mirror of
https://github.com/u-boot/u-boot.git
synced 2024-12-03 01:23:29 +08:00
ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4
Synchronize stm32f7 device tree with kernel v4.20. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
This commit is contained in:
Patrice Chotard
parent
933f84cab9
commit
71dfd5f3f5
@ -1,6 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
|
||||
* Author(s): Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
@ -342,12 +341,12 @@
|
||||
|
||||
sdio_pins: sdio_pins@0 {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('C', 8, AF12)>,
|
||||
<STM32_PINMUX('C', 9, AF12)>,
|
||||
<STM32_PINMUX('C', 10, AF12)>,
|
||||
<STM32_PINMUX('c', 11, AF12)>,
|
||||
<STM32_PINMUX('C', 12, AF12)>,
|
||||
<STM32_PINMUX('D', 2, AF12)>;
|
||||
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
|
||||
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
|
||||
<STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
|
||||
<STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
|
||||
<STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */
|
||||
<STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
|
||||
drive-push-pull;
|
||||
slew-rate = <2>;
|
||||
};
|
||||
@ -355,17 +354,17 @@
|
||||
|
||||
sdio_pins_od: sdio_pins_od@0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('C', 8, AF12)>,
|
||||
<STM32_PINMUX('C', 9, AF12)>,
|
||||
<STM32_PINMUX('C', 10, AF12)>,
|
||||
<STM32_PINMUX('C', 11, AF12)>,
|
||||
<STM32_PINMUX('C', 12, AF12)>;
|
||||
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
|
||||
<STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
|
||||
<STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
|
||||
<STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
|
||||
<STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */
|
||||
drive-push-pull;
|
||||
slew-rate = <2>;
|
||||
};
|
||||
|
||||
pins2 {
|
||||
pinmux = <STM32_PINMUX('D', 2, AF12)>;
|
||||
pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
|
||||
drive-open-drain;
|
||||
slew-rate = <2>;
|
||||
};
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2015, STMicroelectronics - All Rights Reserved
|
||||
* Author(s): Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
|
||||
* Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
@ -76,6 +75,7 @@
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
autorepeat;
|
||||
button@0 {
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
|
||||
* Author(s): Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2015, STMicroelectronics - All Rights Reserved
|
||||
* Author(s): Maxime Coquelin <mcoquelin.stm32@gmail.com> for STMicroelectronics.
|
||||
* Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
@ -259,6 +258,7 @@
|
||||
};
|
||||
|
||||
timers13: timers@40001c00 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32-timers";
|
||||
reg = <0x40001C00 0x400>;
|
||||
@ -273,6 +273,7 @@
|
||||
};
|
||||
|
||||
timers14: timers@40002000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32-timers";
|
||||
reg = <0x40002000 0x400>;
|
||||
@ -296,7 +297,7 @@
|
||||
interrupt-parent = <&exti>;
|
||||
interrupts = <17 1>;
|
||||
interrupt-names = "alarm";
|
||||
st,syscfg = <&pwrcfg>;
|
||||
st,syscfg = <&pwrcfg 0x00 0x100>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -304,6 +305,7 @@
|
||||
compatible = "st,stm32-iwdg";
|
||||
reg = <0x40003000 0x400>;
|
||||
clocks = <&clk_lsi>;
|
||||
clock-names = "lsi";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -505,6 +507,17 @@
|
||||
};
|
||||
};
|
||||
|
||||
sdio: sdio@40012c00 {
|
||||
compatible = "arm,pl180", "arm,primecell";
|
||||
arm,primecell-periphid = <0x00880180>;
|
||||
reg = <0x40012c00 0x400>;
|
||||
clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>;
|
||||
clock-names = "apb_pclk";
|
||||
interrupts = <49>;
|
||||
max-frequency = <48000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
syscfg: system-config@40013800 {
|
||||
compatible = "syscon";
|
||||
reg = <0x40013800 0x400>;
|
||||
@ -540,6 +553,7 @@
|
||||
};
|
||||
|
||||
timers10: timers@40014400 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32-timers";
|
||||
reg = <0x40014400 0x400>;
|
||||
@ -554,6 +568,7 @@
|
||||
};
|
||||
|
||||
timers11: timers@40014800 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32-timers";
|
||||
reg = <0x40014800 0x400>;
|
||||
@ -572,18 +587,6 @@
|
||||
reg = <0x40007000 0x400>;
|
||||
};
|
||||
|
||||
sdio: sdio@40012c00 {
|
||||
compatible = "st,stm32f4xx-sdio";
|
||||
reg = <0x40012c00 0x400>;
|
||||
clocks = <&rcc 0 171>;
|
||||
interrupts = <49>;
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_pins_od>;
|
||||
pinctrl-names = "default", "opendrain";
|
||||
max-frequency = <48000000>;
|
||||
};
|
||||
|
||||
ltdc: display-controller@40016800 {
|
||||
compatible = "st,stm32-ltdc";
|
||||
reg = <0x40016800 0x200>;
|
||||
|
||||
@ -41,8 +41,10 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "stm32f429.dtsi"
|
||||
#include "stm32f469.dtsi"
|
||||
#include "stm32f469-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "STMicroelectronics STM32F469i-DISCO board";
|
||||
@ -72,11 +74,40 @@
|
||||
dma-ranges = <0xc0000000 0x0 0x10000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
green {
|
||||
gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
orange {
|
||||
gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
red {
|
||||
gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
blue {
|
||||
gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
autorepeat;
|
||||
button@0 {
|
||||
label = "User";
|
||||
linux,code = <KEY_WAKEUP>;
|
||||
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* This turns on vbus for otg for host mode (dwc2) */
|
||||
vcc5v_otg: vcc5v-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpiob 2 0>;
|
||||
gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc5_host1";
|
||||
regulator-always-on;
|
||||
};
|
||||
@ -90,6 +121,55 @@
|
||||
clock-frequency = <8000000>;
|
||||
};
|
||||
|
||||
&dsi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
dsi_in: endpoint {
|
||||
remote-endpoint = <<dc_out_dsi>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
dsi_out: endpoint {
|
||||
remote-endpoint = <&dsi_panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
panel-dsi@0 {
|
||||
compatible = "orisetech,otm8009a";
|
||||
reg = <0>; /* dsi virtual channel (0..3) */
|
||||
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
dsi_panel_in: endpoint {
|
||||
remote-endpoint = <&dsi_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
<dc {
|
||||
dma-ranges;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
ltdc_out_dsi: endpoint@0 {
|
||||
remote-endpoint = <&dsi_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
@ -125,6 +205,8 @@
|
||||
&sdio {
|
||||
status = "okay";
|
||||
vmmc-supply = <&mmc_vcard>;
|
||||
cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
|
||||
broken-cd;
|
||||
pinctrl-names = "default", "opendrain";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_pins_od>;
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
|
||||
* Author(s): Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
|
||||
19
arch/arm/dts/stm32f469.dtsi
Normal file
19
arch/arm/dts/stm32f469.dtsi
Normal file
@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/* Copyright (C) STMicroelectronics 2017 - All Rights Reserved */
|
||||
|
||||
#include "stm32f429.dtsi"
|
||||
|
||||
/ {
|
||||
soc {
|
||||
dsi: dsi@40016c00 {
|
||||
compatible = "st,stm32-dsi";
|
||||
reg = <0x40016c00 0x800>;
|
||||
interrupts = <92>;
|
||||
resets = <&rcc STM32F4_APB2_RESET(DSI)>;
|
||||
reset-names = "apb";
|
||||
clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
|
||||
clock-names = "pclk", "ref";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -33,11 +33,12 @@
|
||||
#define CLK_SAI2 11
|
||||
#define CLK_I2SQ_PDIV 12
|
||||
#define CLK_SAIQ_PDIV 13
|
||||
|
||||
#define END_PRIMARY_CLK 14
|
||||
|
||||
#define CLK_HSI 14
|
||||
#define CLK_SYSCLK 15
|
||||
#define CLK_F469_DSI 16
|
||||
|
||||
#define END_PRIMARY_CLK 17
|
||||
|
||||
#define CLK_HDMI_CEC 16
|
||||
#define CLK_SPDIF 17
|
||||
#define CLK_USART1 18
|
||||
|
||||
Loading…
Reference in New Issue
Block a user