mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-29 23:53:33 +08:00
arm64: zynqmp: Remove pinctrl settings
This part hasn't been pushed to mainline yet that's why remove it. The patch can be reverted in future when this is pushed there. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexander Graf <agraf@suse.de>
This commit is contained in:
Michal Simek
parent
aedd54739f
commit
704744f81b
@ -13,7 +13,6 @@
|
||||
#include "zynqmp-clk-ccf.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
|
||||
/ {
|
||||
@ -70,8 +69,6 @@
|
||||
|
||||
&can1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can1_default>;
|
||||
};
|
||||
|
||||
&dcc {
|
||||
@ -114,8 +111,6 @@
|
||||
status = "okay";
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gem3_default>;
|
||||
phy0: phy@21 {
|
||||
reg = <21>;
|
||||
ti,rx-internal-delay = <0x8>;
|
||||
@ -126,8 +121,6 @@
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpio_default>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
@ -137,11 +130,6 @@
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default", "gpio";
|
||||
pinctrl-0 = <&pinctrl_i2c0_default>;
|
||||
pinctrl-1 = <&pinctrl_i2c0_gpio>;
|
||||
scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
|
||||
sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
tca6416_u97: gpio@20 {
|
||||
compatible = "ti,tca6416";
|
||||
@ -391,11 +379,6 @@
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default", "gpio";
|
||||
pinctrl-0 = <&pinctrl_i2c1_default>;
|
||||
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
||||
scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
/* PL i2c via PCA9306 - u45 */
|
||||
i2c-mux@74 { /* u34 */
|
||||
@ -545,269 +528,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl0 {
|
||||
status = "okay";
|
||||
pinctrl_i2c0_default: i2c0-default {
|
||||
mux {
|
||||
groups = "i2c0_3_grp";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "i2c0_3_grp";
|
||||
bias-pull-up;
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_i2c0_gpio: i2c0-gpio {
|
||||
mux {
|
||||
groups = "gpio0_14_grp", "gpio0_15_grp";
|
||||
function = "gpio0";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "gpio0_14_grp", "gpio0_15_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_i2c1_default: i2c1-default {
|
||||
mux {
|
||||
groups = "i2c1_4_grp";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "i2c1_4_grp";
|
||||
bias-pull-up;
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_i2c1_gpio: i2c1-gpio {
|
||||
mux {
|
||||
groups = "gpio0_16_grp", "gpio0_17_grp";
|
||||
function = "gpio0";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "gpio0_16_grp", "gpio0_17_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_uart0_default: uart0-default {
|
||||
mux {
|
||||
groups = "uart0_4_grp";
|
||||
function = "uart0";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "uart0_4_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
|
||||
conf-rx {
|
||||
pins = "MIO18";
|
||||
bias-high-impedance;
|
||||
};
|
||||
|
||||
conf-tx {
|
||||
pins = "MIO19";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_uart1_default: uart1-default {
|
||||
mux {
|
||||
groups = "uart1_5_grp";
|
||||
function = "uart1";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "uart1_5_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
|
||||
conf-rx {
|
||||
pins = "MIO21";
|
||||
bias-high-impedance;
|
||||
};
|
||||
|
||||
conf-tx {
|
||||
pins = "MIO20";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_usb0_default: usb0-default {
|
||||
mux {
|
||||
groups = "usb0_0_grp";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "usb0_0_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
|
||||
conf-rx {
|
||||
pins = "MIO52", "MIO53", "MIO55";
|
||||
bias-high-impedance;
|
||||
};
|
||||
|
||||
conf-tx {
|
||||
pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
|
||||
"MIO60", "MIO61", "MIO62", "MIO63";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_gem3_default: gem3-default {
|
||||
mux {
|
||||
function = "ethernet3";
|
||||
groups = "ethernet3_0_grp";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "ethernet3_0_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
|
||||
conf-rx {
|
||||
pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
|
||||
"MIO75";
|
||||
bias-high-impedance;
|
||||
low-power-disable;
|
||||
};
|
||||
|
||||
conf-tx {
|
||||
pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
|
||||
"MIO69";
|
||||
bias-disable;
|
||||
low-power-enable;
|
||||
};
|
||||
|
||||
mux-mdio {
|
||||
function = "mdio3";
|
||||
groups = "mdio3_0_grp";
|
||||
};
|
||||
|
||||
conf-mdio {
|
||||
groups = "mdio3_0_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_can1_default: can1-default {
|
||||
mux {
|
||||
function = "can1";
|
||||
groups = "can1_6_grp";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "can1_6_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
|
||||
conf-rx {
|
||||
pins = "MIO25";
|
||||
bias-high-impedance;
|
||||
};
|
||||
|
||||
conf-tx {
|
||||
pins = "MIO24";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_sdhci1_default: sdhci1-default {
|
||||
mux {
|
||||
groups = "sdio1_0_grp";
|
||||
function = "sdio1";
|
||||
};
|
||||
|
||||
conf {
|
||||
groups = "sdio1_0_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mux-cd {
|
||||
groups = "sdio1_0_cd_grp";
|
||||
function = "sdio1_cd";
|
||||
};
|
||||
|
||||
conf-cd {
|
||||
groups = "sdio1_0_cd_grp";
|
||||
bias-high-impedance;
|
||||
bias-pull-up;
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
|
||||
mux-wp {
|
||||
groups = "sdio1_0_wp_grp";
|
||||
function = "sdio1_wp";
|
||||
};
|
||||
|
||||
conf-wp {
|
||||
groups = "sdio1_0_wp_grp";
|
||||
bias-high-impedance;
|
||||
bias-pull-up;
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_gpio_default: gpio-default {
|
||||
mux-sw {
|
||||
function = "gpio0";
|
||||
groups = "gpio0_22_grp", "gpio0_23_grp";
|
||||
};
|
||||
|
||||
conf-sw {
|
||||
groups = "gpio0_22_grp", "gpio0_23_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
|
||||
mux-msp {
|
||||
function = "gpio0";
|
||||
groups = "gpio0_13_grp", "gpio0_38_grp";
|
||||
};
|
||||
|
||||
conf-msp {
|
||||
groups = "gpio0_13_grp", "gpio0_38_grp";
|
||||
slew-rate = <SLEW_RATE_SLOW>;
|
||||
io-standard = <IO_STANDARD_LVCMOS18>;
|
||||
};
|
||||
|
||||
conf-pull-up {
|
||||
pins = "MIO22", "MIO23";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
conf-pull-none {
|
||||
pins = "MIO13", "MIO38";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
@ -864,8 +584,6 @@
|
||||
/* SD1 with level shifter */
|
||||
&sdhci1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sdhci1_default>;
|
||||
no-1-8-v; /* for 1.0 silicon */
|
||||
xlnx,mio_bank = <1>;
|
||||
};
|
||||
@ -876,21 +594,15 @@
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart0_default>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1_default>;
|
||||
};
|
||||
|
||||
/* ULPI SMSC USB3320 */
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb0_default>;
|
||||
};
|
||||
|
||||
&dwc3_0 {
|
||||
|
||||
@ -1,30 +0,0 @@
|
||||
/*
|
||||
* MIO pin configuration defines for Xilinx ZynqMP
|
||||
*
|
||||
* Copyright (C) 2017 Xilinx, Inc.
|
||||
* Author: Chirag Parekh <chirag.parekh@xilinx.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_PINCTRL_ZYNQMP_H
|
||||
#define _DT_BINDINGS_PINCTRL_ZYNQMP_H
|
||||
|
||||
/* Bit value for IO standards */
|
||||
#define IO_STANDARD_LVCMOS33 0
|
||||
#define IO_STANDARD_LVCMOS18 1
|
||||
|
||||
/* Bit values for Slew Rates */
|
||||
#define SLEW_RATE_FAST 0
|
||||
#define SLEW_RATE_SLOW 1
|
||||
|
||||
/* Bit values for Pin inputs */
|
||||
#define PIN_INPUT_TYPE_CMOS 0
|
||||
#define PIN_INPUT_TYPE_SCHMITT 1
|
||||
|
||||
#endif /* _DT_BINDINGS_PINCTRL_ZYNQMP_H */
|
||||
Loading…
Reference in New Issue
Block a user