mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-25 13:14:19 +08:00
Code Issues Packages Projects Releases Wiki Activity

ARM: AM43xx: Add support for RTC only + DDR in self-refresh mode

Browse Source 
Kernel stores information to the RTC_SCRATCH0 and RTC_SCRATCH1 registers
for wakeup from RTC-only mode with DDR in self-refresh. Parse these
registers during SPL boot and jump to the kernel resume vector if the
device is waking up from RTC-only modewith DDR in Self-refresh.

The RTC scratch register layout used is:

SCRATCH0 : bits00-31 : kernel resume address
SCRATCH1 : bits00-15 : RTC magic value used to detect valid config
SCRATCH1 : bits16-31 : board type information populated by bootloader

During the normal boot path the SCRATCH1 : bits16-31 are updated with
the eeprom read board type data. In the rtc_only boot path the rtc
scratchpad register is read and the board type is determined and
correspondingly ddr dpll parameters are set. This is done so as to avoid
costly i2c read to eeprom.

RTC-only +DRR in self-refresh mode support is currently only enabled for
am43xx_evm_rtconly_config.
This is not to be used with epos evm builds.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
[j-keerthy@ti.com Rebased to latest u-boot master branch]
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tero Kristo 2018-03-17 13:32:52 +05:30 committed by Tom Rini
parent 3f151eb6cf
commit 7619badb9c
8 changed files with 269 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm/include/asm/arch-am33xx/clock.h
View File

@ -122,6 +122,12 @@ void scale_vcores(void);
void do_setup_dpll(const struct dpll_regs *, const struct dpll_params *);
void prcm_init(void);
void enable_basic_clocks(void);
void rtc_only_update_board_type(u32 btype);
u32 rtc_only_get_board_type(void);
void rtc_only_prcm_init(void);
void rtc_only_enable_basic_clocks(void);
void do_enable_clocks(u32 *const *, u32 *const *, u8);
void do_disable_clocks(u32 *const *, u32 *const *, u8);

14
arch/arm/mach-omap2/am33xx/Kconfig
View File

@ -239,6 +239,20 @@ config TARGET_CM_T43
endchoice
config SPL_RTC_DDR_SUPPORT
bool
depends on SPL
prompt "Enable RTC-DDR ONLY Support"
help
If you want RTC-DDR ONLY Support, say Y. RTC Only with DDR in
self-refresh mode is a special power saving mode where in all
the other voltages are turned off apart from the RTC domain and DDR.
So only RTC is alive and ticking and one can program it to wake
up after a predetermined period. Once RTC alarm fires, the PMIC
powers up all the voltage domains. U-Boot takes a special path
as the DDR has contents is in self-refresh and restore path is
followed.
endif
if AM43XX || AM33XX

110
arch/arm/mach-omap2/am33xx/board.c
View File

@ -147,6 +147,16 @@ int cpu_mmc_init(bd_t *bis)
}
#endif
/*
* RTC only with DDR in self-refresh mode magic value, checked against during
* boot to see if we have a valid config. This should be in sync with the value
* that will be in drivers/soc/ti/pm33xx.c.
*/
#define RTC_MAGIC_VAL 0x8cd0
/* Board type field bit shift for RTC only with DDR in self-refresh mode */
#define RTC_BOARD_TYPE_SHIFT 16
/* AM33XX has two MUSB controllers which can be host or gadget */
#if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
@ -252,6 +262,48 @@ int arch_misc_init(void)
#endif /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) || \
(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT))
static void rtc32k_unlock(struct davinci_rtc *rtc)
{
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(RTC_KICK0R_WE, &rtc->kick0r);
writel(RTC_KICK1R_WE, &rtc->kick1r);
}
#endif
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
/*
* Write contents of the RTC_SCRATCH1 register based on board type
* Two things are passed
* on. First 16 bits (0:15) are written with RTC_MAGIC value. Once the
* control gets to kernel, kernel reads the scratchpad register and gets to
* know that bootloader has rtc_only support.
*
* Second important thing is the board type (16:31). This is needed in the
* rtc_only boot where in we want to avoid costly i2c reads to eeprom to
* identify the board type and we go ahead and copy the board strings to
* am43xx_board_name.
*/
void update_rtc_magic(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
u32 magic = RTC_MAGIC_VAL;
magic |= (rtc_only_get_board_type() << RTC_BOARD_TYPE_SHIFT);
rtc32k_unlock(rtc);
/* write magic */
writel(magic, &rtc->scratch1);
}
#endif
/*
* In the case of non-SPL based booting we'll want to call these
* functions a tiny bit later as it will require gd to be set and cleared
@ -261,7 +313,9 @@ int board_early_init_f(void)
{
prcm_init();
set_mux_conf_regs();
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
update_rtc_magic();
#endif
return 0;
}
@ -278,13 +332,7 @@ static void rtc32k_enable(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(RTC_KICK0R_WE, &rtc->kick0r);
writel(RTC_KICK1R_WE, &rtc->kick1r);
rtc32k_unlock(rtc);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
@ -321,8 +369,54 @@ static void watchdog_disable(void)
;
}
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
/*
* Check if we are executing rtc-only + DDR mode, and resume from it if needed
*/
static void rtc_only(void)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
u32 scratch1;
void (*resume_func)(void);
scratch1 = readl(&rtc->scratch1);
/*
* Check RTC scratch against RTC_MAGIC_VAL, RTC_MAGIC_VAL is only
* written to this register when we want to wake up from RTC only
* with DDR in self-refresh mode. Contents of the RTC_SCRATCH1:
* bits 0-15: RTC_MAGIC_VAL
* bits 16-31: board type (needed for sdram_init)
*/
if ((scratch1 & 0xffff) != RTC_MAGIC_VAL)
return;
rtc32k_unlock(rtc);
/* Clear RTC magic */
writel(0, &rtc->scratch1);
/*
* Update board type based on value stored on RTC_SCRATCH1, this
* is done so that we don't need to read the board type from eeprom
* over i2c bus which is expensive
*/
rtc_only_update_board_type(scratch1 >> RTC_BOARD_TYPE_SHIFT);
rtc_only_prcm_init();
sdram_init();
resume_func = (void *)readl(&rtc->scratch0);
if (resume_func)
resume_func();
}
#endif
void s_init(void)
{
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)
rtc_only();
#endif
}
void early_system_init(void)

10
arch/arm/mach-omap2/am33xx/clock.c
View File

@ -244,3 +244,13 @@ void prcm_init(void)
scale_vcores();
setup_dplls();
}
void rtc_only_prcm_init(void)
{
const struct dpll_params *params;
rtc_only_enable_basic_clocks();
params = get_dpll_ddr_params();
do_setup_dpll(&dpll_ddr_regs, params);
}

21
arch/arm/mach-omap2/am33xx/clock_am43xx.c
View File

@ -124,6 +124,27 @@ void enable_basic_clocks(void)
writel(0x4, &cmdpll->clkselmacclk);
}
void rtc_only_enable_basic_clocks(void)
{
u32 *const clk_domains[] = {
&cmper->emifclkstctrl,
0
};
u32 *const clk_modules_explicit_en[] = {
&cmper->gpio5clkctrl,
&cmper->emiffwclkctrl,
&cmper->emifclkctrl,
&cmper->otfaemifclkctrl,
0
};
do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
/* Select the Master osc clk as Timer2 clock source */
writel(0x1, &cmdpll->clktimer2clk);
}
#ifdef CONFIG_TI_EDMA3
void enable_edma3_clocks(void)
{

1
board/ti/am43xx/MAINTAINERS
View File

@ -7,4 +7,5 @@ F: configs/am43xx_evm_defconfig
F: configs/am43xx_evm_ethboot_defconfig
F: configs/am43xx_evm_qspiboot_defconfig
F: configs/am43xx_evm_usbhost_boot_defconfig
F: configs/am43xx_evm_rtconly_defconfig
F: configs/am43xx_hs_evm_defconfig

56
board/ti/am43xx/board.c
View File

@ -520,6 +520,62 @@ static void enable_vtt_regulator(void)
writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
}
enum {
RTC_BOARD_EPOS = 1,
RTC_BOARD_EVM14,
RTC_BOARD_EVM12,
RTC_BOARD_GPEVM,
RTC_BOARD_SK,
};
/*
* In the rtc_only+DRR in self-refresh boot path we have the board type info
* in the rtc scratch pad register hence we bypass the costly i2c reads to
* eeprom and directly programthe board name string
*/
void rtc_only_update_board_type(u32 btype)
{
const char *name = "";
const char *rev = "1.0";
switch (btype) {
case RTC_BOARD_EPOS:
name = "AM43EPOS";
break;
case RTC_BOARD_EVM14:
name = "AM43__GP";
rev = "1.4";
break;
case RTC_BOARD_EVM12:
name = "AM43__GP";
rev = "1.2";
break;
case RTC_BOARD_GPEVM:
name = "AM43__GP";
break;
case RTC_BOARD_SK:
name = "AM43__SK";
break;
}
ti_i2c_eeprom_am_set(name, rev);
}
u32 rtc_only_get_board_type(void)
{
if (board_is_eposevm())
return RTC_BOARD_EPOS;
else if (board_is_evm_14_or_later())
return RTC_BOARD_EVM14;
else if (board_is_evm_12_or_later())
return RTC_BOARD_EVM12;
else if (board_is_gpevm())
return RTC_BOARD_GPEVM;
else if (board_is_sk())
return RTC_BOARD_SK;
return 0;
}
void sdram_init(void)
{
/*

59
configs/am43xx_evm_rtconly_defconfig Normal file
View File

@ -0,0 +1,59 @@
CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_AM43XX=y
CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y
CONFIG_SPL_RTC_DDR_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x00100000
CONFIG_CMD_SPL_WRITE_SIZE=0x40000
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(NAND.SPL),256k(NAND.SPL.backup1),256k(NAND.SPL.backup2),256k(NAND.SPL.backup3),512k(NAND.u-boot-spl-os),1m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup1),7m(NAND.kernel),-(NAND.file-system)"
CONFIG_OF_CONTROL=y
CONFIG_OF_LIST="am437x-gp-evm am437x-sk-evm am43x-epos-evm am437x-idk-evm"
CONFIG_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_PHYLIB=y
CONFIG_PHY_GIGE=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_TI_QSPI=y
CONFIG_TIMER=y
CONFIG_OMAP_TIMER=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_PHY_OMAP=y
CONFIG_OMAP_USB_PHY=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0403
CONFIG_USB_GADGET_PRODUCT_NUM=0xbd00
CONFIG_USB_GADGET_DOWNLOAD=y