powerpc: ep8248: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
This commit is contained in:
Masahiro Yamada 2014-05-30 17:45:01 +09:00 committed by Tom Rini
parent 80bae39aa3
commit 49ad566dfa
7 changed files with 1 additions and 522 deletions

View File

@ -1,8 +0,0 @@
#
# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := ep8248.o

View File

@ -1,254 +0,0 @@
/*
* Copyright (C) 2004 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
*
* Support for Embedded Planet EP8248 boards.
* Tested on EP8248E.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8260.h>
#include <ioports.h>
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
#define CONFIG_SYS_FCC1 (CONFIG_ETHER_ON_FCC1 == 1)
#define CONFIG_SYS_FCC2 (CONFIG_ETHER_ON_FCC2 == 1)
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */
/* PA30 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */
/* PA29 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */
/* PA28 */ { CONFIG_SYS_FCC1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */
/* PA27 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */
/* PA26 */ { CONFIG_SYS_FCC1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */
/* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* PA25 */
/* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* PA24 */
/* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */
/* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
/* PA21 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */
/* PA20 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */
/* PA19 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */
/* PA18 */ { CONFIG_SYS_FCC1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */
/* PA17 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */
/* PA16 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */
/* PA15 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */
/* PA14 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */
/* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */
/* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* PA12 */
/* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */
/* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* PA10 */
/* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TxD */
/* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RxD */
/* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */
/* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */
/* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */
/* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */
/* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */
/* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
/* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */
},
/* Port B */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
/* PB30 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
/* PB29 */ { CONFIG_SYS_FCC2, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
/* PB28 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
/* PB27 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
/* PB26 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
/* PB25 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
/* PB24 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
/* PB23 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
/* PB22 */ { CONFIG_SYS_FCC2, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
/* PB21 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
/* PB20 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
/* PB19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
/* PB18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
/* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
/* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */
/* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */
/* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
/* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
/* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
/* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
/* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
/* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
/* PC22 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 RxClk (CLK10) */
/* PC21 */ { CONFIG_SYS_FCC1, 1, 0, 0, 0, 0 }, /* FCC1 TxClk (CLK11) */
/* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */
/* PC19 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 RxClk (CLK13) */
/* PC18 */ { CONFIG_SYS_FCC2, 1, 0, 0, 0, 0 }, /* FCC2 TxClk (CLK14) */
/* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
/* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */
/* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */
/* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */
/* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */
/* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */
/* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */
/* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */
/* PC9 */ { 1, 0, 0, 1, 0, 1 }, /* MDIO */
/* PC8 */ { 1, 0, 0, 1, 0, 1 }, /* MDC */
/* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
/* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
/* PC5 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TxD */
/* PC4 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RxD */
/* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
/* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
/* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
/* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RxD */
/* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TxD */
/* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */
/* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */
/* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */
/* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */
/* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */
/* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */
/* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */
/* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */
/* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */
/* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */
/* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
/* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
/* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */
/* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */
/* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */
/* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */
/* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */
/* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
}
};
int board_early_init_f (void)
{
vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
bcsr[4] |= 0x30; /* Turn the LEDs off */
#if defined(CONFIG_CONS_ON_SMC) || defined(CONFIG_KGDB_ON_SMC)
bcsr[6] |= 0x10;
#endif
#if defined(CONFIG_CONS_ON_SCC) || defined(CONFIG_KGDB_ON_SCC)
bcsr[7] |= 0x10;
#endif
#if CONFIG_SYS_FCC1
bcsr[8] |= 0xC0;
#endif /* CONFIG_SYS_FCC1 */
#if CONFIG_SYS_FCC2
bcsr[8] |= 0x30;
#endif /* CONFIG_SYS_FCC2 */
return 0;
}
phys_size_t initdram(int board_type)
{
vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
long int msize = 16L << (bcsr[2] & 3);
#ifndef CONFIG_SYS_RAMBOOT
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
vu_char *ramaddr = (vu_char *)CONFIG_SYS_SDRAM_BASE;
uchar c = 0xFF;
uint psdmr = CONFIG_SYS_PSDMR;
int i;
immap->im_siu_conf.sc_ppc_acr = 0x02;
immap->im_siu_conf.sc_ppc_alrh = 0x30126745;
immap->im_siu_conf.sc_tescr1 = 0x00004000;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
/* Initialise 60x bus SDRAM */
memctl->memc_psrt = CONFIG_SYS_PSRT;
memctl->memc_or1 = CONFIG_SYS_SDRAM_OR;
memctl->memc_br1 = CONFIG_SYS_SDRAM_BR;
memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */
*ramaddr = c;
memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */
for (i = 0; i < 8; i++)
*ramaddr = c;
memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; /* Mode Register write */
*ramaddr = c;
memctl->memc_psdmr = psdmr | PSDMR_RFEN; /* Refresh enable */
*ramaddr = c;
#endif /* !CONFIG_SYS_RAMBOOT */
/* Return total 60x bus SDRAM size */
return msize * 1024 * 1024;
}
int checkboard(void)
{
vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
puts("Board: ");
switch (bcsr[0]) {
case 0x0C:
printf("EP8248E 1.0 CPLD revision %d\n", bcsr[1]);
break;
default:
printf("unknown: ID=%02X\n", bcsr[0]);
}
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup( blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */

View File

@ -1242,7 +1242,6 @@ Orphan powerpc mpc5xxx - matrix_vision mvsmr
Orphan powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso <yusdi_santoso@adaptec.com>
Orphan powerpc mpc824x - etin - debris - Sangmoon Kim <dogoil@etinsys.com>
Orphan powerpc mpc824x - etin - kvme080 - Sangmoon Kim <dogoil@etinsys.com>
Orphan powerpc mpc8260 - - ep8248 ep8248 - Yuli Barcohen <yuli@arabellasw.com>
Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK - Anton Vorontsov <avorontsov@ru.mvista.com>
Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK_33 MPC8360ERDK:CLKIN_33MHZ Anton Vorontsov <avorontsov@ru.mvista.com>
Orphan powerpc mpc83xx - matrix_vision mergerbox MERGERBOX - Andre Schwarz <andre.schwarz@matrix-vision.de>

View File

@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
ep8248 powerpc mpc8260 - - Yuli Barcohen <yuli@arabellasw.com>
ispan powerpc mpc8260 - - Yuli Barcohen <yuli@arabellasw.com>
rattler powerpc mpc8260 - - Yuli Barcohen <yuli@arabellasw.com>
zpc1900 powerpc mpc8260 - - Yuli Barcohen <yuli@arabellasw.com>

View File

@ -54,8 +54,6 @@ typedef volatile unsigned char vu_char;
#include <asm/immap_512x.h>
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8247) \
|| defined(CONFIG_MPC8248) \
|| defined(CONFIG_MPC8271) \
|| defined(CONFIG_MPC8272)
#define CONFIG_MPC8272_FAMILY 1
#endif

View File

@ -1,253 +0,0 @@
/*
* Copyright (C) 2004 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
*
* U-Boot configuration for Embedded Planet EP8248 boards.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_MPC8248
#define CPU_ID_STR "MPC8248"
#define CONFIG_EP8248 /* Embedded Planet EP8248 board */
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
#define CONFIG_ENV_OVERWRITE
/*
* Select serial console configuration
*
* If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
* for SCC).
*/
#define CONFIG_CONS_ON_SMC /* Console is on SMC */
#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
#undef CONFIG_CONS_NONE /* It's not on external UART */
#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
#define CONFIG_SYS_BCSR 0xFA000000
/* Pass open firmware flat device tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc/cpm/serial <at> 11a80"
/* Select ethernet configuration */
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
#undef CONFIG_ETHER_NONE /* No external Ethernet */
#define CONFIG_SYS_CPMFCR_RAMTYPE 0
#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
#define CONFIG_HAS_ETH0
#define CONFIG_ETHER_ON_FCC1 1
/* - Rx clock is CLK10
* - Tx clock is CLK11
* - BDs/buffers on 60x bus
* - Full duplex
*/
#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
#define CONFIG_HAS_ETH1
#define CONFIG_ETHER_ON_FCC2 1
/* - Rx clock is CLK13
* - Tx clock is CLK14
* - BDs/buffers on 60x bus
* - Full duplex
*/
#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
#define CONFIG_MII /* MII PHY management */
#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
/*
* GPIO pins used for bit-banged MII communications
*/
#define MDIO_PORT 0 /* Not used - implemented in BCSR */
#define MDIO_ACTIVE (*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB)
#define MDIO_TRISTATE (*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04)
#define MDIO_READ (*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1)
#define MDIO(bit) if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \
else *(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE
#define MDC(bit) if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \
else *(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD
#define MIIDELAY udelay(1)
#ifndef CONFIG_8260_CLKIN
#define CONFIG_8260_CLKIN 66000000 /* in Hz */
#endif
#define CONFIG_BAUDRATE 38400
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm FF860000" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
#endif
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SYS_FLASH_BASE 0xFF800000
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
#define CONFIG_SYS_DIRECT_FLASH_TFTP
#if defined(CONFIG_CMD_JFFS2)
#define CONFIG_SYS_JFFS2_FIRST_BANK 0
#define CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_MAX_FLASH_BANKS
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0
#define CONFIG_SYS_JFFS2_LAST_SECTOR 62
#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
#define CONFIG_SYS_JFFS_CUSTOM_PART
#endif
#if defined(CONFIG_CMD_I2C)
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
#endif
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256KB for Monitor */
#define CONFIG_ENV_IS_IN_FLASH
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#endif /* CONFIG_ENV_IS_IN_FLASH */
#define CONFIG_SYS_DEFAULT_IMMR 0x00010000
#define CONFIG_SYS_IMMR 0xF0000000
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* Hard reset configuration word */
#define CONFIG_SYS_HRCW_MASTER 0x0C40025A /* Not used - provided by FPGA */
/* No slaves */
#define CONFIG_SYS_HRCW_SLAVE1 0
#define CONFIG_SYS_HRCW_SLAVE2 0
#define CONFIG_SYS_HRCW_SLAVE3 0
#define CONFIG_SYS_HRCW_SLAVE4 0
#define CONFIG_SYS_HRCW_SLAVE5 0
#define CONFIG_SYS_HRCW_SLAVE6 0
#define CONFIG_SYS_HRCW_SLAVE7 0
#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define CONFIG_SYS_HID0_INIT 0
#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
#define CONFIG_SYS_HID2 0
#define CONFIG_SYS_SIUMCR 0x01240200
#define CONFIG_SYS_SYPCR 0xFFFF0683
#define CONFIG_SYS_BCR 0x00000000
#define CONFIG_SYS_SCCR SCCR_DFBRG01
#define CONFIG_SYS_RMR RMR_CSRE
#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
#define CONFIG_SYS_RCCR 0
#define CONFIG_SYS_MPTPR 0x1300
#define CONFIG_SYS_PSDMR 0x82672522
#define CONFIG_SYS_PSRT 0x4B
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00001841)
#define CONFIG_SYS_SDRAM_OR 0xFF0030C0
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001801)
#define CONFIG_SYS_OR0_PRELIM 0xFF8008C2
#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_BCSR | 0x00000801)
#define CONFIG_SYS_OR2_PRELIM 0xFFF00864
#define CONFIG_SYS_RESET_ADDRESS 0xC0000000
#endif /* __CONFIG_H */

View File

@ -21,10 +21,6 @@
#if defined(CONFIG_MPC8272_FAMILY)
#ifdef CONFIG_MPC8247
#define CPU_ID_STR "MPC8247"
#elif defined CONFIG_MPC8248
#define CPU_ID_STR "MPC8248"
#elif defined CONFIG_MPC8271
#define CPU_ID_STR "MPC8271"
#else
#define CPU_ID_STR "MPC8272"
#endif