mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-28 23:23:30 +08:00
Code Issues Packages Projects Releases Wiki Activity

usb: dwc3: Add phy interface for dwc3_uboot

Browse Source 
U-Boot has two different variants of dwc3 initializations,
- with dm variant gadget, so the respective dm driver would
  call the dwc3_init in core.
- with non-dm variant gadget, so the usage board file would
  call dwc3_uboot_init in core.

The driver probe would handle all respective gadget properties
including phy interface via phy_type property and then trigger
dwc3_init for dm-variant gadgets.

So, to support the phy interface for non-dm variant gadgets,
the better option is dwc3_uboot_init since there is no
dedicated controller for non-dm variant gadgets.

This patch support for adding phy interface like 8/16-bit UTMI+
code for dwc3_uboot.

This change used Linux phy.h enum list, to make proper code
compatibility.

Cc: Marek Vasut <marex@denx.de>
Tested-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jagan Teki 2019-11-19 13:56:20 +05:30 committed by Kever Yang
parent 35172ac02f
commit 6b7ebff001
4 changed files with 60 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
drivers/usb/dwc3/core.c
View File

@ -613,6 +613,31 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
dwc3_gadget_run(dwc);
}
static void dwc3_uboot_hsphy_mode(struct dwc3_device *dwc3_dev,
struct dwc3 *dwc)
{
enum usb_phy_interface hsphy_mode = dwc3_dev->hsphy_mode;
u32 reg;
/* Set dwc3 usb2 phy config */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
reg |= DWC3_GUSB2PHYCFG_PHYIF;
reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
switch (hsphy_mode) {
case USBPHY_INTERFACE_MODE_UTMI:
reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT;
break;
case USBPHY_INTERFACE_MODE_UTMIW:
reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
break;
default:
break;
}
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
}
#define DWC3_ALIGN_MASK (16 - 1)
/**
@ -721,6 +746,8 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
goto err0;
}
dwc3_uboot_hsphy_mode(dwc3_dev, dwc);
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");

12
drivers/usb/dwc3/core.h
View File

@ -162,6 +162,18 @@
/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
#define DWC3_GUSB2PHYCFG_PHYIF BIT(3)
/* Global USB2 PHY Configuration Mask */
#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK (0xf << 10)
/* Global USB2 PHY Configuration Offset */
#define DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET 10
#define DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT (0x5 << \
DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET)
#define DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT (0x9 << \
DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET)
/* Global USB3 PIPE Control Register */
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)

2
include/dwc3-uboot.h
View File

@ -10,10 +10,12 @@
#define __DWC3_UBOOT_H_
#include <linux/usb/otg.h>
#include <linux/usb/phy.h>
struct dwc3_device {
unsigned long base;
enum usb_dr_mode dr_mode;
enum usb_phy_interface hsphy_mode;
u32 maximum_speed;
unsigned tx_fifo_resize:1;
unsigned has_lpm_erratum;

19
include/linux/usb/phy.h Normal file
View File

@ -0,0 +1,19 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* USB PHY defines
*
* These APIs may be used between USB controllers. USB device drivers
* (for either host or peripheral roles) don't use these calls; they
* continue to use just usb_device and usb_gadget.
*/
#ifndef __LINUX_USB_PHY_H
#define __LINUX_USB_PHY_H
enum usb_phy_interface {
USBPHY_INTERFACE_MODE_UNKNOWN,
USBPHY_INTERFACE_MODE_UTMI,
USBPHY_INTERFACE_MODE_UTMIW,
};
#endif /* __LINUX_USB_PHY_H */