mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-24 04:34:22 +08:00
Code Issues Packages Projects Releases Wiki Activity

rtc: remove CONFIG_CMD_DATE dependency

Browse Source 
The EFI subsystem accesses the real time clock and is enabled by default.
So we should drop any CONFIG_CMD_DATE dependency from the real time clock
drivers.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This commit is contained in:
Heinrich Schuchardt 2018-07-07 23:39:12 +02:00 committed by Alexander Graf
parent 62045b0eb4
commit 5d88902401
24 changed files with 0 additions and 89 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/rtc/at91sam9_rtt.c
View File

@ -27,8 +27,6 @@
#include <asm/arch/at91_rtt.h>
#include <asm/arch/at91_gpbr.h>
#if defined(CONFIG_CMD_DATE)
int rtc_get (struct rtc_time *tmp)
{
at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT;
@ -78,5 +76,3 @@ void rtc_reset (void)
while (readl(&rtt->vr) != 0)
;
}
#endif

2
drivers/rtc/davinci.c
View File

@ -9,7 +9,6 @@
#include <asm/io.h>
#include <asm/davinci_rtc.h>
#if defined(CONFIG_CMD_DATE)
int rtc_get(struct rtc_time *tmp)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)DAVINCI_RTC_BASE;
@ -79,4 +78,3 @@ void rtc_reset(void)
/* run RTC counter */
writel(0x01, &rtc->ctrl);
}
#endif

4
drivers/rtc/ds1302.c
View File

@ -9,8 +9,6 @@
#include <command.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
/* GPP Pins */
#define DATA 0x200
#define SCLK 0x400
@ -328,5 +326,3 @@ int rtc_set(struct rtc_time *tmp)
return 0;
}
#endif

4
drivers/rtc/ds1306.c
View File

@ -19,8 +19,6 @@
#include <rtc.h>
#include <spi.h>
#if defined(CONFIG_CMD_DATE)
#define RTC_SECONDS 0x00
#define RTC_MINUTES 0x01
#define RTC_HOURS 0x02
@ -437,5 +435,3 @@ static void rtc_write (unsigned char reg, unsigned char val)
}
#endif /* end of code exclusion (see #ifdef CONFIG_SXNI855T above) */
#endif

4
drivers/rtc/ds1307.c
View File

@ -51,8 +51,6 @@ enum ds_type {
#ifndef CONFIG_DM_RTC
#if defined(CONFIG_CMD_DATE)
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
@ -204,8 +202,6 @@ static void rtc_write (uchar reg, uchar val)
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif /* CONFIG_CMD_DATE*/
#endif /* !CONFIG_DM_RTC */
#ifdef CONFIG_DM_RTC

4
drivers/rtc/ds1337.c
View File

@ -15,8 +15,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*
* RTC register addresses
*/
@ -190,5 +188,3 @@ static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif

3
drivers/rtc/ds1374.c
View File

@ -18,8 +18,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
#define DEBUG_RTC
@ -214,4 +212,3 @@ static void rtc_write_raw (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif

4
drivers/rtc/ds164x.c
View File

@ -20,8 +20,6 @@
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
static uchar rtc_read(unsigned int addr );
static void rtc_write(unsigned int addr, uchar val);
@ -171,5 +169,3 @@ static void rtc_write( unsigned int addr, uchar val )
#endif
*(volatile unsigned char*)(addr) = val;
}
#endif

4
drivers/rtc/ds174x.c
View File

@ -16,8 +16,6 @@
#include <command.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
static uchar rtc_read( unsigned int addr );
static void rtc_write( unsigned int addr, uchar val);
@ -172,5 +170,3 @@ static void rtc_write( unsigned int addr, uchar val )
#endif
out8( addr, val );
}
#endif

4
drivers/rtc/ds3231.c
View File

@ -16,8 +16,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*
* RTC register addresses
*/
@ -166,5 +164,3 @@ static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif

4
drivers/rtc/imxdi.c
View File

@ -17,8 +17,6 @@
#include <linux/compat.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
@ -222,5 +220,3 @@ void rtc_reset(void)
{
di_init();
}
#endif

3
drivers/rtc/m41t11.c
View File

@ -29,8 +29,6 @@
#endif
*/
#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
/* ------------------------------------------------------------------------- */
/*
these are simple defines for the chip local to here so they aren't too
@ -167,4 +165,3 @@ void rtc_reset (void)
val = val & 0x3F;/*turn off freq test keep calibration*/
i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
}
#endif

3
drivers/rtc/m41t60.c
View File

@ -20,8 +20,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
/*
* Convert between century and "century bits" (CB1 and CB0). These routines
* assume years are in the range 1900 - 2299.
@ -237,4 +235,3 @@ void rtc_reset(void)
}
rtc_dump("end reset");
}
#endif /* CONFIG_RTC_M41T60 && CONFIG_SYS_I2C_RTC_ADDR && CONFIG_CMD_DATE */

4
drivers/rtc/m41t62.c
View File

@ -18,8 +18,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
#define M41T62_REG_SSEC 0
#define M41T62_REG_SEC 1
#define M41T62_REG_MIN 2
@ -130,5 +128,3 @@ void rtc_reset(void)
val &= ~M41T80_ALHOUR_HT;
i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
}
#endif

4
drivers/rtc/m48t35ax.c
View File

@ -16,8 +16,6 @@
#include <rtc.h>
#include <config.h>
#if defined(CONFIG_CMD_DATE)
static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val);
@ -135,5 +133,3 @@ static void rtc_write (uchar reg, uchar val)
*(unsigned char *)
((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg) = val;
}
#endif

4
drivers/rtc/max6900.c
View File

@ -15,8 +15,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
#ifndef CONFIG_SYS_I2C_RTC_ADDR
#define CONFIG_SYS_I2C_RTC_ADDR 0x50
#endif
@ -104,5 +102,3 @@ int rtc_set (struct rtc_time *tmp)
void rtc_reset (void)
{
}
#endif

3
drivers/rtc/mc146818.c
View File

@ -19,8 +19,6 @@
#define out8(p, v) outb(v, p)
#endif
#if defined(CONFIG_CMD_DATE)
/* Set this to 1 to clear the CMOS RAM */
#define CLEAR_CMOS 0
@ -195,7 +193,6 @@ static void mc146818_init(void)
/* Clear any pending interrupts */
mc146818_read8(RTC_CONFIG_C);
}
#endif /* CONFIG_CMD_DATE */
#ifdef CONFIG_DM_RTC

4
drivers/rtc/mcfrtc.c
View File

@ -6,8 +6,6 @@
#include <common.h>
#if defined(CONFIG_CMD_DATE)
#include <command.h>
#include <rtc.h>
#include <asm/immap.h>
@ -104,5 +102,3 @@ void rtc_reset(void)
rtc->cr |= RTC_CR_SWR;
}
#endif /* CONFIG_MCFRTC && CONFIG_CMD_DATE */

4
drivers/rtc/mk48t59.c
View File

@ -70,8 +70,6 @@ void nvram_write(short dest, const void *src, size_t count)
rtc_write(d++, *s++);
}
#if defined(CONFIG_CMD_DATE)
/* ------------------------------------------------------------------------- */
int rtc_get (struct rtc_time *tmp)
@ -175,5 +173,3 @@ void rtc_set_watchdog(short multi, short res)
wd_value = RTC_WDS | ((multi & 0x1F) << 2) | (res & 0x3);
rtc_write(RTC_WATCHDOG, wd_value);
}
#endif

4
drivers/rtc/pcf8563.c
View File

@ -15,8 +15,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val);
@ -117,5 +115,3 @@ static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif

3
drivers/rtc/rs5c372.c
View File

@ -24,7 +24,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*
* Reads are always done starting with register 15, which requires some
* jumping-through-hoops to access the data correctly.
@ -255,5 +254,3 @@ rtc_reset (void)
if (!setup_done)
rs5c372_enable();
}
#endif

4
drivers/rtc/rx8025.c
View File

@ -13,8 +13,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
/*---------------------------------------------------------------------*/
#undef DEBUG_RTC
@ -190,5 +188,3 @@ static void rtc_write (uchar reg, uchar val)
printf("Error writing to RTC\n");
}
#endif /* CONFIG_RTC_RX8025 && CONFIG_CMD_DATE */

4
drivers/rtc/s3c24x0_rtc.c
View File

@ -11,8 +11,6 @@
#include <common.h>
#include <command.h>
#if (defined(CONFIG_CMD_DATE))
#include <asm/arch/s3c24x0_cpu.h>
#include <rtc.h>
@ -149,5 +147,3 @@ void rtc_reset(void)
writeb((readb(&rtc->rtccon) & ~0x06) | 0x08, &rtc->rtccon);
writeb(readb(&rtc->rtccon) & ~(0x08 | 0x01), &rtc->rtccon);
}
#endif

4
drivers/rtc/x1205.c
View File

@ -22,8 +22,6 @@
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
#define CCR_SEC 0
#define CCR_MIN 1
#define CCR_HOUR 2
@ -160,5 +158,3 @@ void rtc_reset(void)
* Nothing to do
*/
}
#endif