diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
index 3d3c48e2473..a798aa0eb99 100644
--- a/arch/arm/mach-zynqmp/include/mach/hardware.h
+++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
@@ -19,6 +19,11 @@
 #define ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_EN_SHIFT	0
 #define ZYNQMP_CRL_APB_BOOT_PIN_CTRL_OUT_VAL_SHIFT	8
 
+#define ZYNQMP_AMS_PS_SYSMON_BASEADDR      0XFFA50800
+#define ZYNQMP_AMS_PS_SYSMON_ANALOG_BUS ((ZYNQMP_AMS_PS_SYSMON_BASEADDR) \
+							    + 0x00000114)
+#define ZYNQMP_PS_SYSMON_ANALOG_BUS_VAL 0x00003210
+
 #define PS_MODE0	BIT(0)
 #define PS_MODE1	BIT(1)
 #define PS_MODE2	BIT(2)
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index d05f0b2e120..ee4d0c85e6b 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -287,6 +287,17 @@ int board_early_init_f(void)
 	if (ret)
 		return ret;
 
+	/*
+	 * PS_SYSMON_ANALOG_BUS register determines mapping between SysMon
+	 * supply sense channel to SysMon supply registers inside the IP.
+	 * This register must be programmed to complete SysMon IP
+	 * configuration. The default register configuration after
+	 * power-up is incorrect. Hence, fix this by writing the
+	 * correct value - 0x3210.
+	 */
+	writel(ZYNQMP_PS_SYSMON_ANALOG_BUS_VAL,
+	       ZYNQMP_AMS_PS_SYSMON_ANALOG_BUS);
+
 	/* Delay is required for clocks to be propagated */
 	udelay(1000000);
 #endif