bios_emulator: Add vesa support and allow ROMs to be passed in as data

As well as locating the ROM on the PCI bus, allow the ROM to be supplied to
the emulator. Split the init up a little so that callers can supply their
own interrupt routines. Also allow a vesa mode to be provided, to be
selected once the BIOS run is complete.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers/bios_emulator/atibios.c

@@ -46,8 +46,11 @@
 *		BIOS in u-boot.
 ****************************************************************************/
 #include <common.h>
-#include "biosemui.h"
+#include <bios_emul.h>
+#include <errno.h>
 #include <malloc.h>
+#include <vbe.h>
+#include "biosemui.h"
 
 /* Length of the BIOS image */
 #define MAX_BIOSLEN	    (128 * 1024L)
@@ -59,17 +62,54 @@ static u32 saveBaseAddress14;
 static u32 saveBaseAddress18;
 static u32 saveBaseAddress20;
 
+static void atibios_set_vesa_mode(RMREGS *regs, int vesa_mode,
+				  struct vbe_mode_info *mode_info)
+{
+	debug("VBE: Setting VESA mode %#04x\n", vesa_mode);
+	/* request linear framebuffer mode */
+	vesa_mode |= (1 << 14);
+	/* request clearing of framebuffer */
+	vesa_mode &= ~(1 << 15);
+	regs->e.eax = VESA_SET_MODE;
+	regs->e.ebx = vesa_mode;
+	BE_int86(0x10, regs, regs);
+
+	int offset = 0x2000;
+	void *buffer = (void *)(M.mem_base + offset);
+
+	u16 buffer_seg = (((unsigned long)offset) >> 4) & 0xff00;
+	u16 buffer_adr = ((unsigned long)offset) & 0xffff;
+	regs->e.eax = VESA_GET_MODE_INFO;
+	regs->e.ebx = 0;
+	regs->e.ecx = vesa_mode;
+	regs->e.edx = 0;
+	regs->e.esi = buffer_seg;
+	regs->e.edi = buffer_adr;
+	BE_int86(0x10, regs, regs);
+	memcpy(mode_info->mode_info_block, buffer,
+	       sizeof(struct vbe_mode_info));
+	mode_info->valid = true;
+
+	vesa_mode |= (1 << 14);
+	/* request clearing of framebuffer */
+	vesa_mode &= ~(1 << 15);
+	regs->e.eax = VESA_SET_MODE;
+	regs->e.ebx = vesa_mode;
+	BE_int86(0x10, regs, regs);
+}
+
 /****************************************************************************
 PARAMETERS:
 pcidev	- PCI device info for the video card on the bus to boot
-VGAInfo - BIOS emulator VGA info structure
+vga_info - BIOS emulator VGA info structure
 
 REMARKS:
 This function executes the BIOS POST code on the controller. We assume that
 at this stage the controller has its I/O and memory space enabled and
 that all other controllers are in a disabled state.
 ****************************************************************************/
-static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo)
+static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info,
+			   int vesa_mode, struct vbe_mode_info *mode_info)
 {
 	RMREGS regs;
 	RMSREGS sregs;
@@ -84,13 +124,16 @@ static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo * VGAInfo)
 	    ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev);
 
 	/*Setup the X86 emulator for the VGA BIOS*/
-	BE_setVGA(VGAInfo);
+	BE_setVGA(vga_info);
 
 	/*Execute the BIOS POST code*/
 	BE_callRealMode(0xC000, 0x0003, &regs, &sregs);
 
 	/*Cleanup and exit*/
-	BE_getVGA(VGAInfo);
+	BE_getVGA(vga_info);
+
+	if (vesa_mode != -1)
+		atibios_set_vesa_mode(&regs, vesa_mode, mode_info);
 }
 
 /****************************************************************************
@@ -244,49 +287,109 @@ REMARKS:
 Loads and POST's the display controllers BIOS, directly from the BIOS
 image we can extract over the PCI bus.
 ****************************************************************************/
-static int PCI_postController(pci_dev_t pcidev, BE_VGAInfo * VGAInfo)
+static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
+			      BE_VGAInfo *vga_info, int vesa_mode,
+			      struct vbe_mode_info *mode_info)
 {
-	u32 BIOSImageLen;
-	uchar *mappedBIOS;
-	uchar *copyOfBIOS;
+	u32 bios_image_len;
+	uchar *mapped_bios;
+	uchar *copy_of_bios;
 
-	/*Allocate memory to store copy of BIOS from display controller*/
-	if ((mappedBIOS = PCI_mapBIOSImage(pcidev)) == NULL) {
-		printf("videoboot: Video ROM failed to map!\n");
-		return false;
+	if (bios_rom) {
+		copy_of_bios = bios_rom;
+		bios_image_len = bios_len;
+	} else {
+		/*
+		 * Allocate memory to store copy of BIOS from display
+		 * controller
+		 */
+		mapped_bios = PCI_mapBIOSImage(pcidev);
+		if (mapped_bios == NULL) {
+			printf("videoboot: Video ROM failed to map!\n");
+			return false;
+		}
+
+		bios_image_len = mapped_bios[2] * 512;
+
+		copy_of_bios = malloc(bios_image_len);
+		if (copy_of_bios == NULL) {
+			printf("videoboot: Out of memory!\n");
+			return false;
+		}
+		memcpy(copy_of_bios, mapped_bios, bios_image_len);
+		PCI_unmapBIOSImage(pcidev, mapped_bios);
 	}
 
-	BIOSImageLen = mappedBIOS[2] * 512;
-
-	if ((copyOfBIOS = malloc(BIOSImageLen)) == NULL) {
-		printf("videoboot: Out of memory!\n");
-		return false;
-	}
-	memcpy(copyOfBIOS, mappedBIOS, BIOSImageLen);
-
-	PCI_unmapBIOSImage(pcidev, mappedBIOS);
-
-	/*Save information in VGAInfo structure*/
-	VGAInfo->function = PCI_FUNC(pcidev);
-	VGAInfo->device = PCI_DEV(pcidev);
-	VGAInfo->bus = PCI_BUS(pcidev);
-	VGAInfo->pcidev = pcidev;
-	VGAInfo->BIOSImage = copyOfBIOS;
-	VGAInfo->BIOSImageLen = BIOSImageLen;
+	/*Save information in vga_info structure*/
+	vga_info->function = PCI_FUNC(pcidev);
+	vga_info->device = PCI_DEV(pcidev);
+	vga_info->bus = PCI_BUS(pcidev);
+	vga_info->pcidev = pcidev;
+	vga_info->BIOSImage = copy_of_bios;
+	vga_info->BIOSImageLen = bios_image_len;
 
 	/*Now execute the BIOS POST for the device*/
-	if (copyOfBIOS[0] != 0x55 || copyOfBIOS[1] != 0xAA) {
+	if (copy_of_bios[0] != 0x55 || copy_of_bios[1] != 0xAA) {
 		printf("videoboot: Video ROM image is invalid!\n");
 		return false;
 	}
 
-	PCI_doBIOSPOST(pcidev, VGAInfo);
+	PCI_doBIOSPOST(pcidev, vga_info, vesa_mode, mode_info);
 
 	/*Reset the size of the BIOS image to the final size*/
-	VGAInfo->BIOSImageLen = copyOfBIOS[2] * 512;
+	vga_info->BIOSImageLen = copy_of_bios[2] * 512;
 	return true;
 }
 
+int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop)
+{
+	BE_VGAInfo *VGAInfo;
+
+	printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
+	     PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev));
+
+	/*Initialise the x86 BIOS emulator*/
+	if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) {
+		printf("videoboot: Out of memory!\n");
+		return -ENOMEM;
+	}
+	memset(VGAInfo, 0, sizeof(*VGAInfo));
+	BE_init(0, 65536, VGAInfo, 0);
+	*vga_infop = VGAInfo;
+
+	return 0;
+}
+
+void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void))
+{
+	X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func);
+}
+
+int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
+		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
+		struct vbe_mode_info *mode_info)
+{
+	/*Post all the display controller BIOS'es*/
+	if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info,
+				vesa_mode, mode_info))
+		return -EINVAL;
+
+	/*
+	 * Cleanup and exit the emulator if requested. If the BIOS emulator
+	 * is needed after booting the card, we will not call BE_exit and
+	 * leave it enabled for further use (ie: VESA driver etc).
+	*/
+	if (clean_up) {
+		BE_exit();
+		if (vga_info->BIOSImage)
+			free(vga_info->BIOSImage);
+		free(vga_info);
+		vga_info = NULL;
+	}
+
+	return 0;
+}
+
 /****************************************************************************
 PARAMETERS:
 pcidev	    - PCI device info for the video card on the bus to boot
@@ -297,38 +400,21 @@ REMARKS:
 Boots the PCI/AGP video card on the bus using the Video ROM BIOS image
 and the X86 BIOS emulator module.
 ****************************************************************************/
-int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo ** pVGAInfo, int cleanUp)
+int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up)
 {
 	BE_VGAInfo *VGAInfo;
+	int ret;
 
-	printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
-	     PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev));
-
-	/*Initialise the x86 BIOS emulator*/
-	if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) {
-		printf("videoboot: Out of memory!\n");
+	ret = biosemu_setup(pcidev, &VGAInfo);
+	if (ret)
 		return false;
-	}
-	memset(VGAInfo, 0, sizeof(*VGAInfo));
-	BE_init(0, 65536, VGAInfo, 0);
-
-	/*Post all the display controller BIOS'es*/
-	if (!PCI_postController(pcidev, VGAInfo))
+	ret = biosemu_run(pcidev, NULL, 0, VGAInfo, clean_up, -1, NULL);
+	if (ret)
 		return false;
 
-	/*Cleanup and exit the emulator if requested. If the BIOS emulator
-	is needed after booting the card, we will not call BE_exit and
-	leave it enabled for further use (ie: VESA driver etc).
-	*/
-	if (cleanUp) {
-		BE_exit();
-		if (VGAInfo->BIOSImage)
-			free(VGAInfo->BIOSImage);
-		free(VGAInfo);
-		VGAInfo = NULL;
-	}
-	/*Return VGA info pointer if the caller requested it*/
+	/* Return VGA info pointer if the caller requested it*/
 	if (pVGAInfo)
 		*pVGAInfo = VGAInfo;
+
 	return true;
 }

drivers/bios_emulator/besys.c

@@ -713,9 +713,9 @@ through to the real hardware if we don't need to special case it.
 void X86API BE_outl(X86EMU_pioAddr port, u32 val)
 {
 #if !defined(CONFIG_X86EMU_RAW_IO)
-	if (IS_PCI_PORT(port))
+	if (IS_PCI_PORT(port)) {
 		PCI_outp(port, val, REG_WRITE_DWORD);
-	else if (port < 0x100) {
+	} else if (port < 0x100) {
 		DB(printf("WARN: INVALID outl.%04X <- %08X\n", (u16) port,val);)
 		LOG_outpd(port, val);
 	} else

include/bios_emul.h

@@ -55,4 +55,12 @@ void bios_run_on_x86(pci_dev_t pcidev, unsigned long addr, int vesa_mode,
  */
 void bios_set_interrupt_handler(int intnum, int (*int_handler_func)(void));
 
+void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void));
+
+int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo);
+
+int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
+		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
+		struct vbe_mode_info *mode_info);
+
 #endif