mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 04:34:22 +08:00
Marvell Sheevaplug Board support
Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support This patch is tested for- 1. Boot from DRAM/NAND flash 2. File transfer using tftp 3. NAND flash read/write/erase 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for kernel need 6. Boot from USB supported Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
This commit is contained in:
Prafulla Wadaskar
Jean-Christophe PLAGNIOL-VILLARD
parent
462b103873
commit
55dd4ba541
@ -685,6 +685,10 @@ Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
|
||||
|
||||
SFFSDR ARM926EJS
|
||||
|
||||
Prafulla Wadaskar <prafulla@marvell.com>
|
||||
|
||||
sheevaplug ARM926EJS (Kirkwood SoC)
|
||||
|
||||
Richard Woodruff <r-woodruff2@ti.com>
|
||||
|
||||
omap2420h4 ARM1136EJS
|
||||
|
||||
1
MAKEALL
1
MAKEALL
@ -523,6 +523,7 @@ LIST_ARM9=" \
|
||||
omap730p2 \
|
||||
sbc2410x \
|
||||
scb9328 \
|
||||
sheevaplug \
|
||||
smdk2400 \
|
||||
smdk2410 \
|
||||
trab \
|
||||
|
||||
4
Makefile
4
Makefile
@ -2964,6 +2964,9 @@ sbc2410x_config: unconfig
|
||||
scb9328_config : unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
|
||||
|
||||
sheevaplug_config: unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
|
||||
|
||||
smdk2400_config : unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
|
||||
|
||||
@ -3208,7 +3211,6 @@ omap2420h4_config : unconfig
|
||||
qong_config : unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
|
||||
|
||||
|
||||
#########################################################################
|
||||
## ARM1176 Systems
|
||||
#########################################################################
|
||||
|
||||
51
board/Marvell/sheevaplug/Makefile
Normal file
51
board/Marvell/sheevaplug/Makefile
Normal file
@ -0,0 +1,51 @@
|
||||
#
|
||||
# (C) Copyright 2009
|
||||
# Marvell Semiconductor <www.marvell.com>
|
||||
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
# MA 02110-1301 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS := sheevaplug.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak .depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
25
board/Marvell/sheevaplug/config.mk
Normal file
25
board/Marvell/sheevaplug/config.mk
Normal file
@ -0,0 +1,25 @@
|
||||
#
|
||||
# (C) Copyright 2009
|
||||
# Marvell Semiconductor <www.marvell.com>
|
||||
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
# MA 02110-1301 USA
|
||||
#
|
||||
|
||||
TEXT_BASE = 0x00600000
|
||||
155
board/Marvell/sheevaplug/sheevaplug.c
Normal file
155
board/Marvell/sheevaplug/sheevaplug.c
Normal file
@ -0,0 +1,155 @@
|
||||
/*
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <miiphy.h>
|
||||
#include <asm/arch/kirkwood.h>
|
||||
#include <asm/arch/mpp.h>
|
||||
#include "sheevaplug.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/*
|
||||
* default gpio configuration
|
||||
* There are maximum 64 gpios controlled through 2 sets of registers
|
||||
* the below configuration configures mainly initial LED status
|
||||
*/
|
||||
kw_config_gpio(SHEEVAPLUG_OE_VAL_LOW,
|
||||
SHEEVAPLUG_OE_VAL_HIGH,
|
||||
SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH);
|
||||
|
||||
/* Multi-Purpose Pins Functionality configuration */
|
||||
u32 kwmpp_config[] = {
|
||||
MPP0_NF_IO2,
|
||||
MPP1_NF_IO3,
|
||||
MPP2_NF_IO4,
|
||||
MPP3_NF_IO5,
|
||||
MPP4_NF_IO6,
|
||||
MPP5_NF_IO7,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_GPO,
|
||||
MPP8_UART0_RTS,
|
||||
MPP9_UART0_CTS,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP12_SD_CLK,
|
||||
MPP13_SD_CMD,
|
||||
MPP14_SD_D0,
|
||||
MPP15_SD_D1,
|
||||
MPP16_SD_D2,
|
||||
MPP17_SD_D3,
|
||||
MPP18_NF_IO0,
|
||||
MPP19_NF_IO1,
|
||||
MPP20_GPIO,
|
||||
MPP21_GPIO,
|
||||
MPP22_GPIO,
|
||||
MPP23_GPIO,
|
||||
MPP24_GPIO,
|
||||
MPP25_GPIO,
|
||||
MPP26_GPIO,
|
||||
MPP27_GPIO,
|
||||
MPP28_GPIO,
|
||||
MPP29_TSMP9,
|
||||
MPP30_GPIO,
|
||||
MPP31_GPIO,
|
||||
MPP32_GPIO,
|
||||
MPP33_GPIO,
|
||||
MPP34_GPIO,
|
||||
MPP35_GPIO,
|
||||
MPP36_GPIO,
|
||||
MPP37_GPIO,
|
||||
MPP38_GPIO,
|
||||
MPP39_GPIO,
|
||||
MPP40_GPIO,
|
||||
MPP41_GPIO,
|
||||
MPP42_GPIO,
|
||||
MPP43_GPIO,
|
||||
MPP44_GPIO,
|
||||
MPP45_GPIO,
|
||||
MPP46_GPIO,
|
||||
MPP47_GPIO,
|
||||
MPP48_GPIO,
|
||||
MPP49_GPIO,
|
||||
0
|
||||
};
|
||||
kirkwood_mpp_conf(kwmpp_config);
|
||||
|
||||
/*
|
||||
* arch number of board
|
||||
*/
|
||||
gd->bd->bi_arch_number = MACH_TYPE_SHEEVAPLUG;
|
||||
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
|
||||
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
|
||||
gd->bd->bi_dram[i].size = kw_sdram_bs(i);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_RESET_PHY_R
|
||||
/* Configure and enable MV88E1116 PHY */
|
||||
void reset_phy(void)
|
||||
{
|
||||
u16 reg;
|
||||
u16 devadr;
|
||||
char *name = "egiga0";
|
||||
|
||||
if (miiphy_set_current_dev(name))
|
||||
return;
|
||||
|
||||
/* command to read PHY dev address */
|
||||
if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
|
||||
printf("Err..%s could not read PHY dev address\n",
|
||||
__FUNCTION__);
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Enable RGMII delay on Tx and Rx for CPU port
|
||||
* Ref: sec 4.7.2 of chip datasheet
|
||||
*/
|
||||
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
|
||||
miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
|
||||
reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
|
||||
miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
|
||||
miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
|
||||
|
||||
/* reset the phy */
|
||||
miiphy_reset(name, devadr);
|
||||
|
||||
printf("88E1116 Initialized on %s\n", name);
|
||||
}
|
||||
#endif /* CONFIG_RESET_PHY_R */
|
||||
41
board/Marvell/sheevaplug/sheevaplug.h
Normal file
41
board/Marvell/sheevaplug/sheevaplug.h
Normal file
@ -0,0 +1,41 @@
|
||||
/*
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef __SHEEVAPLUG_H
|
||||
#define __SHEEVAPLUG_H
|
||||
|
||||
#define SHEEVAPLUG_OE_LOW (~(0))
|
||||
#define SHEEVAPLUG_OE_HIGH (~(0))
|
||||
#define SHEEVAPLUG_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
|
||||
#define SHEEVAPLUG_OE_VAL_HIGH (1 << 17) /* LED pin high */
|
||||
|
||||
/* PHY related */
|
||||
#define MV88E1116_LED_FCTRL_REG 10
|
||||
#define MV88E1116_CPRSP_CR3_REG 21
|
||||
#define MV88E1116_MAC_CTRL_REG 21
|
||||
#define MV88E1116_PGADR_REG 22
|
||||
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
|
||||
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
|
||||
|
||||
#endif /* __SHEEVAPLUG_H */
|
||||
195
include/configs/sheevaplug.h
Normal file
195
include/configs/sheevaplug.h
Normal file
@ -0,0 +1,195 @@
|
||||
/*
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_SHEEVAPLUG_H
|
||||
#define _CONFIG_SHEEVAPLUG_H
|
||||
|
||||
/*
|
||||
* Version number information
|
||||
*/
|
||||
#define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
#define CONFIG_MARVELL 1
|
||||
#define CONFIG_ARM926EJS 1 /* Basic Architecture */
|
||||
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
|
||||
#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
|
||||
#define CONFIG_KW88F6281 1 /* SOC Name */
|
||||
#define CONFIG_MACH_SHEEVAPLUG /* Machine type */
|
||||
|
||||
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
|
||||
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
|
||||
|
||||
/*
|
||||
* CLKs configurations
|
||||
*/
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
|
||||
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
|
||||
|
||||
/*
|
||||
* Serial Port configuration
|
||||
* The following definitions let you select what serial you want to use
|
||||
* for your console driver.
|
||||
*/
|
||||
|
||||
#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
|
||||
115200,230400, 460800, 921600 }
|
||||
/* auto boot */
|
||||
#define CONFIG_BOOTDELAY 3 /* default enable autoboot */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
|
||||
|
||||
#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
|
||||
+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
|
||||
/*
|
||||
* Commands configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
|
||||
#include <config_cmd_default.h>
|
||||
#define CONFIG_CMD_AUTOSCRIPT
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_ENV
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
/*
|
||||
* NAND configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_KIRKWOOD
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */
|
||||
#define NAND_ALLOW_ERASE_ALL 1
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment variables configurations
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_ENV_IS_IN_NAND 1
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
|
||||
#else
|
||||
#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
|
||||
#endif
|
||||
/*
|
||||
* max 4k env size is enough, but in case of nand
|
||||
* it has to be rounded to sector size
|
||||
*/
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
|
||||
#define CONFIG_ENV_ADDR 0x40000
|
||||
#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */
|
||||
|
||||
/*
|
||||
* Default environment variables
|
||||
*/
|
||||
#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
|
||||
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
|
||||
"${x_bootcmd_usb}; bootm 0x6400000;"
|
||||
|
||||
#define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \
|
||||
"3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
|
||||
"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
|
||||
"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
|
||||
"x_bootcmd_usb=usb start\0" \
|
||||
"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */
|
||||
/* size in bytes reserved for initial data */
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
||||
|
||||
/*
|
||||
* Other required minimal configurations
|
||||
*/
|
||||
#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
|
||||
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
|
||||
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
|
||||
#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
|
||||
#define CONFIG_NR_DRAM_BANKS 4
|
||||
#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
|
||||
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
|
||||
/*
|
||||
* Ethernet Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
||||
#define CONFIG_NET_MULTI /* specify more that one ports available */
|
||||
#define CONFIG_MII /* expose smi ove miiphy interface */
|
||||
#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
|
||||
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
|
||||
#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */
|
||||
#define CONFIG_PHY_BASE_ADR 0
|
||||
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
|
||||
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
|
||||
#endif /* CONFIG_CMD_NET */
|
||||
|
||||
/*
|
||||
* USB/EHCI
|
||||
*/
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
|
||||
#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
|
||||
#define CONFIG_EHCI_IS_TDI
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_ISO_PARTITION
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
#endif /* CONFIG_CMD_USB */
|
||||
|
||||
#endif /* _CONFIG_SHEEVAPLUG_H */
|
||||
Loading…
Reference in New Issue
Block a user