mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-05 02:23:31 +08:00
Code Issues Packages Projects Releases Wiki Activity

board: qcs404-evb: drop board code

Browse Source 
This board is entirely supported by the generic arch code and DTS. The
board code used to handle turning on the vbus regulator, however this is
now handled via DT.

With this, the board specific defconfig is also no longer needed, so
drop it as well.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
This commit is contained in:
Caleb Connolly 2024-02-26 17:26:28 +00:00
parent c6f4985a04
commit 90744c1a14
No known key found for this signature in database
GPG Key ID: 7930459FB9303217
3 changed files with 0 additions and 111 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
board/qualcomm/qcs404-evb/Makefile
View File

@ -1,6 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
#
obj-y += qcs404-evb.o

49
board/qualcomm/qcs404-evb/qcs404-evb.c
View File

@ -1,49 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Board init file for QCS404-EVB
*
* (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
*/
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
#include <env.h>
#include <init.h>
#include <asm/cache.h>
#include <asm/gpio.h>
#include <asm/global_data.h>
#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
void qcom_board_init(void)
{
struct udevice *pmic_gpio;
struct gpio_desc usb_vbus_boost_pin;
int ret, node;
ret = uclass_get_device_by_name(UCLASS_GPIO,
"pms405_gpios@c000",
&pmic_gpio);
if (ret < 0) {
printf("Failed to find pms405_gpios@c000 node.\n");
return;
}
node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pmic_gpio),
"usb_vbus_boost_pin");
if (node < 0) {
printf("Failed to find usb_hub_reset_pm dt node.\n");
return;
}
ret = gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0,
&usb_vbus_boost_pin, 0);
if (ret < 0) {
printf("Failed to request usb_hub_reset_pm gpio.\n");
return;
}
dm_gpio_set_dir_flags(&usb_vbus_boost_pin,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
}

56
configs/qcs404evb_defconfig
View File

@ -1,56 +0,0 @@
CONFIG_ARM=y
CONFIG_SYS_BOARD="qcs404-evb"
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=19000000
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_SNAPDRAGON=y
CONFIG_DEFAULT_DEVICE_TREE="qcs404-evb"
CONFIG_IDENT_STRING="\nQualcomm QCS404-EVB"
CONFIG_SYS_LOAD_ADDR=0x80000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="earlycon ignore_loglevel root= clk_ignore_unused"
CONFIG_SAVE_PREV_BL_FDT_ADDR=y
CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
CONFIG_SYS_CBSIZE=512
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=64
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_USB=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
# CONFIG_NET is not set
CONFIG_CLK=y
CONFIG_CLK_QCOM_QCS404=y
CONFIG_MSM_GPIO=y
CONFIG_QCOM_PMIC_GPIO=y
CONFIG_MISC=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ADMA=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_PHY=y
CONFIG_PHY_QCOM_USB_HS_28NM=y
CONFIG_PHY_QCOM_USB_SS=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_QCOM_QCS404=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_QCOM=y
CONFIG_MSM_SERIAL=y
CONFIG_SPMI_MSM=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_LMB_MAX_REGIONS=64