIXME every chip can be different */
|
||||
clock-frequency = <33333333>;
|
||||
clock-output-names = "REF_CLK"; /* FIXME */
|
||||
};
|
||||
/* Connection via Samtec J212D */
|
||||
/* Use for storing information about X-PRC card */
|
||||
x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */
|
||||
compatible = "atmel,24c02";
|
||||
reg = <0x52>;
|
||||
};
|
||||
|
||||
/* Use for setting up certain features on X-PRC card */
|
||||
x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */
|
||||
compatible = "nxp,pca9534";
|
||||
reg = <0x22>;
|
||||
gpio-controller; /* IRQ not connected */
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
|
||||
"", "", "", "";
|
||||
gtr_sel0 {
|
||||
gpio-hog;
|
||||
gpios = <0 0>;
|
||||
input; /* FIXME add meaning */
|
||||
line-name = "sw4_1";
|
||||
};
|
||||
gtr_sel1 {
|
||||
gpio-hog;
|
||||
gpios = <1 0>;
|
||||
input; /* FIXME add meaning */
|
||||
line-name = "sw4_2";
|
||||
};
|
||||
gtr_sel2 {
|
||||
gpio-hog;
|
||||
gpios = <2 0>;
|
||||
input; /* FIXME add meaning */
|
||||
line-name = "sw4_3";
|
||||
};
|
||||
gtr_sel3 {
|
||||
gpio-hog;
|
||||
gpios = <3 0>;
|
||||
input; /* FIXME add meaning */
|
||||
line-name = "sw4_4";
|
||||
};
|
||||
};
|
||||
};
|
||||
i2c@1 { /* FMCP1_IIC */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
/* FIXME connection to Samtec J51C */
|
||||
/* expected eeprom 0x50 SE cards */
|
||||
};
|
||||
i2c@2 { /* FMCP2_IIC */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
/* FIXME connection to Samtec J53C */
|
||||
/* expected eeprom 0x50 SE cards */
|
||||
};
|
||||
i2c@3 { /* DDR4_DIMM1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
si570_ddr_dimm1: clock-generator@60 { /* u2 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x60>; /* 570BAB000299DG */
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */
|
||||
clock-frequency = <33333333>;
|
||||
clock-output-names = "REF_CLK"; /* FIXME */
|
||||
};
|
||||
/* 0x50 SPD? */
|
||||
};
|
||||
i2c@4 { /* DDR4_DIMM2 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
si570_ddr_dimm2: clock-generator@60 { /* u3 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x60>; /* 570BAB000299DG */
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */
|
||||
clock-frequency = <33333333>;
|
||||
clock-output-names = "REF_CLK"; /* FIXME */
|
||||
};
|
||||
/* 0x50 SPD? */
|
||||
};
|
||||
i2c@5 { /* LPDDR4_SI570_CLK */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
si570_lpddr4: clock-generator@60 { /* u4 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x60>; /* 570BAB000299DG */
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */
|
||||
clock-frequency = <33333333>;
|
||||
clock-output-names = "LPDDR4_SI570_CLK";
|
||||
};
|
||||
};
|
||||
i2c@6 { /* HSDP_SI570 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
si570_hsdp: clock-generator@5d { /* u5 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5d>; /* 570JAC000900DG */
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */
|
||||
clock-frequency = <33333333>;
|
||||
clock-output-names = "HSDP_SI570";
|
||||
};
|
||||
};
|
||||
i2c@7 { /* PCIE_CLK */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
/* u36 0xd8 or 0xde - pcie clk buf - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */
|
||||
/* u37 0xd0 DNP - pcie clocking 1 - 9FGV1006BQ505LTGI - PCIe GEN 4 CLOCK GENERATOR FIXME - no linux driver */
|
||||
/* u38 0xca - pcie clocking 2 - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */
|
||||
clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 - pcie clocking 3 */
|
||||
#clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/
|
||||
compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */
|
||||
reg = <0xd8>;
|
||||
/* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */
|
||||
/* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
xlnx,usb-polarity = <0>;
|
||||
xlnx,usb-reset-mode = <0>;
|
||||
};
|
||||
|
||||
&dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
snps,dis_u2_susphy_quirk;
|
||||
snps,dis_u3_susphy_quirk;
|
||||
maximum-speed = "super-speed";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
xlnx,usb-polarity = <0>;
|
||||
xlnx,usb-reset-mode = <0>;
|
||||
};
|
||||
|
||||
&dwc3_1 {
|
||||
/delete-property/ phy-names ;
|
||||
/delete-property/ phys ;
|
||||
dr_mode = "host";
|
||||
maximum-speed = "high-speed";
|
||||
snps,dis_u2_susphy_quirk ;
|
||||
snps,dis_u3_susphy_quirk ;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xilinx_ams {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ams_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ams_pl {
|
||||
status = "okay";
|
||||
};
|
||||
1
board/xilinx/zynqmp/zynqmp-a2197-g-revA
Symbolic link
1
board/xilinx/zynqmp/zynqmp-a2197-g-revA
Symbolic link
@ -0,0 +1 @@
|
||||
zynqmp-a2197-revA
|
||||
1
board/xilinx/zynqmp/zynqmp-a2197-p-revA
Symbolic link
1
board/xilinx/zynqmp/zynqmp-a2197-p-revA
Symbolic link
@ -0,0 +1 @@
|
||||
zynqmp-a2197-revA
|
||||
116
configs/xilinx_zynqmp_a2197_g_revA_defconfig
Normal file
116
configs/xilinx_zynqmp_a2197_g_revA_defconfig
Normal file
@ -0,0 +1,116 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_ZYNQMP=y
|
||||
CONFIG_SYS_TEXT_BASE=0x8000000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_SPL=y
|
||||
CONFIG_DEBUG_UART_BASE=0xff000000
|
||||
CONFIG_DEBUG_UART_CLOCK=100000000
|
||||
CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI_SUPPORT=y
|
||||
CONFIG_ZYNQMP_USB=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_BOARD_EARLY_INIT_R=y
|
||||
CONFIG_SPL_OS_BOOT=y
|
||||
CONFIG_SPL_RAM_SUPPORT=y
|
||||
CONFIG_SPL_RAM_DEVICE=y
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_SYS_PROMPT="ZynqMP> "
|
||||
CONFIG_CMD_THOR_DOWNLOAD=y
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
CONFIG_SYS_ALT_MEMTEST=y
|
||||
CONFIG_CMD_CLK=y
|
||||
CONFIG_CMD_DFU=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_FPGA_LOADBP=y
|
||||
CONFIG_CMD_FPGA_LOADP=y
|
||||
CONFIG_CMD_FPGA_LOAD_SECURE=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_SDRAM=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_TIMER=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-g-revA"
|
||||
CONFIG_ENV_IS_IN_FAT=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_SCSI_AHCI=y
|
||||
CONFIG_SATA_CEVA=y
|
||||
CONFIG_CLK_ZYNQMP=y
|
||||
CONFIG_DFU_RAM=y
|
||||
CONFIG_USB_FUNCTION_FASTBOOT=y
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_FPGA_XILINX=y
|
||||
CONFIG_FPGA_ZYNQMPPL=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_XILINX_GPIO=y
|
||||
CONFIG_DM_PCA953X=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_CADENCE=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_I2C_EEPROM=y
|
||||
CONFIG_SYS_I2C_EEPROM_ADDR=0x0
|
||||
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ZYNQ=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_BAR=y
|
||||
CONFIG_SF_DUAL_FLASH=y
|
||||
CONFIG_SPI_FLASH_ISSI=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_PHY_MARVELL=y
|
||||
CONFIG_PHY_NATSEMI=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_PHY_TI=y
|
||||
CONFIG_PHY_VITESSE=y
|
||||
CONFIG_PHY_FIXED=y
|
||||
CONFIG_PHY_GIGE=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_ZYNQ_GEM=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_DM_SCSI=y
|
||||
CONFIG_DEBUG_UART_ZYNQ=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_ZYNQ_SERIAL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_ZYNQMP_GQSPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_XHCI_ZYNQMP=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GADGET=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_USB_ULPI_VIEWPORT=y
|
||||
CONFIG_USB_ULPI=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
|
||||
CONFIG_USB_FUNCTION_THOR=y
|
||||
CONFIG_SPL_GZIP=y
|
||||
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
|
||||
117
configs/xilinx_zynqmp_a2197_p_revA_defconfig
Normal file
117
configs/xilinx_zynqmp_a2197_p_revA_defconfig
Normal file
@ -0,0 +1,117 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_ZYNQMP=y
|
||||
CONFIG_SYS_TEXT_BASE=0x8000000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_SPL=y
|
||||
CONFIG_DEBUG_UART_BASE=0xff000000
|
||||
CONFIG_DEBUG_UART_CLOCK=100000000
|
||||
CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI_SUPPORT=y
|
||||
CONFIG_ZYNQMP_USB=y
|
||||
CONFIG_SPL_ZYNQMP_TWO_SDHCI=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_BOARD_EARLY_INIT_R=y
|
||||
CONFIG_SPL_OS_BOOT=y
|
||||
CONFIG_SPL_RAM_SUPPORT=y
|
||||
CONFIG_SPL_RAM_DEVICE=y
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_SYS_PROMPT="ZynqMP> "
|
||||
CONFIG_CMD_THOR_DOWNLOAD=y
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
CONFIG_SYS_ALT_MEMTEST=y
|
||||
CONFIG_CMD_CLK=y
|
||||
CONFIG_CMD_DFU=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_FPGA_LOADBP=y
|
||||
CONFIG_CMD_FPGA_LOADP=y
|
||||
CONFIG_CMD_FPGA_LOAD_SECURE=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_SDRAM=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_TIMER=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-p-revA"
|
||||
CONFIG_ENV_IS_IN_FAT=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_SCSI_AHCI=y
|
||||
CONFIG_SATA_CEVA=y
|
||||
CONFIG_CLK_ZYNQMP=y
|
||||
CONFIG_DFU_RAM=y
|
||||
CONFIG_USB_FUNCTION_FASTBOOT=y
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_FPGA_XILINX=y
|
||||
CONFIG_FPGA_ZYNQMPPL=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_XILINX_GPIO=y
|
||||
CONFIG_DM_PCA953X=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_CADENCE=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_I2C_EEPROM=y
|
||||
CONFIG_SYS_I2C_EEPROM_ADDR=0x0
|
||||
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ZYNQ=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_BAR=y
|
||||
CONFIG_SF_DUAL_FLASH=y
|
||||
CONFIG_SPI_FLASH_ISSI=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_PHY_MARVELL=y
|
||||
CONFIG_PHY_NATSEMI=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_PHY_TI=y
|
||||
CONFIG_PHY_VITESSE=y
|
||||
CONFIG_PHY_FIXED=y
|
||||
CONFIG_PHY_GIGE=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_ZYNQ_GEM=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_DM_SCSI=y
|
||||
CONFIG_DEBUG_UART_ZYNQ=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_ZYNQ_SERIAL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_ZYNQMP_GQSPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_XHCI_ZYNQMP=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GADGET=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_USB_ULPI_VIEWPORT=y
|
||||
CONFIG_USB_ULPI=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
|
||||
CONFIG_USB_FUNCTION_THOR=y
|
||||
CONFIG_SPL_GZIP=y
|
||||
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
|
||||
@ -44,6 +44,7 @@ CONFIG_CMD_TIMER=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA"
|
||||
CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-a2197-g-revA zynqmp-a2197-p-revA"
|
||||
CONFIG_ENV_IS_IN_FAT=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_SPL_DM=y
|
||||
|
||||
Loading…
Reference in New Issue
Block a user