ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N

v2019.01 commit cbff9f80ce ("ARM: dts: rmobile: Sync Gen3 DTs with
Linux 4.19.6") made the sdhi/usb nodes available in r8a77965.dtsi.

Hence, remove the SDHI/USB nodes from r8a77965-u-boot.dtsi. This is
equivalent to partially reverting below v2019.01 commits:
 - f529bc551b ("ARM: dts: rmobile: Extract USB nodes on M3N")
 - 830b94f768 ("ARM: dts: rmobile: Extract SDHI nodes on M3N")

Duplicating the nodes from <soc>.dtsi to <soc>-u-boot.dtsi is obviously:
 - not needed if no U-boot-specific changes are needed in those nodes.
 - potentially dangerous/error-prone, since the duplicated properties
   override the properties originally defined in <soc>.dtsi. One
   possible consequence is that <soc>.dtsi is getting an update from
   Linux, while <soc>-u-boot.dtsi stays unchanged. In this situation,
   the obsolete property values from <soc>-u-boot.dtsi will take
   precedence masking some of the <soc>.dtsi updates, potentially
   leading to all kind of obscure issues.

Below is the dtdiff of r8a77965-salvator-x-u-boot.dtb (the only "user"
of r8a77965-u-boot.dtsi) before and after the patch (slightly
reformatted to avoid 'git am/apply' issues and to reduce the width).

What below output means is there is already a mismatch in some of
SDHI/USB nodes between r8a77965.dtsi and r8a77965-u-boot.dtsi. Since no
U-Boot customization is needed in SDHI/USB DT nodes, get rid of them in
r8a77965-u-boot.dtsi.

$> dtdiff before-r8a77965-salvator-x-u-boot.dtb \
           after-r8a77965-salvator-x-u-boot.dtb
 --- /dev/fd/63  2019-03-09 12:57:40.877963983 +0100
 +++ /dev/fd/62  2019-03-09 12:57:40.877963983 +0100
 @@ -1471,7 +1471,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x51 0xc 0x1>;
        clocks = <0x6 0x1 0x13a>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa5 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x4d>;
 @@ -1492,7 +1492,7 @@

      sd@ee120000 {
        clocks = <0x6 0x1 0x139>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa6 0x4>;
        max-frequency = <0xbebc200>;
        power-domains = <0x1 0x20>;
 @@ -1504,7 +1504,7 @@
      sd@ee140000 {
        bus-width = <0x8>;
        clocks = <0x6 0x1 0x138>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        fixed-emmc-driver-type = <0x1>;
        interrupts = <0x0 0xa7 0x4>;
        max-frequency = <0xbebc200>;
 @@ -1526,7 +1526,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x5a 0xf 0x1>;
        clocks = <0x6 0x1 0x137>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa8 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x56>;
 @@ -1868,14 +1868,14 @@

      usb-phy@ee0a0200 {
        #phy-cells = <0x0>;
 -      clocks = <0x6 0x1 0x2be>;
 +      clocks = <0x6 0x1 0x2bf>;
        compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy";
        phandle = <0x47>;
        pinctrl-0 = <0x4c>;
        pinctrl-names = "default";
        power-domains = <0x1 0x20>;
        reg = <0x0 0xee0a0200 0x0 0x700>;
 -      resets = <0x6 0x2be>;
 +      resets = <0x6 0x2bf>;
        status = "okay";
      };

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
This commit is contained in:
Eugeniu Rosca 2019-03-09 14:04:57 +01:00 committed by Marek Vasut
parent d245059ff7
commit 3a4511ce4a

View File

@ -19,103 +19,4 @@
bank-width = <2>;
status = "disabled";
};
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77965";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
power-domains = <&sysc 32>;
resets = <&cpg 314>;
status = "disabled";
};
sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-r8a77965";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
power-domains = <&sysc 32>;
resets = <&cpg 313>;
status = "disabled";
};
sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-r8a77965";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 312>;
max-frequency = <200000000>;
power-domains = <&sysc 32>;
resets = <&cpg 312>;
status = "disabled";
};
sdhi3: sd@ee160000 {
compatible = "renesas,sdhi-r8a77965";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
power-domains = <&sysc 32>;
resets = <&cpg 311>;
status = "disabled";
};
ehci0: usb@ee080100 {
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion= <&ohci0>;
power-domains = <&sysc 32>;
resets = <&cpg 703>;
};
usb2_phy0: usb-phy@ee080200 {
compatible = "renesas,usb2-phy-r8a77965",
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc 32>;
resets = <&cpg 703>;
#phy-cells = <0>;
};
ehci1: usb@ee0a0100 {
compatible = "generic-ehci";
reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
companion= <&ohci1>;
power-domains = <&sysc 32>;
resets = <&cpg 702>;
};
usb2_phy1: usb-phy@ee0a0200 {
compatible = "renesas,usb2-phy-r8a77965",
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc 32>;
resets = <&cpg 702>;
#phy-cells = <0>;
};
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a77965",
"renesas,rcar-gen3-xhci";
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc 32>;
resets = <&cpg 328>;
};
};