mirrors/u-boot
0
0
Fork 0
mirror of https://github.com/u-boot/u-boot.git synced 2024-12-02 09:03:27 +08:00
Code Issues Packages Projects Releases Wiki Activity

board/ti/dra7xx: add support for parallel NAND

Browse Source 
This patch adds support for x16 NAND device (MT29F2G16AAD) connected to GPMC
chip-select[0] on DRA7xx EVM.
As GPMC pins are shared by multiple devices, so in addition to this patch
following board settings are required for NAND device detection [1]:

  SW5.9 (GPMC_WPN)   = OFF (logic-1)
  SW5.1 (NAND_BOOTn) = ON  (logic-0) /* Active-low */
  SW5.2 (NOR_BOOTn)  = OFF (logic-1)
  SW5.3 (eMMC_BOOTn) = OFF (logic-1)
  SW5.4 (QSPI_BOOTn) = OFF (logic-1)

And also set appropriate SYSBOOT configurations
  SW2.1 (SYSBOOT[0]) = ON  (logic-1) /* selects NAND Boot */
  SW2.2 (SYSBOOT[1]) = OFF (logic-0) /* selects NAND Boot */
  SW2.3 (SYSBOOT[2]) = OFF (logic-0) /* selects NAND Boot */
  SW2.4 (SYSBOOT[3]) = OFF (logic-0) /* selects NAND Boot */
  SW2.5 (SYSBOOT[4]) = ON  (logic-1) /* selects NAND Boot */
  SW2.6 (SYSBOOT[5]) = ON  (logic-1) /* selects NAND Boot */
  SW2.7 (SYSBOOT[6]) = OFF (logic-0) /* reserved */
  SW2.8 (SYSBOOT[7]) = OFF (logic-0) /* reserved */

  SW3.1 (SYSBOOT[ 8])= ON  (logic-1) /* selects SYS_CLK1 speed */
  SW3.2 (SYSBOOT[ 9])= OFF (logic-0) /* selects SYS_CLK1 speed */
  SW3.3 (SYSBOOT[10])= ON  (logic-1) /* wait-pin monitoring = enabled */
  SW3.4 (SYSBOOT[11])= OFF (logic-0) /* device type: Addr/Data Muxed */
  SW3.5 (SYSBOOT[12])= ON  (logic-1) /* device type: Addr/Data Muxed */
  SW3.6 (SYSBOOT[13])= ON  (logic-1) /* device bus-width: 1(x16) */
  SW3.7 (SYSBOOT[14])= OFF (logic-0) /* reserved */
  SW3.8 (SYSBOOT[15])= ON  (logic-1) /* reserved */

Following changes are required in board.cfg to enable NAND on J6-EVM:
This commit is contained in:
pekon gupta 2014-07-22 16:03:23 +05:30 committed by Tom Rini
parent e53ad4b445
commit 54a97d2849
2 changed files with 78 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
board/ti/dra7xx/mux_data.h
View File

@ -68,6 +68,33 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{VIN2A_D21, (IEN | M3)},
{VIN2A_D22, (IEN | M3)},
{VIN2A_D23, (IEN | M3)},
#ifdef CONFIG_NAND
/* NAND / NOR pin-mux */
{GPMC_AD0 , M0 | IEN | PDIS}, /* GPMC_AD0 */
{GPMC_AD1 , M0 | IEN | PDIS}, /* GPMC_AD1 */
{GPMC_AD2 , M0 | IEN | PDIS}, /* GPMC_AD2 */
{GPMC_AD3 , M0 | IEN | PDIS}, /* GPMC_AD3 */
{GPMC_AD4 , M0 | IEN | PDIS}, /* GPMC_AD4 */
{GPMC_AD5 , M0 | IEN | PDIS}, /* GPMC_AD5 */
{GPMC_AD6 , M0 | IEN | PDIS}, /* GPMC_AD6 */
{GPMC_AD7 , M0 | IEN | PDIS}, /* GPMC_AD7 */
{GPMC_AD8 , M0 | IEN | PDIS}, /* GPMC_AD8 */
{GPMC_AD9 , M0 | IEN | PDIS}, /* GPMC_AD9 */
{GPMC_AD10, M0 | IEN | PDIS}, /* GPMC_AD10 */
{GPMC_AD11, M0 | IEN | PDIS}, /* GPMC_AD11 */
{GPMC_AD12, M0 | IEN | PDIS}, /* GPMC_AD12 */
{GPMC_AD13, M0 | IEN | PDIS}, /* GPMC_AD13 */
{GPMC_AD14, M0 | IEN | PDIS}, /* GPMC_AD14 */
{GPMC_AD15, M0 | IEN | PDIS}, /* GPMC_AD15 */
{GPMC_CS0, M0 | IDIS | PEN | PTU}, /* GPMC chip-select */
{GPMC_ADVN_ALE, M0 | IDIS | PEN | PTD}, /* GPMC Addr latch */
{GPMC_OEN_REN, M0 | IDIS | PEN | PTU}, /* GPMC Read enable */
{GPMC_WEN, M0 | IDIS | PEN | PTU}, /* GPMC Write enable_n */
{GPMC_BEN0, M0 | IDIS | PEN | PTD}, /* GPMC Byte/Column En */
{GPMC_WAIT0, M0 | IEN | PEN | PTU}, /* GPMC Wait/Ready */
/* GPMC_WPN (Write Protect) is controlled by DIP Switch SW10(12) */
#else
/* QSPI pin-mux */
{GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */
{GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */
{GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */
@ -78,6 +105,7 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{GPMC_A4, (IEN | PDIS | M1)}, /* QSPI1_CS3 */
{GPMC_CS2, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS0 */
{GPMC_CS3, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS1*/
#endif /* CONFIG_NAND */
{USB2_DRVVBUS, (M0 | IEN | FSC) },
};
#endif /* _MUX_DATA_DRA7XX_H_ */

50
include/configs/dra7xx_evm.h
View File

@ -143,4 +143,54 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
/* NAND support */
#ifdef CONFIG_NAND
/* NAND: device related configs */
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* NAND: driver related configs */
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
26, 27, 28, 29, 30, 31, 32, 33, \
34, 35, 36, 37, 38, 39, 40, 41, \
42, 43, 44, 45, 46, 47, 48, 49, \
50, 51, 52, 53, 54, 55, 56, 57, }
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
#define MTDIDS_DEFAULT "nand0=nand.0"
#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
"128k(NAND.SPL)," \
"128k(NAND.SPL.backup1)," \
"128k(NAND.SPL.backup2)," \
"128k(NAND.SPL.backup3)," \
"256k(NAND.u-boot-spl-os)," \
"1m(NAND.u-boot)," \
"128k(NAND.u-boot-env)," \
"128k(NAND.u-boot-env.backup1)," \
"8m(NAND.kernel)," \
"-(NAND.rootfs)"
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
/* NAND: SPL related configs */
#ifdef CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_AM33XX_BCH
#endif
/* NAND: SPL falcon mode configs */
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
#endif
#endif /* !CONFIG_NAND */
#endif /* __CONFIG_DRA7XX_EVM_H */