mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-11-24 04:34:22 +08:00
Code Issues Packages Projects Releases Wiki Activity

powerpc, 8xx: remove support for 8xx

Browse Source 
There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Heiko Schocher 2017-06-07 17:33:09 +02:00 committed by Tom Rini
parent 4a30a93929
commit 5b8e76c35e
143 changed files with 45 additions and 21631 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.travis.yml
View File

@ -217,8 +217,6 @@ matrix:
- BUILDMAN="corenet_ds b4860qds sbc8548 bsc91*"
- env:
- BUILDMAN="mpc86xx"
- env:
- BUILDMAN="mpc8xx"
- env:
- BUILDMAN="siemens"
- env:

88
README
View File

@ -328,34 +328,6 @@ The following options need to be configured:
multiple fs option at one time
for marvell soc family
- 8xx CPU Options: (if using an MPC8xx CPU)
CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if
get_gclk_freq() cannot work
e.g. if there is no 32KHz
reference PIT/RTC clock
CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK
or XTAL/EXTAL)
- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU):
CONFIG_SYS_8xx_CPUCLK_MIN
CONFIG_SYS_8xx_CPUCLK_MAX
CONFIG_8xx_CPUCLK_DEFAULT
See doc/README.MPC866
CONFIG_SYS_MEASURE_CPUCLK
Define this to measure the actual CPU clock instead
of relying on the correctness of the configured
values. Mostly useful for board bringup to make sure
the PLL is locked at the intended frequency. Note
that this requires a (stable) reference clock (32 kHz
RTC clock or CONFIG_SYS_8XX_XIN)
CONFIG_SYS_DELAYED_ICACHE
Define this option if you want to enable the
ICache only when Code runs from RAM.
- 85xx CPU Options:
CONFIG_SYS_PPC64
@ -723,26 +695,15 @@ The following options need to be configured:
Define this variable to enable hw flow control in serial driver.
Current user of this option is drivers/serial/nsl16550.c driver
- Console Interface:
Depending on board, define exactly one serial port
(like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2,
CONFIG_8xx_CONS_SCC1, ...), or switch off the serial
console by defining CONFIG_8xx_CONS_NONE
Note: if CONFIG_8xx_CONS_NONE is defined, the serial
port routines must be defined elsewhere
(i.e. serial_init(), serial_getc(), ...)
- Console Baudrate:
CONFIG_BAUDRATE - in bps
Select one of the baudrates listed in
CONFIG_SYS_BAUDRATE_TABLE, see below.
CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale
- Console Rx buffer length
With CONFIG_SYS_SMC_RXBUFLEN it is possible to define
the maximum receive buffer length for the SMC.
This option is actual only for 82xx and 8xx possible.
This option is actual only for 82xx possible.
If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE
must be defined, to setup the maximum idle timeout for
the SMC.
@ -912,7 +873,7 @@ The following options need to be configured:
Note: Don't enable the "icache" and "dcache" commands
(configuration option CONFIG_CMD_CACHE) unless you know
what you (and your U-Boot users) are doing. Data
cache cannot be enabled on systems like the 8xx or
cache cannot be enabled on systems like the
8260 (where accesses to the IMMR region must be
uncached), and it cannot be disabled on all other
systems where we (mis-) use the data cache to hold an
@ -976,7 +937,7 @@ The following options need to be configured:
CONFIG_WATCHDOG
If this variable is defined, it enables watchdog
support for the SoC. There must be support in the SoC
specific code for a watchdog. For the 8xx and 8260
specific code for a watchdog. For the 8260
CPUs, the SIU Watchdog feature is enabled in the SYPCR
register. When supported for a specific SoC is
available, then no further board specific code should
@ -1004,7 +965,6 @@ The following options need to be configured:
has to be selected, too. Define exactly one of the
following options:
CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx
CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC
CONFIG_RTC_MC13XXX - use MC13783 or MC13892 RTC
CONFIG_RTC_MC146818 - use MC146818 RTC
@ -1345,11 +1305,6 @@ The following options need to be configured:
Define this if you want stdin, stdout &/or stderr to
be set to usbtty.
mpc8xx:
CONFIG_SYS_USB_EXTC_CLK 0xBLAH
Derive USB clock from external clock "blah"
- CONFIG_SYS_USB_EXTC_CLK 0x02
If you have a USB-IF assigned VendorID then you may wish to
define your own vendor specific values either in BoardName.h
or directly in usbd_vendor_info.h. If you don't define
@ -1953,7 +1908,7 @@ The following options need to be configured:
Defining CONFIG_CAN_DRIVER enables CAN driver support
on those systems that support this (optional)
feature, like the TQM8xxL modules.
feature.
- I2C Support: CONFIG_SYS_I2C
@ -2445,7 +2400,7 @@ The following options need to be configured:
following board configurations are known to be
"pRAM-clean":
IVMS8, IVML24, SPD8xx, TQM8xxL,
IVMS8, IVML24, SPD8xx,
HERMES, IP860, RPXlite, LWMON,
FLAGADM, TQM8260
@ -4048,7 +4003,7 @@ Low Level (hardware related) configuration options:
- CONFIG_SYS_IMMR: Physical address of the Internal Memory.
DO NOT CHANGE unless you know exactly what you're
doing! (11-4) [MPC8xx/82xx systems only]
doing! (11-4) [82xx systems only]
- CONFIG_SYS_INIT_RAM_ADDR:
@ -4061,7 +4016,7 @@ Low Level (hardware related) configuration options:
sequences.
U-Boot uses the following memory types:
- MPC8xx and MPC8260: IMMR (internal memory of the CPU)
- MPC8260: IMMR (internal memory of the CPU)
- MPC824X: data cache
- PPC4xx: data cache
@ -4119,19 +4074,7 @@ Low Level (hardware related) configuration options:
Machine Mode Register and Memory Periodic Timer
Prescaler definitions (SDRAM timing)
- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]:
enable I2C microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [DSP2]
- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]:
enable SMC microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [SMC1]
- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]:
enable SPI microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [SCC4]
- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8260 only)
Offset of the bootmode word in DPRAM used by post
(Power On Self Tests). This definition overrides
#define'd default value in commproc.h resp.
@ -4225,21 +4168,6 @@ Low Level (hardware related) configuration options:
Only for 83xx systems. If specified, then DDR should
be configured using CS0 and CS1 instead of CS2 and CS3.
- CONFIG_ETHER_ON_FEC[12]
Define to enable FEC[12] on a 8xx series processor.
- CONFIG_FEC[12]_PHY
Define to the hardcoded PHY address which corresponds
to the given FEC; i. e.
#define CONFIG_FEC1_PHY 4
means that the PHY with address 4 is connected to FEC1
When set to -1, means to probe for first available.
- CONFIG_FEC[12]_PHY_NORXERR
The PHY does not have a RXERR line (RMII only).
(so program the FEC to ignore it).
- CONFIG_RMII
Enable RMII mode for all FECs.
Note that this is a global option, we can't

2
api/api_platform-powerpc.c
View File

@ -30,7 +30,7 @@ int platform_sys_info(struct sys_info *si)
si->clk_bus = gd->bus_clk;
si->clk_cpu = gd->cpu_clk;
#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || \
#if defined(CONFIG_5xx) || defined(CONFIG_MPC8260) || \
defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
#define bi_bar bi_immr_base
#elif defined(CONFIG_MPC5xxx)

4
arch/powerpc/Kconfig
View File

@ -41,9 +41,6 @@ config MPC86xx
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
config 8xx
bool "MPC8xx"
config 4xx
bool "PPC4xx"
select CREATE_ARCH_SYMLINK
@ -60,7 +57,6 @@ source "arch/powerpc/cpu/mpc8260/Kconfig"
source "arch/powerpc/cpu/mpc83xx/Kconfig"
source "arch/powerpc/cpu/mpc85xx/Kconfig"
source "arch/powerpc/cpu/mpc86xx/Kconfig"
source "arch/powerpc/cpu/mpc8xx/Kconfig"
source "arch/powerpc/cpu/ppc4xx/Kconfig"
endmenu

51
arch/powerpc/cpu/mpc8xx/Kconfig
View File

@ -1,51 +0,0 @@
menu "mpc8xx CPU"
depends on 8xx
config SYS_CPU
default "mpc8xx"
choice
prompt "Target select"
optional
config TARGET_TQM823L
bool "Support TQM823L"
config TARGET_TQM823M
bool "Support TQM823M"
config TARGET_TQM850L
bool "Support TQM850L"
config TARGET_TQM850M
bool "Support TQM850M"
config TARGET_TQM855L
bool "Support TQM855L"
config TARGET_TQM855M
bool "Support TQM855M"
config TARGET_TQM860L
bool "Support TQM860L"
config TARGET_TQM860M
bool "Support TQM860M"
config TARGET_TQM862L
bool "Support TQM862L"
config TARGET_TQM862M
bool "Support TQM862M"
config TARGET_TQM866M
bool "Support TQM866M"
config TARGET_TQM885D
bool "Support TQM885D"
endchoice
source "board/tqc/tqm8xx/Kconfig"
endmenu

25
arch/powerpc/cpu/mpc8xx/Makefile
View File

@ -1,25 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
# ccflags-y += -DET_DEBUG
extra-y += start.o
extra-y += traps.o
obj-y += bedbug_860.o
obj-y += cpu.o
obj-y += cpu_init.o
obj-y += fec.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-y += interrupts.o
obj-y += scc.o
obj-y += serial.o
obj-y += speed.o
obj-y += spi.o
obj-y += upatch.o
obj-y += video.o
obj-y += kgdb.o
obj-y += plprcr_write.o

314
arch/powerpc/cpu/mpc8xx/bedbug_860.c
View File

@ -1,314 +0,0 @@
/*
* Bedbug Functions specific to the MPC860 chip
*/
#include <common.h>
#include <command.h>
#include <linux/ctype.h>
#include <bedbug/bedbug.h>
#include <bedbug/regs.h>
#include <bedbug/ppc.h>
#include <bedbug/type.h>
#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_8xx)
#define MAX_BREAK_POINTS 2
extern CPU_DEBUG_CTX bug_ctx;
void bedbug860_init __P((void));
void bedbug860_do_break __P((cmd_tbl_t*,int,int,char*const[]));
void bedbug860_break_isr __P((struct pt_regs*));
int bedbug860_find_empty __P((void));
int bedbug860_set __P((int,unsigned long));
int bedbug860_clear __P((int));
/* ======================================================================
* Initialize the global bug_ctx structure for the MPC860. Clear all
* of the breakpoints.
* ====================================================================== */
void bedbug860_init( void )
{
int i;
/* -------------------------------------------------- */
bug_ctx.hw_debug_enabled = 0;
bug_ctx.stopped = 0;
bug_ctx.current_bp = 0;
bug_ctx.regs = NULL;
bug_ctx.do_break = bedbug860_do_break;
bug_ctx.break_isr = bedbug860_break_isr;
bug_ctx.find_empty = bedbug860_find_empty;
bug_ctx.set = bedbug860_set;
bug_ctx.clear = bedbug860_clear;
for( i = 1; i <= MAX_BREAK_POINTS; ++i )
(*bug_ctx.clear)( i );
puts ("BEDBUG:ready\n");
return;
} /* bedbug_init_breakpoints */
/* ======================================================================
* Set/clear/show one of the hardware breakpoints for the 860. The "off"
* string will disable a specific breakpoint. The "show" string will
* display the current breakpoints. Otherwise an address will set a
* breakpoint at that address. Setting a breakpoint uses the CPU-specific
* set routine which will assign a breakpoint number.
* ====================================================================== */
void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
long addr = 0; /* Address to break at */
int which_bp; /* Breakpoint number */
/* -------------------------------------------------- */
if (argc < 2) {
cmd_usage(cmdtp);
return;
}
/* Turn off a breakpoint */
if( strcmp( argv[ 1 ], "off" ) == 0 )
{
if( bug_ctx.hw_debug_enabled == 0 )
{
printf( "No breakpoints enabled\n" );
return;
}
which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
if( bug_ctx.clear )
(*bug_ctx.clear)( which_bp );
printf( "Breakpoint %d removed\n", which_bp );
return;
}
/* Show a list of breakpoints */
if( strcmp( argv[ 1 ], "show" ) == 0 )
{
for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
{
switch( which_bp )
{
case 1: addr = GET_CMPA(); break;
case 2: addr = GET_CMPB(); break;
case 3: addr = GET_CMPC(); break;
case 4: addr = GET_CMPD(); break;
}
printf( "Breakpoint [%d]: ", which_bp );
if( addr == 0 )
printf( "NOT SET\n" );
else
disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
}
return;
}
/* Set a breakpoint at the address */
if( !isdigit( argv[ 1 ][ 0 ])) {
cmd_usage(cmdtp);
return;
}
addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc;
if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
{
printf( "Breakpoint [%d]: ", which_bp );
disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
}
return;
} /* bedbug860_do_break */
/* ======================================================================
* Handle a breakpoint. First determine which breakpoint was hit by
* looking at the DeBug Status Register (DBSR), clear the breakpoint
* and enter a mini main loop. Stay in the loop until the stopped flag
* in the debug context is cleared.
* ====================================================================== */
void bedbug860_break_isr( struct pt_regs *regs )
{
unsigned long addr; /* Address stopped at */
unsigned long cause; /* Address stopped at */
/* -------------------------------------------------- */
cause = GET_ICR();
if( !(cause & 0x00000004)) {
printf( "Not an instruction breakpoint (ICR 0x%08lx)\n", cause );
return;
}
addr = regs->nip;
if( addr == GET_CMPA() )
{
bug_ctx.current_bp = 1;
}
else if( addr == GET_CMPB() )
{
bug_ctx.current_bp = 2;
}
else if( addr == GET_CMPC() )
{
bug_ctx.current_bp = 3;
}
else if( addr == GET_CMPD() )
{
bug_ctx.current_bp = 4;
}
bedbug_main_loop( addr, regs );
return;
} /* bedbug860_break_isr */
/* ======================================================================
* Look through all of the hardware breakpoints available to see if one
* is unused.
* ====================================================================== */
int bedbug860_find_empty( void )
{
/* -------------------------------------------------- */
if( GET_CMPA() == 0 )
return 1;
if( GET_CMPB() == 0 )
return 2;
if( GET_CMPC() == 0 )
return 3;
if( GET_CMPD() == 0 )
return 4;
return 0;
} /* bedbug860_find_empty */
/* ======================================================================
* Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
* number, otherwise reassign the given breakpoint. If hardware debugging
* is not enabled, then turn it on via the MSR and DBCR0. Set the break
* address in the appropriate IACx register and enable proper address
* beakpoint in DBCR0.
* ====================================================================== */
int bedbug860_set( int which_bp, unsigned long addr )
{
/* -------------------------------------------------- */
/* Only look if which_bp == 0, else use which_bp */
if(( bug_ctx.find_empty ) && ( !which_bp ) &&
( which_bp = (*bug_ctx.find_empty)()) == 0 )
{
printf( "All breakpoints in use\n" );
return 0;
}
if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
{
printf( "Invalid break point # %d\n", which_bp );
return 0;
}
if( ! bug_ctx.hw_debug_enabled )
{
bug_ctx.hw_debug_enabled = 1;
SET_DER( GET_DER() | 0x00000004 );
}
switch( which_bp )
{
case 1:
SET_CMPA( addr );
SET_ICTRL( GET_ICTRL() | 0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
break;
case 2:
SET_CMPB( addr );
SET_ICTRL( GET_ICTRL() | 0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
break;
case 3:
SET_CMPC( addr );
SET_ICTRL( GET_ICTRL() | 0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
break;
case 4:
SET_CMPD( addr );
SET_ICTRL( GET_ICTRL() | 0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
break;
}
return which_bp;
} /* bedbug860_set */
/* ======================================================================
* Disable a specific breakoint by setting the appropriate IACx register
* to zero and claring the instruction address breakpoint in DBCR0.
* ====================================================================== */
int bedbug860_clear( int which_bp )
{
/* -------------------------------------------------- */
if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
{
printf( "Invalid break point # (%d)\n", which_bp );
return -1;
}
switch( which_bp )
{
case 1:
SET_CMPA( 0 );
SET_ICTRL( GET_ICTRL() & ~0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
break;
case 2:
SET_CMPB( 0 );
SET_ICTRL( GET_ICTRL() & ~0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
break;
case 3:
SET_CMPC( 0 );
SET_ICTRL( GET_ICTRL() & ~0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
break;
case 4:
SET_CMPD( 0 );
SET_ICTRL( GET_ICTRL() & ~0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
break;
}
return 0;
} /* bedbug860_clear */
/* ====================================================================== */
#endif

8
arch/powerpc/cpu/mpc8xx/config.mk
View File

@ -1,8 +0,0 @@
#
# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
PLATFORM_CPPFLAGS += -mstring -mcpu=860 -msoft-float

580
arch/powerpc/cpu/mpc8xx/cpu.c
View File

@ -1,580 +0,0 @@
/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* m8xx.c
*
* CPU specific code
*
* written or collected and sometimes rewritten by
* Magnus Damm <damm@bitsmart.com>
*
* minor modifications by
* Wolfgang Denk <wd@denx.de>
*/
#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <mpc8xx.h>
#include <commproc.h>
#include <netdev.h>
#include <asm/cache.h>
#include <linux/compiler.h>
#include <asm/io.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <fdt_support.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
static char *cpu_warning = "\n " \
"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
!defined(CONFIG_MPC862))
static int check_CPU (long clock, uint pvr, uint immr)
{
char *id_str =
# if defined(CONFIG_MPC855)
"PC855";
# elif defined(CONFIG_MPC860P)
"PC860P";
# else
NULL;
# endif
volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
uint k, m;
char buf[32];
char pre = 'X';
char *mid = "xx";
char *suf;
/* the highest 16 bits should be 0x0050 for a 860 */
if ((pvr >> 16) != 0x0050)
return -1;
k = (immr << 16) |
immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
suf = "";
/*
* Some boards use sockets so different CPUs can be used.
* We have to check chip version in run time.
*/
switch (k) {
case 0x00020001: pre = 'P'; break;
case 0x00030001: break;
case 0x00120003: suf = "A"; break;
case 0x00130003: suf = "A3"; break;
case 0x00200004: suf = "B"; break;
case 0x00300004: suf = "C"; break;
case 0x00310004: suf = "C1"; m = 1; break;
case 0x00200064: mid = "SR"; suf = "B"; break;
case 0x00300065: mid = "SR"; suf = "C"; break;
case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
case 0x05010000: suf = "D3"; m = 1; break;
case 0x05020000: suf = "D4"; m = 1; break;
/* this value is not documented anywhere */
case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
/* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
case 0x08010004: /* Rev. A.0 */
suf = "A";
/* fall through */
case 0x08000003: /* Rev. 0.3 */
pre = 'M'; m = 1;
if (id_str == NULL)
id_str =
# if defined(CONFIG_MPC859T)
"PC859T";
# else
"PC866x"; /* Unknown chip from MPC866 family */
# endif
break;
case 0x09000000: pre = 'M'; mid = suf = ""; m = 1;
if (id_str == NULL)
id_str = "PC885"; /* 870/875/880/885 */
break;
default: suf = NULL; break;
}
if (id_str == NULL)
id_str = "PC86x"; /* Unknown 86x chip */
if (suf)
printf ("%c%s%sZPnn%s", pre, id_str, mid, suf);
else
printf ("unknown M%s (0x%08x)", id_str, k);
#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX)
printf (" at %s MHz [%d.%d...%d.%d MHz]\n ",
strmhz (buf, clock),
CONFIG_SYS_8xx_CPUCLK_MIN / 1000000,
((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
CONFIG_SYS_8xx_CPUCLK_MAX / 1000000,
((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
);
#else
printf (" at %s MHz: ", strmhz (buf, clock));
#endif
print_size(checkicache(), " I-Cache ");
print_size(checkdcache(), " D-Cache");
/* do we have a FEC (860T/P or 852/859/866/885)? */
immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
printf (" FEC present");
}
if (!m) {
puts (cpu_warning);
}
putc ('\n');
#ifdef DEBUG
if(clock != measure_gclk()) {
printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
}
#endif
return 0;
}
#elif defined(CONFIG_MPC862)
static int check_CPU (long clock, uint pvr, uint immr)
{
volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
uint k, m;
char buf[32];
char pre = 'X';
__maybe_unused char *mid = "xx";
char *suf;
/* the highest 16 bits should be 0x0050 for a 8xx */
if ((pvr >> 16) != 0x0050)
return -1;
k = (immr << 16) |
immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
switch (k) {
/* this value is not documented anywhere */
case 0x06000000: mid = "P"; suf = "0"; break;
case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
default: suf = NULL; break;
}
#ifndef CONFIG_MPC857
if (suf)
printf ("%cPC862%sZPnn%s", pre, mid, suf);
else
printf ("unknown MPC862 (0x%08x)", k);
#else
if (suf)
printf ("%cPC857TZPnn%s", pre, suf); /* only 857T tested right now! */
else
printf ("unknown MPC857 (0x%08x)", k);
#endif
printf(" at %s MHz: ", strmhz(buf, clock));
print_size(checkicache(), " I-Cache ");
print_size(checkdcache(), " D-Cache");
/* lets check and see if we're running on a 862T (or P?) */
immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
printf (" FEC present");
}
if (!m) {
puts (cpu_warning);
}
putc ('\n');
return 0;
}
#elif defined(CONFIG_MPC823)
static int check_CPU (long clock, uint pvr, uint immr)
{
volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
uint k, m;
char buf[32];
char *suf;
/* the highest 16 bits should be 0x0050 for a 8xx */
if ((pvr >> 16) != 0x0050)
return -1;
k = (immr << 16) |
in_be16(&immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]);
m = 0;
switch (k) {
/* MPC823 */
case 0x20000000: suf = "0"; break;
case 0x20010000: suf = "0.1"; break;
case 0x20020000: suf = "Z2/3"; break;
case 0x20020001: suf = "Z3"; break;
case 0x21000000: suf = "A"; break;
case 0x21010000: suf = "B"; m = 1; break;
case 0x21010001: suf = "B2"; m = 1; break;
/* MPC823E */
case 0x24010000: suf = NULL;
puts ("PPC823EZTnnB2");
m = 1;
break;
default:
suf = NULL;
printf ("unknown MPC823 (0x%08x)", k);
break;
}
if (suf)
printf ("PPC823ZTnn%s", suf);
printf(" at %s MHz: ", strmhz(buf, clock));
print_size(checkicache(), " I-Cache ");
print_size(checkdcache(), " D-Cache");
/* lets check and see if we're running on a 860T (or P?) */
immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
puts (" FEC present");
}
if (!m) {
puts (cpu_warning);
}
putc ('\n');
return 0;
}
#elif defined(CONFIG_MPC850)
static int check_CPU (long clock, uint pvr, uint immr)
{
volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
uint k, m;
char buf[32];
/* the highest 16 bits should be 0x0050 for a 8xx */
if ((pvr >> 16) != 0x0050)
return -1;
k = (immr << 16) |
immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
switch (k) {
case 0x20020001:
printf ("XPC850xxZT");
break;
case 0x21000065:
printf ("XPC850xxZTA");
break;
case 0x21010067:
printf ("XPC850xxZTB");
m = 1;
break;
case 0x21020068:
printf ("XPC850xxZTC");
m = 1;
break;
default:
printf ("unknown MPC850 (0x%08x)", k);
}
printf(" at %s MHz: ", strmhz(buf, clock));
print_size(checkicache(), " I-Cache ");
print_size(checkdcache(), " D-Cache");
/* lets check and see if we're running on a 850T (or P?) */
immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
printf (" FEC present");
}
if (!m) {
puts (cpu_warning);
}
putc ('\n');
return 0;
}
#else
#error CPU undefined
#endif
/* ------------------------------------------------------------------------- */
int checkcpu (void)
{
ulong clock = gd->cpu_clk;
uint immr = get_immr (0); /* Return full IMMR contents */
uint pvr = get_pvr ();
puts ("CPU: ");
/* 850 has PARTNUM 20 */
/* 801 has PARTNUM 10 */
return check_CPU (clock, pvr, immr);
}
/* ------------------------------------------------------------------------- */
/* L1 i-cache */
/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB) */
int checkicache (void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
u32 cacheon = rd_ic_cst () & IDC_ENABLED;
#ifdef CONFIG_IP86x
u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
#else
u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
#endif
u32 m;
u32 lines = -1;
wr_ic_cst (IDC_UNALL);
wr_ic_cst (IDC_INVALL);
wr_ic_cst (IDC_DISABLE);
__asm__ volatile ("isync");
while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
wr_ic_adr (k);
wr_ic_cst (IDC_LDLCK);
__asm__ volatile ("isync");
lines++;
k += 0x10; /* the number of bytes in a cacheline */
}
wr_ic_cst (IDC_UNALL);
wr_ic_cst (IDC_INVALL);
if (cacheon)
wr_ic_cst (IDC_ENABLE);
else
wr_ic_cst (IDC_DISABLE);
__asm__ volatile ("isync");
return lines << 4;
};
/* ------------------------------------------------------------------------- */
/* L1 d-cache */
/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB) */
/* call with cache disabled */
int checkdcache (void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
u32 cacheon = rd_dc_cst () & IDC_ENABLED;
#ifdef CONFIG_IP86x
u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
#else
u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
#endif
u32 m;
u32 lines = -1;
wr_dc_cst (IDC_UNALL);
wr_dc_cst (IDC_INVALL);
wr_dc_cst (IDC_DISABLE);
while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
wr_dc_adr (k);
wr_dc_cst (IDC_LDLCK);
lines++;
k += 0x10; /* the number of bytes in a cacheline */
}
wr_dc_cst (IDC_UNALL);
wr_dc_cst (IDC_INVALL);
if (cacheon)
wr_dc_cst (IDC_ENABLE);
else
wr_dc_cst (IDC_DISABLE);
return lines << 4;
};
/* ------------------------------------------------------------------------- */
void upmconfig (uint upm, uint * table, uint size)
{
uint i;
uint addr = 0;
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
for (i = 0; i < size; i++) {
memctl->memc_mdr = table[i]; /* (16-15) */
memctl->memc_mcr = addr | upm; /* (16-16) */
addr++;
}
}
/* ------------------------------------------------------------------------- */
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong msr, addr;
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
immap->im_clkrst.car_plprcr |= PLPRCR_CSR; /* Checkstop Reset enable */
/* Interrupts and MMU off */
__asm__ volatile ("mtspr 81, 0");
__asm__ volatile ("mfmsr %0":"=r" (msr));
msr &= ~0x1030;
__asm__ volatile ("mtmsr %0"::"r" (msr));
/*
* Trying to execute the next instruction at a non-existing address
* should cause a machine check, resulting in reset
*/
#ifdef CONFIG_SYS_RESET_ADDRESS
addr = CONFIG_SYS_RESET_ADDRESS;
#else
/*
* note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
* - sizeof (ulong) is usually a valid address. Better pick an address
* known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
* "(ulong)-1" used to be a good choice for many systems...
*/
addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
#endif
((void (*)(void)) addr) ();
return 1;
}
/* ------------------------------------------------------------------------- */
/*
* Get timebase clock frequency (like cpu_clk in Hz)
*
* See sections 14.2 and 14.6 of the User's Manual
*/
unsigned long get_tbclk (void)
{
uint immr = get_immr (0); /* Return full IMMR contents */
volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
ulong oscclk, factor, pll;
if (immap->im_clkrst.car_sccr & SCCR_TBS) {
return (gd->cpu_clk / 16);
}
pll = immap->im_clkrst.car_plprcr;
#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
/*
* For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
* factor is calculated as follows:
*
* MFN
* MFI + -------
* MFD + 1
* factor = -----------------
* (PDF + 1) * 2^S
*
* For older chips, it's just MF field of PLPRCR plus one.
*/
if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
(PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
} else {
factor = PLPRCR_val(MF)+1;
}
oscclk = gd->cpu_clk / factor;
if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
return (oscclk / 4);
}
return (oscclk / 16);
}
/* ------------------------------------------------------------------------- */
#if defined(CONFIG_WATCHDOG)
void watchdog_reset (void)
{
int re_enable = disable_interrupts ();
reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
if (re_enable)
enable_interrupts ();
}
#endif /* CONFIG_WATCHDOG */
#if defined(CONFIG_WATCHDOG)
void reset_8xx_watchdog (volatile immap_t * immr)
{
/*
* All other boards use the MPC8xx Internal Watchdog
*/
immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */
immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
}
#endif /* CONFIG_WATCHDOG */
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int cpu_eth_init(bd_t *bis)
{
#if defined(SCC_ENET) && defined(CONFIG_CMD_NET)
scc_initialize(bis);
#endif
#if defined(FEC_ENET)
fec_initialize(bis);
#endif
return 0;
}

218
arch/powerpc/cpu/mpc8xx/cpu_init.c
View File

@ -1,218 +0,0 @@
/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <watchdog.h>
#include <mpc8xx.h>
#include <commproc.h>
#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
DECLARE_GLOBAL_DATA_PTR;
#endif
#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
defined(CONFIG_SYS_SMC_UCODE_PATCH)
void cpm_load_patch (volatile immap_t * immr);
#endif
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f (volatile immap_t * immr)
{
volatile memctl8xx_t *memctl = &immr->im_memctl;
# ifdef CONFIG_SYS_PLPRCR
ulong mfmask;
# endif
ulong reg;
/* SYPCR - contains watchdog control (11-9) */
immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
#if defined(CONFIG_WATCHDOG)
reset_8xx_watchdog (immr);
#endif /* CONFIG_WATCHDOG */
/* SIUMCR - contains debug pin configuration (11-6) */
immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
/* initialize timebase status and control register (11-26) */
/* unlock TBSCRK */
immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
/* initialize the PIT (11-31) */
immr->im_sitk.sitk_piscrk = KAPWR_KEY;
immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
/* System integration timers. Don't change EBDF! (15-27) */
immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
reg = immr->im_clkrst.car_sccr;
reg &= SCCR_MASK;
reg |= CONFIG_SYS_SCCR;
immr->im_clkrst.car_sccr = reg;
/* PLL (CPU clock) settings (15-30) */
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
* set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
* otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
* field value.
*
* For newer (starting MPC866) chips PLPRCR layout is different.
*/
#ifdef CONFIG_SYS_PLPRCR
if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
mfmask = PLPRCR_MFACT_MSK;
else
mfmask = PLPRCR_MF_MSK;
if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
reg = CONFIG_SYS_PLPRCR; /* reset control bits */
else {
reg = immr->im_clkrst.car_plprcr;
reg &= mfmask; /* isolate MF-related fields */
reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
}
immr->im_clkrst.car_plprcr = reg;
#endif
/*
* Memory Controller:
*/
/* perform BR0 reset that MPC850 Rev. A can't guarantee */
reg = memctl->memc_br0;
reg &= BR_PS_MSK; /* Clear everything except Port Size bits */
reg |= BR_V; /* then add just the "Bank Valid" bit */
memctl->memc_br0 = reg;
/* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
* preliminary addresses - these have to be modified later
* when FLASH size has been determined
*
* Depending on the size of the memory region defined by
* CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
* CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
* map CONFIG_SYS_MONITOR_BASE.
*
* For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
* 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
*
* If BR0 wasn't loaded with address base 0xff000000, then BR0's
* base address remains as 0x00000000. However, the address mask
* have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
* into the Bank0.
*
* This is why CONFIG_IVMS8 and similar boards must load BR0 with
* CONFIG_SYS_BR0_PRELIM in advance.
*
* [Thanks to Michael Liao for this explanation.
* I owe him a free beer. - wd]
*/
#if defined(CONFIG_SYS_OR0_REMAP)
memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
#endif
#if defined(CONFIG_SYS_OR1_REMAP)
memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
#endif
#if defined(CONFIG_SYS_OR5_REMAP)
memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
#endif
/* now restrict to preliminary range */
memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
#endif
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
#endif
#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
#endif
#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
#endif
#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
#endif
#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
#endif
#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
#endif
/*
* Reset CPM
*/
immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG;
do { /* Spin until command processed */
__asm__ ("eieio");
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
#ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */
/* write config value */
immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
#endif
#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
defined(CONFIG_SYS_SMC_UCODE_PATCH)
cpm_load_patch (immr); /* load mpc8xx microcode patch */
#endif
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r (void)
{
#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
bd_t *bd = gd->bd;
volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
#endif
#ifdef CONFIG_SYS_RTCSC
/* Unlock RTSC register */
immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
/* write config value */
immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
#endif
#ifdef CONFIG_SYS_RMDS
/* write config value */
immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
#endif
return (0);
}

27
arch/powerpc/cpu/mpc8xx/fdt.c
View File

@ -1,27 +0,0 @@
/*
* Copyright 2008 (C) Bryan O'Donoghue
*
* Code copied & edited from Freescale mpc85xx stuff.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
void ft_cpu_setup(void *blob, bd_t *bd)
{
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"timebase-frequency", get_tbclk(), 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"clock-frequency", bd->bi_intfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
gd->arch.brg_clk, 1);
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}

933
arch/powerpc/cpu/mpc8xx/fec.c
View File

@ -1,933 +0,0 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <commproc.h>
#include <malloc.h>
#include <net.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
#undef ET_DEBUG
#if defined(CONFIG_CMD_NET) && \
(defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2))
/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */
#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2)
#define CONFIG_ETHER_ON_FEC1 1
#endif
/* define WANT_MII when MII support is required */
#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
#define WANT_MII
#else
#undef WANT_MII
#endif
#if defined(WANT_MII)
#include <miiphy.h>
#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
#error "CONFIG_MII has to be defined!"
#endif
#endif
#if defined(CONFIG_RMII) && !defined(WANT_MII)
#error RMII support is unusable without a working PHY.
#endif
#ifdef CONFIG_SYS_DISCOVER_PHY
static int mii_discover_phy(struct eth_device *dev);
#endif
int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg);
int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
u16 value);
static struct ether_fcc_info_s
{
int ether_index;
int fecp_offset;
int phy_addr;
int actual_phy_addr;
int initialized;
}
ether_fcc_info[] = {
#if defined(CONFIG_ETHER_ON_FEC1)
{
0,
offsetof(immap_t, im_cpm.cp_fec1),
#if defined(CONFIG_FEC1_PHY)
CONFIG_FEC1_PHY,
#else
-1, /* discover */
#endif
-1,
0,
},
#endif
#if defined(CONFIG_ETHER_ON_FEC2)
{
1,
offsetof(immap_t, im_cpm.cp_fec2),
#if defined(CONFIG_FEC2_PHY)
CONFIG_FEC2_PHY,
#else
-1,
#endif
-1,
0,
},
#endif
};
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
#define TX_BUF_CNT 2
#define TOUT_LOOP 100
#define PKT_MAXBUF_SIZE 1518
#define PKT_MINBUF_SIZE 64
#define PKT_MAXBLR_SIZE 1520
#ifdef __GNUC__
static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8)));
#else
#error txbuf must be aligned.
#endif
static uint rxIdx; /* index of the current RX buffer */
static uint txIdx; /* index of the current TX buffer */
/*
* FEC Ethernet Tx and Rx buffer descriptors allocated at the
* immr->udata_bd address on Dual-Port RAM
* Provide for Double Buffering
*/
typedef volatile struct CommonBufferDescriptor {
cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
} RTXBD;
static RTXBD *rtx = NULL;
static int fec_send(struct eth_device *dev, void *packet, int length);
static int fec_recv(struct eth_device* dev);
static int fec_init(struct eth_device* dev, bd_t * bd);
static void fec_halt(struct eth_device* dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
static void __mii_init(void);
#endif
int fec_initialize(bd_t *bis)
{
struct eth_device* dev;
struct ether_fcc_info_s *efis;
int i;
for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) {
dev = malloc(sizeof(*dev));
if (dev == NULL)
hang();
memset(dev, 0, sizeof(*dev));
/* for FEC1 make sure that the name of the interface is the same
as the old one for compatibility reasons */
if (i == 0) {
strcpy(dev->name, "FEC");
} else {
sprintf (dev->name, "FEC%d",
ether_fcc_info[i].ether_index + 1);
}
efis = &ether_fcc_info[i];
/*
* reset actual phy addr
*/
efis->actual_phy_addr = -1;
dev->priv = efis;
dev->init = fec_init;
dev->halt = fec_halt;
dev->send = fec_send;
dev->recv = fec_recv;
eth_register(dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
int retval;
struct mii_dev *mdiodev = mdio_alloc();
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
mdiodev->read = fec8xx_miiphy_read;
mdiodev->write = fec8xx_miiphy_write;
retval = mdio_register(mdiodev);
if (retval < 0)
return retval;
#endif
}
return 1;
}
static int fec_send(struct eth_device *dev, void *packet, int length)
{
int j, rc;
struct ether_fcc_info_s *efis = dev->priv;
volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
/* section 16.9.23.3
* Wait for ready
*/
j = 0;
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
udelay(1);
j++;
}
if (j>=TOUT_LOOP) {
printf("TX not ready\n");
}
rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
rtx->txbd[txIdx].cbd_datlen = length;
rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
__asm__ ("eieio");
/* Activate transmit Buffer Descriptor polling */
fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
j = 0;
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
udelay(1);
j++;
}
if (j>=TOUT_LOOP) {
printf("TX timeout\n");
}
#ifdef ET_DEBUG
printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
__FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
(rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
#endif
/* return only status bits */;
rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
txIdx = (txIdx + 1) % TX_BUF_CNT;
return rc;
}
static int fec_recv (struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
volatile fec_t *fecp =
(volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
int length;
for (;;) {
/* section 16.9.23.2 */
if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
length = -1;
break; /* nothing received - leave for() loop */
}
length = rtx->rxbd[rxIdx].cbd_datlen;
if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
#ifdef ET_DEBUG
printf ("%s[%d] err: %x\n",
__FUNCTION__, __LINE__,
rtx->rxbd[rxIdx].cbd_sc);
#endif
} else {
uchar *rx = net_rx_packets[rxIdx];
length -= 4;
#if defined(CONFIG_CMD_CDP)
if ((rx[0] & 1) != 0 &&
memcmp((uchar *)rx, net_bcast_ethaddr, 6) != 0 &&
!is_cdp_packet((uchar *)rx))
rx = NULL;
#endif
/*
* Pass the packet up to the protocol layers.
*/
if (rx != NULL)
net_process_received_packet(rx, length);
}
/* Give the buffer back to the FEC. */
rtx->rxbd[rxIdx].cbd_datlen = 0;
/* wrap around buffer index when necessary */
if ((rxIdx + 1) >= PKTBUFSRX) {
rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
rxIdx = 0;
} else {
rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
rxIdx++;
}
__asm__ ("eieio");
/* Try to fill Buffer Descriptors */
fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
}
return length;
}
/**************************************************************
*
* FEC Ethernet Initialization Routine
*
*************************************************************/
#define FEC_ECNTRL_PINMUX 0x00000004
#define FEC_ECNTRL_ETHER_EN 0x00000002
#define FEC_ECNTRL_RESET 0x00000001
#define FEC_RCNTRL_BC_REJ 0x00000010
#define FEC_RCNTRL_PROM 0x00000008
#define FEC_RCNTRL_MII_MODE 0x00000004
#define FEC_RCNTRL_DRT 0x00000002
#define FEC_RCNTRL_LOOP 0x00000001
#define FEC_TCNTRL_FDEN 0x00000004
#define FEC_TCNTRL_HBC 0x00000002
#define FEC_TCNTRL_GTS 0x00000001
#define FEC_RESET_DELAY 50
#if defined(CONFIG_RMII)
static inline void fec_10Mbps(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
int fecidx = efis->ether_index;
uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
if ((unsigned int)fecidx >= 2)
hang();
((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |= mask;
}
static inline void fec_100Mbps(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
int fecidx = efis->ether_index;
uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
if ((unsigned int)fecidx >= 2)
hang();
((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask;
}
#endif
static inline void fec_full_duplex(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT;
fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */
}
static inline void fec_half_duplex(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
fecp->fec_r_cntrl |= FEC_RCNTRL_DRT;
fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */
}
static void fec_pin_init(int fecidx)
{
bd_t *bd = gd->bd;
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/*
* Set MII speed to 2.5 MHz or slightly below.
*
* According to the MPC860T (Rev. D) Fast ethernet controller user
* manual (6.2.14),
* the MII management interface clock must be less than or equal
* to 2.5 MHz.
* This MDC frequency is equal to system clock / (2 * MII_SPEED).
* Then MII_SPEED = system_clock / 2 * 2,5 MHz.
*
* All MII configuration is done via FEC1 registers:
*/
immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
/* use MDC for MII */
immr->im_ioport.iop_pdpar |= 0x0080;
immr->im_ioport.iop_pddir &= ~0x0080;
#endif
if (fecidx == 0) {
#if defined(CONFIG_ETHER_ON_FEC1)
#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
#if !defined(CONFIG_RMII)
immr->im_ioport.iop_papar |= 0xf830;
immr->im_ioport.iop_padir |= 0x0830;
immr->im_ioport.iop_padir &= ~0xf000;
immr->im_cpm.cp_pbpar |= 0x00001001;
immr->im_cpm.cp_pbdir &= ~0x00001001;
immr->im_ioport.iop_pcpar |= 0x000c;
immr->im_ioport.iop_pcdir &= ~0x000c;
immr->im_cpm.cp_pepar |= 0x00000003;
immr->im_cpm.cp_pedir |= 0x00000003;
immr->im_cpm.cp_peso &= ~0x00000003;
immr->im_cpm.cp_cptr &= ~0x00000100;
#else
#if !defined(CONFIG_FEC1_PHY_NORXERR)
immr->im_ioport.iop_papar |= 0x1000;
immr->im_ioport.iop_padir &= ~0x1000;
#endif
immr->im_ioport.iop_papar |= 0xe810;
immr->im_ioport.iop_padir |= 0x0810;
immr->im_ioport.iop_padir &= ~0xe000;
immr->im_cpm.cp_pbpar |= 0x00000001;
immr->im_cpm.cp_pbdir &= ~0x00000001;
immr->im_cpm.cp_cptr |= 0x00000100;
immr->im_cpm.cp_cptr &= ~0x00000050;
#endif /* !CONFIG_RMII */
#else
/*
* Configure all of port D for MII.
*/
immr->im_ioport.iop_pdpar = 0x1fff;
/*
* Bits moved from Rev. D onward
*/
if ((get_immr(0) & 0xffff) < 0x0501)
immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
else
immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
#endif
#endif /* CONFIG_ETHER_ON_FEC1 */
} else if (fecidx == 1) {
#if defined(CONFIG_ETHER_ON_FEC2)
#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
#if !defined(CONFIG_RMII)
immr->im_cpm.cp_pepar |= 0x0003fffc;
immr->im_cpm.cp_pedir |= 0x0003fffc;
immr->im_cpm.cp_peso &= ~0x000087fc;
immr->im_cpm.cp_peso |= 0x00037800;
immr->im_cpm.cp_cptr &= ~0x00000080;
#else
#if !defined(CONFIG_FEC2_PHY_NORXERR)
immr->im_cpm.cp_pepar |= 0x00000010;
immr->im_cpm.cp_pedir |= 0x00000010;
immr->im_cpm.cp_peso &= ~0x00000010;
#endif
immr->im_cpm.cp_pepar |= 0x00039620;
immr->im_cpm.cp_pedir |= 0x00039620;
immr->im_cpm.cp_peso |= 0x00031000;
immr->im_cpm.cp_peso &= ~0x00008620;
immr->im_cpm.cp_cptr |= 0x00000080;
immr->im_cpm.cp_cptr &= ~0x00000028;
#endif /* CONFIG_RMII */
#endif /* CONFIG_MPC885_FAMILY */
#endif /* CONFIG_ETHER_ON_FEC2 */
}
}
static int fec_reset(volatile fec_t *fecp)
{
int i;
/* Whack a reset.
* A delay is required between a reset of the FEC block and
* initialization of other FEC registers because the reset takes
* some time to complete. If you don't delay, subsequent writes
* to FEC registers might get killed by the reset routine which is
* still in progress.
*/
fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
for (i = 0;
(fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
++i) {
udelay (1);
}
if (i == FEC_RESET_DELAY)
return -1;
return 0;
}
static int fec_init (struct eth_device *dev, bd_t * bd)
{
struct ether_fcc_info_s *efis = dev->priv;
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile fec_t *fecp =
(volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
int i;
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
/* the MII interface is connected to FEC1
* so for the miiphy_xxx function to work we must
* call mii_init since fec_halt messes the thing up
*/
if (efis->ether_index != 0)
__mii_init();
#endif
if (fec_reset(fecp) < 0)
printf ("FEC_RESET_DELAY timeout\n");
/* We use strictly polling mode only
*/
fecp->fec_imask = 0;
/* Clear any pending interrupt
*/
fecp->fec_ievent = 0xffc0;
/* No need to set the IVEC register */
/* Set station address
*/
#define ea dev->enetaddr
fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
fecp->fec_addr_high = (ea[4] << 8) | (ea[5]);
#undef ea
#if defined(CONFIG_CMD_CDP)
/*
* Turn on multicast address hash table
*/
fecp->fec_hash_table_high = 0xffffffff;
fecp->fec_hash_table_low = 0xffffffff;
#else
/* Clear multicast address hash table
*/
fecp->fec_hash_table_high = 0;
fecp->fec_hash_table_low = 0;
#endif
/* Set maximum receive buffer size.
*/
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
/* Set maximum frame length
*/
fecp->fec_r_hash = PKT_MAXBUF_SIZE;
/*
* Setup Buffers and Buffer Desriptors
*/
rxIdx = 0;
txIdx = 0;
if (!rtx)
rtx = (RTXBD *)(immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
/*
* Setup Receiver Buffer Descriptors (13.14.24.18)
* Settings:
* Empty, Wrap
*/
for (i = 0; i < PKTBUFSRX; i++) {
rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
rtx->rxbd[i].cbd_datlen = 0; /* Reset */
rtx->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
}
rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
/*
* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
* Settings:
* Last, Tx CRC
*/
for (i = 0; i < TX_BUF_CNT; i++) {
rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
rtx->txbd[i].cbd_datlen = 0; /* Reset */
rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
}
rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
/* Set receive and transmit descriptor base
*/
fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
/* Enable MII mode
*/
#if 0 /* Full duplex mode */
fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
#else /* Half duplex mode */
fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
fecp->fec_x_cntrl = 0;
#endif
/* Enable big endian and don't care about SDMA FC.
*/
fecp->fec_fun_code = 0x78000000;
/*
* Setup the pin configuration of the FEC
*/
fec_pin_init (efis->ether_index);
rxIdx = 0;
txIdx = 0;
/*
* Now enable the transmit and receive processing
*/
fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
if (efis->phy_addr == -1) {
#ifdef CONFIG_SYS_DISCOVER_PHY
/*
* wait for the PHY to wake up after reset
*/
efis->actual_phy_addr = mii_discover_phy (dev);
if (efis->actual_phy_addr == -1) {
printf ("Unable to discover phy!\n");
return -1;
}
#else
efis->actual_phy_addr = -1;
#endif
} else {
efis->actual_phy_addr = efis->phy_addr;
}
#if defined(CONFIG_MII) && defined(CONFIG_RMII)
/*
* adapt the RMII speed to the speed of the phy
*/
if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) {
fec_100Mbps (dev);
} else {
fec_10Mbps (dev);
}
#endif
#if defined(CONFIG_MII)
/*
* adapt to the half/full speed settings
*/
if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) {
fec_full_duplex (dev);
} else {
fec_half_duplex (dev);
}
#endif
/* And last, try to fill Rx Buffer Descriptors */
fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
efis->initialized = 1;
return 0;
}
static void fec_halt(struct eth_device* dev)
{
struct ether_fcc_info_s *efis = dev->priv;
volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
int i;
/* avoid halt if initialized; mii gets stuck otherwise */
if (!efis->initialized)
return;
/* Whack a reset.
* A delay is required between a reset of the FEC block and
* initialization of other FEC registers because the reset takes
* some time to complete. If you don't delay, subsequent writes
* to FEC registers might get killed by the reset routine which is
* still in progress.
*/
fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
for (i = 0;
(fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
++i) {
udelay (1);
}
if (i == FEC_RESET_DELAY) {
printf ("FEC_RESET_DELAY timeout\n");
return;
}
efis->initialized = 0;
}
#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
/* Make MII read/write commands for the FEC.
*/
#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
(REG & 0x1f) << 18))
#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
(REG & 0x1f) << 18) | \
(VAL & 0xffff))
/* Interrupt events/masks.
*/
#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
/* PHY identification
*/
#define PHY_ID_LXT970 0x78100000 /* LXT970 */
#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
#define PHY_ID_QS6612 0x01814400 /* QS6612 */
#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */
#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */
/* send command to phy using mii, wait for result */
static uint
mii_send(uint mii_cmd)
{
uint mii_reply;
volatile fec_t *ep;
int cnt;
ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec);
ep->fec_mii_data = mii_cmd; /* command to phy */
/* wait for mii complete */
cnt = 0;
while (!(ep->fec_ievent & FEC_ENET_MII)) {
if (++cnt > 1000) {
printf("mii_send STUCK!\n");
break;
}
}
mii_reply = ep->fec_mii_data; /* result from phy */
ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
#if 0
printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
__FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
#endif
return (mii_reply & 0xffff); /* data read from phy */
}
#endif
#if defined(CONFIG_SYS_DISCOVER_PHY)
static int mii_discover_phy(struct eth_device *dev)
{
#define MAX_PHY_PASSES 11
uint phyno;
int pass;
uint phytype;
int phyaddr;
phyaddr = -1; /* didn't find a PHY yet */
for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
if (pass > 1) {
/* PHY may need more time to recover from reset.
* The LXT970 needs 50ms typical, no maximum is
* specified, so wait 10ms before try again.
* With 11 passes this gives it 100ms to wake up.
*/
udelay(10000); /* wait 10ms */
}
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
phytype = mii_send(mk_mii_read(phyno, MII_PHYSID2));
#ifdef ET_DEBUG
printf("PHY type 0x%x pass %d type ", phytype, pass);
#endif
if (phytype != 0xffff) {
phyaddr = phyno;
phytype |= mii_send(mk_mii_read(phyno,
MII_PHYSID1)) << 16;
#ifdef ET_DEBUG
printf("PHY @ 0x%x pass %d type ",phyno,pass);
switch (phytype & 0xfffffff0) {
case PHY_ID_LXT970:
printf("LXT970\n");
break;
case PHY_ID_LXT971:
printf("LXT971\n");
break;
case PHY_ID_82555:
printf("82555\n");
break;
case PHY_ID_QS6612:
printf("QS6612\n");
break;
case PHY_ID_AMD79C784:
printf("AMD79C784\n");
break;
case PHY_ID_LSI80225B:
printf("LSI L80225/B\n");
break;
case PHY_ID_DM9161:
printf("Davicom DM9161\n");
break;
case PHY_ID_KSM8995M:
printf("MICREL KS8995M\n");
break;
default:
printf("0x%08x\n", phytype);
break;
}
#endif
}
}
}
if (phyaddr < 0) {
printf("No PHY device found.\n");
}
return phyaddr;
}
#endif /* CONFIG_SYS_DISCOVER_PHY */
#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
/****************************************************************************
* mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
* This function is a subset of eth_init
****************************************************************************
*/
static void __mii_init(void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
if (fec_reset(fecp) < 0)
printf ("FEC_RESET_DELAY timeout\n");
/* We use strictly polling mode only
*/
fecp->fec_imask = 0;
/* Clear any pending interrupt
*/
fecp->fec_ievent = 0xffc0;
/* Now enable the transmit and receive processing
*/
fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
}
void mii_init (void)
{
int i;
__mii_init();
/* Setup the pin configuration of the FEC(s)
*/
for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++)
fec_pin_init(ether_fcc_info[i].ether_index);
}
/*****************************************************************************
* Read and write a MII PHY register, routines used by MII Utilities
*
* FIXME: These routines are expected to return 0 on success, but mii_send
* does _not_ return an error code. Maybe 0xFFFF means error, i.e.
* no PHY connected...
* For now always return 0.
* FIXME: These routines only work after calling eth_init() at least once!
* Otherwise they hang in mii_send() !!! Sorry!
*****************************************************************************/
int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
{
unsigned short value = 0;
short rdreg; /* register working value */
#ifdef MII_DEBUG
printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
#endif
rdreg = mii_send(mk_mii_read(addr, reg));
value = rdreg;
#ifdef MII_DEBUG
printf ("0x%04x\n", value);
#endif
return value;
}
int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
u16 value)
{
#ifdef MII_DEBUG
printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
#endif
(void)mii_send(mk_mii_write(addr, reg, value));
#ifdef MII_DEBUG
printf ("0x%04x\n", value);
#endif
return 0;
}
#endif
#endif

12
arch/powerpc/cpu/mpc8xx/fec.h
View File

@ -1,12 +0,0 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _FEC_H_
#define _FEC_H_
#endif /* _FEC_H_ */

278
arch/powerpc/cpu/mpc8xx/interrupts.c
View File

@ -1,278 +0,0 @@
/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8xx.h>
#include <mpc8xx_irq.h>
#include <asm/processor.h>
#include <commproc.h>
/************************************************************************/
/*
* CPM interrupt vector functions.
*/
struct interrupt_action {
interrupt_handler_t *handler;
void *arg;
};
static struct interrupt_action cpm_vecs[CPMVEC_NR];
static struct interrupt_action irq_vecs[NR_IRQS];
static void cpm_interrupt_init (void);
static void cpm_interrupt (void *regs);
/************************************************************************/
int interrupt_init_cpu (unsigned *decrementer_count)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
/* disable all interrupts */
immr->im_siu_conf.sc_simask = 0;
/* Configure CPM interrupts */
cpm_interrupt_init ();
return (0);
}
/************************************************************************/
/*
* Handle external interrupts
*/
void external_interrupt (struct pt_regs *regs)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
int irq;
ulong simask, newmask;
ulong vec, v_bit;
/*
* read the SIVEC register and shift the bits down
* to get the irq number
*/
vec = immr->im_siu_conf.sc_sivec;
irq = vec >> 26;
v_bit = 0x80000000UL >> irq;
/*
* Read Interrupt Mask Register and Mask Interrupts
*/
simask = immr->im_siu_conf.sc_simask;
newmask = simask & (~(0xFFFF0000 >> irq));
immr->im_siu_conf.sc_simask = newmask;
if (!(irq & 0x1)) { /* External Interrupt ? */
ulong siel;
/*
* Read Interrupt Edge/Level Register
*/
siel = immr->im_siu_conf.sc_siel;
if (siel & v_bit) { /* edge triggered interrupt ? */
/*
* Rewrite SIPEND Register to clear interrupt
*/
immr->im_siu_conf.sc_sipend = v_bit;
}
}
if (irq_vecs[irq].handler != NULL) {
irq_vecs[irq].handler (irq_vecs[irq].arg);
} else {
printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
irq, vec);
/* turn off the bogus interrupt to avoid it from now */
simask &= ~v_bit;
}
/*
* Re-Enable old Interrupt Mask
*/
immr->im_siu_conf.sc_simask = simask;
}
/************************************************************************/
/*
* CPM interrupt handler
*/
static void cpm_interrupt (void *regs)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
uint vec;
/*
* Get the vector by setting the ACK bit
* and then reading the register.
*/
immr->im_cpic.cpic_civr = 1;
vec = immr->im_cpic.cpic_civr;
vec >>= 11;
if (cpm_vecs[vec].handler != NULL) {
(*cpm_vecs[vec].handler) (cpm_vecs[vec].arg);
} else {
immr->im_cpic.cpic_cimr &= ~(1 << vec);
printf ("Masking bogus CPM interrupt vector 0x%x\n", vec);
}
/*
* After servicing the interrupt,
* we have to remove the status indicator.
*/
immr->im_cpic.cpic_cisr |= (1 << vec);
}
/*
* The CPM can generate the error interrupt when there is a race
* condition between generating and masking interrupts. All we have
* to do is ACK it and return. This is a no-op function so we don't
* need any special tests in the interrupt handler.
*/
static void cpm_error_interrupt (void *dummy)
{
}
/************************************************************************/
/*
* Install and free an interrupt handler
*/
void irq_install_handler (int vec, interrupt_handler_t * handler,
void *arg)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
if ((vec & CPMVEC_OFFSET) != 0) {
/* CPM interrupt */
vec &= 0xffff;
if (cpm_vecs[vec].handler != NULL) {
printf ("CPM interrupt 0x%x replacing 0x%x\n",
(uint) handler,
(uint) cpm_vecs[vec].handler);
}
cpm_vecs[vec].handler = handler;
cpm_vecs[vec].arg = arg;
immr->im_cpic.cpic_cimr |= (1 << vec);
#if 0
printf ("Install CPM interrupt for vector %d ==> %p\n",
vec, handler);
#endif
} else {
/* SIU interrupt */
if (irq_vecs[vec].handler != NULL) {
printf ("SIU interrupt %d 0x%x replacing 0x%x\n",
vec,
(uint) handler,
(uint) cpm_vecs[vec].handler);
}
irq_vecs[vec].handler = handler;
irq_vecs[vec].arg = arg;
immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
#if 0
printf ("Install SIU interrupt for vector %d ==> %p\n",
vec, handler);
#endif
}
}
void irq_free_handler (int vec)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
if ((vec & CPMVEC_OFFSET) != 0) {
/* CPM interrupt */
vec &= 0xffff;
#if 0
printf ("Free CPM interrupt for vector %d ==> %p\n",
vec, cpm_vecs[vec].handler);
#endif
immr->im_cpic.cpic_cimr &= ~(1 << vec);
cpm_vecs[vec].handler = NULL;
cpm_vecs[vec].arg = NULL;
} else {
/* SIU interrupt */
#if 0
printf ("Free CPM interrupt for vector %d ==> %p\n",
vec, cpm_vecs[vec].handler);
#endif
immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
irq_vecs[vec].handler = NULL;
irq_vecs[vec].arg = NULL;
}
}
/************************************************************************/
static void cpm_interrupt_init (void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/*
* Initialize the CPM interrupt controller.
*/
immr->im_cpic.cpic_cicr =
(CICR_SCD_SCC4 |
CICR_SCC_SCC3 |
CICR_SCB_SCC2 |
CICR_SCA_SCC1) | ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK;
immr->im_cpic.cpic_cimr = 0;
/*
* Install the error handler.
*/
irq_install_handler (CPMVEC_ERROR, cpm_error_interrupt, NULL);
immr->im_cpic.cpic_cicr |= CICR_IEN;
/*
* Install the cpm interrupt handler
*/
irq_install_handler (CPM_INTERRUPT, cpm_interrupt, NULL);
}
/************************************************************************/
/*
* timer_interrupt - gets called when the decrementer overflows,
* with interrupts disabled.
* Trivial implementation - no need to be really accurate.
*/
void timer_interrupt_cpu (struct pt_regs *regs)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
#if 0
printf ("*** Timer Interrupt *** ");
#endif
/* Reset Timer Expired and Timers Interrupt Status */
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
__asm__ ("nop");
/*
Clear TEXPS (and TMIST on older chips). SPLSS (on older
chips) is cleared too.
Bitwise OR is a read-modify-write operation so ALL bits
which are cleared by writing `1' would be cleared by
operations like
immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
The same can be achieved by simple writing of the PLPRCR
to itself. If a bit value should be preserved, read the
register, ZERO the bit and write, not OR, the result back.
*/
immr->im_clkrst.car_plprcr = immr->im_clkrst.car_plprcr;
}
/************************************************************************/

54
arch/powerpc/cpu/mpc8xx/kgdb.S
View File

@ -1,54 +0,0 @@
/*
* Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <command.h>
#include <mpc8xx.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#if defined(CONFIG_CMD_KGDB)
/*
* cache flushing routines for kgdb
*/
.globl kgdb_flush_cache_all
kgdb_flush_cache_all:
lis r3, IDC_INVALL@h
mtspr DC_CST, r3
sync
lis r3, IDC_INVALL@h
mtspr IC_CST, r3
SYNC
blr
.globl kgdb_flush_cache_range
kgdb_flush_cache_range:
li r5,CONFIG_SYS_CACHELINE_SIZE-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
beqlr
mtctr r4
mr r6,r3
1: dcbst 0,r3
addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
bdnz 1b
sync /* wait for dcbst's to get to ram */
mtctr r4
2: icbi 0,r6
addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
bdnz 2b
SYNC
blr
#endif

119
arch/powerpc/cpu/mpc8xx/plprcr_write.S
View File

@ -1,119 +0,0 @@
/*
* (C) Copyright 2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <mpc8xx.h>
#include <ppc_asm.tmpl>
#include <asm/cache.h>
#define CACHE_CMD_ENABLE 0x02000000
#define CACHE_CMD_DISABLE 0x04000000
#define CACHE_CMD_LOAD_LOCK 0x06000000
#define CACHE_CMD_UNLOCK_LINE 0x08000000
#define CACHE_CMD_UNLOCK_ALL 0x0A000000
#define CACHE_CMD_INVALIDATE 0x0C000000
#define SPEED_PLPRCR_WAIT_5CYC 150
#define _CACHE_ALIGN_SIZE 16
.text
.align 2
.globl plprcr_write_866
/*
* void plprcr_write_866 (long plprcr)
* Write PLPRCR, including workaround for device errata SIU4 and SIU9.
*/
plprcr_write_866:
mfspr r10, LR /* save the Link Register value */
/* turn instruction cache on (no MMU required for instructions)
*/
lis r4, CACHE_CMD_ENABLE@h
ori r4, r4, CACHE_CMD_ENABLE@l
mtspr IC_CST, r4
isync
/* clear IC_CST error bits
*/
mfspr r4, IC_CST
bl plprcr_here
plprcr_here:
mflr r5
/* calculate relocation offset
*/
lis r4, plprcr_here@h
ori r4, r4, plprcr_here@l
sub r5, r5, r4
/* calculate first address of this function
*/
lis r6, plprcr_write_866@h
ori r6, r6, plprcr_write_866@l
add r6, r6, r5
/* calculate end address of this function
*/
lis r7, plprcr_end@h
ori r7, r7, plprcr_end@l
add r7, r7, r5
/* load and lock code addresses
*/
mr r5, r6
plprcr_loop:
mtspr IC_ADR, r5
addi r5, r5, _CACHE_ALIGN_SIZE /* increment by one line */
lis r4, CACHE_CMD_LOAD_LOCK@h
ori r4, r4, CACHE_CMD_LOAD_LOCK@l
mtspr IC_CST, r4
isync
cmpw r5, r7
blt plprcr_loop
/* IC_CST error bits not evaluated
*/
/* switch PLPRCR
*/
mfspr r4, IMMR /* read IMMR */
rlwinm r4, r4, 0, 0, 15 /* only high 16 bits count */
/* write sequence according to MPC866 Errata
*/
stw r3, PLPRCR(r4)
isync
lis r3, SPEED_PLPRCR_WAIT_5CYC@h
ori r3, r3, SPEED_PLPRCR_WAIT_5CYC@l
plprcr_wait:
cmpwi r3, 0
beq plprcr_wait_end
nop
subi r3, r3, 1
b plprcr_wait
plprcr_wait_end:
/* unlock instruction cache but leave it enabled
*/
lis r4, CACHE_CMD_UNLOCK_ALL@h
ori r4, r4, CACHE_CMD_UNLOCK_ALL@l
mtspr IC_CST, r4
isync
mtspr LR, r10 /* restore original Link Register value */
blr
plprcr_end:

472
arch/powerpc/cpu/mpc8xx/scc.c
View File

@ -1,472 +0,0 @@
/*
* File: scc.c
* Description:
* Basic ET HW initialization and packet RX/TX routines
*
* NOTE <<<IMPORTANT: PLEASE READ>>>:
* Do not cache Rx/Tx buffers!
*/
/*
* MPC823 <-> MC68160 Connections:
*
* Setup MPC823 to work with MC68160 Enhanced Ethernet
* Serial Tranceiver as follows:
*
* MPC823 Signal MC68160 Comments
* ------ ------ ------- --------
* PA-12 ETHTX --------> TX Eth. Port Transmit Data
* PB-18 E_TENA --------> TENA Eth. Transmit Port Enable
* PA-5 ETHTCK <-------- TCLK Eth. Port Transmit Clock
* PA-13 ETHRX <-------- RX Eth. Port Receive Data
* PC-8 E_RENA <-------- RENA Eth. Receive Enable
* PA-6 ETHRCK <-------- RCLK Eth. Port Receive Clock
* PC-9 E_CLSN <-------- CLSN Eth. Port Collision Indication
*
* FADS Board Signal MC68160 Comments
* ----------------- ------- --------
* (BCSR1) ETHEN* --------> CS2 Eth. Port Enable
* (BSCR4) TPSQEL* --------> TPSQEL Twisted Pair Signal Quality Error Test Enable
* (BCSR4) TPFLDL* --------> TPFLDL Twisted Pair Full-Duplex
* (BCSR4) ETHLOOP --------> LOOP Eth. Port Diagnostic Loop-Back
*
*/
#include <common.h>
#include <malloc.h>
#include <commproc.h>
#include <net.h>
#include <command.h>
#if defined(CONFIG_CMD_NET) && defined(SCC_ENET)
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
#define TX_BUF_CNT 2
#define TOUT_LOOP 10000 /* 10 ms to have a packet sent */
static char txbuf[DBUF_LENGTH];
static uint rxIdx; /* index of the current RX buffer */
static uint txIdx; /* index of the current TX buffer */
/*
* SCC Ethernet Tx and Rx buffer descriptors allocated at the
* immr->udata_bd address on Dual-Port RAM
* Provide for Double Buffering
*/
typedef volatile struct CommonBufferDescriptor {
cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
} RTXBD;
static RTXBD *rtx;
static int scc_send(struct eth_device *dev, void *packet, int length);
static int scc_recv(struct eth_device* dev);
static int scc_init (struct eth_device* dev, bd_t * bd);
static void scc_halt(struct eth_device* dev);
int scc_initialize(bd_t *bis)
{
struct eth_device* dev;
dev = (struct eth_device*) malloc(sizeof *dev);
memset(dev, 0, sizeof *dev);
strcpy(dev->name, "SCC");
dev->iobase = 0;
dev->priv = 0;
dev->init = scc_init;
dev->halt = scc_halt;
dev->send = scc_send;
dev->recv = scc_recv;
eth_register(dev);
return 1;
}
static int scc_send(struct eth_device *dev, void *packet, int length)
{
int i, j=0;
#if 0
volatile char *in, *out;
#endif
/* section 16.9.23.3
* Wait for ready
*/
#if 0
while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY);
out = (char *)(rtx->txbd[txIdx].cbd_bufaddr);
in = packet;
for(i = 0; i < length; i++) {
*out++ = *in++;
}
rtx->txbd[txIdx].cbd_datlen = length;
rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST);
while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) j++;
#ifdef ET_DEBUG
printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
#endif
i = (rtx->txbd[txIdx++].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
/* wrap around buffer index when necessary */
if (txIdx >= TX_BUF_CNT) txIdx = 0;
#endif
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
udelay (1); /* will also trigger Wd if needed */
j++;
}
if (j>=TOUT_LOOP) printf("TX not ready\n");
rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
rtx->txbd[txIdx].cbd_datlen = length;
rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |BD_ENET_TX_WRAP);
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
udelay (1); /* will also trigger Wd if needed */
j++;
}
if (j>=TOUT_LOOP) printf("TX timeout\n");
#ifdef ET_DEBUG
printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
#endif
i = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
return i;
}
static int scc_recv (struct eth_device *dev)
{
int length;
for (;;) {
/* section 16.9.23.2 */
if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
length = -1;
break; /* nothing received - leave for() loop */
}
length = rtx->rxbd[rxIdx].cbd_datlen;
if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
#ifdef ET_DEBUG
printf ("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
#endif
} else {
/* Pass the packet up to the protocol layers. */
net_process_received_packet(net_rx_packets[rxIdx],
length - 4);
}
/* Give the buffer back to the SCC. */
rtx->rxbd[rxIdx].cbd_datlen = 0;
/* wrap around buffer index when necessary */
if ((rxIdx + 1) >= PKTBUFSRX) {
rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
rxIdx = 0;
} else {
rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
rxIdx++;
}
}
return length;
}
/**************************************************************
*
* SCC Ethernet Initialization Routine
*
*************************************************************/
static int scc_init (struct eth_device *dev, bd_t * bis)
{
int i;
scc_enet_t *pram_ptr;
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]);
rxIdx = 0;
txIdx = 0;
if (!rtx)
rtx = (RTXBD *)(immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
/* Configure port A pins for Txd and Rxd.
*/
immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
/* Configure port B pins for Txd and Rxd.
*/
immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
#else
#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
#endif
#if defined(PC_ENET_LBK)
/* Configure port C pins to disable External Loopback
*/
immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
#endif /* PC_ENET_LBK */
/* Configure port C pins to enable CLSN and RENA.
*/
immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
/* Configure port A for TCLK and RCLK.
*/
immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
/*
* Configure Serial Interface clock routing -- see section 16.7.5.3
* First, clear all SCC bits to zero, then set the ones we want.
*/
immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
/*
* Initialize SDCR -- see section 16.9.23.7
* SDMA configuration register
*/
immr->im_siu_conf.sc_sdcr = 0x01;
/*
* Setup SCC Ethernet Parameter RAM
*/
pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */
pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */
pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */
pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */
pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */
/*
* Setup Receiver Buffer Descriptors (13.14.24.18)
* Settings:
* Empty, Wrap
*/
for (i = 0; i < PKTBUFSRX; i++) {
rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
rtx->rxbd[i].cbd_datlen = 0; /* Reset */
rtx->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
}
rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
/*
* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
* Settings:
* Add PADs to Short FRAMES, Wrap, Last, Tx CRC
*/
for (i = 0; i < TX_BUF_CNT; i++) {
rtx->txbd[i].cbd_sc =
(BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
rtx->txbd[i].cbd_datlen = 0; /* Reset */
rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
}
rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
/*
* Enter Command: Initialize Rx Params for SCC
*/
do { /* Spin until ready to issue command */
__asm__ ("eieio");
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
/* Issue command */
immr->im_cpm.cp_cpcr =
((CPM_CR_INIT_RX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
do { /* Spin until command processed */
__asm__ ("eieio");
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
/*
* Ethernet Specific Parameter RAM
* see table 13-16, pg. 660,
* pg. 681 (example with suggested settings)
*/
pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */
pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
#define ea eth_get_ethaddr()
pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
#undef ea
pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
/*
* Enter Command: Initialize Tx Params for SCC
*/
do { /* Spin until ready to issue command */
__asm__ ("eieio");
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
/* Issue command */
immr->im_cpm.cp_cpcr =
((CPM_CR_INIT_TX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
do { /* Spin until command processed */
__asm__ ("eieio");
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
/*
* Mask all Events in SCCM - we use polling mode
*/
immr->im_cpm.cp_scc[SCC_ENET].scc_sccm = 0;
/*
* Clear Events in SCCE -- Clear bits by writing 1's
*/
immr->im_cpm.cp_scc[SCC_ENET].scc_scce = ~(0x0);
/*
* Initialize GSMR High 32-Bits
* Settings: Normal Mode
*/
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrh = 0;
/*
* Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
* Settings:
* TCI = Invert
* TPL = 48 bits
* TPP = Repeating 10's
* MODE = Ethernet
*/
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl = (SCC_GSMRL_TCI |
SCC_GSMRL_TPL_48 |
SCC_GSMRL_TPP_10 |
SCC_GSMRL_MODE_ENET);
/*
* Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
*/
immr->im_cpm.cp_scc[SCC_ENET].scc_dsr = 0xd555;
/*
* Initialize the PSMR
* Settings:
* CRC = 32-Bit CCITT
* NIB = Begin searching for SFD 22 bits after RENA
* FDE = Full Duplex Enable
* LPB = Loopback Enable (Needed when FDE is set)
* BRO = Reject broadcast packets
* PROMISCOUS = Catch all packets regardless of dest. MAC adress
*/
immr->im_cpm.cp_scc[SCC_ENET].scc_psmr = SCC_PSMR_ENCRC |
SCC_PSMR_NIB22 |
#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
SCC_PSMR_FDE | SCC_PSMR_LPB |
#endif
#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
SCC_PSMR_BRO |
#endif
#if defined(CONFIG_SCC_ENET_PROMISCOUS)
SCC_PSMR_PRO |
#endif
0;
/*
* Configure Ethernet TENA Signal
*/
#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
#else
#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
#endif
/*
* Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
*/
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
return 1;
}
static void scc_halt (struct eth_device *dev)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
}
#if 0
void restart (void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
#endif
#endif

676
arch/powerpc/cpu/mpc8xx/serial.c
View File

@ -1,676 +0,0 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <commproc.h>
#include <command.h>
#include <serial.h>
#include <watchdog.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */
#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
#define SMC_INDEX 0
#define PROFF_SMC PROFF_SMC1
#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
#define SMC_INDEX 1
#define PROFF_SMC PROFF_SMC2
#define CPM_CR_CH_SMC CPM_CR_CH_SMC2
#endif /* CONFIG_8xx_CONS_SMCx */
#if defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */
#define SCC_INDEX 0
#define PROFF_SCC PROFF_SCC1
#define CPM_CR_CH_SCC CPM_CR_CH_SCC1
#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */
#define SCC_INDEX 1
#define PROFF_SCC PROFF_SCC2
#define CPM_CR_CH_SCC CPM_CR_CH_SCC2
#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */
#define SCC_INDEX 2
#define PROFF_SCC PROFF_SCC3
#define CPM_CR_CH_SCC CPM_CR_CH_SCC3
#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */
#define SCC_INDEX 3
#define PROFF_SCC PROFF_SCC4
#define CPM_CR_CH_SCC CPM_CR_CH_SCC4
#endif /* CONFIG_8xx_CONS_SCCx */
#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
#define CONFIG_SYS_SMC_RXBUFLEN 1
#define CONFIG_SYS_MAXIDLE 0
#else
#if !defined(CONFIG_SYS_MAXIDLE)
#error "you must define CONFIG_SYS_MAXIDLE"
#endif
#endif
typedef volatile struct serialbuffer {
cbd_t rxbd; /* Rx BD */
cbd_t txbd; /* Tx BD */
uint rxindex; /* index for next character to read */
volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
volatile uchar txbuf; /* tx buffers */
} serialbuffer_t;
static void serial_setdivisor(volatile cpm8xx_t *cp)
{
int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
if(divisor/16>0x1000) {
/* bad divisor, assume 50MHz clock and 9600 baud */
divisor=(50*1000*1000 + 8*9600)/16/9600;
}
#ifdef CONFIG_SYS_BRGCLK_PRESCALE
divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
#endif
if(divisor<=0x1000) {
cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
} else {
cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
}
}
#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
/*
* Minimal serial functions needed to use one of the SMC ports
* as serial console interface.
*/
static void smc_setbrg (void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cp = &(im->im_cpm);
/* Set up the baud rate generator.
* See 8xx_io/commproc.c for details.
*
* Wire BRG1 to SMCx
*/
cp->cp_simode = 0x00000000;
serial_setdivisor(cp);
}
static int smc_init (void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile smc_t *sp;
volatile smc_uart_t *up;
volatile cpm8xx_t *cp = &(im->im_cpm);
#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850))
volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
#endif
uint dpaddr;
volatile serialbuffer_t *rtx;
/* initialize pointers to SMC */
sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
#ifdef CONFIG_SYS_SMC_UCODE_PATCH
up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
#else
/* Disable relocation */
up->smc_rpbase = 0;
#endif
/* Disable transmitter/receiver. */
sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
/* Enable SDMA. */
im->im_siu_conf.sc_sdcr = 1;
/* clear error conditions */
#ifdef CONFIG_SYS_SDSR
im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
#else
im->im_sdma.sdma_sdsr = 0x83;
#endif
/* clear SDMA interrupt mask */
#ifdef CONFIG_SYS_SDMR
im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
#else
im->im_sdma.sdma_sdmr = 0x00;
#endif
#if defined(CONFIG_8xx_CONS_SMC1)
/* Use Port B for SMC1 instead of other functions. */
cp->cp_pbpar |= 0x000000c0;
cp->cp_pbdir &= ~0x000000c0;
cp->cp_pbodr &= ~0x000000c0;
#else /* CONFIG_8xx_CONS_SMC2 */
# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
/* Use Port A for SMC2 instead of other functions. */
ip->iop_papar |= 0x00c0;
ip->iop_padir &= ~0x00c0;
ip->iop_paodr &= ~0x00c0;
# else /* must be a 860 then */
/* Use Port B for SMC2 instead of other functions.
*/
cp->cp_pbpar |= 0x00000c00;
cp->cp_pbdir &= ~0x00000c00;
cp->cp_pbodr &= ~0x00000c00;
# endif
#endif
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
dpaddr = CPM_SERIAL_BASE;
rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
/* Allocate space for two buffer descriptors in the DP ram.
* For now, this address seems OK, but it may have to
* change with newer versions of the firmware.
* damm: allocating space after the two buffers for rx/tx data
*/
rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
rtx->rxbd.cbd_sc = 0;
rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
rtx->txbd.cbd_sc = 0;
/* Set up the uart parameters in the parameter ram. */
up->smc_rbase = dpaddr;
up->smc_tbase = dpaddr+sizeof(cbd_t);
up->smc_rfcr = SMC_EB;
up->smc_tfcr = SMC_EB;
#if defined (CONFIG_SYS_SMC_UCODE_PATCH)
up->smc_rbptr = up->smc_rbase;
up->smc_tbptr = up->smc_tbase;
up->smc_rstate = 0;
up->smc_tstate = 0;
#endif
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
/* Mask all interrupts and remove anything pending.
*/
sp->smc_smcm = 0;
sp->smc_smce = 0xff;
#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4
/* clock source is PLD */
/* set freq to 19200 Baud */
*((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3;
/* configure clk4 as input */
im->im_ioport.iop_pdpar |= 0x800;
im->im_ioport.iop_pddir &= ~0x800;
cp->cp_simode = ((cp->cp_simode & ~0xf000) | 0x7000);
#else
/* Set up the baud rate generator */
smc_setbrg ();
#endif
/* Make the first buffer the only buffer. */
rtx->txbd.cbd_sc |= BD_SC_WRAP;
rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
/* single/multi character receive. */
up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
up->smc_maxidl = CONFIG_SYS_MAXIDLE;
rtx->rxindex = 0;
/* Initialize Tx/Rx parameters. */
while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
;
cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
;
/* Enable transmitter/receiver. */
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
return (0);
}
static void
smc_putc(const char c)
{
volatile smc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
volatile serialbuffer_t *rtx;
if (c == '\n')
smc_putc ('\r');
up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
#ifdef CONFIG_SYS_SMC_UCODE_PATCH
up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
#endif
rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
/* Wait for last character to go. */
rtx->txbuf = c;
rtx->txbd.cbd_datlen = 1;
rtx->txbd.cbd_sc |= BD_SC_READY;
__asm__("eieio");
while (rtx->txbd.cbd_sc & BD_SC_READY) {
WATCHDOG_RESET ();
__asm__("eieio");
}
}
static void
smc_puts (const char *s)
{
while (*s) {
smc_putc (*s++);
}
}
static int
smc_getc(void)
{
volatile smc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
volatile serialbuffer_t *rtx;
unsigned char c;
up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
#ifdef CONFIG_SYS_SMC_UCODE_PATCH
up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
#endif
rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
/* Wait for character to show up. */
while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
WATCHDOG_RESET ();
/* the characters are read one by one,
* use the rxindex to know the next char to deliver
*/
c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex);
rtx->rxindex++;
/* check if all char are readout, then make prepare for next receive */
if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
rtx->rxindex = 0;
rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
}
return(c);
}
static int
smc_tstc(void)
{
volatile smc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
volatile serialbuffer_t *rtx;
up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
#ifdef CONFIG_SYS_SMC_UCODE_PATCH
up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
#endif
rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
}
struct serial_device serial_smc_device =
{
.name = "serial_smc",
.start = smc_init,
.stop = NULL,
.setbrg = smc_setbrg,
.getc = smc_getc,
.tstc = smc_tstc,
.putc = smc_putc,
.puts = smc_puts,
};
#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
static void
scc_setbrg (void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cp = &(im->im_cpm);
/* Set up the baud rate generator.
* See 8xx_io/commproc.c for details.
*
* Wire BRG1 to SCCx
*/
cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
serial_setdivisor(cp);
}
static int scc_init (void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile scc_t *sp;
volatile scc_uart_t *up;
volatile cbd_t *tbdf, *rbdf;
volatile cpm8xx_t *cp = &(im->im_cpm);
uint dpaddr;
#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850)
volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
#endif
/* initialize pointers to SCC */
sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
/* Disable transmitter/receiver. */
sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#if (SCC_INDEX == 2) && defined(CONFIG_MPC850)
/*
* The MPC850 has SCC3 on Port B
*/
cp->cp_pbpar |= 0x06;
cp->cp_pbdir &= ~0x06;
cp->cp_pbodr &= ~0x06;
#elif (SCC_INDEX < 2)
/*
* Standard configuration for SCC's is on Part A
*/
ip->iop_papar |= ((3 << (2 * SCC_INDEX)));
ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
#endif
/* Allocate space for two buffer descriptors in the DP ram. */
dpaddr = dpram_alloc_align(sizeof(cbd_t)*2 + 2, 8);
/* Enable SDMA. */
im->im_siu_conf.sc_sdcr = 0x0001;
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
rbdf->cbd_bufaddr = (uint) (rbdf+2);
rbdf->cbd_sc = 0;
tbdf = rbdf + 1;
tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
tbdf->cbd_sc = 0;
/* Set up the baud rate generator. */
scc_setbrg ();
/* Set up the uart parameters in the parameter ram. */
up->scc_genscc.scc_rbase = dpaddr;
up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
/* Initialize Tx/Rx parameters. */
while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
;
cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
;
up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
up->scc_genscc.scc_mrblr = 1; /* Single character receive */
up->scc_maxidl = 0; /* disable max idle */
up->scc_brkcr = 1; /* send one break character on stop TX */
up->scc_parec = 0;
up->scc_frmec = 0;
up->scc_nosec = 0;
up->scc_brkec = 0;
up->scc_uaddr1 = 0;
up->scc_uaddr2 = 0;
up->scc_toseq = 0;
up->scc_char1 = 0x8000;
up->scc_char2 = 0x8000;
up->scc_char3 = 0x8000;
up->scc_char4 = 0x8000;
up->scc_char5 = 0x8000;
up->scc_char6 = 0x8000;
up->scc_char7 = 0x8000;
up->scc_char8 = 0x8000;
up->scc_rccm = 0xc0ff;
/* Set low latency / small fifo. */
sp->scc_gsmrh = SCC_GSMRH_RFW;
/* Set SCC(x) clock mode to 16x
* See 8xx_io/commproc.c for details.
*
* Wire BRG1 to SCCn
*/
/* Set UART mode, clock divider 16 on Tx and Rx */
sp->scc_gsmrl &= ~0xF;
sp->scc_gsmrl |=
(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
sp->scc_psmr = 0;
sp->scc_psmr |= SCU_PSMR_CL;
/* Mask all interrupts and remove anything pending. */
sp->scc_sccm = 0;
sp->scc_scce = 0xffff;
sp->scc_dsr = 0x7e7e;
sp->scc_psmr = 0x3000;
/* Make the first buffer the only buffer. */
tbdf->cbd_sc |= BD_SC_WRAP;
rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
/* Enable transmitter/receiver. */
sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
return (0);
}
static void
scc_putc(const char c)
{
volatile cbd_t *tbdf;
volatile char *buf;
volatile scc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
if (c == '\n')
scc_putc ('\r');
up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
/* Wait for last character to go. */
buf = (char *)tbdf->cbd_bufaddr;
*buf = c;
tbdf->cbd_datlen = 1;
tbdf->cbd_sc |= BD_SC_READY;
__asm__("eieio");
while (tbdf->cbd_sc & BD_SC_READY) {
__asm__("eieio");
WATCHDOG_RESET ();
}
}
static void
scc_puts (const char *s)
{
while (*s) {
scc_putc (*s++);
}
}
static int
scc_getc(void)
{
volatile cbd_t *rbdf;
volatile unsigned char *buf;
volatile scc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
unsigned char c;
up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
/* Wait for character to show up. */
buf = (unsigned char *)rbdf->cbd_bufaddr;
while (rbdf->cbd_sc & BD_SC_EMPTY)
WATCHDOG_RESET ();
c = *buf;
rbdf->cbd_sc |= BD_SC_EMPTY;
return(c);
}
static int
scc_tstc(void)
{
volatile cbd_t *rbdf;
volatile scc_uart_t *up;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
return(!(rbdf->cbd_sc & BD_SC_EMPTY));
}
struct serial_device serial_scc_device =
{
.name = "serial_scc",
.start = scc_init,
.stop = NULL,
.setbrg = scc_setbrg,
.getc = scc_getc,
.tstc = scc_tstc,
.putc = scc_putc,
.puts = scc_puts,
};
#endif /* CONFIG_8xx_CONS_SCCx */
__weak struct serial_device *default_serial_console(void)
{
#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
return &serial_smc_device;
#else
return &serial_scc_device;
#endif
}
void mpc8xx_serial_initialize(void)
{
#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
serial_register(&serial_smc_device);
#endif
#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
serial_register(&serial_scc_device);
#endif
}
#if defined(CONFIG_CMD_KGDB)
void
kgdb_serial_init(void)
{
int i = -1;
if (strcmp(default_serial_console()->name, "serial_smc") == 0)
{
#if defined(CONFIG_8xx_CONS_SMC1)
i = 1;
#elif defined(CONFIG_8xx_CONS_SMC2)
i = 2;
#endif
}
else if (strcmp(default_serial_console()->name, "serial_scc") == 0)
{
#if defined(CONFIG_8xx_CONS_SCC1)
i = 1;
#elif defined(CONFIG_8xx_CONS_SCC2)
i = 2;
#elif defined(CONFIG_8xx_CONS_SCC3)
i = 3;
#elif defined(CONFIG_8xx_CONS_SCC4)
i = 4;
#endif
}
if (i >= 0)
{
serial_printf("[on %s%d] ", default_serial_console()->name, i);
}
}
void
putDebugChar (int c)
{
serial_putc (c);
}
void
putDebugStr (const char *str)
{
serial_puts (str);
}
int
getDebugChar (void)
{
return serial_getc();
}
void
kgdb_interruptible (int yes)
{
return;
}
#endif
#endif /* CONFIG_8xx_CONS_NONE */

403
arch/powerpc/cpu/mpc8xx/speed.c
View File

@ -1,403 +0,0 @@
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8xx.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CONFIG_SYS_MEASURE_CPUCLK) || defined(DEBUG)
#define PITC_SHIFT 16
#define PITR_SHIFT 16
/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */
#define SPEED_PIT_COUNTS 58
#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
/* Access functions for the Machine State Register */
static __inline__ unsigned long get_msr(void)
{
unsigned long msr;
asm volatile("mfmsr %0" : "=r" (msr) :);
return msr;
}
static __inline__ void set_msr(unsigned long msr)
{
asm volatile("mtmsr %0" : : "r" (msr));
}
/* ------------------------------------------------------------------------- */
/*
* Measure CPU clock speed (core clock GCLK1, GCLK2),
* also determine bus clock speed (checking bus divider factor)
*
* (Approx. GCLK frequency in Hz)
*
* Initializes timer 2 and PIT, but disables them before return.
* [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4]
*
* When measuring the CPU clock against the PIT, we count cpu clocks
* for 58/8192 seconds with a prescale divide by 177 for the cpu clock.
* These strange values for the timing interval and prescaling are used
* because the formula for the CPU clock is:
*
* CPU clock = count * (177 * (8192 / 58))
*
* = count * 24999.7241
*
* which is very close to
*
* = count * 25000
*
* Since the count gives the CPU clock divided by 25000, we can get
* the CPU clock rounded to the nearest 0.1 MHz by
*
* CPU clock = ((count + 2) / 4) * 100000;
*
* The rounding is important since the measurement is sometimes going
* to be high or low by 0.025 MHz, depending on exactly how the clocks
* and counters interact. By rounding we get the exact answer for any
* CPU clock that is an even multiple of 0.1 MHz.
*/
unsigned long measure_gclk(void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
ulong timer2_val;
ulong msr_val;
#ifdef CONFIG_SYS_8XX_XIN
/* dont use OSCM, only use EXTCLK/512 */
immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
#else
immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
#endif
/* Reset + Stop Timer 2, no cascading
*/
timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
/* Keep stopped, halt in debug mode
*/
timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2);
/* Timer 2 setup:
* Output ref. interrupt disable, int. clock
* Prescale by 177. Note that prescaler divides by value + 1
* so we must subtract 1 here.
*/
timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN;
timerp->cpmt_tcn2 = 0; /* reset state */
timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */
/*
* PIT setup:
*
* We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz),
* so the count value would be SPEED_PITC_COUNTS - 1.
* But there would be an uncertainty in the start time of 1/4
* count since when we enable the PIT the count is not
* synchronized to the 32768 Hz oscillator. The trick here is
* to start the count higher and wait until the PIT count
* changes to the required value before starting timer 2.
*
* One count high should be enough, but occasionally the start
* is off by 1 or 2 counts of 32768 Hz. With the start value
* set two counts high it seems very reliable.
*/
immr->im_sitk.sitk_pitck = KAPWR_KEY; /* PIT initialization */
immr->im_sit.sit_pitc = SPEED_PITC_INIT;
immr->im_sitk.sitk_piscrk = KAPWR_KEY;
immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
/*
* Start measurement - disable interrupts, just in case
*/
msr_val = get_msr ();
set_msr (msr_val & ~MSR_EE);
immr->im_sit.sit_piscr |= PISCR_PTE;
/* spin until get exact count when we want to start */
while (immr->im_sit.sit_pitr > SPEED_PITC);
timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */
while ((immr->im_sit.sit_piscr & PISCR_PS) == 0);
timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */
/* re-enable external interrupts if they were on */
set_msr (msr_val);
/* Disable timer and PIT
*/
timer2_val = timerp->cpmt_tcn2; /* save before reset timer */
timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
immr->im_sit.sit_piscr &= ~PISCR_PTE;
#if defined(CONFIG_SYS_8XX_XIN)
/* not using OSCM, using XIN, so scale appropriately */
return (((timer2_val + 2) / 4) * (CONFIG_SYS_8XX_XIN/512))/8192 * 100000L;
#else
return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
#endif
}
#endif
void get_brgclk(uint sccr)
{
uint divider = 0;
switch((sccr&SCCR_DFBRG11)>>11){
case 0:
divider = 1;
break;
case 1:
divider = 4;
break;
case 2:
divider = 16;
break;
case 3:
divider = 64;
break;
}
gd->arch.brg_clk = gd->cpu_clk/divider;
}
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
/*
* get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
* or (if it is not defined) measure_gclk() (which uses the ref clock)
* from above.
*/
int get_clocks (void)
{
uint immr = get_immr (0); /* Return full IMMR contents */
volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
uint sccr = immap->im_clkrst.car_sccr;
/*
* If for some reason measuring the gclk frequency won't
* work, we return the hardwired value.
* (For example, the cogent CMA286-60 CPU module has no
* separate oscillator for PITRTCLK)
*/
#if defined(CONFIG_8xx_GCLK_FREQ)
gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
#elif defined(CONFIG_8xx_OSCLK)
#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
uint pll = immap->im_clkrst.car_plprcr;
uint clk;
if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
(PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
(1<<PLPRCR_val(S));
} else {
clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
}
if (pll & PLPRCR_CSRC) { /* Low frequency division factor is used */
gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
} else { /* High frequency division factor is used */
gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
}
#else
gd->cpu_clk = measure_gclk();
#endif /* CONFIG_8xx_GCLK_FREQ */
if ((sccr & SCCR_EBDF11) == 0) {
/* No Bus Divider active */
gd->bus_clk = gd->cpu_clk;
} else {
/* The MPC8xx has only one BDF: half clock speed */
gd->bus_clk = gd->cpu_clk / 2;
}
get_brgclk(sccr);
return (0);
}
#else /* CONFIG_8xx_CPUCLK_DEFAULT defined, use dynamic clock setting */
static long init_pll_866 (long clk);
/* Adjust sdram refresh rate to actual CPU clock.
*/
static int sdram_adjust_866(void)
{
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
long mamr;
mamr = immr->im_memctl.memc_mamr;
mamr &= ~MAMR_PTA_MSK;
mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
immr->im_memctl.memc_mamr = mamr;
return 0;
}
/*
* Adjust sdram refresh rate to actual CPU clock
* and set timebase source according to actual CPU clock
*/
static int adjust_sdram_tbs_8xx(void)
{
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) && \
!defined(CONFIG_TQM885D)
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
long mamr;
long sccr;
mamr = immr->im_memctl.memc_mamr;
mamr &= ~MAMR_PTA_MSK;
mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
immr->im_memctl.memc_mamr = mamr;
if (gd->cpu_clk < 67000000) {
sccr = immr->im_clkrst.car_sccr;
sccr |= SCCR_TBS;
immr->im_clkrst.car_sccr = sccr;
}
#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
return 0;
}
/* This function sets up PLL (init_pll_866() is called) and
* fills gd->cpu_clk and gd->bus_clk according to the environment
* variable 'cpuclk' or to CONFIG_8xx_CPUCLK_DEFAULT (if 'cpuclk'
* contains invalid value).
* This functions requires an MPC866 or newer series CPU.
*/
int get_clocks(void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
char tmp[64];
long cpuclk = 0;
long sccr_reg;
int ret;
if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0)
cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk))
cpuclk = CONFIG_8xx_CPUCLK_DEFAULT;
gd->cpu_clk = init_pll_866 (cpuclk);
#if defined(CONFIG_SYS_MEASURE_CPUCLK)
gd->cpu_clk = measure_gclk ();
#endif
get_brgclk(immr->im_clkrst.car_sccr);
/* if cpu clock <= 66 MHz then set bus division factor to 1,
* otherwise set it to 2
*/
sccr_reg = immr->im_clkrst.car_sccr;
sccr_reg &= ~SCCR_EBDF11;
if (gd->cpu_clk <= 66000000) {
sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */
gd->bus_clk = gd->cpu_clk;
} else {
sccr_reg |= SCCR_EBDF01; /* bus division factor = 2 */
gd->bus_clk = gd->cpu_clk / 2;
}
immr->im_clkrst.car_sccr = sccr_reg;
ret = sdram_adjust_866();
if (ret)
return ret;
return adjust_sdram_tbs_8xx();
}
/* Configure PLL for MPC866/859/885 CPU series
* PLL multiplication factor is set to the value nearest to the desired clk,
* assuming a oscclk of 10 MHz.
*/
static long init_pll_866 (long clk)
{
extern void plprcr_write_866 (long);
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
long n, plprcr;
char mfi, mfn, mfd, s, pdf;
long step_mfi, step_mfn;
if (clk < 20000000) {
clk *= 2;
pdf = 1;
} else {
pdf = 0;
}
if (clk < 40000000) {
s = 2;
step_mfi = CONFIG_8xx_OSCLK / 4;
mfd = 7;
step_mfn = CONFIG_8xx_OSCLK / 30;
} else if (clk < 80000000) {
s = 1;
step_mfi = CONFIG_8xx_OSCLK / 2;
mfd = 14;
step_mfn = CONFIG_8xx_OSCLK / 30;
} else {
s = 0;
step_mfi = CONFIG_8xx_OSCLK;
mfd = 29;
step_mfn = CONFIG_8xx_OSCLK / 30;
}
/* Calculate integer part of multiplication factor
*/
n = clk / step_mfi;
mfi = (char)n;
/* Calculate numerator of fractional part of multiplication factor
*/
n = clk - (n * step_mfi);
mfn = (char)(n / step_mfn);
/* Calculate effective clk
*/
n = ((mfi * step_mfi) + (mfn * step_mfn)) / (pdf + 1);
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
plprcr = (immr->im_clkrst.car_plprcr & ~(PLPRCR_MFN_MSK
| PLPRCR_MFD_MSK | PLPRCR_S_MSK
| PLPRCR_MFI_MSK | PLPRCR_DBRMO
| PLPRCR_PDF_MSK))
| (mfn << PLPRCR_MFN_SHIFT)
| (mfd << PLPRCR_MFD_SHIFT)
| (s << PLPRCR_S_SHIFT)
| (mfi << PLPRCR_MFI_SHIFT)
| (pdf << PLPRCR_PDF_SHIFT);
if( (mfn > 0) && ((mfd / mfn) > 10) )
plprcr |= PLPRCR_DBRMO;
plprcr_write_866 (plprcr); /* set value using SIU4/9 workaround */
immr->im_clkrstk.cark_plprcrk = 0x00000000;
return (n);
}
#endif /* CONFIG_8xx_CPUCLK_DEFAULT */

533
arch/powerpc/cpu/mpc8xx/spi.c
View File

@ -1,533 +0,0 @@
/*
* Copyright (c) 2001 Navin Boppuri / Prashant Patel
* <nboppuri@trinetcommunication.com>,
* <pmpatel@trinetcommunication.com>
* Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
* Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* MPC8xx CPM SPI interface.
*
* Parts of this code are probably not portable and/or specific to
* the board which I used for the tests. Please send fixes/complaints
* to wd@denx.de
*
*/
#include <common.h>
#include <mpc8xx.h>
#include <commproc.h>
#include <linux/ctype.h>
#include <malloc.h>
#include <post.h>
#include <serial.h>
#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI)
/* Warning:
* You cannot enable DEBUG for early system initalization, i. e. when
* this driver is used to read environment parameters like "baudrate"
* from EEPROM which are used to initialize the serial port which is
* needed to print the debug messages...
*/
#undef DEBUG
#define SPI_EEPROM_WREN 0x06
#define SPI_EEPROM_RDSR 0x05
#define SPI_EEPROM_READ 0x03
#define SPI_EEPROM_WRITE 0x02
/* ---------------------------------------------------------------
* Offset for initial SPI buffers in DPRAM:
* We need a 520 byte scratch DPRAM area to use at an early stage.
* It is used between the two initialization calls (spi_init_f()
* and spi_init_r()).
* The value 0xb00 makes it far enough from the start of the data
* area (as well as from the stack pointer).
* --------------------------------------------------------------- */
#ifndef CONFIG_SYS_SPI_INIT_OFFSET
#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00
#endif
#ifdef DEBUG
#define DPRINT(a) printf a;
/* -----------------------------------------------
* Helper functions to peek into tx and rx buffers
* ----------------------------------------------- */
static const char * const hex_digit = "0123456789ABCDEF";
static char quickhex (int i)
{
return hex_digit[i];
}
static void memdump (void *pv, int num)
{
int i;
unsigned char *pc = (unsigned char *) pv;
for (i = 0; i < num; i++)
printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
printf ("\t");
for (i = 0; i < num; i++)
printf ("%c", isprint (pc[i]) ? pc[i] : '.');
printf ("\n");
}
#else /* !DEBUG */
#define DPRINT(a)
#endif /* DEBUG */
/* -------------------
* Function prototypes
* ------------------- */
void spi_init (void);
ssize_t spi_read (uchar *, int, uchar *, int);
ssize_t spi_write (uchar *, int, uchar *, int);
ssize_t spi_xfer (size_t);
/* -------------------
* Variables
* ------------------- */
#define MAX_BUFFER 0x104
/* ----------------------------------------------------------------------
* Initially we place the RX and TX buffers at a fixed location in DPRAM!
* ---------------------------------------------------------------------- */
static uchar *rxbuf =
(uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
[CONFIG_SYS_SPI_INIT_OFFSET];
static uchar *txbuf =
(uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
[CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
/* **************************************************************************
*
* Function: spi_init_f
*
* Description: Init SPI-Controller (ROM part)
*
* return: ---
*
* *********************************************************************** */
void spi_init_f (void)
{
unsigned int dpaddr;
volatile spi_t *spi;
volatile immap_t *immr;
volatile cpm8xx_t *cp;
volatile cbd_t *tbdf, *rbdf;
immr = (immap_t *) CONFIG_SYS_IMMR;
cp = (cpm8xx_t *) &immr->im_cpm;
#ifdef CONFIG_SYS_SPI_UCODE_PATCH
spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
#else
spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
/* Disable relocation */
spi->spi_rpbase = 0;
#endif
/* 1 */
/* ------------------------------------------------
* Initialize Port B SPI pins -> page 34-8 MPC860UM
* (we are only in Master Mode !)
* ------------------------------------------------ */
/* --------------------------------------------
* GPIO or per. Function
* PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
* PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
* PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
* PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
* -------------------------------------------- */
cp->cp_pbpar |= 0x0000000E; /* set bits */
cp->cp_pbpar &= ~0x00000001; /* reset bit */
/* ----------------------------------------------
* In/Out or per. Function 0/1
* PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
* PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
* PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
* PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
* ---------------------------------------------- */
cp->cp_pbdir |= 0x0000000F;
/* ----------------------------------------------
* open drain or active output
* PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
* PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
* PBODR[30] = 0 [0x00000002] -> active output: SPICLK
* PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
* ---------------------------------------------- */
cp->cp_pbodr |= 0x00000008;
cp->cp_pbodr &= ~0x00000007;
/* Initialize the parameter ram.
* We need to make sure many things are initialized to zero
*/
spi->spi_rstate = 0;
spi->spi_rdp = 0;
spi->spi_rbptr = 0;
spi->spi_rbc = 0;
spi->spi_rxtmp = 0;
spi->spi_tstate = 0;
spi->spi_tdp = 0;
spi->spi_tbptr = 0;
spi->spi_tbc = 0;
spi->spi_txtmp = 0;
dpaddr = CPM_SPI_BASE;
/* 3 */
/* Set up the SPI parameters in the parameter ram */
spi->spi_rbase = dpaddr;
spi->spi_tbase = dpaddr + sizeof (cbd_t);
/***********IMPORTANT******************/
/*
* Setting transmit and receive buffer descriptor pointers
* initially to rbase and tbase. Only the microcode patches
* documentation talks about initializing this pointer. This
* is missing from the sample I2C driver. If you dont
* initialize these pointers, the kernel hangs.
*/
spi->spi_rbptr = spi->spi_rbase;
spi->spi_tbptr = spi->spi_tbase;
/* 4 */
#ifdef CONFIG_SYS_SPI_UCODE_PATCH
/*
* Initialize required parameters if using microcode patch.
*/
spi->spi_rstate = 0;
spi->spi_tstate = 0;
#else
/* Init SPI Tx + Rx Parameters */
while (cp->cp_cpcr & CPM_CR_FLG)
;
cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cpcr & CPM_CR_FLG)
;
#endif /* CONFIG_SYS_SPI_UCODE_PATCH */
/* 5 */
/* Set SDMA configuration register */
immr->im_siu_conf.sc_sdcr = 0x0001;
/* 6 */
/* Set to big endian. */
spi->spi_tfcr = SMC_EB;
spi->spi_rfcr = SMC_EB;
/* 7 */
/* Set maximum receive size. */
spi->spi_mrblr = MAX_BUFFER;
/* 8 + 9 */
/* tx and rx buffer descriptors */
tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
tbdf->cbd_sc &= ~BD_SC_READY;
rbdf->cbd_sc &= ~BD_SC_EMPTY;
/* Set the bd's rx and tx buffer address pointers */
rbdf->cbd_bufaddr = (ulong) rxbuf;
tbdf->cbd_bufaddr = (ulong) txbuf;
/* 10 + 11 */
cp->cp_spim = 0; /* Mask all SPI events */
cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
return;
}
/* **************************************************************************
*
* Function: spi_init_r
*
* Description: Init SPI-Controller (RAM part) -
* The malloc engine is ready and we can move our buffers to
* normal RAM
*
* return: ---
*
* *********************************************************************** */
void spi_init_r (void)
{
volatile cpm8xx_t *cp;
volatile spi_t *spi;
volatile immap_t *immr;
volatile cbd_t *tbdf, *rbdf;
immr = (immap_t *) CONFIG_SYS_IMMR;
cp = (cpm8xx_t *) &immr->im_cpm;
#ifdef CONFIG_SYS_SPI_UCODE_PATCH
spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
#else
spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
/* Disable relocation */
spi->spi_rpbase = 0;
#endif
/* tx and rx buffer descriptors */
tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
/* Allocate memory for RX and TX buffers */
rxbuf = (uchar *) malloc (MAX_BUFFER);
txbuf = (uchar *) malloc (MAX_BUFFER);
rbdf->cbd_bufaddr = (ulong) rxbuf;
tbdf->cbd_bufaddr = (ulong) txbuf;
return;
}
/****************************************************************************
* Function: spi_write
**************************************************************************** */
ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
{
int i;
memset(rxbuf, 0, MAX_BUFFER);
memset(txbuf, 0, MAX_BUFFER);
*txbuf = SPI_EEPROM_WREN; /* write enable */
spi_xfer(1);
memcpy(txbuf, addr, alen);
*txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
memcpy(alen + txbuf, buffer, len);
spi_xfer(alen + len);
/* ignore received data */
for (i = 0; i < 1000; i++) {
*txbuf = SPI_EEPROM_RDSR; /* read status */
txbuf[1] = 0;
spi_xfer(2);
if (!(rxbuf[1] & 1)) {
break;
}
udelay(1000);
}
if (i >= 1000) {
printf ("*** spi_write: Time out while writing!\n");
}
return len;
}
/****************************************************************************
* Function: spi_read
**************************************************************************** */
ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
{
memset(rxbuf, 0, MAX_BUFFER);
memset(txbuf, 0, MAX_BUFFER);
memcpy(txbuf, addr, alen);
*txbuf = SPI_EEPROM_READ; /* READ memory array */
/*
* There is a bug in 860T (?) that cuts the last byte of input
* if we're reading into DPRAM. The solution we choose here is
* to always read len+1 bytes (we have one extra byte at the
* end of the buffer).
*/
spi_xfer(alen + len + 1);
memcpy(buffer, alen + rxbuf, len);
return len;
}
/****************************************************************************
* Function: spi_xfer
**************************************************************************** */
ssize_t spi_xfer (size_t count)
{
volatile immap_t *immr;
volatile cpm8xx_t *cp;
volatile spi_t *spi;
cbd_t *tbdf, *rbdf;
ushort loop;
int tm;
DPRINT (("*** spi_xfer entered ***\n"));
immr = (immap_t *) CONFIG_SYS_IMMR;
cp = (cpm8xx_t *) &immr->im_cpm;
#ifdef CONFIG_SYS_SPI_UCODE_PATCH
spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
#else
spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
/* Disable relocation */
spi->spi_rpbase = 0;
#endif
tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
/* Set CS for device */
cp->cp_pbdat &= ~0x0001;
/* Setting tx bd status and data length */
tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
tbdf->cbd_datlen = count;
DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
tbdf->cbd_datlen));
/* Setting rx bd status and data length */
rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
rbdf->cbd_datlen = 0; /* rx length has no significance */
loop = cp->cp_spmode & SPMODE_LOOP;
cp->cp_spmode = /*SPMODE_DIV16 |*/ /* BRG/16 mode not used here */
loop |
SPMODE_REV |
SPMODE_MSTR |
SPMODE_EN |
SPMODE_LEN(8) | /* 8 Bits per char */
SPMODE_PM(0x8) ; /* medium speed */
cp->cp_spim = 0; /* Mask all SPI events */
cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
/* start spi transfer */
DPRINT (("*** spi_xfer: Performing transfer ...\n"));
cp->cp_spcom |= SPI_STR; /* Start transmit */
/* --------------------------------
* Wait for SPI transmit to get out
* or time out (1 second = 1000 ms)
* -------------------------------- */
for (tm=0; tm<1000; ++tm) {
if (cp->cp_spie & SPI_TXB) { /* Tx Buffer Empty */
DPRINT (("*** spi_xfer: Tx buffer empty\n"));
break;
}
if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
DPRINT (("*** spi_xfer: Tx BD done\n"));
break;
}
udelay (1000);
}
if (tm >= 1000) {
printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
}
DPRINT (("*** spi_xfer: ... transfer ended\n"));
#ifdef DEBUG
printf ("\nspi_xfer: txbuf after xfer\n");
memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
printf ("spi_xfer: rxbuf after xfer\n");
memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
printf ("\n");
#endif
/* Clear CS for device */
cp->cp_pbdat |= 0x0001;
return count;
}
#endif /* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */
/*
* SPI test
*
* The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
* The interface is configured accordingly and several packets
* are transferred. The configurable test parameters are:
* TEST_MIN_LENGTH - minimum size of packet to transfer
* TEST_MAX_LENGTH - maximum size of packet to transfer
* TEST_NUM - number of tests
*/
#if CONFIG_POST & CONFIG_SYS_POST_SPI
#define TEST_MIN_LENGTH 1
#define TEST_MAX_LENGTH MAX_BUFFER
#define TEST_NUM 1
static void packet_fill (char * packet, int length)
{
char c = (char) length;
int i;
for (i = 0; i < length; i++)
{
packet[i] = c++;
}
}
static int packet_check (char * packet, int length)
{
char c = (char) length;
int i;
for (i = 0; i < length; i++) {
if (packet[i] != c++) return -1;
}
return 0;
}
int spi_post_test (int flags)
{
int res = -1;
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm;
int i;
int l;
spi_init_f ();
spi_init_r ();
cp->cp_spmode |= SPMODE_LOOP;
for (i = 0; i < TEST_NUM; i++) {
for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8) {
packet_fill ((char *)txbuf, l);
spi_xfer (l);
if (packet_check ((char *)rxbuf, l) < 0) {
goto Done;
}
}
}
res = 0;
Done:
cp->cp_spmode &= ~SPMODE_LOOP;
/*
* SCC2 parameter RAM space overlaps
* the SPI parameter RAM space. So we need to restore
* the SCC2 configuration if it is used by UART.
*/
#if !defined(CONFIG_8xx_CONS_NONE)
serial_reinit_all ();
#endif
if (res != 0) {
post_log ("SPI test failed\n");
}
return res;
}
#endif /* CONFIG_POST & CONFIG_SYS_POST_SPI */

650
arch/powerpc/cpu/mpc8xx/start.S
View File

@ -1,650 +0,0 @@
/*
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* U-Boot - Startup Code for PowerPC based Embedded Boards
*
*
* The processor starts at 0x00000100 and the code is executed
* from flash. The code is organized to be at an other address
* in memory, but as long we don't jump around before relocating,
* board_init lies at a quite high address and when the cpu has
* jumped there, everything is ok.
* This works because the cpu gives the FLASH (CS0) the whole
* address space at startup, and board_init lies as a echo of
* the flash somewhere up there in the memory map.
*
* board_init will change CS0 to be positioned at the correct
* address and (s)dram will be positioned at address 0
*/
#include <asm-offsets.h>
#include <config.h>
#include <mpc8xx.h>
#include <version.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <asm/u-boot.h>
/* We don't want the MMU yet.
*/
#undef MSR_KERNEL
#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */
/*
* Set up GOT: Global Offset Table
*
* Use r12 to access the GOT
*/
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(_FIXUP_TABLE_)
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
GOT_ENTRY(__init_end)
GOT_ENTRY(__bss_end)
GOT_ENTRY(__bss_start)
END_GOT
/*
* r3 - 1st arg to board_init(): IMMP pointer
* r4 - 2nd arg to board_init(): boot flag
*/
.text
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
version_string:
.ascii U_BOOT_VERSION_STRING, "\0"
. = EXC_OFF_SYS_RESET
.globl _start
_start:
lis r3, CONFIG_SYS_IMMR@h /* position IMMR */
mtspr 638, r3
/* Initialize machine status; enable machine check interrupt */
/*----------------------------------------------------------------------*/
li r3, MSR_KERNEL /* Set ME, RI flags */
mtmsr r3
mtspr SRR1, r3 /* Make SRR1 match MSR */
mfspr r3, ICR /* clear Interrupt Cause Register */
/* Initialize debug port registers */
/*----------------------------------------------------------------------*/
xor r0, r0, r0 /* Clear R0 */
mtspr LCTRL1, r0 /* Initialize debug port regs */
mtspr LCTRL2, r0
mtspr COUNTA, r0
mtspr COUNTB, r0
/* Reset the caches */
/*----------------------------------------------------------------------*/
mfspr r3, IC_CST /* Clear error bits */
mfspr r3, DC_CST
lis r3, IDC_UNALL@h /* Unlock all */
mtspr IC_CST, r3
mtspr DC_CST, r3
lis r3, IDC_INVALL@h /* Invalidate all */
mtspr IC_CST, r3
mtspr DC_CST, r3
lis r3, IDC_DISABLE@h /* Disable data cache */
mtspr DC_CST, r3
#if !defined(CONFIG_SYS_DELAYED_ICACHE)
/* On IP860 and PCU E,
* we cannot enable IC yet
*/
lis r3, IDC_ENABLE@h /* Enable instruction cache */
#endif
mtspr IC_CST, r3
/* invalidate all tlb's */
/*----------------------------------------------------------------------*/
tlbia
isync
/*
* Calculate absolute address in FLASH and jump there
*----------------------------------------------------------------------*/
lis r3, CONFIG_SYS_MONITOR_BASE@h
ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r3
blr
in_flash:
/* initialize some SPRs that are hard to access from C */
/*----------------------------------------------------------------------*/
lis r3, CONFIG_SYS_IMMR@h /* pass IMMR as arg1 to C routine */
ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
/* Note: R0 is still 0 here */
stwu r0, -4(r1) /* clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
/*
* Disable serialized ifetch and show cycles
* (i.e. set processor to normal mode).
* This is also a silicon bug workaround, see errata
*/
li r2, 0x0007
mtspr ICTRL, r2
/* Set up debug mode entry */
lis r2, CONFIG_SYS_DER@h
ori r2, r2, CONFIG_SYS_DER@l
mtspr DER, r2
/* let the C-code set up the rest */
/* */
/* Be careful to keep code relocatable ! */
/*----------------------------------------------------------------------*/
GET_GOT /* initialize GOT access */
/* r3: IMMR */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f /* run 1st part of board init code (from Flash) */
/* NOTREACHED - board_init_f() does not return */
.globl _start_of_vectors
_start_of_vectors:
/* Machine check */
STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
/* Data Storage exception. "Never" generated on the 860. */
STD_EXCEPTION(0x300, DataStorage, UnknownException)
/* Instruction Storage exception. "Never" generated on the 860. */
STD_EXCEPTION(0x400, InstStorage, UnknownException)
/* External Interrupt exception. */
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
/* Alignment exception. */
. = 0x600
Alignment:
EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
stw r5,_DSISR(r21)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
/* Program check exception */
. = 0x700
ProgramCheck:
EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
MSR_KERNEL, COPY_EE)
/* No FPU on MPC8xx. This exception is not supposed to happen.
*/
STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
/* I guess we could implement decrementer, and may have
* to someday for timekeeping.
*/
STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
STD_EXCEPTION(0xc00, SystemCall, UnknownException)
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
/* On the MPC8xx, this is a software emulation interrupt. It occurs
* for all unimplemented and illegal instructions.
*/
STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
STD_EXCEPTION(0x1500, Reserved5, UnknownException)
STD_EXCEPTION(0x1600, Reserved6, UnknownException)
STD_EXCEPTION(0x1700, Reserved7, UnknownException)
STD_EXCEPTION(0x1800, Reserved8, UnknownException)
STD_EXCEPTION(0x1900, Reserved9, UnknownException)
STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
.globl _end_of_vectors
_end_of_vectors:
. = 0x2000
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception.
* Register r21 is pointer into trap frame, r1 has new stack pointer.
*/
.globl transfer_to_handler
transfer_to_handler:
stw r22,_NIP(r21)
lis r22,MSR_POW@h
andc r23,r23,r22
stw r23,_MSR(r21)
SAVE_GPR(7, r21)
SAVE_4GPRS(8, r21)
SAVE_8GPRS(12, r21)
SAVE_8GPRS(24, r21)
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r21)
li r22,0
stw r22,RESULT(r21)
mtspr SPRG2,r22 /* r1 is now kernel sp */
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
mtspr SRR0,r24
mtspr SRR1,r20
mtlr r23
SYNC
rfi /* jump to handler, enable MMU */
int_return:
mfmsr r28 /* Disable interrupts */
li r4,0
ori r4,r4,MSR_EE
andc r28,r28,r4
SYNC /* Some chip revs need this... */
mtmsr r28
SYNC
lwz r2,_CTR(r1)
lwz r0,_LINK(r1)
mtctr r2
mtlr r0
lwz r2,_XER(r1)
lwz r0,_CCR(r1)
mtspr XER,r2
mtcrf 0xFF,r0
REST_10GPRS(3, r1)
REST_10GPRS(13, r1)
REST_8GPRS(23, r1)
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
mtspr SRR0,r2
mtspr SRR1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
SYNC
rfi
/* Cache functions.
*/
.globl icache_enable
icache_enable:
SYNC
lis r3, IDC_INVALL@h
mtspr IC_CST, r3
lis r3, IDC_ENABLE@h
mtspr IC_CST, r3
blr
.globl icache_disable
icache_disable:
SYNC
lis r3, IDC_DISABLE@h
mtspr IC_CST, r3
blr
.globl icache_status
icache_status:
mfspr r3, IC_CST
srwi r3, r3, 31 /* >>31 => select bit 0 */
blr
.globl dcache_enable
dcache_enable:
#if 0
SYNC
#endif
#if 1
lis r3, 0x0400 /* Set cache mode with MMU off */
mtspr MD_CTR, r3
#endif
lis r3, IDC_INVALL@h
mtspr DC_CST, r3
#if 0
lis r3, DC_SFWT@h
mtspr DC_CST, r3
#endif
lis r3, IDC_ENABLE@h
mtspr DC_CST, r3
blr
.globl dcache_disable
dcache_disable:
SYNC
lis r3, IDC_DISABLE@h
mtspr DC_CST, r3
lis r3, IDC_INVALL@h
mtspr DC_CST, r3
blr
.globl dcache_status
dcache_status:
mfspr r3, DC_CST
srwi r3, r3, 31 /* >>31 => select bit 0 */
blr
.globl dc_read
dc_read:
mtspr DC_ADR, r3
mfspr r3, DC_DAT
blr
/*
* unsigned int get_immr (unsigned int mask)
*
* return (mask ? (IMMR & mask) : IMMR);
*/
.globl get_immr
get_immr:
mr r4,r3 /* save mask */
mfspr r3, IMMR /* IMMR */
cmpwi 0,r4,0 /* mask != 0 ? */
beq 4f
and r3,r3,r4 /* IMMR & mask */
4:
blr
.globl get_pvr
get_pvr:
mfspr r3, PVR
blr
.globl wr_ic_cst
wr_ic_cst:
mtspr IC_CST, r3
blr
.globl rd_ic_cst
rd_ic_cst:
mfspr r3, IC_CST
blr
.globl wr_ic_adr
wr_ic_adr:
mtspr IC_ADR, r3
blr
.globl wr_dc_cst
wr_dc_cst:
mtspr DC_CST, r3
blr
.globl rd_dc_cst
rd_dc_cst:
mfspr r3, DC_CST
blr
.globl wr_dc_adr
wr_dc_adr:
mtspr DC_ADR, r3
blr
/*------------------------------------------------------------------------------*/
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* r3 = dest
* r4 = src
* r5 = length in bytes
* r6 = cachelinesize
*/
.globl relocate_code
relocate_code:
mr r1, r3 /* Set new stack pointer */
mr r9, r4 /* Save copy of Global Data pointer */
mr r10, r5 /* Save copy of Destination Address */
GET_GOT
mr r3, r5 /* Destination Address */
lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
lwz r5, GOT(__init_end)
sub r5, r5, r4
li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
/*
* Fix GOT pointer:
*
* New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
*
* Offset:
*/
sub r15, r10, r4
/* First our own GOT */
add r12, r12, r15
/* then the one used by the C code */
add r30, r30, r15
/*
* Now relocate code
*/
cmplw cr1,r3,r4
addi r0,r5,3
srwi. r0,r0,2
beq cr1,4f /* In place copy is not necessary */
beq 7f /* Protect against 0 count */
mtctr r0
bge cr1,2f
la r8,-4(r4)
la r7,-4(r3)
1: lwzu r0,4(r8)
stwu r0,4(r7)
bdnz 1b
b 4f
2: slwi r0,r0,2
add r8,r4,r0
add r7,r3,r0
3: lwzu r0,-4(r8)
stwu r0,-4(r7)
bdnz 3b
/*
* Now flush the cache: note that we must start from a cache aligned
* address. Otherwise we might miss one cache line.
*/
4: cmpwi r6,0
add r5,r3,r5
beq 7f /* Always flush prefetch queue in any case */
subi r0,r6,1
andc r3,r3,r0
mr r4,r3
5: dcbst 0,r4
add r4,r4,r6
cmplw r4,r5
blt 5b
sync /* Wait for all dcbst to complete on bus */
mr r4,r3
6: icbi 0,r4
add r4,r4,r6
cmplw r4,r5
blt 6b
7: sync /* Wait for all icbi to complete on bus */
isync
/*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
mtlr r0
blr
in_ram:
/*
* Relocation Function, r12 point to got2+0x8000
*
* Adjust got2 pointers, no need to check for 0, this code
* already puts a few entries in the table.
*/
li r0,__got2_entries@sectoff@l
la r3,GOT(_GOT2_TABLE_)
lwz r11,GOT(_GOT2_TABLE_)
mtctr r0
sub r11,r3,r11
addi r3,r3,-4
1: lwzu r0,4(r3)
cmpwi r0,0
beq- 2f
add r0,r0,r11
stw r0,0(r3)
2: bdnz 1b
/*
* Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
*/
li r0,__fixup_entries@sectoff@l
lwz r3,GOT(_FIXUP_TABLE_)
cmpwi r0,0
mtctr r0
addi r3,r3,-4
beq 4f
3: lwzu r4,4(r3)
lwzux r0,r4,r11
cmpwi r0,0
add r0,r0,r11
stw r4,0(r3)
beq- 5f
stw r0,0(r4)
5: bdnz 3b
4:
clear_bss:
/*
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
lwz r4,GOT(__bss_end)
cmplw 0, r3, r4
beq 6f
li r0, 0
5:
stw r0, 0(r3)
addi r3, r3, 4
cmplw 0, r3, r4
bne 5b
6:
mr r3, r9 /* Global Data pointer */
mr r4, r10 /* Destination Address */
bl board_init_r
/*
* Copy exception vector code to low memory
*
* r3: dest_addr
* r7: source address, r8: end address, r9: target address
*/
.globl trap_init
trap_init:
mflr r4 /* save link register */
GET_GOT
lwz r7, GOT(_start)
lwz r8, GOT(_end_of_vectors)
li r9, 0x100 /* reset vector always at 0x100 */
cmplw 0, r7, r8
bgelr /* return if r7>=r8 - just in case */
1:
lwz r0, 0(r7)
stw r0, 0(r9)
addi r7, r7, 4
addi r9, r9, 4
cmplw 0, r7, r8
bne 1b
/*
* relocate `hdlr' and `int_return' entries
*/
li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
li r8, Alignment - _start + EXC_OFF_SYS_RESET
2:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 2b
li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
li r8, SystemCall - _start + EXC_OFF_SYS_RESET
3:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 3b
li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
4:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 4b
mtlr r4 /* restore link register */
blr

216
arch/powerpc/cpu/mpc8xx/traps.c
View File

@ -1,216 +0,0 @@
/*
* linux/arch/powerpc/kernel/traps.c
*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modified by Cort Dougan (cort@cs.nmt.edu)
* and Paul Mackerras (paulus@cs.anu.edu.au)
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* This file handles the architecture-dependent parts of hardware exceptions
*/
#include <common.h>
#include <command.h>
#include <kgdb.h>
#include <asm/processor.h>
#if defined(CONFIG_CMD_BEDBUG)
extern void do_bedbug_breakpoint(struct pt_regs *);
#endif
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
/* THIS NEEDS CHANGING to use the board info structure.
*/
#define END_OF_MEM 0x02000000
/*
* Trap & Exception support
*/
static void print_backtrace(unsigned long *sp)
{
int cnt = 0;
unsigned long i;
printf("Call backtrace: ");
while (sp) {
if ((uint)sp > END_OF_MEM)
break;
i = sp[1];
if (cnt++ % 7 == 0)
printf("\n");
printf("%08lX ", i);
if (cnt > 32) break;
sp = (unsigned long *)*sp;
}
printf("\n");
}
void show_regs(struct pt_regs *regs)
{
int i;
printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
regs->msr&MSR_IR ? 1 : 0,
regs->msr&MSR_DR ? 1 : 0);
printf("\n");
for (i = 0; i < 32; i++) {
if ((i % 8) == 0)
{
printf("GPR%02d: ", i);
}
printf("%08lX ", regs->gpr[i]);
if ((i % 8) == 7)
{
printf("\n");
}
}
}
static void _exception(int signr, struct pt_regs *regs)
{
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
}
void MachineCheckException(struct pt_regs *regs)
{
unsigned long fixup;
/* Probing PCI using config cycles cause this exception
* when a device is not present. Catch it and return to
* the PCI exception handler.
*/
if ((fixup = search_exception_table(regs->nip)) != 0) {
regs->nip = fixup;
return;
}
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
switch( regs->msr & 0x000F0000) {
case (0x80000000>>12):
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
break;
case (0x80000000>>13):
printf("Transfer error ack signal\n");
break;
case (0x80000000>>14):
printf("Data parity signal\n");
break;
case (0x80000000>>15):
printf("Address parity signal\n");
break;
default:
printf("Unknown values in msr\n");
}
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("machine check");
}
void AlignmentException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Alignment Exception");
}
void ProgramCheckException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Program Check Exception");
}
void SoftEmuException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
panic("Software Emulation Exception");
}
void UnknownException(struct pt_regs *regs)
{
#if defined(CONFIG_CMD_KGDB)
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
return;
#endif
printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
regs->nip, regs->msr, regs->trap);
_exception(0, regs);
}
void DebugException(struct pt_regs *regs)
{
printf("Debugger trap at @ %lx\n", regs->nip );
show_regs(regs);
#if defined(CONFIG_CMD_BEDBUG)
do_bedbug_breakpoint( regs );
#endif
}
/* Probe an address by reading. If not present, return -1, otherwise
* return 0.
*/
int addr_probe(uint *addr)
{
#if 0
int retval;
__asm__ __volatile__( \
"1: lwz %0,0(%1)\n" \
" eieio\n" \
" li %0,0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3: li %0,-1\n" \
" b 2b\n" \
".section __ex_table,\"a\"\n" \
" .align 2\n" \
" .long 1b,3b\n" \
".text" \
: "=r" (retval) : "r"(addr));
return (retval);
#endif
return 0;
}

194
arch/powerpc/cpu/mpc8xx/upatch.c
View File

@ -1,194 +0,0 @@
#include <common.h>
#include <commproc.h>
#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
defined(CONFIG_SYS_SMC_UCODE_PATCH)
static void UcodeCopy (volatile cpm8xx_t *cpm);
void cpm_load_patch (volatile immap_t *immr)
{
immr->im_cpm.cp_rccr &= ~0x0003; /* Disable microcode program area */
UcodeCopy ((cpm8xx_t *)&immr->im_cpm); /* Copy ucode patch to DPRAM */
#ifdef CONFIG_SYS_SPI_UCODE_PATCH
{
volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI];
/* Activate the microcode per the instructions in the microcode manual */
/* NOTE: We're only relocating the SPI parameters (not I2C). */
immr->im_cpm.cp_cpmcr1 = 0x802a; /* Write Trap register 1 value */
immr->im_cpm.cp_cpmcr2 = 0x8028; /* Write Trap register 2 value */
spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */
}
#endif
#ifdef CONFIG_SYS_I2C_UCODE_PATCH
{
volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC];
/* Activate the microcode per the instructions in the microcode manual */
/* NOTE: We're only relocating the I2C parameters (not SPI). */
immr->im_cpm.cp_cpmcr3 = 0x802e; /* Write Trap register 3 value */
immr->im_cpm.cp_cpmcr4 = 0x802c; /* Write Trap register 4 value */
iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */
}
#endif
#ifdef CONFIG_SYS_SMC_UCODE_PATCH
{
volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1];
/* Activate the microcode per the instructions in the microcode manual */
/* NOTE: We're only relocating the SMC parameters. */
immr->im_cpm.cp_cpmcr1 = 0x8080; /* Write Trap register 1 value */
immr->im_cpm.cp_cpmcr2 = 0x8088; /* Write Trap register 2 value */
up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET; /* Where to relocte SMC params */
}
#endif
/*
* Enable DPRAM microcode to execute from the first 512 bytes
* and a 256 byte extension of DPRAM.
*/
#ifdef CONFIG_SYS_SMC_UCODE_PATCH
immr->im_cpm.cp_rccr |= 0x0002;
#else
immr->im_cpm.cp_rccr |= 0x0001;
#endif
}
#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh)
static ulong patch_2000[] = {
0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7,
0x3A9CFBC8, 0x77CAE1BB, 0xF4DE7FAD, 0xABAE9330,
0x4E08FDCF, 0x6E0FAFF8, 0x7CCF76CF, 0xFDAFF9CF,
0xABF88DC8, 0xAB5879F7, 0xB0927383, 0xDFD079F7,
0xB090E6BB, 0xE5BBE74F, 0xB3FA6F0F, 0x6FFB76CE,
0xEE0CF9CF, 0x2BFBEFEF, 0xCFEEF9CF, 0x76CEAD23,
0x90B3DF99, 0x7FDDD0C1, 0x4BF847FD, 0x7CCF76CE,
0xCFEF77CA, 0x7EAF7FAD, 0x7DFDF0B7, 0xEF7A7FCA,
0x77CAFBC8, 0x6079E722, 0xFBC85FFF, 0xDFFF5FB3,
0xFFFBFBC8, 0xF3C894A5, 0xE7C9EDF9, 0x7F9A7FAD,
0x5F36AFE8, 0x5F5BFFDF, 0xDF95CB9E, 0xAF7D5FC3,
0xAFED8C1B, 0x5FC3AFDD, 0x5FC5DF99, 0x7EFDB0B3,
0x5FB3FFFE, 0xABAE5FB3, 0xFFFE5FD0, 0x600BE6BB,
0x600B5FD0, 0xDFC827FB, 0xEFDF5FCA, 0xCFDE3A9C,
0xE7C9EDF9, 0xF3C87F9E, 0x54CA7FED, 0x2D3A3637,
0x756F7E9A, 0xF1CE37EF, 0x2E677FEE, 0x10EBADF8,
0xEFDECFEA, 0xE52F7D9F, 0xE12BF1CE, 0x5F647E9A,
0x4DF8CFEA, 0x5F717D9B, 0xEFEECFEA, 0x5F73E522,
0xEFDE5F73, 0xCFDA0B61, 0x7385DF61, 0xE7C9EDF9,
0x7E9A30D5, 0x1458BFFF, 0xF3C85FFF, 0xDFFFA7F8,
0x5F5BBFFE, 0x7F7D10D0, 0x144D5F33, 0xBFFFAF78,
0x5F5BBFFD, 0xA7F85F33, 0xBFFE77FD, 0x30BD4E08,
0xFDCFE5FF, 0x6E0FAFF8, 0x7EEF7E9F, 0xFDEFF1CF,
0x5F17ABF8, 0x0D5B5F5B, 0xFFEF79F7, 0x309EAFDD,
0x5F3147F8, 0x5F31AFED, 0x7FDD50AF, 0x497847FD,
0x7F9E7FED, 0x7DFD70A9, 0xEF7E7ECE, 0x6BA07F9E,
0x2D227EFD, 0x30DB5F5B, 0xFFFD5F5B, 0xFFEF5F5B,
0xFFDF0C9C, 0xAFED0A9A, 0xAFDD0C37, 0x5F37AFBD,
0x7FBDB081, 0x5F8147F8,
};
static ulong patch_2F00[] = {
0x3E303430, 0x34343737, 0xABBF9B99, 0x4B4FBDBD,
0x59949334, 0x9FFF37FB, 0x9B177DD9, 0x936956BB,
0xFBDD697B, 0xDD2FD113, 0x1DB9F7BB, 0x36313963,
0x79373369, 0x3193137F, 0x7331737A, 0xF7BB9B99,
0x9BB19795, 0x77FDFD3D, 0x573B773F, 0x737933F7,
0xB991D115, 0x31699315, 0x31531694, 0xBF4FBDBD,
0x35931497, 0x35376956, 0xBD697B9D, 0x96931313,
0x19797937, 0x69350000,
};
#else
static ulong patch_2000[] = {
0x3fff0000, 0x3ffd0000, 0x3ffb0000, 0x3ff90000,
0x5fefeff8, 0x5f91eff8, 0x3ff30000, 0x3ff10000,
0x3a11e710, 0xedf0ccb9, 0xf318ed66, 0x7f0e5fe2,
0x7fedbb38, 0x3afe7468, 0x7fedf4d8, 0x8ffbb92d,
0xb83b77fd, 0xb0bb5eb9, 0xdfda7fed, 0x90bde74d,
0x6f0dcbd3, 0xe7decfed, 0xcb50cfed, 0xcfeddf6d,
0x914d4f74, 0x5eaedfcb, 0x9ee0e7df, 0xefbb6ffb,
0xe7ef7f0e, 0x9ee57fed, 0xebb7effa, 0xeb30affb,
0x7fea90b3, 0x7e0cf09f, 0xbffff318, 0x5fffdfff,
0xac35efea, 0x7fce1fc1, 0xe2ff5fbd, 0xaffbe2ff,
0x5fbfaffb, 0xf9a87d0f, 0xaef8770f, 0x7d0fb0a2,
0xeffbbfff, 0xcfef5fba, 0x7d0fbfff, 0x5fba4cf8,
0x7fddd09b, 0x49f847fd, 0x7efdf097, 0x7fedfffd,
0x7dfdf093, 0xef7e7e1e, 0x5fba7f0e, 0x3a11e710,
0xedf0cc87, 0xfb18ad0a, 0x1f85bbb8, 0x74283b7e,
0x7375e4bb, 0x2ab64fb8, 0x5c7de4bb, 0x32fdffbf,
0x5f0843f8, 0x7ce3e1bb, 0xe74f7ded, 0x6f0f4fe8,
0xc7ba32be, 0x73f2efeb, 0x600b4f78, 0xe5bb760b,
0x5388aef8, 0x4ef80b6a, 0xcfef9ee5, 0xabf8751f,
0xefef5b88, 0x741f4fe8, 0x751e760d, 0x7fdb70dd,
0x741cafce, 0xefcc7fce, 0x751e7088, 0x741ce7bb,
0x334ecfed, 0xafdbefeb, 0xe5bb760b, 0x53ceaef8,
0xafe8e7eb, 0x4bf8771e, 0x7e007fed, 0x4fcbe2cc,
0x7fbc3085, 0x7b0f7a0f, 0x34b177fd, 0xb0e75e93,
0xdf313e3b, 0xaf78741f, 0x741f30cc, 0xcfef5f08,
0x741f3e88, 0xafb8771e, 0x5f437fed, 0x0bafe2cc,
0x741ccfec, 0xe5ca53a9, 0x6fcb4f74, 0x5e89df27,
0x2a923d14, 0x4b8fdf0c, 0x751f741c, 0x6c1eeffa,
0xefea7fce, 0x6ffc309a, 0xefec3fca, 0x308fdf0a,
0xadf85e7a, 0xaf7daefd, 0x5e7adf0a, 0x5e7aafdd,
0x761f1088, 0x1e7c7efd, 0x3089fffe, 0x4908fb18,
0x5fffdfff, 0xafbbf0f7, 0x4ef85f43, 0xadf81489,
0x7a0f7089, 0xcfef5089, 0x7a0fdf0c, 0x5e7cafed,
0xbc6e780f, 0xefef780f, 0xefef790f, 0xa7f85eeb,
0xffef790f, 0xefef790f, 0x1489df0a, 0x5e7aadfd,
0x5f09fffb, 0xe79aded9, 0xeff96079, 0x607ae79a,
0xded8eff9, 0x60795edb, 0x607acfef, 0xefefefdf,
0xefbfef7f, 0xeeffedff, 0xebffe7ff, 0xafefafdf,
0xafbfaf7f, 0xaeffadff, 0xabffa7ff, 0x6fef6fdf,
0x6fbf6f7f, 0x6eff6dff, 0x6bff67ff, 0x2fef2fdf,
0x2fbf2f7f, 0x2eff2dff, 0x2bff27ff, 0x4e08fd1f,
0xe5ff6e0f, 0xaff87eef, 0x7e0ffdef, 0xf11f6079,
0xabf8f51e, 0x7e0af11c, 0x37cfae16, 0x7fec909a,
0xadf8efdc, 0xcfeae52f, 0x7d0fe12b, 0xf11c6079,
0x7e0a4df8, 0xcfea5ea0, 0x7d0befec, 0xcfea5ea2,
0xe522efdc, 0x5ea2cfda, 0x4e08fd1f, 0x6e0faff8,
0x7c1f761f, 0xfdeff91f, 0x6079abf8, 0x761cee00,
0xf91f2bfb, 0xefefcfec, 0xf91f6079, 0x761c27fb,
0xefdf5e83, 0xcfdc7fdd, 0x50f84bf8, 0x47fd7c1f,
0x761ccfcf, 0x7eef7fed, 0x7dfd70ef, 0xef7e7f1e,
0x771efb18, 0x6079e722, 0xe6bbe5bb, 0x2e66e5bb,
0x600b2ee1, 0xe2bbe2bb, 0xe2bbe2bb, 0x2f5ee2bb,
0xe2bb2ff9, 0x6079e2bb,
};
static ulong patch_2F00[] = {
0x30303030, 0x3e3e3030, 0xaf79b9b3, 0xbaa3b979,
0x9693369f, 0x79f79777, 0x97333fff, 0xfb3b9e9f,
0x79b91d11, 0x9e13f3ff, 0x3f9b6bd9, 0xe173d136,
0x695669d1, 0x697b3daf, 0x79b93a3a, 0x3f979f91,
0x379ff976, 0xf99777fd, 0x9779737d, 0xe9d6bbf9,
0xbfffd9df, 0x97f7fd97, 0x6f7b9bff, 0xf9bd9683,
0x397db973, 0xd97b3b9f, 0xd7f9f733, 0x9993bb9e,
0xe1f9ef93, 0x73773337, 0xb936917d, 0x11f87379,
0xb979d336, 0x8b7ded73, 0x1b7d9337, 0x31f3f22f,
0x3f2327ee, 0xeeeeeeee, 0xeeeeeeee, 0xeeeeeeee,
0xeeeeee4b, 0xf4fbdbd2, 0x58bb1878, 0x577fdfd2,
0xd573b773, 0xf7374b4f, 0xbdbd25b8, 0xb177d2d1,
0x7376856b, 0xbfdd687b, 0xdd2fff8f, 0x78ffff8f,
0xf22f0000,
};
#endif
static void UcodeCopy (volatile cpm8xx_t *cpm)
{
vu_long *p;
int i;
p = (vu_long *)&(cpm->cp_dpmem[0x0000]);
for (i=0; i < sizeof(patch_2000)/4; ++i) {
p[i] = patch_2000[i];
}
p = (vu_long *)&(cpm->cp_dpmem[0x0F00]);
for (i=0; i < sizeof(patch_2F00)/4; ++i) {
p[i] = patch_2F00[i];
}
}
#endif /* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */

1123
arch/powerpc/cpu/mpc8xx/video.c
View File

File diff suppressed because it is too large Load Diff

1
arch/powerpc/cpu/ppc4xx/4xx_uart.c
View File

@ -9,7 +9,6 @@
*/
#include <common.h>
#include <commproc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <watchdog.h>

1
arch/powerpc/cpu/ppc4xx/interrupts.c
View File

@ -22,7 +22,6 @@
#include <asm/interrupt.h>
#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
#include <commproc.h>
DECLARE_GLOBAL_DATA_PTR;

1
arch/powerpc/cpu/ppc4xx/miiphy.c
View File

@ -21,7 +21,6 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <ppc_asm.tmpl>
#include <commproc.h>
#include <asm/ppc4xx.h>
#include <asm/ppc4xx-emac.h>
#include <asm/ppc4xx-mal.h>

1
arch/powerpc/cpu/ppc4xx/uic.c
View File

@ -22,7 +22,6 @@
#include <asm/interrupt.h>
#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
#include <commproc.h>
#if (UIC_MAX > 3)
#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \

1
arch/powerpc/cpu/ppc4xx/xilinx_irq.c
View File

@ -12,7 +12,6 @@
#include <asm/interrupt.h>
#include <asm/ppc4xx.h>
#include <ppc_asm.tmpl>
#include <commproc.h>
#include <asm/io.h>
#include <asm/xilinx_irq.h>

515
arch/powerpc/include/asm/8xx_immap.h
View File

@ -1,515 +0,0 @@
/*
* MPC8xx Internal Memory Map
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
*
* The I/O on the MPC860 is comprised of blocks of special registers
* and the dual port ram for the Communication Processor Module.
* Within this space are functional units such as the SIU, memory
* controller, system timers, and other control functions. It is
* a combination that I found difficult to separate into logical
* functional files.....but anyone else is welcome to try. -- Dan
*/
#ifndef __IMMAP_8XX__
#define __IMMAP_8XX__
/* System configuration registers.
*/
typedef struct sys_conf {
uint sc_siumcr;
uint sc_sypcr;
uint sc_swt;
char res1[2];
ushort sc_swsr;
uint sc_sipend;
uint sc_simask;
uint sc_siel;
uint sc_sivec;
uint sc_tesr;
char res2[0xc];
uint sc_sdcr;
char res3[0x4c];
} sysconf8xx_t;
/* PCMCIA configuration registers.
*/
typedef struct pcmcia_conf {
uint pcmc_pbr0;
uint pcmc_por0;
uint pcmc_pbr1;
uint pcmc_por1;
uint pcmc_pbr2;
uint pcmc_por2;
uint pcmc_pbr3;
uint pcmc_por3;
uint pcmc_pbr4;
uint pcmc_por4;
uint pcmc_pbr5;
uint pcmc_por5;
uint pcmc_pbr6;
uint pcmc_por6;
uint pcmc_pbr7;
uint pcmc_por7;
char res1[0x20];
uint pcmc_pgcra;
uint pcmc_pgcrb;
uint pcmc_pscr;
char res2[4];
uint pcmc_pipr;
char res3[4];
uint pcmc_per;
char res4[4];
} pcmconf8xx_t;
/* Memory controller registers.
*/
typedef struct mem_ctlr {
uint memc_br0;
uint memc_or0;
uint memc_br1;
uint memc_or1;
uint memc_br2;
uint memc_or2;
uint memc_br3;
uint memc_or3;
uint memc_br4;
uint memc_or4;
uint memc_br5;
uint memc_or5;
uint memc_br6;
uint memc_or6;
uint memc_br7;
uint memc_or7;
char res1[0x24];
uint memc_mar;
uint memc_mcr;
char res2[4];
uint memc_mamr;
uint memc_mbmr;
ushort memc_mstat;
ushort memc_mptpr;
uint memc_mdr;
char res3[0x80];
} memctl8xx_t;
/* System Integration Timers.
*/
typedef struct sys_int_timers {
ushort sit_tbscr;
char res0[0x02];
uint sit_tbreff0;
uint sit_tbreff1;
char res1[0x14];
ushort sit_rtcsc;
char res2[0x02];
uint sit_rtc;
uint sit_rtsec;
uint sit_rtcal;
char res3[0x10];
ushort sit_piscr;
char res4[2];
uint sit_pitc;
uint sit_pitr;
char res5[0x34];
} sit8xx_t;
#define TBSCR_TBIRQ_MASK ((ushort)0xff00)
#define TBSCR_REFA ((ushort)0x0080)
#define TBSCR_REFB ((ushort)0x0040)
#define TBSCR_REFAE ((ushort)0x0008)
#define TBSCR_REFBE ((ushort)0x0004)
#define TBSCR_TBF ((ushort)0x0002)
#define TBSCR_TBE ((ushort)0x0001)
#define RTCSC_RTCIRQ_MASK ((ushort)0xff00)
#define RTCSC_SEC ((ushort)0x0080)
#define RTCSC_ALR ((ushort)0x0040)
#define RTCSC_38K ((ushort)0x0010)
#define RTCSC_SIE ((ushort)0x0008)
#define RTCSC_ALE ((ushort)0x0004)
#define RTCSC_RTF ((ushort)0x0002)
#define RTCSC_RTE ((ushort)0x0001)
#define PISCR_PIRQ_MASK ((ushort)0xff00)
#define PISCR_PS ((ushort)0x0080)
#define PISCR_PIE ((ushort)0x0004)
#define PISCR_PTF ((ushort)0x0002)
#define PISCR_PTE ((ushort)0x0001)
/* Clocks and Reset.
*/
typedef struct clk_and_reset {
uint car_sccr;
uint car_plprcr;
uint car_rsr;
char res[0x74]; /* Reserved area */
} car8xx_t;
/* System Integration Timers keys.
*/
typedef struct sitk {
uint sitk_tbscrk;
uint sitk_tbreff0k;
uint sitk_tbreff1k;
uint sitk_tbk;
char res1[0x10];
uint sitk_rtcsck;
uint sitk_rtck;
uint sitk_rtseck;
uint sitk_rtcalk;
char res2[0x10];
uint sitk_piscrk;
uint sitk_pitck;
char res3[0x38];
} sitk8xx_t;
/* Clocks and reset keys.
*/
typedef struct cark {
uint cark_sccrk;
uint cark_plprcrk;
uint cark_rsrk;
char res[0x474];
} cark8xx_t;
/* The key to unlock registers maintained by keep-alive power.
*/
#define KAPWR_KEY ((unsigned int)0x55ccaa33)
/* Video interface. MPC823 Only.
*/
typedef struct vid823 {
ushort vid_vccr;
ushort res1;
u_char vid_vsr;
u_char res2;
u_char vid_vcmr;
u_char res3;
uint vid_vbcb;
uint res4;
uint vid_vfcr0;
uint vid_vfaa0;
uint vid_vfba0;
uint vid_vfcr1;
uint vid_vfaa1;
uint vid_vfba1;
u_char res5[0x18];
} vid823_t;
/* LCD interface. 823 Only.
*/
typedef struct lcd {
uint lcd_lccr;
uint lcd_lchcr;
uint lcd_lcvcr;
char res1[4];
uint lcd_lcfaa;
uint lcd_lcfba;
char lcd_lcsr;
char res2[0x7];
} lcd823_t;
/* I2C
*/
typedef struct i2c {
u_char i2c_i2mod;
char res1[3];
u_char i2c_i2add;
char res2[3];
u_char i2c_i2brg;
char res3[3];
u_char i2c_i2com;
char res4[3];
u_char i2c_i2cer;
char res5[3];
u_char i2c_i2cmr;
char res6[0x8b];
} i2c8xx_t;
/* DMA control/status registers.
*/
typedef struct sdma_csr {
char res1[4];
uint sdma_sdar;
u_char sdma_sdsr;
char res3[3];
u_char sdma_sdmr;
char res4[3];
u_char sdma_idsr1;
char res5[3];
u_char sdma_idmr1;
char res6[3];
u_char sdma_idsr2;
char res7[3];
u_char sdma_idmr2;
char res8[0x13];
} sdma8xx_t;
/* Communication Processor Module Interrupt Controller.
*/
typedef struct cpm_ic {
ushort cpic_civr;
char res[0xe];
uint cpic_cicr;
uint cpic_cipr;
uint cpic_cimr;
uint cpic_cisr;
} cpic8xx_t;
/* Input/Output Port control/status registers.
*/
typedef struct io_port {
ushort iop_padir;
ushort iop_papar;
ushort iop_paodr;
ushort iop_padat;
char res1[8];
ushort iop_pcdir;
ushort iop_pcpar;
ushort iop_pcso;
ushort iop_pcdat;
ushort iop_pcint;
char res2[6];
ushort iop_pddir;
ushort iop_pdpar;
char res3[2];
ushort iop_pddat;
uint utmode;
char res4[4];
} iop8xx_t;
/* Communication Processor Module Timers
*/
typedef struct cpm_timers {
ushort cpmt_tgcr;
char res1[0xe];
ushort cpmt_tmr1;
ushort cpmt_tmr2;
ushort cpmt_trr1;
ushort cpmt_trr2;
ushort cpmt_tcr1;
ushort cpmt_tcr2;
ushort cpmt_tcn1;
ushort cpmt_tcn2;
ushort cpmt_tmr3;
ushort cpmt_tmr4;
ushort cpmt_trr3;
ushort cpmt_trr4;
ushort cpmt_tcr3;
ushort cpmt_tcr4;
ushort cpmt_tcn3;
ushort cpmt_tcn4;
ushort cpmt_ter1;
ushort cpmt_ter2;
ushort cpmt_ter3;
ushort cpmt_ter4;
char res2[8];
} cpmtimer8xx_t;
/* Finally, the Communication Processor stuff.....
*/
typedef struct scc { /* Serial communication channels */
uint scc_gsmrl;
uint scc_gsmrh;
ushort scc_psmr;
char res1[2];
ushort scc_todr;
ushort scc_dsr;
ushort scc_scce;
char res2[2];
ushort scc_sccm;
char res3;
u_char scc_sccs;
char res4[8];
} scc_t;
typedef struct smc { /* Serial management channels */
char res1[2];
ushort smc_smcmr;
char res2[2];
u_char smc_smce;
char res3[3];
u_char smc_smcm;
char res4[5];
} smc_t;
/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but
* it fits within the address space.
*/
typedef struct fec {
uint fec_addr_low; /* lower 32 bits of station address */
ushort fec_addr_high; /* upper 16 bits of station address */
ushort res1; /* reserved */
uint fec_hash_table_high; /* upper 32-bits of hash table */
uint fec_hash_table_low; /* lower 32-bits of hash table */
uint fec_r_des_start; /* beginning of Rx descriptor ring */
uint fec_x_des_start; /* beginning of Tx descriptor ring */
uint fec_r_buff_size; /* Rx buffer size */
uint res2[9]; /* reserved */
uint fec_ecntrl; /* ethernet control register */
uint fec_ievent; /* interrupt event register */
uint fec_imask; /* interrupt mask register */
uint fec_ivec; /* interrupt level and vector status */
uint fec_r_des_active; /* Rx ring updated flag */
uint fec_x_des_active; /* Tx ring updated flag */
uint res3[10]; /* reserved */
uint fec_mii_data; /* MII data register */
uint fec_mii_speed; /* MII speed control register */
uint res4[17]; /* reserved */
uint fec_r_bound; /* end of RAM (read-only) */
uint fec_r_fstart; /* Rx FIFO start address */
uint res5[6]; /* reserved */
uint fec_x_fstart; /* Tx FIFO start address */
uint res6[17]; /* reserved */
uint fec_fun_code; /* fec SDMA function code */
uint res7[3]; /* reserved */
uint fec_r_cntrl; /* Rx control register */
uint fec_r_hash; /* Rx hash register */
uint res8[14]; /* reserved */
uint fec_x_cntrl; /* Tx control register */
uint res9[0x1e]; /* reserved */
} fec_t;
/* The FEC and LCD color map share the same address space....
* I guess we will never see an 823T :-).
*/
union fec_lcd {
fec_t fl_un_fec;
u_char fl_un_cmap[0x200];
};
typedef struct comm_proc {
/* General control and status registers.
*/
ushort cp_cpcr;
u_char res1[2];
ushort cp_rccr;
u_char res2;
u_char cp_rmds;
u_char res3[4];
ushort cp_cpmcr1;
ushort cp_cpmcr2;
ushort cp_cpmcr3;
ushort cp_cpmcr4;
u_char res4[2];
ushort cp_rter;
u_char res5[2];
ushort cp_rtmr;
u_char res6[0x14];
/* Baud rate generators.
*/
uint cp_brgc1;
uint cp_brgc2;
uint cp_brgc3;
uint cp_brgc4;
/* Serial Communication Channels.
*/
scc_t cp_scc[4];
/* Serial Management Channels.
*/
smc_t cp_smc[2];
/* Serial Peripheral Interface.
*/
ushort cp_spmode;
u_char res7[4];
u_char cp_spie;
u_char res8[3];
u_char cp_spim;
u_char res9[2];
u_char cp_spcom;
u_char res10[2];
/* Parallel Interface Port.
*/
u_char res11[2];
ushort cp_pipc;
u_char res12[2];
ushort cp_ptpr;
uint cp_pbdir;
uint cp_pbpar;
u_char res13[2];
ushort cp_pbodr;
uint cp_pbdat;
/* Port E - MPC87x/88x only.
*/
uint cp_pedir;
uint cp_pepar;
uint cp_peso;
uint cp_peodr;
uint cp_pedat;
/* Communications Processor Timing Register -
Contains RMII Timing for the FECs on MPC87x/88x only.
*/
uint cp_cptr;
/* Serial Interface and Time Slot Assignment.
*/
uint cp_simode;
u_char cp_sigmr;
u_char res15;
u_char cp_sistr;
u_char cp_sicmr;
u_char res16[4];
uint cp_sicr;
uint cp_sirp;
u_char res17[0xc];
/* 256 bytes of MPC823 video controller RAM array.
*/
u_char cp_vcram[0x100];
u_char cp_siram[0x200];
/* The fast ethernet controller is not really part of the CPM,
* but it resides in the address space.
* The LCD color map is also here.
*/
union fec_lcd fl_un;
#define cp_fec fl_un.fl_un_fec
#define lcd_cmap fl_un.fl_un_cmap
char res18[0xE00];
/* The MPC885 family has a second FEC here */
fec_t cp_fec2;
#define cp_fec1 cp_fec /* consistency macro */
/* Dual Ported RAM follows.
* There are many different formats for this memory area
* depending upon the devices used and options chosen.
* Some processors don't have all of it populated.
*/
u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */
/* Parameter RAM */
union {
u_char cp_dparam[0x400];
u16 cp_dparam16[0x200];
};
} cpm8xx_t;
/* Internal memory map.
*/
typedef struct immap {
sysconf8xx_t im_siu_conf; /* SIU Configuration */
pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */
memctl8xx_t im_memctl; /* Memory Controller */
sit8xx_t im_sit; /* System integration timers */
car8xx_t im_clkrst; /* Clocks and reset */
sitk8xx_t im_sitk; /* Sys int timer keys */
cark8xx_t im_clkrstk; /* Clocks and reset keys */
vid823_t im_vid; /* Video (823 only) */
lcd823_t im_lcd; /* LCD (823 only) */
i2c8xx_t im_i2c; /* I2C control/status */
sdma8xx_t im_sdma; /* SDMA control/status */
cpic8xx_t im_cpic; /* CPM Interrupt Controller */
iop8xx_t im_ioport; /* IO Port control/status */
cpmtimer8xx_t im_cpmtimer; /* CPM timers */
cpm8xx_t im_cpm; /* Communication processor */
} immap_t;
#endif /* __IMMAP_8XX__ */

41
arch/powerpc/include/asm/cache.h
View File

@ -7,9 +7,7 @@
#include <asm/processor.h>
/* bytes per L1 cache line */
#if defined(CONFIG_8xx)
#define L1_CACHE_SHIFT 4
#elif defined(CONFIG_PPC64BRIDGE)
#if defined(CONFIG_PPC64BRIDGE)
#define L1_CACHE_SHIFT 7
#elif defined(CONFIG_E500MC)
#define L1_CACHE_SHIFT 6
@ -72,41 +70,4 @@ void disable_cpc_sram(void);
#define L2CACHE_NONE 0x03 /* NONE */
#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */
#ifdef CONFIG_8xx
/* Cache control on the MPC8xx is provided through some additional
* special purpose registers.
*/
#define IC_CST 560 /* Instruction cache control/status */
#define IC_ADR 561 /* Address needed for some commands */
#define IC_DAT 562 /* Read-only data register */
#define DC_CST 568 /* Data cache control/status */
#define DC_ADR 569 /* Address needed for some commands */
#define DC_DAT 570 /* Read-only data register */
/* Commands. Only the first few are available to the instruction cache.
*/
#define IDC_ENABLE 0x02000000 /* Cache enable */
#define IDC_DISABLE 0x04000000 /* Cache disable */
#define IDC_LDLCK 0x06000000 /* Load and lock */
#define IDC_UNLINE 0x08000000 /* Unlock line */
#define IDC_UNALL 0x0a000000 /* Unlock all */
#define IDC_INVALL 0x0c000000 /* Invalidate all */
#define DC_FLINE 0x0e000000 /* Flush data cache line */
#define DC_SFWT 0x01000000 /* Set forced writethrough mode */
#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
#define DC_SLES 0x05000000 /* Set little endian swap mode */
#define DC_CLES 0x07000000 /* Clear little endian swap mode */
/* Status.
*/
#define IDC_ENABLED 0x80000000 /* Cache is enabled */
#define IDC_CERR1 0x00200000 /* Cache error 1 */
#define IDC_CERR2 0x00100000 /* Cache error 2 */
#define IDC_CERR3 0x00080000 /* Cache error 3 */
#define DC_DFWT 0x40000000 /* Data cache is forced write through */
#define DC_LES 0x20000000 /* Caches are little endian mode */
#endif /* CONFIG_8xx */
#endif

3
arch/powerpc/include/asm/global_data.h
View File

@ -19,9 +19,6 @@ struct arch_global_data {
u8 sdhc_adapter;
#endif
#endif
#if defined(CONFIG_8xx)
unsigned long brg_clk;
#endif
#if defined(CONFIG_CPM2)
/* There are many clocks on the MPC8260 - see page 9-5 */
unsigned long vco_out;

379
arch/powerpc/include/asm/iopin_8xx.h
View File

@ -1,379 +0,0 @@
/*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* MPC8xx I/O port pin manipulation functions
* Roughly based on iopin_8260.h
*/
#ifndef _ASM_IOPIN_8XX_H_
#define _ASM_IOPIN_8XX_H_
#include <linux/types.h>
#include <asm/8xx_immap.h>
#ifdef __KERNEL__
typedef struct {
u_char port:2; /* port number (A=0, B=1, C=2, D=3) */
u_char pin:5; /* port pin (0-31) */
u_char flag:1; /* for whatever */
} iopin_t;
#define IOPIN_PORTA 0
#define IOPIN_PORTB 1
#define IOPIN_PORTC 2
#define IOPIN_PORTD 3
static __inline__ void
iopin_set_high(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
*datp |= (1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
*datp |= (1 << (31 - iopin->pin));
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
*datp |= (1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
*datp |= (1 << (15 - iopin->pin));
}
}
static __inline__ void
iopin_set_low(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
*datp &= ~(1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
*datp &= ~(1 << (31 - iopin->pin));
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
*datp &= ~(1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
*datp &= ~(1 << (15 - iopin->pin));
}
}
static __inline__ uint
iopin_is_high(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
return (*datp >> (15 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
return (*datp >> (31 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
return (*datp >> (15 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
return (*datp >> (15 - iopin->pin)) & 1;
}
return 0;
}
static __inline__ uint
iopin_is_low(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat;
return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat;
return ((*datp >> (31 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat;
return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *datp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat;
return ((*datp >> (15 - iopin->pin)) & 1) ^ 1;
}
return 0;
}
static __inline__ void
iopin_set_out(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
*dirp |= (1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
*dirp |= (1 << (31 - iopin->pin));
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
*dirp |= (1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
*dirp |= (1 << (15 - iopin->pin));
}
}
static __inline__ void
iopin_set_in(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
*dirp &= ~(1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
*dirp &= ~(1 << (31 - iopin->pin));
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
*dirp &= ~(1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
*dirp &= ~(1 << (15 - iopin->pin));
}
}
static __inline__ uint
iopin_is_out(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
return (*dirp >> (15 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
return (*dirp >> (31 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
return (*dirp >> (15 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
return (*dirp >> (15 - iopin->pin)) & 1;
}
return 0;
}
static __inline__ uint
iopin_is_in(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padir;
return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdir;
return ((*dirp >> (31 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdir;
return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *dirp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir;
return ((*dirp >> (15 - iopin->pin)) & 1) ^ 1;
}
return 0;
}
static __inline__ void
iopin_set_odr(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
*odrp |= (1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTB) {
volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
*odrp |= (1 << (31 - iopin->pin));
}
}
static __inline__ void
iopin_set_act(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
*odrp &= ~(1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTB) {
volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
*odrp &= ~(1 << (31 - iopin->pin));
}
}
static __inline__ uint
iopin_is_odr(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
return (*odrp >> (15 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTB) {
volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
return (*odrp >> (31 - iopin->pin)) & 1;
}
return 0;
}
static __inline__ uint
iopin_is_act(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_paodr;
return ((*odrp >> (15 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTB) {
volatile ushort *odrp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbodr;
return ((*odrp >> (31 - iopin->pin)) & 1) ^ 1;
}
return 0;
}
static __inline__ void
iopin_set_ded(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
*parp |= (1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
*parp |= (1 << (31 - iopin->pin));
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
*parp |= (1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
*parp |= (1 << (15 - iopin->pin));
}
}
static __inline__ void
iopin_set_gen(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
*parp &= ~(1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
*parp &= ~(1 << (31 - iopin->pin));
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
*parp &= ~(1 << (15 - iopin->pin));
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
*parp &= ~(1 << (15 - iopin->pin));
}
}
static __inline__ uint
iopin_is_ded(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
return (*parp >> (15 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
return (*parp >> (31 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
return (*parp >> (15 - iopin->pin)) & 1;
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
return (*parp >> (15 - iopin->pin)) & 1;
}
return 0;
}
static __inline__ uint
iopin_is_gen(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTA) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_papar;
return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTB) {
volatile uint *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbpar;
return ((*parp >> (31 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTC) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcpar;
return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
} else if (iopin->port == IOPIN_PORTD) {
volatile ushort *parp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar;
return ((*parp >> (15 - iopin->pin)) & 1) ^ 1;
}
return 0;
}
static __inline__ void
iopin_set_opt2(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTC) {
volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
*sorp |= (1 << (15 - iopin->pin));
}
}
static __inline__ void
iopin_set_opt1(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTC) {
volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
*sorp &= ~(1 << (15 - iopin->pin));
}
}
static __inline__ uint
iopin_is_opt2(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTC) {
volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
return (*sorp >> (15 - iopin->pin)) & 1;
}
return 0;
}
static __inline__ uint
iopin_is_opt1(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTC) {
volatile ushort *sorp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcso;
return ((*sorp >> (15 - iopin->pin)) & 1) ^ 1;
}
return 0;
}
static __inline__ void
iopin_set_falledge(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTC) {
volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
*intp |= (1 << (15 - iopin->pin));
}
}
static __inline__ void
iopin_set_anyedge(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTC) {
volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
*intp &= ~(1 << (15 - iopin->pin));
}
}
static __inline__ uint
iopin_is_falledge(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTC) {
volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
return (*intp >> (15 - iopin->pin)) & 1;
}
return 0;
}
static __inline__ uint
iopin_is_anyedge(iopin_t *iopin)
{
if (iopin->port == IOPIN_PORTC) {
volatile ushort *intp = &((immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcint;
return ((*intp >> (15 - iopin->pin)) & 1) ^ 1;
}
return 0;
}
#endif /* __KERNEL__ */
#endif /* _ASM_IOPIN_8XX_H_ */

38
arch/powerpc/include/asm/ppc.h
View File

@ -13,19 +13,7 @@
#ifndef __ASSEMBLY__
#if defined(CONFIG_8xx)
#include <asm/8xx_immap.h>
#if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
defined(CONFIG_MPC866) || defined(CONFIG_MPC866P)
# define CONFIG_MPC866_FAMILY 1
#elif defined(CONFIG_MPC885)
# define CONFIG_MPC885_FAMILY 1
#endif
#if defined(CONFIG_MPC860) || defined(CONFIG_MPC860T) || \
defined(CONFIG_MPC866_FAMILY) || defined(CONFIG_MPC885_FAMILY)
# define CONFIG_MPC86x 1
#endif
#elif defined(CONFIG_5xx)
#if defined(CONFIG_5xx)
#include <asm/5xx_immap.h>
#elif defined(CONFIG_MPC5xxx)
#include <mpc5xxx.h>
@ -62,29 +50,7 @@
#include <asm/arch/immap_lsch2.h>
#endif
/*
* enable common handling for all TQM8xxL/M boards:
* - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
* - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
* and for the TQM885D board
*/
#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
# ifndef CONFIG_TQM8xxM
# define CONFIG_TQM8xxM
# endif
#endif
#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
defined(CONFIG_TQM885D)
# ifndef CONFIG_TQM8xxL
# define CONFIG_TQM8xxL
# endif
#endif
#if defined(CONFIG_5xx) || defined(CONFIG_8xx)
#if defined(CONFIG_5xx)
uint get_immr(uint);
#endif
#if defined(CONFIG_MPC5xxx)

5
arch/powerpc/include/asm/processor.h
View File

@ -1361,10 +1361,7 @@ int prt_8260_clks(void);
#endif /* ndef ASSEMBLY*/
#ifdef CONFIG_MACH_SPECIFIC
#if defined(CONFIG_8xx)
#define _machine _MACH_8xx
#define have_of 0
#elif defined(CONFIG_WALNUT)
#if defined(CONFIG_WALNUT)
#define _machine _MACH_walnut
#define have_of 0
#elif defined(CONFIG_MPC8260)

4
arch/powerpc/include/asm/status_led.h
View File

@ -9,9 +9,7 @@
/* if not overridden */
#ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC
# if defined(CONFIG_8xx)
# include <mpc8xx.h>
# elif defined(CONFIG_MPC8260)
# if defined(CONFIG_MPC8260)
# include <mpc8260.h>
# elif defined(CONFIG_5xx)
# include <mpc5xx.h>

1
arch/powerpc/lib/Makefile
View File

@ -36,7 +36,6 @@ obj-y += extable.o
obj-$(CONFIG_CMD_IMMAP) += immap.o
obj-y += interrupts.o
obj-$(CONFIG_CMD_KGDB) += kgdb.o
obj-$(CONFIG_IDE) += ide.o
obj-y += stack.o
obj-y += time.o

184
arch/powerpc/lib/ide.c
View File

@ -1,184 +0,0 @@
/*
* (C) Copyright 2000-2011
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* Code taken from cmd_ide.c */
#include <common.h>
#include <ata.h>
#include "ide.h"
#ifdef CONFIG_IDE_8xx_DIRECT
#include <mpc8xx.h>
#include <pcmcia.h>
DECLARE_GLOBAL_DATA_PTR;
/* Timings for IDE Interface
*
* SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
* 70 165 30 PIO-Mode 0, [ns]
* 4 9 2 [Cycles]
* 50 125 20 PIO-Mode 1, [ns]
* 3 7 2 [Cycles]
* 30 100 15 PIO-Mode 2, [ns]
* 2 6 1 [Cycles]
* 30 80 10 PIO-Mode 3, [ns]
* 2 5 1 [Cycles]
* 25 70 10 PIO-Mode 4, [ns]
* 2 4 1 [Cycles]
*/
static const pio_config_t pio_config_ns[IDE_MAX_PIO_MODE+1] = {
/* Setup Length Hold */
{ 70, 165, 30 }, /* PIO-Mode 0, [ns] */
{ 50, 125, 20 }, /* PIO-Mode 1, [ns] */
{ 30, 101, 15 }, /* PIO-Mode 2, [ns] */
{ 30, 80, 10 }, /* PIO-Mode 3, [ns] */
{ 25, 70, 10 }, /* PIO-Mode 4, [ns] */
};
static pio_config_t pio_config_clk[IDE_MAX_PIO_MODE+1];
#ifndef CONFIG_SYS_PIO_MODE
#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */
#endif
static int pio_mode = CONFIG_SYS_PIO_MODE;
/* Make clock cycles and always round up */
#define PCMCIA_MK_CLKS(t, T) (((t) * (T) + 999U) / 1000U)
static void set_pcmcia_timing(int pmode)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
ulong timings;
debug("Set timing for PIO Mode %d\n", pmode);
timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold)
| PCMCIA_SST(pio_config_clk[pmode].t_setup)
| PCMCIA_SL(pio_config_clk[pmode].t_length);
/*
* IDE 0
*/
pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
#if (CONFIG_SYS_PCMCIA_POR0 != 0)
pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 | timings;
#else
pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0;
#endif
debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
#if (CONFIG_SYS_PCMCIA_POR1 != 0)
pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 | timings;
#else
pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1;
#endif
debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
#if (CONFIG_SYS_PCMCIA_POR2 != 0)
pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 | timings;
#else
pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2;
#endif
debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
#if (CONFIG_SYS_PCMCIA_POR3 != 0)
pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 | timings;
#else
pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3;
#endif
debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3);
/*
* IDE 1
*/
pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
#if (CONFIG_SYS_PCMCIA_POR4 != 0)
pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 | timings;
#else
pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4;
#endif
debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
#if (CONFIG_SYS_PCMCIA_POR5 != 0)
pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 | timings;
#else
pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5;
#endif
debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
#if (CONFIG_SYS_PCMCIA_POR6 != 0)
pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 | timings;
#else
pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6;
#endif
debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
#if (CONFIG_SYS_PCMCIA_POR7 != 0)
pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 | timings;
#else
pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7;
#endif
debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7);
}
int ide_preinit(void)
{
int i;
/* Initialize PIO timing tables */
for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) {
pio_config_clk[i].t_setup =
PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk);
pio_config_clk[i].t_length =
PCMCIA_MK_CLKS(pio_config_ns[i].t_length, gd->bus_clk);
pio_config_clk[i].t_hold =
PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk);
debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk"
" hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup,
pio_config_clk[i].t_setup, pio_config_ns[i].t_length,
pio_config_clk[i].t_length, pio_config_ns[i].t_hold,
pio_config_clk[i].t_hold);
}
return 0;
}
int ide_init_postreset(void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
/* PCMCIA / IDE initialization for common mem space */
pcmp->pcmc_pgcrb = 0;
/* start in PIO mode 0 - most relaxed timings */
pio_mode = 0;
set_pcmcia_timing(pio_mode);
return 0;
}
#endif /* CONFIG_IDE_8xx_DIRECT */
#ifdef CONFIG_IDE_8xx_PCCARD
int ide_preinit(void)
{
ide_devices_found = 0;
/* initialize the PCMCIA IDE adapter card */
pcmcia_on();
if (!ide_devices_found)
return 1;
udelay(1000000);/* 1 s */
return 0;
}
#endif

15
arch/powerpc/lib/ide.h
View File

@ -1,15 +0,0 @@
/*
* (C) Copyright 2012
* Pavel Herrmann <morpheus.ibis@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _MPC8XX_IDE_H_
#define _MPC8XX_IDE_H_ 1
#ifdef CONFIG_IDE_8xx_PCCARD
int pcmcia_on(void);
extern int ide_devices_found;
#endif
#endif

106
arch/powerpc/lib/immap.c
View File

@ -12,17 +12,11 @@
#include <common.h>
#include <command.h>
#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
#if defined(CONFIG_8xx)
#include <asm/8xx_immap.h>
#include <commproc.h>
#include <asm/iopin_8xx.h>
#elif defined(CONFIG_MPC8260)
#include <asm/immap_8260.h>
#include <asm/cpm_8260.h>
#include <asm/iopin_8260.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
@ -38,19 +32,12 @@ do_siuinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#if defined(CONFIG_8xx)
volatile sysconf8xx_t *sc = &immap->im_siu_conf;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
volatile sysconf8260_t *sc = &immap->im_siu_conf;
#endif
printf ("SIUMCR= %08x SYPCR = %08x\n", sc->sc_siumcr, sc->sc_sypcr);
#if defined(CONFIG_8xx)
printf ("SWT = %08x\n", sc->sc_swt);
printf ("SIPEND= %08x SIMASK= %08x\n", sc->sc_sipend, sc->sc_simask);
printf ("SIEL = %08x SIVEC = %08x\n", sc->sc_siel, sc->sc_sivec);
printf ("TESR = %08x SDCR = %08x\n", sc->sc_tesr, sc->sc_sdcr);
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
printf ("BCR = %08x\n", sc->sc_bcr);
printf ("P_ACR = %02x P_ALRH= %08x P_ALRL= %08x\n",
sc->sc_ppc_acr, sc->sc_ppc_alrh, sc->sc_ppc_alrl);
@ -69,10 +56,7 @@ do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#if defined(CONFIG_8xx)
volatile memctl8xx_t *memctl = &immap->im_memctl;
int nbanks = 8;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
volatile memctl8260_t *memctl = &immap->im_memctl;
int nbanks = 12;
#endif
@ -90,16 +74,12 @@ do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
printf ("MAR = %08x", memctl->memc_mar);
#if defined(CONFIG_8xx)
printf (" MCR = %08x\n", memctl->memc_mcr);
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
putc ('\n');
#endif
printf ("MAMR = %08x MBMR = %08x",
memctl->memc_mamr, memctl->memc_mbmr);
#if defined(CONFIG_8xx)
printf ("\nMSTAT = %04x\n", memctl->memc_mstat);
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
printf (" MCMR = %08x\n", memctl->memc_mcmr);
#endif
printf ("MPTPR = %04x MDR = %08x\n",
@ -137,17 +117,11 @@ do_carinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#if defined(CONFIG_8xx)
volatile car8xx_t *car = &immap->im_clkrst;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
volatile car8260_t *car = &immap->im_clkrst;
#endif
#if defined(CONFIG_8xx)
printf ("SCCR = %08x\n", car->car_sccr);
printf ("PLPRCR= %08x\n", car->car_plprcr);
printf ("RSR = %08x\n", car->car_rsr);
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
printf ("SCCR = %08x\n", car->car_sccr);
printf ("SCMR = %08x\n", car->car_scmr);
printf ("RSR = %08x\n", car->car_rsr);
@ -200,14 +174,7 @@ static void binary (char *label, uint value, int nbits)
putc ('\n');
}
#if defined(CONFIG_8xx)
#define PA_NBITS 16
#define PA_NB_ODR 8
#define PB_NBITS 18
#define PB_NB_ODR 16
#define PC_NBITS 12
#define PD_NBITS 13
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
#define PA_NBITS 32
#define PA_NB_ODR 32
#define PB_NBITS 28
@ -221,10 +188,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#if defined(CONFIG_8xx)
volatile iop8xx_t *iop = &immap->im_ioport;
volatile ushort *l, *r;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
volatile iop8260_t *iop = &immap->im_ioport;
volatile uint *l, *r;
#endif
@ -237,10 +201,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
* Ports A & B
*/
#if defined(CONFIG_8xx)
l = &iop->iop_padir;
R = &immap->im_cpm.cp_pbdir;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
l = &iop->iop_pdira;
R = &iop->iop_pdirb;
#endif
@ -263,10 +224,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
* Ports C & D
*/
#if defined(CONFIG_8xx)
l = &iop->iop_pcdir;
r = &iop->iop_pddir;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
l = &iop->iop_pdirc;
r = &iop->iop_pdird;
#endif
@ -274,11 +232,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
binary ("PD_DIR", *r++, PD_NBITS);
binary ("PC_PAR", *l++, PC_NBITS);
binary ("PD_PAR", *r++, PD_NBITS);
#if defined(CONFIG_8xx)
binary ("PC_SO ", *l++, PC_NBITS);
binary (" ", 0, 0);
r++;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
binary ("PC_SOR", *l++, PC_NBITS);
binary ("PD_SOR", *r++, PD_NBITS);
binary ("PC_ODR", *l++, PC_NBITS);
@ -286,9 +240,6 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#endif
binary ("PC_DAT", *l++, PC_NBITS);
binary ("PD_DAT", *r++, PD_NBITS);
#if defined(CONFIG_8xx)
binary ("PC_INT", *l++, PC_NBITS);
#endif
header ();
return 0;
@ -313,9 +264,6 @@ do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
SOR,
ODR,
DAT,
#if defined(CONFIG_8xx)
INT
#endif
} cmd = DAT;
if (argc != 5) {
@ -350,11 +298,6 @@ do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
case 's':
cmd = SOR;
break;
#if defined(CONFIG_8xx)
case 'i':
cmd = INT;
break;
#endif
default:
printf ("iopset: unknown command %s\n", argv[3]);
rcode = 1;
@ -400,14 +343,6 @@ do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
else
iopin_set_low (&iopin);
break;
#if defined(CONFIG_8xx)
case INT:
if (value)
iopin_set_falledge (&iopin);
else
iopin_set_anyedge (&iopin);
break;
#endif
}
}
@ -434,9 +369,7 @@ static void prbrg (int n, uint val)
uint cd = (val & CPM_BRG_CD_MASK) >> 1;
uint div16 = (val & CPM_BRG_DIV16) != 0;
#if defined(CONFIG_8xx)
ulong clock = gd->cpu_clk;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
ulong clock = gd->arch.brg_clk;
#endif
@ -486,10 +419,7 @@ do_brginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#if defined(CONFIG_8xx)
volatile cpm8xx_t *cp = &immap->im_cpm;
volatile uint *p = &cp->cp_brgc1;
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
volatile uint *p = &immap->im_brgc1;
#endif
int i = 1;
@ -510,11 +440,7 @@ do_i2cinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
#if defined(CONFIG_8xx)
volatile i2c8xx_t *i2c = &immap->im_i2c;
volatile cpm8xx_t *cp = &immap->im_cpm;
volatile iic_t *iip = (iic_t *) & cp->cp_dparam[PROFF_IIC];
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8260)
volatile i2c8260_t *i2c = &immap->im_i2c;
volatile iic_t *iip;
uint dpaddr;

4
arch/powerpc/lib/time.c
View File

@ -64,7 +64,7 @@ int timer_init(void)
{
unsigned long temp;
#if defined(CONFIG_5xx) || defined(CONFIG_8xx)
#if defined(CONFIG_5xx)
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
/* unlock */
@ -75,7 +75,7 @@ int timer_init(void)
asm volatile("li %0,0 ; mttbu %0 ; mttbl %0;"
: "=&r"(temp) );
#if defined(CONFIG_5xx) || defined(CONFIG_8xx)
#if defined(CONFIG_5xx)
/* enable */
immap->im_sit.sit_tbscr |= TBSCR_TBE;
#endif

155
board/tqc/tqm8xx/Kconfig
View File

@ -1,155 +0,0 @@
if TARGET_TQM823L
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM823L"
endif
if TARGET_TQM823M
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM823M"
endif
if TARGET_TQM850L
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM850L"
endif
if TARGET_TQM850M
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM850M"
endif
if TARGET_TQM855L
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM855L"
endif
if TARGET_TQM855M
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM855M"
endif
if TARGET_TQM860L
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM860L"
endif
if TARGET_TQM860M
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM860M"
endif
if TARGET_TQM862L
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM862L"
endif
if TARGET_TQM862M
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM862M"
endif
if TARGET_TQM866M
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM866M"
endif
if TARGET_TQM885D
config SYS_BOARD
default "tqm8xx"
config SYS_VENDOR
default "tqc"
config SYS_CONFIG_NAME
default "TQM885D"
endif

31
board/tqc/tqm8xx/MAINTAINERS
View File

@ -1,31 +0,0 @@
TQM8XX BOARD
M: Wolfgang Denk <wd@denx.de>
S: Maintained
F: board/tqc/tqm8xx/
F: include/configs/TQM823L.h
F: configs/TQM823L_defconfig
F: configs/TQM823L_LCD_defconfig
F: include/configs/TQM823M.h
F: configs/TQM823M_defconfig
F: include/configs/TQM850L.h
F: configs/TQM850L_defconfig
F: include/configs/TQM850M.h
F: configs/TQM850M_defconfig
F: include/configs/TQM855L.h
F: configs/TQM855L_defconfig
F: include/configs/TQM855M.h
F: configs/TQM855M_defconfig
F: include/configs/TQM860L.h
F: configs/TQM860L_defconfig
F: include/configs/TQM860M.h
F: configs/TQM860M_defconfig
F: include/configs/TQM862L.h
F: configs/TQM862L_defconfig
F: include/configs/TQM862M.h
F: configs/TQM862M_defconfig
F: include/configs/TQM866M.h
F: configs/TQM866M_defconfig
F: include/configs/TQM885D.h
F: configs/TQM885D_defconfig
F: configs/TTTech_defconfig
F: configs/wtk_defconfig

8
board/tqc/tqm8xx/Makefile
View File

@ -1,8 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y = tqm8xx.o load_sernum_ethaddr.o

89
board/tqc/tqm8xx/load_sernum_ethaddr.c
View File

@ -1,89 +0,0 @@
/*
* (C) Copyright 2000, 2001, 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8xx.h>
/*-----------------------------------------------------------------------
* Process Hardware Information Block:
*
* If we boot on a system fresh from factory, check if the Hardware
* Information Block exists and save the information it contains.
*
* The TQM8xxL / TQM82xx Hardware Information Block is defined as
* follows:
* - located in first flash bank
* - starts at offset 0x0003FFC0
* - size 0x00000040
*
* Internal structure:
* - sequence of ASCII character strings
* - fields separated by a single space character (0x20)
* - last field terminated by NUL character (0x00)
* - remaining space filled with NUL characters (0x00)
*
* Fields in Hardware Information Block:
* 1) Module Type
* 2) Serial Number
* 3) First MAC Address
* 4) Number of additional MAC addresses
*/
void load_sernum_ethaddr (void)
{
unsigned char *hwi;
unsigned char serial [CONFIG_SYS_HWINFO_SIZE];
unsigned char ethaddr[CONFIG_SYS_HWINFO_SIZE];
unsigned short ih, is, ie, part;
hwi = (unsigned char *)(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_HWINFO_OFFSET);
ih = is = ie = 0;
if (*((unsigned long *)hwi) != (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
return;
}
part = 1;
/* copy serial # / MAC address */
while ((hwi[ih] != '\0') && (ih < CONFIG_SYS_HWINFO_SIZE)) {
if (hwi[ih] < ' ' || hwi[ih] > '~') { /* ASCII strings! */
return;
}
switch (part) {
default: /* Copy serial # */
if (hwi[ih] == ' ') {
++part;
}
serial[is++] = hwi[ih];
break;
case 3: /* Copy MAC address */
if (hwi[ih] == ' ') {
++part;
break;
}
ethaddr[ie++] = hwi[ih];
if ((ie % 3) == 2)
ethaddr[ie++] = ':';
break;
}
++ih;
}
serial[is] = '\0';
if (ie && ethaddr[ie-1] == ':')
--ie;
ethaddr[ie] = '\0';
/* set serial# and ethaddr if not yet defined */
if (getenv("serial#") == NULL) {
setenv ((char *)"serial#", (char *)serial);
}
if (getenv("ethaddr") == NULL) {
setenv ((char *)"ethaddr", (char *)ethaddr);
}
}

677
board/tqc/tqm8xx/tqm8xx.c
View File

@ -1,677 +0,0 @@
/*
* (C) Copyright 2000-2008
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <hwconfig.h>
#include <mpc8xx.h>
#ifdef CONFIG_PS2MULT
#include <ps2mult.h>
#endif
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
extern flash_info_t flash_info[]; /* FLASH chips info */
DECLARE_GLOBAL_DATA_PTR;
static long int dram_size (long int, long int *, long int);
#define _NOT_USED_ 0xFFFFFFFF
/* UPM initialization table for SDRAM: 40, 50, 66 MHz CLKOUT @ CAS latency 2, tWR=2 */
const uint sdram_table[] =
{
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
0x1FF5FC47, /* last */
/*
* SDRAM Initialization (offset 5 in UPMA RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x1F0DFC04, 0xEEABBC00, 0x11B77C04, 0xEFFAFC44,
0x1FF5FC47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
0xF0AFFC00, 0xF0AFFC04, 0xE1BAFC44, 0x1FF5FC47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
0xFFFFFC84, 0xFFFFFC07, /* last */
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0xFFFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*
* Test TQ ID string (TQM8xx...)
* If present, check for "L" type (no second DRAM bank),
* otherwise "L" type is assumed as default.
*
* Set board_type to 'L' for "L" type, 'M' for "M" type, 0 else.
*/
int checkboard (void)
{
char buf[64];
int i;
int l = getenv_f("serial#", buf, sizeof(buf));
puts ("Board: ");
if (l < 0 || strncmp(buf, "TQM8", 4)) {
puts ("### No HW ID - assuming TQM8xxL\n");
return (0);
}
if ((buf[6] == 'L')) { /* a TQM8xxL type */
gd->board_type = 'L';
}
if ((buf[6] == 'M')) { /* a TQM8xxM type */
gd->board_type = 'M';
}
if ((buf[6] == 'D')) { /* a TQM885D type */
gd->board_type = 'D';
}
for (i = 0; i < l; ++i) {
if (buf[i] == ' ')
break;
putc (buf[i]);
}
putc ('\n');
return (0);
}
/* ------------------------------------------------------------------------- */
int dram_init(void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size8, size9, size10;
long int size_b0 = 0;
long int size_b1 = 0;
int board_type = gd->board_type;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
/*
* The following value is used as an address (i.e. opcode) for
* the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
* the port size is 32bit the SDRAM does NOT "see" the lower two
* address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
* MICRON SDRAMs:
* -> 0 00 010 0 010
* | | | | +- Burst Length = 4
* | | | +----- Burst Type = Sequential
* | | +------- CAS Latency = 2
* | +----------- Operating Mode = Standard
* +-------------- Write Burst Mode = Programmed Burst Length
*/
memctl->memc_mar = 0x00000088;
/*
* Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
* preliminary addresses - these have to be modified after the
* SDRAM size has been determined.
*/
memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
#ifndef CONFIG_CAN_DRIVER
if ((board_type != 'L') &&
(board_type != 'M') &&
(board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
}
#endif /* CONFIG_CAN_DRIVER */
memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
udelay (1);
memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */
udelay (1);
#ifndef CONFIG_CAN_DRIVER
if ((board_type != 'L') &&
(board_type != 'M') &&
(board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */
udelay (1);
memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */
udelay (1);
}
#endif /* CONFIG_CAN_DRIVER */
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
/*
* Check Bank 0 Memory Size for re-configuration
*
* try 8 column mode
*/
size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size8 >> 20);
udelay (1000);
/*
* try 9 column mode
*/
size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size9 >> 20);
udelay(1000);
#if defined(CONFIG_SYS_MAMR_10COL)
/*
* try 10 column mode
*/
size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
debug ("SDRAM Bank 0 in 10 column mode: %ld MB\n", size10 >> 20);
#else
size10 = 0;
#endif /* CONFIG_SYS_MAMR_10COL */
if ((size8 < size10) && (size9 < size10)) {
size_b0 = size10;
} else if ((size8 < size9) && (size10 < size9)) {
size_b0 = size9;
memctl->memc_mamr = CONFIG_SYS_MAMR_9COL;
udelay (500);
} else {
size_b0 = size8;
memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
udelay (500);
}
debug ("SDRAM Bank 0: %ld MB\n", size_b0 >> 20);
#ifndef CONFIG_CAN_DRIVER
if ((board_type != 'L') &&
(board_type != 'M') &&
(board_type != 'D') ) { /* only one SDRAM bank on L, M and D modules */
/*
* Check Bank 1 Memory Size
* use current column settings
* [9 column SDRAM may also be used in 8 column mode,
* but then only half the real size will be used.]
*/
size_b1 = dram_size (memctl->memc_mamr, (long int *)SDRAM_BASE3_PRELIM,
SDRAM_MAX_SIZE);
debug ("SDRAM Bank 1: %ld MB\n", size_b1 >> 20);
} else {
size_b1 = 0;
}
#endif /* CONFIG_CAN_DRIVER */
udelay (1000);
/*
* Adjust refresh rate depending on SDRAM type, both banks
* For types > 128 MBit leave it at the current (fast) rate
*/
if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
/* reduce to 15.6 us (62.4 us / quad) */
memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
udelay (1000);
}
/*
* Final mapping: map bigger bank first
*/
if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
if (size_b0 > 0) {
/*
* Position Bank 0 immediately above Bank 1
*/
memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+ size_b1;
} else {
unsigned long reg;
/*
* No bank 0
*
* invalidate bank
*/
memctl->memc_br2 = 0;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
}
} else { /* SDRAM Bank 0 is bigger - map first */
memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
memctl->memc_br2 =
(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
if (size_b1 > 0) {
/*
* Position Bank 1 immediately above Bank 0
*/
memctl->memc_or3 =
((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
memctl->memc_br3 =
((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+ size_b0;
} else {
unsigned long reg;
#ifndef CONFIG_CAN_DRIVER
/*
* No bank 1
*
* invalidate bank
*/
memctl->memc_br3 = 0;
#endif /* CONFIG_CAN_DRIVER */
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
}
}
udelay (10000);
#ifdef CONFIG_CAN_DRIVER
/* UPM initialization for CAN @ CLKOUT <= 66 MHz */
/* Initialize OR3 / BR3 */
memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
/* Initialize MBMR */
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
/* Initialize UPMB for CAN: single read */
memctl->memc_mdr = 0xFFFFCC04;
memctl->memc_mcr = 0x0100 | UPMB;
memctl->memc_mdr = 0x0FFFD004;
memctl->memc_mcr = 0x0101 | UPMB;
memctl->memc_mdr = 0x0FFFC000;
memctl->memc_mcr = 0x0102 | UPMB;
memctl->memc_mdr = 0x3FFFC004;
memctl->memc_mcr = 0x0103 | UPMB;
memctl->memc_mdr = 0xFFFFDC07;
memctl->memc_mcr = 0x0104 | UPMB;
/* Initialize UPMB for CAN: single write */
memctl->memc_mdr = 0xFFFCCC04;
memctl->memc_mcr = 0x0118 | UPMB;
memctl->memc_mdr = 0xCFFCDC04;
memctl->memc_mcr = 0x0119 | UPMB;
memctl->memc_mdr = 0x3FFCC000;
memctl->memc_mcr = 0x011A | UPMB;
memctl->memc_mdr = 0xFFFCC004;
memctl->memc_mcr = 0x011B | UPMB;
memctl->memc_mdr = 0xFFFDC405;
memctl->memc_mcr = 0x011C | UPMB;
#endif /* CONFIG_CAN_DRIVER */
#ifdef CONFIG_ISP1362_USB
/* Initialize OR5 / BR5 */
memctl->memc_or5 = CONFIG_SYS_OR5_ISP1362;
memctl->memc_br5 = CONFIG_SYS_BR5_ISP1362;
#endif /* CONFIG_ISP1362_USB */
gd->ram_size = size_b0 + size_b1;
return 0;
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
return (get_ram_size(base, maxsize));
}
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_MISC_INIT_R
extern void load_sernum_ethaddr(void);
int misc_init_r (void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
load_sernum_ethaddr();
#ifdef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
int scy, trlx, flash_or_timing, clk_diff;
scy = (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
if (CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
trlx = OR_TRLX;
scy *= 2;
} else {
trlx = 0;
}
/*
* We assume that each 10MHz of bus clock require 1-clk SCY
* adjustment.
*/
clk_diff = (gd->bus_clk / 1000000) - 50;
/*
* We need proper rounding here. This is what the "+5" and "-5"
* are here for.
*/
if (clk_diff >= 0)
scy += (clk_diff + 5) / 10;
else
scy += (clk_diff - 5) / 10;
/*
* For bus frequencies above 50MHz, we want to use relaxed timing
* (OR_TRLX).
*/
if (gd->bus_clk >= 50000000)
trlx = OR_TRLX;
else
trlx = 0;
if (trlx)
scy /= 2;
if (scy > 0xf)
scy = 0xf;
if (scy < 1)
scy = 1;
flash_or_timing = (scy << 4) | trlx |
(CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
memctl->memc_or0 =
flash_or_timing | (-flash_info[0].size & OR_AM_MSK);
#else
memctl->memc_or0 =
CONFIG_SYS_OR_TIMING_FLASH | (-flash_info[0].size & OR_AM_MSK);
#endif
memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
debug ("## BR0: 0x%08x OR0: 0x%08x\n",
memctl->memc_br0, memctl->memc_or0);
if (flash_info[1].size) {
#ifdef CONFIG_SYS_OR_TIMING_FLASH_AT_50MHZ
memctl->memc_or1 = flash_or_timing |
(-flash_info[1].size & 0xFFFF8000);
#else
memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH |
(-flash_info[1].size & 0xFFFF8000);
#endif
memctl->memc_br1 =
((CONFIG_SYS_FLASH_BASE +
flash_info[0].
size) & BR_BA_MSK) | BR_MS_GPCM | BR_V;
debug ("## BR1: 0x%08x OR1: 0x%08x\n",
memctl->memc_br1, memctl->memc_or1);
} else {
memctl->memc_br1 = 0; /* invalidate bank */
debug ("## DISABLE BR1: 0x%08x OR1: 0x%08x\n",
memctl->memc_br1, memctl->memc_or1);
}
# ifdef CONFIG_IDE_LED
/* Configure PA15 as output port */
immap->im_ioport.iop_padir |= 0x0001;
immap->im_ioport.iop_paodr |= 0x0001;
immap->im_ioport.iop_papar &= ~0x0001;
immap->im_ioport.iop_padat &= ~0x0001; /* turn it off */
# endif
return (0);
}
#endif /* CONFIG_MISC_INIT_R */
# ifdef CONFIG_IDE_LED
void ide_led (uchar led, uchar status)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
/* We have one led for both pcmcia slots */
if (status) { /* led on */
immap->im_ioport.iop_padat |= 0x0001;
} else {
immap->im_ioport.iop_padat &= ~0x0001;
}
}
# endif
#ifdef CONFIG_LCD_INFO
#include <lcd.h>
#include <version.h>
#include <timestamp.h>
void lcd_show_board_info(void)
{
char temp[32];
lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
lcd_printf (" Wolfgang DENK, wd@denx.de\n");
#ifdef CONFIG_LCD_INFO_BELOW_LOGO
lcd_printf ("MPC823 CPU at %s MHz\n",
strmhz(temp, gd->cpu_clk));
lcd_printf (" %ld MB RAM, %ld MB Flash\n",
gd->ram_size >> 20,
gd->bd->bi_flashsize >> 20 );
#else
/* leave one blank line */
lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
strmhz(temp, gd->cpu_clk),
gd->ram_size >> 20,
gd->bd->bi_flashsize >> 20 );
#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
}
#endif /* CONFIG_LCD_INFO */
/*
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
int fdt_set_node_and_value (void *blob,
char *nodename,
char *regname,
void *var,
int size)
{
int ret = 0;
int nodeoffset = 0;
nodeoffset = fdt_path_offset (blob, nodename);
if (nodeoffset >= 0) {
ret = fdt_setprop (blob, nodeoffset, regname, var,
size);
if (ret < 0) {
printf("ft_blob_update(): "
"cannot set %s/%s property; err: %s\n",
nodename, regname, fdt_strerror (ret));
}
} else {
printf("ft_blob_update(): "
"cannot find %s node err:%s\n",
nodename, fdt_strerror (nodeoffset));
}
return ret;
}
int fdt_del_node_name (void *blob, char *nodename)
{
int ret = 0;
int nodeoffset = 0;
nodeoffset = fdt_path_offset (blob, nodename);
if (nodeoffset >= 0) {
ret = fdt_del_node (blob, nodeoffset);
if (ret < 0) {
printf("%s: cannot delete %s; err: %s\n",
__func__, nodename, fdt_strerror (ret));
}
} else {
printf("%s: cannot find %s node err:%s\n",
__func__, nodename, fdt_strerror (nodeoffset));
}
return ret;
}
int fdt_del_prop_name (void *blob, char *nodename, char *propname)
{
int ret = 0;
int nodeoffset = 0;
nodeoffset = fdt_path_offset (blob, nodename);
if (nodeoffset >= 0) {
ret = fdt_delprop (blob, nodeoffset, propname);
if (ret < 0) {
printf("%s: cannot delete %s %s; err: %s\n",
__func__, nodename, propname,
fdt_strerror (ret));
}
} else {
printf("%s: cannot find %s node err:%s\n",
__func__, nodename, fdt_strerror (nodeoffset));
}
return ret;
}
/*
* update "brg" property in the blob
*/
void ft_blob_update (void *blob, bd_t *bd)
{
uchar enetaddr[6];
ulong brg_data = 0;
/* BRG */
brg_data = cpu_to_be32(bd->bi_busfreq);
fdt_set_node_and_value(blob,
"/soc/cpm", "brg-frequency",
&brg_data, sizeof(brg_data));
/* MAC addr */
if (eth_getenv_enetaddr("ethaddr", enetaddr)) {
fdt_set_node_and_value(blob,
"ethernet0", "local-mac-address",
enetaddr, sizeof(u8) * 6);
}
if (hwconfig_arg_cmp("fec", "off")) {
/* no FEC on this plattform, delete DTS nodes */
fdt_del_node_name (blob, "ethernet1");
fdt_del_node_name (blob, "mdio1");
/* also the aliases entries */
fdt_del_prop_name (blob, "/aliases", "ethernet1");
fdt_del_prop_name (blob, "/aliases", "mdio1");
} else {
/* adjust local-mac-address for FEC ethernet */
if (eth_getenv_enetaddr("eth1addr", enetaddr)) {
fdt_set_node_and_value(blob,
"ethernet1", "local-mac-address",
enetaddr, sizeof(u8) * 6);
}
}
}
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_blob_update(blob, bd);
return 0;
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */

94
board/tqc/tqm8xx/u-boot.lds
View File

@ -1,94 +0,0 @@
/*
* (C) Copyright 2000-2012
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
OUTPUT_ARCH(powerpc)
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
arch/powerpc/cpu/mpc8xx/start.o (.text*)
arch/powerpc/cpu/mpc8xx/traps.o (.text*)
arch/powerpc/cpu/mpc8xx/built-in.o (.text*)
arch/powerpc/lib/built-in.o (.text*)
board/tqc/tqm8xx/built-in.o (.text*)
disk/built-in.o (.text*)
drivers/net/built-in.o (.text*)
drivers/built-in.o (.text.pcmcia_on)
drivers/built-in.o (.text.pcmcia_hardware_enable)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.ppcenv*)
*(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
_GOT2_TABLE_ = .;
KEEP(*(.got2))
KEEP(*(.got))
_FIXUP_TABLE_ = .;
KEEP(*(.fixup))
}
__got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data*)
*(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
. = .;
. = ALIGN(4);
.u_boot_list : {
KEEP(*(SORT(.u_boot_list*)));
}
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
__bss_start = .;
.bss (NOLOAD) :
{
*(.bss*)
*(.sbss*)
*(COMMON)
. = ALIGN(4);
}
__bss_end = . ;
PROVIDE (end = .);
}

2
cmd/bdinfo.c
View File

@ -183,7 +183,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_bi_flash(bd);
print_num("sramstart", bd->bi_sramstart);
print_num("sramsize", bd->bi_sramsize);
#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || \
#if defined(CONFIG_5xx) || \
defined(CONFIG_MPC8260) || defined(CONFIG_E500)
print_num("immr_base", bd->bi_immr_base);
#endif

4
cmd/bedbug.c
View File

@ -52,10 +52,6 @@ void bedbug_init (void)
void bedbug405_init (void);
bedbug405_init ();
#elif defined(CONFIG_8xx)
void bedbug860_init (void);
bedbug860_init ();
#endif
#if defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260)

9
cmd/ide.c
View File

@ -18,7 +18,7 @@
#include <asm/byteorder.h>
#include <asm/io.h>
#if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA)
#if defined(CONFIG_IDE_PCMCIA)
# include <pcmcia.h>
#endif
@ -42,12 +42,7 @@ int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
return CMD_RET_USAGE;
case 2:
if (strncmp(argv[1], "res", 3) == 0) {
puts("\nReset IDE"
#ifdef CONFIG_IDE_8xx_DIRECT
" on PCMCIA " PCMCIA_SLOT_MSG
#endif
": ");
puts("\nReset IDE: ");
ide_init();
return 0;
} else if (strncmp(argv[1], "inf", 3) == 0) {

4
cmd/pcmcia.c
View File

@ -83,10 +83,6 @@ U_BOOT_CMD(
#undef CHECK_IDE_DEVICE
#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#define CHECK_IDE_DEVICE
#endif
#if defined(CONFIG_PXA_PCMCIA)
#define CHECK_IDE_DEVICE
#endif

59
cmd/reginfo.c
View File

@ -7,9 +7,7 @@
#include <common.h>
#include <command.h>
#if defined(CONFIG_8xx)
#include <mpc8xx.h>
#elif defined (CONFIG_4xx)
#if defined (CONFIG_4xx)
extern void ppc4xx_reginfo(void);
#elif defined (CONFIG_5xx)
#include <mpc5xx.h>
@ -24,60 +22,7 @@ extern void mpc85xx_reginfo(void);
static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
#if defined(CONFIG_8xx)
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
volatile sysconf8xx_t *sysconf = &immap->im_siu_conf;
volatile sit8xx_t *timers = &immap->im_sit;
/* Hopefully more PowerPC knowledgable people will add code to display
* other useful registers
*/
printf ("\nSystem Configuration registers\n"
"\tIMMR\t0x%08X\n", get_immr(0));
printf("\tSIUMCR\t0x%08X", sysconf->sc_siumcr);
printf("\tSYPCR\t0x%08X\n",sysconf->sc_sypcr);
printf("\tSWT\t0x%08X", sysconf->sc_swt);
printf("\tSWSR\t0x%04X\n", sysconf->sc_swsr);
printf("\tSIPEND\t0x%08X\tSIMASK\t0x%08X\n",
sysconf->sc_sipend, sysconf->sc_simask);
printf("\tSIEL\t0x%08X\tSIVEC\t0x%08X\n",
sysconf->sc_siel, sysconf->sc_sivec);
printf("\tTESR\t0x%08X\tSDCR\t0x%08X\n",
sysconf->sc_tesr, sysconf->sc_sdcr);
printf ("Memory Controller Registers\n"
"\tBR0\t0x%08X\tOR0\t0x%08X \n", memctl->memc_br0, memctl->memc_or0);
printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", memctl->memc_br1, memctl->memc_or1);
printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", memctl->memc_br2, memctl->memc_or2);
printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", memctl->memc_br3, memctl->memc_or3);
printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", memctl->memc_br4, memctl->memc_or4);
printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", memctl->memc_br5, memctl->memc_or5);
printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", memctl->memc_br6, memctl->memc_or6);
printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", memctl->memc_br7, memctl->memc_or7);
printf ("\n"
"\tmamr\t0x%08X\tmbmr\t0x%08X \n",
memctl->memc_mamr, memctl->memc_mbmr );
printf("\tmstat\t0x%08X\tmptpr\t0x%08X \n",
memctl->memc_mstat, memctl->memc_mptpr );
printf("\tmdr\t0x%08X \n", memctl->memc_mdr);
printf ("\nSystem Integration Timers\n"
"\tTBSCR\t0x%08X\tRTCSC\t0x%08X \n",
timers->sit_tbscr, timers->sit_rtcsc);
printf("\tPISCR\t0x%08X \n", timers->sit_piscr);
/*
* May be some CPM info here?
*/
#elif defined (CONFIG_4xx)
#if defined (CONFIG_4xx)
ppc4xx_reginfo();
#elif defined(CONFIG_5xx)

3
cmd/source.c
View File

@ -22,9 +22,6 @@
#include <mapmem.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#if defined(CONFIG_8xx)
#include <mpc8xx.h>
#endif
int
source (ulong addr, const char *fit_uname)

4
common/board_f.c
View File

@ -387,7 +387,7 @@ static int reserve_video(void)
gd->fb_base = gd->relocaddr;
# endif /* CONFIG_FB_ADDR */
#elif defined(CONFIG_VIDEO) && \
(!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \
(!defined(CONFIG_PPC)) && \
!defined(CONFIG_ARM) && !defined(CONFIG_X86) && \
!defined(CONFIG_M68K)
/* reserve memory for video display (always full pages) */
@ -547,7 +547,7 @@ static int setup_board_part1(void)
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */
#endif
#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \
#if defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \
defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
#endif

14
common/board_r.c
View File

@ -227,13 +227,6 @@ static int initr_post_backlog(void)
}
#endif
#ifdef CONFIG_SYS_DELAYED_ICACHE
static int initr_icache_enable(void)
{
return 0;
}
#endif
#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
static int initr_unlock_ram_in_cache(void)
{
@ -639,11 +632,7 @@ static int initr_pcmcia(void)
#if defined(CONFIG_IDE)
static int initr_ide(void)
{
#ifdef CONFIG_IDE_8xx_PCCARD
puts("PCMCIA:");
#else
puts("IDE: ");
#endif
#if defined(CONFIG_START_IDE)
if (board_start_ide())
ide_init();
@ -786,9 +775,6 @@ static init_fnc_t init_sequence_r[] = {
initr_post_backlog,
#endif
INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_SYS_DELAYED_ICACHE
initr_icache_enable,
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
/*
* Do early PCI configuration _before_ the flash gets initialised,

14
common/bootm_os.c
View File

@ -56,7 +56,6 @@ static int do_bootm_netbsd(int flag, int argc, char * const argv[],
void (*loader)(bd_t *, image_header_t *, char *, char *);
image_header_t *os_hdr, *hdr;
ulong kernel_data, kernel_len;
char *consdev;
char *cmdline;
if (flag != BOOTM_STATE_OS_GO)
@ -88,17 +87,6 @@ static int do_bootm_netbsd(int flag, int argc, char * const argv[],
os_hdr = hdr;
}
consdev = "";
#if defined(CONFIG_8xx_CONS_SMC1)
consdev = "smc1";
#elif defined(CONFIG_8xx_CONS_SMC2)
consdev = "smc2";
#elif defined(CONFIG_8xx_CONS_SCC2)
consdev = "scc2";
#elif defined(CONFIG_8xx_CONS_SCC3)
consdev = "scc3";
#endif
if (argc > 0) {
ulong len;
int i;
@ -127,7 +115,7 @@ static int do_bootm_netbsd(int flag, int argc, char * const argv[],
* arg[2]: char pointer to the console device to use
* arg[3]: char pointer to the boot arguments
*/
(*loader)(gd->bd, os_hdr, consdev, cmdline);
(*loader)(gd->bd, os_hdr, "", cmdline);
return 1;
}

4
common/lcd.c
View File

@ -562,11 +562,7 @@ __weak void lcd_set_cmap(struct bmp_image *bmp, unsigned colors)
*cmap = (((cte.red) << 8) & 0xf800) |
(((cte.green) << 3) & 0x07e0) |
(((cte.blue) >> 3) & 0x001f);
#if defined(CONFIG_MPC823)
cmap--;
#else
cmap++;
#endif
}
}

24
configs/TQM823L_LCD_defconfig
View File

@ -1,24 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM823L=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="NEC_NL6448BC20"
CONFIG_BOOTDELAY=5
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_BMP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y

27
configs/TQM823L_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM823L=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM823M_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM823M=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM850L_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM850L=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM850M_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM850M=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM855L_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM855L=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

28
configs/TQM855M_defconfig
View File

@ -1,28 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM855M=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM860L_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM860L=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM860M_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM860M=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM862L_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM862L=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM862M_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM862M=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

27
configs/TQM866M_defconfig
View File

@ -1,27 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM866M=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

30
configs/TQM885D_defconfig
View File

@ -1,30 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM885D=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
CONFIG_LOOPW=y
CONFIG_CMD_IDE=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
CONFIG_LED_STATUS=y
# CONFIG_LED_STATUS_BOARD_SPECIFIC is not set
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=1
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_OF_LIBFDT=y

24
configs/TTTech_defconfig
View File

@ -1,24 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM823L=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SHARP_LQ104V7DS01"
CONFIG_BOOTDELAY=5
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_BMP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y

24
configs/wtk_defconfig
View File

@ -1,24 +0,0 @@
CONFIG_PPC=y
CONFIG_8xx=y
CONFIG_TARGET_TQM823L=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SHARP_LQ065T9DR51U"
CONFIG_BOOTDELAY=5
# CONFIG_CONSOLE_MUX is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_IDE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_BMP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_JFFS2=y
CONFIG_MAC_PARTITION=y
CONFIG_DOS_PARTITION=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
# CONFIG_PCI is not set
CONFIG_LCD=y
CONFIG_OF_LIBFDT=y

1
doc/README.LED
View File

@ -73,6 +73,5 @@ These are weakly defined in arch/arm/lib/board.c to noops. Where applicable, def
these functions in the board specific source.
TBD : Describe older board dependent macros similar to what is done for
CONFIG_TQM8xxL.
TBD : Describe general support via asm/status_led.h

24
doc/README.MPC866
View File

@ -1,24 +0,0 @@
The current implementation allows the user to specify the desired CPU
clock value, in MHz, via an environment variable "cpuclk".
Four compile-time constants are used:
CONFIG_8xx_OSCLK - input quartz clock
CONFIG_SYS_8xx_CPUCLK_MIN - minimum allowed CPU clock
CONFIG_SYS_8xx_CPUCLK_MAX - maximum allowed CPU clock
CONFIG_8xx_CPUCLK_DEFAULT - default CPU clock value
If the "cpuclk" environment variable value is within the CPUCLK_MIN /
CPUCLK_MAX limits, the specified value is used. Otherwise, the
default CPU clock value is set.
Please make sure you understand what you are doing, and understand
the restrictions of your hardware (board, processor). For example,
ethernet will stop working for CPU clock frequencies below 25 MHz.
Please note that the new clock-handling code is enabled if
CONFIG_8xx_CPUCLK_DEFAULT is defined. Since this mechanism supports
only MPC866 and newer CPUs, this constant MUST NOT be defined for
MPC823/850/860/862 series. The clock generation algorithm for older
chips is different and has not been implemented yet. If you need it,
your patch is welcome.

6
doc/README.fsl-clk
View File

@ -1,6 +0,0 @@
Freescale system clock options
- CONFIG_SYS_FSL_CLK
Enable to call get_clocks() in board_init_f() for
non-PPC platforms and PCC 8xx platforms such as
TQM866M and TQM885D.

1
doc/README.scrapyard
View File

@ -316,7 +316,6 @@ ADCIOP powerpc ppc4xx 99bcad1 2012-09-19 Matthias Fuc
DASA_SIM powerpc ppc4xx 99bcad1 2012-09-19 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
tb0229 mips mips32 3f3110d 2011-12-12
rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
OXC powerpc MPC8240 309a292 2011-12-07
BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
xm250 arm pxa c477d72 2011-11-25

11
drivers/block/ide.c
View File

@ -770,10 +770,6 @@ void ide_init(void)
unsigned char c;
int i, bus;
#ifdef CONFIG_IDE_8xx_PCCARD
extern int ide_devices_found; /* Initialized in check_ide_device() */
#endif /* CONFIG_IDE_8xx_PCCARD */
#ifdef CONFIG_IDE_PREINIT
WATCHDOG_RESET();
@ -812,13 +808,6 @@ void ide_init(void)
bus * (CONFIG_SYS_IDE_MAXDEVICE /
CONFIG_SYS_IDE_MAXBUS);
#ifdef CONFIG_IDE_8xx_PCCARD
/* Skip non-ide devices from probing */
if ((ide_devices_found & (1 << bus)) == 0) {
ide_led((LED_IDE1 | LED_IDE2), 0); /* LED's off */
continue;
}
#endif
printf("Bus %d: ", bus);
ide_bus_ok[bus] = 0;

1
drivers/block/sil680.c
View File

@ -18,7 +18,6 @@
* #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0
*
* #define CONFIG_IDE
* #undef CONFIG_IDE_8xx_DIRECT
* #undef CONFIG_IDE_LED
* #undef CONFIG_IDE_RESET
* #define CONFIG_IDE_PREINIT

5
drivers/bootcount/bootcount.c
View File

@ -24,11 +24,6 @@
#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
#endif /* defined(CONFIG_MPC512X) */
#if defined(CONFIG_8xx)
#define CONFIG_SYS_BOOTCOUNT_ADDR (((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + \
CPM_BOOTCOUNT_ADDR)
#endif /* defined(CONFIG_8xx) */
#if defined(CONFIG_MPC8260)
#include <asm/cpm_8260.h>
#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR)

11
drivers/i2c/i2c_core.c
View File

@ -323,11 +323,6 @@ uint8_t i2c_reg_read(uint8_t addr, uint8_t reg)
{
uint8_t buf;
#ifdef CONFIG_8xx
/* MPC8xx needs this. Maybe one day we can get rid of it. */
/* maybe it is now the time for it ... */
i2c_set_bus_num(i2c_get_bus_num());
#endif
i2c_read(addr, reg, 1, &buf, 1);
#ifdef DEBUG
@ -340,12 +335,6 @@ uint8_t i2c_reg_read(uint8_t addr, uint8_t reg)
void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val)
{
#ifdef CONFIG_8xx
/* MPC8xx needs this. Maybe one day we can get rid of it. */
/* maybe it is now the time for it ... */
i2c_set_bus_num(i2c_get_bus_num());
#endif
#ifdef DEBUG
printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
__func__, i2c_get_bus_num(), addr, reg, val);

3
drivers/i2c/soft_i2c.c
View File

@ -97,9 +97,6 @@ DECLARE_GLOBAL_DATA_PTR;
# if defined(CONFIG_MPC8260)
# define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = \
ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
# elif defined(CONFIG_8xx)
# define I2C_SOFT_DECLARATIONS volatile immap_t *immr = \
(immap_t *)CONFIG_SYS_IMMR;
# else
# define I2C_SOFT_DECLARATIONS
# endif

1
drivers/net/4xx_enet.c
View File

@ -67,7 +67,6 @@
#include <asm/io.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <commproc.h>
#include <asm/ppc4xx.h>
#include <asm/ppc4xx-emac.h>
#include <asm/ppc4xx-mal.h>

2
drivers/pcmcia/Makefile
View File

@ -5,7 +5,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_8xx) += mpc8xx_pcmcia.o
obj-$(CONFIG_IDE_TI_CARDBUS) += ti_pci1410a.o
obj-y += tqm8xx_pcmcia.o
obj-$(CONFIG_MARUBUN_PCCARD) += marubun_pcmcia.o

258
drivers/pcmcia/mpc8xx_pcmcia.c
View File

@ -1,258 +0,0 @@
#include <common.h>
#include <mpc8xx.h>
#include <pcmcia.h>
#include <linux/compiler.h>
#undef CONFIG_PCMCIA
#if defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
#if defined(CONFIG_PCMCIA)
#if defined(CONFIG_IDE_8xx_PCCARD)
extern int check_ide_device (int slot);
#endif
extern int pcmcia_hardware_enable (int slot);
extern int pcmcia_voltage_set(int slot, int vcc, int vpp);
#if defined(CONFIG_CMD_PCMCIA)
extern int pcmcia_hardware_disable(int slot);
#endif
static u_int m8xx_get_graycode(u_int size);
#if 0 /* Disabled */
static u_int m8xx_get_speed(u_int ns, u_int is_io);
#endif
/* look up table for pgcrx registers */
u_int *pcmcia_pgcrx[2] = {
&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcra,
&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb,
};
/*
* Search this table to see if the windowsize is
* supported...
*/
#define M8XX_SIZES_NO 32
static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
{ 0x00000001, 0x00000002, 0x00000008, 0x00000004,
0x00000080, 0x00000040, 0x00000010, 0x00000020,
0x00008000, 0x00004000, 0x00001000, 0x00002000,
0x00000100, 0x00000200, 0x00000800, 0x00000400,
0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
0x01000000, 0x02000000, 0xffffffff, 0x04000000,
0x00010000, 0x00020000, 0x00080000, 0x00040000,
0x00800000, 0x00400000, 0x00100000, 0x00200000 };
/* -------------------------------------------------------------------- */
#define CONFIG_SYS_PCMCIA_TIMING ( PCMCIA_SHT(2) \
| PCMCIA_SST(4) \
| PCMCIA_SL(9))
/* -------------------------------------------------------------------- */
int pcmcia_on (void)
{
u_long reg, base;
pcmcia_win_t *win;
u_int rc, slot;
__maybe_unused u_int slotbit;
int i;
debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
/* intialize the fixed memory windows */
win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
base = CONFIG_SYS_PCMCIA_MEM_ADDR;
if((reg = m8xx_get_graycode(CONFIG_SYS_PCMCIA_MEM_SIZE)) == -1) {
printf ("Cannot set window size to 0x%08x\n",
CONFIG_SYS_PCMCIA_MEM_SIZE);
return (1);
}
slotbit = PCMCIA_SLOT_x;
for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
win->br = base;
#if (PCMCIA_SOCKETS_NO == 2)
if (i == 4) /* Another slot starting from win 4 */
slotbit = (slotbit ? PCMCIA_PSLOT_A : PCMCIA_PSLOT_B);
#endif
switch (i) {
#ifdef CONFIG_IDE_8xx_PCCARD
case 4:
case 0: { /* map attribute memory */
win->or = ( PCMCIA_BSIZE_64M
| PCMCIA_PPS_8
| PCMCIA_PRS_ATTR
| slotbit
| PCMCIA_PV
| CONFIG_SYS_PCMCIA_TIMING );
break;
}
case 5:
case 1: { /* map I/O window for data reg */
win->or = ( PCMCIA_BSIZE_1K
| PCMCIA_PPS_16
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
| CONFIG_SYS_PCMCIA_TIMING );
break;
}
case 6:
case 2: { /* map I/O window for cmd/ctrl reg block */
win->or = ( PCMCIA_BSIZE_1K
| PCMCIA_PPS_8
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
| CONFIG_SYS_PCMCIA_TIMING );
break;
}
#endif /* CONFIG_IDE_8xx_PCCARD */
default: /* set to not valid */
win->or = 0;
break;
}
debug ("MemWin %d: PBR 0x%08lX POR %08lX\n",
i, win->br, win->or);
base += CONFIG_SYS_PCMCIA_MEM_SIZE;
++win;
}
for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) {
/* turn off voltage */
if ((rc = pcmcia_voltage_set(slot, 0, 0)))
continue;
/* Enable external hardware */
if ((rc = pcmcia_hardware_enable(slot)))
continue;
#ifdef CONFIG_IDE_8xx_PCCARD
if ((rc = check_ide_device(i)))
continue;
#endif
}
return rc;
}
#if defined(CONFIG_CMD_PCMCIA)
int pcmcia_off (void)
{
int i;
pcmcia_win_t *win;
printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
/* clear interrupt state, and disable interrupts */
((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pscr = PCMCIA_MASK(_slot_);
((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
/* turn off interrupt and disable CxOE */
PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
/* turn off memory windows */
win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
/* disable memory window */
win->or = 0;
++win;
}
/* turn off voltage */
pcmcia_voltage_set(_slot_, 0, 0);
/* disable external hardware */
printf ("Shutdown and Poweroff " PCMCIA_SLOT_MSG "\n");
pcmcia_hardware_disable(_slot_);
return 0;
}
#endif
static u_int m8xx_get_graycode(u_int size)
{
u_int k;
for (k = 0; k < M8XX_SIZES_NO; k++) {
if(m8xx_size_to_gray[k] == size)
break;
}
if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
k = -1;
return k;
}
#if 0
static u_int m8xx_get_speed(u_int ns, u_int is_io)
{
u_int reg, clocks, psst, psl, psht;
if(!ns) {
/*
* We get called with IO maps setup to 0ns
* if not specified by the user.
* They should be 255ns.
*/
if(is_io)
ns = 255;
else
ns = 100; /* fast memory if 0 */
}
/*
* In PSST, PSL, PSHT fields we tell the controller
* timing parameters in CLKOUT clock cycles.
* CLKOUT is the same as GCLK2_50.
*/
/* how we want to adjust the timing - in percent */
#define ADJ 180 /* 80 % longer accesstime - to be sure */
clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
clocks = (clocks * ADJ) / (100*1000);
if(clocks >= PCMCIA_BMT_LIMIT) {
DEBUG(0, "Max access time limit reached\n");
clocks = PCMCIA_BMT_LIMIT-1;
}
psst = clocks / 7; /* setup time */
psht = clocks / 7; /* hold time */
psl = (clocks * 5) / 7; /* strobe length */
psst += clocks - (psst + psht + psl);
reg = psst << 12;
reg |= psl << 7;
reg |= psht << 16;
return reg;
}
#endif /* 0 */
#endif /* CONFIG_PCMCIA */

254
drivers/pcmcia/tqm8xx_pcmcia.c
View File

@ -1,254 +0,0 @@
/* -------------------------------------------------------------------- */
/* TQM8xxL Boards by TQ Components */
/* SC8xx Boards by SinoVee Microsystems */
/* -------------------------------------------------------------------- */
#include <common.h>
#include <asm/io.h>
#ifdef CONFIG_8xx
#include <mpc8xx.h>
#endif
#include <pcmcia.h>
#undef CONFIG_PCMCIA
#if defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
#if defined(CONFIG_PCMCIA) \
&& defined(CONFIG_TQM8xxL)
#if defined(CONFIG_TQM8xxL)
#define PCMCIA_BOARD_MSG "TQM8xxL"
#endif
static inline void power_config(int slot)
{
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable
*/
clrbits_be16(&immap->im_ioport.iop_pcpar, 0x0002 | 0x0004);
clrbits_be16(&immap->im_ioport.iop_pcso, 0x0002 | 0x0004);
}
static inline void power_off(int slot)
{
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
clrbits_be16(&immap->im_ioport.iop_pcdat, 0x0002 | 0x0004);
}
static inline void power_on_5_0(int slot)
{
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
setbits_be16(&immap->im_ioport.iop_pcdat, 0x0004);
setbits_be16(&immap->im_ioport.iop_pcdir, 0x0002 | 0x0004);
}
static inline void power_on_3_3(int slot)
{
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
setbits_be16(&immap->im_ioport.iop_pcdat, 0x0002);
setbits_be16(&immap->im_ioport.iop_pcdir, 0x0002 | 0x0004);
}
/*
* Function to retrieve the PIPR register, used for debuging purposes.
*/
static inline uint32_t debug_get_pipr(void)
{
uint32_t pipr = 0;
#ifdef DEBUG
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
pipr = in_be32(&immap->im_pcmcia.pcmc_pipr);
#endif
return pipr;
}
static inline int check_card_is_absent(int slot)
{
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
uint32_t pipr = in_be32(&immap->im_pcmcia.pcmc_pipr);
return pipr & (0x18000000 >> (slot << 4));
}
#define NSCU_GCRX_CXOE __MY_PCMCIA_GCRX_CXOE
int pcmcia_hardware_enable(int slot)
{
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
uint reg, mask;
debug("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
udelay(10000);
/*
* Configure SIUMCR to enable PCMCIA port B
* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
*/
/* Set DBGC to 00 */
clrbits_be32(&immap->im_siu_conf.sc_siumcr, SIUMCR_DBGC11);
/* Clear interrupt state, and disable interrupts */
out_be32(&immap->im_pcmcia.pcmc_pscr, PCMCIA_MASK(slot));
clrbits_be32(&immap->im_pcmcia.pcmc_per, PCMCIA_MASK(slot));
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= NSCU_GCRX_CXOE;
PCMCIA_PGCRX(slot) = reg;
udelay(500);
power_config(slot);
power_off(slot);
/*
* Make sure there is a card in the slot, then configure the interface.
*/
udelay(10000);
reg = debug_get_pipr();
debug("[%d] %s: PIPR(%p)=0x%x\n", __LINE__, __FUNCTION__,
&immap->im_pcmcia.pcmc_pipr, reg);
if (check_card_is_absent(slot)) {
printf (" No Card found\n");
return (1);
}
/*
* Power On.
*/
mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
reg = in_be32(&immap->im_pcmcia.pcmc_pipr);
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
reg,
(reg & PCMCIA_VS1(slot)) ? "n" : "ff",
(reg & PCMCIA_VS2(slot)) ? "n" : "ff");
if ((reg & mask) == mask) {
power_on_5_0(slot);
puts (" 5.0V card found: ");
} else {
power_on_3_3(slot);
puts (" 3.3V card found: ");
}
#if 0
/* VCC switch error flag, PCMCIA slot INPACK_ pin */
cp->cp_pbdir &= ~(0x0020 | 0x0010);
cp->cp_pbpar &= ~(0x0020 | 0x0010);
udelay(500000);
#endif
udelay(1000);
debug("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(slot);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
reg &= ~NSCU_GCRX_CXOE;
PCMCIA_PGCRX(slot) = reg;
udelay(250000); /* some cards need >150 ms to come up :-( */
debug("# hardware_enable done\n");
return (0);
}
#if defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable(int slot)
{
u_long reg;
debug("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
/* remove all power */
power_off(slot);
debug("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= NSCU_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(10000);
return (0);
}
#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp)
{
u_long reg;
uint32_t pipr = 0;
debug("voltage_set: " PCMCIA_BOARD_MSG
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
*/
debug("Disable PCMCIA buffers and assert RESET\n");
reg = PCMCIA_PGCRX(slot);
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
reg |= NSCU_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(500);
debug("PCMCIA power OFF\n");
power_config(slot);
power_off(slot);
switch(vcc) {
case 0: break;
case 33: power_on_3_3(slot); break;
case 50: power_on_5_0(slot); break;
default: goto done;
}
/* Checking supported voltages */
pipr = debug_get_pipr();
debug("PIPR: 0x%x --> %s\n", pipr,
(pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
if (vcc)
debug("PCMCIA powered at %sV\n", (vcc == 50) ? "5.0" : "3.3");
else
debug("PCMCIA powered down\n");
done:
debug("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(slot);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
reg &= ~NSCU_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(500);
debug("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", slot+'A');
return 0;
}
#endif /* CONFIG_PCMCIA && CONFIG_TQM8xxL */

1
drivers/rtc/Makefile
View File

@ -39,7 +39,6 @@ obj-$(CONFIG_RTC_MCP79411) += ds1307.o
obj-$(CONFIG_MCFRTC) += mcfrtc.o
obj-$(CONFIG_RTC_MK48T59) += mk48t59.o
obj-$(CONFIG_RTC_MPC5200) += mpc5xxx.o
obj-$(CONFIG_RTC_MPC8xx) += mpc8xx.o
obj-$(CONFIG_RTC_MV) += mvrtc.o
obj-$(CONFIG_RTC_MX27) += mx27rtc.o
obj-$(CONFIG_RTC_MXS) += mxsrtc.o

60
drivers/rtc/mpc8xx.c
View File

@ -1,60 +0,0 @@
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Date & Time support for internal RTC of MPC8xx
*/
/*#define DEBUG*/
#include <common.h>
#include <command.h>
#include <rtc.h>
#if defined(CONFIG_CMD_DATE)
/* ------------------------------------------------------------------------- */
int rtc_get (struct rtc_time *tmp)
{
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
ulong tim;
tim = immr->im_sit.sit_rtc;
rtc_to_tm(tim, tmp);
debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return 0;
}
int rtc_set (struct rtc_time *tmp)
{
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
ulong tim;
debug ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
tim = rtc_mktime(tmp);
immr->im_sitk.sitk_rtck = KAPWR_KEY;
immr->im_sit.sit_rtc = tim;
return 0;
}
void rtc_reset (void)
{
return; /* nothing to do */
}
#endif

1
drivers/usb/gadget/Makefile
View File

@ -41,7 +41,6 @@ ifdef CONFIG_USB_DEVICE
obj-y += core.o
obj-y += ep0.o
obj-$(CONFIG_DW_UDC) += designware_udc.o
obj-$(CONFIG_MPC885_FAMILY) += mpc8xx_udc.o
obj-$(CONFIG_CPU_PXA27X) += pxa27x_udc.o
endif
endif

1386
drivers/usb/gadget/mpc8xx_udc.c
View File

File diff suppressed because it is too large Load Diff

1
drivers/video/Makefile
View File

@ -29,7 +29,6 @@ obj-$(CONFIG_CFB_CONSOLE) += cfb_console.o
obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
obj-$(CONFIG_VIDEO_FSL_DCU_FB) += fsl_dcu_fb.o videomodes.o
obj-$(CONFIG_L5F31188) += l5f31188.o
obj-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o
obj-$(CONFIG_PXA_LCD) += pxa_lcd.o
obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
obj-$(CONFIG_S6E8AX0) += s6e8ax0.o

400
drivers/video/mpc8xx_lcd.c
View File

@ -1,400 +0,0 @@
/*
* (C) Copyright 2001-2002
* Wolfgang Denk, DENX Software Engineering -- wd@denx.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
/************************************************************************/
/* ** HEADER FILES */
/************************************************************************/
/* #define DEBUG */
#include <config.h>
#include <common.h>
#include <command.h>
#include <watchdog.h>
#include <stdarg.h>
#include <lcdvideo.h>
#include <linux/types.h>
#include <stdio_dev.h>
#if defined(CONFIG_POST)
#include <post.h>
#endif
#include <lcd.h>
#ifdef CONFIG_LCD
/************************************************************************/
/* ** CONFIG STUFF -- should be moved to board config file */
/************************************************************************/
#ifndef CONFIG_LCD_INFO
#define CONFIG_LCD_INFO /* Display Logo, (C) and system info */
#endif
/*----------------------------------------------------------------------*/
#ifdef CONFIG_KYOCERA_KCS057QV1AJ
/*
* Kyocera KCS057QV1AJ-G23. Passive, color, single scan.
*/
#define LCD_BPP LCD_COLOR4
vidinfo_t panel_info = {
640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
LCD_BPP, 1, 0, 1, 0, 5, 0, 0, 0
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_KYOCERA_KCS057QV1AJ */
/*----------------------------------------------------------------------*/
/*----------------------------------------------------------------------*/
#ifdef CONFIG_HITACHI_SP19X001_Z1A
/*
* Hitachi SP19X001-. Active, color, single scan.
*/
vidinfo_t panel_info = {
640, 480, 154, 116, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
LCD_COLOR8, 1, 0, 1, 0, 0, 0, 0, 0
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_HITACHI_SP19X001_Z1A */
/*----------------------------------------------------------------------*/
/*----------------------------------------------------------------------*/
#ifdef CONFIG_NEC_NL6448AC33
/*
* NEC NL6448AC33-18. Active, color, single scan.
*/
vidinfo_t panel_info = {
640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 144, 2, 0, 33
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_NEC_NL6448AC33 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_NEC_NL6448BC20
/*
* NEC NL6448BC20-08. 6.5", 640x480. Active, color, single scan.
*/
vidinfo_t panel_info = {
640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 144, 2, 0, 33
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_NEC_NL6448BC20 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_NEC_NL6448BC33_54
/*
* NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan.
*/
vidinfo_t panel_info = {
640, 480, 212, 158, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 144, 2, 0, 33
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_NEC_NL6448BC33_54 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_SHARP_LQ104V7DS01
/*
* SHARP LQ104V7DS01. 6.5", 640x480. Active, color, single scan.
*/
vidinfo_t panel_info = {
640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
3, 0, 0, 1, 1, 25, 1, 0, 33
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_SHARP_LQ104V7DS01 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_SHARP_16x9
/*
* Sharp 320x240. Active, color, single scan. It isn't 16x9, and I am
* not sure what it is.......
*/
vidinfo_t panel_info = {
320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 15, 4, 0, 3
};
#endif /* CONFIG_SHARP_16x9 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_SHARP_LQ057Q3DC02
/*
* Sharp LQ057Q3DC02 display. Active, color, single scan.
*/
#undef LCD_DF
#define LCD_DF 12
vidinfo_t panel_info = {
320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 15, 4, 0, 3
/* wbl, vpw, lcdac, wbf */
};
#define CONFIG_LCD_INFO_BELOW_LOGO
#endif /* CONFIG_SHARP_LQ057Q3DC02 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_SHARP_LQ64D341
/*
* Sharp LQ64D341 display, 640x480. Active, color, single scan.
*/
vidinfo_t panel_info = {
640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 128, 16, 0, 32
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_SHARP_LQ64D341 */
#ifdef CONFIG_SHARP_LQ065T9DR51U
/*
* Sharp LQ065T9DR51U display, 400x240. Active, color, single scan.
*/
vidinfo_t panel_info = {
400, 240, 143, 79, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 248, 4, 0, 35
/* wbl, vpw, lcdac, wbf */
};
#define CONFIG_LCD_INFO_BELOW_LOGO
#endif /* CONFIG_SHARP_LQ065T9DR51U */
#ifdef CONFIG_SHARP_LQ084V1DG21
/*
* Sharp LQ084V1DG21 display, 640x480. Active, color, single scan.
*/
vidinfo_t panel_info = {
640, 480, 171, 129, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
3, 0, 0, 1, 1, 160, 3, 0, 48
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_SHARP_LQ084V1DG21 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_HLD1045
/*
* HLD1045 display, 640x480. Active, color, single scan.
*/
vidinfo_t panel_info = {
640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 160, 3, 0, 48
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_HLD1045 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_PRIMEVIEW_V16C6448AC
/*
* Prime View V16C6448AC
*/
vidinfo_t panel_info = {
640, 480, 130, 98, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
3, 0, 0, 1, 1, 144, 2, 0, 35
/* wbl, vpw, lcdac, wbf */
};
#endif /* CONFIG_PRIMEVIEW_V16C6448AC */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_OPTREX_BW
/*
* Optrex CBL50840-2 NF-FW 99 22 M5
* or
* Hitachi LMG6912RPFC-00T
* or
* Hitachi SP14Q002
*
* 320x240. Black & white.
*/
#define OPTREX_BPP 0 /* 0 - monochrome, 1 bpp */
/* 1 - 4 grey levels, 2 bpp */
/* 2 - 16 grey levels, 4 bpp */
vidinfo_t panel_info = {
320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
OPTREX_BPP, 0, 0, 0, 0, 0, 0, 0, 0, 4
};
#endif /* CONFIG_OPTREX_BW */
/************************************************************************/
/* ----------------- chipset specific functions ----------------------- */
/************************************************************************/
/*
* Calculate fb size for VIDEOLFB_ATAG.
*/
ulong calc_fbsize (void)
{
ulong size;
int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
size = line_length * panel_info.vl_row;
return size;
}
void lcd_ctrl_init (void *lcdbase)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile lcd823_t *lcdp = &immr->im_lcd;
uint lccrtmp;
uint lchcr_hpc_tmp;
/* Initialize the LCD control register according to the LCD
* parameters defined. We do everything here but enable
* the controller.
*/
lccrtmp = LCDBIT (LCCR_BNUM_BIT,
(((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128));
lccrtmp |= LCDBIT (LCCR_CLKP_BIT, panel_info.vl_clkp) |
LCDBIT (LCCR_OEP_BIT, panel_info.vl_oep) |
LCDBIT (LCCR_HSP_BIT, panel_info.vl_hsp) |
LCDBIT (LCCR_VSP_BIT, panel_info.vl_vsp) |
LCDBIT (LCCR_DP_BIT, panel_info.vl_dp) |
LCDBIT (LCCR_BPIX_BIT, panel_info.vl_bpix) |
LCDBIT (LCCR_LBW_BIT, panel_info.vl_lbw) |
LCDBIT (LCCR_SPLT_BIT, panel_info.vl_splt) |
LCDBIT (LCCR_CLOR_BIT, panel_info.vl_clor) |
LCDBIT (LCCR_TFT_BIT, panel_info.vl_tft);
#if 0
lccrtmp |= ((SIU_LEVEL5 / 2) << 12);
lccrtmp |= LCCR_EIEN;
#endif
lcdp->lcd_lccr = lccrtmp;
lcdp->lcd_lcsr = 0xFF; /* Clear pending interrupts */
/* Initialize LCD controller bus priorities.
*/
immr->im_siu_conf.sc_sdcr &= ~0x0f; /* RAID = LAID = 0 */
/* set SHFT/CLOCK division factor 4
* This needs to be set based upon display type and processor
* speed. The TFT displays run about 20 to 30 MHz.
* I was running 64 MHz processor speed.
* The value for this divider must be chosen so the result is
* an integer of the processor speed (i.e., divide by 3 with
* 64 MHz would be bad).
*/
immr->im_clkrst.car_sccr &= ~0x1F;
immr->im_clkrst.car_sccr |= LCD_DF; /* was 8 */
/* Enable LCD on port D.
*/
immr->im_ioport.iop_pdpar |= 0x1FFF;
immr->im_ioport.iop_pddir |= 0x1FFF;
/* Enable LCD_A/B/C on port B.
*/
immr->im_cpm.cp_pbpar |= 0x00005001;
immr->im_cpm.cp_pbdir |= 0x00005001;
/* Load the physical address of the linear frame buffer
* into the LCD controller.
* BIG NOTE: This has to be modified to load A and B depending
* upon the split mode of the LCD.
*/
lcdp->lcd_lcfaa = (ulong)lcdbase;
lcdp->lcd_lcfba = (ulong)lcdbase;
/* MORE HACKS...This must be updated according to 823 manual
* for different panels.
* Udi Finkelstein - done - see below:
* Note: You better not try unsupported combinations such as
* 4-bit wide passive dual scan LCD at 4/8 Bit color.
*/
lchcr_hpc_tmp =
(panel_info.vl_col *
(panel_info.vl_tft ? 8 :
(((2 - panel_info.vl_lbw) << /* 4 bit=2, 8-bit = 1 */
/* use << to mult by: single scan = 1, dual scan = 2 */
panel_info.vl_splt) *
(panel_info.vl_bpix | 1)))) >> 3; /* 2/4 BPP = 1, 8/16 BPP = 3 */
lcdp->lcd_lchcr = LCHCR_BO |
LCDBIT (LCHCR_AT_BIT, 4) |
LCDBIT (LCHCR_HPC_BIT, lchcr_hpc_tmp) |
panel_info.vl_wbl;
lcdp->lcd_lcvcr = LCDBIT (LCVCR_VPW_BIT, panel_info.vl_vpw) |
LCDBIT (LCVCR_LCD_AC_BIT, panel_info.vl_lcdac) |
LCDBIT (LCVCR_VPC_BIT, panel_info.vl_row) |
panel_info.vl_wbf;
}
/*----------------------------------------------------------------------*/
#if LCD_BPP == LCD_COLOR8
void
lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile cpm8xx_t *cp = &(immr->im_cpm);
unsigned short colreg, *cmap_ptr;
cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
colreg = ((red & 0x0F) << 8) |
((green & 0x0F) << 4) |
(blue & 0x0F) ;
*cmap_ptr = colreg;
debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %02X%02X\n",
regno, &(cp->lcd_cmap[regno * 2]),
red, green, blue,
cp->lcd_cmap[ regno * 2 ], cp->lcd_cmap[(regno * 2) + 1]);
}
#endif /* LCD_COLOR8 */
/*----------------------------------------------------------------------*/
ushort *configuration_get_cmap(void)
{
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
cpm8xx_t *cp = &(immr->im_cpm);
return (ushort *)&(cp->lcd_cmap[255 * sizeof(ushort)]);
}
#if defined(CONFIG_MPC823)
void fb_put_byte(uchar **fb, uchar **from)
{
*(*fb)++ = (255 - *(*from)++);
}
#endif
#ifdef CONFIG_LCD_LOGO
#include <bmp_logo.h>
void lcd_logo_set_cmap(void)
{
int i;
ushort *cmap;
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
cpm8xx_t *cp = &(immr->im_cpm);
cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET * sizeof(ushort)]);
for (i = 0; i < BMP_LOGO_COLORS; ++i)
*cmap++ = bmp_logo_palette[i];
}
#endif
void lcd_enable (void)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile lcd823_t *lcdp = &immr->im_lcd;
/* Enable the LCD panel */
immr->im_siu_conf.sc_sdcr |= (1 << (31 - 25)); /* LAM = 1 */
lcdp->lcd_lccr |= LCCR_PON;
}
/************************************************************************/
#endif /* CONFIG_LCD */

2
examples/standalone/Makefile
View File

@ -10,7 +10,6 @@ extra-$(CONFIG_SMC91111) += smc91111_eeprom
extra-$(CONFIG_SMC911X) += smc911x_eeprom
extra-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2
extra-$(CONFIG_MPC5xxx) += interrupt
extra-$(CONFIG_8xx) += test_burst timer
extra-$(CONFIG_MPC8260) += mem_to_mem_idma2intr
extra-$(CONFIG_PPC) += sched
@ -29,7 +28,6 @@ COBJS := $(ELF:=.o)
LIB = $(obj)/libstubs.o
LIBOBJS-$(CONFIG_PPC) += ppc_longjmp.o ppc_setjmp.o
LIBOBJS-$(CONFIG_8xx) += test_burst_lib.o
LIBOBJS-y += stubs.o
.SECONDARY: $(call objectify,$(COBJS))

284
examples/standalone/test_burst.c
View File

@ -1,284 +0,0 @@
/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*
* The test exercises SDRAM accesses in burst mode
*/
#include <common.h>
#include <exports.h>
#include <commproc.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <serial.h>
#include <watchdog.h>
#include "test_burst.h"
/* 8 MB test region of physical RAM */
#define TEST_PADDR 0x00800000
/* The uncached virtual region */
#define TEST_VADDR_NC 0x00800000
/* The cached virtual region */
#define TEST_VADDR_C 0x01000000
/* When an error is detected, the address where the error has been found,
and also the current and the expected data will be written to
the following flash address
*/
#define TEST_FLASH_ADDR 0x40100000
static void test_prepare (void);
static int test_burst_start (unsigned long size, unsigned long pattern);
static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached);
static int test_mmu_is_on(void);
static void test_desc(unsigned long size);
static void test_error(char * step, volatile void * addr, unsigned long val, unsigned long pattern);
static void signal_init(void);
static void signal_start(void);
static void signal_error(void);
static void test_usage(void);
static unsigned long test_pattern [] = {
0x00000000,
0xffffffff,
0x55555555,
0xaaaaaaaa,
};
int test_burst (int argc, char * const argv[])
{
unsigned long size = CACHE_LINE_SIZE;
unsigned int pass = 0;
int res = 0;
int i, j;
if (argc == 3) {
char * d;
for (size = 0, d = argv[1]; *d >= '0' && *d <= '9'; d++) {
size *= 10;
size += *d - '0';
}
if (size == 0 || *d) {
test_usage();
return 1;
}
for (d = argv[2]; *d >= '0' && *d <= '9'; d++) {
pass *= 10;
pass += *d - '0';
}
if (*d) {
test_usage();
return 1;
}
} else if (argc > 3) {
test_usage();
return 1;
}
size += (CACHE_LINE_SIZE - 1);
size &= ~(CACHE_LINE_SIZE - 1);
if (!test_mmu_is_on()) {
test_prepare();
}
test_desc(size);
for (j = 0; !pass || j < pass; j++) {
for (i = 0; i < sizeof(test_pattern) / sizeof(test_pattern[0]);
i++) {
res = test_burst_start(size, test_pattern[i]);
if (res != 0) {
goto Done;
}
}
printf ("Iteration #%d passed\n", j + 1);
if (tstc() && 0x03 == getc())
break;
}
Done:
return res;
}
static void test_prepare (void)
{
printf ("\n");
caches_init();
disable_interrupts();
mmu_init();
printf ("Interrupts are disabled\n");
printf ("I-Cache is ON\n");
printf ("D-Cache is ON\n");
printf ("MMU is ON\n");
printf ("\n");
test_map_8M (TEST_PADDR, TEST_VADDR_NC, 0);
test_map_8M (TEST_PADDR, TEST_VADDR_C, 1);
test_map_8M (TEST_FLASH_ADDR & 0xFF800000, TEST_FLASH_ADDR & 0xFF800000, 0);
/* Configure GPIO ports */
signal_init();
}
static int test_burst_start (unsigned long size, unsigned long pattern)
{
volatile unsigned long * vaddr_c = (unsigned long *)TEST_VADDR_C;
volatile unsigned long * vaddr_nc = (unsigned long *)TEST_VADDR_NC;
int i, n;
int res = 1;
printf ("Test pattern %08lx ...", pattern);
n = size / 4;
for (i = 0; i < n; i ++) {
vaddr_c [i] = pattern;
}
signal_start();
flush_dcache_range((unsigned long)vaddr_c, (unsigned long)(vaddr_c + n) - 1);
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_nc [i];
if (tmp != pattern) {
test_error("2a", vaddr_nc + i, tmp, pattern);
goto Done;
}
}
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_c [i];
if (tmp != pattern) {
test_error("2b", vaddr_c + i, tmp, pattern);
goto Done;
}
}
for (i = 0; i < n; i ++) {
vaddr_nc [i] = pattern;
}
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_nc [i];
if (tmp != pattern) {
test_error("3a", vaddr_nc + i, tmp, pattern);
goto Done;
}
}
signal_start();
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_c [i];
if (tmp != pattern) {
test_error("3b", vaddr_c + i, tmp, pattern);
goto Done;
}
}
res = 0;
Done:
printf(" %s\n", res == 0 ? "OK" : "");
return res;
}
static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached)
{
mtspr (MD_EPN, (vaddr & 0xFFFFFC00) | MI_EVALID);
mtspr (MD_TWC, MI_PS8MEG | MI_SVALID);
mtspr (MD_RPN, (paddr & 0xFFFFF000) | MI_BOOTINIT | (cached ? 0 : 2));
mtspr (MD_AP, MI_Kp);
}
static int test_mmu_is_on(void)
{
unsigned long msr;
asm volatile("mfmsr %0" : "=r" (msr) :);
return msr & MSR_DR;
}
static void test_desc(unsigned long size)
{
printf(
"The following tests will be conducted:\n"
"1) Map %ld-byte region of physical RAM at 0x%08x\n"
" into two virtual regions:\n"
" one cached at 0x%08x and\n"
" the the other uncached at 0x%08x.\n",
size, TEST_PADDR, TEST_VADDR_NC, TEST_VADDR_C);
puts(
"2) Fill the cached region with a pattern, and flush the cache\n"
"2a) Check the uncached region to match the pattern\n"
"2b) Check the cached region to match the pattern\n"
"3) Fill the uncached region with a pattern\n"
"3a) Check the cached region to match the pattern\n"
"3b) Check the uncached region to match the pattern\n"
"2b) Change the patterns and go to step 2\n"
"\n"
);
}
static void test_error(
char * step, volatile void * addr, unsigned long val, unsigned long pattern)
{
volatile unsigned long * p = (void *)TEST_FLASH_ADDR;
signal_error();
p[0] = (unsigned long)addr;
p[1] = val;
p[2] = pattern;
printf ("\nError at step %s, addr %08lx: read %08lx, pattern %08lx",
step, (unsigned long)addr, val, pattern);
}
static void signal_init(void)
{
#if defined(GPIO1_INIT)
GPIO1_INIT;
#endif
#if defined(GPIO2_INIT)
GPIO2_INIT;
#endif
}
static void signal_start(void)
{
#if defined(GPIO1_INIT)
if (GPIO1_DAT & GPIO1_BIT) {
GPIO1_DAT &= ~GPIO1_BIT;
} else {
GPIO1_DAT |= GPIO1_BIT;
}
#endif
}
static void signal_error(void)
{
#if defined(GPIO2_INIT)
if (GPIO2_DAT & GPIO2_BIT) {
GPIO2_DAT &= ~GPIO2_BIT;
} else {
GPIO2_DAT |= GPIO2_BIT;
}
#endif
}
static void test_usage(void)
{
printf("Usage: go 0x40004 [size] [count]\n");
}

22
examples/standalone/test_burst.h
View File

@ -1,22 +0,0 @@
/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _TEST_BURST_H
#define _TEST_BURST_H
/* Cache line size */
#define CACHE_LINE_SIZE 16
/* Binary logarithm of the cache line size */
#define LG_CACHE_LINE_SIZE 4
#ifndef __ASSEMBLY__
extern void mmu_init(void);
extern void caches_init(void);
extern void flush_dcache_range(unsigned long start, unsigned long stop);
#endif
#endif /* _TEST_BURST_H */

154
examples/standalone/test_burst_lib.S
View File

@ -1,154 +0,0 @@
/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include "test_burst.h"
.text
/*
* void mmu_init(void);
*
* This function turns the MMU on
*
* Three 8 MByte regions are mapped 1:1, uncached
* - SDRAM lower 8 MByte
* - SDRAM higher 8 MByte
* - IMMR
*/
.global mmu_init
mmu_init:
tlbia /* Invalidate all TLB entries */
li r8, 0
mtspr MI_CTR, r8 /* Set instruction control to zero */
lis r8, MD_RESETVAL@h
mtspr MD_CTR, r8 /* Set data TLB control */
/* Now map the lower 8 Meg into the TLBs. For this quick hack,
* we can load the instruction and data TLB registers with the
* same values.
*/
li r8, MI_EVALID /* Create EPN for address 0 */
mtspr MI_EPN, r8
mtspr MD_EPN, r8
li r8, MI_PS8MEG /* Set 8M byte page */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr MI_TWC, r8
mtspr MD_TWC, r8
li r8, MI_BOOTINIT|0x2 /* Create RPN for address 0 */
mtspr MI_RPN, r8 /* Store TLB entry */
mtspr MD_RPN, r8
lis r8, MI_Kp@h /* Set the protection mode */
mtspr MI_AP, r8
mtspr MD_AP, r8
/* Now map the higher 8 Meg into the TLBs. For this quick hack,
* we can load the instruction and data TLB registers with the
* same values.
*/
lwz r9,20(r2) /* gd->ram_size */
addis r9,r9,-0x80
mr r8, r9 /* Higher 8 Meg in SDRAM */
ori r8, r8, MI_EVALID /* Mark page valid */
mtspr MI_EPN, r8
mtspr MD_EPN, r8
li r8, MI_PS8MEG /* Set 8M byte page */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr MI_TWC, r8
mtspr MD_TWC, r8
mr r8, r9
ori r8, r8, MI_BOOTINIT|0x2
mtspr MI_RPN, r8 /* Store TLB entry */
mtspr MD_RPN, r8
lis r8, MI_Kp@h /* Set the protection mode */
mtspr MI_AP, r8
mtspr MD_AP, r8
/* Map another 8 MByte at the IMMR to get the processor
* internal registers (among other things).
*/
mfspr r9, 638 /* Get current IMMR */
andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */
mr r8, r9 /* Create vaddr for TLB */
ori r8, r8, MD_EVALID /* Mark it valid */
mtspr MD_EPN, r8
li r8, MD_PS8MEG /* Set 8M byte page */
ori r8, r8, MD_SVALID /* Make it valid */
mtspr MD_TWC, r8
mr r8, r9 /* Create paddr for TLB */
ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
mtspr MD_RPN, r8
/* We now have the lower and higher 8 Meg mapped into TLB entries,
* and the caches ready to work.
*/
mfmsr r0
ori r0,r0,MSR_DR|MSR_IR
mtspr SRR1,r0
mflr r0
mtspr SRR0,r0
SYNC
rfi /* enables MMU */
/*
* void caches_init(void);
*/
.globl caches_init
caches_init:
sync
mfspr r3, IC_CST /* Clear error bits */
mfspr r3, DC_CST
lis r3, IDC_UNALL@h /* Unlock all */
mtspr IC_CST, r3
mtspr DC_CST, r3
lis r3, IDC_INVALL@h /* Invalidate all */
mtspr IC_CST, r3
mtspr DC_CST, r3
lis r3, IDC_ENABLE@h /* Enable all */
mtspr IC_CST, r3
mtspr DC_CST, r3
blr
/*
* void flush_dcache_range(unsigned long start, unsigned long stop);
*/
.global flush_dcache_range
flush_dcache_range:
li r5,CACHE_LINE_SIZE-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,LG_CACHE_LINE_SIZE
beqlr
mtctr r4
1: dcbf 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
sync /* wait for dcbf's to get to ram */
blr
/*
* void disable_interrupts(void);
*/
.global disable_interrupts
disable_interrupts:
mfmsr r0
rlwinm r0,r0,0,17,15
mtmsr r0
blr

333
examples/standalone/timer.c
View File

@ -1,333 +0,0 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <commproc.h>
#include <mpc8xx_irq.h>
#include <exports.h>
DECLARE_GLOBAL_DATA_PTR;
#undef DEBUG
#define TIMER_PERIOD 1000000 /* 1 second clock */
static void timer_handler (void *arg);
/* Access functions for the Machine State Register */
static __inline__ unsigned long get_msr(void)
{
unsigned long msr;
asm volatile("mfmsr %0" : "=r" (msr) :);
return msr;
}
static __inline__ void set_msr(unsigned long msr)
{
asm volatile("mtmsr %0" : : "r" (msr));
}
/*
* Definitions to access the CPM Timer registers
* See 8xx_immap.h for Internal Memory Map layout,
* and commproc.h for CPM Interrupt vectors (aka "IRQ"s)
*/
typedef struct tid_8xx_cpmtimer_s {
int cpm_vec; /* CPM Interrupt Vector for this timer */
ushort *tgcrp; /* Pointer to Timer Global Config Reg. */
ushort *tmrp; /* Pointer to Timer Mode Register */
ushort *trrp; /* Pointer to Timer Reference Register */
ushort *tcrp; /* Pointer to Timer Capture Register */
ushort *tcnp; /* Pointer to Timer Counter Register */
ushort *terp; /* Pointer to Timer Event Register */
} tid_8xx_cpmtimer_t;
#ifndef CLOCKRATE
# define CLOCKRATE 64
#endif
#define CPMT_CLOCK_DIV 16
#define CPMT_MAX_PRESCALER 256
#define CPMT_MAX_REFERENCE 65535 /* max. unsigned short */
#define CPMT_MAX_TICKS (CPMT_MAX_REFERENCE * CPMT_MAX_PRESCALER)
#define CPMT_MAX_TICKS_WITH_DIV (CPMT_MAX_REFERENCE * CPMT_MAX_PRESCALER * CPMT_CLOCK_DIV)
#define CPMT_MAX_INTERVAL (CPMT_MAX_TICKS_WITH_DIV / CLOCKRATE)
/* For now: always use max. prescaler value */
#define CPMT_PRESCALER (CPMT_MAX_PRESCALER)
/* CPM Timer Event Register Bits */
#define CPMT_EVENT_CAP 0x0001 /* Capture Event */
#define CPMT_EVENT_REF 0x0002 /* Reference Counter Event */
/* CPM Timer Global Config Register */
#define CPMT_GCR_RST 0x0001 /* Reset Timer */
#define CPMT_GCR_STP 0x0002 /* Stop Timer */
#define CPMT_GCR_FRZ 0x0004 /* Freeze Timer */
#define CPMT_GCR_GM_CAS 0x0008 /* Gate Mode / Cascade Timers */
#define CPMT_GCR_MASK (CPMT_GCR_RST|CPMT_GCR_STP|CPMT_GCR_FRZ|CPMT_GCR_GM_CAS)
/* CPM Timer Mode register */
#define CPMT_MR_GE 0x0001 /* Gate Enable */
#define CPMT_MR_ICLK_CASC 0x0000 /* Clock internally cascaded */
#define CPMT_MR_ICLK_CLK 0x0002 /* Clock = system clock */
#define CPMT_MR_ICLK_CLKDIV 0x0004 /* Clock = system clock / 16 */
#define CPMT_MR_ICLK_TIN 0x0006 /* Clock = TINx signal */
#define CPMT_MR_FRR 0x0008 /* Free Run / Restart */
#define CPMT_MR_ORI 0x0010 /* Out. Reference Interrupt En. */
#define CPMT_MR_OM 0x0020 /* Output Mode */
#define CPMT_MR_CE_DIS 0x0000 /* Capture/Interrupt disabled */
#define CPMT_MR_CE_RISE 0x0040 /* Capt./Interr. on rising TIN */
#define CPMT_MR_CE_FALL 0x0080 /* Capt./Interr. on falling TIN */
#define CPMT_MR_CE_ANY 0x00C0 /* Capt./Interr. on any TIN edge*/
/*
* which CPM timer to use - index starts at 0 (= timer 1)
*/
#define TID_TIMER_ID 0 /* use CPM timer 1 */
void setPeriod (tid_8xx_cpmtimer_t *hwp, ulong interval);
static const char usage[] = "\n[q, b, e, ?] ";
int timer (int argc, char * const argv[])
{
cpmtimer8xx_t *cpmtimerp; /* Pointer to the CPM Timer structure */
tid_8xx_cpmtimer_t hw;
tid_8xx_cpmtimer_t *hwp = &hw;
int c;
int running;
app_startup(argv);
/* Pointer to CPM Timer structure */
cpmtimerp = &((immap_t *) gd->bd->bi_immr_base)->im_cpmtimer;
printf ("TIMERS=0x%x\n", (unsigned) cpmtimerp);
/* Initialize pointers depending on which timer we use */
switch (TID_TIMER_ID) {
case 0:
hwp->tmrp = &(cpmtimerp->cpmt_tmr1);
hwp->trrp = &(cpmtimerp->cpmt_trr1);
hwp->tcrp = &(cpmtimerp->cpmt_tcr1);
hwp->tcnp = &(cpmtimerp->cpmt_tcn1);
hwp->terp = &(cpmtimerp->cpmt_ter1);
hwp->cpm_vec = CPMVEC_TIMER1;
break;
case 1:
hwp->tmrp = &(cpmtimerp->cpmt_tmr2);
hwp->trrp = &(cpmtimerp->cpmt_trr2);
hwp->tcrp = &(cpmtimerp->cpmt_tcr2);
hwp->tcnp = &(cpmtimerp->cpmt_tcn2);
hwp->terp = &(cpmtimerp->cpmt_ter2);
hwp->cpm_vec = CPMVEC_TIMER2;
break;
case 2:
hwp->tmrp = &(cpmtimerp->cpmt_tmr3);
hwp->trrp = &(cpmtimerp->cpmt_trr3);
hwp->tcrp = &(cpmtimerp->cpmt_tcr3);
hwp->tcnp = &(cpmtimerp->cpmt_tcn3);
hwp->terp = &(cpmtimerp->cpmt_ter3);
hwp->cpm_vec = CPMVEC_TIMER3;
break;
case 3:
hwp->tmrp = &(cpmtimerp->cpmt_tmr4);
hwp->trrp = &(cpmtimerp->cpmt_trr4);
hwp->tcrp = &(cpmtimerp->cpmt_tcr4);
hwp->tcnp = &(cpmtimerp->cpmt_tcn4);
hwp->terp = &(cpmtimerp->cpmt_ter4);
hwp->cpm_vec = CPMVEC_TIMER4;
break;
}
hwp->tgcrp = &cpmtimerp->cpmt_tgcr;
printf ("Using timer %d\n"
"tgcr @ 0x%x, tmr @ 0x%x, trr @ 0x%x,"
" tcr @ 0x%x, tcn @ 0x%x, ter @ 0x%x\n",
TID_TIMER_ID + 1,
(unsigned) hwp->tgcrp,
(unsigned) hwp->tmrp,
(unsigned) hwp->trrp,
(unsigned) hwp->tcrp,
(unsigned) hwp->tcnp,
(unsigned) hwp->terp
);
/* reset timer */
*hwp->tgcrp &= ~(CPMT_GCR_MASK << TID_TIMER_ID);
/* clear all events */
*hwp->terp = (CPMT_EVENT_CAP | CPMT_EVENT_REF);
puts(usage);
running = 0;
while ((c = getc()) != 'q') {
if (c == 'b') {
setPeriod (hwp, TIMER_PERIOD); /* Set period and start ticking */
/* Install interrupt handler (enable timer in CIMR) */
install_hdlr (hwp->cpm_vec, timer_handler, hwp);
printf ("Enabling timer\n");
/* enable timer */
*hwp->tgcrp |= (CPMT_GCR_RST << TID_TIMER_ID);
running = 1;
#ifdef DEBUG
printf ("tgcr=0x%x, tmr=0x%x, trr=0x%x,"
" tcr=0x%x, tcn=0x%x, ter=0x%x\n",
*hwp->tgcrp, *hwp->tmrp, *hwp->trrp,
*hwp->tcrp, *hwp->tcnp, *hwp->terp
);
#endif
} else if (c == 'e') {
printf ("Stopping timer\n");
*hwp->tgcrp &= ~(CPMT_GCR_MASK << TID_TIMER_ID);
running = 0;
#ifdef DEBUG
printf ("tgcr=0x%x, tmr=0x%x, trr=0x%x,"
" tcr=0x%x, tcn=0x%x, ter=0x%x\n",
*hwp->tgcrp, *hwp->tmrp, *hwp->trrp,
*hwp->tcrp, *hwp->tcnp, *hwp->terp
);
#endif
/* Uninstall interrupt handler */
free_hdlr (hwp->cpm_vec);
} else if (c == '?') {
#ifdef DEBUG
cpic8xx_t *cpm_icp = &((immap_t *) gd->bd->bi_immr_base)->im_cpic;
sysconf8xx_t *siup = &((immap_t *) gd->bd->bi_immr_base)->im_siu_conf;
#endif
printf ("\ntgcr=0x%x, tmr=0x%x, trr=0x%x,"
" tcr=0x%x, tcn=0x%x, ter=0x%x\n",
*hwp->tgcrp, *hwp->tmrp, *hwp->trrp,
*hwp->tcrp, *hwp->tcnp, *hwp->terp
);
#ifdef DEBUG
printf ("SIUMCR=0x%08lx, SYPCR=0x%08lx,"
" SIMASK=0x%08lx, SIPEND=0x%08lx\n",
siup->sc_siumcr,
siup->sc_sypcr,
siup->sc_simask,
siup->sc_sipend
);
printf ("CIMR=0x%08lx, CICR=0x%08lx, CIPR=0x%08lx\n",
cpm_icp->cpic_cimr,
cpm_icp->cpic_cicr,
cpm_icp->cpic_cipr
);
#endif
} else {
printf ("\nEnter: q - quit, b - start timer, e - stop timer, ? - get status\n");
}
puts(usage);
}
if (running) {
printf ("Stopping timer\n");
*hwp->tgcrp &= ~(CPMT_GCR_MASK << TID_TIMER_ID);
free_hdlr (hwp->cpm_vec);
}
return (0);
}
/* Set period in microseconds and start.
* Truncate to maximum period if more than this is requested - but warn about it.
*/
void setPeriod (tid_8xx_cpmtimer_t *hwp, ulong interval)
{
unsigned short prescaler;
unsigned long ticks;
printf ("Set interval %ld us\n", interval);
/* Warn if requesting longer period than possible */
if (interval > CPMT_MAX_INTERVAL) {
printf ("Truncate interval %ld to maximum (%d)\n",
interval, CPMT_MAX_INTERVAL);
interval = CPMT_MAX_INTERVAL;
}
/*
* Check if we want to use clock divider:
* Since the reference counter can be incremented only in integer steps,
* we try to keep it as big as possible to allow the resulting period to be
* as precise as possible.
*/
/* prescaler, enable interrupt, restart after ref count is reached */
prescaler = (ushort) ((CPMT_PRESCALER - 1) << 8) |
CPMT_MR_ORI |
CPMT_MR_FRR;
ticks = ((ulong) CLOCKRATE * interval);
if (ticks > CPMT_MAX_TICKS) {
ticks /= CPMT_CLOCK_DIV;
prescaler |= CPMT_MR_ICLK_CLKDIV; /* use system clock divided by 16 */
} else {
prescaler |= CPMT_MR_ICLK_CLK; /* use system clock without divider */
}
#ifdef DEBUG
printf ("clock/%d, prescale factor %d, reference %ld, ticks %ld\n",
(ticks > CPMT_MAX_TICKS) ? CPMT_CLOCK_DIV : 1,
CPMT_PRESCALER,
(ticks / CPMT_PRESCALER),
ticks
);
#endif
/* set prescaler register */
*hwp->tmrp = prescaler;
/* clear timer counter */
*hwp->tcnp = 0;
/* set reference register */
*hwp->trrp = (unsigned short) (ticks / CPMT_PRESCALER);
#ifdef DEBUG
printf ("tgcr=0x%x, tmr=0x%x, trr=0x%x,"
" tcr=0x%x, tcn=0x%x, ter=0x%x\n",
*hwp->tgcrp, *hwp->tmrp, *hwp->trrp,
*hwp->tcrp, *hwp->tcnp, *hwp->terp
);
#endif
}
/*
* Handler for CPMVEC_TIMER1 interrupt
*/
static
void timer_handler (void *arg)
{
tid_8xx_cpmtimer_t *hwp = (tid_8xx_cpmtimer_t *)arg;
/* printf ("** TER1=%04x ** ", *hwp->terp); */
/* just for demonstration */
printf (".");
/* clear all possible events: Ref. and Cap. */
*hwp->terp = (CPMT_EVENT_CAP | CPMT_EVENT_REF);
}

2
include/asm-generic/u-boot.h
View File

@ -41,7 +41,7 @@ typedef struct bd_info {
unsigned long bi_dsp_freq; /* dsp core frequency */
unsigned long bi_ddr_freq; /* ddr frequency */
#endif
#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_MPC8260) \
#if defined(CONFIG_5xx) || defined(CONFIG_MPC8260) \
|| defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
unsigned long bi_immr_base; /* base of IMMR register */
#endif

849
include/commproc.h
View File

@ -1,849 +0,0 @@
/*
* MPC8xx Communication Processor Module.
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
*
* (C) Copyright 2000-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* This file contains structures and information for the communication
* processor channels. Some CPM control and status is available
* throught the MPC8xx internal memory map. See immap.h for details.
* This file only contains what I need for the moment, not the total
* CPM capabilities. I (or someone else) will add definitions as they
* are needed. -- Dan
*
*/
#ifndef __CPM_8XX__
#define __CPM_8XX__
#include <asm/8xx_immap.h>
/* CPM Command register.
*/
#define CPM_CR_RST ((ushort)0x8000)
#define CPM_CR_OPCODE ((ushort)0x0f00)
#define CPM_CR_CHAN ((ushort)0x00f0)
#define CPM_CR_FLG ((ushort)0x0001)
/* Some commands (there are more...later)
*/
#define CPM_CR_INIT_TRX ((ushort)0x0000)
#define CPM_CR_INIT_RX ((ushort)0x0001)
#define CPM_CR_INIT_TX ((ushort)0x0002)
#define CPM_CR_HUNT_MODE ((ushort)0x0003)
#define CPM_CR_STOP_TX ((ushort)0x0004)
#define CPM_CR_RESTART_TX ((ushort)0x0006)
#define CPM_CR_SET_GADDR ((ushort)0x0008)
/* Channel numbers.
*/
#define CPM_CR_CH_SCC1 ((ushort)0x0000)
#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
#define CPM_CR_CH_SCC2 ((ushort)0x0004)
#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI/IDMA2/Timers */
#define CPM_CR_CH_SCC3 ((ushort)0x0008)
#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
#define CPM_CR_CH_SCC4 ((ushort)0x000c)
#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
/*
* DPRAM defines and allocation functions
*/
#define CPM_SERIAL_BASE 0x0800
#define CPM_I2C_BASE 0x0820
#define CPM_SPI_BASE 0x0840
#define CPM_FEC_BASE 0x0860
#define CPM_SERIAL2_BASE 0x08E0
#define CPM_SCC_BASE 0x0900
#define CPM_POST_BASE 0x0980
#define CPM_WLKBD_BASE 0x0a00
#ifndef CONFIG_SYS_CPM_POST_WORD_ADDR
#define CPM_POST_WORD_ADDR 0x07FC
#else
#define CPM_POST_WORD_ADDR CONFIG_SYS_CPM_POST_WORD_ADDR
#endif
#ifndef CONFIG_SYS_CPM_BOOTCOUNT_ADDR
#define CPM_BOOTCOUNT_ADDR (CPM_POST_WORD_ADDR - 2*sizeof(ulong))
#else
#define CPM_BOOTCOUNT_ADDR CONFIG_SYS_CPM_BOOTCOUNT_ADDR
#endif
#define BD_IIC_START ((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
/* Export the base address of the communication processor registers
* and dual port ram.
*/
extern cpm8xx_t *cpmp; /* Pointer to comm processor */
/* Buffer descriptors used by many of the CPM protocols.
*/
typedef struct cpm_buf_desc {
ushort cbd_sc; /* Status and Control */
ushort cbd_datlen; /* Data length in buffer */
uint cbd_bufaddr; /* Buffer address in host memory */
} cbd_t;
#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
#define BD_SC_BR ((ushort)0x0020) /* Break received */
#define BD_SC_FR ((ushort)0x0010) /* Framing error */
#define BD_SC_PR ((ushort)0x0008) /* Parity error */
#define BD_SC_OV ((ushort)0x0002) /* Overrun */
#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
/* Parameter RAM offsets.
*/
#define PROFF_SCC1 ((uint)0x0000)
#define PROFF_IIC ((uint)0x0080)
#define PROFF_REVNUM ((uint)0x00b0)
#define PROFF_SCC2 ((uint)0x0100)
#define PROFF_SPI ((uint)0x0180)
#define PROFF_SCC3 ((uint)0x0200)
#define PROFF_SMC1 ((uint)0x0280)
#define PROFF_SCC4 ((uint)0x0300)
#define PROFF_SMC2 ((uint)0x0380)
/* Define enough so I can at least use the serial port as a UART.
*/
typedef struct smc_uart {
ushort smc_rbase; /* Rx Buffer descriptor base address */
ushort smc_tbase; /* Tx Buffer descriptor base address */
u_char smc_rfcr; /* Rx function code */
u_char smc_tfcr; /* Tx function code */
ushort smc_mrblr; /* Max receive buffer length */
uint smc_rstate; /* Internal */
uint smc_idp; /* Internal */
ushort smc_rbptr; /* Internal */
ushort smc_ibc; /* Internal */
uint smc_rxtmp; /* Internal */
uint smc_tstate; /* Internal */
uint smc_tdp; /* Internal */
ushort smc_tbptr; /* Internal */
ushort smc_tbc; /* Internal */
uint smc_txtmp; /* Internal */
ushort smc_maxidl; /* Maximum idle characters */
ushort smc_tmpidl; /* Temporary idle counter */
ushort smc_brklen; /* Last received break length */
ushort smc_brkec; /* rcv'd break condition counter */
ushort smc_brkcr; /* xmt break count register */
ushort smc_rmask; /* Temporary bit mask */
u_char res1[8];
ushort smc_rpbase; /* Relocation pointer */
} smc_uart_t;
/* Function code bits.
*/
#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
/* SMC uart mode register.
*/
#define SMCMR_REN ((ushort)0x0001)
#define SMCMR_TEN ((ushort)0x0002)
#define SMCMR_DM ((ushort)0x000c)
#define SMCMR_SM_GCI ((ushort)0x0000)
#define SMCMR_SM_UART ((ushort)0x0020)
#define SMCMR_SM_TRANS ((ushort)0x0030)
#define SMCMR_SM_MASK ((ushort)0x0030)
#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
#define SMCMR_REVD SMCMR_PM_EVEN
#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
#define SMCMR_BS SMCMR_PEN
#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
/* SMC2 as Centronics parallel printer. It is half duplex, in that
* it can only receive or transmit. The parameter ram values for
* each direction are either unique or properly overlap, so we can
* include them in one structure.
*/
typedef struct smc_centronics {
ushort scent_rbase;
ushort scent_tbase;
u_char scent_cfcr;
u_char scent_smask;
ushort scent_mrblr;
uint scent_rstate;
uint scent_r_ptr;
ushort scent_rbptr;
ushort scent_r_cnt;
uint scent_rtemp;
uint scent_tstate;
uint scent_t_ptr;
ushort scent_tbptr;
ushort scent_t_cnt;
uint scent_ttemp;
ushort scent_max_sl;
ushort scent_sl_cnt;
ushort scent_character1;
ushort scent_character2;
ushort scent_character3;
ushort scent_character4;
ushort scent_character5;
ushort scent_character6;
ushort scent_character7;
ushort scent_character8;
ushort scent_rccm;
ushort scent_rccr;
} smc_cent_t;
/* Centronics Status Mask Register.
*/
#define SMC_CENT_F ((u_char)0x08)
#define SMC_CENT_PE ((u_char)0x04)
#define SMC_CENT_S ((u_char)0x02)
/* SMC Event and Mask register.
*/
#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
#define SMCM_BSY ((unsigned char)0x04)
#define SMCM_TX ((unsigned char)0x02)
#define SMCM_RX ((unsigned char)0x01)
/* Baud rate generators.
*/
#define CPM_BRG_RST ((uint)0x00020000)
#define CPM_BRG_EN ((uint)0x00010000)
#define CPM_BRG_EXTC_INT ((uint)0x00000000)
#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
#define CPM_BRG_ATB ((uint)0x00002000)
#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
#define CPM_BRG_DIV16 ((uint)0x00000001)
/* SI Clock Route Register
*/
#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
/* SCCs.
*/
#define SCC_GSMRH_IRP ((uint)0x00040000)
#define SCC_GSMRH_GDE ((uint)0x00010000)
#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
#define SCC_GSMRH_REVD ((uint)0x00002000)
#define SCC_GSMRH_TRX ((uint)0x00001000)
#define SCC_GSMRH_TTX ((uint)0x00000800)
#define SCC_GSMRH_CDP ((uint)0x00000400)
#define SCC_GSMRH_CTSP ((uint)0x00000200)
#define SCC_GSMRH_CDS ((uint)0x00000100)
#define SCC_GSMRH_CTSS ((uint)0x00000080)
#define SCC_GSMRH_TFL ((uint)0x00000040)
#define SCC_GSMRH_RFW ((uint)0x00000020)
#define SCC_GSMRH_TXSY ((uint)0x00000010)
#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
#define SCC_GSMRH_RTSM ((uint)0x00000002)
#define SCC_GSMRH_RSYN ((uint)0x00000001)
#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
#define SCC_GSMRL_TCI ((uint)0x10000000)
#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
#define SCC_GSMRL_RINV ((uint)0x02000000)
#define SCC_GSMRL_TINV ((uint)0x01000000)
#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
#define SCC_GSMRL_TEND ((uint)0x00040000)
#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
#define SCC_GSMRL_ENR ((uint)0x00000020)
#define SCC_GSMRL_ENT ((uint)0x00000010)
#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
#define SCC_TODR_TOD ((ushort)0x8000)
/* SCC Event and Mask register.
*/
#define SCCM_TXE ((unsigned char)0x10)
#define SCCM_BSY ((unsigned char)0x04)
#define SCCM_TX ((unsigned char)0x02)
#define SCCM_RX ((unsigned char)0x01)
typedef struct scc_param {
ushort scc_rbase; /* Rx Buffer descriptor base address */
ushort scc_tbase; /* Tx Buffer descriptor base address */
u_char scc_rfcr; /* Rx function code */
u_char scc_tfcr; /* Tx function code */
ushort scc_mrblr; /* Max receive buffer length */
uint scc_rstate; /* Internal */
uint scc_idp; /* Internal */
ushort scc_rbptr; /* Internal */
ushort scc_ibc; /* Internal */
uint scc_rxtmp; /* Internal */
uint scc_tstate; /* Internal */
uint scc_tdp; /* Internal */
ushort scc_tbptr; /* Internal */
ushort scc_tbc; /* Internal */
uint scc_txtmp; /* Internal */
uint scc_rcrc; /* Internal */
uint scc_tcrc; /* Internal */
} sccp_t;
/* Function code bits.
*/
#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
/* CPM Ethernet through SCCx.
*/
typedef struct scc_enet {
sccp_t sen_genscc;
uint sen_cpres; /* Preset CRC */
uint sen_cmask; /* Constant mask for CRC */
uint sen_crcec; /* CRC Error counter */
uint sen_alec; /* alignment error counter */
uint sen_disfc; /* discard frame counter */
ushort sen_pads; /* Tx short frame pad character */
ushort sen_retlim; /* Retry limit threshold */
ushort sen_retcnt; /* Retry limit counter */
ushort sen_maxflr; /* maximum frame length register */
ushort sen_minflr; /* minimum frame length register */
ushort sen_maxd1; /* maximum DMA1 length */
ushort sen_maxd2; /* maximum DMA2 length */
ushort sen_maxd; /* Rx max DMA */
ushort sen_dmacnt; /* Rx DMA counter */
ushort sen_maxb; /* Max BD byte count */
ushort sen_gaddr1; /* Group address filter */
ushort sen_gaddr2;
ushort sen_gaddr3;
ushort sen_gaddr4;
uint sen_tbuf0data0; /* Save area 0 - current frame */
uint sen_tbuf0data1; /* Save area 1 - current frame */
uint sen_tbuf0rba; /* Internal */
uint sen_tbuf0crc; /* Internal */
ushort sen_tbuf0bcnt; /* Internal */
ushort sen_paddrh; /* physical address (MSB) */
ushort sen_paddrm;
ushort sen_paddrl; /* physical address (LSB) */
ushort sen_pper; /* persistence */
ushort sen_rfbdptr; /* Rx first BD pointer */
ushort sen_tfbdptr; /* Tx first BD pointer */
ushort sen_tlbdptr; /* Tx last BD pointer */
uint sen_tbuf1data0; /* Save area 0 - current frame */
uint sen_tbuf1data1; /* Save area 1 - current frame */
uint sen_tbuf1rba; /* Internal */
uint sen_tbuf1crc; /* Internal */
ushort sen_tbuf1bcnt; /* Internal */
ushort sen_txlen; /* Tx Frame length counter */
ushort sen_iaddr1; /* Individual address filter */
ushort sen_iaddr2;
ushort sen_iaddr3;
ushort sen_iaddr4;
ushort sen_boffcnt; /* Backoff counter */
/* NOTE: Some versions of the manual have the following items
* incorrectly documented. Below is the proper order.
*/
ushort sen_taddrh; /* temp address (MSB) */
ushort sen_taddrm;
ushort sen_taddrl; /* temp address (LSB) */
} scc_enet_t;
/**********************************************************************
*
* Board specific configuration settings.
*
* Please note that we use the presence of a #define SCC_ENET and/or
* #define FEC_ENET to enable the SCC resp. FEC ethernet drivers.
**********************************************************************/
/*** BSEIP **********************************************************/
#ifdef CONFIG_BSEIP
/* This ENET stuff is for the MPC823 with ethernet on SCC2.
* This is unique to the BSE ip-Engine board.
*/
#define PROFF_ENET PROFF_SCC2
#define CPM_CR_ENET CPM_CR_CH_SCC2
#define SCC_ENET 1
#define PA_ENET_RXD ((ushort)0x0004)
#define PA_ENET_TXD ((ushort)0x0008)
#define PA_ENET_TCLK ((ushort)0x0100)
#define PA_ENET_RCLK ((ushort)0x0200)
#define PB_ENET_TENA ((uint)0x00002000)
#define PC_ENET_CLSN ((ushort)0x0040)
#define PC_ENET_RENA ((ushort)0x0080)
/* BSE uses port B and C bits for PHY control also.
*/
#define PB_BSE_POWERUP ((uint)0x00000004)
#define PB_BSE_FDXDIS ((uint)0x00008000)
#define PC_BSE_LOOPBACK ((ushort)0x0800)
#define SICR_ENET_MASK ((uint)0x0000ff00)
#define SICR_ENET_CLKRT ((uint)0x00002c00)
#endif /* CONFIG_BSEIP */
/*** KM8XX *********************************************************/
/* The KM8XX Service Module uses SCC3 for Ethernet */
#ifdef CONFIG_KM8XX
#define PROFF_ENET PROFF_SCC3 /* Ethernet on SCC3 */
#define CPM_CR_ENET CPM_CR_CH_SCC3
#define SCC_ENET 2
#define PA_ENET_RXD ((ushort)0x0010) /* PA 11 */
#define PA_ENET_TXD ((ushort)0x0020) /* PA 10 */
#define PA_ENET_RCLK ((ushort)0x1000) /* PA 3 CLK 5 */
#define PA_ENET_TCLK ((ushort)0x2000) /* PA 2 CLK 6 */
#define PC_ENET_TENA ((ushort)0x0004) /* PC 13 */
#define PC_ENET_RENA ((ushort)0x0200) /* PC 6 */
#define PC_ENET_CLSN ((ushort)0x0100) /* PC 7 */
/* Control bits in the SICR to route TCLK (CLK6) and RCLK (CLK5) to
* SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero.
*/
#define SICR_ENET_MASK ((uint)0x00FF0000)
#define SICR_ENET_CLKRT ((uint)0x00250000)
#endif /* CONFIG_KM8XX */
/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/
#if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
defined(CONFIG_TQM823L) || \
defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \
defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D)
/* Bits in parallel I/O port registers that have to be set/cleared
* to configure the pins for SCC2 use.
*/
#define PROFF_ENET PROFF_SCC2
#define CPM_CR_ENET CPM_CR_CH_SCC2
#define SCC_ENET 1
#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
* SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
*/
#define SICR_ENET_MASK ((uint)0x0000ff00)
#define SICR_ENET_CLKRT ((uint)0x00002600)
# ifdef CONFIG_FEC_ENET /* Use FEC for Fast Ethernet */
#define FEC_ENET
# endif /* CONFIG_FEC_ENET */
#endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */
/*** TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M *********************/
#if defined(CONFIG_TQM855L) || defined(CONFIG_TQM855M) || \
defined(CONFIG_TQM860L) || defined(CONFIG_TQM860M) || \
defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) || \
defined(CONFIG_TQM866L) || defined(CONFIG_TQM866M)
# ifdef CONFIG_SCC1_ENET /* use SCC for 10Mbps Ethernet */
/* Bits in parallel I/O port registers that have to be set/cleared
* to configure the pins for SCC1 use.
*/
#define PROFF_ENET PROFF_SCC1
#define CPM_CR_ENET CPM_CR_CH_SCC1
#define SCC_ENET 0
#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */
#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */
#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */
#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */
#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */
/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
* SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
*/
#define SICR_ENET_MASK ((uint)0x000000ff)
#define SICR_ENET_CLKRT ((uint)0x00000026)
# endif /* CONFIG_SCC1_ENET */
# ifdef CONFIG_FEC_ENET /* Use FEC for Fast Ethernet */
#define FEC_ENET
#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
# endif /* CONFIG_FEC_ENET */
#endif /* CONFIG_TQM855L/M, TQM860L/M, TQM862L/M */
/*********************************************************************/
/* SCC Event register as used by Ethernet.
*/
#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
/* SCC Mode Register (PSMR) as used by Ethernet.
*/
#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
/* Buffer descriptor control/status used by Ethernet receive.
*/
#define BD_ENET_RX_EMPTY ((ushort)0x8000)
#define BD_ENET_RX_WRAP ((ushort)0x2000)
#define BD_ENET_RX_INTR ((ushort)0x1000)
#define BD_ENET_RX_LAST ((ushort)0x0800)
#define BD_ENET_RX_FIRST ((ushort)0x0400)
#define BD_ENET_RX_MISS ((ushort)0x0100)
#define BD_ENET_RX_LG ((ushort)0x0020)
#define BD_ENET_RX_NO ((ushort)0x0010)
#define BD_ENET_RX_SH ((ushort)0x0008)
#define BD_ENET_RX_CR ((ushort)0x0004)
#define BD_ENET_RX_OV ((ushort)0x0002)
#define BD_ENET_RX_CL ((ushort)0x0001)
#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
/* Buffer descriptor control/status used by Ethernet transmit.
*/
#define BD_ENET_TX_READY ((ushort)0x8000)
#define BD_ENET_TX_PAD ((ushort)0x4000)
#define BD_ENET_TX_WRAP ((ushort)0x2000)
#define BD_ENET_TX_INTR ((ushort)0x1000)
#define BD_ENET_TX_LAST ((ushort)0x0800)
#define BD_ENET_TX_TC ((ushort)0x0400)
#define BD_ENET_TX_DEF ((ushort)0x0200)
#define BD_ENET_TX_HB ((ushort)0x0100)
#define BD_ENET_TX_LC ((ushort)0x0080)
#define BD_ENET_TX_RL ((ushort)0x0040)
#define BD_ENET_TX_RCMASK ((ushort)0x003c)
#define BD_ENET_TX_UN ((ushort)0x0002)
#define BD_ENET_TX_CSL ((ushort)0x0001)
#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
/* SCC as UART
*/
typedef struct scc_uart {
sccp_t scc_genscc;
uint scc_res1; /* Reserved */
uint scc_res2; /* Reserved */
ushort scc_maxidl; /* Maximum idle chars */
ushort scc_idlc; /* temp idle counter */
ushort scc_brkcr; /* Break count register */
ushort scc_parec; /* receive parity error counter */
ushort scc_frmec; /* receive framing error counter */
ushort scc_nosec; /* receive noise counter */
ushort scc_brkec; /* receive break condition counter */
ushort scc_brkln; /* last received break length */
ushort scc_uaddr1; /* UART address character 1 */
ushort scc_uaddr2; /* UART address character 2 */
ushort scc_rtemp; /* Temp storage */
ushort scc_toseq; /* Transmit out of sequence char */
ushort scc_char1; /* control character 1 */
ushort scc_char2; /* control character 2 */
ushort scc_char3; /* control character 3 */
ushort scc_char4; /* control character 4 */
ushort scc_char5; /* control character 5 */
ushort scc_char6; /* control character 6 */
ushort scc_char7; /* control character 7 */
ushort scc_char8; /* control character 8 */
ushort scc_rccm; /* receive control character mask */
ushort scc_rccr; /* receive control character register */
ushort scc_rlbc; /* receive last break character */
} scc_uart_t;
/* SCC Event and Mask registers when it is used as a UART.
*/
#define UART_SCCM_GLR ((ushort)0x1000)
#define UART_SCCM_GLT ((ushort)0x0800)
#define UART_SCCM_AB ((ushort)0x0200)
#define UART_SCCM_IDL ((ushort)0x0100)
#define UART_SCCM_GRA ((ushort)0x0080)
#define UART_SCCM_BRKE ((ushort)0x0040)
#define UART_SCCM_BRKS ((ushort)0x0020)
#define UART_SCCM_CCR ((ushort)0x0008)
#define UART_SCCM_BSY ((ushort)0x0004)
#define UART_SCCM_TX ((ushort)0x0002)
#define UART_SCCM_RX ((ushort)0x0001)
/* The SCC PSMR when used as a UART.
*/
#define SCU_PSMR_FLC ((ushort)0x8000)
#define SCU_PSMR_SL ((ushort)0x4000)
#define SCU_PSMR_CL ((ushort)0x3000)
#define SCU_PSMR_UM ((ushort)0x0c00)
#define SCU_PSMR_FRZ ((ushort)0x0200)
#define SCU_PSMR_RZS ((ushort)0x0100)
#define SCU_PSMR_SYN ((ushort)0x0080)
#define SCU_PSMR_DRT ((ushort)0x0040)
#define SCU_PSMR_PEN ((ushort)0x0010)
#define SCU_PSMR_RPM ((ushort)0x000c)
#define SCU_PSMR_REVP ((ushort)0x0008)
#define SCU_PSMR_TPM ((ushort)0x0003)
#define SCU_PSMR_TEVP ((ushort)0x0003)
/* CPM Transparent mode SCC.
*/
typedef struct scc_trans {
sccp_t st_genscc;
uint st_cpres; /* Preset CRC */
uint st_cmask; /* Constant mask for CRC */
} scc_trans_t;
#define BD_SCC_TX_LAST ((ushort)0x0800)
/* IIC parameter RAM.
*/
typedef struct iic {
ushort iic_rbase; /* Rx Buffer descriptor base address */
ushort iic_tbase; /* Tx Buffer descriptor base address */
u_char iic_rfcr; /* Rx function code */
u_char iic_tfcr; /* Tx function code */
ushort iic_mrblr; /* Max receive buffer length */
uint iic_rstate; /* Internal */
uint iic_rdp; /* Internal */
ushort iic_rbptr; /* Internal */
ushort iic_rbc; /* Internal */
uint iic_rxtmp; /* Internal */
uint iic_tstate; /* Internal */
uint iic_tdp; /* Internal */
ushort iic_tbptr; /* Internal */
ushort iic_tbc; /* Internal */
uint iic_txtmp; /* Internal */
uint iic_res; /* reserved */
ushort iic_rpbase; /* Relocation pointer */
ushort iic_res2; /* reserved */
} iic_t;
/* SPI parameter RAM.
*/
typedef struct spi {
ushort spi_rbase; /* Rx Buffer descriptor base address */
ushort spi_tbase; /* Tx Buffer descriptor base address */
u_char spi_rfcr; /* Rx function code */
u_char spi_tfcr; /* Tx function code */
ushort spi_mrblr; /* Max receive buffer length */
uint spi_rstate; /* Internal */
uint spi_rdp; /* Internal */
ushort spi_rbptr; /* Internal */
ushort spi_rbc; /* Internal */
uint spi_rxtmp; /* Internal */
uint spi_tstate; /* Internal */
uint spi_tdp; /* Internal */
ushort spi_tbptr; /* Internal */
ushort spi_tbc; /* Internal */
uint spi_txtmp; /* Internal */
uint spi_res;
ushort spi_rpbase; /* Relocation pointer */
ushort spi_res2;
} spi_t;
/* SPI Mode register.
*/
#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
#define SPMODE_EN ((ushort)0x0100) /* Enable */
#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
#define SPMODE_PM(x) ((x) &0xF)
/* HDLC parameter RAM.
*/
typedef struct hdlc_pram_s {
/*
* SCC parameter RAM
*/
ushort rbase; /* Rx Buffer descriptor base address */
ushort tbase; /* Tx Buffer descriptor base address */
uchar rfcr; /* Rx function code */
uchar tfcr; /* Tx function code */
ushort mrblr; /* Rx buffer length */
ulong rstate; /* Rx internal state */
ulong rptr; /* Rx internal data pointer */
ushort rbptr; /* rb BD Pointer */
ushort rcount; /* Rx internal byte count */
ulong rtemp; /* Rx temp */
ulong tstate; /* Tx internal state */
ulong tptr; /* Tx internal data pointer */
ushort tbptr; /* Tx BD pointer */
ushort tcount; /* Tx byte count */
ulong ttemp; /* Tx temp */
ulong rcrc; /* temp receive CRC */
ulong tcrc; /* temp transmit CRC */
/*
* HDLC specific parameter RAM
*/
uchar res[4]; /* reserved */
ulong c_mask; /* CRC constant */
ulong c_pres; /* CRC preset */
ushort disfc; /* discarded frame counter */
ushort crcec; /* CRC error counter */
ushort abtsc; /* abort sequence counter */
ushort nmarc; /* nonmatching address rx cnt */
ushort retrc; /* frame retransmission cnt */
ushort mflr; /* maximum frame length reg */
ushort max_cnt; /* maximum length counter */
ushort rfthr; /* received frames threshold */
ushort rfcnt; /* received frames count */
ushort hmask; /* user defined frm addr mask */
ushort haddr1; /* user defined frm address 1 */
ushort haddr2; /* user defined frm address 2 */
ushort haddr3; /* user defined frm address 3 */
ushort haddr4; /* user defined frm address 4 */
ushort tmp; /* temp */
ushort tmp_mb; /* temp */
} hdlc_pram_t;
/* CPM interrupts. There are nearly 32 interrupts generated by CPM
* channels or devices. All of these are presented to the PPC core
* as a single interrupt. The CPM interrupt handler dispatches its
* own handlers, in a similar fashion to the PPC core handler. We
* use the table as defined in the manuals (i.e. no special high
* priority and SCC1 == SCCa, etc...).
*/
#define CPMVEC_NR 32
#define CPMVEC_OFFSET 0x00010000
#define CPMVEC_PIO_PC15 ((ushort)0x1f | CPMVEC_OFFSET)
#define CPMVEC_SCC1 ((ushort)0x1e | CPMVEC_OFFSET)
#define CPMVEC_SCC2 ((ushort)0x1d | CPMVEC_OFFSET)
#define CPMVEC_SCC3 ((ushort)0x1c | CPMVEC_OFFSET)
#define CPMVEC_SCC4 ((ushort)0x1b | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC14 ((ushort)0x1a | CPMVEC_OFFSET)
#define CPMVEC_TIMER1 ((ushort)0x19 | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC13 ((ushort)0x18 | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC12 ((ushort)0x17 | CPMVEC_OFFSET)
#define CPMVEC_SDMA_CB_ERR ((ushort)0x16 | CPMVEC_OFFSET)
#define CPMVEC_IDMA1 ((ushort)0x15 | CPMVEC_OFFSET)
#define CPMVEC_IDMA2 ((ushort)0x14 | CPMVEC_OFFSET)
#define CPMVEC_TIMER2 ((ushort)0x12 | CPMVEC_OFFSET)
#define CPMVEC_RISCTIMER ((ushort)0x11 | CPMVEC_OFFSET)
#define CPMVEC_I2C ((ushort)0x10 | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC11 ((ushort)0x0f | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC10 ((ushort)0x0e | CPMVEC_OFFSET)
#define CPMVEC_TIMER3 ((ushort)0x0c | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC9 ((ushort)0x0b | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC8 ((ushort)0x0a | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC7 ((ushort)0x09 | CPMVEC_OFFSET)
#define CPMVEC_TIMER4 ((ushort)0x07 | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC6 ((ushort)0x06 | CPMVEC_OFFSET)
#define CPMVEC_SPI ((ushort)0x05 | CPMVEC_OFFSET)
#define CPMVEC_SMC1 ((ushort)0x04 | CPMVEC_OFFSET)
#define CPMVEC_SMC2 ((ushort)0x03 | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC5 ((ushort)0x02 | CPMVEC_OFFSET)
#define CPMVEC_PIO_PC4 ((ushort)0x01 | CPMVEC_OFFSET)
#define CPMVEC_ERROR ((ushort)0x00 | CPMVEC_OFFSET)
extern void irq_install_handler(int vec, void (*handler)(void *), void *dev_id);
/* CPM interrupt configuration vector.
*/
#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
#endif /* __CPM_8XX__ */

1
include/configs/CPCI4052.h
View File

@ -139,7 +139,6 @@
* IDE/ATA stuff
*-----------------------------------------------------------------------
*/
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
#undef CONFIG_IDE_LED /* no led for ide supported */
#define CONFIG_IDE_RESET 1 /* reset for ide supported */

1
include/configs/MIP405.h
View File

@ -306,7 +306,6 @@
#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */
#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
#undef CONFIG_IDE_LED /* no led for ide supported */
#define CONFIG_IDE_RESET /* reset for ide supported... */
#define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */

Some files were not shown because too many files have changed in this diff Show More