mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-25 13:14:19 +08:00
mx6sl: Add initial support for mx6slevk board
mx6slevk board is a development board from Freescale based on the mx6 solo-lite processor. For details about mx6slevk, please refer to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6SLEVK&parentCode=i.MX6SL&fpsp=1 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
This commit is contained in:
Fabio Estevam
Stefano Babic
parent
25b4aa146a
commit
57ca432fb9
@ -664,6 +664,7 @@ Fabio Estevam <fabio.estevam@freescale.com>
|
||||
mx6qsabresd i.MX6Q
|
||||
mx6qsabreauto i.MX6Q
|
||||
wandboard i.MX6DL/S
|
||||
mx6slevk i.MX6SL
|
||||
|
||||
Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
|
||||
|
||||
|
||||
28
board/freescale/mx6slevk/Makefile
Normal file
28
board/freescale/mx6slevk/Makefile
Normal file
@ -0,0 +1,28 @@
|
||||
# (C) Copyright 2013 Freescale Semiconductor, Inc.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
COBJS := mx6slevk.o
|
||||
|
||||
SRCS := $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS)
|
||||
$(call cmd_link_o_target, $(OBJS))
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
118
board/freescale/mx6slevk/imximage.cfg
Normal file
118
board/freescale/mx6slevk/imximage.cfg
Normal file
@ -0,0 +1,118 @@
|
||||
/*
|
||||
* Copyright (C) 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License or (at your option) any later version.
|
||||
*
|
||||
* Refer docs/README.imxmage for more details about how-to configure
|
||||
* and create imximage boot image
|
||||
*
|
||||
* The syntax is taken as close as possible with the kwbimage
|
||||
*/
|
||||
|
||||
/* image version */
|
||||
|
||||
IMAGE_VERSION 2
|
||||
|
||||
/*
|
||||
* Boot Device : one of
|
||||
* spi, sd (the board has no nand neither onenand)
|
||||
*/
|
||||
|
||||
BOOT_FROM sd
|
||||
|
||||
/*
|
||||
* Device Configuration Data (DCD)
|
||||
*
|
||||
* Each entry must have the format:
|
||||
* Addr-type Address Value
|
||||
*
|
||||
* where:
|
||||
* Addr-type register length (1,2 or 4 bytes)
|
||||
* Address absolute address of the register
|
||||
* value value to be stored in the register
|
||||
*/
|
||||
DATA 4 0x020c4018 0x00260324
|
||||
|
||||
DATA 4 0x020c4068 0xffffffff
|
||||
DATA 4 0x020c406c 0xffffffff
|
||||
DATA 4 0x020c4070 0xffffffff
|
||||
DATA 4 0x020c4074 0xffffffff
|
||||
DATA 4 0x020c4078 0xffffffff
|
||||
DATA 4 0x020c407c 0xffffffff
|
||||
DATA 4 0x020c4080 0xffffffff
|
||||
|
||||
DATA 4 0x020e0344 0x00003030
|
||||
DATA 4 0x020e0348 0x00003030
|
||||
DATA 4 0x020e034c 0x00003030
|
||||
DATA 4 0x020e0350 0x00003030
|
||||
DATA 4 0x020e030c 0x00000030
|
||||
DATA 4 0x020e0310 0x00000030
|
||||
DATA 4 0x020e0314 0x00000030
|
||||
DATA 4 0x020e0318 0x00000030
|
||||
DATA 4 0x020e0300 0x00000030
|
||||
DATA 4 0x020e031c 0x00000030
|
||||
DATA 4 0x020e0338 0x00000028
|
||||
DATA 4 0x020e0320 0x00000030
|
||||
DATA 4 0x020e032c 0x00000000
|
||||
DATA 4 0x020e033c 0x00000008
|
||||
DATA 4 0x020e0340 0x00000008
|
||||
DATA 4 0x020e05c4 0x00000030
|
||||
DATA 4 0x020e05cc 0x00000030
|
||||
DATA 4 0x020e05d4 0x00000030
|
||||
DATA 4 0x020e05d8 0x00000030
|
||||
DATA 4 0x020e05ac 0x00000030
|
||||
DATA 4 0x020e05c8 0x00000030
|
||||
DATA 4 0x020e05b0 0x00020000
|
||||
DATA 4 0x020e05b4 0x00000000
|
||||
DATA 4 0x020e05c0 0x00020000
|
||||
DATA 4 0x020e05d0 0x00080000
|
||||
|
||||
DATA 4 0x021b001c 0x00008000
|
||||
DATA 4 0x021b085c 0x1b4700c7
|
||||
DATA 4 0x021b0800 0xa1390003
|
||||
DATA 4 0x021b0890 0x00300000
|
||||
DATA 4 0x021b08b8 0x00000800
|
||||
DATA 4 0x021b081c 0x33333333
|
||||
DATA 4 0x021b0820 0x33333333
|
||||
DATA 4 0x021b0824 0x33333333
|
||||
DATA 4 0x021b0828 0x33333333
|
||||
DATA 4 0x021b082c 0xf3333333
|
||||
DATA 4 0x021b0830 0xf3333333
|
||||
DATA 4 0x021b0834 0xf3333333
|
||||
DATA 4 0x021b0838 0xf3333333
|
||||
DATA 4 0x021b0848 0x4241444a
|
||||
DATA 4 0x021b0850 0x3030312b
|
||||
DATA 4 0x021b083c 0x20000000
|
||||
DATA 4 0x021b0840 0x00000000
|
||||
DATA 4 0x021b08c0 0x24911492
|
||||
DATA 4 0x021b08b8 0x00000800
|
||||
DATA 4 0x021b000c 0x33374133
|
||||
DATA 4 0x021b0004 0x00020024
|
||||
DATA 4 0x021b0010 0x00100A82
|
||||
DATA 4 0x021b0014 0x00000093
|
||||
DATA 4 0x021b0018 0x00001688
|
||||
DATA 4 0x021b002c 0x0f9f26d2
|
||||
DATA 4 0x021b0030 0x0000020e
|
||||
DATA 4 0x021b0038 0x00190778
|
||||
DATA 4 0x021b0008 0x00000000
|
||||
DATA 4 0x021b0040 0x0000004f
|
||||
DATA 4 0x021b0000 0xc3110000
|
||||
DATA 4 0x021b001c 0x003f8030
|
||||
DATA 4 0x021b001c 0xff0a8030
|
||||
DATA 4 0x021b001c 0x82018030
|
||||
DATA 4 0x021b001c 0x04028030
|
||||
DATA 4 0x021b001c 0x02038030
|
||||
DATA 4 0x021b001c 0xff0a8038
|
||||
DATA 4 0x021b001c 0x82018038
|
||||
DATA 4 0x021b001c 0x04028038
|
||||
DATA 4 0x021b001c 0x02038038
|
||||
DATA 4 0x021b0800 0xa1310003
|
||||
DATA 4 0x021b0020 0x00001800
|
||||
DATA 4 0x021b0818 0x00000000
|
||||
DATA 4 0x021b08b8 0x00000800
|
||||
DATA 4 0x021b0004 0x00025564
|
||||
DATA 4 0x021b0404 0x00011006
|
||||
DATA 4 0x021b001c 0x00000000
|
||||
102
board/freescale/mx6slevk/mx6slevk.c
Normal file
102
board/freescale/mx6slevk/mx6slevk.c
Normal file
@ -0,0 +1,102 @@
|
||||
/*
|
||||
* Copyright (C) 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/arch/mx6-pins.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/imx-common/iomux-v3.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/sizes.h>
|
||||
#include <common.h>
|
||||
#include <fsl_esdhc.h>
|
||||
#include <mmc.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
||||
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
||||
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
||||
|
||||
#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
||||
PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
||||
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static iomux_v3_cfg_t const uart1_pads[] = {
|
||||
MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
};
|
||||
|
||||
static iomux_v3_cfg_t const usdhc2_pads[] = {
|
||||
MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
};
|
||||
|
||||
static void setup_iomux_uart(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
||||
}
|
||||
|
||||
static struct fsl_esdhc_cfg usdhc_cfg[1] = {
|
||||
{USDHC2_BASE_ADDR},
|
||||
};
|
||||
|
||||
int board_mmc_getcd(struct mmc *mmc)
|
||||
{
|
||||
return 1; /* Assume boot SD always present */
|
||||
}
|
||||
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
|
||||
|
||||
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
|
||||
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
||||
}
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
setup_iomux_uart();
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* address of boot parameters */
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
u32 get_board_rev(void)
|
||||
{
|
||||
return get_cpu_rev();
|
||||
}
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: MX6SLEVK\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -259,6 +259,7 @@ mx6qarm2 arm armv7 mx6qarm2 freesca
|
||||
mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
|
||||
mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
|
||||
mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
|
||||
mx6slevk arm armv7 mx6slevk freescale mx6 mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL
|
||||
eco5pk arm armv7 eco5pk 8dtech omap3
|
||||
nitrogen6dl arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
|
||||
nitrogen6dl2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048
|
||||
|
||||
189
include/configs/mx6slevk.h
Normal file
189
include/configs/mx6slevk.h
Normal file
@ -0,0 +1,189 @@
|
||||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Configuration settings for the Freescale i.MX6SL EVK board.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/sizes.h>
|
||||
|
||||
#define CONFIG_MX6
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
#define MACH_TYPE_MX6SLEVK 4307
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_MX6SLEVK
|
||||
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_MXC_GPIO
|
||||
|
||||
#define CONFIG_MXC_UART
|
||||
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
|
||||
|
||||
/* MMC Configs */
|
||||
#define CONFIG_FSL_ESDHC
|
||||
#define CONFIG_FSL_USDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_DOS_PARTITION
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
/* Command definition */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#undef CONFIG_CMD_IMLS
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
#define CONFIG_LOADADDR 0x80800000
|
||||
#define CONFIG_SYS_TEXT_BASE 0x87800000
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"script=boot.scr\0" \
|
||||
"uimage=uImage\0" \
|
||||
"console=ttymxc0\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"fdt_file=imx6sl-evk.dtb\0" \
|
||||
"fdt_addr=0x81000000\0" \
|
||||
"boot_fdt=try\0" \
|
||||
"ip_dyn=yes\0" \
|
||||
"mmcdev=0\0" \
|
||||
"mmcpart=2\0" \
|
||||
"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
|
||||
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=${mmcroot}\0" \
|
||||
"loadbootscript=" \
|
||||
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source\0" \
|
||||
"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
|
||||
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if run loadfdt; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi;\0" \
|
||||
"netargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=/dev/nfs " \
|
||||
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
||||
"netboot=echo Booting from net ...; " \
|
||||
"run netargs; " \
|
||||
"if test ${ip_dyn} = yes; then " \
|
||||
"setenv get_cmd dhcp; " \
|
||||
"else " \
|
||||
"setenv get_cmd tftp; " \
|
||||
"fi; " \
|
||||
"${get_cmd} ${uimage}; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi;\0"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"mmc dev ${mmcdev};" \
|
||||
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loaduimage; then " \
|
||||
"run mmcboot; " \
|
||||
"else run netboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else run netboot; fi"
|
||||
|
||||
/* Miscellaneous configurable options */
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT "=> "
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_STACKSIZE SZ_128K
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
#define PHYS_SDRAM_SIZE SZ_1G
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
/* FLASH and environment organization */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_ENV_OFFSET (6 * SZ_64K)
|
||||
#define CONFIG_ENV_SIZE SZ_8K
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
|
||||
#define CONFIG_OF_LIBFDT
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
|
||||
#ifndef CONFIG_SYS_DCACHE_OFF
|
||||
#define CONFIG_CMD_CACHE
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user