mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-29 15:43:44 +08:00
mx31ads: Delete
This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini
Stefano Babic
parent
bcca8aa9ee
commit
448fc44fb8
@ -444,11 +444,6 @@ config TARGET_X600
|
|||||||
select SUPPORT_SPL
|
select SUPPORT_SPL
|
||||||
select PL011_SERIAL
|
select PL011_SERIAL
|
||||||
|
|
||||||
config TARGET_MX31ADS
|
|
||||||
bool "Support mx31ads"
|
|
||||||
select CPU_ARM1136
|
|
||||||
select BOARD_EARLY_INIT_F
|
|
||||||
|
|
||||||
config TARGET_MX31PDK
|
config TARGET_MX31PDK
|
||||||
bool "Support mx31pdk"
|
bool "Support mx31pdk"
|
||||||
select BOARD_LATE_INIT
|
select BOARD_LATE_INIT
|
||||||
@ -1296,7 +1291,6 @@ source "board/freescale/ls1046ardb/Kconfig"
|
|||||||
source "board/freescale/ls1012aqds/Kconfig"
|
source "board/freescale/ls1012aqds/Kconfig"
|
||||||
source "board/freescale/ls1012ardb/Kconfig"
|
source "board/freescale/ls1012ardb/Kconfig"
|
||||||
source "board/freescale/ls1012afrdm/Kconfig"
|
source "board/freescale/ls1012afrdm/Kconfig"
|
||||||
source "board/freescale/mx31ads/Kconfig"
|
|
||||||
source "board/freescale/mx31pdk/Kconfig"
|
source "board/freescale/mx31pdk/Kconfig"
|
||||||
source "board/freescale/mx35pdk/Kconfig"
|
source "board/freescale/mx35pdk/Kconfig"
|
||||||
source "board/freescale/s32v234evb/Kconfig"
|
source "board/freescale/s32v234evb/Kconfig"
|
||||||
|
|||||||
@ -1,15 +0,0 @@
|
|||||||
if TARGET_MX31ADS
|
|
||||||
|
|
||||||
config SYS_BOARD
|
|
||||||
default "mx31ads"
|
|
||||||
|
|
||||||
config SYS_VENDOR
|
|
||||||
default "freescale"
|
|
||||||
|
|
||||||
config SYS_SOC
|
|
||||||
default "mx31"
|
|
||||||
|
|
||||||
config SYS_CONFIG_NAME
|
|
||||||
default "mx31ads"
|
|
||||||
|
|
||||||
endif
|
|
||||||
@ -1,6 +0,0 @@
|
|||||||
MX31ADS BOARD
|
|
||||||
#M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
|
||||||
S: Orphan (since 2013-09)
|
|
||||||
F: board/freescale/mx31ads/
|
|
||||||
F: include/configs/mx31ads.h
|
|
||||||
F: configs/mx31ads_defconfig
|
|
||||||
@ -1,8 +0,0 @@
|
|||||||
#
|
|
||||||
# Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
obj-y := mx31ads.o
|
|
||||||
obj-y += lowlevel_init.o
|
|
||||||
@ -1,268 +0,0 @@
|
|||||||
/*
|
|
||||||
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <asm/arch/imx-regs.h>
|
|
||||||
|
|
||||||
.macro REG reg, val
|
|
||||||
ldr r2, =\reg
|
|
||||||
ldr r3, =\val
|
|
||||||
str r3, [r2]
|
|
||||||
.endm
|
|
||||||
|
|
||||||
.macro REG8 reg, val
|
|
||||||
ldr r2, =\reg
|
|
||||||
ldr r3, =\val
|
|
||||||
strb r3, [r2]
|
|
||||||
.endm
|
|
||||||
|
|
||||||
.macro DELAY loops
|
|
||||||
ldr r2, =\loops
|
|
||||||
1:
|
|
||||||
subs r2, r2, #1
|
|
||||||
nop
|
|
||||||
bcs 1b
|
|
||||||
.endm
|
|
||||||
|
|
||||||
/* RedBoot: AIPS setup - Only setup MPROTx registers.
|
|
||||||
* The PACR default values are good.*/
|
|
||||||
.macro init_aips
|
|
||||||
/*
|
|
||||||
* Set all MPROTx to be non-bufferable, trusted for R/W,
|
|
||||||
* not forced to user-mode.
|
|
||||||
*/
|
|
||||||
ldr r0, =0x43F00000
|
|
||||||
ldr r1, =0x77777777
|
|
||||||
str r1, [r0, #0x00]
|
|
||||||
str r1, [r0, #0x04]
|
|
||||||
ldr r0, =0x53F00000
|
|
||||||
str r1, [r0, #0x00]
|
|
||||||
str r1, [r0, #0x04]
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Clear the on and off peripheral modules Supervisor Protect bit
|
|
||||||
* for SDMA to access them. Did not change the AIPS control registers
|
|
||||||
* (offset 0x20) access type
|
|
||||||
*/
|
|
||||||
ldr r0, =0x43F00000
|
|
||||||
ldr r1, =0x0
|
|
||||||
str r1, [r0, #0x40]
|
|
||||||
str r1, [r0, #0x44]
|
|
||||||
str r1, [r0, #0x48]
|
|
||||||
str r1, [r0, #0x4C]
|
|
||||||
ldr r1, [r0, #0x50]
|
|
||||||
and r1, r1, #0x00FFFFFF
|
|
||||||
str r1, [r0, #0x50]
|
|
||||||
|
|
||||||
ldr r0, =0x53F00000
|
|
||||||
ldr r1, =0x0
|
|
||||||
str r1, [r0, #0x40]
|
|
||||||
str r1, [r0, #0x44]
|
|
||||||
str r1, [r0, #0x48]
|
|
||||||
str r1, [r0, #0x4C]
|
|
||||||
ldr r1, [r0, #0x50]
|
|
||||||
and r1, r1, #0x00FFFFFF
|
|
||||||
str r1, [r0, #0x50]
|
|
||||||
.endm /* init_aips */
|
|
||||||
|
|
||||||
/* RedBoot: MAX (Multi-Layer AHB Crossbar Switch) setup */
|
|
||||||
.macro init_max
|
|
||||||
ldr r0, =0x43F04000
|
|
||||||
/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
|
|
||||||
ldr r1, =0x00302154
|
|
||||||
str r1, [r0, #0x000] /* for S0 */
|
|
||||||
str r1, [r0, #0x100] /* for S1 */
|
|
||||||
str r1, [r0, #0x200] /* for S2 */
|
|
||||||
str r1, [r0, #0x300] /* for S3 */
|
|
||||||
str r1, [r0, #0x400] /* for S4 */
|
|
||||||
/* SGPCR - always park on last master */
|
|
||||||
ldr r1, =0x10
|
|
||||||
str r1, [r0, #0x010] /* for S0 */
|
|
||||||
str r1, [r0, #0x110] /* for S1 */
|
|
||||||
str r1, [r0, #0x210] /* for S2 */
|
|
||||||
str r1, [r0, #0x310] /* for S3 */
|
|
||||||
str r1, [r0, #0x410] /* for S4 */
|
|
||||||
/* MGPCR - restore default values */
|
|
||||||
ldr r1, =0x0
|
|
||||||
str r1, [r0, #0x800] /* for M0 */
|
|
||||||
str r1, [r0, #0x900] /* for M1 */
|
|
||||||
str r1, [r0, #0xA00] /* for M2 */
|
|
||||||
str r1, [r0, #0xB00] /* for M3 */
|
|
||||||
str r1, [r0, #0xC00] /* for M4 */
|
|
||||||
str r1, [r0, #0xD00] /* for M5 */
|
|
||||||
.endm /* init_max */
|
|
||||||
|
|
||||||
/* RedBoot: M3IF setup */
|
|
||||||
.macro init_m3if
|
|
||||||
/* Configure M3IF registers */
|
|
||||||
ldr r1, =0xB8003000
|
|
||||||
/*
|
|
||||||
* M3IF Control Register (M3IFCTL)
|
|
||||||
* MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000
|
|
||||||
* MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000
|
|
||||||
* MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000
|
|
||||||
* MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000
|
|
||||||
* MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000
|
|
||||||
* MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000
|
|
||||||
* MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040
|
|
||||||
* MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000
|
|
||||||
* ------------
|
|
||||||
* 0x00000040
|
|
||||||
*/
|
|
||||||
ldr r0, =0x00000040
|
|
||||||
str r0, [r1] /* M3IF control reg */
|
|
||||||
.endm /* init_m3if */
|
|
||||||
|
|
||||||
/* RedBoot: To support 133MHz DDR */
|
|
||||||
.macro init_drive_strength
|
|
||||||
/*
|
|
||||||
* Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits
|
|
||||||
* in SW_PAD_CTL registers
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* SDCLK */
|
|
||||||
ldr r1, =0x43FAC200
|
|
||||||
ldr r0, [r1, #0x6C]
|
|
||||||
bic r0, r0, #(1 << 12)
|
|
||||||
str r0, [r1, #0x6C]
|
|
||||||
|
|
||||||
/* CAS */
|
|
||||||
ldr r0, [r1, #0x70]
|
|
||||||
bic r0, r0, #(1 << 22)
|
|
||||||
str r0, [r1, #0x70]
|
|
||||||
|
|
||||||
/* RAS */
|
|
||||||
ldr r0, [r1, #0x74]
|
|
||||||
bic r0, r0, #(1 << 2)
|
|
||||||
str r0, [r1, #0x74]
|
|
||||||
|
|
||||||
/* CS2 (CSD0) */
|
|
||||||
ldr r0, [r1, #0x7C]
|
|
||||||
bic r0, r0, #(1 << 22)
|
|
||||||
str r0, [r1, #0x7C]
|
|
||||||
|
|
||||||
/* DQM3 */
|
|
||||||
ldr r0, [r1, #0x84]
|
|
||||||
bic r0, r0, #(1 << 22)
|
|
||||||
str r0, [r1, #0x84]
|
|
||||||
|
|
||||||
/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */
|
|
||||||
ldr r2, =22 /* (0x2E0 - 0x288) / 4 = 22 */
|
|
||||||
pad_loop:
|
|
||||||
ldr r0, [r1, #0x88]
|
|
||||||
bic r0, r0, #(1 << 22)
|
|
||||||
bic r0, r0, #(1 << 12)
|
|
||||||
bic r0, r0, #(1 << 2)
|
|
||||||
str r0, [r1, #0x88]
|
|
||||||
add r1, r1, #4
|
|
||||||
subs r2, r2, #0x1
|
|
||||||
bne pad_loop
|
|
||||||
.endm /* init_drive_strength */
|
|
||||||
|
|
||||||
/* CPLD on CS4 setup */
|
|
||||||
.macro init_cs4
|
|
||||||
ldr r0, =WEIM_BASE
|
|
||||||
ldr r1, =0x0000D843
|
|
||||||
str r1, [r0, #0x40]
|
|
||||||
ldr r1, =0x22252521
|
|
||||||
str r1, [r0, #0x44]
|
|
||||||
ldr r1, =0x22220A00
|
|
||||||
str r1, [r0, #0x48]
|
|
||||||
.endm /* init_cs4 */
|
|
||||||
|
|
||||||
.globl lowlevel_init
|
|
||||||
lowlevel_init:
|
|
||||||
|
|
||||||
/* Redboot initializes very early AIPS, what for?
|
|
||||||
* Then it also initializes Multi-Layer AHB Crossbar Switch,
|
|
||||||
* M3IF */
|
|
||||||
/* Also setup the Peripheral Port Remap register inside the core */
|
|
||||||
ldr r0, =0x40000015 /* start from AIPS 2GB region */
|
|
||||||
mcr p15, 0, r0, c15, c2, 4
|
|
||||||
|
|
||||||
init_aips
|
|
||||||
|
|
||||||
init_max
|
|
||||||
|
|
||||||
init_m3if
|
|
||||||
|
|
||||||
init_drive_strength
|
|
||||||
|
|
||||||
init_cs4
|
|
||||||
|
|
||||||
/* Image Processing Unit: */
|
|
||||||
/* Too early to switch display on? */
|
|
||||||
REG IPU_CONF, IPU_CONF_DI_EN /* Switch on Display Interface */
|
|
||||||
/* Clock Control Module: */
|
|
||||||
REG CCM_CCMR, 0x074B0BF5 /* Use CKIH, MCU PLL off */
|
|
||||||
|
|
||||||
DELAY 0x40000
|
|
||||||
|
|
||||||
REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE /* MCU PLL on */
|
|
||||||
REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS /* Switch to MCU PLL */
|
|
||||||
|
|
||||||
/* PBC CPLD on CS4 */
|
|
||||||
mov r1, #CS4_BASE
|
|
||||||
ldrh r1, [r1, #0x2]
|
|
||||||
/* Is 27MHz switch set? */
|
|
||||||
ands r1, r1, #0x10
|
|
||||||
|
|
||||||
/* 532-133-66.5 */
|
|
||||||
ldr r0, =CCM_BASE
|
|
||||||
ldr r1, =0xFF871D58
|
|
||||||
/* PDR0 */
|
|
||||||
str r1, [r0, #0x4]
|
|
||||||
ldreq r1, MPCTL_PARAM_532
|
|
||||||
ldrne r1, MPCTL_PARAM_532_27
|
|
||||||
/* MPCTL */
|
|
||||||
str r1, [r0, #0x10]
|
|
||||||
|
|
||||||
/* Set UPLL=240MHz, USB=60MHz */
|
|
||||||
ldr r1, =0x49FCFE7F
|
|
||||||
/* PDR1 */
|
|
||||||
str r1, [r0, #0x8]
|
|
||||||
ldreq r1, UPCTL_PARAM_240
|
|
||||||
ldrne r1, UPCTL_PARAM_240_27
|
|
||||||
/* UPCTL */
|
|
||||||
str r1, [r0, #0x14]
|
|
||||||
/* default CLKO to 1/8 of the ARM core */
|
|
||||||
mov r1, #0x000002C0
|
|
||||||
add r1, r1, #0x00000006
|
|
||||||
/* COSR */
|
|
||||||
str r1, [r0, #0x1c]
|
|
||||||
|
|
||||||
/* RedBoot sets 0x3f, 7, 7, 3, 5, 1, 3, 0 */
|
|
||||||
/* REG CCM_PDR0, PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | PDR0_MCU_PODF(0)*/
|
|
||||||
|
|
||||||
/* Redboot: 0, 51, 10, 12 / 0, 14, 9, 13 */
|
|
||||||
/* REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | PLL_MFN(0x23)*/
|
|
||||||
/* Default: 1, 4, 12, 1 */
|
|
||||||
REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
|
|
||||||
|
|
||||||
/* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */
|
|
||||||
REG 0xB8001010, 0x00000004
|
|
||||||
REG 0xB8001004, 0x006ac73a
|
|
||||||
REG 0xB8001000, 0x92100000
|
|
||||||
REG 0x80000f00, 0x12344321
|
|
||||||
REG 0xB8001000, 0xa2100000
|
|
||||||
REG 0x80000000, 0x12344321
|
|
||||||
REG 0x80000000, 0x12344321
|
|
||||||
REG 0xB8001000, 0xb2100000
|
|
||||||
REG8 0x80000033, 0xda
|
|
||||||
REG8 0x81000000, 0xff
|
|
||||||
REG 0xB8001000, 0x82226080
|
|
||||||
REG 0x80000000, 0xDEADBEEF
|
|
||||||
REG 0xB8001010, 0x0000000c
|
|
||||||
|
|
||||||
mov pc, lr
|
|
||||||
|
|
||||||
MPCTL_PARAM_532:
|
|
||||||
.word (((1-1) << 26) + ((52-1) << 16) + (10 << 10) + (12 << 0))
|
|
||||||
MPCTL_PARAM_532_27:
|
|
||||||
.word (((1-1) << 26) + ((15-1) << 16) + (9 << 10) + (13 << 0))
|
|
||||||
UPCTL_PARAM_240:
|
|
||||||
.word (((2-1) << 26) + ((13-1) << 16) + (9 << 10) + (3 << 0))
|
|
||||||
UPCTL_PARAM_240_27:
|
|
||||||
.word (((2-1) << 26) + ((9 -1) << 16) + (8 << 10) + (8 << 0))
|
|
||||||
@ -1,114 +0,0 @@
|
|||||||
/*
|
|
||||||
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <netdev.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
#include <asm/arch/clock.h>
|
|
||||||
#include <asm/arch/imx-regs.h>
|
|
||||||
#include <asm/arch/sys_proto.h>
|
|
||||||
|
|
||||||
DECLARE_GLOBAL_DATA_PTR;
|
|
||||||
|
|
||||||
int dram_init(void)
|
|
||||||
{
|
|
||||||
/* dram_init must store complete ramsize in gd->ram_size */
|
|
||||||
gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1,
|
|
||||||
PHYS_SDRAM_1_SIZE);
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int board_early_init_f(void)
|
|
||||||
{
|
|
||||||
int i;
|
|
||||||
|
|
||||||
/* CS0: Nor Flash */
|
|
||||||
/*
|
|
||||||
* CS0L and CS0A values are from the RedBoot sources by Freescale
|
|
||||||
* and are also equal to those used by Sascha Hauer for the Phytec
|
|
||||||
* i.MX31 board. CS0U is just a slightly optimized hardware default:
|
|
||||||
* the only non-zero field "Wait State Control" is set to half the
|
|
||||||
* default value.
|
|
||||||
*/
|
|
||||||
static const struct mxc_weimcs cs0 = {
|
|
||||||
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
|
|
||||||
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 0, 0, 0),
|
|
||||||
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
|
|
||||||
CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
|
|
||||||
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
|
|
||||||
CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
|
|
||||||
};
|
|
||||||
|
|
||||||
mxc_setup_weimcs(0, &cs0);
|
|
||||||
|
|
||||||
/* setup pins for UART1 */
|
|
||||||
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
|
|
||||||
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
|
|
||||||
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
|
|
||||||
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
|
|
||||||
|
|
||||||
/* SPI2 */
|
|
||||||
mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
|
|
||||||
mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
|
|
||||||
mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
|
|
||||||
mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
|
|
||||||
mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
|
|
||||||
mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
|
|
||||||
mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
|
|
||||||
|
|
||||||
/* start SPI2 clock */
|
|
||||||
__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
|
|
||||||
|
|
||||||
/* PBC setup */
|
|
||||||
/* Enable UART transceivers also reset the Ethernet/external UART */
|
|
||||||
readw(CS4_BASE + 4);
|
|
||||||
|
|
||||||
writew(0x8023, CS4_BASE + 4);
|
|
||||||
|
|
||||||
/* RedBoot also has an empty loop with 100000 iterations here -
|
|
||||||
* clock doesn't run yet */
|
|
||||||
for (i = 0; i < 100000; i++)
|
|
||||||
;
|
|
||||||
|
|
||||||
/* Clear the reset, toggle the LEDs */
|
|
||||||
writew(0xDF, CS4_BASE + 6);
|
|
||||||
|
|
||||||
/* clock still doesn't run */
|
|
||||||
for (i = 0; i < 100000; i++)
|
|
||||||
;
|
|
||||||
|
|
||||||
/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
|
|
||||||
readb(CS4_BASE + 8);
|
|
||||||
readb(CS4_BASE + 7);
|
|
||||||
readb(CS4_BASE + 8);
|
|
||||||
readb(CS4_BASE + 7);
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int board_init(void)
|
|
||||||
{
|
|
||||||
gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int checkboard(void)
|
|
||||||
{
|
|
||||||
printf("Board: MX31ADS\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef CONFIG_CMD_NET
|
|
||||||
int board_eth_init(bd_t *bis)
|
|
||||||
{
|
|
||||||
int rc = 0;
|
|
||||||
#ifdef CONFIG_CS8900
|
|
||||||
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
|
|
||||||
#endif
|
|
||||||
return rc;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
@ -1,110 +0,0 @@
|
|||||||
/*
|
|
||||||
* January 2004 - Changed to support H4 device
|
|
||||||
* Copyright (c) 2004 Texas Instruments
|
|
||||||
*
|
|
||||||
* (C) Copyright 2002
|
|
||||||
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
|
||||||
OUTPUT_ARCH(arm)
|
|
||||||
ENTRY(_start)
|
|
||||||
SECTIONS
|
|
||||||
{
|
|
||||||
. = 0x00000000;
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
.text :
|
|
||||||
{
|
|
||||||
*(.__image_copy_start)
|
|
||||||
/* WARNING - the following is hand-optimized to fit within */
|
|
||||||
/* the sector layout of our flash chips! XXX FIXME XXX */
|
|
||||||
|
|
||||||
* (.vectors)
|
|
||||||
arch/arm/cpu/arm1136/start.o (.text*)
|
|
||||||
board/freescale/mx31ads/built-in.o (.text*)
|
|
||||||
arch/arm/lib/built-in.o (.text*)
|
|
||||||
net/built-in.o (.text*)
|
|
||||||
drivers/mtd/built-in.o (.text*)
|
|
||||||
|
|
||||||
. = DEFINED(env_offset) ? env_offset : .;
|
|
||||||
env/embedded.o(.text*)
|
|
||||||
|
|
||||||
*(.text*)
|
|
||||||
}
|
|
||||||
. = ALIGN(4);
|
|
||||||
.rodata : { *(.rodata*) }
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
.data : {
|
|
||||||
*(.data*)
|
|
||||||
}
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
.u_boot_list : {
|
|
||||||
KEEP(*(SORT(.u_boot_list*)));
|
|
||||||
}
|
|
||||||
|
|
||||||
. = ALIGN(4);
|
|
||||||
|
|
||||||
.image_copy_end :
|
|
||||||
{
|
|
||||||
*(.__image_copy_end)
|
|
||||||
}
|
|
||||||
|
|
||||||
.rel_dyn_start :
|
|
||||||
{
|
|
||||||
*(.__rel_dyn_start)
|
|
||||||
}
|
|
||||||
|
|
||||||
.rel.dyn : {
|
|
||||||
*(.rel*)
|
|
||||||
}
|
|
||||||
|
|
||||||
.rel_dyn_end :
|
|
||||||
{
|
|
||||||
*(.__rel_dyn_end)
|
|
||||||
}
|
|
||||||
|
|
||||||
.hash : { *(.hash*) }
|
|
||||||
|
|
||||||
.end :
|
|
||||||
{
|
|
||||||
*(.__end)
|
|
||||||
}
|
|
||||||
|
|
||||||
_image_binary_end = .;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
|
|
||||||
* __bss_base and __bss_limit are for linker only (overlay ordering)
|
|
||||||
*/
|
|
||||||
|
|
||||||
.bss_start __rel_dyn_start (OVERLAY) : {
|
|
||||||
KEEP(*(.__bss_start));
|
|
||||||
__bss_base = .;
|
|
||||||
}
|
|
||||||
|
|
||||||
.bss __bss_base (OVERLAY) : {
|
|
||||||
*(.bss*)
|
|
||||||
. = ALIGN(4);
|
|
||||||
__bss_limit = .;
|
|
||||||
}
|
|
||||||
.bss_end __bss_limit (OVERLAY) : {
|
|
||||||
KEEP(*(.__bss_end));
|
|
||||||
}
|
|
||||||
|
|
||||||
.dynsym _image_binary_end : { *(.dynsym) }
|
|
||||||
.dynbss : { *(.dynbss) }
|
|
||||||
.dynstr : { *(.dynstr*) }
|
|
||||||
.dynamic : { *(.dynamic*) }
|
|
||||||
.gnu.hash : { *(.gnu.hash) }
|
|
||||||
.plt : { *(.plt*) }
|
|
||||||
.interp : { *(.interp*) }
|
|
||||||
.gnu : { *(.gnu*) }
|
|
||||||
.ARM.exidx : { *(.ARM.exidx*) }
|
|
||||||
}
|
|
||||||
@ -1,15 +0,0 @@
|
|||||||
CONFIG_ARM=y
|
|
||||||
CONFIG_TARGET_MX31ADS=y
|
|
||||||
CONFIG_SYS_TEXT_BASE=0xA0000000
|
|
||||||
# CONFIG_AUTO_COMPLETE is not set
|
|
||||||
CONFIG_CMD_IMLS=y
|
|
||||||
CONFIG_CMD_SPI=y
|
|
||||||
# CONFIG_CMD_SETEXPR is not set
|
|
||||||
CONFIG_CMD_DHCP=y
|
|
||||||
CONFIG_CMD_PING=y
|
|
||||||
CONFIG_CMD_DATE=y
|
|
||||||
CONFIG_ENV_IS_IN_FLASH=y
|
|
||||||
CONFIG_MXC_GPIO=y
|
|
||||||
# CONFIG_MMC is not set
|
|
||||||
CONFIG_MTD_NOR_FLASH=y
|
|
||||||
CONFIG_MXC_SPI=y
|
|
||||||
@ -1,145 +0,0 @@
|
|||||||
/*
|
|
||||||
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
|
|
||||||
*
|
|
||||||
* Configuration settings for the MX31ADS Freescale board.
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef __CONFIG_H
|
|
||||||
#define __CONFIG_H
|
|
||||||
|
|
||||||
#include <asm/arch/imx-regs.h>
|
|
||||||
|
|
||||||
/* High Level Configuration Options */
|
|
||||||
#define CONFIG_MX31 1 /* This is a mx31 */
|
|
||||||
|
|
||||||
#define CONFIG_MACH_TYPE MACH_TYPE_MX31ADS
|
|
||||||
|
|
||||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
||||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
||||||
#define CONFIG_INITRD_TAG 1
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Size of malloc() pool
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Hardware drivers
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define CONFIG_MXC_UART
|
|
||||||
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
||||||
|
|
||||||
#define CONFIG_HARD_SPI 1
|
|
||||||
#define CONFIG_DEFAULT_SPI_BUS 1
|
|
||||||
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
|
|
||||||
|
|
||||||
/* PMIC Controller */
|
|
||||||
#define CONFIG_POWER
|
|
||||||
#define CONFIG_POWER_SPI
|
|
||||||
#define CONFIG_POWER_FSL
|
|
||||||
#define CONFIG_FSL_PMIC_BUS 1
|
|
||||||
#define CONFIG_FSL_PMIC_CS 0
|
|
||||||
#define CONFIG_FSL_PMIC_CLK 1000000
|
|
||||||
#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
|
|
||||||
#define CONFIG_FSL_PMIC_BITLEN 32
|
|
||||||
#define CONFIG_RTC_MC13XXX
|
|
||||||
|
|
||||||
/* allow to overwrite serial and ethaddr */
|
|
||||||
#define CONFIG_ENV_OVERWRITE
|
|
||||||
#define CONFIG_CONS_INDEX 1
|
|
||||||
|
|
||||||
#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
|
|
||||||
|
|
||||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
||||||
"netdev=eth0\0" \
|
|
||||||
"uboot_addr=0xa0000000\0" \
|
|
||||||
"uboot=mx31ads/u-boot.bin\0" \
|
|
||||||
"kernel=mx31ads/uImage\0" \
|
|
||||||
"nfsroot=/opt/eldk/arm\0" \
|
|
||||||
"bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
|
|
||||||
"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
|
|
||||||
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
||||||
"bootcmd=run bootcmd_net\0" \
|
|
||||||
"bootcmd_net=run bootargs_base bootargs_nfs; " \
|
|
||||||
"tftpboot ${loadaddr} ${kernel}; bootm\0" \
|
|
||||||
"prg_uboot=tftpboot ${loadaddr} ${uboot}; " \
|
|
||||||
"protect off ${uboot_addr} 0xa003ffff; " \
|
|
||||||
"erase ${uboot_addr} 0xa003ffff; " \
|
|
||||||
"cp.b ${loadaddr} ${uboot_addr} ${filesize}; " \
|
|
||||||
"setenv filesize; saveenv\0"
|
|
||||||
|
|
||||||
#define CONFIG_CS8900
|
|
||||||
#define CONFIG_CS8900_BASE 0xb4020300
|
|
||||||
#define CONFIG_CS8900_BUS16 1 /* follow the Linux driver */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* The MX31ADS board seems to have a hardware "peculiarity" confirmed under
|
|
||||||
* U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A
|
|
||||||
* controller inverted. The controller is capable of detecting and correcting
|
|
||||||
* this, but it needs 4 network packets for that. Which means, at startup, you
|
|
||||||
* will not receive answers to the first 4 packest, unless there have been some
|
|
||||||
* broadcasts on the network, or your board is on a hub. Reducing the ARP
|
|
||||||
* timeout from default 5 seconds to 200ms we speed up the initial TFTP
|
|
||||||
* transfer, should the user wish one, significantly.
|
|
||||||
*/
|
|
||||||
#define CONFIG_ARP_TIMEOUT 200UL
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous configurable options
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
|
|
||||||
#define CONFIG_SYS_MEMTEST_END 0x10000
|
|
||||||
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Physical Memory Map
|
|
||||||
*/
|
|
||||||
#define CONFIG_NR_DRAM_BANKS 1
|
|
||||||
#define PHYS_SDRAM_1 CSD0_BASE
|
|
||||||
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
|
|
||||||
|
|
||||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
||||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
||||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
|
||||||
GENERATED_GBL_DATA_SIZE)
|
|
||||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
||||||
CONFIG_SYS_GBL_DATA_OFFSET)
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* FLASH and environment organization
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_FLASH_BASE CS0_BASE
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 262 /* max number of sectors on one chip */
|
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
|
|
||||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */
|
|
||||||
|
|
||||||
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
|
|
||||||
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
||||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
|
||||||
|
|
||||||
/* Address and size of Redundant Environment Sector */
|
|
||||||
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
|
|
||||||
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* CFI FLASH driver setup
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
|
|
||||||
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
|
|
||||||
#define CONFIG_FLASH_SPANSION_S29WS_N 1 /* A non-standard buffered write algorithm */
|
|
||||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
|
|
||||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* JFFS2 partitions
|
|
||||||
*/
|
|
||||||
#define CONFIG_JFFS2_DEV "nor0"
|
|
||||||
|
|
||||||
#endif /* __CONFIG_H */
|
|
||||||
Loading…
Reference in New Issue
Block a user