mirror of
https://github.com/u-boot/u-boot.git
synced 2024-11-24 04:34:22 +08:00
arm64: dts: rockchip: Add Radxa ROCK S0
Radxa ROCK S0 is a single-board computer based on the Rockchip RK3308B SoC in an ultra-compact form factor. Add initial support for eMMC, SD-card, Ethernet, WiFi/BT and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240521212247.1240226-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: adeb5d2a4ba47910238b3c4f5fd960cc0c26a98b ] (cherry picked from commit e291d457b0378f2cb3d3ebb597032ca862cdb973) Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman
Kever Yang
parent
2da44169ab
commit
438a2a7a0c
293
dts/upstream/src/arm64/rockchip/rk3308-rock-s0.dts
Normal file
293
dts/upstream/src/arm64/rockchip/rk3308-rock-s0.dts
Normal file
@ -0,0 +1,293 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3308.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK S0";
|
||||
compatible = "radxa,rock-s0", "rockchip,rk3308";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac;
|
||||
mmc0 = &emmc;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:1500000n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwr_led>;
|
||||
|
||||
led-green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log: regulator-1v04-vdd-log {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1040000>;
|
||||
regulator-max-microvolt = <1040000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_ddr: regulator-1v5-vcc-ddr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-1v8-vcc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
vcc_io: regulator-3v3-vcc-io {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_io";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-5v0-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vdd_core: regulator-vdd-core {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm0 0 5000 1>;
|
||||
pwm-supply = <&vcc5v0_sys>;
|
||||
regulator-name = "vdd_core";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <827000>;
|
||||
regulator-max-microvolt = <1340000>;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_reg_on>;
|
||||
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_core>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
cap-mmc-highspeed;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>;
|
||||
vmmc-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rtl8201f>;
|
||||
phy-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rtl8201f: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac_rst>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
vccio0-supply = <&vcc_io>;
|
||||
vccio1-supply = <&vcc_io>;
|
||||
vccio2-supply = <&vcc_io>;
|
||||
vccio3-supply = <&vcc_io>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtc_32k>;
|
||||
|
||||
bluetooth {
|
||||
bt_reg_on: bt-reg-on {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
host_wake_bt: host-wake-bt {
|
||||
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac {
|
||||
mac_rst: mac-rst {
|
||||
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
pwr_led: pwr-led {
|
||||
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_reg_on: wifi-reg-on {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pin_pull_down>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <50000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_io>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
vmmc-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43430a1-bt";
|
||||
clocks = <&cru SCLK_RTC32K>;
|
||||
clock-names = "lpo";
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wakeup";
|
||||
device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
|
||||
vbat-supply = <&vcc_io>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
dr_mode = "peripheral";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user